URL https://opencores.org/ocsvn/open8_urisc/open8_urisc/trunk

Subversion Repositories open8_urisc

[/] [open8_urisc/] [trunk/] [gnu/] [binutils/] [include/] [xtensa-config.h] - Blame information for rev 147

Go to most recent revision | Details | Compare with Previous | View Log


/* Xtensa configuration settings.
   Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2010
   Free Software Foundation, Inc.
   Contributed by Bob Wilson (bob.wilson@acm.org) at Tensilica.
 
   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2, or (at your option)
   any later version.
 
   This program is distributed in the hope that it will be useful, but
   WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
   General Public License for more details.
 
   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software
   Foundation, 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.  */
 
#ifndef XTENSA_CONFIG_H
#define XTENSA_CONFIG_H
 
/* The macros defined here match those with the same names in the Xtensa
   compile-time HAL (Hardware Abstraction Layer).  Please refer to the
   Xtensa System Software Reference Manual for documentation of these
   macros.  */
 
#undef XCHAL_HAVE_BE
#define XCHAL_HAVE_BE                   1
 
#undef XCHAL_HAVE_DENSITY
#define XCHAL_HAVE_DENSITY              1
 
#undef XCHAL_HAVE_CONST16
#define XCHAL_HAVE_CONST16              0
 
#undef XCHAL_HAVE_ABS
#define XCHAL_HAVE_ABS                  1
 
#undef XCHAL_HAVE_ADDX
#define XCHAL_HAVE_ADDX                 1
 
#undef XCHAL_HAVE_L32R
#define XCHAL_HAVE_L32R                 1
 
#undef XSHAL_USE_ABSOLUTE_LITERALS
#define XSHAL_USE_ABSOLUTE_LITERALS     0
 
#undef XSHAL_HAVE_TEXT_SECTION_LITERALS
#define XSHAL_HAVE_TEXT_SECTION_LITERALS 1 /* Set if there is some memory that allows both code and literals.  */
 
#undef XCHAL_HAVE_MAC16
#define XCHAL_HAVE_MAC16                0
 
#undef XCHAL_HAVE_MUL16
#define XCHAL_HAVE_MUL16                1
 
#undef XCHAL_HAVE_MUL32
#define XCHAL_HAVE_MUL32                1
 
#undef XCHAL_HAVE_MUL32_HIGH
#define XCHAL_HAVE_MUL32_HIGH           0
 
#undef XCHAL_HAVE_DIV32
#define XCHAL_HAVE_DIV32                1
 
#undef XCHAL_HAVE_NSA
#define XCHAL_HAVE_NSA                  1
 
#undef XCHAL_HAVE_MINMAX
#define XCHAL_HAVE_MINMAX               1
 
#undef XCHAL_HAVE_SEXT
#define XCHAL_HAVE_SEXT                 1
 
#undef XCHAL_HAVE_LOOPS
#define XCHAL_HAVE_LOOPS                1
 
#undef XCHAL_HAVE_THREADPTR
#define XCHAL_HAVE_THREADPTR            1
 
#undef XCHAL_HAVE_RELEASE_SYNC
#define XCHAL_HAVE_RELEASE_SYNC         1
 
#undef XCHAL_HAVE_S32C1I
#define XCHAL_HAVE_S32C1I               1
 
#undef XCHAL_HAVE_BOOLEANS
#define XCHAL_HAVE_BOOLEANS             0
 
#undef XCHAL_HAVE_FP
#define XCHAL_HAVE_FP                   0
 
#undef XCHAL_HAVE_FP_DIV
#define XCHAL_HAVE_FP_DIV               0
 
#undef XCHAL_HAVE_FP_RECIP
#define XCHAL_HAVE_FP_RECIP             0
 
#undef XCHAL_HAVE_FP_SQRT
#define XCHAL_HAVE_FP_SQRT              0
 
#undef XCHAL_HAVE_FP_RSQRT
#define XCHAL_HAVE_FP_RSQRT             0
 
#undef XCHAL_HAVE_DFP_accel
#define XCHAL_HAVE_DFP_accel                    0
#undef XCHAL_HAVE_WINDOWED
#define XCHAL_HAVE_WINDOWED             1
 
#undef XCHAL_NUM_AREGS
#define XCHAL_NUM_AREGS                 32
 
#undef XCHAL_HAVE_WIDE_BRANCHES
#define XCHAL_HAVE_WIDE_BRANCHES        0
 
#undef XCHAL_HAVE_PREDICTED_BRANCHES
#define XCHAL_HAVE_PREDICTED_BRANCHES   0
 
 
#undef XCHAL_ICACHE_SIZE
#define XCHAL_ICACHE_SIZE               16384
 
#undef XCHAL_DCACHE_SIZE
#define XCHAL_DCACHE_SIZE               16384
 
#undef XCHAL_ICACHE_LINESIZE
#define XCHAL_ICACHE_LINESIZE           32
 
#undef XCHAL_DCACHE_LINESIZE
#define XCHAL_DCACHE_LINESIZE           32
 
#undef XCHAL_ICACHE_LINEWIDTH
#define XCHAL_ICACHE_LINEWIDTH          5
 
#undef XCHAL_DCACHE_LINEWIDTH
#define XCHAL_DCACHE_LINEWIDTH          5
 
#undef XCHAL_DCACHE_IS_WRITEBACK
#define XCHAL_DCACHE_IS_WRITEBACK       1
 
 
#undef XCHAL_HAVE_MMU
#define XCHAL_HAVE_MMU                  1
 
#undef XCHAL_MMU_MIN_PTE_PAGE_SIZE
#define XCHAL_MMU_MIN_PTE_PAGE_SIZE     12
 
 
#undef XCHAL_HAVE_DEBUG
#define XCHAL_HAVE_DEBUG                1
 
#undef XCHAL_NUM_IBREAK
#define XCHAL_NUM_IBREAK                2
 
#undef XCHAL_NUM_DBREAK
#define XCHAL_NUM_DBREAK                2
 
#undef XCHAL_DEBUGLEVEL
#define XCHAL_DEBUGLEVEL                6
 
 
#undef XCHAL_MAX_INSTRUCTION_SIZE
#define XCHAL_MAX_INSTRUCTION_SIZE      3
 
#undef XCHAL_INST_FETCH_WIDTH
#define XCHAL_INST_FETCH_WIDTH          4
 
 
#undef XSHAL_ABI
#undef XTHAL_ABI_WINDOWED
#undef XTHAL_ABI_CALL0
#define XSHAL_ABI                       XTHAL_ABI_WINDOWED
#define XTHAL_ABI_WINDOWED              0
#define XTHAL_ABI_CALL0                 1
 
#endif /* !XTENSA_CONFIG_H */

Line No.	Rev	Author	Line
1	17	khays	`/* Xtensa configuration settings.`
2			`Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2010`
3			`Free Software Foundation, Inc.`
4			`Contributed by Bob Wilson (bob.wilson@acm.org) at Tensilica.`
5
6			`This program is free software; you can redistribute it and/or modify`
7			`it under the terms of the GNU General Public License as published by`
8			`the Free Software Foundation; either version 2, or (at your option)`
9			`any later version.`
10
11			`This program is distributed in the hope that it will be useful, but`
12			`WITHOUT ANY WARRANTY; without even the implied warranty of`
13			`MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU`
14			`General Public License for more details.`
15
16			`You should have received a copy of the GNU General Public License`
17			`along with this program; if not, write to the Free Software`
18			`Foundation, 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */`
19
20			`#ifndef XTENSA_CONFIG_H`
21			`#define XTENSA_CONFIG_H`
22
23			`/* The macros defined here match those with the same names in the Xtensa`
24			`compile-time HAL (Hardware Abstraction Layer). Please refer to the`
25			`Xtensa System Software Reference Manual for documentation of these`
26			`macros. */`
27
28			`#undef XCHAL_HAVE_BE`
29			`#define XCHAL_HAVE_BE 1`
30
31			`#undef XCHAL_HAVE_DENSITY`
32			`#define XCHAL_HAVE_DENSITY 1`
33
34			`#undef XCHAL_HAVE_CONST16`
35			`#define XCHAL_HAVE_CONST16 0`
36
37			`#undef XCHAL_HAVE_ABS`
38			`#define XCHAL_HAVE_ABS 1`
39
40			`#undef XCHAL_HAVE_ADDX`
41			`#define XCHAL_HAVE_ADDX 1`
42
43			`#undef XCHAL_HAVE_L32R`
44			`#define XCHAL_HAVE_L32R 1`
45
46			`#undef XSHAL_USE_ABSOLUTE_LITERALS`
47			`#define XSHAL_USE_ABSOLUTE_LITERALS 0`
48
49			`#undef XSHAL_HAVE_TEXT_SECTION_LITERALS`
50			`#define XSHAL_HAVE_TEXT_SECTION_LITERALS 1 /* Set if there is some memory that allows both code and literals. */`
51
52			`#undef XCHAL_HAVE_MAC16`
53			`#define XCHAL_HAVE_MAC16 0`
54
55			`#undef XCHAL_HAVE_MUL16`
56			`#define XCHAL_HAVE_MUL16 1`
57
58			`#undef XCHAL_HAVE_MUL32`
59			`#define XCHAL_HAVE_MUL32 1`
60
61			`#undef XCHAL_HAVE_MUL32_HIGH`
62			`#define XCHAL_HAVE_MUL32_HIGH 0`
63
64			`#undef XCHAL_HAVE_DIV32`
65			`#define XCHAL_HAVE_DIV32 1`
66
67			`#undef XCHAL_HAVE_NSA`
68			`#define XCHAL_HAVE_NSA 1`
69
70			`#undef XCHAL_HAVE_MINMAX`
71			`#define XCHAL_HAVE_MINMAX 1`
72
73			`#undef XCHAL_HAVE_SEXT`
74			`#define XCHAL_HAVE_SEXT 1`
75
76			`#undef XCHAL_HAVE_LOOPS`
77			`#define XCHAL_HAVE_LOOPS 1`
78
79			`#undef XCHAL_HAVE_THREADPTR`
80			`#define XCHAL_HAVE_THREADPTR 1`
81
82			`#undef XCHAL_HAVE_RELEASE_SYNC`
83			`#define XCHAL_HAVE_RELEASE_SYNC 1`
84
85			`#undef XCHAL_HAVE_S32C1I`
86			`#define XCHAL_HAVE_S32C1I 1`
87
88			`#undef XCHAL_HAVE_BOOLEANS`
89			`#define XCHAL_HAVE_BOOLEANS 0`
90
91			`#undef XCHAL_HAVE_FP`
92			`#define XCHAL_HAVE_FP 0`
93
94			`#undef XCHAL_HAVE_FP_DIV`
95			`#define XCHAL_HAVE_FP_DIV 0`
96
97			`#undef XCHAL_HAVE_FP_RECIP`
98			`#define XCHAL_HAVE_FP_RECIP 0`
99
100			`#undef XCHAL_HAVE_FP_SQRT`
101			`#define XCHAL_HAVE_FP_SQRT 0`
102
103			`#undef XCHAL_HAVE_FP_RSQRT`
104			`#define XCHAL_HAVE_FP_RSQRT 0`
105
106			`#undef XCHAL_HAVE_DFP_accel`
107			`#define XCHAL_HAVE_DFP_accel 0`
108			`#undef XCHAL_HAVE_WINDOWED`
109			`#define XCHAL_HAVE_WINDOWED 1`
110
111			`#undef XCHAL_NUM_AREGS`
112			`#define XCHAL_NUM_AREGS 32`
113
114			`#undef XCHAL_HAVE_WIDE_BRANCHES`
115			`#define XCHAL_HAVE_WIDE_BRANCHES 0`
116
117			`#undef XCHAL_HAVE_PREDICTED_BRANCHES`
118			`#define XCHAL_HAVE_PREDICTED_BRANCHES 0`
119
120
121			`#undef XCHAL_ICACHE_SIZE`
122			`#define XCHAL_ICACHE_SIZE 16384`
123
124			`#undef XCHAL_DCACHE_SIZE`
125			`#define XCHAL_DCACHE_SIZE 16384`
126
127			`#undef XCHAL_ICACHE_LINESIZE`
128			`#define XCHAL_ICACHE_LINESIZE 32`
129
130			`#undef XCHAL_DCACHE_LINESIZE`
131			`#define XCHAL_DCACHE_LINESIZE 32`
132
133			`#undef XCHAL_ICACHE_LINEWIDTH`
134			`#define XCHAL_ICACHE_LINEWIDTH 5`
135
136			`#undef XCHAL_DCACHE_LINEWIDTH`
137			`#define XCHAL_DCACHE_LINEWIDTH 5`
138
139			`#undef XCHAL_DCACHE_IS_WRITEBACK`
140			`#define XCHAL_DCACHE_IS_WRITEBACK 1`
141
142
143			`#undef XCHAL_HAVE_MMU`
144			`#define XCHAL_HAVE_MMU 1`
145
146			`#undef XCHAL_MMU_MIN_PTE_PAGE_SIZE`
147			`#define XCHAL_MMU_MIN_PTE_PAGE_SIZE 12`
148
149
150			`#undef XCHAL_HAVE_DEBUG`
151			`#define XCHAL_HAVE_DEBUG 1`
152
153			`#undef XCHAL_NUM_IBREAK`
154			`#define XCHAL_NUM_IBREAK 2`
155
156			`#undef XCHAL_NUM_DBREAK`
157			`#define XCHAL_NUM_DBREAK 2`
158
159			`#undef XCHAL_DEBUGLEVEL`
160			`#define XCHAL_DEBUGLEVEL 6`
161
162
163			`#undef XCHAL_MAX_INSTRUCTION_SIZE`
164			`#define XCHAL_MAX_INSTRUCTION_SIZE 3`
165
166			`#undef XCHAL_INST_FETCH_WIDTH`
167			`#define XCHAL_INST_FETCH_WIDTH 4`
168
169
170			`#undef XSHAL_ABI`
171			`#undef XTHAL_ABI_WINDOWED`
172			`#undef XTHAL_ABI_CALL0`
173			`#define XSHAL_ABI XTHAL_ABI_WINDOWED`
174			`#define XTHAL_ABI_WINDOWED 0`
175			`#define XTHAL_ABI_CALL0 1`
176
177			`#endif /* !XTENSA_CONFIG_H */`

Browse

Tools

Subversion Repositories open8_urisc

[/] [open8_urisc/] [trunk/] [gnu/] [binutils/] [include/] [xtensa-config.h] - Blame information for rev 147