Subversion Repositories open8_urisc

/* This file is tc-sh64.h

   Copyright 2000, 2001, 2002, 2003, 2005, 2007, 2008

   Free Software Foundation, Inc.

   This file is part of GAS, the GNU Assembler.

   GAS is free software; you can redistribute it and/or modify

   it under the terms of the GNU General Public License as published by

   the Free Software Foundation; either version 3, or (at your option)

   any later version.

   GAS is distributed in the hope that it will be useful,

   but WITHOUT ANY WARRANTY; without even the implied warranty of

   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License

   along with GAS; see the file COPYING.  If not, write to

   the Free Software Foundation, 51 Franklin Street - Fifth Floor,

   Boston, MA 02110-1301, USA.  */

#define TC_SH64

#include "config/tc-sh.h"

#include "elf/sh.h"

#include "elf32-sh64.h"

/* We need to override the tc-sh.h settings of HANDLE_ALIGN and

   MAX_MEM_FOR_RS_ALIGN_CODE; we might need to put in SHmedia NOP:s, not

   SHcompact NOP:s.  */

#undef  HANDLE_ALIGN

#define HANDLE_ALIGN(frag) sh64_handle_align (frag)

extern void sh64_handle_align (fragS *);

#undef  MAX_MEM_FOR_RS_ALIGN_CODE

#define MAX_MEM_FOR_RS_ALIGN_CODE sh64_max_mem_for_rs_align_code ()

extern int sh64_max_mem_for_rs_align_code (void);

#undef  LISTING_HEADER

#define LISTING_HEADER                                  \

  (target_big_endian ?                                  \

     "SuperH SHcompact/SHmedia Big Endian GAS"          \

   : "SuperH SHcompact/SHmedia Little Endian GAS")

/* We need to record the new frag position after an .align.  */

extern void sh64_do_align (int, const char *, int, int);

#define md_do_align(n, fill, len, max, l) \

 do { sh64_do_align (n, fill, len, max); goto l; } while (0)

struct sh64_segment_info_type

{

  /* The type of the section is initialized when the range_start_symbol

     member is non-NULL.  */

  symbolS *mode_start_symbol;

  subsegT mode_start_subseg;

  /* A stored symbol indicating location of last call of

     "md_flush_pending_output".  It is NULLed when we actually use it;

     otherwise the contents is just filled in with segment, frag and

     offset within frag.  */

  symbolS *last_contents_mark;

  unsigned int emitted_ranges;

  enum sh64_elf_cr_type contents_type;

  /* This is used by the SH1-4 parts; we set it to 0 for SHmedia code and

     data.  */

  unsigned int in_code : 1;

};

#undef  TC_SEGMENT_INFO_TYPE

#define TC_SEGMENT_INFO_TYPE struct sh64_segment_info_type

#undef  TARGET_FORMAT

#define TARGET_FORMAT sh64_target_format ()

extern const char *sh64_target_format (void);

#define TARGET_MACH sh64_target_mach ()

extern int sh64_target_mach (void);

#undef TC_FORCE_RELOCATION_LOCAL

#define TC_FORCE_RELOCATION_LOCAL(FIX)                  \

  (!(FIX)->fx_pcrel                                     \

   || (FIX)->fx_r_type == BFD_RELOC_32_PLT_PCREL        \

   || (FIX)->fx_r_type == BFD_RELOC_SH_PLT_LOW16        \

   || (FIX)->fx_r_type == BFD_RELOC_SH_PLT_MEDLOW16     \

   || (FIX)->fx_r_type == BFD_RELOC_SH_PLT_MEDHI16      \

   || (FIX)->fx_r_type == BFD_RELOC_SH_PLT_HI16         \

   || (FIX)->fx_r_type == BFD_RELOC_32_GOT_PCREL        \

   || (FIX)->fx_r_type == BFD_RELOC_SH_GOT_LOW16        \

   || (FIX)->fx_r_type == BFD_RELOC_SH_GOT_MEDLOW16     \

   || (FIX)->fx_r_type == BFD_RELOC_SH_GOT_MEDHI16      \

   || (FIX)->fx_r_type == BFD_RELOC_SH_GOT_HI16         \

   || (FIX)->fx_r_type == BFD_RELOC_SH_GOT10BY4         \

   || (FIX)->fx_r_type == BFD_RELOC_SH_GOT10BY8         \

   || (FIX)->fx_r_type == BFD_RELOC_SH_GOTPLT32         \

   || (FIX)->fx_r_type == BFD_RELOC_SH_GOTPLT_LOW16     \

   || (FIX)->fx_r_type == BFD_RELOC_SH_GOTPLT_MEDLOW16  \

   || (FIX)->fx_r_type == BFD_RELOC_SH_GOTPLT_MEDHI16   \

   || (FIX)->fx_r_type == BFD_RELOC_SH_GOTPLT_HI16      \

   || (FIX)->fx_r_type == BFD_RELOC_SH_GOTPLT10BY4      \

   || (FIX)->fx_r_type == BFD_RELOC_SH_GOTPLT10BY8      \

   || (FIX)->fx_r_type == BFD_RELOC_SH_GOTPC            \

   || (FIX)->fx_r_type == BFD_RELOC_SH_GOTPC_LOW16      \

   || (FIX)->fx_r_type == BFD_RELOC_SH_GOTPC_MEDLOW16   \

   || (FIX)->fx_r_type == BFD_RELOC_SH_GOTPC_MEDHI16    \

   || (FIX)->fx_r_type == BFD_RELOC_SH_GOTPC_HI16       \

   || TC_FORCE_RELOCATION (FIX))

#undef TC_FORCE_RELOCATION_SUB_SAME

#define TC_FORCE_RELOCATION_SUB_SAME(FIX, SEC)          \

  (! SEG_NORMAL (SEC)                                   \

   || TC_FORCE_RELOCATION (FIX)                         \

   || (sh_relax && SWITCH_TABLE (FIX))                  \

   || *symbol_get_tc ((FIX)->fx_addsy) != NULL)

/* Don't complain when we leave fx_subsy around.  */

#undef TC_VALIDATE_FIX_SUB

#define TC_VALIDATE_FIX_SUB(FIX, SEG)                   \

  ((md_register_arithmetic || (SEG) != reg_section)     \

   && ((FIX)->fx_r_type == BFD_RELOC_32_PLT_PCREL       \

       || (sh_relax && SWITCH_TABLE (FIX))              \

       || *symbol_get_tc ((FIX)->fx_addsy) != NULL))

/* Note the kludge: we want to put back C, and we also want to consume the

   expression, since we have handled it ourselves.  FIXME: What we really

   need is a new GAS infrastructure feature: md_qualifier.  */

#undef md_parse_name

#define md_parse_name(NAME, EXP, MODE, CP) \

 sh64_consume_datalabel (NAME, EXP, MODE, CP, operand)

extern int sh64_consume_datalabel (const char *, expressionS *,

                                   enum expr_mode, char *,

                                   segT (*) (expressionS *, enum expr_mode));

/* Saying "$" is the same as saying ".".  */

#define DOLLAR_DOT

#undef MD_PCREL_FROM_SECTION

#define MD_PCREL_FROM_SECTION(FIX, SEC)         \

  shmedia_md_pcrel_from_section (FIX, SEC)

extern valueT shmedia_md_pcrel_from_section (struct fix *, segT);

/* We need to mark this symbol as a BranchTarget; setting st_other for it

   and adding 1 to its value (temporarily).  */

extern void sh64_frob_label (symbolS *);

#undef  tc_frob_label

#define tc_frob_label(sym) \

  do { sh_frob_label (sym); sh64_frob_label (sym); } while (0)

#define tc_symbol_new_hook(s) sh64_frob_label (s)

/* We use this to mark our "datalabel" symbol copies.  The "mark" is NULL

   for an ordinary symbol, and the pointer to the "ordinary" symbol for a

   datalabel symbol.  */

#define TC_SYMFIELD_TYPE symbolS *

#define tc_frob_symbol(symp, punt)              \

 do                                             \

   {                                            \

     punt = sh64_exclude_symbol (symp);         \

   }                                            \

 while (0)

extern int sh64_exclude_symbol (symbolS *);

extern void sh64_adjust_symtab (void);

#define tc_adjust_symtab sh64_adjust_symtab

#undef  md_flush_pending_output

#define md_flush_pending_output() sh64_flush_pending_output ()

extern void sh64_flush_pending_output (void);

/* Note that tc-sh.c has a sh_frob_section, but it's called from

   tc_frob_file_before_adjust.  */

#define tc_frob_section(sec) shmedia_frob_section_type (sec)

extern void shmedia_frob_section_type (asection *);

/* We need to emit fixups relative to the frag in which the instruction

   resides.  Safest way without calculating max fragment growth or making

   it a fixed number is to provide a pointer to the opcode frag.

   We also need to emit the right NOP pattern in .align frags.  This is

   done after the text-to-bits assembly pass, so we need to mark it with

   the ISA setting at the time the .align was assembled.  */

#define TC_FRAG_TYPE struct sh64_tc_frag_data

enum sh64_isa_values

 {

   sh64_isa_unspecified,

   sh64_isa_shcompact,

   sh64_isa_shmedia,

   /* Special guard value used in contexts when we don't know which ISA it

      is, just that it's specified (not sh64_isa_unspecified).  */

   sh64_isa_sh5_guard

 };

struct sh64_tc_frag_data

{

  fragS *opc_frag;

  enum sh64_isa_values isa;

};

extern enum sh64_isa_values sh64_isa_mode;

#define TC_FRAG_INIT(FRAGP)                                     \

 do                                                             \

   {                                                            \

     (FRAGP)->tc_frag_data.opc_frag = sh64_last_insn_frag;      \

     (FRAGP)->tc_frag_data.isa = sh64_isa_mode;                 \

   }                                                            \

 while (0)

/* This variable is set whenever we generate (or grow) a new opcode frag

   in shmedia_build_Mytes.  */

extern fragS *sh64_last_insn_frag;

#define md_end() shmedia_md_end ()

void shmedia_md_end (void);

/* Because we make .debug_line hold the SHmedia instruction address | 1,

   we have to say we only have minimum byte-size insns.  */

#undef  DWARF2_LINE_MIN_INSN_LENGTH

#define DWARF2_LINE_MIN_INSN_LENGTH 1

#define TC_FAKE_LABEL(NAME) sh64_fake_label(NAME)

extern int sh64_fake_label (const char *);