Subversion Repositories openmsp430

//----------------------------------------------------------------------------

// Copyright (C) 2001 Authors

//

// This source file may be used and distributed without restriction provided

// that this copyright statement is not removed from the file and that any

// derivative work contains the original copyright notice and the associated

// disclaimer.

//

// This source file is free software; you can redistribute it and/or modify

// it under the terms of the GNU Lesser General Public License as published

// by the Free Software Foundation; either version 2.1 of the License, or

// (at your option) any later version.

//

// This source is distributed in the hope that it will be useful, but WITHOUT

// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

// FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public

// License for more details.

//

// You should have received a copy of the GNU Lesser General Public License

// along with this source; if not, write to the Free Software Foundation,

// Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA

//

//----------------------------------------------------------------------------

//

// *File Name: omsp_alu.v

// 

// *Module Description:

//                       openMSP430 ALU

//

// *Author(s):

//              - Olivier Girard,    olgirard@gmail.com

//

//----------------------------------------------------------------------------

// $Rev: 34 $

// $LastChangedBy: olivier.girard $

// $LastChangedDate: 2009-12-29 20:10:34 +0100 (Di, 29 Dez 2009) $

//----------------------------------------------------------------------------

`include "timescale.v"

`include "openMSP430_defines.v"

module  omsp_alu (

// OUTPUTs

    alu_out,                       // ALU output value

    alu_out_add,                   // ALU adder output value

    alu_stat,                      // ALU Status {V,N,Z,C}

    alu_stat_wr,                   // ALU Status write {V,N,Z,C}

// INPUTs

    dbg_halt_st,                   // Halt/Run status from CPU

    exec_cycle,                    // Instruction execution cycle

    inst_alu,                      // ALU control signals

    inst_bw,                       // Decoded Inst: byte width

    inst_jmp,                      // Decoded Inst: Conditional jump

    inst_so,                       // Single-operand arithmetic

    op_dst,                        // Destination operand

    op_src,                        // Source operand

    status                         // R2 Status {V,N,Z,C}

);

// OUTPUTs

//=========

output       [15:0] alu_out;       // ALU output value

output       [15:0] alu_out_add;   // ALU adder output value

output        [3:0] alu_stat;      // ALU Status {V,N,Z,C}

output        [3:0] alu_stat_wr;   // ALU Status write {V,N,Z,C}

// INPUTs

//=========

input               dbg_halt_st;   // Halt/Run status from CPU

input               exec_cycle;    // Instruction execution cycle

input        [11:0] inst_alu;      // ALU control signals

input               inst_bw;       // Decoded Inst: byte width

input         [7:0] inst_jmp;      // Decoded Inst: Conditional jump

input         [7:0] inst_so;       // Single-operand arithmetic

input        [15:0] op_dst;        // Destination operand

input        [15:0] op_src;        // Source operand

input         [3:0] status;        // R2 Status {V,N,Z,C}

//=============================================================================

// 1)  FUNCTIONS

//=============================================================================

function [4:0] bcd_add;

   input [3:0] X;

   input [3:0] Y;

   input       C;

   reg   [4:0] Z;

   begin

      Z = {1'b0,X}+{1'b0,Y}+C;

      if (Z<10) bcd_add = Z;

      else      bcd_add = Z+6;

   end

endfunction

//=============================================================================

// 2)  INSTRUCTION FETCH/DECODE CONTROL STATE MACHINE

//=============================================================================

// SINGLE-OPERAND ARITHMETIC:

//-----------------------------------------------------------------------------

//   Mnemonic   S-Reg,   Operation                               Status bits

//              D-Reg,                                            V  N  Z  C

//

//   RRC         dst     C->MSB->...LSB->C                        *  *  *  *

//   RRA         dst     MSB->MSB->...LSB->C                      0  *  *  *

//   SWPB        dst     Swap bytes                               -  -  -  -

//   SXT         dst     Bit7->Bit8...Bit15                       0  *  *  *

//   PUSH        src     SP-2->SP, src->@SP                       -  -  -  -

//   CALL        dst     SP-2->SP, PC+2->@SP, dst->PC             -  -  -  -

//   RETI                TOS->SR, SP+2->SP, TOS->PC, SP+2->SP     *  *  *  *

//

//-----------------------------------------------------------------------------

// TWO-OPERAND ARITHMETIC:

//-----------------------------------------------------------------------------

//   Mnemonic   S-Reg,   Operation                               Status bits

//              D-Reg,                                            V  N  Z  C

//

//   MOV       src,dst    src            -> dst                   -  -  -  -

//   ADD       src,dst    src +  dst     -> dst                   *  *  *  *

//   ADDC      src,dst    src +  dst + C -> dst                   *  *  *  *

//   SUB       src,dst    dst + ~src + 1 -> dst                   *  *  *  *

//   SUBC      src,dst    dst + ~src + C -> dst                   *  *  *  *

//   CMP       src,dst    dst + ~src + 1                          *  *  *  *

//   DADD      src,dst    src +  dst + C -> dst (decimaly)        *  *  *  *

//   BIT       src,dst    src &  dst                              0  *  *  *

//   BIC       src,dst   ~src &  dst     -> dst                   -  -  -  -

//   BIS       src,dst    src |  dst     -> dst                   -  -  -  -

//   XOR       src,dst    src ^  dst     -> dst                   *  *  *  *

//   AND       src,dst    src &  dst     -> dst                   0  *  *  *

//

//-----------------------------------------------------------------------------

// * the status bit is affected

// - the status bit is not affected

// 0 the status bit is cleared

// 1 the status bit is set

//-----------------------------------------------------------------------------

// Invert source for substract and compare instructions.

wire        op_src_inv_cmd = exec_cycle & (inst_alu[`ALU_SRC_INV]);

wire [15:0] op_src_inv     = {16{op_src_inv_cmd}} ^ op_src;

// Mask the bit 8 for the Byte instructions for correct flags generation

wire        op_bit8_msk     = ~exec_cycle | ~inst_bw;

wire [16:0] op_src_in       = {1'b0, op_src_inv[15:9], op_src_inv[8] & op_bit8_msk, op_src_inv[7:0]};

wire [16:0] op_dst_in       = {1'b0, op_dst[15:9],     op_dst[8]     & op_bit8_msk, op_dst[7:0]};

// Clear the source operand (= jump offset) for conditional jumps

wire        jmp_not_taken  = (inst_jmp[`JL]  & ~(status[3]^status[2])) |

                             (inst_jmp[`JGE] &  (status[3]^status[2])) |

                             (inst_jmp[`JN]  &  ~status[2])            |

                             (inst_jmp[`JC]  &  ~status[0])            |

                             (inst_jmp[`JNC] &   status[0])            |

                             (inst_jmp[`JEQ] &  ~status[1])            |

                             (inst_jmp[`JNE] &   status[1]);

wire [16:0] op_src_in_jmp  = op_src_in & {17{~jmp_not_taken}};

// Adder / AND / OR / XOR

wire [16:0] alu_add        = op_src_in_jmp + op_dst_in;

wire [16:0] alu_and        = op_src_in     & op_dst_in;

wire [16:0] alu_or         = op_src_in     | op_dst_in;

wire [16:0] alu_xor        = op_src_in     ^ op_dst_in;

// Incrementer

wire        alu_inc         = exec_cycle & ((inst_alu[`ALU_INC_C] & status[0]) |

                                             inst_alu[`ALU_INC]);

wire [16:0] alu_add_inc    = alu_add + {16'h0000, alu_inc};

// Decimal adder (DADD)

wire  [4:0] alu_dadd0      = bcd_add(op_src_in[3:0],   op_dst_in[3:0],  status[0]);

wire  [4:0] alu_dadd1      = bcd_add(op_src_in[7:4],   op_dst_in[7:4],  alu_dadd0[4]);

wire  [4:0] alu_dadd2      = bcd_add(op_src_in[11:8],  op_dst_in[11:8], alu_dadd1[4]);

wire  [4:0] alu_dadd3      = bcd_add(op_src_in[15:12], op_dst_in[15:12],alu_dadd2[4]);

wire [16:0] alu_dadd       = {alu_dadd3, alu_dadd2[3:0], alu_dadd1[3:0], alu_dadd0[3:0]};

// Shifter for rotate instructions (RRC & RRA)

wire        alu_shift_msb  = inst_so[`RRC] ? status[0]     :

                             inst_bw       ? op_src[7]     : op_src[15];

wire        alu_shift_7    = inst_bw       ? alu_shift_msb : op_src[8];

wire [16:0] alu_shift      = {1'b0, alu_shift_msb, op_src[15:9], alu_shift_7, op_src[7:1]};

// Swap bytes / Extend Sign

wire [16:0] alu_swpb       = {1'b0, op_src[7:0],op_src[15:8]};

wire [16:0] alu_sxt        = {1'b0, {8{op_src[7]}},op_src[7:0]};

// Combine short paths toghether to simplify final ALU mux

wire        alu_short_thro = ~(inst_alu[`ALU_AND]   |

                               inst_alu[`ALU_OR]    |

                               inst_alu[`ALU_XOR]   |

                               inst_alu[`ALU_SHIFT] |

                               inst_so[`SWPB]       |

                               inst_so[`SXT]);

wire [16:0] alu_short      = ({16{inst_alu[`ALU_AND]}}   & alu_and)   |

                             ({16{inst_alu[`ALU_OR]}}    & alu_or)    |

                             ({16{inst_alu[`ALU_XOR]}}   & alu_xor)   |

                             ({16{inst_alu[`ALU_SHIFT]}} & alu_shift) |

                             ({16{inst_so[`SWPB]}}       & alu_swpb)  |

                             ({16{inst_so[`SXT]}}        & alu_sxt)   |

                             ({16{alu_short_thro}}       & op_src_in);

// ALU output mux

wire [16:0] alu_out_nxt    = (inst_so[`IRQ] | dbg_halt_st |

                              inst_alu[`ALU_ADD]) ? alu_add_inc :

                              inst_alu[`ALU_DADD] ? alu_dadd    : alu_short;

assign      alu_out        =  alu_out_nxt[15:0];

assign      alu_out_add    =  alu_add[15:0];

//-----------------------------------------------------------------------------

// STATUS FLAG GENERATION

//-----------------------------------------------------------------------------

wire    V_xor       = inst_bw ? (op_src_in[7]  & op_dst_in[7])  :

                                (op_src_in[15] & op_dst_in[15]);

wire    V           = inst_bw ? ((~op_src_in[7]  & ~op_dst_in[7]  &  alu_out[7])  |

                                 ( op_src_in[7]  &  op_dst_in[7]  & ~alu_out[7])) :

                                ((~op_src_in[15] & ~op_dst_in[15] &  alu_out[15]) |

                                 ( op_src_in[15] &  op_dst_in[15] & ~alu_out[15]));

wire    N           = inst_bw ?  alu_out[7]       : alu_out[15];

wire    Z           = inst_bw ? (alu_out[7:0]==0) : (alu_out==0);

wire    C           = inst_bw ?  alu_out[8]       : alu_out_nxt[16];

assign  alu_stat    = inst_alu[`ALU_SHIFT]  ? {1'b0, N,Z,op_src_in[0]} :

                      inst_alu[`ALU_STAT_7] ? {1'b0, N,Z,~Z}           :

                      inst_alu[`ALU_XOR]    ? {V_xor,N,Z,~Z}           : {V,N,Z,C};

assign  alu_stat_wr = (inst_alu[`ALU_STAT_F] & exec_cycle) ? 4'b1111 : 4'b0000;

endmodule // omsp_alu

`include "openMSP430_undefines.v"