OpenCores
URL https://opencores.org/ocsvn/openmsp430/openmsp430/trunk

Subversion Repositories openmsp430

[/] [openmsp430/] [trunk/] [core/] [sim/] [rtl_sim/] [run/] [run_all] - Blame information for rev 204

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 91 olivier.gi 
#!/bin/bash
2 2 olivier.gi 
 
3 65 olivier.gi 
# Disable waveform dumping
4 
OMSP_NODUMP=1
5 
export OMSP_NODUMP
6 
 
7 200 olivier.gi 
# Choose GCC toolchain prefix ('msp430' for MSPGCC / 'msp430-elf' for GCC RedHat/TI)
8 
# Note: default to MSPGCC until GCC RedHat/TI is mature enough
9 202 olivier.gi 
if command -v msp430-gcc >/dev/null; then
10 200 olivier.gi 
    MSPGCC_PFX=msp430
11 
else
12 
    MSPGCC_PFX=msp430-elf
13 
fi
14 
#MSPGCC_PFX=msp430
15 
export MSPGCC_PFX
16 
 
17 122 olivier.gi 
# Choose simulator:
18 
#                   - iverilog  : Icarus Verilog  (default)
19 
#                   - cver      : CVer
20 
#                   - verilog   : Verilog-XL
21 
#                   - ncverilog : NC-Verilog
22 
#                   - vcs       : VCS
23 
#                   - vsim      : Modelsim
24 
#                   - isim      : Xilinx simulator
25 
OMSP_SIMULATOR=iverilog
26 
export OMSP_SIMULATOR
27 2 olivier.gi 
 
28 122 olivier.gi 
 
29 202 olivier.gi 
# Argument specifies number of regression loops
30 
if [ $# -ne 1 ]; then
31 
    LAST_REGRESSION=0
32 
else
33 
    LAST_REGRESSION=$(($1-1))
34 
fi
35 2 olivier.gi 
 
36 202 olivier.gi 
# Cleanup from previous regression
37 
LOG_DIR=./log
38 
rm -rf $LOG_DIR/*
39 2 olivier.gi 
 
40 202 olivier.gi 
# Perform the regression runs
41 
for (( ii=0; ii<=$LAST_REGRESSION; ii++ ))
42 
  do
43 2 olivier.gi 
 
44 202 olivier.gi 
    # Cleanup & log directory setup
45 
    rm -rf ./cov_work
46 
    LOG_DIR=./log/$ii
47 
    mkdir -p $LOG_DIR
48 134 olivier.gi 
 
49 202 olivier.gi 
    # Two-Operand Arithmetic test patterns
50 
    ../bin/msp430sim two-op_mov               | tee $LOG_DIR/two-op_mov.log
51 
    ../bin/msp430sim two-op_mov-b             | tee $LOG_DIR/two-op_mov-b.log
52 
    ../bin/msp430sim two-op_add               | tee $LOG_DIR/two-op_add.log
53 2 olivier.gi 
 
54 202 olivier.gi 
    ../bin/msp430sim two-op_add-b             | tee $LOG_DIR/two-op_add-b.log
55 
    ../bin/msp430sim two-op_addc              | tee $LOG_DIR/two-op_addc.log
56 
    ../bin/msp430sim two-op_sub               | tee $LOG_DIR/two-op_sub.log
57 
    ../bin/msp430sim two-op_subc              | tee $LOG_DIR/two-op_subc.log
58 
    ../bin/msp430sim two-op_cmp               | tee $LOG_DIR/two-op_cmp.log
59 
    ../bin/msp430sim two-op_bit               | tee $LOG_DIR/two-op_bit.log
60 
    ../bin/msp430sim two-op_bic               | tee $LOG_DIR/two-op_bic.log
61 
    ../bin/msp430sim two-op_bis               | tee $LOG_DIR/two-op_bis.log
62 
    ../bin/msp430sim two-op_xor               | tee $LOG_DIR/two-op_xor.log
63 
    ../bin/msp430sim two-op_and               | tee $LOG_DIR/two-op_and.log
64 
    ../bin/msp430sim two-op_dadd              | tee $LOG_DIR/two-op_dadd.log
65 
    ../bin/msp430sim two-op_autoincr          | tee $LOG_DIR/two-op_autoincr.log
66 
    ../bin/msp430sim two-op_autoincr-b        | tee $LOG_DIR/two-op_autoincr-b.log
67 2 olivier.gi 
 
68 202 olivier.gi 
    # Conditional Jump test patterns
69 
    ../bin/msp430sim c-jump_jeq               | tee $LOG_DIR/c-jump_jeq.log
70 
    ../bin/msp430sim c-jump_jne               | tee $LOG_DIR/c-jump_jne.log
71 
    ../bin/msp430sim c-jump_jc                | tee $LOG_DIR/c-jump_jc.log
72 
    ../bin/msp430sim c-jump_jnc               | tee $LOG_DIR/c-jump_jnc.log
73 
    ../bin/msp430sim c-jump_jn                | tee $LOG_DIR/c-jump_jn.log
74 
    ../bin/msp430sim c-jump_jge               | tee $LOG_DIR/c-jump_jge.log
75 
    ../bin/msp430sim c-jump_jl                | tee $LOG_DIR/c-jump_jl.log
76 
    ../bin/msp430sim c-jump_jmp               | tee $LOG_DIR/c-jump_jmp.log
77 134 olivier.gi 
 
78 202 olivier.gi 
    # Single-Operand Arithmetic test patterns
79 
    ../bin/msp430sim sing-op_rrc              | tee $LOG_DIR/sing-op_rrc.log
80 
    ../bin/msp430sim sing-op_rra              | tee $LOG_DIR/sing-op_rra.log
81 
    ../bin/msp430sim sing-op_swpb             | tee $LOG_DIR/sing-op_swpb.log
82 
    ../bin/msp430sim sing-op_sxt              | tee $LOG_DIR/sing-op_sxt.log
83 
    ../bin/msp430sim sing-op_push             | tee $LOG_DIR/sing-op_push.log
84 
    ../bin/msp430sim sing-op_call             | tee $LOG_DIR/sing-op_call.log
85 2 olivier.gi 
 
86 202 olivier.gi 
    # Interrupts & NMI
87 
    ../bin/msp430sim sing-op_reti             | tee $LOG_DIR/sing-op_reti.log
88 
    ../bin/msp430sim nmi                      | tee $LOG_DIR/nmi.log
89 
    ../bin/msp430sim irq32                    | tee $LOG_DIR/irq32.log
90 
    ../bin/msp430sim irq64                    | tee $LOG_DIR/irq64.log
91 2 olivier.gi 
 
92 202 olivier.gi 
    # ROM Data Read access
93 
    ../bin/msp430sim two-op_add_rom-rd        | tee $LOG_DIR/two-op_add_rom-rd.log
94 
    ../bin/msp430sim sing-op_push_rom-rd      | tee $LOG_DIR/sing-op_push_rom-rd.log
95 
    ../bin/msp430sim sing-op_call_rom-rd      | tee $LOG_DIR/sing-op_call_rom-rd.log
96 154 olivier.gi 
 
97 202 olivier.gi 
    # Power saving modes (CPUOFF, OSCOFF, SCG0, SCG1)
98 
    ../bin/msp430sim op_modes                 | tee $LOG_DIR/op_modes.log
99 
    ../bin/msp430sim op_modes_asic            | tee $LOG_DIR/op_modes_asic.log
100 
    ../bin/msp430sim lp_modes_asic            | tee $LOG_DIR/lp_modes_asic.log
101 
    ../bin/msp430sim lp_modes_dbg_asic        | tee $LOG_DIR/lp_modes_dbg_asic.log
102 134 olivier.gi 
 
103 202 olivier.gi 
    # CPU startup conditions
104 
    ../bin/msp430sim cpu_startup_asic         | tee $LOG_DIR/cpu_startup_asic.log
105 134 olivier.gi 
 
106 202 olivier.gi 
    # Basic clock module
107 
    ../bin/msp430sim clock_module             | tee $LOG_DIR/clock_module.log
108 
    ../bin/msp430sim clock_module_asic        | tee $LOG_DIR/clock_module_asic.log
109 
    ../bin/msp430sim clock_module_asic_mclk   | tee $LOG_DIR/clock_module_asic_mclk.log
110 
    ../bin/msp430sim clock_module_asic_smclk  | tee $LOG_DIR/clock_module_asic_smclk.log
111 
    ../bin/msp430sim clock_module_asic_lfxt   | tee $LOG_DIR/clock_module_asic_lfxt.log
112 2 olivier.gi 
 
113 202 olivier.gi 
    # Serial Debug Interface (UART)
114 
    ../bin/msp430sim dbg_uart                 | tee $LOG_DIR/dbg_uart.log
115 
    ../bin/msp430sim dbg_uart_sync            | tee $LOG_DIR/dbg_uart_sync.log
116 
    ../bin/msp430sim dbg_uart_cpu             | tee $LOG_DIR/dbg_uart_cpu.log
117 
    ../bin/msp430sim dbg_uart_mem             | tee $LOG_DIR/dbg_uart_mem.log
118 
    ../bin/msp430sim dbg_uart_hwbrk0          | tee $LOG_DIR/dbg_uart_hwbrk0.log
119 
    ../bin/msp430sim dbg_uart_hwbrk1          | tee $LOG_DIR/dbg_uart_hwbrk1.log
120 
    ../bin/msp430sim dbg_uart_hwbrk2          | tee $LOG_DIR/dbg_uart_hwbrk2.log
121 
    ../bin/msp430sim dbg_uart_hwbrk3          | tee $LOG_DIR/dbg_uart_hwbrk3.log
122 
    ../bin/msp430sim dbg_uart_rdwr            | tee $LOG_DIR/dbg_uart_rdwr.log
123 
    ../bin/msp430sim dbg_uart_halt_irq        | tee $LOG_DIR/dbg_uart_halt_irq.log
124 
    ../bin/msp430sim dbg_uart_onoff           | tee $LOG_DIR/dbg_uart_onoff.log
125 
    ../bin/msp430sim dbg_uart_onoff_asic      | tee $LOG_DIR/dbg_uart_onoff_asic.log
126 2 olivier.gi 
 
127 202 olivier.gi 
    # Serial Debug Interface (I2C)
128 
    ../bin/msp430sim dbg_i2c                  | tee $LOG_DIR/dbg_i2c.log
129 
    ../bin/msp430sim dbg_i2c_sync             | tee $LOG_DIR/dbg_i2c_sync.log
130 
    ../bin/msp430sim dbg_i2c_cpu              | tee $LOG_DIR/dbg_i2c_cpu.log
131 
    ../bin/msp430sim dbg_i2c_mem              | tee $LOG_DIR/dbg_i2c_mem.log
132 
    ../bin/msp430sim dbg_i2c_hwbrk0           | tee $LOG_DIR/dbg_i2c_hwbrk0.log
133 
    ../bin/msp430sim dbg_i2c_hwbrk1           | tee $LOG_DIR/dbg_i2c_hwbrk1.log
134 
    ../bin/msp430sim dbg_i2c_hwbrk2           | tee $LOG_DIR/dbg_i2c_hwbrk2.log
135 
    ../bin/msp430sim dbg_i2c_hwbrk3           | tee $LOG_DIR/dbg_i2c_hwbrk3.log
136 
    ../bin/msp430sim dbg_i2c_rdwr             | tee $LOG_DIR/dbg_i2c_rdwr.log
137 
    ../bin/msp430sim dbg_i2c_halt_irq         | tee $LOG_DIR/dbg_i2c_halt_irq.log
138 
    ../bin/msp430sim dbg_i2c_onoff            | tee $LOG_DIR/dbg_i2c_onoff.log
139 
    ../bin/msp430sim dbg_i2c_onoff_asic       | tee $LOG_DIR/dbg_i2c_onoff_asic.log
140 2 olivier.gi 
 
141 202 olivier.gi 
    # SFR test patterns
142 
    ../bin/msp430sim sfr                      | tee $LOG_DIR/sfr.log
143 2 olivier.gi 
 
144 202 olivier.gi 
    # SCAN test patterns (only to increase coverage)
145 
    ../bin/msp430sim scan                     | tee $LOG_DIR/scan.log
146 154 olivier.gi 
 
147 202 olivier.gi 
    # Watchdog test patterns
148 
    ../bin/msp430sim wdt_interval             | tee $LOG_DIR/wdt_interval.log
149 
    ../bin/msp430sim wdt_watchdog             | tee $LOG_DIR/wdt_watchdog.log
150 
    ../bin/msp430sim wdt_clkmux               | tee $LOG_DIR/wdt_clkmux.log
151 
    ../bin/msp430sim wdt_wkup                 | tee $LOG_DIR/wdt_wkup.log
152 154 olivier.gi 
 
153 202 olivier.gi 
    # GPIO test patterns
154 
    ../bin/msp430sim gpio_rdwr                | tee $LOG_DIR/gpio_rdwr.log
155 
    ../bin/msp430sim gpio_irq                 | tee $LOG_DIR/gpio_irq.log
156 2 olivier.gi 
 
157 202 olivier.gi 
    # Peripheral templates test patterns
158 
    ../bin/msp430sim template_periph_8b       | tee $LOG_DIR/template_periph_8b.log
159 
    ../bin/msp430sim template_periph_16b      | tee $LOG_DIR/template_periph_16b.log
160 67 olivier.gi 
 
161 202 olivier.gi 
    # Timer A patterns
162 
    ../bin/msp430sim tA_modes                 | tee $LOG_DIR/tA_modes.log
163 
    ../bin/msp430sim tA_compare               | tee $LOG_DIR/tA_compare.log
164 
    ../bin/msp430sim tA_output                | tee $LOG_DIR/tA_output.log
165 
    ../bin/msp430sim tA_capture               | tee $LOG_DIR/tA_capture.log
166 
    ../bin/msp430sim tA_clkmux                | tee $LOG_DIR/tA_clkmux.log
167 
 
168 
    # DMA Interface
169 
    ../bin/msp430sim dma_rdwr_16b             | tee $LOG_DIR/dma_rdwr_16b.log
170 
    ../bin/msp430sim dma_rdwr_8b              | tee $LOG_DIR/dma_rdwr_8b.log
171 
    ../bin/msp430sim dma_resp                 | tee $LOG_DIR/dma_resp.log
172 
    ../bin/msp430sim dma_dbg_arbiter          | tee $LOG_DIR/dma_dbg_arbiter.log
173 
    ../bin/msp430sim dma_lpm0_asic            | tee $LOG_DIR/dma_lpm0_asic.log
174 
    ../bin/msp430sim dma_lpm1_asic            | tee $LOG_DIR/dma_lpm1_asic.log
175 
    ../bin/msp430sim dma_lpm2_asic            | tee $LOG_DIR/dma_lpm2_asic.log
176 
    ../bin/msp430sim dma_lpm3_asic            | tee $LOG_DIR/dma_lpm3_asic.log
177 
    ../bin/msp430sim dma_lpm4_asic            | tee $LOG_DIR/dma_lpm4_asic.log
178 
 
179 
    # Simple full duplex UART (8N1 protocol)
180 
    #../bin/msp430sim uart                    | tee $LOG_DIR/uart.log
181 
 
182 
    # Hardware multiplier test patterns
183 
    ../bin/msp430sim mpy_basic                | tee $LOG_DIR/mpy_basic.log
184 
 
185 
 
186 
    # Report regression results
187 
    ../bin/parse_results $LOG_DIR             | tee $LOG_DIR/../summary.$ii.log
188 
 
189 
done
190 
 
191 
 
192 
if [ $LAST_REGRESSION != 0 ]; then
193 
    ../bin/parse_summaries                    | tee $LOG_DIR/../regressions_summary.log
194 
fi

powered by: WebSVN 2.1.0

© copyright 1999-2025 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.