Subversion Repositories open8_urisc

/* tc-mips.c -- assemble code for a MIPS chip.

   Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,

   2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011

   Free Software Foundation, Inc.

   Contributed by the OSF and Ralph Campbell.

   Written by Keith Knowles and Ralph Campbell, working independently.

   Modified for ECOFF and R4000 support by Ian Lance Taylor of Cygnus

   Support.

   This file is part of GAS.

   GAS is free software; you can redistribute it and/or modify

   it under the terms of the GNU General Public License as published by

   the Free Software Foundation; either version 3, or (at your option)

   any later version.

   GAS is distributed in the hope that it will be useful,

   but WITHOUT ANY WARRANTY; without even the implied warranty of

   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License

   along with GAS; see the file COPYING.  If not, write to the Free

   Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA

   02110-1301, USA.  */

#include "as.h"

#include "config.h"

#include "subsegs.h"

#include "safe-ctype.h"

#include "opcode/mips.h"

#include "itbl-ops.h"

#include "dwarf2dbg.h"

#include "dw2gencfi.h"

#ifdef DEBUG

#define DBG(x) printf x

#else

#define DBG(x)

#endif

#ifdef OBJ_MAYBE_ELF

/* Clean up namespace so we can include obj-elf.h too.  */

static int mips_output_flavor (void);

static int mips_output_flavor (void) { return OUTPUT_FLAVOR; }

#undef OBJ_PROCESS_STAB

#undef OUTPUT_FLAVOR

#undef S_GET_ALIGN

#undef S_GET_SIZE

#undef S_SET_ALIGN

#undef S_SET_SIZE

#undef obj_frob_file

#undef obj_frob_file_after_relocs

#undef obj_frob_symbol

#undef obj_pop_insert

#undef obj_sec_sym_ok_for_reloc

#undef OBJ_COPY_SYMBOL_ATTRIBUTES

#include "obj-elf.h"

/* Fix any of them that we actually care about.  */

#undef OUTPUT_FLAVOR

#define OUTPUT_FLAVOR mips_output_flavor()

#endif

#if defined (OBJ_ELF)

#include "elf/mips.h"

#endif

#ifndef ECOFF_DEBUGGING

#define NO_ECOFF_DEBUGGING

#define ECOFF_DEBUGGING 0

#endif

int mips_flag_mdebug = -1;

/* Control generation of .pdr sections.  Off by default on IRIX: the native

   linker doesn't know about and discards them, but relocations against them

   remain, leading to rld crashes.  */

#ifdef TE_IRIX

int mips_flag_pdr = FALSE;

#else

int mips_flag_pdr = TRUE;

#endif

#include "ecoff.h"

#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)

static char *mips_regmask_frag;

#endif

#define ZERO 0

#define ATREG 1

#define S0  16

#define S7  23

#define TREG 24

#define PIC_CALL_REG 25

#define KT0 26

#define KT1 27

#define GP  28

#define SP  29

#define FP  30

#define RA  31

#define ILLEGAL_REG (32)

#define AT  mips_opts.at

/* Allow override of standard little-endian ECOFF format.  */

#ifndef ECOFF_LITTLE_FORMAT

#define ECOFF_LITTLE_FORMAT "ecoff-littlemips"

#endif

extern int target_big_endian;

/* The name of the readonly data section.  */

#define RDATA_SECTION_NAME (OUTPUT_FLAVOR == bfd_target_ecoff_flavour \

                            ? ".rdata" \

                            : OUTPUT_FLAVOR == bfd_target_coff_flavour \

                            ? ".rdata" \

                            : OUTPUT_FLAVOR == bfd_target_elf_flavour \

                            ? ".rodata" \

                            : (abort (), ""))

/* Ways in which an instruction can be "appended" to the output.  */

enum append_method {

  /* Just add it normally.  */

  APPEND_ADD,

  /* Add it normally and then add a nop.  */

  APPEND_ADD_WITH_NOP,

  /* Turn an instruction with a delay slot into a "compact" version.  */

  APPEND_ADD_COMPACT,

  /* Insert the instruction before the last one.  */

  APPEND_SWAP

};

/* Information about an instruction, including its format, operands

   and fixups.  */

struct mips_cl_insn

{

  /* The opcode's entry in mips_opcodes or mips16_opcodes.  */

  const struct mips_opcode *insn_mo;

  /* True if this is a mips16 instruction and if we want the extended

     form of INSN_MO.  */

  bfd_boolean use_extend;

  /* The 16-bit extension instruction to use when USE_EXTEND is true.  */

  unsigned short extend;

  /* The 16-bit or 32-bit bitstring of the instruction itself.  This is

     a copy of INSN_MO->match with the operands filled in.  */

  unsigned long insn_opcode;

  /* The frag that contains the instruction.  */

  struct frag *frag;

  /* The offset into FRAG of the first instruction byte.  */

  long where;

  /* The relocs associated with the instruction, if any.  */

  fixS *fixp[3];

  /* True if this entry cannot be moved from its current position.  */

  unsigned int fixed_p : 1;

  /* True if this instruction occurred in a .set noreorder block.  */

  unsigned int noreorder_p : 1;

  /* True for mips16 instructions that jump to an absolute address.  */

  unsigned int mips16_absolute_jump_p : 1;

  /* True if this instruction is complete.  */

  unsigned int complete_p : 1;

};

/* The ABI to use.  */

enum mips_abi_level

{

  NO_ABI = 0,

  O32_ABI,

  O64_ABI,

  N32_ABI,

  N64_ABI,

  EABI_ABI

};

/* MIPS ABI we are using for this output file.  */

static enum mips_abi_level mips_abi = NO_ABI;

/* Whether or not we have code that can call pic code.  */

int mips_abicalls = FALSE;

/* Whether or not we have code which can be put into a shared

   library.  */

static bfd_boolean mips_in_shared = TRUE;

/* This is the set of options which may be modified by the .set

   pseudo-op.  We use a struct so that .set push and .set pop are more

   reliable.  */

struct mips_set_options

{

  /* MIPS ISA (Instruction Set Architecture) level.  This is set to -1

     if it has not been initialized.  Changed by `.set mipsN', and the

     -mipsN command line option, and the default CPU.  */

  int isa;

  /* Enabled Application Specific Extensions (ASEs).  These are set to -1

     if they have not been initialized.  Changed by `.set <asename>', by

     command line options, and based on the default architecture.  */

  int ase_mips3d;

  int ase_mdmx;

  int ase_smartmips;

  int ase_dsp;

  int ase_dspr2;

  int ase_mt;

  int ase_mcu;

  /* Whether we are assembling for the mips16 processor.  0 if we are

     not, 1 if we are, and -1 if the value has not been initialized.

     Changed by `.set mips16' and `.set nomips16', and the -mips16 and

     -nomips16 command line options, and the default CPU.  */

  int mips16;

  /* Whether we are assembling for the mipsMIPS ASE.  0 if we are not,

     1 if we are, and -1 if the value has not been initialized.  Changed

     by `.set micromips' and `.set nomicromips', and the -mmicromips

     and -mno-micromips command line options, and the default CPU.  */

  int micromips;

  /* Non-zero if we should not reorder instructions.  Changed by `.set

     reorder' and `.set noreorder'.  */

  int noreorder;

  /* Non-zero if we should not permit the register designated "assembler

     temporary" to be used in instructions.  The value is the register

     number, normally $at ($1).  Changed by `.set at=REG', `.set noat'

     (same as `.set at=$0') and `.set at' (same as `.set at=$1').  */

  unsigned int at;

  /* Non-zero if we should warn when a macro instruction expands into

     more than one machine instruction.  Changed by `.set nomacro' and

     `.set macro'.  */

  int warn_about_macros;

  /* Non-zero if we should not move instructions.  Changed by `.set

     move', `.set volatile', `.set nomove', and `.set novolatile'.  */

  int nomove;

  /* Non-zero if we should not optimize branches by moving the target

     of the branch into the delay slot.  Actually, we don't perform

     this optimization anyhow.  Changed by `.set bopt' and `.set

     nobopt'.  */

  int nobopt;

  /* Non-zero if we should not autoextend mips16 instructions.

     Changed by `.set autoextend' and `.set noautoextend'.  */

  int noautoextend;

  /* Restrict general purpose registers and floating point registers

     to 32 bit.  This is initially determined when -mgp32 or -mfp32

     is passed but can changed if the assembler code uses .set mipsN.  */

  int gp32;

  int fp32;

  /* MIPS architecture (CPU) type.  Changed by .set arch=FOO, the -march

     command line option, and the default CPU.  */

  int arch;

  /* True if ".set sym32" is in effect.  */

  bfd_boolean sym32;

  /* True if floating-point operations are not allowed.  Changed by .set

     softfloat or .set hardfloat, by command line options -msoft-float or

     -mhard-float.  The default is false.  */

  bfd_boolean soft_float;

  /* True if only single-precision floating-point operations are allowed.

     Changed by .set singlefloat or .set doublefloat, command-line options

     -msingle-float or -mdouble-float.  The default is false.  */

  bfd_boolean single_float;

};

/* This is the struct we use to hold the current set of options.  Note

   that we must set the isa field to ISA_UNKNOWN and the ASE fields to

   -1 to indicate that they have not been initialized.  */

/* True if -mgp32 was passed.  */

static int file_mips_gp32 = -1;

/* True if -mfp32 was passed.  */

static int file_mips_fp32 = -1;

/* 1 if -msoft-float, 0 if -mhard-float.  The default is 0.  */

static int file_mips_soft_float = 0;

/* 1 if -msingle-float, 0 if -mdouble-float.  The default is 0.   */

static int file_mips_single_float = 0;

static struct mips_set_options mips_opts =

{

  /* isa */ ISA_UNKNOWN, /* ase_mips3d */ -1, /* ase_mdmx */ -1,

  /* ase_smartmips */ 0, /* ase_dsp */ -1, /* ase_dspr2 */ -1, /* ase_mt */ -1,

  /* ase_mcu */ -1, /* mips16 */ -1, /* micromips */ -1, /* noreorder */ 0,

  /* at */ ATREG, /* warn_about_macros */ 0, /* nomove */ 0, /* nobopt */ 0,

  /* noautoextend */ 0, /* gp32 */ 0, /* fp32 */ 0, /* arch */ CPU_UNKNOWN,

  /* sym32 */ FALSE, /* soft_float */ FALSE, /* single_float */ FALSE

};

/* These variables are filled in with the masks of registers used.

   The object format code reads them and puts them in the appropriate

   place.  */

unsigned long mips_gprmask;

unsigned long mips_cprmask[4];

/* MIPS ISA we are using for this output file.  */

static int file_mips_isa = ISA_UNKNOWN;

/* True if any MIPS16 code was produced.  */

static int file_ase_mips16;

#define ISA_SUPPORTS_MIPS16E (mips_opts.isa == ISA_MIPS32               \

                              || mips_opts.isa == ISA_MIPS32R2          \

                              || mips_opts.isa == ISA_MIPS64            \

                              || mips_opts.isa == ISA_MIPS64R2)

/* True if any microMIPS code was produced.  */

static int file_ase_micromips;

/* True if we want to create R_MIPS_JALR for jalr $25.  */

#ifdef TE_IRIX

#define MIPS_JALR_HINT_P(EXPR) HAVE_NEWABI

#else

/* As a GNU extension, we use R_MIPS_JALR for o32 too.  However,

   because there's no place for any addend, the only acceptable

   expression is a bare symbol.  */

#define MIPS_JALR_HINT_P(EXPR) \

  (!HAVE_IN_PLACE_ADDENDS \

   || ((EXPR)->X_op == O_symbol && (EXPR)->X_add_number == 0))

#endif

/* True if -mips3d was passed or implied by arguments passed on the

   command line (e.g., by -march).  */

static int file_ase_mips3d;

/* True if -mdmx was passed or implied by arguments passed on the

   command line (e.g., by -march).  */

static int file_ase_mdmx;

/* True if -msmartmips was passed or implied by arguments passed on the

   command line (e.g., by -march).  */

static int file_ase_smartmips;

#define ISA_SUPPORTS_SMARTMIPS (mips_opts.isa == ISA_MIPS32             \

                                || mips_opts.isa == ISA_MIPS32R2)

/* True if -mdsp was passed or implied by arguments passed on the

   command line (e.g., by -march).  */

static int file_ase_dsp;

#define ISA_SUPPORTS_DSP_ASE (mips_opts.isa == ISA_MIPS32R2             \

                              || mips_opts.isa == ISA_MIPS64R2)

#define ISA_SUPPORTS_DSP64_ASE (mips_opts.isa == ISA_MIPS64R2)

/* True if -mdspr2 was passed or implied by arguments passed on the

   command line (e.g., by -march).  */

static int file_ase_dspr2;

#define ISA_SUPPORTS_DSPR2_ASE (mips_opts.isa == ISA_MIPS32R2           \

                                || mips_opts.isa == ISA_MIPS64R2)

/* True if -mmt was passed or implied by arguments passed on the

   command line (e.g., by -march).  */

static int file_ase_mt;

#define ISA_SUPPORTS_MT_ASE (mips_opts.isa == ISA_MIPS32R2              \

                             || mips_opts.isa == ISA_MIPS64R2)

#define ISA_SUPPORTS_MCU_ASE (mips_opts.isa == ISA_MIPS32R2             \

                              || mips_opts.isa == ISA_MIPS64R2          \

                              || mips_opts.micromips)

/* The argument of the -march= flag.  The architecture we are assembling.  */

static int file_mips_arch = CPU_UNKNOWN;

static const char *mips_arch_string;

/* The argument of the -mtune= flag.  The architecture for which we

   are optimizing.  */

static int mips_tune = CPU_UNKNOWN;

static const char *mips_tune_string;

/* True when generating 32-bit code for a 64-bit processor.  */

static int mips_32bitmode = 0;

/* True if the given ABI requires 32-bit registers.  */

#define ABI_NEEDS_32BIT_REGS(ABI) ((ABI) == O32_ABI)

/* Likewise 64-bit registers.  */

#define ABI_NEEDS_64BIT_REGS(ABI)       \

  ((ABI) == N32_ABI                     \

   || (ABI) == N64_ABI                  \

   || (ABI) == O64_ABI)

/*  Return true if ISA supports 64 bit wide gp registers.  */

#define ISA_HAS_64BIT_REGS(ISA)         \

  ((ISA) == ISA_MIPS3                   \

   || (ISA) == ISA_MIPS4                \

   || (ISA) == ISA_MIPS5                \

   || (ISA) == ISA_MIPS64               \

   || (ISA) == ISA_MIPS64R2)

/*  Return true if ISA supports 64 bit wide float registers.  */

#define ISA_HAS_64BIT_FPRS(ISA)         \

  ((ISA) == ISA_MIPS3                   \

   || (ISA) == ISA_MIPS4                \

   || (ISA) == ISA_MIPS5                \

   || (ISA) == ISA_MIPS32R2             \

   || (ISA) == ISA_MIPS64               \

   || (ISA) == ISA_MIPS64R2)

/* Return true if ISA supports 64-bit right rotate (dror et al.)

   instructions.  */

#define ISA_HAS_DROR(ISA)               \

  ((ISA) == ISA_MIPS64R2                \

   || (mips_opts.micromips              \

       && ISA_HAS_64BIT_REGS (ISA))     \

   )

/* Return true if ISA supports 32-bit right rotate (ror et al.)

   instructions.  */

#define ISA_HAS_ROR(ISA)                \

  ((ISA) == ISA_MIPS32R2                \

   || (ISA) == ISA_MIPS64R2             \

   || mips_opts.ase_smartmips           \

   || mips_opts.micromips               \

   )

/* Return true if ISA supports single-precision floats in odd registers.  */

#define ISA_HAS_ODD_SINGLE_FPR(ISA)     \

  ((ISA) == ISA_MIPS32                  \

   || (ISA) == ISA_MIPS32R2             \

   || (ISA) == ISA_MIPS64               \

   || (ISA) == ISA_MIPS64R2)

/* Return true if ISA supports move to/from high part of a 64-bit

   floating-point register. */

#define ISA_HAS_MXHC1(ISA)              \

  ((ISA) == ISA_MIPS32R2                \

   || (ISA) == ISA_MIPS64R2)

#define HAVE_32BIT_GPRS                            \

    (mips_opts.gp32 || !ISA_HAS_64BIT_REGS (mips_opts.isa))

#define HAVE_32BIT_FPRS                            \

    (mips_opts.fp32 || !ISA_HAS_64BIT_FPRS (mips_opts.isa))

#define HAVE_64BIT_GPRS (!HAVE_32BIT_GPRS)

#define HAVE_64BIT_FPRS (!HAVE_32BIT_FPRS)

#define HAVE_NEWABI (mips_abi == N32_ABI || mips_abi == N64_ABI)

#define HAVE_64BIT_OBJECTS (mips_abi == N64_ABI)

/* True if relocations are stored in-place.  */

#define HAVE_IN_PLACE_ADDENDS (!HAVE_NEWABI)

/* The ABI-derived address size.  */

#define HAVE_64BIT_ADDRESSES \

  (HAVE_64BIT_GPRS && (mips_abi == EABI_ABI || mips_abi == N64_ABI))

#define HAVE_32BIT_ADDRESSES (!HAVE_64BIT_ADDRESSES)

/* The size of symbolic constants (i.e., expressions of the form

   "SYMBOL" or "SYMBOL + OFFSET").  */

#define HAVE_32BIT_SYMBOLS \

  (HAVE_32BIT_ADDRESSES || !HAVE_64BIT_OBJECTS || mips_opts.sym32)

#define HAVE_64BIT_SYMBOLS (!HAVE_32BIT_SYMBOLS)

/* Addresses are loaded in different ways, depending on the address size

   in use.  The n32 ABI Documentation also mandates the use of additions

   with overflow checking, but existing implementations don't follow it.  */

#define ADDRESS_ADD_INSN                                                \

   (HAVE_32BIT_ADDRESSES ? "addu" : "daddu")

#define ADDRESS_ADDI_INSN                                               \

   (HAVE_32BIT_ADDRESSES ? "addiu" : "daddiu")

#define ADDRESS_LOAD_INSN                                               \

   (HAVE_32BIT_ADDRESSES ? "lw" : "ld")

#define ADDRESS_STORE_INSN                                              \

   (HAVE_32BIT_ADDRESSES ? "sw" : "sd")

/* Return true if the given CPU supports the MIPS16 ASE.  */

#define CPU_HAS_MIPS16(cpu)                                             \

   (strncmp (TARGET_CPU, "mips16", sizeof ("mips16") - 1) == 0           \

    || strncmp (TARGET_CANONICAL, "mips-lsi-elf", sizeof ("mips-lsi-elf") - 1) == 0)

/* Return true if the given CPU supports the microMIPS ASE.  */

#define CPU_HAS_MICROMIPS(cpu)  0

/* True if CPU has a dror instruction.  */

#define CPU_HAS_DROR(CPU)       ((CPU) == CPU_VR5400 || (CPU) == CPU_VR5500)

/* True if CPU has a ror instruction.  */

#define CPU_HAS_ROR(CPU)        CPU_HAS_DROR (CPU)

/* True if CPU is in the Octeon family */

#define CPU_IS_OCTEON(CPU) ((CPU) == CPU_OCTEON || (CPU) == CPU_OCTEONP || (CPU) == CPU_OCTEON2)

/* True if CPU has seq/sne and seqi/snei instructions.  */

#define CPU_HAS_SEQ(CPU)        (CPU_IS_OCTEON (CPU))

/* True if CPU does not implement the all the coprocessor insns.  For these

   CPUs only those COP insns are accepted that are explicitly marked to be

   available on the CPU.  ISA membership for COP insns is ignored.  */

#define NO_ISA_COP(CPU)         (CPU_IS_OCTEON (CPU))

/* True if mflo and mfhi can be immediately followed by instructions

   which write to the HI and LO registers.

   According to MIPS specifications, MIPS ISAs I, II, and III need

   (at least) two instructions between the reads of HI/LO and

   instructions which write them, and later ISAs do not.  Contradicting

   the MIPS specifications, some MIPS IV processor user manuals (e.g.

   the UM for the NEC Vr5000) document needing the instructions between

   HI/LO reads and writes, as well.  Therefore, we declare only MIPS32,

   MIPS64 and later ISAs to have the interlocks, plus any specific

   earlier-ISA CPUs for which CPU documentation declares that the

   instructions are really interlocked.  */

#define hilo_interlocks \

  (mips_opts.isa == ISA_MIPS32                        \

   || mips_opts.isa == ISA_MIPS32R2                   \

   || mips_opts.isa == ISA_MIPS64                     \

   || mips_opts.isa == ISA_MIPS64R2                   \

   || mips_opts.arch == CPU_R4010                     \

   || mips_opts.arch == CPU_R10000                    \

   || mips_opts.arch == CPU_R12000                    \

   || mips_opts.arch == CPU_R14000                    \

   || mips_opts.arch == CPU_R16000                    \

   || mips_opts.arch == CPU_RM7000                    \

   || mips_opts.arch == CPU_VR5500                    \

   || mips_opts.micromips                             \

   )

/* Whether the processor uses hardware interlocks to protect reads

   from the GPRs after they are loaded from memory, and thus does not

   require nops to be inserted.  This applies to instructions marked

   INSN_LOAD_MEMORY_DELAY.  These nops are only required at MIPS ISA

   level I and microMIPS mode instructions are always interlocked.  */

#define gpr_interlocks                                \

  (mips_opts.isa != ISA_MIPS1                         \

   || mips_opts.arch == CPU_R3900                     \

   || mips_opts.micromips                             \

   )

/* Whether the processor uses hardware interlocks to avoid delays

   required by coprocessor instructions, and thus does not require

   nops to be inserted.  This applies to instructions marked

   INSN_LOAD_COPROC_DELAY, INSN_COPROC_MOVE_DELAY, and to delays

   between instructions marked INSN_WRITE_COND_CODE and ones marked

   INSN_READ_COND_CODE.  These nops are only required at MIPS ISA

   levels I, II, and III and microMIPS mode instructions are always

   interlocked.  */

/* Itbl support may require additional care here.  */

#define cop_interlocks                                \

  ((mips_opts.isa != ISA_MIPS1                        \

    && mips_opts.isa != ISA_MIPS2                     \

    && mips_opts.isa != ISA_MIPS3)                    \

   || mips_opts.arch == CPU_R4300                     \

   || mips_opts.micromips                             \

   )

/* Whether the processor uses hardware interlocks to protect reads

   from coprocessor registers after they are loaded from memory, and

   thus does not require nops to be inserted.  This applies to

   instructions marked INSN_COPROC_MEMORY_DELAY.  These nops are only

   requires at MIPS ISA level I and microMIPS mode instructions are

   always interlocked.  */

#define cop_mem_interlocks                            \

  (mips_opts.isa != ISA_MIPS1                         \

   || mips_opts.micromips                             \

   )

/* Is this a mfhi or mflo instruction?  */

#define MF_HILO_INSN(PINFO) \

  ((PINFO & INSN_READ_HI) || (PINFO & INSN_READ_LO))

/* Returns true for a (non floating-point) coprocessor instruction.  Reading

   or writing the condition code is only possible on the coprocessors and

   these insns are not marked with INSN_COP.  Thus for these insns use the

   condition-code flags.  */

#define COP_INSN(PINFO)                                                 \

  (PINFO != INSN_MACRO                                                  \

   && ((PINFO) & (FP_S | FP_D)) == 0                                     \

   && ((PINFO) & (INSN_COP | INSN_READ_COND_CODE | INSN_WRITE_COND_CODE)))

/* Whether code compression (either of the MIPS16 or the microMIPS ASEs)

   has been selected.  This implies, in particular, that addresses of text

   labels have their LSB set.  */

#define HAVE_CODE_COMPRESSION                                           \

  ((mips_opts.mips16 | mips_opts.micromips) != 0)

/* MIPS PIC level.  */

enum mips_pic_level mips_pic;

/* 1 if we should generate 32 bit offsets from the $gp register in

   SVR4_PIC mode.  Currently has no meaning in other modes.  */

static int mips_big_got = 0;

/* 1 if trap instructions should used for overflow rather than break

   instructions.  */

static int mips_trap = 0;

/* 1 if double width floating point constants should not be constructed

   by assembling two single width halves into two single width floating

   point registers which just happen to alias the double width destination

   register.  On some architectures this aliasing can be disabled by a bit

   in the status register, and the setting of this bit cannot be determined

   automatically at assemble time.  */

static int mips_disable_float_construction;

/* Non-zero if any .set noreorder directives were used.  */

static int mips_any_noreorder;

/* Non-zero if nops should be inserted when the register referenced in

   an mfhi/mflo instruction is read in the next two instructions.  */

static int mips_7000_hilo_fix;

/* The size of objects in the small data section.  */

static unsigned int g_switch_value = 8;

/* Whether the -G option was used.  */

static int g_switch_seen = 0;

#define N_RMASK 0xc4

#define N_VFP   0xd4

/* If we can determine in advance that GP optimization won't be

   possible, we can skip the relaxation stuff that tries to produce

   GP-relative references.  This makes delay slot optimization work

   better.

   This function can only provide a guess, but it seems to work for

   gcc output.  It needs to guess right for gcc, otherwise gcc

   will put what it thinks is a GP-relative instruction in a branch

   delay slot.

   I don't know if a fix is needed for the SVR4_PIC mode.  I've only

   fixed it for the non-PIC mode.  KR 95/04/07  */

static int nopic_need_relax (symbolS *, int);

/* handle of the OPCODE hash table */

static struct hash_control *op_hash = NULL;

/* The opcode hash table we use for the mips16.  */

static struct hash_control *mips16_op_hash = NULL;

/* The opcode hash table we use for the microMIPS ASE.  */

static struct hash_control *micromips_op_hash = NULL;

/* This array holds the chars that always start a comment.  If the

    pre-processor is disabled, these aren't very useful */

const char comment_chars[] = "#";

/* This array holds the chars that only start a comment at the beginning of

   a line.  If the line seems to have the form '# 123 filename'

   .line and .file directives will appear in the pre-processed output */

/* Note that input_file.c hand checks for '#' at the beginning of the

   first line of the input file.  This is because the compiler outputs

   #NO_APP at the beginning of its output.  */

/* Also note that C style comments are always supported.  */

const char line_comment_chars[] = "#";

/* This array holds machine specific line separator characters.  */

const char line_separator_chars[] = ";";

/* Chars that can be used to separate mant from exp in floating point nums */

const char EXP_CHARS[] = "eE";

/* Chars that mean this number is a floating point constant */

/* As in 0f12.456 */

/* or    0d1.2345e12 */

const char FLT_CHARS[] = "rRsSfFdDxXpP";

/* Also be aware that MAXIMUM_NUMBER_OF_CHARS_FOR_FLOAT may have to be

   changed in read.c .  Ideally it shouldn't have to know about it at all,

   but nothing is ideal around here.

 */

static char *insn_error;

static int auto_align = 1;

/* When outputting SVR4 PIC code, the assembler needs to know the

   offset in the stack frame from which to restore the $gp register.

   This is set by the .cprestore pseudo-op, and saved in this

   variable.  */

static offsetT mips_cprestore_offset = -1;

/* Similar for NewABI PIC code, where $gp is callee-saved.  NewABI has some

   more optimizations, it can use a register value instead of a memory-saved

   offset and even an other register than $gp as global pointer.  */

static offsetT mips_cpreturn_offset = -1;

static int mips_cpreturn_register = -1;

static int mips_gp_register = GP;

static int mips_gprel_offset = 0;

/* Whether mips_cprestore_offset has been set in the current function

   (or whether it has already been warned about, if not).  */

static int mips_cprestore_valid = 0;

/* This is the register which holds the stack frame, as set by the

   .frame pseudo-op.  This is needed to implement .cprestore.  */

static int mips_frame_reg = SP;

/* Whether mips_frame_reg has been set in the current function

   (or whether it has already been warned about, if not).  */

static int mips_frame_reg_valid = 0;

/* To output NOP instructions correctly, we need to keep information

   about the previous two instructions.  */

/* Whether we are optimizing.  The default value of 2 means to remove

   unneeded NOPs and swap branch instructions when possible.  A value

   of 1 means to not swap branches.  A value of 0 means to always

   insert NOPs.  */

static int mips_optimize = 2;

/* Debugging level.  -g sets this to 2.  -gN sets this to N.  -g0 is

   equivalent to seeing no -g option at all.  */

static int mips_debug = 0;

/* The maximum number of NOPs needed to avoid the VR4130 mflo/mfhi errata.  */

#define MAX_VR4130_NOPS 4

/* The maximum number of NOPs needed to fill delay slots.  */

#define MAX_DELAY_NOPS 2

/* The maximum number of NOPs needed for any purpose.  */

#define MAX_NOPS 4

/* A list of previous instructions, with index 0 being the most recent.

   We need to look back MAX_NOPS instructions when filling delay slots

   or working around processor errata.  We need to look back one

   instruction further if we're thinking about using history[0] to

   fill a branch delay slot.  */

static struct mips_cl_insn history[1 + MAX_NOPS];

/* Nop instructions used by emit_nop.  */

static struct mips_cl_insn nop_insn;

static struct mips_cl_insn mips16_nop_insn;

static struct mips_cl_insn micromips_nop16_insn;

static struct mips_cl_insn micromips_nop32_insn;

/* The appropriate nop for the current mode.  */

#define NOP_INSN (mips_opts.mips16 ? &mips16_nop_insn \

                  : (mips_opts.micromips ? &micromips_nop16_insn : &nop_insn))

/* The size of NOP_INSN in bytes.  */

#define NOP_INSN_SIZE (HAVE_CODE_COMPRESSION ? 2 : 4)

/* If this is set, it points to a frag holding nop instructions which

   were inserted before the start of a noreorder section.  If those

   nops turn out to be unnecessary, the size of the frag can be

   decreased.  */

static fragS *prev_nop_frag;

/* The number of nop instructions we created in prev_nop_frag.  */

static int prev_nop_frag_holds;

/* The number of nop instructions that we know we need in

   prev_nop_frag.  */

static int prev_nop_frag_required;

/* The number of instructions we've seen since prev_nop_frag.  */

static int prev_nop_frag_since;

/* For ECOFF and ELF, relocations against symbols are done in two