Subversion Repositories openmsp430

//----------------------------------------------------------------------------

// Copyright (C) 2009 , Olivier Girard

//

// Redistribution and use in source and binary forms, with or without

// modification, are permitted provided that the following conditions

// are met:

//     * Redistributions of source code must retain the above copyright

//       notice, this list of conditions and the following disclaimer.

//     * Redistributions in binary form must reproduce the above copyright

//       notice, this list of conditions and the following disclaimer in the

//       documentation and/or other materials provided with the distribution.

//     * Neither the name of the authors nor the names of its contributors

//       may be used to endorse or promote products derived from this software

//       without specific prior written permission.

//

// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE

// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,

// OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF

// THE POSSIBILITY OF SUCH DAMAGE

//

//----------------------------------------------------------------------------

//

// *File Name: template_periph_16b.v

// 

// *Module Description:

//                       16 bit peripheral template.

//

// *Author(s):

//              - Olivier Girard,    olgirard@gmail.com

//

//----------------------------------------------------------------------------

// $Rev: 134 $

// $LastChangedBy: olivier.girard $

// $LastChangedDate: 2012-03-22 21:31:06 +0100 (Thu, 22 Mar 2012) $

//----------------------------------------------------------------------------

module  template_periph_16b (

// OUTPUTs

    per_dout,                       // Peripheral data output

// INPUTs

    mclk,                           // Main system clock

    per_addr,                       // Peripheral address

    per_din,                        // Peripheral data input

    per_en,                         // Peripheral enable (high active)

    per_we,                         // Peripheral write enable (high active)

    puc_rst                         // Main system reset

);

// OUTPUTs

//=========

output       [15:0] per_dout;       // Peripheral data output

// INPUTs

//=========

input               mclk;           // Main system clock

input        [13:0] per_addr;       // Peripheral address

input        [15:0] per_din;        // Peripheral data input

input               per_en;         // Peripheral enable (high active)

input         [1:0] per_we;         // Peripheral write enable (high active)

input               puc_rst;        // Main system reset

//=============================================================================

// 1)  PARAMETER DECLARATION

//=============================================================================

// Register base address (must be aligned to decoder bit width)

parameter       [14:0] BASE_ADDR   = 15'h0190;

// Decoder bit width (defines how many bits are considered for address decoding)

parameter              DEC_WD      =  3;

// Register addresses offset

parameter [DEC_WD-1:0] CNTRL1      = 'h0,

                       CNTRL2      = 'h2,

                       CNTRL3      = 'h4,

                       CNTRL4      = 'h6;

// Register one-hot decoder utilities

parameter              DEC_SZ      =  (1 << DEC_WD);

parameter [DEC_SZ-1:0] BASE_REG    =  {{DEC_SZ-1{1'b0}}, 1'b1};

// Register one-hot decoder

parameter [DEC_SZ-1:0] CNTRL1_D    = (BASE_REG << CNTRL1),

                       CNTRL2_D    = (BASE_REG << CNTRL2),

                       CNTRL3_D    = (BASE_REG << CNTRL3),

                       CNTRL4_D    = (BASE_REG << CNTRL4);

//============================================================================

// 2)  REGISTER DECODER

//============================================================================

// Local register selection

wire              reg_sel   =  per_en & (per_addr[13:DEC_WD-1]==BASE_ADDR[14:DEC_WD]);

// Register local address

wire [DEC_WD-1:0] reg_addr  =  {per_addr[DEC_WD-2:0], 1'b0};

// Register address decode

wire [DEC_SZ-1:0] reg_dec   =  (CNTRL1_D  &  {DEC_SZ{(reg_addr == CNTRL1 )}})  |

                               (CNTRL2_D  &  {DEC_SZ{(reg_addr == CNTRL2 )}})  |

                               (CNTRL3_D  &  {DEC_SZ{(reg_addr == CNTRL3 )}})  |

                               (CNTRL4_D  &  {DEC_SZ{(reg_addr == CNTRL4 )}});

// Read/Write probes

wire              reg_write =  |per_we & reg_sel;

wire              reg_read  = ~|per_we & reg_sel;

// Read/Write vectors

wire [DEC_SZ-1:0] reg_wr    = reg_dec & {DEC_SZ{reg_write}};

wire [DEC_SZ-1:0] reg_rd    = reg_dec & {DEC_SZ{reg_read}};

//============================================================================

// 3) REGISTERS

//============================================================================

// CNTRL1 Register

//-----------------   

reg  [15:0] cntrl1;

wire        cntrl1_wr = reg_wr[CNTRL1];

always @ (posedge mclk or posedge puc_rst)

  if (puc_rst)        cntrl1 <=  16'h0000;

  else if (cntrl1_wr) cntrl1 <=  per_din;

// CNTRL2 Register

//-----------------   

reg  [15:0] cntrl2;

wire        cntrl2_wr = reg_wr[CNTRL2];

always @ (posedge mclk or posedge puc_rst)

  if (puc_rst)        cntrl2 <=  16'h0000;

  else if (cntrl2_wr) cntrl2 <=  per_din;

// CNTRL3 Register

//-----------------   

reg  [15:0] cntrl3;

wire        cntrl3_wr = reg_wr[CNTRL3];

always @ (posedge mclk or posedge puc_rst)

  if (puc_rst)        cntrl3 <=  16'h0000;

  else if (cntrl3_wr) cntrl3 <=  per_din;

// CNTRL4 Register

//-----------------   

reg  [15:0] cntrl4;

wire        cntrl4_wr = reg_wr[CNTRL4];

always @ (posedge mclk or posedge puc_rst)

  if (puc_rst)        cntrl4 <=  16'h0000;

  else if (cntrl4_wr) cntrl4 <=  per_din;

//============================================================================

// 4) DATA OUTPUT GENERATION

//============================================================================

// Data output mux

wire [15:0] cntrl1_rd  = cntrl1  & {16{reg_rd[CNTRL1]}};

wire [15:0] cntrl2_rd  = cntrl2  & {16{reg_rd[CNTRL2]}};

wire [15:0] cntrl3_rd  = cntrl3  & {16{reg_rd[CNTRL3]}};

wire [15:0] cntrl4_rd  = cntrl4  & {16{reg_rd[CNTRL4]}};

wire [15:0] per_dout   =  cntrl1_rd  |

                          cntrl2_rd  |

                          cntrl3_rd  |

                          cntrl4_rd;

endmodule // template_periph_16b