Subversion Repositories openmsp430

//----------------------------------------------------------------------------

// Copyright (C) 2001 Authors

//

// This source file may be used and distributed without restriction provided

// that this copyright statement is not removed from the file and that any

// derivative work contains the original copyright notice and the associated

// disclaimer.

//

// This source file is free software; you can redistribute it and/or modify

// it under the terms of the GNU Lesser General Public License as published

// by the Free Software Foundation; either version 2.1 of the License, or

// (at your option) any later version.

//

// This source is distributed in the hope that it will be useful, but WITHOUT

// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

// FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public

// License for more details.

//

// You should have received a copy of the GNU Lesser General Public License

// along with this source; if not, write to the Free Software Foundation,

// Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA

//

//----------------------------------------------------------------------------

// 

// *File Name: tb_openMSP430_fpga.v

// 

// *Module Description:

//                      openMSP430 FPGA testbench

//

// *Author(s):

//              - Olivier Girard,    olgirard@gmail.com

//

//----------------------------------------------------------------------------

// $Rev: 37 $

// $LastChangedBy: olivier.girard $

// $LastChangedDate: 2009-12-29 21:58:14 +0100 (Tue, 29 Dec 2009) $

//----------------------------------------------------------------------------

`include "timescale.v"

`include "openMSP430_defines.v"

module  tb_openMSP430_fpga;

//

// Wire & Register definition

//------------------------------

// Clock & Reset

reg               oscclk;

reg               porst_n;

reg               pbrst_n;

// Slide Switches

reg         [9:0] switch;

// LEDs

wire        [9:0] led;

// UART

reg               uart_rx;

wire              uart_tx;

// Core debug signals

wire   [8*32-1:0] i_state;

wire   [8*32-1:0] e_state;

wire       [31:0] inst_cycle;

wire   [8*32-1:0] inst_full;

wire       [31:0] inst_number;

wire       [15:0] inst_pc;

wire   [8*32-1:0] inst_short;

// Testbench variables

integer           i;

integer           error;

reg               stimulus_done;

wire       [11:0] vout_x;

wire       [11:0] vout_y;

//

// Include files

//------------------------------

// CPU & Memory registers

`include "registers.v"

// Verilog stimulus

`include "stimulus.v"

//

// Initialize Program Memory

//------------------------------

initial

   begin

      // Read memory file

      $readmemh("./pmem.mem", pmem);

      // Update Actel memory banks

      for (i=0; i<512; i=i+1)

        begin

           dut.dmem_hi.dmem_128B_R0C0.MEM_512_9[i] = {1'b0, 8'h00};

           dut.dmem_lo.dmem_128B_R0C0.MEM_512_9[i] = {1'b0, 8'h00};

           dut.pmem_hi.pmem_2kB_R0C0.MEM_512_9[i] = {1'b0, pmem[i*4+3][9:8],   pmem[i*4+2][9:8],   pmem[i*4+1][9:8],   pmem[i*4+0][9:8]};

           dut.pmem_hi.pmem_2kB_R0C1.MEM_512_9[i] = {1'b0, pmem[i*4+3][11:10], pmem[i*4+2][11:10], pmem[i*4+1][11:10], pmem[i*4+0][11:10]};

           dut.pmem_hi.pmem_2kB_R0C2.MEM_512_9[i] = {1'b0, pmem[i*4+3][13:12], pmem[i*4+2][13:12], pmem[i*4+1][13:12], pmem[i*4+0][13:12]};

           dut.pmem_hi.pmem_2kB_R0C3.MEM_512_9[i] = {1'b0, pmem[i*4+3][15:14], pmem[i*4+2][15:14], pmem[i*4+1][15:14], pmem[i*4+0][15:14]};

           dut.pmem_lo.pmem_2kB_R0C0.MEM_512_9[i] = {1'b0, pmem[i*4+3][1:0],   pmem[i*4+2][1:0],   pmem[i*4+1][1:0],   pmem[i*4+0][1:0]};

           dut.pmem_lo.pmem_2kB_R0C1.MEM_512_9[i] = {1'b0, pmem[i*4+3][3:2],   pmem[i*4+2][3:2],   pmem[i*4+1][3:2],   pmem[i*4+0][3:2]};

           dut.pmem_lo.pmem_2kB_R0C2.MEM_512_9[i] = {1'b0, pmem[i*4+3][5:4],   pmem[i*4+2][5:4],   pmem[i*4+1][5:4],   pmem[i*4+0][5:4]};

           dut.pmem_lo.pmem_2kB_R0C3.MEM_512_9[i] = {1'b0, pmem[i*4+3][7:6],   pmem[i*4+2][7:6],   pmem[i*4+1][7:6],   pmem[i*4+0][7:6]};

        end

  end

//

// Generate Clock & Reset

//------------------------------

initial

  begin

     oscclk = 1'b0;

     forever #10.4 oscclk <= ~oscclk; // 48 MHz

  end

initial

  begin

     porst_n       = 1'b1;

     pbrst_n       = 1'b1;

     #100;

     porst_n       = 1'b0;

     pbrst_n       = 1'b0;

     #600;

     porst_n       = 1'b1;

     pbrst_n       = 1'b1;

  end

//

// Global initialization

//------------------------------

initial

  begin

     error         = 0;

     stimulus_done = 1;

     switch        = 10'h000;

     uart_rx       = 1'b0;

  end

//

// openMSP430 FPGA Instance

//----------------------------------

openMSP430_fpga dut (

// OUTPUTs

    .din_x        (din_x),          // SPI Serial Data

    .din_y        (din_y),          // SPI Serial Data

    .led          (led),            // Board LEDs

    .sclk_x       (sclk_x),         // SPI Serial Clock

    .sclk_y       (sclk_y),         // SPI Serial Clock

    .sync_n_x     (sync_n_x),       // SPI Frame synchronization signal (low active)

    .sync_n_y     (sync_n_y),       // SPI Frame synchronization signal (low active)

    .uart_tx      (uart_tx),        // Board UART TX pin

// INPUTs

    .oscclk       (oscclk),         // Board Oscillator (?? MHz)

    .porst_n      (porst_n),        // Board Power-On reset (active low)

    .pbrst_n      (pbrst_n),        // Board Push-Button reset (active low)

    .uart_rx      (uart_rx),        // Board UART RX pin

    .switch       (switch)          // Board Switches

);

//

// 12 BIT DACs

//----------------------------------------

DAC121S101 DAC121S101_x (

// OUTPUTs

    .vout         (vout_x),        // Peripheral data output

// INPUTs

    .din          (din_x),         // SPI Serial Data

    .sclk         (sclk_x),        // SPI Serial Clock

    .sync_n       (sync_n_x)       // SPI Frame synchronization signal (low active)

);

DAC121S101 DAC121S101_y (

// OUTPUTs

    .vout         (vout_y),        // Peripheral data output

// INPUTs

    .din          (din_y),         // SPI Serial Data

    .sclk         (sclk_y),        // SPI Serial Clock

    .sync_n       (sync_n_y)       // SPI Frame synchronization signal (low active)

);

//

// Debug utility signals

//----------------------------------------

msp_debug msp_debug_0 (

// OUTPUTs

    .e_state      (e_state),       // Execution state

    .i_state      (i_state),       // Instruction fetch state

    .inst_cycle   (inst_cycle),    // Cycle number within current instruction

    .inst_full    (inst_full),     // Currently executed instruction (full version)

    .inst_number  (inst_number),   // Instruction number since last system reset

    .inst_pc      (inst_pc),       // Instruction Program counter

    .inst_short   (inst_short),    // Currently executed instruction (short version)

// INPUTs

    .mclk         (mclk),          // Main system clock

    .puc          (puc)            // Main system reset

);

//

// Generate Waveform

//----------------------------------------

initial

  begin

   `ifdef VPD_FILE

     $vcdplusfile("tb_openMSP430_fpga.vpd");

     $vcdpluson();

   `else

     $dumpfile("tb_openMSP430_fpga.vcd");

     $dumpvars(0, tb_openMSP430_fpga);

   `endif

  end

//

// End of simulation

//----------------------------------------

initial // Timeout

  begin

     #500000;

     $display(" ===============================================");

     $display("|               SIMULATION FAILED               |");

     $display("|              (simulation Timeout)             |");

     $display(" ===============================================");

     $finish;

  end

initial // Normal end of test

  begin

     @(inst_pc===16'hffff)

     $display(" ===============================================");

     if (error!=0)

       begin

          $display("|               SIMULATION FAILED               |");

          $display("|     (some verilog stimulus checks failed)     |");

       end

     else if (~stimulus_done)

       begin

          $display("|               SIMULATION FAILED               |");

          $display("|     (the verilog stimulus didn't complete)    |");

       end

     else

       begin

          $display("|               SIMULATION PASSED               |");

       end

     $display(" ===============================================");

     $finish;

  end

//

// Tasks Definition

//------------------------------

   task tb_error;

      input [65*8:0] error_string;

      begin

         $display("ERROR: %s %t", error_string, $time);

         error = error+1;

      end

   endtask

endmodule