Subversion Repositories openarty

################################################################################

##

## Filename:    Makefile

##

## Project:     OpenArty, an entirely open SoC based upon the Arty platform

##

## Purpose:

## Targets:

##

## Creator:     Dan Gisselquist, Ph.D.

##              Gisselquist Technology, LLC

##

################################################################################

##

## Copyright (C) 2015-2016, Gisselquist Technology, LLC

##

## This program is free software (firmware): you can redistribute it and/or

## modify it under the terms of  the GNU General Public License as published

## by the Free Software Foundation, either version 3 of the License, or (at

## your option) any later version.

##

## This program is distributed in the hope that it will be useful, but WITHOUT

## ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or

## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

## for more details.

##

## You should have received a copy of the GNU General Public License along

## with this program.  (It's in the $(ROOT)/doc directory, run make with no

## target there if the PDF file isn't present.)  If not, see

##  for a copy.

##

## License:     GPL, v3, as defined and found on www.gnu.org,

##              http://www.gnu.org/licenses/gpl.html

##

##

################################################################################

##

##

.PHONY: all

PROGRAMS := wbregs netuart wbsettime wbprogram netsetup manping \

        zipload zipstate zipdbg divutb

SCOPES := eqspiscope etxscope erxscope cpuscope

all: $(PROGRAMS) $(SCOPES) gps

CXX := g++

OBJDIR := obj-pc

BUSSRCS := ttybus.cpp llcomms.cpp regdefs.cpp byteswap.cpp

SOURCES := wbregs.cpp wbprogram.cpp netuart.cpp wbsettime.cpp           \

        dumpflash.cpp eqspiscope.cpp flashdrvr.cpp                      \

        scopecls.cpp sdramscope.cpp                                     \

        zipload.cpp zipstate.cpp zipdbg.cpp             \

        erxscope.cpp etxscope.cpp netsetup.cpp cpuscope.cpp             \

         mdioscope.cpp manping.cpp $(BUSSRCS)

        # ziprun.cpp cfgscope.cpp

HEADERS := llcomms.h ttybus.h devbus.h

OBJECTS := $(addprefix $(OBJDIR)/,$(subst .cpp,.o,$(SOURCES)))

BUSOBJS := $(addprefix $(OBJDIR)/,$(subst .cpp,.o,$(BUSSRCS)))

CFLAGS := -g -Wall -I.

LIBS :=

SUBMAKE := $(MAKE) --no-print-directory

%.o: $(OBJDIR)/%.o

$(OBJDIR)/%.o: %.cpp

        $(CXX) $(CFLAGS) -c $< -o $@

$(OBJDIR)/%.o: %.c

        $(CXX) $(CFLAGS) -c $< -o $@

.PHONY: gps

gps: $(BUSOBJS) $(OBJDIR)/scopecls.o

        @bash -c "if [[ -e gps/Makefile ]]; then $(SUBMAKE) --directory=gps; fi"

$(OBJDIR)/hsnetuart.o: netuart.cpp

        $(CXX) $(CFLAGS) -c -DHIGH_SPEED $< -o $@

.PHONY: clean

clean:

        rm -rf $(OBJDIR)/ $(PROGRAMS) a.out

$(OBJDIR)/scopecls.o: scopecls.cpp scopecls.h $(OBJDIR)/

$(OBJDIR)/eqspiscope.o: eqspiscope.cpp scopecls.h $(OBJDIR)/

$(OBJDIR)/dumpflash.o: dumpflash.cpp regdefs.h $(OBJDIR)/

netuart: $(OBJDIR)/netuart.o

        $(CXX) $(CFLAGS) $^ -o $@

hsnetuart: $(OBJDIR)/hsnetuart.o

        $(CXX) $(CFLAGS) $^ -o $@

#

# Some simple programs that just depend upon the ability to talk to the FPGA,

# and little more.

wbsettime: $(OBJDIR)/wbsettime.o $(BUSOBJS)

        $(CXX) $(CFLAGS) $^ -o $@

mtest: $(OBJDIR)/mtest.o $(BUSOBJS)

        $(CXX) $(CFLAGS) $^ -o $@

manping: $(OBJDIR)/manping.o $(BUSOBJS)

        $(CXX) $(CFLAGS) $^ -o $@

zipstate: $(OBJDIR)/zipstate.o $(BUSOBJS)

        $(CXX) $(CFLAGS) $^ $(LIBS) -o $@

netsetup: $(OBJDIR)/netsetup.o $(BUSOBJS)

        $(CXX) $(CFLAGS) $^ $(LIBS) -o $@

wbregs: $(OBJDIR)/wbregs.o $(BUSOBJS)

        $(CXX) $(CFLAGS) $^ $(LIBS) -o $@

dumpflash: $(OBJDIR)/dumpflash.o $(BUSOBJS)

        $(CXX) $(CFLAGS) $^ $(LIBS) -o $@

divutb: $(OBJDIR)/divutb.o

        $(CXX) $(CFLAGS) $^ -o $@

#

# Programs that depend upon not just the bus objects, but the flash driver

# as well.

wbprogram: $(OBJDIR)/wbprogram.o $(OBJDIR)/flashdrvr.o $(BUSOBJS)

        $(CXX) -g $^ -o $@

zipload: $(OBJDIR)/zipload.o $(OBJDIR)/flashdrvr.o $(BUSOBJS) $(OBJDIR)/zipelf.o

        $(CXX) -g $^ -lelf -o $@

## SCOPES

# These depend upon the scopecls.o, the bus objects, as well as their

# main file(s).

eqspiscope: $(OBJDIR)/eqspiscope.o $(OBJDIR)/scopecls.o $(BUSOBJS)

        $(CXX) -g $^ -o $@

sdramscope: $(OBJDIR)/sdramscope.o $(OBJDIR)/scopecls.o $(BUSOBJS)

        $(CXX) -g $^ -o $@

cfgscope: $(OBJDIR)/cfgscope.o $(OBJDIR)/scopecls.o $(BUSOBJS)

        $(CXX) -g $^ -o $@

cpuscope: $(OBJDIR)/cpuscope.o $(OBJDIR)/scopecls.o $(BUSOBJS)

        $(CXX) -g $^ -o $@

erxscope: $(OBJDIR)/erxscope.o $(OBJDIR)/scopecls.o $(BUSOBJS)

        $(CXX) -g $^ -o $@

etxscope: $(OBJDIR)/etxscope.o $(OBJDIR)/scopecls.o $(BUSOBJS)

        $(CXX) -g $^ -o $@

mdioscope: $(OBJDIR)/mdioscope.o $(OBJDIR)/scopecls.o $(BUSOBJS)

        $(CXX) -g $^ -o $@

wbuscope: $(OBJDIR)/wbuscope.o $(OBJDIR)/scopecls.o $(BUSOBJS)

        $(CXX) -g $^ -o $@

#

DBGSRCS  := zopcodes.cpp twoc.cpp

DBGOBJS := $(addprefix $(OBJDIR)/,$(subst .cpp,.o,$(DBGSRCS)))

zipdbg: $(OBJDIR)/zipdbg.o $(BUSOBJS) $(DBGOBJS)

        $(CXX) -g $^ -lcurses -o $@

define  build-depends

        @echo "Building dependency file(s)"

        @bash -c "if [ ! -e $(OBJDIR) ]; then mkdir -p $(OBJDIR)/; fi"

        $(CXX) $(CPPFLAGS) -MM $(SOURCES) > $(OBJDIR)/xdepends.txt

        @sed -e 's/^.*.o: /$(OBJDIR)\/&/' < $(OBJDIR)/xdepends.txt > $(OBJDIR)/depends.txt

        @rm $(OBJDIR)/xdepends.txt

endef

tags: $(SOURCES) $(HEADERS)

        @echo "Generating tags"

        @ctags $(SOURCES) $(HEADERS)

.PHONY: depends

depends: tags

        $(build-depends)

$(OBJDIR)/depends.txt: $(SOURCES) $(HEADERS)

        $(build-depends)

$(OBJDIR)/:

        @bash -c "if [ ! -e $(OBJDIR) ]; then mkdir -p $(OBJDIR)/; fi"

-include $(OBJDIR)/depends.txt