Subversion Repositories open8_urisc

-- Copyright (c)2013, 2020 Jeremy Seth Henry

-- All rights reserved.

--

-- Redistribution and use in source and binary forms, with or without

-- modification, are permitted provided that the following conditions are met:

--     * Redistributions of source code must retain the above copyright

--       notice, this list of conditions and the following disclaimer.

--     * Redistributions in binary form must reproduce the above copyright

--       notice, this list of conditions and the following disclaimer in the

--       documentation and/or other materials provided with the distribution,

--       where applicable (as part of a user interface, debugging port, etc.)

--

-- THIS SOFTWARE IS PROVIDED BY JEREMY SETH HENRY ``AS IS'' AND ANY

-- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

-- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

-- DISCLAIMED. IN NO EVENT SHALL JEREMY SETH HENRY BE LIABLE FOR ANY

-- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

-- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

-- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

-- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

-- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF

-- THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

--

-- VHDL Units :  o8_ram_1k

-- Description:  Provides a wrapper layer for a 1kx8 RAM model

library ieee;

use ieee.std_logic_1164.all;

use ieee.std_logic_unsigned.all;

use ieee.std_logic_arith.all;

library work;

  use work.open8_pkg.all;

entity o8_ram_1k is

generic(

  Reset_Level           : std_logic;

  Address               : ADDRESS_TYPE

);

port(

  Clock                 : in  std_logic;

  Reset                 : in  std_logic;

  --

  Bus_Address           : in  ADDRESS_TYPE;

  Wr_Enable             : in  std_logic;

  Wr_Data               : in  DATA_TYPE;

  Rd_Enable             : in  std_logic;

  Rd_Data               : out DATA_TYPE

);

end entity;

architecture behave of o8_ram_1k is

  constant User_Addr    : std_logic_vector(15 downto 10)

                          := Address(15 downto 10);

  alias Comp_Addr       is Bus_Address(15 downto 10);

  alias RAM_Addr        is Bus_Address(9 downto 0);

  signal Addr_Match     : std_logic := '0';

  signal Wr_En          : std_logic := '0';

  signal Rd_En          : std_logic := '0';

  signal Rd_Data_i      : DATA_TYPE := OPEN8_NULLBUS;

begin

  -- This decode needs to happen immediately, to give the RAM a chance to

  --  do the lookup before we have to set Rd_Data

  Addr_Match            <= '1' when Comp_Addr = User_Addr else '0';

  Wr_En                 <= Addr_Match and Wr_Enable;

  -- Note that this RAM should be created without an output FF (unregistered Q)

  U_RAM : entity work.ram_1k_core

  port map(

    address             => RAM_Addr,

    clock               => Clock,

    data                => Wr_Data,

    wren                => Wr_En,

    q                   => Rd_Data_i

  );

  RAM_proc: process( Reset, Clock )

  begin

    if( Reset = Reset_Level )then

      Rd_En             <= '0';

      Rd_Data           <= OPEN8_NULLBUS;

    elsif( rising_edge(Clock) )then

      Rd_En             <= Addr_Match and Rd_Enable;

      Rd_Data           <= OPEN8_NULLBUS;

      if( Rd_En = '1' )then

        Rd_Data         <= Rd_Data_i;

      end if;

    end if;

  end process;

end architecture;