Subversion Repositories open8_urisc

# Makefile for the libiberty library.

# Originally written by K. Richard Pixley .

#

# Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,

# 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011

# Free Software Foundation

#

# This file is part of the libiberty library.

# Libiberty is free software; you can redistribute it and/or

# modify it under the terms of the GNU Library General Public

# License as published by the Free Software Foundation; either

# version 2 of the License, or (at your option) any later version.

#

# Libiberty is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU

# Library General Public License for more details.

#

# You should have received a copy of the GNU Library General Public

# License along with libiberty; see the file COPYING.LIB.  If not,

# write to the Free Software Foundation, Inc., 51 Franklin Street - Fifth Floor,

# Boston, MA 02110-1301, USA.

libiberty_topdir = @libiberty_topdir@

srcdir = @srcdir@

prefix = @prefix@

exec_prefix = @exec_prefix@

bindir = @bindir@

libdir = @libdir@

includedir = @includedir@

target_header_dir = @target_header_dir@

objext = @OBJEXT@

SHELL = @SHELL@

# Multilib support variables.

MULTISRCTOP =

MULTIBUILDTOP =

MULTIDIRS =

MULTISUBDIR =

MULTIDO = true

MULTICLEAN = true

INSTALL = @INSTALL@

INSTALL_PROGRAM = @INSTALL_PROGRAM@

INSTALL_DATA = @INSTALL_DATA@

mkinstalldirs = $(SHELL) $(libiberty_topdir)/mkinstalldirs

# Some compilers can't handle cc -c blah.c -o foo/blah.o.

OUTPUT_OPTION = @OUTPUT_OPTION@

AR = @AR@

AR_FLAGS = rc

CC = @CC@

CFLAGS = @CFLAGS@

CPPFLAGS = @CPPFLAGS@

RANLIB = @RANLIB@

MAKEINFO = @MAKEINFO@

PERL = @PERL@

PICFLAG = @PICFLAG@

MAKEOVERRIDES =

TARGETLIB = ./libiberty.a

TESTLIB = ./testlib.a

LIBOBJS = @LIBOBJS@

# A configuration can specify extra .o files that should be included,

# even if they are in libc. (Perhaps the libc version is buggy.)

EXTRA_OFILES =

# Flags to pass to a recursive make.

FLAGS_TO_PASS = \

        "AR=$(AR)" \

        "AR_FLAGS=$(AR_FLAGS)" \

        "CC=$(CC)" \

        "CFLAGS=$(CFLAGS)" \

        "CPPFLAGS=$(CPPFLAGS)" \

        "DESTDIR=$(DESTDIR)" \

        "EXTRA_OFILES=$(EXTRA_OFILES)" \

        "HDEFINES=$(HDEFINES)" \

        "INSTALL=$(INSTALL)" \

        "INSTALL_DATA=$(INSTALL_DATA)" \

        "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \

        "LDFLAGS=$(LDFLAGS)" \

        "LOADLIBES=$(LOADLIBES)" \

        "RANLIB=$(RANLIB)" \

        "SHELL=$(SHELL)" \

        "prefix=$(prefix)" \

        "exec_prefix=$(exec_prefix)" \

        "libdir=$(libdir)" \

        "libsubdir=$(libsubdir)" \

        "tooldir=$(tooldir)"

# Subdirectories to recurse into. We need to override this during cleaning

SUBDIRS = testsuite

# FIXME: add @BUILD_INFO@ once we're sure it works for everyone.

all: stamp-picdir $(TARGETLIB) required-list all-subdir

        @: $(MAKE) ; $(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=all

.PHONY: check installcheck

check: check-subdir

installcheck: installcheck-subdir

@host_makefile_frag@

INCDIR=$(srcdir)/$(MULTISRCTOP)../include

COMPILE.c = $(CC) -c @DEFS@ $(CFLAGS) $(CPPFLAGS) -I. -I$(INCDIR) $(HDEFINES) @ac_libiberty_warn_cflags@

# Just to make sure we don't use a built-in rule with VPATH

.c.$(objext):

        false

# NOTE: If you add new files to the library, add them to this list

# (alphabetical), and add them to REQUIRED_OFILES, or

# CONFIGURED_OFILES and funcs in configure.ac.  Also run "make maint-deps"

# to build the new rules.

CFILES = alloca.c argv.c asprintf.c atexit.c                            \

        basename.c bcmp.c bcopy.c bsearch.c bzero.c                     \

        calloc.c choose-temp.c clock.c concat.c cp-demangle.c           \

         cp-demint.c cplus-dem.c crc32.c                                \

        dyn-string.c                                                    \

        fdmatch.c ffs.c fibheap.c filename_cmp.c floatformat.c          \

        fnmatch.c fopen_unlocked.c                                      \

        getcwd.c getopt.c getopt1.c getpagesize.c getpwd.c getruntime.c \

         gettimeofday.c                                                 \

        hashtab.c hex.c                                                 \

        index.c insque.c                                                \

        lbasename.c                                                     \

        lrealpath.c                                                     \

        make-relative-prefix.c                                          \

        make-temp-file.c md5.c memchr.c memcmp.c memcpy.c memmem.c      \

         memmove.c mempcpy.c memset.c mkstemps.c                        \

        objalloc.c obstack.c                                            \

        partition.c pexecute.c                                          \

         pex-common.c pex-djgpp.c pex-msdos.c pex-one.c                 \

         pex-unix.c pex-win32.c                                         \

         physmem.c putenv.c                                             \

        random.c regex.c rename.c rindex.c                              \

        safe-ctype.c setenv.c setproctitle.c sha1.c sigsetmask.c        \

         simple-object.c simple-object-coff.c simple-object-elf.c       \

         simple-object-mach-o.c                                         \

         snprintf.c sort.c                                              \

         spaces.c splay-tree.c stack-limit.c stpcpy.c stpncpy.c         \

         strcasecmp.c strchr.c strdup.c strerror.c strncasecmp.c        \

         strncmp.c strrchr.c strsignal.c strstr.c strtod.c strtol.c     \

         strtoul.c strndup.c strverscmp.c                               \

        timeval-utils.c tmpnam.c                                        \

        unlink-if-ordinary.c                                            \

        vasprintf.c vfork.c vfprintf.c vprintf.c vsnprintf.c vsprintf.c \

        waitpid.c                                                       \

        xatexit.c xexit.c xmalloc.c xmemdup.c xstrdup.c xstrerror.c     \

         xstrndup.c

# These are always included in the library.  The first four are listed

# first and by compile time to optimize parallel builds.

REQUIRED_OFILES =                                                       \

        ./regex.$(objext) ./cplus-dem.$(objext) ./cp-demangle.$(objext) \

        ./md5.$(objext) ./sha1.$(objext) ./alloca.$(objext)             \

        ./argv.$(objext)                                                \

        ./choose-temp.$(objext) ./concat.$(objext)                      \

        ./cp-demint.$(objext) ./crc32.$(objext) ./dyn-string.$(objext)  \

        ./fdmatch.$(objext) ./fibheap.$(objext)                         \

        ./filename_cmp.$(objext) ./floatformat.$(objext)                \

        ./fnmatch.$(objext) ./fopen_unlocked.$(objext)                  \

        ./getopt.$(objext) ./getopt1.$(objext) ./getpwd.$(objext)       \

        ./getruntime.$(objext) ./hashtab.$(objext) ./hex.$(objext)      \

        ./lbasename.$(objext) ./lrealpath.$(objext)                     \

        ./make-relative-prefix.$(objext) ./make-temp-file.$(objext)     \

        ./objalloc.$(objext)                                            \

        ./obstack.$(objext)                                             \

        ./partition.$(objext) ./pexecute.$(objext) ./physmem.$(objext)  \

        ./pex-common.$(objext) ./pex-one.$(objext)                      \

        ./@pexecute@.$(objext)                                          \

        ./safe-ctype.$(objext)                                          \

        ./simple-object.$(objext) ./simple-object-coff.$(objext)        \

        ./simple-object-elf.$(objext) ./simple-object-mach-o.$(objext)  \

        ./sort.$(objext) ./spaces.$(objext)                             \

        ./splay-tree.$(objext) ./stack-limit.$(objext)                  \

        ./strerror.$(objext) ./strsignal.$(objext)                      \

        ./timeval-utils.$(objext) ./unlink-if-ordinary.$(objext)        \

        ./xatexit.$(objext) ./xexit.$(objext) ./xmalloc.$(objext)       \

        ./xmemdup.$(objext) ./xstrdup.$(objext) ./xstrerror.$(objext)   \

        ./xstrndup.$(objext)

# These are all the objects that configure may add to the library via

# $funcs or EXTRA_OFILES.  This list exists here only for "make

# maint-missing" and "make check".

CONFIGURED_OFILES = ./asprintf.$(objext) ./atexit.$(objext)             \

        ./basename.$(objext) ./bcmp.$(objext) ./bcopy.$(objext)         \

        ./bsearch.$(objext) ./bzero.$(objext)                           \

        ./calloc.$(objext) ./clock.$(objext) ./copysign.$(objext)       \

        ./_doprnt.$(objext)                                             \

         ./ffs.$(objext)                                                \

        ./getcwd.$(objext) ./getpagesize.$(objext)                      \

         ./gettimeofday.$(objext)                                       \

        ./index.$(objext) ./insque.$(objext)                            \

        ./memchr.$(objext) ./memcmp.$(objext) ./memcpy.$(objext)        \

        ./memmem.$(objext) ./memmove.$(objext)                          \

         ./mempcpy.$(objext) ./memset.$(objext) ./mkstemps.$(objext)    \

        ./pex-djgpp.$(objext) ./pex-msdos.$(objext)                     \

         ./pex-unix.$(objext) ./pex-win32.$(objext)                     \

         ./putenv.$(objext)                                             \

        ./random.$(objext) ./rename.$(objext) ./rindex.$(objext)        \

        ./setenv.$(objext)                                              \

         ./setproctitle.$(objext)                                       \

         ./sigsetmask.$(objext) ./snprintf.$(objext)                    \

         ./stpcpy.$(objext) ./stpncpy.$(objext) ./strcasecmp.$(objext)  \

         ./strchr.$(objext) ./strdup.$(objext) ./strncasecmp.$(objext)  \

         ./strncmp.$(objext) ./strndup.$(objext) ./strrchr.$(objext)    \

         ./strstr.$(objext) ./strtod.$(objext) ./strtol.$(objext)       \

         ./strtoul.$(objext) ./strverscmp.$(objext)                     \

        ./tmpnam.$(objext)                                              \

        ./vasprintf.$(objext) ./vfork.$(objext) ./vfprintf.$(objext)    \

         ./vprintf.$(objext) ./vsnprintf.$(objext) ./vsprintf.$(objext) \

        ./waitpid.$(objext)

# These files are installed if the library has been configured to do so.

INSTALLED_HEADERS =                                                     \

        $(INCDIR)/ansidecl.h                                            \

        $(INCDIR)/demangle.h                                            \

        $(INCDIR)/dyn-string.h                                          \

        $(INCDIR)/fibheap.h                                             \

        $(INCDIR)/floatformat.h                                         \

        $(INCDIR)/hashtab.h                                             \

        $(INCDIR)/libiberty.h                                           \

        $(INCDIR)/objalloc.h                                            \

        $(INCDIR)/partition.h                                           \

        $(INCDIR)/safe-ctype.h                                          \

        $(INCDIR)/sort.h                                                \

        $(INCDIR)/splay-tree.h \

        $(INCDIR)/timeval-utils.h

$(TARGETLIB): $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS)

        -rm -f $(TARGETLIB) pic/$(TARGETLIB)

        $(AR) $(AR_FLAGS) $(TARGETLIB) \

          $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS)

        $(RANLIB) $(TARGETLIB)

        if [ x"$(PICFLAG)" != x ]; then \

          cd pic; \

          $(AR) $(AR_FLAGS) $(TARGETLIB) \

            $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS); \

          $(RANLIB) $(TARGETLIB); \

          cd ..; \

        else true; fi

$(TESTLIB): $(REQUIRED_OFILES) $(CONFIGURED_OFILES)

        -rm -f $(TESTLIB)

        $(AR) $(AR_FLAGS) $(TESTLIB) \

          $(REQUIRED_OFILES) $(CONFIGURED_OFILES)

        $(RANLIB) $(TESTLIB)

info: libiberty.info info-subdir

install-info: install-info-subdir

clean-info: clean-info-subdir

dvi: libiberty.dvi dvi-subdir

LIBIBERTY_PDFFILES = libiberty.pdf

pdf: $(LIBIBERTY_PDFFILES) pdf-subdir

.PHONY: install-pdf

pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;

install-pdf: $(LIBIBERTY_PDFFILES)

        @$(NORMAL_INSTALL)

        test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"

        @list='$(LIBIBERTY_PDFFILES)'; for p in $$list; do \

          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \

          f=$(pdf__strip_dir) \

          echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \

          $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \

        done

# html, install-html targets

HTMLS = libiberty.html

html: $(HTMLS)

.PHONY: install-html install-html-am

NORMAL_INSTALL = :

mkdir_p = mkdir -p --

html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;

install-html: install-html-am

install-html-am: $(HTMLS)

        @$(NORMAL_INSTALL)

        test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"

        @list='$(HTMLS)'; for p in $$list; do \

          if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \

          f=$(html__strip_dir) \

          if test -d "$$d$$p"; then \

            echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \

            $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \

            echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \

            $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \

          else \

            echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \

            $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \

          fi; \

        done

TEXISRC = \

        $(srcdir)/libiberty.texi \

        $(srcdir)/copying-lib.texi \

        $(srcdir)/obstacks.texi \

        $(srcdir)/functions.texi

# Additional files that have texi snippets that need to be collected

# and sorted.  Some are here because the sources are imported from

# elsewhere.  Others represent headers in ../include.

TEXIFILES = fnmatch.txh pexecute.txh simple-object.txh

libiberty.info : $(srcdir)/libiberty.texi $(TEXISRC)

        $(MAKEINFO) -I$(srcdir) $(srcdir)/libiberty.texi

libiberty.dvi : $(srcdir)/libiberty.texi $(TEXISRC)

        texi2dvi $(srcdir)/libiberty.texi

libiberty.pdf : $(srcdir)/libiberty.texi $(TEXISRC)

        texi2pdf $(srcdir)/libiberty.texi

libiberty.html : $(srcdir)/libiberty.texi $(TEXISRC)

        $(MAKEINFO) --no-split --html -I$(srcdir) -o $@ $<

@MAINT@$(srcdir)/functions.texi : stamp-functions

@MAINT@ @true

@MAINT@stamp-functions : $(CFILES:%=$(srcdir)/%) $(TEXIFILES:%=$(srcdir)/%) $(srcdir)/gather-docs Makefile

@MAINT@@HAVE_PERL@      $(PERL) $(srcdir)/gather-docs $(srcdir) $(srcdir)/functions.texi $(CFILES) $(TEXIFILES)

@MAINT@ echo stamp > stamp-functions

INSTALL_DEST = @INSTALL_DEST@

install: install_to_$(INSTALL_DEST) install-subdir

install-strip: install

.PHONY: install install-strip

# This is tricky.  Even though CC in the Makefile contains

# multilib-specific flags, it's overridden by FLAGS_TO_PASS from the

# default multilib, so we have to take CFLAGS into account as well,

# since it will be passed the multilib flags.

MULTIOSDIR = `$(CC) $(CFLAGS) -print-multi-os-directory`

install_to_libdir: all

        ${mkinstalldirs} $(DESTDIR)$(libdir)/$(MULTIOSDIR)

        $(INSTALL_DATA) $(TARGETLIB) $(DESTDIR)$(libdir)/$(MULTIOSDIR)/$(TARGETLIB)n

        ( cd $(DESTDIR)$(libdir)/$(MULTIOSDIR) ; chmod 644 $(TARGETLIB)n ;$(RANLIB) $(TARGETLIB)n )

        mv -f $(DESTDIR)$(libdir)/$(MULTIOSDIR)/$(TARGETLIB)n $(DESTDIR)$(libdir)/$(MULTIOSDIR)/$(TARGETLIB)

        if test -n "${target_header_dir}"; then \

          case "${target_header_dir}" in \

            /*)    thd=${target_header_dir};; \

            *)     thd=${includedir}/${target_header_dir};; \

          esac; \

          ${mkinstalldirs} $(DESTDIR)$${thd}; \

          for h in ${INSTALLED_HEADERS}; do \

            ${INSTALL_DATA} $$h $(DESTDIR)$${thd}; \

          done; \

        fi

        @$(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=install

install_to_tooldir: all

        ${mkinstalldirs} $(DESTDIR)$(tooldir)/lib/$(MULTIOSDIR)

        $(INSTALL_DATA) $(TARGETLIB) $(DESTDIR)$(tooldir)/lib/$(MULTIOSDIR)/$(TARGETLIB)n

        ( cd $(DESTDIR)$(tooldir)/lib/$(MULTIOSDIR) ; chmod 644 $(TARGETLIB)n; $(RANLIB) $(TARGETLIB)n )

        mv -f $(DESTDIR)$(tooldir)/lib/$(MULTIOSDIR)/$(TARGETLIB)n $(DESTDIR)$(tooldir)/lib/$(MULTIOSDIR)/$(TARGETLIB)

        @$(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=install

# required-list was used when building a shared bfd/opcodes/libiberty

# library.  I don't know if it used by anything currently.

required-list: Makefile

        echo $(REQUIRED_OFILES) > required-list

stamp-picdir:

        if [ x"$(PICFLAG)" != x ] && [ ! -d pic ]; then \

          mkdir pic; \

        else true; fi

        touch stamp-picdir

.PHONY: all etags tags ls clean stage1 stage2

etags tags: TAGS etags-subdir

TAGS: $(CFILES)

        etags `for i in $(CFILES); do echo $(srcdir)/$$i ; done`

# The standalone demangler (c++filt) has been moved to binutils.

# But make this target work anyway for demangler hacking.

demangle: $(ALL) $(srcdir)/cp-demangle.c

        @echo "The standalone demangler, now named c++filt, is now"

        @echo "a part of binutils."

        $(CC) @DEFS@ $(CFLAGS) $(CPPFLAGS) -I. -I$(INCDIR) $(HDEFINES) \

          $(srcdir)/cp-demangle.c -DSTANDALONE_DEMANGLER $(TARGETLIB) -o $@

ls:

        @echo Makefile $(CFILES)

# Various targets for maintainers.

maint-missing :

        @$(PERL) $(srcdir)/maint-tool -s $(srcdir) missing $(CFILES) $(REQUIRED_OFILES) $(CONFIGURED_OFILES)

maint-buildall : $(REQUIRED_OFILES) $(CONFIGURED_OFILES)

        @true

maint-undoc : $(srcdir)/functions.texi

        @$(PERL) $(srcdir)/maint-tool -s $(srcdir) undoc

maint-deps :

        @$(PERL) $(srcdir)/maint-tool -s $(srcdir) deps $(INCDIR)

# Need to deal with profiled libraries, too.

# Cleaning has to be done carefully to ensure that we don't clean our SUBDIRS

# multiple times, hence our explicit recursion with an empty SUBDIRS.

mostlyclean: mostlyclean-subdir

        -rm -rf *.$(objext) pic core errs \#* *.E a.out

        -rm -f errors dummy config.h stamp-*

        -rm -f $(CONFIG_H) stamp-picdir

        -rm -f libiberty.aux libiberty.cp libiberty.cps libiberty.fn libiberty.ky

        -rm -f libiberty.log libiberty.tmp libiberty.tps libiberty.pg

        -rm -f libiberty.pgs libiberty.toc libiberty.tp libiberty.tpl libiberty.vr

        -rm -f libtexi.stamp

        @$(MULTICLEAN) multi-clean DO=mostlyclean

clean: clean-subdir

        $(MAKE) SUBDIRS="" mostlyclean

        -rm -f *.a required-list tmpmulti.out

        -rm -f libiberty.dvi libiberty.pdf libiberty.info* libiberty.html

        @$(MULTICLEAN) multi-clean DO=clean

distclean: distclean-subdir

        $(MAKE) SUBDIRS="" clean

        @$(MULTICLEAN) multi-clean DO=distclean

        -rm -f *~ Makefile config.cache config.status xhost-mkfrag TAGS multilib.out

        -rm -f config.log

        -rmdir testsuite 2>/dev/null

maintainer-clean realclean: maintainer-clean-subdir

        $(MAKE) SUBDIRS="" distclean

force:

Makefile: $(srcdir)/Makefile.in config.status

        CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) ./config.status

# Depending on Makefile makes sure that config.status has been re-run

# if needed.  This prevents problems with parallel builds.

config.h: stamp-h ; @true

stamp-h: $(srcdir)/config.in config.status Makefile

        CONFIG_FILES= CONFIG_HEADERS=config.h:$(srcdir)/config.in $(SHELL) ./config.status

config.status: $(srcdir)/configure

        $(SHELL) ./config.status --recheck

AUTOCONF = autoconf

configure_deps = $(srcdir)/aclocal.m4 \

        $(srcdir)/../config/acx.m4 \

        $(srcdir)/../config/no-executables.m4 \

        $(srcdir)/../config/override.m4 \

        $(srcdir)/../config/warnings.m4 \

$(srcdir)/configure: @MAINT@ $(srcdir)/configure.ac $(configure_deps)

        cd $(srcdir) && $(AUTOCONF)

# Depending on config.h makes sure that config.status has been re-run

# if needed.  This prevents problems with parallel builds, in case

# subdirectories need to run config.status also.

all-subdir check-subdir installcheck-subdir info-subdir \

install-info-subdir clean-info-subdir dvi-subdir pdf-subdir install-subdir      \

etags-subdir mostlyclean-subdir clean-subdir distclean-subdir \

maintainer-clean-subdir: config.h

        @subdirs='$(SUBDIRS)'; \

        target=`echo $@ | sed -e 's/-subdir//'`; \

        for dir in $$subdirs ; do \

          cd $$dir && $(MAKE) $(FLAGS_TO_PASS) $$target; \

        done

$(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS): stamp-picdir

$(CONFIGURED_OFILES): stamp-picdir

# Don't export variables to the environment, in order to not confuse

# configure.

.NOEXPORT:

# The dependencies in the remainder of this file are automatically

# generated by "make maint-deps".  Manual edits will be lost.

./_doprnt.$(objext): $(srcdir)/_doprnt.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/safe-ctype.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/_doprnt.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/_doprnt.c $(OUTPUT_OPTION)

./alloca.$(objext): $(srcdir)/alloca.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/libiberty.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/alloca.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/alloca.c $(OUTPUT_OPTION)

./argv.$(objext): $(srcdir)/argv.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/libiberty.h $(INCDIR)/safe-ctype.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/argv.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/argv.c $(OUTPUT_OPTION)

./asprintf.$(objext): $(srcdir)/asprintf.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/libiberty.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/asprintf.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/asprintf.c $(OUTPUT_OPTION)

./atexit.$(objext): $(srcdir)/atexit.c config.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/atexit.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/atexit.c $(OUTPUT_OPTION)

./basename.$(objext): $(srcdir)/basename.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/libiberty.h $(INCDIR)/safe-ctype.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/basename.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/basename.c $(OUTPUT_OPTION)

./bcmp.$(objext): $(srcdir)/bcmp.c

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/bcmp.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/bcmp.c $(OUTPUT_OPTION)

./bcopy.$(objext): $(srcdir)/bcopy.c

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/bcopy.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/bcopy.c $(OUTPUT_OPTION)

./bsearch.$(objext): $(srcdir)/bsearch.c config.h $(INCDIR)/ansidecl.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/bsearch.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/bsearch.c $(OUTPUT_OPTION)

./bzero.$(objext): $(srcdir)/bzero.c

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/bzero.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/bzero.c $(OUTPUT_OPTION)

./calloc.$(objext): $(srcdir)/calloc.c $(INCDIR)/ansidecl.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/calloc.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/calloc.c $(OUTPUT_OPTION)

./choose-temp.$(objext): $(srcdir)/choose-temp.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/libiberty.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/choose-temp.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/choose-temp.c $(OUTPUT_OPTION)

./clock.$(objext): $(srcdir)/clock.c config.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/clock.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/clock.c $(OUTPUT_OPTION)

./concat.$(objext): $(srcdir)/concat.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/libiberty.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/concat.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/concat.c $(OUTPUT_OPTION)

./copysign.$(objext): $(srcdir)/copysign.c $(INCDIR)/ansidecl.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/copysign.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/copysign.c $(OUTPUT_OPTION)

./cp-demangle.$(objext): $(srcdir)/cp-demangle.c config.h $(INCDIR)/ansidecl.h \

        $(srcdir)/cp-demangle.h $(INCDIR)/demangle.h \

        $(INCDIR)/dyn-string.h $(INCDIR)/getopt.h $(INCDIR)/libiberty.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/cp-demangle.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/cp-demangle.c $(OUTPUT_OPTION)

./cp-demint.$(objext): $(srcdir)/cp-demint.c config.h $(INCDIR)/ansidecl.h \

        $(srcdir)/cp-demangle.h $(INCDIR)/demangle.h \

        $(INCDIR)/libiberty.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/cp-demint.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/cp-demint.c $(OUTPUT_OPTION)

./cplus-dem.$(objext): $(srcdir)/cplus-dem.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/demangle.h $(INCDIR)/libiberty.h \

        $(INCDIR)/safe-ctype.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/cplus-dem.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/cplus-dem.c $(OUTPUT_OPTION)

./crc32.$(objext): $(srcdir)/crc32.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/libiberty.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/crc32.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/crc32.c $(OUTPUT_OPTION)

./dyn-string.$(objext): $(srcdir)/dyn-string.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/dyn-string.h $(INCDIR)/libiberty.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/dyn-string.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/dyn-string.c $(OUTPUT_OPTION)

./fdmatch.$(objext): $(srcdir)/fdmatch.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/libiberty.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/fdmatch.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/fdmatch.c $(OUTPUT_OPTION)

./ffs.$(objext): $(srcdir)/ffs.c

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/ffs.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/ffs.c $(OUTPUT_OPTION)

./fibheap.$(objext): $(srcdir)/fibheap.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/fibheap.h $(INCDIR)/libiberty.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/fibheap.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/fibheap.c $(OUTPUT_OPTION)

./filename_cmp.$(objext): $(srcdir)/filename_cmp.c config.h $(INCDIR)/filenames.h \

        $(INCDIR)/safe-ctype.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/filename_cmp.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/filename_cmp.c $(OUTPUT_OPTION)

./floatformat.$(objext): $(srcdir)/floatformat.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/floatformat.h $(INCDIR)/libiberty.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/floatformat.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/floatformat.c $(OUTPUT_OPTION)

./fnmatch.$(objext): $(srcdir)/fnmatch.c config.h $(INCDIR)/fnmatch.h \

        $(INCDIR)/safe-ctype.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/fnmatch.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/fnmatch.c $(OUTPUT_OPTION)

./fopen_unlocked.$(objext): $(srcdir)/fopen_unlocked.c config.h \

        $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/fopen_unlocked.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/fopen_unlocked.c $(OUTPUT_OPTION)

./getcwd.$(objext): $(srcdir)/getcwd.c config.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/getcwd.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/getcwd.c $(OUTPUT_OPTION)

./getopt.$(objext): $(srcdir)/getopt.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/getopt.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/getopt.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/getopt.c $(OUTPUT_OPTION)

./getopt1.$(objext): $(srcdir)/getopt1.c config.h $(INCDIR)/getopt.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/getopt1.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/getopt1.c $(OUTPUT_OPTION)

./getpagesize.$(objext): $(srcdir)/getpagesize.c config.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/getpagesize.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/getpagesize.c $(OUTPUT_OPTION)

./getpwd.$(objext): $(srcdir)/getpwd.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/libiberty.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/getpwd.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/getpwd.c $(OUTPUT_OPTION)

./getruntime.$(objext): $(srcdir)/getruntime.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/libiberty.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/getruntime.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/getruntime.c $(OUTPUT_OPTION)

./gettimeofday.$(objext): $(srcdir)/gettimeofday.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/libiberty.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/gettimeofday.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/gettimeofday.c $(OUTPUT_OPTION)

./hashtab.$(objext): $(srcdir)/hashtab.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/hashtab.h $(INCDIR)/libiberty.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/hashtab.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/hashtab.c $(OUTPUT_OPTION)

./hex.$(objext): $(srcdir)/hex.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/libiberty.h $(INCDIR)/safe-ctype.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/hex.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/hex.c $(OUTPUT_OPTION)

./index.$(objext): $(srcdir)/index.c

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/index.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/index.c $(OUTPUT_OPTION)

./insque.$(objext): $(srcdir)/insque.c

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/insque.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/insque.c $(OUTPUT_OPTION)

./lbasename.$(objext): $(srcdir)/lbasename.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/filenames.h $(INCDIR)/libiberty.h \

        $(INCDIR)/safe-ctype.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/lbasename.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/lbasename.c $(OUTPUT_OPTION)

./lrealpath.$(objext): $(srcdir)/lrealpath.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/libiberty.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/lrealpath.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/lrealpath.c $(OUTPUT_OPTION)

./make-relative-prefix.$(objext): $(srcdir)/make-relative-prefix.c config.h \

        $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/make-relative-prefix.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/make-relative-prefix.c $(OUTPUT_OPTION)

./make-temp-file.$(objext): $(srcdir)/make-temp-file.c config.h \

        $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/make-temp-file.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/make-temp-file.c $(OUTPUT_OPTION)

./md5.$(objext): $(srcdir)/md5.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/md5.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/md5.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/md5.c $(OUTPUT_OPTION)

./memchr.$(objext): $(srcdir)/memchr.c $(INCDIR)/ansidecl.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/memchr.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/memchr.c $(OUTPUT_OPTION)

./memcmp.$(objext): $(srcdir)/memcmp.c $(INCDIR)/ansidecl.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/memcmp.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/memcmp.c $(OUTPUT_OPTION)

./memcpy.$(objext): $(srcdir)/memcpy.c $(INCDIR)/ansidecl.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/memcpy.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/memcpy.c $(OUTPUT_OPTION)

./memmem.$(objext): $(srcdir)/memmem.c config.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/memmem.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/memmem.c $(OUTPUT_OPTION)

./memmove.$(objext): $(srcdir)/memmove.c $(INCDIR)/ansidecl.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/memmove.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/memmove.c $(OUTPUT_OPTION)

./mempcpy.$(objext): $(srcdir)/mempcpy.c $(INCDIR)/ansidecl.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/mempcpy.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/mempcpy.c $(OUTPUT_OPTION)

./memset.$(objext): $(srcdir)/memset.c $(INCDIR)/ansidecl.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/memset.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/memset.c $(OUTPUT_OPTION)

./mkstemps.$(objext): $(srcdir)/mkstemps.c config.h $(INCDIR)/ansidecl.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/mkstemps.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/mkstemps.c $(OUTPUT_OPTION)

./msdos.$(objext): $(srcdir)/msdos.c

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/msdos.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/msdos.c $(OUTPUT_OPTION)

./objalloc.$(objext): $(srcdir)/objalloc.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/objalloc.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/objalloc.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/objalloc.c $(OUTPUT_OPTION)

./obstack.$(objext): $(srcdir)/obstack.c config.h $(INCDIR)/obstack.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/obstack.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/obstack.c $(OUTPUT_OPTION)

./partition.$(objext): $(srcdir)/partition.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/libiberty.h $(INCDIR)/partition.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/partition.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/partition.c $(OUTPUT_OPTION)

./pex-common.$(objext): $(srcdir)/pex-common.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/libiberty.h $(srcdir)/pex-common.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-common.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/pex-common.c $(OUTPUT_OPTION)

./pex-djgpp.$(objext): $(srcdir)/pex-djgpp.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/libiberty.h $(srcdir)/pex-common.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-djgpp.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/pex-djgpp.c $(OUTPUT_OPTION)

./pex-msdos.$(objext): $(srcdir)/pex-msdos.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/libiberty.h $(srcdir)/pex-common.h \

        $(INCDIR)/safe-ctype.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-msdos.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/pex-msdos.c $(OUTPUT_OPTION)

./pex-one.$(objext): $(srcdir)/pex-one.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/libiberty.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-one.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/pex-one.c $(OUTPUT_OPTION)

./pex-unix.$(objext): $(srcdir)/pex-unix.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/libiberty.h $(srcdir)/pex-common.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-unix.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/pex-unix.c $(OUTPUT_OPTION)

./pex-win32.$(objext): $(srcdir)/pex-win32.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/libiberty.h $(srcdir)/pex-common.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-win32.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/pex-win32.c $(OUTPUT_OPTION)

./pexecute.$(objext): $(srcdir)/pexecute.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/libiberty.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/pexecute.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/pexecute.c $(OUTPUT_OPTION)

./physmem.$(objext): $(srcdir)/physmem.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/libiberty.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/physmem.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/physmem.c $(OUTPUT_OPTION)

./putenv.$(objext): $(srcdir)/putenv.c config.h $(INCDIR)/ansidecl.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/putenv.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/putenv.c $(OUTPUT_OPTION)

./random.$(objext): $(srcdir)/random.c $(INCDIR)/ansidecl.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/random.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/random.c $(OUTPUT_OPTION)

./regex.$(objext): $(srcdir)/regex.c config.h $(INCDIR)/ansidecl.h \

        $(INCDIR)/xregex.h $(INCDIR)/xregex2.h

        if [ x"$(PICFLAG)" != x ]; then \

          $(COMPILE.c) $(PICFLAG) $(srcdir)/regex.c -o pic/$@; \

        else true; fi

        $(COMPILE.c) $(srcdir)/regex.c $(OUTPUT_OPTION)

./rename.$(objext): $(srcdir)/rename.c config.h $(INCDIR)/ansidecl.h

        if [ x"$(PICFLAG)" != x ]; then \