Subversion Repositories opencpu32

--! @file

--! @brief Testbench for Multiplexer4_1

--! Use standard library and import the packages (std_logic_1164,std_logic_unsigned,std_logic_arith)

LIBRARY ieee;

use ieee.std_logic_1164.all;

use ieee.std_logic_unsigned.all;

use ieee.std_logic_arith.all;

--! Use CPU Definitions package

use work.pkgOpenCPU32.all;

ENTITY testMultiplexer4_1 IS

END testMultiplexer4_1;

--! @brief Multiplexer4_1 Testbench file

--! @details Test multiplexer operations changing the selection signal

--! for more information: http://en.wikipedia.org/wiki/Multiplexer

ARCHITECTURE behavior OF testMultiplexer4_1 IS

    --! Component declaration to instantiate the Multiplexer circuit

    COMPONENT Multiplexer4_1

    generic (n : integer := nBits - 1);                                 --! Generic value (Used to easily change the size of the Alu on the package)

         Port ( A   : in  STD_LOGIC_VECTOR (n downto 0); --! First Input

           B   : in  STD_LOGIC_VECTOR (n downto 0);      --! Second Input

                          C   : in  STD_LOGIC_VECTOR (n downto 0);       --! Third Input

                          D   : in  STD_LOGIC_VECTOR (n downto 0);       --! Forth Input

                          E   : in  STD_LOGIC_VECTOR (n downto 0);       --! Fifth Input

           sel : in  STD_LOGIC_VECTOR (2 downto 0);      --! Select inputs (1, 2, 3, 4, 5)

           S   : out  STD_LOGIC_VECTOR (n downto 0));    --! Mux Output

    END COMPONENT;

   --Inputs

   signal A : std_logic_vector((nBits - 1) downto 0) := (others => '0');  --! Wire to connect Test signal to component

   signal B : std_logic_vector((nBits - 1) downto 0) := (others => '0');  --! Wire to connect Test signal to component

        signal C : std_logic_vector((nBits - 1) downto 0) := (others => '0');     --! Wire to connect Test signal to component

        signal D : std_logic_vector((nBits - 1) downto 0) := (others => '0');     --! Wire to connect Test signal to component

        signal E : std_logic_vector((nBits - 1) downto 0) := (others => '0');     --! Wire to connect Test signal to component

   signal sel : STD_LOGIC_VECTOR (2 downto 0) := "000";                                                  --! Wire to connect Test signal to component

        --Outputs

   signal S : std_logic_vector((nBits - 1) downto 0);                                                    --! Wire to connect Test signal to component

BEGIN

        --!Instantiate the Unit Under Test (Multiplexer4_1) (Doxygen bug if it's not commented!)

   uut: Multiplexer4_1 PORT MAP (

          A => A,

          B => B,

                         C => C,

                         D => D,

                         E => E,

          sel => sel,

          S => S

        );

   --! Process that will change sel signal and verify the Mux outputs

   stim_proc: process

   begin

      -- Sel 0 ---------------------------------------------------------------------------

                wait for 1 ps;

                REPORT "Select first channel" SEVERITY NOTE;

                sel <= "000";

                A <= conv_std_logic_vector(0, nBits);

                B <= conv_std_logic_vector(1000, nBits);

                C <= conv_std_logic_vector(2000, nBits);

                D <= conv_std_logic_vector(3000, nBits);

                E <= conv_std_logic_vector(4000, nBits);

                wait for 1 ns;  -- Wait to stabilize the response

                assert S = (A) report "Could not select first channel" severity FAILURE;

                -- Sel 1 ---------------------------------------------------------------------------

                wait for 1 ns;

                REPORT "Select second channel" SEVERITY NOTE;

                sel <= "001";

                A <= conv_std_logic_vector(0, nBits);

                B <= conv_std_logic_vector(1000, nBits);

                C <= conv_std_logic_vector(2000, nBits);

                D <= conv_std_logic_vector(3000, nBits);

                E <= conv_std_logic_vector(4000, nBits);

                wait for 1 ns;  -- Wait to stabilize the response

                assert S = (B) report "Could not select second channel" severity FAILURE;

                -- Sel 2 ---------------------------------------------------------------------------

                wait for 1 ns;

                REPORT "Select third channel" SEVERITY NOTE;

                sel <= "010";

                A <= conv_std_logic_vector(0, nBits);

                B <= conv_std_logic_vector(1000, nBits);

                C <= conv_std_logic_vector(2000, nBits);

                D <= conv_std_logic_vector(3000, nBits);

                E <= conv_std_logic_vector(4000, nBits);

                wait for 1 ns;  -- Wait to stabilize the response

                assert S = (C) report "Could not select third channel" severity FAILURE;

                -- Sel 3 ---------------------------------------------------------------------------

                wait for 1 ns;

                REPORT "Select forth channel" SEVERITY NOTE;

                sel <= "011";

                A <= conv_std_logic_vector(0, nBits);

                B <= conv_std_logic_vector(1000, nBits);

                C <= conv_std_logic_vector(2000, nBits);

                D <= conv_std_logic_vector(3000, nBits);

                E <= conv_std_logic_vector(4000, nBits);

                wait for 1 ns;  -- Wait to stabilize the response

                assert S = (D) report "Could not select forth channel" severity FAILURE;

                -- Sel 4 ---------------------------------------------------------------------------

                wait for 1 ns;

                REPORT "Select fifth channel" SEVERITY NOTE;

                sel <= "100";

                A <= conv_std_logic_vector(0, nBits);

                B <= conv_std_logic_vector(1000, nBits);

                C <= conv_std_logic_vector(2000, nBits);

                D <= conv_std_logic_vector(3000, nBits);

                E <= conv_std_logic_vector(4000, nBits);

                wait for 1 ns;  -- Wait to stabilize the response

                assert S = (E) report "Could not select fifth channel" severity FAILURE;

                -- Finish simulation

                assert false report "NONE. End of simulation." severity failure;

   end process;

END;