Subversion Repositories openarty

////////////////////////////////////////////////////////////////////////////////

//

// Filename:    regdefs.h

//

// Project:     OpenArty, an entirely open SoC based upon the Arty platform

//

// Purpose:     

//

// Creator:     Dan Gisselquist, Ph.D.

//              Gisselquist Technology, LLC

//

////////////////////////////////////////////////////////////////////////////////

//

// Copyright (C) 2015-2016, Gisselquist Technology, LLC

//

// This program is free software (firmware): you can redistribute it and/or

// modify it under the terms of  the GNU General Public License as published

// by the Free Software Foundation, either version 3 of the License, or (at

// your option) any later version.

//

// This program is distributed in the hope that it will be useful, but WITHOUT

// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or

// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

// for more details.

//

// You should have received a copy of the GNU General Public License along

// with this program.  (It's in the $(ROOT)/doc directory, run make with no

// target there if the PDF file isn't present.)  If not, see

// <http://www.gnu.org/licenses/> for a copy.

//

// License:     GPL, v3, as defined and found on www.gnu.org,

//              http://www.gnu.org/licenses/gpl.html

//

//

////////////////////////////////////////////////////////////////////////////////

//

//

#ifndef REGDEFS_H

#define REGDEFS_H

#define R_VERSION       0x00000100

#define R_ICONTROL      0x00000101

#define R_BUSERR        0x00000102

#define R_PWCOUNT       0x00000103

#define R_BTNSW         0x00000104

#define R_LEDS          0x00000105

#define R_UART_SETUP    0x00000106

#define R_GPS_SETUP     0x00000107

#define R_CLR0          0x00000108

#define R_CLR1          0x00000109

#define R_CLR2          0x0000010a

#define R_CLR3          0x0000010b

#define R_DATE          0x0000010c

#define R_GPIO          0x0000010d      // No GPIO device exists ... yet

#define R_UARTRX        0x0000010e

#define R_UARTTX        0x0000010f

#define R_GPSRX         0x00000110

#define R_GPSTX         0x00000111

// WB Scope registers

#define R_QSCOPE        0x00000120      // Scope #0: Quad SPI scope ctrl

#define R_QSCOPED       0x00000121      //      and data

#define R_CPUSCOPE      0x00000120      // CPU scope (if so configured)

#define R_CPUSCOPED     0x00000121      //      and data

#define R_GPSCOPE       0x00000122      // Scope #1: GPS config scope control

#define R_GPSCOPED      0x00000123      //      and data

#define R_CFGSCOPE      0x00000122      // ICAPE2 configuration scop control

#define R_CFGSCOPED     0x00000123      //      and data

#define R_BUSSCOPE      0x00000122      // WBUBUS scope control

#define R_BUSSCOPED     0x00000123      //      and data

#define R_RAMSCOPE      0x00000124      // Scope #2: DDR3 SDRAM Scope

#define R_RAMSCOPED     0x00000125      //

#define R_NETSCOPE      0x00000126      // Scope #3: Ethernet debug scope

#define R_NETSCOPED     0x00000127      //

// RTC Clock Registers

#define R_CLOCK         0x00000128

#define R_TIMER         0x00000129

#define R_STOPWATCH     0x0000012a

#define R_CKALARM       0x0000012b

// SD Card Control

#define R_SDCARD_CTRL   0x0000012c

#define R_SDCARD_DATA   0x0000012d

#define R_SDCARD_FIFOA  0x0000012e

#define R_SDCARD_FIFOB  0x0000012f

// GPS Loop control, 0x0130

#define R_GPS_ALPHA     0x00000130

#define R_GPS_BETA      0x00000131

#define R_GPS_GAMMA     0x00000132

#define R_GPS_STEP      0x00000133

// OLED

#define R_OLED_CMD      0x00000134

#define R_OLED_CDATA    0x00000135

#define R_OLED_CDATB    0x00000136

#define R_OLED_DATA     0x00000137

// Network packet interface, 0x0184

#define R_NET_RXCMD     0x00000138

#define R_NET_TXCMD     0x00000139

#define R_NET_MACHI     0x0000013a

#define R_NET_MACLO     0x0000013b

#define R_NET_RXMISS    0x0000013c

#define R_NET_RXERR     0x0000013d

#define R_NET_RXCRC     0x0000013e

#define R_NET_TXCOL     0x0000013f

// Unused: 0x13c-0x13f

// GPS Testbench: 0x140-0x147

#define R_GPSTB_FREQ    0x00000140

#define R_GPSTB_JUMP    0x00000141

#define R_GPSTB_ERRHI   0x00000142

#define R_GPSTB_ERRLO   0x00000143

#define R_GPSTB_COUNTHI 0x00000144

#define R_GPSTB_COUNTLO 0x00000145

#define R_GPSTB_STEPHI  0x00000146

#define R_GPSTB_STEPLO  0x00000147

// Unused: 0x148-0x19f

// Ethernet configuration (MDIO) port: 0x1a0-0x1bf

#define R_MDIO_BMCR     0x000001a0

#define R_MDIO_BMSR     0x000001a1

#define R_MDIO_PHYIDR1  0x000001a2

#define R_MDIO_PHYIDR2  0x000001a3

#define R_MDIO_ANAR     0x000001a4

#define R_MDIO_ANLPAR   0x000001a5

// #define      R_MDIO_ANLPARNP 0x000001a5

#define R_MDIO_ANER     0x000001a6

#define R_MDIO_ANNPTR   0x000001a7

#define R_MDIO_PHYSTS   0x000001b0

#define R_MDIO_FCSCR    0x000001b4

#define R_MDIO_RECR     0x000001b5

#define R_MDIO_PCSR     0x000001b6

#define R_MDIO_RBR      0x000001b7

#define R_MDIO_LEDCR    0x000001b8

#define R_MDIO_PHYCR    0x000001b9

#define R_MDIO_BTSCR    0x000001ba

#define R_MDIO_CDCTRL   0x000001bb

#define R_MDIO_EDCR     0x000001bd

// Flash: 0x1c0-0x1df

#define R_QSPI_EREG     0x000001c0

#define R_QSPI_STAT     0x000001c1

#define R_QSPI_NVCONF   0x000001c2

#define R_QSPI_VCONF    0x000001c3

#define R_QSPI_EVCONF   0x000001c4

#define R_QSPI_LOCK     0x000001c5

#define R_QSPI_FLAG     0x000001c6

// #define      R_QSPI_ASYNC    0x000001c7

#define R_QSPI_ID       0x000001c8

#define R_QSPI_IDA      0x000001c9

#define R_QSPI_IDB      0x000001ca

#define R_QSPI_IDC      0x000001cb

#define R_QSPI_IDD      0x000001cc

//

#define R_QSPI_OTPWP    0x000001cf

#define R_QSPI_OTP      0x000001d0

// FPGA CONFIG REGISTERS: 0x1e0-0x1ff

#define R_CFG_CRC       0x000001e0

#define R_CFG_FAR       0x000001e1

#define R_CFG_FDRI      0x000001e2

#define R_CFG_FDRO      0x000001e3

#define R_CFG_CMD       0x000001e4

#define R_CFG_CTL0      0x000001e5

#define R_CFG_MASK      0x000001e6

#define R_CFG_STAT      0x000001e7

#define R_CFG_LOUT      0x000001e8

#define R_CFG_COR0      0x000001e9

#define R_CFG_MFWR      0x000001ea

#define R_CFG_CBC       0x000001eb

#define R_CFG_IDCODE    0x000001ec

#define R_CFG_AXSS      0x000001ed

#define R_CFG_COR1      0x000001ee

#define R_CFG_WBSTAR    0x000001f0

#define R_CFG_TIMER     0x000001f1

#define R_CFG_BOOTSTS   0x000001f6

#define R_CFG_CTL1      0x000001f8

#define R_CFG_BSPI      0x000001ff

// Network buffer space

#define R_NET_RXBUF     0x00000800

#define R_NET_TXBUF     0x00000c00

// Block RAM memory space

#define MEMBASE         0x00008000

#define MEMWORDS        0x00008000

// Flash memory space

#define EQSPIFLASH      0x00400000

#define RESET_ADDRESS   0x004e0000

#define FLASHWORDS      (1<<22)

// DDR3 SDRAM memory space

#define RAMBASE         0x04000000

#define SDRAMBASE       RAMBASE

#define RAMWORDS        (1<<26)

// Zip CPU Control and Debug registers

#define R_ZIPCTRL       0x08000000

#define R_ZIPDATA       0x08000001

// Interrupt control constants

#define GIE             0x80000000      // Enable all interrupts

#define ISPIF_EN        0x82000200      // Enable all, enable QSPI, clear QSPI

#define ISPIF_DIS       0x02000200      // Disable all, disable QSPI

#define ISPIF_CLR       0x00000200      // Clear QSPI interrupt

#define SCOPEN          0x84000400      // Enable WBSCOPE interrupts

// Flash control constants

#define ERASEFLAG       0xc00001be

#define DISABLEWP       0x40000000

#define ENABLEWP        0x00000000

#define SZPAGEB         256

#define PGLENB          256

#define SZPAGEW         64

#define PGLENW          64

#define NPAGES          256

#define SECTORSZB       (NPAGES * SZPAGEB)      // In bytes, not words!!

#define SECTORSZW       (NPAGES * SZPAGEW)      // In words

#define NSECTORS        64

#define SECTOROF(A)     ((A) & (-1<<14))

#define SUBSECTOROF(A)  ((A) & (-1<<10))

#define PAGEOF(A)       ((A) & (-1<<6))

#define CPU_GO          0x0000

#define CPU_RESET       0x0040

#define CPU_INT         0x0080

#define CPU_STEP        0x0100

#define CPU_STALL       0x0200

#define CPU_HALT        0x0400

#define CPU_CLRCACHE    0x0800

#define CPU_sR0         0x0000

#define CPU_sSP         0x000d

#define CPU_sCC         0x000e

#define CPU_sPC         0x000f

#define CPU_uR0         0x0010

#define CPU_uSP         0x001d

#define CPU_uCC         0x001e

#define CPU_uPC         0x001f

#define SCOPE_NO_RESET  0x80000000

#define SCOPE_TRIGGER   (0x08000000|SCOPE_NO_RESET)

#define SCOPE_MANUAL    SCOPE_TRIGGER

#define SCOPE_DISABLE   (0x04000000)

typedef struct {

        unsigned        m_addr;

        const char      *m_name;

} REGNAME;

extern  const   REGNAME *bregs;

extern  const   int     NREGS;

// #define      NREGS   (sizeof(bregs)/sizeof(bregs[0]))

extern  unsigned        addrdecode(const char *v);

extern  const   char *addrname(const unsigned v);

#include "ttybus.h"

// #include "portbus.h"

typedef TTYBUS  FPGA;

#endif