Subversion Repositories open8_urisc

2004-12-23  Tomer Levi  

        * crx-opc.c: Mark 'bcop' instruction as RELAXABLE.

2004-12-14  Svein E. Seldal  

        * avr-dis.c: Prettyprint. Added printing of symbol names in all

        memory references. Convert avr_operand() to C90 formatting.

2004-12-05  Tomer Levi  

        * crx-dis.c (print_arg): Use 'info->print_address_func' for address printing.

2004-11-29  Tomer Levi  

        * crx-opc.c (crx_optab): Mark all rbase_disps* operands as signed.

        (no_op_insn): Initialize array with instructions that have no

        operands.

        * crx-dis.c (make_instruction): Get rid of COP_BRANCH_INS operand swapping.

2004-11-29  Richard Earnshaw  

        * arm-dis.c: Correct top-level comment.

2004-11-27  Richard Earnshaw  

        * arm-opc.h (arm_opcode, thumb_opcode): Add extra field for the

        architecuture defining the insn.

        (arm_opcodes, thumb_opcodes): Delete.  Move to ...

        * arm-dis.c (arm_opcodes, thumb_opcodes): Here.  Add architecutre

        field.

        Also include opcode/arm.h.

        * Makefile.am (arm-dis.lo): Update dependency list.

        * Makefile.in: Regenerate.

2004-11-22  Ravi Ramaseshan  

        * opcode/arc-opc.c (insert_base): Modify ls_operand[LS_OFFSET] to

        reflect the change to the short immediate syntax.

2004-11-19  Alan Modra  

        * or32-opc.c (debug): Warning fix.

        * po/POTFILES.in: Regenerate.

        * maxq-dis.c: Formatting.

        (print_insn): Warning fix.

2004-11-17  Daniel Jacobowitz  

        * arm-dis.c (WORD_ADDRESS): Define.

        (print_insn): Use it.  Correct big-endian end-of-section handling.

2004-11-08  Inderpreet Singh   

            Vineet Sharma      

        * maxq-dis.c: New file.

        * disassemble.c (ARCH_maxq): Define.

        (disassembler): Add 'print_insn_maxq_little' for handling maxq

        instructions..

        * configure.in: Add case for bfd_maxq_arch.

        * configure: Regenerate.

        * Makefile.am: Add support for maxq-dis.c

        * Makefile.in: Regenerate.

        * aclocal.m4: Regenerate.

2004-11-05  Tomer Levi  

        * crx-opc.c (crx_optab): Rename 'arg_icr' to 'arg_idxr' for Index register

        mode.

        * crx-dis.c: Likewise.

2004-11-04  Hans-Peter Nilsson  

        Generally, handle CRISv32.

        * cris-dis.c (TRACE_CASE): Define as (disdata->trace_case).

        (struct cris_disasm_data): New type.

        (format_reg, format_hex, cris_constraint, print_flags)

        (get_opcode_entry): Add struct cris_disasm_data * parameter.  All

        callers changed.

        (format_sup_reg, print_insn_crisv32_with_register_prefix)

        (print_insn_crisv32_without_register_prefix)

        (print_insn_crisv10_v32_with_register_prefix)

        (print_insn_crisv10_v32_without_register_prefix)

        (cris_parse_disassembler_options): New functions.

        (bytes_to_skip, cris_spec_reg): Add enum cris_disass_family

        parameter.  All callers changed.

        (get_opcode_entry): Call malloc, not xmalloc.  Return NULL on

        failure.

        (cris_constraint) : New cases.

        (bytes_to_skip): Handle 'Y' and 'N' as 's'.  Skip size is 4 bytes

        for constraint 'n'.

        (print_with_operands) : New case.

        (print_with_operands) 

        : New cases.

        (print_insn_cris_generic): Emit "bcc ." for zero and CRISv32.

        (print_insn_cris_with_register_prefix)

        (print_insn_cris_without_register_prefix): Call

        cris_parse_disassembler_options.

        * cris-opc.c (cris_spec_regs): Mention that this table isn't used

        for CRISv32 and the size of immediate operands.  New v32-only

        entries for bz, pid, srs, wz, exs, eda, dz, ebp, erp, nrp, ccs and

        spc.  Add v32-only 4-byte entries for p2, p3, p5 and p6.  Change

        ccr, ibr, irp to be v0..v10.  Change bar, dccr to be v8..v10.

        Change brp to be v3..v10.

        (cris_support_regs): New vector.

        (cris_opcodes): Update head comment.  New format characters '[',

        ']', space, 'A', 'd', 'N', 'n', 'Q', 'T', 'u', 'U', 'Y'.

        Add new opcodes for v32 and adjust existing opcodes to accommodate

        differences to earlier variants.

        (cris_cond15s): New vector.

2004-11-04 Jan Beulich 

        * i386-dis.c (Eq, Edqw, indirEp, Gdq, I1): Define.

        (indirEb): Remove.

        (Mp): Use f_mode rather than none at all.

        (t_mode, dq_mode, dqw_mode, f_mode, const_1_mode): Define. t_mode

        replaces what previously was x_mode; x_mode now means 128-bit SSE

        operands.

        (dis386): Make far jumps and calls have an 'l' prefix only in AT&T

        mode. movmskpX's, pextrw's, and pmovmskb's first operands are Gdq.

        pinsrw's second operand is Edqw.

        (grps): 1-bit shifts' and rotates' second operands are I1. cmpxchg8b's

        operand is Eq. movntq's and movntdq's first operands are EM. s[gi]dt,

        fldenv, frstor, fsave, fstenv all should also have suffixes in Intel

        mode when an operand size override is present or always suffixing.

        More instructions will need to be added to this group.

        (putop): Handle new macro chars 'C' (short/long suffix selector),

        'I' (Intel mode override for following macro char), and 'J' (for

        adding the 'l' prefix to far branches in AT&T mode). When an

        alternative was specified in the template, honor macro character when

        specified for Intel mode.

        (OP_E): Handle new *_mode values. Correct pointer specifications for

        memory operands. Consolidate output of index register.

        (OP_G): Handle new *_mode values.

        (OP_I): Handle const_1_mode.

        (OP_ESreg, OP_DSreg): Generate pointer specifications. Indicate

        respective opcode prefix bits have been consumed.

        (OP_EM, OP_EX): Provide some default handling for generating pointer

        specifications.

2004-10-28  Tomer Levi  

        * crx-opc.c (REV_COP_INST): New macro, reverse operand order of

        COP_INST macro.

2004-10-27  Tomer Levi  

        * crx-dis.c (enum REG_ARG_TYPE): New, replacing COP_ARG_TYPE.

        (getregliststring): Support HI/LO and user registers.

        * crx-opc.c (crx_instruction): Update data structure according to the

        rearrangement done in CRX opcode header file.

        (crx_regtab):  Likewise.

        (crx_optab):  Likewise.

        (crx_instruction): Reorder load/stor instructions, remove unsupported

        formats.

        support new Co-Processor instruction 'cpi'.

2004-10-27  Nick Clifton  

        * opcodes/iq2000-asm.c: Regenerate.

        * opcodes/iq2000-desc.c: Regenerate.

        * opcodes/iq2000-desc.h: Regenerate.

        * opcodes/iq2000-dis.c: Regenerate.

        * opcodes/iq2000-ibld.c: Regenerate.

        * opcodes/iq2000-opc.c: Regenerate.

        * opcodes/iq2000-opc.h: Regenerate.

2004-10-21  Tomer Levi  

        * crx-opc.c (crx_instruction): Replace i3, i4, i5 with us3,

        us4, us5 (respectively).

        Remove unsupported 'popa' instruction.

        Reverse operands order in store co-processor instructions.

2004-10-15  Alan Modra  

        * Makefile.am: Run "make dep-am"

        * Makefile.in: Regenerate.

2004-10-12  Bob Wilson  

        * xtensa-dis.c: Use ISO C90 formatting.

2004-10-09  Alan Modra  

        * ppc-opc.c: Revert 2004-09-09 change.

2004-10-07  Bob Wilson  

        * xtensa-dis.c (state_names): Delete.

        (fetch_data): Use xtensa_isa_maxlength.

        (print_xtensa_operand): Replace operand parameter with opcode/operand

        pair.  Remove print_sr_name parameter.  Use new xtensa-isa.h functions.

        (print_insn_xtensa): Use new xtensa-isa.h functions.  Handle multislot

        instruction bundles.  Use xmalloc instead of malloc.

2004-10-07  David Gibson  

        * ppc-opc.c: Replace literal "0"s with NULLs in pointer

        initializers.

2004-10-07  Tomer Levi  

        * crx-opc.c (crx_instruction): Support Co-processor insns.

        * crx-dis.c (COP_ARG_TYPE): New enum for CO-Processor arguments.

        (getregliststring): Change function to use the above enum.

        (print_arg): Handle CO-Processor insns.

        (crx_cinvs): Add 'b' option to invalidate the branch-target

        cache.

2004-10-06  Aldy Hernandez  

        * ppc-opc.c (powerpc_opcodes): Add efscfd, efdabs, efdnabs,

        efdneg, efdadd, efdsub, efdmul, efddiv, efdcmpgt, efdcmplt,

        efdcmpeq, efdtstgt, efdtstlt, efdtsteq, efdcfsi, efdcfsid,

        efdcfui, efdcfuid, efdcfsf, efdcfuf, efdctsi, efdctsidz, efdctsiz,

        efdctui, efdctuidz, efdctuiz, efdctsf, efdctuf, efdctuf, efdcfs.

2004-10-01  Bill Farmer  

        * pdp11-dis.c (print_insn_pdp11): Subtract the SOB's displacement

        rather than add it.

2004-09-30  Paul Brook  

        * arm-dis.c (print_insn_arm): Handle 'e' for SMI instruction.

        * arm-opc.h: Document %e.  Add ARMv6ZK instructions.

2004-09-17  H.J. Lu  

        * Makefile.am (AUTOMAKE_OPTIONS): Require 1.9.

        (CONFIG_STATUS_DEPENDENCIES): New.

        (Makefile): Removed.

        (config.status): Likewise.

        * Makefile.in: Regenerated.

2004-09-17  Alan Modra  

        * Makefile.am: Run "make dep-am".

        * Makefile.in: Regenerate.

        * aclocal.m4: Regenerate.

        * configure: Regenerate.

        * po/POTFILES.in: Regenerate.

        * po/opcodes.pot: Regenerate.

2004-09-11  Andreas Schwab  

        * configure: Rebuild.

2004-09-09  Segher Boessenkool  

        * ppc-opc.c (L): Make this field not optional.

2004-09-03  Tomer Levi  

        * opc-crx.c: Rename 'popma' to 'popa', remove 'pushma'.

        Fix parameter to 'm[t|f]csr' insns.

2004-08-30  Nathanael Nerode  

        * configure.in: Autoupdate to autoconf 2.59.

        * aclocal.m4: Rebuild with aclocal 1.4p6.

        * configure: Rebuild with autoconf 2.59.

        * Makefile.in: Rebuild with automake 1.4p6 (picking up

        bfd changes for autoconf 2.59 on the way).

        * config.in: Rebuild with autoheader 2.59.

2004-08-27  Richard Sandiford  

        * frv-desc.[ch], frv-opc.[ch]: Regenerated.

2004-07-30  Michal Ludvig  

        * i386-dis.c (GRPPADLCK): Renamed to GRPPADLCK1

        (GRPPADLCK2): New define.

        (twobyte_has_modrm): True for 0xA6.

        (grps): GRPPADLCK2 for opcode 0xA6.

2004-07-29  Alexandre Oliva  

        Introduce SH2a support.

        * sh-opc.h (arch_sh2a_base): Renumber.

        (arch_sh2a_nofpu_base): Remove.

        (arch_sh_base_mask): Adjust.

        (arch_opann_mask): New.

        (arch_sh2a, arch_sh2a_nofpu): Adjust.

        (arch_sh2a_up, arch_sh2a_nofpu_up): Likewise.

        (sh_table): Adjust whitespace.

        2004-02-24  Corinna Vinschen  

        * sh-opc.h (arch_sh2a_nofpu_up): New.  Use instead of arch_sh2a_up in

        instruction list throughout.

        (arch_sh2a_up): Redefine to include fpu instruction set.  Use instead

        of arch_sh2a in instruction list throughout.

        (arch_sh2e_up): Accomodate above changes.

        (arch_sh2_up): Ditto.

        2004-02-20  Corinna Vinschen  

        * sh-opc.h: Add arch_sh2a_nofpu to arch_sh2_up.

        2004-02-18  Corinna Vinschen  

        * sh-dis.c (print_insn_sh): Add bfd_mach_sh2a_nofpu handling.

        * sh-opc.h (arch_sh2a_nofpu): New.

        (arch_sh2a_up): New, defines sh2a and sh2a_nofpu.

        (sh_table): Change all arch_sh2a to arch_sh2a_up unless FPU

        instruction.

        2004-01-20  DJ Delorie  

        * sh-dis.c (print_insn_sh): SH2A does not have 'X' fp regs.

        2003-12-29  DJ Delorie  

        * sh-opc.c (sh_nibble_type, sh_arg_type, arch_2a, arch_2e_up,

        sh_opcode_info, sh_table): Add sh2a support.

        (arch_op32): New, to tag 32-bit opcodes.

        * sh-dis.c (print_insn_sh): Support sh2a opcodes.

        2003-12-02  Michael Snyder  

        * sh-opc.h (arch_sh2a): Add.

        * sh-dis.c (arch_sh2a): Handle.

        * sh-opc.h (arch_sh2_up): Fix up to include arch_sh2a.

2004-07-27  Tomer Levi  

        * crx-opc.c: Add popx,pushx insns. Indent code, fix comments.

2004-07-22  Nick Clifton  

        PR/280

        * h8300-dis.c (bfd_h8_disassemble): Do not dump raw bytes for the

        insns - this is done by objdump itself.

        * h8500-dis.c (print_insn_h8500): Likewise.

2004-07-21  Jan Beulich 

        * i386-dis.c (OP_E): Show rip-relative addressing in 64-bit mode

        regardless of address size prefix in effect.

        (ptr_reg): Size or address registers does not depend on rex64, but

        on the presence of an address size override.

        (OP_MMX): Use rex.x only for xmm registers.

        (OP_EM): Use rex.z only for xmm registers.

2004-07-20  Maciej W. Rozycki  

        * mips-opc.c (mips_builtin_opcodes): Move coprocessor 2

        move/branch operations to the bottom so that VR5400 multimedia

        instructions take precedence in disassembly.

2004-07-20  Maciej W. Rozycki  

        * mips-opc.c (mips_builtin_opcodes): Remove the MIPS32

        ISA-specific "break" encoding.

2004-07-13  Elvis Chiang  

        * arm-opc.h: Fix typo in comment.

2004-07-11  Andreas Schwab  

        * m68k-dis.c (m68k_valid_ea): Fix typos in last change.

2004-07-09  Andreas Schwab  

        * m68k-dis.c (m68k_valid_ea): Check validity of all codes.

2004-07-07  Tomer Levi  

        * Makefile.am (CFILES): Add crx-dis.c, crx-opc.c.

        (ALL_MACHINES): Add crx-dis.lo, crx-opc.lo.

        (crx-dis.lo): New target.

        (crx-opc.lo): Likewise.

        * Makefile.in: Regenerate.

        * configure.in: Handle bfd_crx_arch.

        * configure: Regenerate.

        * crx-dis.c: New file.

        * crx-opc.c: New file.

        * disassemble.c (ARCH_crx): Define.

        (disassembler): Handle ARCH_crx.

2004-06-29  James E Wilson  

        * ia64-opc-a.c (ia64_opcodes_a): Delete mov immediate pseudo for adds.

        * ia64-asmtab.c: Regnerate.

2004-06-28  Alan Modra  

        * ppc-opc.c (insert_fxm): Handle mfocrf and mtocrf.

        (extract_fxm): Don't test dialect.

        (XFXFXM_MASK): Include the power4 bit.

        (XFXM): Add p4 param.

        (powerpc_opcodes): Add mfocrf and mtocrf.  Adjust mtcr.

2004-06-27  Alexandre Oliva  

        2003-07-21  Richard Sandiford  

        * disassemble.c (disassembler): Handle bfd_mach_h8300sxn.

2004-06-26  Alan Modra  

        * ppc-opc.c (BH, XLBH_MASK): Define.

        (powerpc_opcodes): Allow BH field on bclr, bclrl, bcctr, bcctrl.

2004-06-24  Alan Modra  

        * i386-dis.c (x_mode): Comment.

        (two_source_ops): File scope.

        (float_mem): Correct fisttpll and fistpll.

        (float_mem_mode): New table.

        (dofloat): Use it.

        (OP_E): Correct intel mode PTR output.

        (ptr_reg): Use open_char and close_char.

        (PNI_Fixup): Handle possible suffix on sidt.  Use op1out etc. for

        operands.  Set two_source_ops.

2004-06-15  Alan Modra  

        * arc-ext.c (build_ARC_extmap): Use bfd_get_section_size

        instead of _raw_size.

2004-06-08  Jakub Jelinek  

        * ia64-gen.c (in_iclass): Handle more postinc st

        and ld variants.

        * ia64-asmtab.c: Rebuilt.

2004-06-01  Martin Schwidefsky  

        * s390-opc.txt: Correct architecture mask for some opcodes.

        lrv, lrvh, strv, ml, dl, alc, slb rll and mvclu are available

        in the esa mode as well.

2004-05-28  Andrew Stubbs 

        * sh-dis.c (target_arch): Make unsigned.

        (print_insn_sh): Replace (most of) switch with a call to

        sh_get_arch_from_bfd_mach(). Also use new architecture flags system.

        * sh-opc.h: Redefine architecture flags values.

        Add sh3-nommu architecture.

        Reorganise _up macros so they make more visual sense.

        (SH_MERGE_ARCH_SET): Define new macro.

        (SH_VALID_BASE_ARCH_SET): Likewise.

        (SH_VALID_MMU_ARCH_SET): Likewise.

        (SH_VALID_CO_ARCH_SET): Likewise.

        (SH_VALID_ARCH_SET): Likewise.

        (SH_MERGE_ARCH_SET_VALID): Likewise.

        (SH_ARCH_SET_HAS_FPU): Likewise.

        (SH_ARCH_SET_HAS_DSP): Likewise.

        (SH_ARCH_UNKNOWN_ARCH): Likewise.

        (sh_get_arch_from_bfd_mach): Add prototype.

        (sh_get_arch_up_from_bfd_mach): Likewise.

        (sh_get_bfd_mach_from_arch_set): Likewise.

        (sh_merge_bfd_arc): Likewise.

2004-05-24  Peter Barada  

        * m68k-dis.c(print_insn_m68k): Strip body of diassembly out

        into new match_insn_m68k function.  Loop over canidate

        matches and select first that completely matches.

        * m68k-dis.c(print_insn_arg): Fix 'g' case to only extract 1 bit.

        * m68k-dis.c(print_insn_arg): Call new function m68k_valid_ea

        to verify addressing for MAC/EMAC.

        * m68k-dis.c(print_insn_arg): Use reg_half_names for MAC/EMAC

        reigster halves since 'fpu' and 'spl' look misleading.

        * m68k-dis.c(fetch_arg): Fix 'G', 'H', 'I', 'f', 'M', 'N' cases.

        * m68k-opc.c: Rearragne mac/emac cases to use longest for

        first, tighten up match masks.

        * m68k-opc.c: Add 'size' field to struct m68k_opcode.  Produce

        'size' from special case code in print_insn_m68k to

        determine decode size of insns.

2004-05-19  Alan Modra  

        * ppc-opc.c (insert_fxm): Enable two operand mfcr when -many as

        well as when -mpower4.

2004-05-13  Nick Clifton  

        * po/fr.po: Updated French translation.

2004-05-05  Peter Barada  

        * m68k-dis.c(print_insn_m68k): Add new chips, use core

        variants in arch_mask.  Only set m68881/68851 for 68k chips.

        * m68k-op.c: Switch from ColdFire chips to core variants.

2004-05-05  Alan Modra  

        PR 147.

        * ppc-opc.c (PPCVEC): Remove PPC_OPCODE_PPC.

2004-04-29  Ben Elliston  

        * ppc-opc.c (XCMPL): Renmame to XOPL. Update users.

        (powerpc_opcodes): Add "dbczl" instruction for PPC970.

2004-04-22  Kaz Kojima  

        * sh-dis.c (print_insn_sh): Print the value in constant pool

        as a symbol if it looks like a symbol.

2004-04-22  Peter Barada 

        * m68k-dis.c(print_insn_m68k): Set mfcmac/mcfemac on

        appropriate ColdFire architectures.

        (print_insn_m68k): Handle EMAC, MAC/EMAC scalefactor, and MAC/EMAC

        mask addressing.

        Add EMAC instructions, fix MAC instructions. Remove

        macmw/macml/msacmw/msacml instructions since mask addressing now

        supported.

2004-04-20  Jakub Jelinek  

        * sparc-opc.c (fmoviccx, fmovfccx, fmovccx): Define.

        (fmovicc, fmovfcc, fmovcc): Remove fpsize argument, change opcode to

        suffix.  Use fmov*x macros, create all 3 fpsize variants in one

        macro.  Adjust all users.

2004-04-15  Anil Paranjpe  

        * h8300-dis.c (bfd_h8_disassemble) : Treat "adds" & "subs"

        separately.

2004-03-30  Kazuhiro Inaoka  

        * m32r-asm.c: Regenerate.

2004-03-29  Stan Shebs  

        * mpw-config.in, mpw-make.sed: Remove MPW support files, no longer

        used.

2004-03-19  Alan Modra  

        * aclocal.m4: Regenerate.

        * config.in: Regenerate.

        * configure: Regenerate.

        * po/POTFILES.in: Regenerate.

        * po/opcodes.pot: Regenerate.

2004-03-16  Alan Modra  

        * ppc-dis.c (print_insn_powerpc): Don't print tabs.  Handle

        PPC_OPERANDS_GPR_0.

        * ppc-opc.c (RA0): Define.

        (RAQ, RAL, RAM, RAS, RSQ, RTQ, RSO): Use PPC_OPERAND_GPR_0.

        (RAOPT): Rename from RAO.  Update all uses.

        (powerpc_opcodes): Use RA0 as appropriate.

2004-03-15  Aldy Hernandez  

        * ppc-opc.c (powerpc_opcodes): Add BOOKE versions of mfsprg.

2004-03-15  Alan Modra  

        * sparc-dis.c (print_insn_sparc): Update getword prototype.

2004-03-12  Michal Ludvig  

        * i386-dis.c (GRPPLOCK): Delete.

        (grps): Delete GRPPLOCK entry.

2004-03-12  Alan Modra  

        * i386-dis.c (OP_M, OP_0f0e, OP_0fae, NOP_Fixup): New functions.

        (M, Mp): Use OP_M.

        (None, PADLOCK_SPECIAL, PADLOCK_0): Delete.

        (GRPPADLCK): Define.

        (dis386): Use NOP_Fixup on "nop".

        (dis386_twobyte): Use GRPPADLCK on opcode 0xa7.

        (twobyte_has_modrm): Set for 0xa7.

        (padlock_table): Delete.  Move to..

        (grps): ..here, using OP_0f07.  Use OP_Ofae on lfence, mfence

        and clflush.

        (print_insn): Revert PADLOCK_SPECIAL code.

        (OP_E): Delete sfence, lfence, mfence checks.

2004-03-12  Jakub Jelinek  

        * i386-dis.c (grps): Use INVLPG_Fixup instead of OP_E for invlpg.

        (INVLPG_Fixup): New function.

        (PNI_Fixup): Remove ATTRIBUTE_UNUSED from sizeflag.

2004-03-12  Michal Ludvig  

        * i386-dis.c (PADLOCK_SPECIAL, PADLOCK_0): New defines.

        (dis386_twobyte): Opcode 0xa7 is PADLOCK_0.

        (padlock_table): New struct with PadLock instructions.

        (print_insn): Handle PADLOCK_SPECIAL.

2004-03-12  Alan Modra  

        * i386-dis.c (grps): Use clflush by default for 0x0fae/7.

        (OP_E): Twiddle clflush to sfence here.

2004-03-08  Nick Clifton  

        * po/de.po: Updated German translation.

2003-03-03  Andrew Stubbs  

        * sh-dis.c (print_insn_sh): Don't disassemble fp instructions in

        nofpu mode.  Add BFD type bfd_mach_sh4_nommu_nofpu.

        * sh-opc.h: Add sh4_nommu_nofpu architecture and adjust instructions

        accordingly.

2004-03-01  Richard Sandiford  

        * frv-asm.c: Regenerate.

        * frv-desc.c: Regenerate.

        * frv-desc.h: Regenerate.

        * frv-dis.c: Regenerate.

        * frv-ibld.c: Regenerate.

        * frv-opc.c: Regenerate.

        * frv-opc.h: Regenerate.

2004-03-01  Richard Sandiford  

        * frv-desc.c, frv-opc.c: Regenerate.

2004-03-01  Richard Sandiford  

        * frv-desc.c, frv-opc.c, frv-opc.h: Regenerate.

2004-02-26  Andrew Stubbs  

        * sh-opc.h: Move fsca and fsrra instructions from sh4a to sh4.

        Also correct mistake in the comment.

2004-02-26  Andrew Stubbs 

        * sh-dis.c (print_insn_sh): Add REG_N_D nibble type to

        ensure that double registers have even numbers.

        Add REG_N_B01 for nn01 (binary 01) nibble to ensure

        that reserved instruction 0xfffd does not decode the same

        as 0xfdfd (ftrv).

        * sh-opc.h: Add REG_N_D nibble type and use it whereever

        REG_N refers to a double register.

        Add REG_N_B01 nibble type and use it instead of REG_NM

        in ftrv.

        Adjust the bit patterns in a few comments.

2004-02-25  Aldy Hernandez  

        * ppc-opc.c (powerpc_opcodes): Change mask for dcbt and dcbtst.

2004-02-20  Aldy Hernandez  

        * ppc-opc.c (powerpc_opcodes): Move mfmcsrr0 before mfdc_dat.

2004-02-20  Aldy Hernandez  

        * ppc-opc.c (powerpc_opcodes): Add m*ivor35.

2004-02-20  Aldy Hernandez  

        * ppc-opc.c (powerpc_opcodes): Add mfivor32, mfivor33, mfivor34,

        mtivor32, mtivor33, mtivor34.

2004-02-19  Aldy Hernandez  

        * ppc-opc.c (powerpc_opcodes): Add mfmcar.

2004-02-10  Petko Manolov  

        * arm-opc.h Maverick accumulator register opcode fixes.

2004-02-13  Ben Elliston  

        * m32r-dis.c: Regenerate.

2004-01-27  Michael Snyder  

        * sh-opc.h (sh_table): "fsrra", not "fssra".

2004-01-23  Andrew Over 

        * sparc-opc.c (fdtox, fstox, fqtox, fxtod, fxtos, fxtoq): Tighten

        contraints.

2004-01-19  Andrew Over  

        * sparc-opc.c (sparc_opcodes) : Fix args.

2004-01-19  Alan Modra  

        * i386-dis.c (OP_E): Print scale factor on intel mode sib when not

        1.  Don't print scale factor on AT&T mode when index missing.

2004-01-16  Alexandre Oliva  

        * m10300-opc.c (mov): 8- and 24-bit immediates are zero-extended

        when loaded into XR registers.

2004-01-14  Richard Sandiford  

        * frv-desc.h: Regenerate.

        * frv-desc.c: Regenerate.

        * frv-opc.c: Regenerate.

2004-01-13  Michael Snyder  

        * sh-dis.c (print_insn_sh): Allocate 4 bytes for insn.

2004-01-09  Paul Brook  

        * arm-opc.h (arm_opcodes): Move generic mcrr after known

        specific opcodes.

2004-01-07  Daniel Jacobowitz  

        * Makefile.am (libopcodes_la_DEPENDENCIES)

        (libopcodes_la_LIBADD): Revert 2003-05-17 change.  Add explanatory

        comment about the problem.

        * Makefile.in: Regenerate.

2004-01-06  Alexandre Oliva  

        2003-12-19  Alexandre Oliva  

        * frv-asm.c (parse_ulo16, parse_uhi16, parse_d12): Fix some

        cut&paste errors in shifting/truncating numerical operands.

        2003-08-04  Alexandre Oliva  

        * frv-asm.c (parse_ulo16): Parse gotofflo and gotofffuncdesclo.

        (parse_uslo16): Likewise.

        (parse_uhi16): Parse gotoffhi and gotofffuncdeschi.

        (parse_d12): Parse gotoff12 and gotofffuncdesc12.

        (parse_s12): Likewise.

        2003-08-04  Alexandre Oliva  

        * frv-asm.c (parse_ulo16): Parse gotlo and gotfuncdesclo.

        (parse_uslo16): Likewise.

        (parse_uhi16): Parse gothi and gotfuncdeschi.

        (parse_d12): Parse got12 and gotfuncdesc12.

        (parse_s12): Likewise.

2004-01-02  Albert Bartoszko  

        * msp430-dis.c (msp430_doubleoperand): Check for an 'add'

        instruction which looks similar to an 'rla' instruction.

For older changes see ChangeLog-0203

Local Variables:

mode: change-log

left-margin: 8

fill-column: 74

version-control: never

End: