URL https://opencores.org/ocsvn/open8_urisc/open8_urisc/trunk
Subversion Repositories open8_urisc

[/] [open8_urisc/] [trunk/] [gnu/] [binutils/] [cpu/] [fr30.cpu] - Blame information for rev 161

Details | Compare with Previous | View Log

; Fujitsu FR30 CPU description.  -*- Scheme -*-
; Copyright 2011 Free Software Foundation, Inc.
;
; Contributed by Red Hat Inc;
;
; This file is part of the GNU Binutils.
;
; This program is free software; you can redistribute it and/or modify
; it under the terms of the GNU General Public License as published by
; the Free Software Foundation; either version 3 of the License, or
; (at your option) any later version.
;
; This program is distributed in the hope that it will be useful,
; but WITHOUT ANY WARRANTY; without even the implied warranty of
; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
; GNU General Public License for more details.
;
; You should have received a copy of the GNU General Public License
; along with this program; if not, write to the Free Software
; Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
; MA 02110-1301, USA.
 
(define-rtl-version 0 8)
 
(include "simplify.inc")
 
; define-arch must appear first
 
(define-arch
  (name fr30) ; name of cpu family
  (comment "Fujitsu FR30")
  (default-alignment forced)
  (insn-lsb0? #f)
  (machs fr30)
  (isas fr30)
)
 
(define-isa
  (name fr30)
  (base-insn-bitsize 16)
  (decode-assist (0 1 2 3 4 5 6 7)) ; Initial bitnumbers to decode insns by.
  (liw-insns 1)       ; The fr30 fetches  1 insn at a time.
  (parallel-insns 1)  ; The fr30 executes 1 insn at a time.
)
 
(define-cpu
  ; cpu names must be distinct from the architecture name and machine names.
  ; The "b" suffix stands for "base" and is the convention.
  ; The "f" suffix stands for "family" and is the convention.
  (name fr30bf)
  (comment "Fujitsu FR30 base family")
  (endian big)
  (word-bitsize 32)
)
 
(define-mach
  (name fr30)
  (comment "Generic FR30 cpu")
  (cpu fr30bf)
)
 
; Model descriptions.
;
(define-model
  (name fr30-1) (comment "fr30-1") (attrs)
  (mach fr30)
 
  (pipeline all "" () ((fetch) (decode) (execute) (writeback)))
 
  ; `state' is a list of variables for recording model state
  (state
   ; bit mask of h-gr registers loaded from memory by previous insn
   (load-regs UINT)
   ; bit mask of h-gr registers loaded from memory by current insn
   (load-regs-pending UINT)
   )
 
  (unit u-exec "Execution Unit" ()
        1 1 ; issue done
        () ; state
        ((Ri INT -1) (Rj INT -1)) ; inputs
        ((Ri INT -1)) ; outputs
        () ; profile action (default)
        )
  (unit u-cti "Branch Unit" ()
        1 1 ; issue done
        () ; state
        ((Ri INT -1)) ; inputs
        ((pc)) ; outputs
        () ; profile action (default)
        )
  (unit u-load "Memory Load Unit" ()
        1 1 ; issue done
        () ; state
        ((Rj INT -1)
         ;(ld-mem AI)
         ) ; inputs
        ((Ri INT -1)) ; outputs
        () ; profile action (default)
        )
  (unit u-store "Memory Store Unit" ()
        1 1 ; issue done
        () ; state
        ((Ri INT -1) (Rj INT -1)) ; inputs
        () ; ((st-mem AI)) ; outputs
        () ; profile action (default)
        )
  (unit u-ldm "LDM Memory Load Unit" ()
        1 1 ; issue done
        () ; state
        ((reglist INT)) ; inputs
        () ; outputs
        () ; profile action (default)
        )
  (unit u-stm "STM Memory Store Unit" ()
        1 1 ; issue done
        () ; state
        ((reglist INT)) ; inputs
        () ; outputs
        () ; profile action (default)
        )
)
 
; The instruction fetch/execute cycle.
;
; This is how to fetch and decode an instruction.
; Leave it out for now
 
; (define-extract (const SI 0))
 
; This is how to execute a decoded instruction.
; Leave it out for now
 
; (define-execute (const SI 0))
 
; Instruction fields.
;
; Attributes:
; PCREL-ADDR: pc relative value (for reloc and disassembly purposes)
; ABS-ADDR: absolute address (for reloc and disassembly purposes?)
; RESERVED: bits are not used to decode insn, must be all 0
 
(dnf f-op1       "1st 4 bits of opcode"  ()  0  4)
(dnf f-op2       "2nd 4 bits of opcode"  ()  4  4)
(dnf f-op3       "3rd 4 bits of opcode"  ()  8  4)
(dnf f-op4       "4th 4 bits of opcode"  () 12  4)
(dnf f-op5       "5th bit of opcode"     ()  4  1)
(dnf f-cc        "condition code"        ()  4  4)
(dnf f-ccc       "coprocessor calc code" () 16  8)
(dnf f-Rj        "register Rj"           ()  8  4)
(dnf f-Ri        "register Ri"           () 12  4)
(dnf f-Rs1       "register Rs"           ()  8  4)
(dnf f-Rs2       "register Rs"           () 12  4)
(dnf f-Rjc       "register Rj"           () 24  4)
(dnf f-Ric       "register Ri"           () 28  4)
(dnf f-CRj       "coprocessor register"  () 24  4)
(dnf f-CRi       "coprocessor register"  () 28  4)
(dnf f-u4        "4 bit 0 extended"      ()  8  4)
(dnf f-u4c       "4 bit 0 extended"      () 12  4)
(df  f-i4        "4 bit sign extended"   ()  8  4 INT #f #f)
(df  f-m4        "4 bit minus extended"  ()  8  4 UINT
     ((value pc) (and WI value (const #xf)))
     ; ??? On a 64 bit host this doesn't get completely sign extended
     ; if the value is recorded in a long, as it is during extraction.
     ; Various fixes exist, pick one.
     ((value pc) (or  WI value (sll WI (const -1) (const 4))))
)
(dnf f-u8        "8 bit unsigned"        ()  8  8)
(dnf f-i8        "8 bit unsigned"        ()  4  8)
 
(dnf  f-i20-4     "upper 4 bits of i20"  ()  8  4)
(dnf  f-i20-16    "lower 16 bits of i20" () 16 16)
(dnmf f-i20       "20 bit unsigned"      () UINT
      (f-i20-4 f-i20-16)
      (sequence () ; insert
                (set (ifield f-i20-4)  (srl (ifield f-i20) (const 16)))
                (set (ifield f-i20-16) (and (ifield f-i20) (const #xffff)))
                )
      (sequence () ; extract
                (set (ifield f-i20) (or (sll (ifield f-i20-4) (const 16))
                                        (ifield f-i20-16)))
                )
)
 
(dnf f-i32       "32 bit immediate"      (SIGN-OPT) 16 32)
 
(df  f-udisp6    "6 bit unsigned offset" ()  8  4 UINT
     ((value pc) (srl UWI value (const 2)))
     ((value pc) (sll UWI value (const 2)))
)
(df  f-disp8     "8 bit signed offset"   ()  4  8 INT #f #f)
(df  f-disp9     "9 bit signed offset"   ()  4  8 INT
    ((value pc) (sra WI value (const 1)))
    ((value pc) (sll WI value (const 1)))
)
(df  f-disp10    "10 bit signed offset"  ()  4  8 INT
     ((value pc) (sra WI value (const 2)))
     ((value pc) (sll WI value (const 2)))
)
(df  f-s10       "10 bit signed offset"  ()  8  8 INT
     ((value pc) (sra WI value (const 2)))
     ((value pc) (sll WI value (const 2)))
)
(df  f-u10       "10 bit unsigned offset" ()  8  8 UINT
     ((value pc) (srl UWI value (const 2)))
     ((value pc) (sll UWI value (const 2)))
)
(df  f-rel9 "9 pc relative signed offset" (PCREL-ADDR) 8 8 INT
     ((value pc) (sra WI (sub WI value (add WI pc (const 2))) (const 1)))
     ((value pc) (add WI (sll WI value (const 1)) (add WI pc (const 2))))
)
(dnf f-dir8      "8  bit direct address"  ()  8  8)
(df  f-dir9      "9  bit direct address"  ()  8  8 UINT
     ((value pc) (srl UWI value (const 1)))
     ((value pc) (sll UWI value (const 1)))
)
(df  f-dir10     "10 bit direct address"  ()  8  8 UINT
     ((value pc) (srl UWI value (const 2)))
     ((value pc) (sll UWI value (const 2)))
)
(df  f-rel12     "12 bit pc relative signed offset" (PCREL-ADDR) 5 11 INT
     ((value pc) (sra WI (sub WI value (add WI pc (const 2))) (const 1)))
     ((value pc) (add WI (sll WI value (const 1)) (add WI pc (const 2))))
)
 
(dnf f-reglist_hi_st  "8 bit register mask for stm" () 8 8)
(dnf f-reglist_low_st "8 bit register mask for stm" () 8 8)
(dnf f-reglist_hi_ld  "8 bit register mask for ldm" () 8 8)
(dnf f-reglist_low_ld "8 bit register mask for ldm" () 8 8)
 
; Enums.
 
; insn-op1: bits 0-3
; FIXME: should use die macro or some such
(define-normal-insn-enum insn-op1 "insn op1 enums" () OP1_ f-op1
  ("0" "1" "2" "3" "4" "5" "6" "7"
   "8" "9" "A" "B" "C" "D" "E" "F")
)
 
; insn-op2: bits 4-7
; FIXME: should use die macro or some such
(define-normal-insn-enum insn-op2 "insn op2 enums" () OP2_ f-op2
  ("0" "1" "2" "3" "4" "5" "6" "7"
   "8" "9" "A" "B" "C" "D" "E" "F")
)
 
; insn-op3: bits 8-11
; FIXME: should use die macro or some such
(define-normal-insn-enum insn-op3 "insn op3 enums" () OP3_ f-op3
  ("0" "1" "2" "3" "4" "5" "6" "7"
   "8" "9" "A" "B" "C" "D" "E" "F")
)
 
; insn-op4: bits 12-15
; FIXME: should use die macro or some such
(define-normal-insn-enum insn-op4 "insn op4 enums" () OP4_ f-op4
  ("0")
)
 
; insn-op5: bit 4 (5th bit origin 0)
; FIXME: should use die macro or some such
(define-normal-insn-enum insn-op5 "insn op5 enums" () OP5_ f-op5
  ("0" "1")
)
 
; insn-cc: condition codes
; FIXME: should use die macro or some such
(define-normal-insn-enum insn-cc "insn cc enums" () CC_ f-cc
  ("ra" "no" "eq" "ne" "c" "nc" "n" "p" "v" "nv" "lt" "ge" "le" "gt" "ls" "hi")
)
 
; Hardware pieces.
; These entries list the elements of the raw hardware.
; They're also used to provide tables and other elements of the assembly
; language.
 
(dnh h-pc "program counter" (PC PROFILE) (pc) () () ())
 
(define-keyword
  (name gr-names)
  (enum-prefix H-GR-)
  (values (r0 0) (r1 1) (r2 2) (r3 3) (r4 4) (r5 5) (r6 6) (r7 7)
          (r8 8) (r9 9) (r10 10) (r11 11) (r12 12) (r13 13) (r14 14) (r15 15)
          (ac 13) (fp 14) (sp 15))
)
 
(define-hardware
  (name h-gr)
  (comment "general registers")
  (attrs PROFILE CACHE-ADDR)
  (type register WI (16))
  (indices extern-keyword gr-names)
)
 
(define-keyword
  (name cr-names)
  (enum-prefix H-CR-)
  (values (cr0 0) (cr1 1) (cr2 2) (cr3 3)
          (cr4 4) (cr5 5) (cr6 6) (cr7 7)
          (cr8 8) (cr9 9) (cr10 10) (cr11 11)
          (cr12 12) (cr13 13) (cr14 14) (cr15 15))
)
 
(define-hardware
  (name h-cr)
  (comment "coprocessor registers")
  (attrs)
  (type register WI (16))
  (indices extern-keyword cr-names)
)
 
(define-keyword
  (name dr-names)
  (enum-prefix H-DR-)
  (values (tbr 0) (rp 1) (ssp 2) (usp 3) (mdh 4) (mdl 5))
)
 
(define-hardware
  (name h-dr)
  (comment "dedicated registers")
  (type register WI (6))
  (indices extern-keyword dr-names)
  (get (index) (c-call WI "@cpu@_h_dr_get_handler" index))
  (set (index newval) (c-call VOID "@cpu@_h_dr_set_handler" index newval))
)
 
(define-hardware
  (name h-ps)
  (comment "processor status")
  (type register UWI)
  (indices keyword "" ((ps 0)))
  (get () (c-call UWI "@cpu@_h_ps_get_handler"))
  (set (newval) (c-call VOID "@cpu@_h_ps_set_handler" newval))
)
 
(dnh h-r13 "General Register 13 explicitly required"
    ()
    (register WI)
    (keyword "" ((r13 0)))
    () ()
)
 
(dnh h-r14 "General Register 14 explicitly required"
    ()
    (register WI)
    (keyword "" ((r14 0)))
    () ()
)
 
(dnh h-r15 "General Register 15 explicitly required"
    ()
    (register WI)
    (keyword "" ((r15 0)))
    () ()
)
 
; These bits are actually part of the PS register but are accessed more
; often than the entire register, so define them directly. We can assemble
; the PS register from its components when necessary.
 
(dsh h-nbit  "negative         bit" ()           (register BI))
(dsh h-zbit  "zero             bit" ()           (register BI))
(dsh h-vbit  "overflow         bit" ()           (register BI))
(dsh h-cbit  "carry            bit" ()           (register BI))
(dsh h-ibit  "interrupt enable bit" ()           (register BI))
(define-hardware
  (name h-sbit)
  (comment "stack bit")
  (type register BI)
  (get () (c-call BI "@cpu@_h_sbit_get_handler"))
  (set (newval) (c-call VOID "@cpu@_h_sbit_set_handler" newval))
)
(dsh h-tbit  "trace trap       bit" ()           (register BI))
(dsh h-d0bit "division 0       bit" ()           (register BI))
(dsh h-d1bit "division 1       bit" ()           (register BI))
 
; These represent sub-registers within the program status register
 
(define-hardware
  (name h-ccr)
  (comment "condition code bits")
  (type register UQI)
  (get () (c-call UQI "@cpu@_h_ccr_get_handler"))
  (set (newval) (c-call VOID "@cpu@_h_ccr_set_handler" newval))
)
(define-hardware
  (name h-scr)
  (comment "system condition bits")
  (type register UQI)
  (get () (c-call UQI "@cpu@_h_scr_get_handler"))
  (set (newval) (c-call VOID "@cpu@_h_scr_set_handler" newval))
)
(define-hardware
  (name h-ilm)
  (comment "interrupt level mask")
  (type register UQI)
  (get () (c-call UQI "@cpu@_h_ilm_get_handler"))
  (set (newval) (c-call VOID "@cpu@_h_ilm_set_handler" newval))
)
 
; Instruction Operands.
; These entries provide a layer between the assembler and the raw hardware
; description, and are used to refer to hardware elements in the semantic
; code.  Usually there's a bit of over-specification, but in more complicated
; instruction sets there isn't.
 
; FR30 specific operand attributes:
 
(define-attr
  (for operand)
  (type boolean)
  (name HASH-PREFIX)
  (comment "immediates have an optional '#' prefix")
)
 
; ??? Convention says this should be o-sr, but then the insn definitions
; should refer to o-sr which is clumsy.  The "o-" could be implicit, but
; then it should be implicit for all the symbols here, but then there would
; be confusion between (f-)simm8 and (h-)simm8.
; So for now the rule is exactly as it appears here.
 
(dnop Ri      "destination register"         ()            h-gr   f-Ri)
(dnop Rj      "source register"              ()            h-gr   f-Rj)
(dnop Ric     "target register coproc insn"  ()            h-gr   f-Ric)
(dnop Rjc     "source register coproc insn"  ()            h-gr   f-Rjc)
(dnop CRi     "coprocessor register"         ()            h-cr   f-CRi)
(dnop CRj     "coprocessor register"         ()            h-cr   f-CRj)
(dnop Rs1     "dedicated register"           ()            h-dr   f-Rs1)
(dnop Rs2     "dedicated register"           ()            h-dr   f-Rs2)
(dnop R13     "General Register 13"          ()            h-r13  f-nil)
(dnop R14     "General Register 14"          ()            h-r14  f-nil)
(dnop R15     "General Register 15"          ()            h-r15  f-nil)
(dnop ps      "Program Status register"      ()            h-ps   f-nil)
(dnop u4      "4  bit unsigned immediate"    (HASH-PREFIX) h-uint f-u4)
(dnop u4c     "4  bit unsigned immediate"    (HASH-PREFIX) h-uint f-u4c)
(dnop u8      "8  bit unsigned immediate"    (HASH-PREFIX) h-uint f-u8)
(dnop i8      "8  bit unsigned immediate"    (HASH-PREFIX) h-uint f-i8)
(dnop udisp6  "6  bit unsigned immediate"    (HASH-PREFIX) h-uint f-udisp6)
(dnop disp8   "8  bit signed   immediate"    (HASH-PREFIX) h-sint f-disp8)
(dnop disp9   "9  bit signed   immediate"    (HASH-PREFIX) h-sint f-disp9)
(dnop disp10  "10 bit signed   immediate"    (HASH-PREFIX) h-sint f-disp10)
 
(dnop s10     "10 bit signed   immediate"    (HASH-PREFIX) h-sint f-s10)
(dnop u10     "10 bit unsigned immediate"    (HASH-PREFIX) h-uint f-u10)
(dnop i32     "32 bit immediate"             (HASH-PREFIX) h-uint f-i32)
 
(define-operand
  (name m4)
  (comment "4  bit negative immediate")
  (attrs HASH-PREFIX)
  (type h-sint)
  (index f-m4)
  (handlers (print "m4"))
)
 
(define-operand
  (name i20)
  (comment "20 bit immediate")
  (attrs HASH-PREFIX)
  (type h-uint)
  (index f-i20)
)
 
(dnop dir8    "8  bit direct address"        ()  h-uint f-dir8)
(dnop dir9    "9  bit direct address"        ()  h-uint f-dir9)
(dnop dir10   "10 bit direct address"        ()  h-uint f-dir10)
 
(dnop label9  "9  bit pc relative address"   ()  h-iaddr f-rel9)
(dnop label12 "12 bit pc relative address"   ()  h-iaddr f-rel12)
 
(define-operand
  (name    reglist_low_ld)
  (comment "8 bit low register mask for ldm")
  (attrs)
  (type    h-uint)
  (index   f-reglist_low_ld)
  (handlers (parse "low_register_list_ld")
            (print "low_register_list_ld"))
)
 
(define-operand
  (name    reglist_hi_ld)
  (comment "8 bit high register mask for ldm")
  (attrs)
  (type    h-uint)
  (index   f-reglist_hi_ld)
  (handlers (parse "hi_register_list_ld")
            (print "hi_register_list_ld"))
)
 
(define-operand
  (name    reglist_low_st)
  (comment "8 bit low register mask for stm")
  (attrs)
  (type    h-uint)
  (index   f-reglist_low_st)
  (handlers (parse "low_register_list_st")
            (print "low_register_list_st"))
)
 
(define-operand
  (name    reglist_hi_st)
  (comment "8 bit high register mask for stm")
  (attrs)
  (type    h-uint)
  (index   f-reglist_hi_st)
  (handlers (parse "hi_register_list_st")
            (print "hi_register_list_st"))
)
 
(dnop cc   "condition codes"  ()            h-uint f-cc)
(dnop ccc  "coprocessor calc" (HASH-PREFIX) h-uint f-ccc)
 
(dnop nbit  "negative   bit"       (SEM-ONLY) h-nbit  f-nil)
(dnop vbit  "overflow   bit"       (SEM-ONLY) h-vbit  f-nil)
(dnop zbit  "zero       bit"       (SEM-ONLY) h-zbit  f-nil)
(dnop cbit  "carry      bit"       (SEM-ONLY) h-cbit  f-nil)
(dnop ibit  "interrupt  bit"       (SEM-ONLY) h-ibit  f-nil)
(dnop sbit  "stack      bit"       (SEM-ONLY) h-sbit  f-nil)
(dnop tbit  "trace trap bit"       (SEM-ONLY) h-tbit  f-nil)
(dnop d0bit "division 0 bit"       (SEM-ONLY) h-d0bit f-nil)
(dnop d1bit "division 1 bit"       (SEM-ONLY) h-d1bit f-nil)
 
(dnop ccr  "condition code bits"   (SEM-ONLY) h-ccr  f-nil)
(dnop scr  "system condition bits" (SEM-ONLY) h-scr  f-nil)
(dnop ilm  "interrupt level mask"  (SEM-ONLY) h-ilm  f-nil)
 
; Instruction definitions.
;
; Notes:
; - dni is short for "define-normal-instruction"
 
; FR30 specific insn attributes:
 
(define-attr
  (for insn)
  (type boolean)
  (name NOT-IN-DELAY-SLOT)
  (comment "insn can't go in delay slot")
)
 
; Sets zbit and nbit based on the value of x
;
(define-pmacro (set-z-and-n x)
  (sequence ()
            (set zbit (eq x (const 0)))
            (set nbit (lt x (const 0))))
)
 
; Binary integer instruction which sets status bits
;
(define-pmacro (binary-int-op name insn comment opc1 opc2 op arg1 arg2)
  (dni name
       (.str insn " " comment)
       ()
       (.str insn " $" arg1 ",$" arg2)
       (+ opc1 opc2 arg1 arg2)
       (sequence ()
                 (set vbit ((.sym op -oflag) arg2 arg1 (const 0)))
                 (set cbit ((.sym op -cflag) arg2 arg1 (const 0)))
                 (set arg2 (op arg2 arg1))
                 (set-z-and-n arg2))
       ()
  )
)
 
; Binary integer instruction which does *not* set status bits
;
(define-pmacro (binary-int-op-n name insn comment opc1 opc2 op arg1 arg2)
  (dni name
       (.str insn " " comment)
       ()
       (.str insn " $" arg1 ",$" arg2)
       (+ opc1 opc2 arg1 arg2)
       (set arg2 (op arg2 arg1))
       ()
  )
)
 
; Binary integer instruction with carry which sets status bits
;
(define-pmacro (binary-int-op-c name insn comment opc1 opc2 op arg1 arg2)
  (dni name
       (.str insn " " comment)
       ()
       (.str insn " $" arg1 ",$" arg2)
       (+ opc1 opc2 arg1 arg2)
       (sequence ((WI tmp))
                 (set tmp  ((.sym op c)      arg2 arg1 cbit))
                 (set vbit ((.sym op -oflag) arg2 arg1 cbit))
                 (set cbit ((.sym op -cflag) arg2 arg1 cbit))
                 (set arg2 tmp)
                 (set-z-and-n arg2))
       ()
  )
)
 
(binary-int-op   add   add   "reg/reg"   OP1_A OP2_6 add Rj Ri)
(binary-int-op   addi  add   "immed/reg" OP1_A OP2_4 add u4 Ri)
(binary-int-op   add2  add2  "immed/reg" OP1_A OP2_5 add m4 Ri)
(binary-int-op-c addc  addc  "reg/reg"   OP1_A OP2_7 add Rj Ri)
(binary-int-op-n addn  addn  "reg/reg"   OP1_A OP2_2 add Rj Ri)
(binary-int-op-n addni addn  "immed/reg" OP1_A OP2_0 add u4 Ri)
(binary-int-op-n addn2 addn2 "immed/reg" OP1_A OP2_1 add m4 Ri)
 
(binary-int-op   sub   sub   "reg/reg"   OP1_A OP2_C sub Rj Ri)
(binary-int-op-c subc  subc  "reg/reg"   OP1_A OP2_D sub Rj Ri)
(binary-int-op-n subn  subn  "reg/reg"   OP1_A OP2_E sub Rj Ri)
 
; Integer compare instruction
;
(define-pmacro (int-cmp name insn comment opc1 opc2 arg1 arg2)
  (dni name
       (.str insn " " comment)
       ()
       (.str insn " $" arg1 ",$" arg2)
       (+ opc1 opc2 arg1 arg2)
       (sequence ((WI tmp1))
                 (set vbit (sub-oflag arg2 arg1 (const 0)))
                 (set cbit (sub-cflag arg2 arg1 (const 0)))
                 (set tmp1 (sub       arg2 arg1))
                 (set-z-and-n tmp1)
       )
       ()
  )
)
 
(int-cmp cmp  cmp  "reg/reg"   OP1_A OP2_A Rj Ri)
(int-cmp cmpi cmp  "immed/reg" OP1_A OP2_8 u4 Ri)
(int-cmp cmp2 cmp2 "immed/reg" OP1_A OP2_9 m4 Ri)
 
; Binary logical instruction
;
(define-pmacro (binary-logical-op name insn comment opc1 opc2 op arg1 arg2)
  (dni name
       (.str insn " " comment)
       ()
       (.str insn " $" arg1 ",$" arg2)
       (+ opc1 opc2 arg1 arg2)
       (sequence ()
                 (set arg2 (op arg2 arg1))
                 (set-z-and-n arg2))
       ()
  )
)
 
(binary-logical-op and and "reg/reg" OP1_8 OP2_2 and Rj Ri)
(binary-logical-op or  or  "reg/reg" OP1_9 OP2_2 or  Rj Ri)
(binary-logical-op eor eor "reg/reg" OP1_9 OP2_A xor Rj Ri)
 
(define-pmacro (les-units model) ; les: load-exec-store
  (model (unit u-exec) (unit u-load) (unit u-store))
)
 
; Binary logical instruction to memory
;
(define-pmacro (binary-logical-op-m name insn comment opc1 opc2 mode op arg1 arg2)
  (dni name
       (.str insn " " comment)
       (NOT-IN-DELAY-SLOT)
       (.str insn " $" arg1 ",@$" arg2)
       (+ opc1 opc2 arg1 arg2)
       (sequence ((mode tmp))
                 (set mode tmp (op mode (mem mode arg2) arg1))
                 (set-z-and-n tmp)
                 (set mode (mem mode arg2) tmp))
       ((les-units fr30-1))
  )
)
 
(binary-logical-op-m andm and  "reg/mem" OP1_8 OP2_4 WI and Rj Ri)
(binary-logical-op-m andh andh "reg/mem" OP1_8 OP2_5 HI and Rj Ri)
(binary-logical-op-m andb andb "reg/mem" OP1_8 OP2_6 QI and Rj Ri)
(binary-logical-op-m orm  or   "reg/mem" OP1_9 OP2_4 WI or  Rj Ri)
(binary-logical-op-m orh  orh  "reg/mem" OP1_9 OP2_5 HI or  Rj Ri)
(binary-logical-op-m orb  orb  "reg/mem" OP1_9 OP2_6 QI or  Rj Ri)
(binary-logical-op-m eorm eor  "reg/mem" OP1_9 OP2_C WI xor Rj Ri)
(binary-logical-op-m eorh eorh "reg/mem" OP1_9 OP2_D HI xor Rj Ri)
(binary-logical-op-m eorb eorb "reg/mem" OP1_9 OP2_E QI xor Rj Ri)
 
; Binary logical instruction to low half of byte in memory
;
(dni bandl
     "bandl #u4,@Ri"
     (NOT-IN-DELAY-SLOT)
     "bandl $u4,@$Ri"
     (+ OP1_8 OP2_0 u4 Ri)
     (set QI (mem QI Ri)
           (and QI
                 (or  QI u4 (const #xf0))
                 (mem QI Ri)))
     ((les-units fr30-1))
)
 
(dni borl
     "borl #u4,@Ri"
     (NOT-IN-DELAY-SLOT)
     "borl $u4,@$Ri"
     (+ OP1_9 OP2_0 u4 Ri)
     (set QI (mem QI Ri) (or QI u4 (mem QI Ri)))
     ((les-units fr30-1))
)
 
(dni beorl
     "beorl #u4,@Ri"
     (NOT-IN-DELAY-SLOT)
     "beorl $u4,@$Ri"
     (+ OP1_9 OP2_8 u4 Ri)
     (set QI (mem QI Ri) (xor QI u4 (mem QI Ri)))
     ((les-units fr30-1))
)
 
; Binary logical instruction to high half of byte in memory
;
(dni bandh
     "bandh #u4,@Ri"
     (NOT-IN-DELAY-SLOT)
     "bandh $u4,@$Ri"
     (+ OP1_8 OP2_1 u4 Ri)
     (set QI (mem QI Ri)
           (and QI
                 (or QI (sll QI u4 (const 4)) (const #x0f))
                 (mem QI Ri)))
     ((les-units fr30-1))
)
 
(define-pmacro (binary-or-op-mh name insn opc1 opc2 op arg1 arg2)
  (dni name
       (.str name " #" arg1 ",@" args)
       (NOT-IN-DELAY-SLOT)
       (.str name " $" arg1 ",@$" arg2)
       (+ opc1 opc2 arg1 arg2)
       (set QI (mem QI arg2)
             (insn QI
                   (sll QI arg1 (const 4))
                   (mem QI arg2)))
       ((les-units fr30-1))
  )
)
 
(binary-or-op-mh borh  or  OP1_9 OP2_1 or  u4 Ri)
(binary-or-op-mh beorh xor OP1_9 OP2_9 xor u4 Ri)
 
(dni btstl
     "btstl #u4,@Ri"
     (NOT-IN-DELAY-SLOT)
     "btstl $u4,@$Ri"
     (+ OP1_8 OP2_8 u4 Ri)
     (sequence ((QI tmp))
               (set tmp (and QI u4 (mem QI Ri)))
               (set zbit (eq tmp (const 0)))
               (set nbit (const 0)))
     ((fr30-1 (unit u-load) (unit u-exec (cycles 2))))
)
 
(dni btsth
     "btsth #u4,@Ri"
     (NOT-IN-DELAY-SLOT)
     "btsth $u4,@$Ri"
     (+ OP1_8 OP2_9 u4 Ri)
     (sequence ((QI tmp))
               (set tmp (and QI (sll QI u4 (const 4)) (mem QI Ri)))
               (set zbit (eq tmp (const 0)))
               (set nbit (lt tmp (const 0))))
     ((fr30-1 (unit u-load) (unit u-exec (cycles 2))))
)
 
(dni mul
     "mul Rj,Ri"
     (NOT-IN-DELAY-SLOT)
     "mul $Rj,$Ri"
     (+ OP1_A OP2_F Rj Ri)
     (sequence ((DI tmp))
               (set tmp (mul DI (ext DI Rj) (ext DI Ri)))
               (set (reg h-dr 5) (trunc WI tmp))
               (set (reg h-dr 4) (trunc WI (srl tmp (const 32))))
               (set nbit (lt (reg h-dr 5) (const 0)))
               (set zbit (eq tmp (const DI 0)))
               (set vbit (orif
                          (gt  tmp (const DI #x7fffffff))
                          (lt  tmp (neg (const DI #x80000000))))))
     ((fr30-1 (unit u-exec (cycles 5))))
)
 
(dni mulu
     "mulu Rj,Ri"
     (NOT-IN-DELAY-SLOT)
     "mulu $Rj,$Ri"
     (+ OP1_A OP2_B Rj Ri)
     (sequence ((DI tmp))
               (set tmp (mul DI (zext DI Rj) (zext DI Ri)))
               (set (reg h-dr 5) (trunc WI tmp))
               (set (reg h-dr 4) (trunc WI (srl tmp (const 32))))
               (set nbit (lt (reg h-dr 4) (const 0)))
               (set zbit (eq (reg h-dr 5) (const 0)))
               (set vbit (ne (reg h-dr 4) (const 0))))
     ((fr30-1 (unit u-exec (cycles 5))))
)
 
(dni mulh
     "mulh Rj,Ri"
     (NOT-IN-DELAY-SLOT)
     "mulh $Rj,$Ri"
     (+ OP1_B OP2_F Rj Ri)
     (sequence ()
               (set (reg h-dr 5) (mul (trunc HI Rj) (trunc HI Ri)))
               (set nbit (lt (reg h-dr 5) (const 0)))
               (set zbit (ge (reg h-dr 5) (const 0))))
     ((fr30-1 (unit u-exec (cycles 3))))
)
 
(dni muluh
     "muluh Rj,Ri"
     (NOT-IN-DELAY-SLOT)
     "muluh $Rj,$Ri"
     (+ OP1_B OP2_B Rj Ri)
     (sequence ()
               (set (reg h-dr 5) (mul (and Rj (const #xffff))
                                      (and Ri (const #xffff))))
               (set nbit (lt (reg h-dr 5) (const 0)))
               (set zbit (ge (reg h-dr 5) (const 0))))
     ((fr30-1 (unit u-exec (cycles 3))))
)
 
(dni div0s
     "div0s Ri"
     ()
     "div0s $Ri"
     (+ OP1_9 OP2_7 OP3_4 Ri)
     (sequence ()
               (set d0bit (lt (reg h-dr 5) (const 0)))
               (set d1bit (xor d0bit (lt Ri (const 0))))
               (if (ne d0bit (const 0))
                   (set (reg h-dr 4) (const #xffffffff))
                   (set (reg h-dr 4) (const 0))))
     ()
)
 
(dni div0u
     "div0u Ri"
     ()
     "div0u $Ri"
     (+ OP1_9 OP2_7 OP3_5 Ri)
     (sequence ()
               (set d0bit (const 0))
               (set d1bit (const 0))
               (set (reg h-dr 4) (const 0)))
     ()
)
 
(dni div1
     "div1 Ri"
     ()
     "div1 $Ri"
     (+ OP1_9 OP2_7 OP3_6 Ri)
     (sequence ((WI tmp))
               (set (reg h-dr 4) (sll (reg h-dr 4) (const 1)))
               (if (lt (reg h-dr 5) (const 0))
                   (set (reg h-dr 4) (add (reg h-dr 4) (const 1))))
               (set (reg h-dr 5) (sll (reg h-dr 5) (const 1)))
               (if (eq d1bit (const 1))
                   (sequence ()
                             (set tmp  (add       (reg h-dr 4) Ri))
                             (set cbit (add-cflag (reg h-dr 4) Ri (const 0))))
                   (sequence ()
                             (set tmp  (sub       (reg h-dr 4) Ri))
                             (set cbit (sub-cflag (reg h-dr 4) Ri (const 0)))))
               (if (not (xor (xor d0bit d1bit) cbit))
                   (sequence ()
                             (set (reg h-dr 4) tmp)
                             (set (reg h-dr 5) (or (reg h-dr 5) (const 1)))))
               (set zbit (eq (reg h-dr 4) (const 0))))
     ()
)
 
(dni div2
     "div2 Ri"
     ()
     "div2 $Ri"
     (+ OP1_9 OP2_7 OP3_7 Ri)
     (sequence ((WI tmp))
               (if (eq d1bit (const 1))
                   (sequence ()
                             (set tmp  (add       (reg h-dr 4) Ri))
                             (set cbit (add-cflag (reg h-dr 4) Ri (const 0))))
                   (sequence ()
                             (set tmp  (sub       (reg h-dr 4) Ri))
                             (set cbit (sub-cflag (reg h-dr 4) Ri (const 0)))))
               (if (eq tmp (const 0))
                   (sequence ()
                             (set zbit (const 1))
                             (set (reg h-dr 4) (const 0)))
                   (set zbit (const 0))))
     ()
)
 
(dni div3
     "div3"
     ()
     "div3"
     (+ OP1_9 OP2_F OP3_6 OP4_0)
     (if (eq zbit (const 1))
         (set (reg h-dr 5) (add (reg h-dr 5) (const 1))))
     ()
)
 
(dni div4s
     "div4s"
     ()
     "div4s"
     (+ OP1_9 OP2_F OP3_7 OP4_0)
     (if (eq d1bit (const 1))
         (set (reg h-dr 5) (neg (reg h-dr 5))))
     ()
)
 
(define-pmacro (leftshift-op name insn opc1 opc2 arg1 arg2 shift-expr)
  (dni name
       (.str insn " " arg1 "," arg2)
       ()
       (.str insn " $" arg1 ",$" arg2)
       (+ opc1 opc2 arg1 arg2)
       (sequence ((WI shift))
                 (set shift shift-expr)
                 (if (ne shift (const 0))
                     (sequence ()
                               (set cbit (ne (and arg2
                                                  (sll (const 1)
                                                       (sub (const 32) shift)))
                                             (const 0)))
                               (set arg2 (sll arg2 shift)))
                     (set cbit (const 0)))
                 (set nbit (lt arg2 (const 0)))
                 (set zbit (eq arg2 (const 0))))
       ()
  )
)
(leftshift-op  lsl   lsl   OP1_B OP2_6 Rj Ri (and Rj (const #x1f)))
(leftshift-op  lsli  lsl   OP1_B OP2_4 u4 Ri u4)
(leftshift-op  lsl2  lsl2  OP1_B OP2_5 u4 Ri (add u4 (const #x10)))
 
(define-pmacro (rightshift-op name insn opc1 opc2 op arg1 arg2 shift-expr)
  (dni name
       (.str insn " " arg1 "," arg2)
       ()
       (.str insn " $" arg1 ",$" arg2)
       (+ opc1 opc2 arg1 arg2)
       (sequence ((WI shift))
                 (set shift shift-expr)
                 (if (ne shift (const 0))
                     (sequence ()
                               (set cbit (ne (and arg2
                                                  (sll (const 1)
                                                       (sub shift (const 1))))
                                             (const 0)))
                               (set arg2 (op arg2 shift)))
                     (set cbit (const 0)))
                 (set nbit (lt arg2 (const 0)))
                 (set zbit (eq arg2 (const 0))))
       ()
  )
)
(rightshift-op lsr  lsr  OP1_B OP2_2 srl Rj Ri (and Rj (const #x1f)))
(rightshift-op lsri lsr  OP1_B OP2_0 srl u4 Ri u4)
(rightshift-op lsr2 lsr2 OP1_B OP2_1 srl u4 Ri (add u4 (const #x10)))
(rightshift-op asr  asr  OP1_B OP2_A sra Rj Ri (and Rj (const #x1f)))
(rightshift-op asri asr  OP1_B OP2_8 sra u4 Ri u4)
(rightshift-op asr2 asr2 OP1_B OP2_9 sra u4 Ri (add u4 (const #x10)))
 
(dni ldi8
     "load 8 bit unsigned immediate"
     ()
     "ldi:8 $i8,$Ri"
     (+ OP1_C i8 Ri)
     (set Ri i8)
     ()
)
 
; Typing ldi:8 in in emacs is a pain.
(dnmi ldi8m "ldi:8 without the colon"
      (NO-DIS)
      "ldi8 $i8,$Ri"
      (emit ldi8 i8 Ri)
)
 
(dni ldi20
     "load 20 bit unsigned immediate"
     (NOT-IN-DELAY-SLOT)
     "ldi:20 $i20,$Ri"
     (+ OP1_9 OP2_B Ri i20)
     (set Ri i20)
     ((fr30-1 (unit u-exec (cycles 2))))
)
 
; Typing ldi:20 in in emacs is a pain.
(dnmi ldi20m "ldi:20 without the colon"
      (NO-DIS)
      "ldi20 $i20,$Ri"
      (emit ldi20 i20 Ri)
)
 
(dni ldi32
     "load 32 bit immediate"
     (NOT-IN-DELAY-SLOT)
     "ldi:32 $i32,$Ri"
     (+ OP1_9 OP2_F OP3_8 Ri i32)
     (set Ri i32)
     ((fr30-1 (unit u-exec (cycles 3))))
)
 
; Typing ldi:32 in in emacs is a pain.
(dnmi ldi32m "ldi:32 without the colon"
      (NO-DIS)
      "ldi32 $i32,$Ri"
      (emit ldi32 i32 Ri)
)
 
(define-pmacro (basic-ld name insn opc1 opc2 mode arg1 arg2)
  (dni name
       (.str name " @" arg1 "," arg2)
       ()
       (.str name " @$" arg1 ",$" arg2)
       (+ opc1 opc2 arg1 arg2)
       (set arg2 (mem mode arg1))
       ((fr30-1 (unit u-load)))
  )
)
 
(basic-ld ld   ld   OP1_0 OP2_4 WI  Rj Ri)
(basic-ld lduh lduh OP1_0 OP2_5 UHI Rj Ri)
(basic-ld ldub ldub OP1_0 OP2_6 UQI Rj Ri)
 
(define-pmacro (r13base-ld name insn opc1 opc2 mode arg1 arg2)
  (dni name
       (.str insn " @(R13," arg1 ")," arg2)
       ()
       (.str insn " @($R13,$" arg1 "),$" arg2)
       (+ opc1 opc2 arg1 arg2)
       (set arg2 (mem mode (add arg1 (reg h-gr 13))))
       ((fr30-1 (unit u-load)))
  )
)
 
(r13base-ld ldr13   ld   OP1_0 OP2_0 WI  Rj Ri)
(r13base-ld ldr13uh lduh OP1_0 OP2_1 UHI Rj Ri)
(r13base-ld ldr13ub ldub OP1_0 OP2_2 UQI Rj Ri)
 
(define-pmacro (r14base-ld name insn opc1 mode arg1 arg2)
  (dni name
       (.str insn " @(R14," arg1 ")," arg2)
       ()
       (.str insn " @($R14,$" arg1 "),$" arg2)
       (+ opc1 arg1 arg2)
       (set arg2 (mem mode (add arg1 (reg h-gr 14))))
       ((fr30-1 (unit u-load)))
  )
)
 
(r14base-ld ldr14   ld   OP1_2 WI  disp10 Ri)
(r14base-ld ldr14uh lduh OP1_4 UHI disp9  Ri)
(r14base-ld ldr14ub ldub OP1_6 UQI disp8  Ri)
 
(dni ldr15
     "ld @(R15,udisp6),Ri mem/reg"
     ()
     "ld @($R15,$udisp6),$Ri"
     (+ OP1_0 OP2_3 udisp6 Ri)
     (set Ri (mem WI (add udisp6 (reg h-gr 15))))
     ((fr30-1 (unit u-load)))
)
 
(dni ldr15gr
     "ld @R15+,Ri"
     ()
     "ld @$R15+,$Ri"
     (+ OP1_0 OP2_7 OP3_0 Ri)
     (sequence ()
               (set Ri (mem WI (reg h-gr 15)))
               (if (ne (ifield f-Ri) (const 15))
                   (set (reg h-gr 15) (add (reg h-gr 15) (const 4)))))
     ((fr30-1 (unit u-load)))
)
 
; This insn loads a value from where r15 points into the target register and
; then increments r15. If the target register is also r15, then the post
; increment is not performed.
;
(dni ldr15dr
     "ld @R15+,Rs2"
     ()
     "ld @$R15+,$Rs2"
     (+ OP1_0 OP2_7 OP3_8 Rs2)
; This seems more straight forward, but doesn't work due to a problem in
; cgen. We're trying to not increment r15 if it is the target register.
;     (sequence ()
;              (set Rs2 (mem WI (reg h-gr 15)))
;              (if (not (or (and (eq (ifield f-Rs2) (const 2))
;                                (eq sbit (const 0)))
;                           (and (eq (ifield f-Rs2) (const 3))
;                                (eq sbit (const 1)))))
;                  (set (reg h-gr 15) (add (reg h-gr 15) (const 4)))
;              )
;     )
     (sequence ((WI tmp))
               (set tmp (mem WI (reg h-gr 15))) ; save in case target is r15
               (set (reg h-gr 15) (add (reg h-gr 15) (const 4)))
               (set Rs2 tmp))
     ((fr30-1 (unit u-load)))
)
 
(dni ldr15ps
     "ld @R15+,ps mem/reg"
     (NOT-IN-DELAY-SLOT)
     "ld @$R15+,$ps"
     (+ OP1_0 OP2_7 OP3_9 OP4_0)
     (sequence ()
               (set ps (mem WI (reg h-gr 15)))
               (set (reg h-gr 15) (add (reg h-gr 15) (const 4))))
     ((fr30-1 (unit u-load)))
)
 
(define-pmacro (basic-st name insn opc1 opc2 mode arg1 arg2)
  (dni name
       (.str name " " arg1 ",@" arg2)
       ()
       (.str name " $" arg1 ",@$" arg2)
       (+ opc1 opc2 arg1 arg2)
       (set (mem mode arg2) arg1)
       ((fr30-1 (unit u-store)))
  )
)
 
(basic-st st  st  OP1_1 OP2_4 WI Ri Rj)
(basic-st sth sth OP1_1 OP2_5 HI Ri Rj)
(basic-st stb stb OP1_1 OP2_6 QI Ri Rj)
 
(define-pmacro (r13base-st name insn opc1 opc2 mode arg1 arg2)
  (dni name
       (.str insn " " arg1 ",@(R13," arg2 ")")
       ()
       (.str insn " $" arg1 ",@($R13,$" arg2 ")")
       (+ opc1 opc2 arg1 arg2)
       (set (mem mode (add arg2 (reg h-gr 13))) arg1)
       ((fr30-1 (unit u-store)))
  )
)
 
(r13base-st str13  st  OP1_1 OP2_0 WI Ri Rj)
(r13base-st str13h sth OP1_1 OP2_1 HI Ri Rj)
(r13base-st str13b stb OP1_1 OP2_2 QI Ri Rj)
 
(define-pmacro (r14base-st name insn opc1 mode arg1 arg2)
  (dni name
       (.str insn " " arg1 ",@(R14," arg2 ")")
       ()
       (.str insn " $" arg1 ",@($R14,$" arg2 ")")
       (+ opc1 arg1 arg2)
       (set (mem mode (add arg2 (reg h-gr 14))) arg1)
       ((fr30-1 (unit u-store)))
  )
)
 
(r14base-st str14  st  OP1_3 WI  Ri disp10)
(r14base-st str14h sth OP1_5 HI  Ri disp9)
(r14base-st str14b stb OP1_7 QI  Ri disp8)
 
(dni str15
     "st Ri,@(R15,udisp6) reg/mem"
     ()
     "st $Ri,@($R15,$udisp6)"
     (+ OP1_1 OP2_3 udisp6 Ri)
     (set (mem WI (add (reg h-gr 15) udisp6)) Ri)
     ((fr30-1 (unit u-store)))
)
 
; These store insns predecrement r15 and then store the contents of the source
; register where r15 then points. If the source register is also r15, then the
; original value of r15 is stored.
;
(dni str15gr
     "st Ri,@-R15 reg/mem"
     ()
     "st $Ri,@-$R15"
     (+ OP1_1 OP2_7 OP3_0 Ri)
     (sequence ((WI tmp))
               (set tmp Ri) ; save in case it's r15
               (set (reg h-gr 15) (sub (reg h-gr 15) (const 4)))
               (set (mem WI (reg h-gr 15)) tmp))
     ((fr30-1 (unit u-store)))
)
 
(dni str15dr
     "st Rs,@-R15 reg/mem"
     ()
     "st $Rs2,@-$R15"
     (+ OP1_1 OP2_7 OP3_8 Rs2)
     (sequence ((WI tmp))
               (set tmp Rs2) ; save in case it's r15
               (set (reg h-gr 15) (sub (reg h-gr 15) (const 4)))
               (set (mem WI (reg h-gr 15)) tmp))
     ((fr30-1 (unit u-store)))
)
 
(dni str15ps
     "st ps,@-R15 reg/mem"
     ()
     "st $ps,@-$R15"
     (+ OP1_1 OP2_7 OP3_9 OP4_0)
     (sequence ()
               (set (reg h-gr 15) (sub (reg h-gr 15) (const 4)))
               (set (mem WI (reg h-gr 15)) ps))
     ((fr30-1 (unit u-store)))
)
 
(define-pmacro (mov2gr name opc1 opc2 arg1 arg2)
  (dni name
       (.str "mov " arg1 "," arg2)
       ()
       (.str "mov $" arg1 ",$" arg2)
       (+ opc1 opc2 arg1 arg2)
       (set arg2 arg1)
       ()
  )
)
 
(mov2gr mov   OP1_8 OP2_B Rj Ri)
(mov2gr movdr OP1_B OP2_7 Rs1 Ri)
 
(dni movps
     "mov ps,Ri reg/reg"
     ()
     "mov $ps,$Ri"
     (+ OP1_1 OP2_7 OP3_1 Ri)
     (set Ri ps)
     ()
)
 
(dni mov2dr
     "mov Ri,Rs reg/reg"
     ()
     "mov $Ri,$Rs1"
     (+ OP1_B OP2_3 Rs1 Ri)
     (set Rs1 Ri)
     ()
)
 
(dni mov2ps
     "mov Ri,ps reg/reg"
     ()
     "mov $Ri,$ps"
     (+ OP1_0 OP2_7 OP3_1 Ri)
     (set ps Ri)
     ()
)
 
(dni jmp
     "jmp with no delay slot"
     (NOT-IN-DELAY-SLOT)
     "jmp @$Ri"
     (+ OP1_9 OP2_7 OP3_0 Ri)
     (set pc Ri)
     ((fr30-1 (unit u-cti)))
)
 
(dni jmpd "jmp with delay slot"
     (NOT-IN-DELAY-SLOT)
     "jmp:d @$Ri"
     (+ OP1_9 OP2_F OP3_0 Ri)
     (delay (const 1)
            (set pc Ri))
     ((fr30-1 (unit u-cti)))
)
 
; These versions which use registers must appear before the other
; versions which use relative addresses due to a problem in cgen
; - DB.
(dni callr
     "call @Ri"
     (NOT-IN-DELAY-SLOT)
     "call @$Ri"
     (+ OP1_9 OP2_7 OP3_1 Ri)
     (sequence ()
               (set (reg h-dr 1) (add pc (const 2)))
               (set pc Ri))
     ((fr30-1 (unit u-cti)))
)
(dni callrd
     "call:d @Ri"
     (NOT-IN-DELAY-SLOT)
     "call:d @$Ri"
     (+ OP1_9 OP2_F OP3_1 Ri)
     (delay (const 1)
            (sequence ()
                      (set (reg h-dr 1) (add pc (const 4)))
                      (set pc Ri)))
     ((fr30-1 (unit u-cti)))
)
; end of reordered insns
 
(dni call
     "call relative to pc"
     (NOT-IN-DELAY-SLOT)
     "call $label12"
     (+ OP1_D OP5_0 label12)
     (sequence ()
               (set (reg h-dr 1) (add pc (const 2)))
               (set pc label12))
     ((fr30-1 (unit u-cti)))
)
(dni calld
     "call relative to pc"
     (NOT-IN-DELAY-SLOT)
     "call:d $label12"
     (+ OP1_D OP5_1 label12)
     (delay (const 1)
            (sequence ()
                      (set (reg h-dr 1) (add pc (const 4)))
                      (set pc label12)))
     ((fr30-1 (unit u-cti)))
)
 
(dni ret
     "return from subroutine"
     (NOT-IN-DELAY-SLOT)
     "ret"
     (+ OP1_9 OP2_7 OP3_2 OP4_0)
     (set pc (reg h-dr 1))
     ((fr30-1 (unit u-cti)))
)
 
(dni ret:d
     "return from subroutine with delay slot"
     (NOT-IN-DELAY-SLOT)
     "ret:d"
     (+ OP1_9 OP2_F OP3_2 OP4_0)
     (delay (const 1)
            (set pc (reg h-dr 1)))
     ((fr30-1 (unit u-cti)))
)
 
(dni int
     "interrupt"
     (NOT-IN-DELAY-SLOT)
     "int $u8"
     (+ OP1_1 OP2_F u8)
     (sequence ()
               ; This is defered to fr30_int because for the breakpoint case
               ; we want to change as little of the machine state as possible.
               ; Push PS onto the system stack
               ;(set  (reg h-dr 2) (sub (reg h-dr 2) (const 4)))
               ;(set UWI (mem UWI (reg h-dr 2)) ps)
               ; Push the return address onto the system stack
               ;(set  (reg h-dr 2) (sub (reg h-dr 2) (const 4)))
               ;(set UWI (mem UWI (reg h-dr 2)) (add pc (const 2)))
               ; Set status bits
               ;(set ibit (const 0))
               ;(set sbit (const 0))
 
               ; We still should indicate what is modified by this insn.
               (clobber (reg h-dr 2))
               (clobber ibit)
               (clobber sbit)
               ; ??? (clobber memory)?
 
               ; fr30_int handles operating vs user mode
               (set WI pc (c-call WI "fr30_int" pc u8))
     )
     ; This is more properly a cti, but branch stall calculation is different.
     ((fr30-1 (unit u-exec (cycles 6))))
)
 
(dni inte
     "interrupt for emulator"
     (NOT-IN-DELAY-SLOT)
     "inte"
     (+ OP1_9 OP2_F OP3_3 OP4_0)
     (sequence ()
               ; This is defered to fr30_inte because for the breakpoint case
               ; we want to change as little of the machine state as possible.
               ; Push PS onto the system stack
               ;(set  (reg h-dr 2) (sub (reg h-dr 2) (const 4)))
               ;(set UWI (mem UWI (reg h-dr 2)) ps)
               ; Push the return address onto the system stack
               ;(set  (reg h-dr 2) (sub (reg h-dr 2) (const 4)))
               ;(set UWI (mem UWI (reg h-dr 2)) (add pc (const 2)))
               ; Set status bits
               ;(set ibit (const 0))
               ;(set ilm  (const 4))
 
               ; We still should indicate what is modified by this insn.
               (clobber (reg h-dr 2))
               (clobber ibit)
               (clobber ilm)
               ; ??? (clobber memory)?
 
               ; fr30_int handles operating vs user mode
               (set WI pc (c-call WI "fr30_inte" pc))
     )
     ; This is more properly a cti, but branch stall calculation is different.
     ((fr30-1 (unit u-exec (cycles 6))))
)
 
(dni reti
     "return from interrupt"
     (NOT-IN-DELAY-SLOT)
     "reti"
     (+ OP1_9 OP2_7 OP3_3 OP4_0)
     (if (eq sbit (const 0))
         (sequence ()
                   ; Pop the return address from the system stack
                   (set UWI pc (mem UWI (reg h-dr 2)))
                   (set  (reg h-dr 2) (add (reg h-dr 2) (const 4)))
                   ; Pop PS from the system stack
                   (set UWI ps (mem UWI (reg h-dr 2)))
                   (set  (reg h-dr 2) (add (reg h-dr 2) (const 4)))
         )
         (sequence ()
                   ; Pop the return address from the user stack
                   (set UWI pc (mem UWI (reg h-dr 3)))
                   (set  (reg h-dr 3) (add (reg h-dr 3) (const 4)))
                   ; Pop PS from the user stack
                   (set UWI ps (mem UWI (reg h-dr 3)))
                   (set  (reg h-dr 3) (add (reg h-dr 3) (const 4)))
         )
     )
     ; This is more properly a cti, but branch stall calculation is different.
     ((fr30-1 (unit u-exec (cycles 4))))
)
 
; Conditional branches with and without delay slots
;
(define-pmacro (cond-branch cc condition)
  (begin
    (dni (.sym b cc d)
         (.str (.sym b cc :d) " label9")
         (NOT-IN-DELAY-SLOT)
         (.str (.sym b cc :d) " $label9")
         (+ OP1_F (.sym CC_ cc) label9)
         (delay (const 1)
                (if condition (set pc label9)))
         ((fr30-1 (unit u-cti)))
    )
    (dni (.sym b cc)
         (.str (.sym b cc) " label9")
         (NOT-IN-DELAY-SLOT)
         (.str (.sym b cc) " $label9")
         (+ OP1_E (.sym CC_ cc) label9)
         (if condition (set pc label9))
         ((fr30-1 (unit u-cti)))
    )
  )
)
 
(cond-branch ra (const BI 1))
(cond-branch no (const BI 0))
(cond-branch eq      zbit)
(cond-branch ne (not zbit))
(cond-branch c       cbit)
(cond-branch nc (not cbit))
(cond-branch n       nbit)
(cond-branch p  (not nbit))
(cond-branch v       vbit)
(cond-branch nv (not vbit))
(cond-branch lt      (xor vbit nbit))
(cond-branch ge (not (xor vbit nbit)))
(cond-branch le      (or (xor vbit nbit) zbit))
(cond-branch gt (not (or (xor vbit nbit) zbit)))
(cond-branch ls      (or cbit zbit))
(cond-branch hi (not (or cbit zbit)))
 
(define-pmacro (dir2r13 name insn opc1 opc2 mode arg1)
  (dni name
       (.str insn " @" arg1 ",R13")
       ()
       (.str insn " @$" arg1 ",$R13")
       (+ opc1 opc2 arg1)
       (set (reg h-gr 13) (mem mode arg1))
       ((fr30-1 (unit u-load)))
  )
)
 
(define-pmacro (dir2r13-postinc name insn opc1 opc2 mode arg1 incr)
  (dni name
       (.str insn " @" arg1 ",@R13+")
       (NOT-IN-DELAY-SLOT)
       (.str insn " @$" arg1 ",@$R13+")
       (+ opc1 opc2 arg1)
       (sequence ()
                 (set (mem mode (reg h-gr 13)) (mem mode arg1))
                 (set (reg h-gr 13) (add (reg h-gr 13) incr)))
       ((fr30-1 (unit u-load) (unit u-store)))
  )
)
 
(define-pmacro (r132dir name insn opc1 opc2 mode arg1)
  (dni name
       (.str insn " R13,@" arg1)
       ()
       (.str insn " $R13,@$" arg1)
       (+ opc1 opc2 arg1)
       (set (mem mode arg1) (reg h-gr 13))
       ((fr30-1 (unit u-store)))
  )
)
 
(define-pmacro (r13-postinc2dir name insn opc1 opc2 mode arg1 incr)
  (dni name
       (.str insn " @R13+,@" arg1)
       (NOT-IN-DELAY-SLOT)
       (.str insn " @$R13+,@$" arg1)
       (+ opc1 opc2 arg1)
       (sequence ()
                 (set (mem mode arg1) (mem mode (reg h-gr 13)))
                 (set (reg h-gr 13) (add (reg h-gr 13) incr)))
       ((fr30-1 (unit u-load) (unit u-store)))
  )
)
 
; These versions which move from reg to mem must appear before the other
; versions which use immediate addresses due to a problem in cgen
; - DB.
(r132dir dmovr13  dmov  OP1_1 OP2_8 WI dir10)
(r132dir dmovr13h dmovh OP1_1 OP2_9 HI dir9)
(r132dir dmovr13b dmovb OP1_1 OP2_A QI dir8)
 
(r13-postinc2dir dmovr13pi  dmov  OP1_1 OP2_C WI dir10 (const 4))
(r13-postinc2dir dmovr13pih dmovh OP1_1 OP2_D HI dir9  (const 2))
(r13-postinc2dir dmovr13pib dmovb OP1_1 OP2_E QI dir8  (const 1))
 
(dni dmovr15pi
     "dmov @R15+,@dir10"
     (NOT-IN-DELAY-SLOT)
     "dmov @$R15+,@$dir10"
     (+ OP1_1 OP2_B dir10)
     (sequence ()
               (set (mem WI dir10) (mem WI (reg h-gr 15)))
               (set (reg h-gr 15) (add (reg h-gr 15) (const 4))))
     ((fr30-1 (unit u-load) (unit u-store)))
)
; End of reordered insns.
 
(dir2r13 dmov2r13  dmov  OP1_0 OP2_8 WI dir10)
(dir2r13 dmov2r13h dmovh OP1_0 OP2_9 HI dir9)
(dir2r13 dmov2r13b dmovb OP1_0 OP2_A QI dir8)
 
(dir2r13-postinc dmov2r13pi  dmov  OP1_0 OP2_C WI dir10 (const 4))
(dir2r13-postinc dmov2r13pih dmovh OP1_0 OP2_D HI dir9  (const 2))
(dir2r13-postinc dmov2r13pib dmovb OP1_0 OP2_E QI dir8  (const 1))
 
(dni dmov2r15pd
     "dmov @dir10,@-R15"
     (NOT-IN-DELAY-SLOT)
     "dmov @$dir10,@-$R15"
     (+ OP1_0 OP2_B dir10)
     (sequence ()
               (set (reg h-gr 15) (sub (reg h-gr 15) (const 4)))
               (set (mem WI (reg h-gr 15)) (mem WI dir10)))
     ((fr30-1 (unit u-load) (unit u-store)))
)
 
; Leave these insns as stubs for now, except for the increment of $Ri
;
(dni ldres
     "ldres @Ri+,#u4"
     ()
     "ldres @$Ri+,$u4"
     (+ OP1_B OP2_C u4 Ri)
     (set Ri (add Ri (const 4)))
     ()
)
 
(dni stres
     "stres #u4,@Ri+"
     ()
     "stres $u4,@$Ri+"
     (+ OP1_B OP2_D u4 Ri)
     (set Ri (add Ri (const 4)))
     ()
)
 
; Leave the coprocessor insns as stubs for now.
;
(define-pmacro (cop-stub name insn opc1 opc2 opc3 arg1 arg2)
  (dni name
       (.str insn " u4c,ccc,CRj," arg1 "," arg2)
       (NOT-IN-DELAY-SLOT)
       (.str insn " $u4c,$ccc,$" arg1 ",$" arg2)
       (+ opc1 opc2 opc3 u4c ccc arg1 arg2)
       (nop) ; STUB
       ()
  )
)
 
(cop-stub copop copop OP1_9 OP2_F OP3_C CRj CRi)
(cop-stub copld copld OP1_9 OP2_F OP3_D Rjc CRi)
(cop-stub copst copst OP1_9 OP2_F OP3_E CRj Ric)
(cop-stub copsv copsv OP1_9 OP2_F OP3_F CRj Ric)
 
(dni nop
     "nop"
     ()
     "nop"
     (+ OP1_9 OP2_F OP3_A OP4_0)
     (nop)
     ()
)
 
(dni andccr
     "andccr #u8"
     ()
     "andccr $u8"
     (+ OP1_8 OP2_3 u8)
     (set ccr (and ccr u8))
     ()
)
 
(dni orccr
     "orccr #u8"
     ()
     "orccr $u8"
     (+ OP1_9 OP2_3 u8)
     (set ccr (or ccr u8))
     ()
)
 
(dni stilm
     "stilm #u8"
     ()
     "stilm $u8"
     (+ OP1_8 OP2_7 u8)
     (set ilm (and u8 (const #x1f)))
     ()
)
 
(dni addsp
     "addsp #s10"
     ()
     "addsp $s10"
     (+ OP1_A OP2_3 s10)
     (set (reg h-gr 15) (add (reg h-gr 15) s10))
     ()
)
 
(define-pmacro (ext-op name opc1 opc2 opc3 op mode mask)
  (dni name
       (.str name " Ri")
       ()
       (.str name " $Ri")
       (+ opc1 opc2 opc3 Ri)
       (set Ri (op WI (and mode Ri mask)))
       ()
  )
)
 
(ext-op extsb OP1_9 OP2_7 OP3_8 ext  QI  (const #xff))
(ext-op extub OP1_9 OP2_7 OP3_9 zext UQI (const #xff))
(ext-op extsh OP1_9 OP2_7 OP3_A ext  HI  (const #xffff))
(ext-op extuh OP1_9 OP2_7 OP3_B zext UHI (const #xffff))
 
(dni ldm0
     "ldm0 (reglist_low_ld)"
     (NOT-IN-DELAY-SLOT)
     "ldm0 ($reglist_low_ld)"
     (+ OP1_8 OP2_C reglist_low_ld)
     (sequence ()
               (if (and reglist_low_ld (const #x1))
                   (sequence ()
                             (set (reg h-gr 0) (mem WI (reg h-gr 15)))
                             (set (reg h-gr 15) (add (reg h-gr 15) (const 4)))))
               (if (and reglist_low_ld (const #x2))
                   (sequence ()
                             (set (reg h-gr 1) (mem WI (reg h-gr 15)))
                             (set (reg h-gr 15) (add (reg h-gr 15) (const 4)))))
               (if (and reglist_low_ld (const #x4))
                   (sequence ()
                             (set (reg h-gr 2) (mem WI (reg h-gr 15)))
                             (set (reg h-gr 15) (add (reg h-gr 15) (const 4)))))
               (if (and reglist_low_ld (const #x8))
                   (sequence ()
                             (set (reg h-gr 3) (mem WI (reg h-gr 15)))
                             (set (reg h-gr 15) (add (reg h-gr 15) (const 4)))))
               (if (and reglist_low_ld (const #x10))
                   (sequence ()
                             (set (reg h-gr 4) (mem WI (reg h-gr 15)))
                             (set (reg h-gr 15) (add (reg h-gr 15) (const 4)))))
               (if (and reglist_low_ld (const #x20))
                   (sequence ()
                             (set (reg h-gr 5) (mem WI (reg h-gr 15)))
                             (set (reg h-gr 15) (add (reg h-gr 15) (const 4)))))
               (if (and reglist_low_ld (const #x40))
                   (sequence ()
                             (set (reg h-gr 6) (mem WI (reg h-gr 15)))
                             (set (reg h-gr 15) (add (reg h-gr 15) (const 4)))))
               (if (and reglist_low_ld (const #x80))
                   (sequence ()
                             (set (reg h-gr 7) (mem WI (reg h-gr 15)))
                             (set (reg h-gr 15) (add (reg h-gr 15) (const 4)))))
     )
     ((fr30-1 (unit u-ldm)))
)
 
(dni ldm1
     "ldm1 (reglist_hi_ld)"
     (NOT-IN-DELAY-SLOT)
     "ldm1 ($reglist_hi_ld)"
     (+ OP1_8 OP2_D reglist_hi_ld)
     (sequence ()
               (if (and reglist_hi_ld (const #x1))
                   (sequence ()
                             (set (reg h-gr 8) (mem WI (reg h-gr 15)))
                             (set (reg h-gr 15) (add (reg h-gr 15) (const 4)))))
               (if (and reglist_hi_ld (const #x2))
                   (sequence ()
                             (set (reg h-gr 9) (mem WI (reg h-gr 15)))
                             (set (reg h-gr 15) (add (reg h-gr 15) (const 4)))))
               (if (and reglist_hi_ld (const #x4))
                   (sequence ()
                             (set (reg h-gr 10) (mem WI (reg h-gr 15)))
                             (set (reg h-gr 15) (add (reg h-gr 15) (const 4)))))
               (if (and reglist_hi_ld (const #x8))
                   (sequence ()
                             (set (reg h-gr 11) (mem WI (reg h-gr 15)))
                             (set (reg h-gr 15) (add (reg h-gr 15) (const 4)))))
               (if (and reglist_hi_ld (const #x10))
                   (sequence ()
                             (set (reg h-gr 12) (mem WI (reg h-gr 15)))
                             (set (reg h-gr 15) (add (reg h-gr 15) (const 4)))))
               (if (and reglist_hi_ld (const #x20))
                   (sequence ()
                             (set (reg h-gr 13) (mem WI (reg h-gr 15)))
                             (set (reg h-gr 15) (add (reg h-gr 15) (const 4)))))
               (if (and reglist_hi_ld (const #x40))
                   (sequence ()
                             (set (reg h-gr 14) (mem WI (reg h-gr 15)))
                             (set (reg h-gr 15) (add (reg h-gr 15) (const 4)))))
               (if (and reglist_hi_ld (const #x80))
                   (set (reg h-gr 15) (mem WI (reg h-gr 15))))
     )
     ((fr30-1 (unit u-ldm)))
)
 
(dni stm0
     "stm0 (reglist_low_st)"
     (NOT-IN-DELAY-SLOT)
     "stm0 ($reglist_low_st)"
     (+ OP1_8 OP2_E reglist_low_st)
     (sequence ()
               (if (and reglist_low_st (const #x1))
                   (sequence ()
                             (set (reg h-gr 15) (sub (reg h-gr 15) (const 4)))
                             (set (mem WI (reg h-gr 15)) (reg h-gr 7))))
               (if (and reglist_low_st (const #x2))
                   (sequence ()
                             (set (reg h-gr 15) (sub (reg h-gr 15) (const 4)))
                             (set (mem WI (reg h-gr 15)) (reg h-gr 6))))
               (if (and reglist_low_st (const #x4))
                   (sequence ()
                             (set (reg h-gr 15) (sub (reg h-gr 15) (const 4)))
                             (set (mem WI (reg h-gr 15)) (reg h-gr 5))))
               (if (and reglist_low_st (const #x8))
                   (sequence ()
                             (set (reg h-gr 15) (sub (reg h-gr 15) (const 4)))
                             (set (mem WI (reg h-gr 15)) (reg h-gr 4))))
               (if (and reglist_low_st (const #x10))
                   (sequence ()
                             (set (reg h-gr 15) (sub (reg h-gr 15) (const 4)))
                             (set (mem WI (reg h-gr 15)) (reg h-gr 3))))
               (if (and reglist_low_st (const #x20))
                   (sequence ()
                             (set (reg h-gr 15) (sub (reg h-gr 15) (const 4)))
                             (set (mem WI (reg h-gr 15)) (reg h-gr 2))))
               (if (and reglist_low_st (const #x40))
                   (sequence ()
                             (set (reg h-gr 15) (sub (reg h-gr 15) (const 4)))
                             (set (mem WI (reg h-gr 15)) (reg h-gr 1))))
               (if (and reglist_low_st (const #x80))
                   (sequence ()
                             (set (reg h-gr 15) (sub (reg h-gr 15) (const 4)))
                             (set (mem WI (reg h-gr 15)) (reg h-gr 0))))
     )
     ((fr30-1 (unit u-stm)))
)
 
(dni stm1
     "stm1 (reglist_hi_st)"
     (NOT-IN-DELAY-SLOT)
     "stm1 ($reglist_hi_st)"
     (+ OP1_8 OP2_F reglist_hi_st)
     (sequence ()
               (if (and reglist_hi_st (const #x1))
                   (sequence ((WI save-r15))
                             (set save-r15 (reg h-gr 15))
                             (set (reg h-gr 15) (sub (reg h-gr 15) (const 4)))
                             (set (mem WI (reg h-gr 15)) save-r15)))
               (if (and reglist_hi_st (const #x2))
                   (sequence ()
                             (set (reg h-gr 15) (sub (reg h-gr 15) (const 4)))
                             (set (mem WI (reg h-gr 15)) (reg h-gr 14))))
               (if (and reglist_hi_st (const #x4))
                   (sequence ()
                             (set (reg h-gr 15) (sub (reg h-gr 15) (const 4)))
                             (set (mem WI (reg h-gr 15)) (reg h-gr 13))))
               (if (and reglist_hi_st (const #x8))
                   (sequence ()
                             (set (reg h-gr 15) (sub (reg h-gr 15) (const 4)))
                             (set (mem WI (reg h-gr 15)) (reg h-gr 12))))
               (if (and reglist_hi_st (const #x10))
                   (sequence ()
                             (set (reg h-gr 15) (sub (reg h-gr 15) (const 4)))
                             (set (mem WI (reg h-gr 15)) (reg h-gr 11))))
               (if (and reglist_hi_st (const #x20))
                   (sequence ()
                             (set (reg h-gr 15) (sub (reg h-gr 15) (const 4)))
                             (set (mem WI (reg h-gr 15)) (reg h-gr 10))))
               (if (and reglist_hi_st (const #x40))
                   (sequence ()
                             (set (reg h-gr 15) (sub (reg h-gr 15) (const 4)))
                             (set (mem WI (reg h-gr 15)) (reg h-gr 9))))
               (if (and reglist_hi_st (const #x80))
                   (sequence ()
                             (set (reg h-gr 15) (sub (reg h-gr 15) (const 4)))
                             (set (mem WI (reg h-gr 15)) (reg h-gr 8))))
     )
     ((fr30-1 (unit u-stm)))
)
 
(dni enter
     "enter #u10"
     (NOT-IN-DELAY-SLOT)
     "enter $u10"
     (+ OP1_0 OP2_F u10)
     (sequence ((WI tmp))
               (set tmp (sub (reg h-gr 15) (const 4)))
               (set (mem WI tmp) (reg h-gr 14))
               (set (reg h-gr 14) tmp)
               (set (reg h-gr 15) (sub (reg h-gr 15) u10)))
     ((fr30-1 (unit u-exec (cycles 2))))
)
 
(dni leave
     "leave"
     ()
     "leave"
     (+ OP1_9 OP2_F OP3_9 OP4_0)
     (sequence ()
               (set (reg h-gr 15) (add (reg h-gr 14) (const 4)))
               (set (reg h-gr 14) (mem WI (sub (reg h-gr 15) (const 4)))))
     ()
)
 
(dni xchb
     "xchb @Rj,Ri"
     (NOT-IN-DELAY-SLOT)
     "xchb @$Rj,$Ri"
     (+ OP1_8 OP2_A Rj Ri)
     (sequence ((WI tmp))
               (set tmp Ri)
               (set Ri (mem UQI Rj))
               (set (mem UQI Rj) tmp))
     ((fr30-1 (unit u-load) (unit u-store)))
)
Browse

Tools

Subversion Repositories open8_urisc

[/] [open8_urisc/] [trunk/] [gnu/] [binutils/] [cpu/] [fr30.cpu] - Blame information for rev 161

Line No.	Rev	Author	Line
1	161	khays	`; Fujitsu FR30 CPU description. -- Scheme --`
2			`; Copyright 2011 Free Software Foundation, Inc.`
3			`;`
4			`; Contributed by Red Hat Inc;`
5			`;`
6			`; This file is part of the GNU Binutils.`
7			`;`
8			`; This program is free software; you can redistribute it and/or modify`
9			`; it under the terms of the GNU General Public License as published by`
10			`; the Free Software Foundation; either version 3 of the License, or`
11			`; (at your option) any later version.`
12			`;`
13			`; This program is distributed in the hope that it will be useful,`
14			`; but WITHOUT ANY WARRANTY; without even the implied warranty of`
15			`; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
16			`; GNU General Public License for more details.`
17			`;`
18			`; You should have received a copy of the GNU General Public License`
19			`; along with this program; if not, write to the Free Software`
20			`; Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,`
21			`; MA 02110-1301, USA.`
22
23			`(define-rtl-version 0 8)`
24
25			`(include "simplify.inc")`
26
27			`; define-arch must appear first`
28
29			`(define-arch`
30			`(name fr30) ; name of cpu family`
31			`(comment "Fujitsu FR30")`
32			`(default-alignment forced)`
33			`(insn-lsb0? #f)`
34			`(machs fr30)`
35			`(isas fr30)`
36			`)`
37
38			`(define-isa`
39			`(name fr30)`
40			`(base-insn-bitsize 16)`