Subversion Repositories openmsp430

//----------------------------------------------------------------------------

// Copyright (C) 2009 , Olivier Girard

//

// Redistribution and use in source and binary forms, with or without

// modification, are permitted provided that the following conditions

// are met:

//     * Redistributions of source code must retain the above copyright

//       notice, this list of conditions and the following disclaimer.

//     * Redistributions in binary form must reproduce the above copyright

//       notice, this list of conditions and the following disclaimer in the

//       documentation and/or other materials provided with the distribution.

//     * Neither the name of the authors nor the names of its contributors

//       may be used to endorse or promote products derived from this software

//       without specific prior written permission.

//

// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE

// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,

// OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF

// THE POSSIBILITY OF SUCH DAMAGE

//

//----------------------------------------------------------------------------

//

// *File Name: omsp_mem_backbone.v

// 

// *Module Description:

//                       Memory interface backbone (decoder + arbiter)

//

// *Author(s):

//              - Olivier Girard,    olgirard@gmail.com

//

//----------------------------------------------------------------------------

// $Rev: 151 $

// $LastChangedBy: olivier.girard $

// $LastChangedDate: 2012-07-23 00:24:11 +0200 (Mon, 23 Jul 2012) $

//----------------------------------------------------------------------------

`ifdef OMSP_NO_INCLUDE

`else

`include "openMSP430_defines.v"

`endif

module  omsp_mem_backbone (

// OUTPUTs

    dbg_mem_din,                    // Debug unit Memory data input

    dmem_addr,                      // Data Memory address

    dmem_cen,                       // Data Memory chip enable (low active)

    dmem_din,                       // Data Memory data input

    dmem_wen,                       // Data Memory write enable (low active)

    eu_mdb_in,                      // Execution Unit Memory data bus input

    fe_mdb_in,                      // Frontend Memory data bus input

    fe_pmem_wait,                   // Frontend wait for Instruction fetch

    per_addr,                       // Peripheral address

    per_din,                        // Peripheral data input

    per_we,                         // Peripheral write enable (high active)

    per_en,                         // Peripheral enable (high active)

    pmem_addr,                      // Program Memory address

    pmem_cen,                       // Program Memory chip enable (low active)

    pmem_din,                       // Program Memory data input (optional)

    pmem_wen,                       // Program Memory write enable (low active) (optional)

// INPUTs

    dbg_halt_st,                    // Halt/Run status from CPU

    dbg_mem_addr,                   // Debug address for rd/wr access

    dbg_mem_dout,                   // Debug unit data output

    dbg_mem_en,                     // Debug unit memory enable

    dbg_mem_wr,                     // Debug unit memory write

    dmem_dout,                      // Data Memory data output

    eu_mab,                         // Execution Unit Memory address bus

    eu_mb_en,                       // Execution Unit Memory bus enable

    eu_mb_wr,                       // Execution Unit Memory bus write transfer

    eu_mdb_out,                     // Execution Unit Memory data bus output

    fe_mab,                         // Frontend Memory address bus

    fe_mb_en,                       // Frontend Memory bus enable

    mclk,                           // Main system clock

    per_dout,                       // Peripheral data output

    pmem_dout,                      // Program Memory data output

    puc_rst,                        // Main system reset

    scan_enable                     // Scan enable (active during scan shifting)

);

// OUTPUTs

//=========

output        [15:0] dbg_mem_din;   // Debug unit Memory data input

output [`DMEM_MSB:0] dmem_addr;     // Data Memory address

output               dmem_cen;      // Data Memory chip enable (low active)

output        [15:0] dmem_din;      // Data Memory data input

output         [1:0] dmem_wen;      // Data Memory write enable (low active)

output        [15:0] eu_mdb_in;     // Execution Unit Memory data bus input

output        [15:0] fe_mdb_in;     // Frontend Memory data bus input

output               fe_pmem_wait;  // Frontend wait for Instruction fetch

output        [13:0] per_addr;      // Peripheral address

output        [15:0] per_din;       // Peripheral data input

output         [1:0] per_we;        // Peripheral write enable (high active)

output               per_en;        // Peripheral enable (high active)

output [`PMEM_MSB:0] pmem_addr;     // Program Memory address

output               pmem_cen;      // Program Memory chip enable (low active)

output        [15:0] pmem_din;      // Program Memory data input (optional)

output         [1:0] pmem_wen;      // Program Memory write enable (low active) (optional)

// INPUTs

//=========

input                dbg_halt_st;   // Halt/Run status from CPU

input         [15:0] dbg_mem_addr;  // Debug address for rd/wr access

input         [15:0] dbg_mem_dout;  // Debug unit data output

input                dbg_mem_en;    // Debug unit memory enable

input          [1:0] dbg_mem_wr;    // Debug unit memory write

input         [15:0] dmem_dout;     // Data Memory data output

input         [14:0] eu_mab;        // Execution Unit Memory address bus

input                eu_mb_en;      // Execution Unit Memory bus enable

input          [1:0] eu_mb_wr;      // Execution Unit Memory bus write transfer

input         [15:0] eu_mdb_out;    // Execution Unit Memory data bus output

input         [14:0] fe_mab;        // Frontend Memory address bus

input                fe_mb_en;      // Frontend Memory bus enable

input                mclk;          // Main system clock

input         [15:0] per_dout;      // Peripheral data output

input         [15:0] pmem_dout;     // Program Memory data output

input                puc_rst;       // Main system reset

input                scan_enable;   // Scan enable (active during scan shifting)

//=============================================================================

// 1)  DECODER

//=============================================================================

// RAM Interface

//------------------

// Execution unit access

wire               eu_dmem_cen   = ~(eu_mb_en & (eu_mab>=(`DMEM_BASE>>1)) &

                                                (eu_mab<((`DMEM_BASE+`DMEM_SIZE)>>1)));

wire        [15:0] eu_dmem_addr  = {1'b0, eu_mab}-(`DMEM_BASE>>1);

// Debug interface access

wire               dbg_dmem_cen  = ~(dbg_mem_en & (dbg_mem_addr[15:1]>=(`DMEM_BASE>>1)) &

                                                  (dbg_mem_addr[15:1]<((`DMEM_BASE+`DMEM_SIZE)>>1)));

wire        [15:0] dbg_dmem_addr = {1'b0, dbg_mem_addr[15:1]}-(`DMEM_BASE>>1);

// RAM Interface

wire [`DMEM_MSB:0] dmem_addr     = ~dbg_dmem_cen ? dbg_dmem_addr[`DMEM_MSB:0] : eu_dmem_addr[`DMEM_MSB:0];

wire               dmem_cen      =  dbg_dmem_cen & eu_dmem_cen;

wire         [1:0] dmem_wen      = ~(dbg_mem_wr | eu_mb_wr);

wire        [15:0] dmem_din      = ~dbg_dmem_cen ? dbg_mem_dout : eu_mdb_out;

// ROM Interface

//------------------

parameter          PMEM_OFFSET   = (16'hFFFF-`PMEM_SIZE+1);

// Execution unit access (only read access are accepted)

wire               eu_pmem_cen   = ~(eu_mb_en & ~|eu_mb_wr & (eu_mab>=(PMEM_OFFSET>>1)));

wire        [15:0] eu_pmem_addr  = eu_mab-(PMEM_OFFSET>>1);

// Front-end access

wire               fe_pmem_cen   = ~(fe_mb_en & (fe_mab>=(PMEM_OFFSET>>1)));

wire        [15:0] fe_pmem_addr  = fe_mab-(PMEM_OFFSET>>1);

// Debug interface access

wire               dbg_pmem_cen  = ~(dbg_mem_en & (dbg_mem_addr[15:1]>=(PMEM_OFFSET>>1)));

wire        [15:0] dbg_pmem_addr = {1'b0, dbg_mem_addr[15:1]}-(PMEM_OFFSET>>1);

// ROM Interface (Execution unit has priority)

wire [`PMEM_MSB:0] pmem_addr     = ~dbg_pmem_cen ? dbg_pmem_addr[`PMEM_MSB:0] :

                                   ~eu_pmem_cen  ? eu_pmem_addr[`PMEM_MSB:0]  : fe_pmem_addr[`PMEM_MSB:0];

wire               pmem_cen      =  fe_pmem_cen & eu_pmem_cen & dbg_pmem_cen;

wire         [1:0] pmem_wen      = ~dbg_mem_wr;

wire        [15:0] pmem_din      =  dbg_mem_dout;

wire               fe_pmem_wait  = (~fe_pmem_cen & ~eu_pmem_cen);

// Peripherals

//--------------------

wire              dbg_per_en   =  dbg_mem_en & (dbg_mem_addr[15:1]<(`PER_SIZE>>1));

wire              eu_per_en    =  eu_mb_en   & (eu_mab<(`PER_SIZE>>1));

wire       [15:0] per_din      =  dbg_mem_en ? dbg_mem_dout               : eu_mdb_out;

wire        [1:0] per_we       =  dbg_mem_en ? dbg_mem_wr                 : eu_mb_wr;

wire              per_en       =  dbg_mem_en ? dbg_per_en                 : eu_per_en;

wire [`PER_MSB:0] per_addr_mux =  dbg_mem_en ? dbg_mem_addr[`PER_MSB+1:1] : eu_mab[`PER_MSB:0];

wire       [14:0] per_addr_ful =  {{15-`PER_AWIDTH{1'b0}}, per_addr_mux};

wire       [13:0] per_addr     =   per_addr_ful[13:0];

reg   [15:0] per_dout_val;

always @ (posedge mclk or posedge puc_rst)

  if (puc_rst)  per_dout_val <= 16'h0000;

  else          per_dout_val <= per_dout;

// Frontend data Mux

//---------------------------------

// Whenever the frontend doesn't access the ROM,  backup the data

// Detect whenever the data should be backuped and restored

reg         fe_pmem_cen_dly;

always @(posedge mclk or posedge puc_rst)

  if (puc_rst) fe_pmem_cen_dly <=  1'b0;

  else         fe_pmem_cen_dly <=  fe_pmem_cen;

wire fe_pmem_save    = ( fe_pmem_cen & ~fe_pmem_cen_dly) & ~dbg_halt_st;

wire fe_pmem_restore = (~fe_pmem_cen &  fe_pmem_cen_dly) |  dbg_halt_st;

`ifdef CLOCK_GATING

wire mclk_bckup;

omsp_clock_gate clock_gate_bckup (.gclk(mclk_bckup),

                                  .clk (mclk), .enable(fe_pmem_save), .scan_enable(scan_enable));

`else

wire mclk_bckup = mclk;

`endif

reg  [15:0] pmem_dout_bckup;

always @(posedge mclk_bckup or posedge puc_rst)

  if (puc_rst)           pmem_dout_bckup     <=  16'h0000;

`ifdef CLOCK_GATING

  else                   pmem_dout_bckup     <=  pmem_dout;

`else

  else if (fe_pmem_save) pmem_dout_bckup     <=  pmem_dout;

`endif

// Mux between the ROM data and the backup

reg         pmem_dout_bckup_sel;

always @(posedge mclk or posedge puc_rst)

  if (puc_rst)              pmem_dout_bckup_sel <=  1'b0;

  else if (fe_pmem_save)    pmem_dout_bckup_sel <=  1'b1;

  else if (fe_pmem_restore) pmem_dout_bckup_sel <=  1'b0;

assign fe_mdb_in = pmem_dout_bckup_sel ? pmem_dout_bckup : pmem_dout;

// Execution-Unit data Mux

//---------------------------------

// Select between peripherals, RAM and ROM

reg [1:0] eu_mdb_in_sel;

always @(posedge mclk or posedge puc_rst)

  if (puc_rst)  eu_mdb_in_sel <= 2'b00;

  else          eu_mdb_in_sel <= {~eu_pmem_cen, per_en};

// Mux

assign      eu_mdb_in      = eu_mdb_in_sel[1] ? pmem_dout    :

                             eu_mdb_in_sel[0] ? per_dout_val : dmem_dout;

// Debug interface  data Mux

//---------------------------------

// Select between peripherals, RAM and ROM

`ifdef DBG_EN

reg   [1:0] dbg_mem_din_sel;

always @(posedge mclk or posedge puc_rst)

  if (puc_rst)  dbg_mem_din_sel <= 2'b00;

  else          dbg_mem_din_sel <= {~dbg_pmem_cen, dbg_per_en};

`else

wire  [1:0] dbg_mem_din_sel  = 2'b00;

`endif

// Mux

assign      dbg_mem_din  = dbg_mem_din_sel[1] ? pmem_dout    :

                           dbg_mem_din_sel[0] ? per_dout_val : dmem_dout;

endmodule // omsp_mem_backbone

`ifdef OMSP_NO_INCLUDE

`else

`include "openMSP430_undefines.v"

`endif