Subversion Repositories openmsp430

//----------------------------------------------------------------------------

// Copyright (C) 2001 Authors

//

// Redistribution and use in source and binary forms, with or without

// modification, are permitted provided that the following conditions

// are met:

//     * Redistributions of source code must retain the above copyright

//       notice, this list of conditions and the following disclaimer.

//     * Redistributions in binary form must reproduce the above copyright

//       notice, this list of conditions and the following disclaimer in the

//       documentation and/or other materials provided with the distribution.

//     * Neither the name of the authors nor the names of its contributors

//       may be used to endorse or promote products derived from this software

//       without specific prior written permission.

//

// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE

// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,

// OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF

// THE POSSIBILITY OF SUCH DAMAGE

//

//----------------------------------------------------------------------------

//

// *File Name: dac_spi_if.v

// 

// *Module Description:

//                       SPI interface for National's DAC121S101 12 bit DAC

//

// *Author(s):

//              - Olivier Girard,    olgirard@gmail.com

//

//----------------------------------------------------------------------------

// $Rev: 66 $

// $LastChangedBy: olivier.girard $

// $LastChangedDate: 2010-03-07 09:09:38 +0100 (Sun, 07 Mar 2010) $

//----------------------------------------------------------------------------

module  dac_spi_if (

// OUTPUTs

    cntrl1,                         // Control value 1

    cntrl2,                         // Control value 2

    din,                            // SPI Serial Data

    per_dout,                       // Peripheral data output

    sclk,                           // SPI Serial Clock

    sync_n,                         // SPI Frame synchronization signal (low active)

// INPUTs

    mclk,                           // Main system clock

    per_addr,                       // Peripheral address

    per_din,                        // Peripheral data input

    per_en,                         // Peripheral enable (high active)

    per_we,                         // Peripheral write enable (high active)

    puc                             // Main system reset

);

// PARAMETERs

//============

parameter           SCLK_DIV  = 0;       // Serial clock divider (Tsclk=Tmclk*(SCLK_DIV+1)*2)

parameter           BASE_ADDR = 9'h190;  // Registers base address

// OUTPUTs

//=========

output        [3:0] cntrl1;         // Control value 1

output        [3:0] cntrl2;         // Control value 2

output              din;            // SPI Serial Data

output       [15:0] per_dout;       // Peripheral data output

output              sclk;           // SPI Serial Clock

output              sync_n;         // SPI Frame synchronization signal (low active)

// INPUTs

//=========

input               mclk;           // Main system clock

input         [7:0] per_addr;       // Peripheral address

input        [15:0] per_din;        // Peripheral data input

input               per_en;         // Peripheral enable (high active)

input         [1:0] per_we;         // Peripheral write enable (high active)

input               puc;            // Main system reset

//=============================================================================

// 1)  PARAMETER DECLARATION

//=============================================================================

// Register addresses

parameter           DAC_VAL    = BASE_ADDR;

parameter           DAC_STAT   = BASE_ADDR+2;

parameter           CNTRL1     = BASE_ADDR+4;

parameter           CNTRL2     = BASE_ADDR+6;

// Register one-hot decoder

parameter           DAC_VAL_D  = (512'h1 << DAC_VAL);

parameter           DAC_STAT_D = (512'h1 << DAC_STAT);

parameter           CNTRL1_D   = (512'h1 << CNTRL1);

parameter           CNTRL2_D   = (512'h1 << CNTRL2);

//============================================================================

// 2)  REGISTER DECODER

//============================================================================

// Register address decode

reg  [511:0]  reg_dec;

always @(per_addr)

  case ({per_addr,1'b0})

    DAC_VAL :     reg_dec  =  DAC_VAL_D;

    DAC_STAT:     reg_dec  =  DAC_STAT_D;

    CNTRL1  :     reg_dec  =  CNTRL1_D;

    CNTRL2  :     reg_dec  =  CNTRL2_D;

    default :     reg_dec  =  {512{1'b0}};

  endcase

// Read/Write probes

wire         reg_write =  |per_we   & per_en;

wire         reg_read  = ~|per_we   & per_en;

// Read/Write vectors

wire [511:0] reg_wr    = reg_dec & {512{reg_write}};

wire [511:0] reg_rd    = reg_dec & {512{reg_read}};

//============================================================================

// 3) REGISTERS

//============================================================================

// DAC_VAL Register

//------------------   

reg  [11:0] dac_val;

reg         dac_pd0;

reg         dac_pd1;

wire        dac_val_wr = reg_wr[DAC_VAL];

always @ (posedge mclk or posedge puc)

  if (puc)

    begin

       dac_val <= 12'h000;

       dac_pd0 <=  1'b0;

       dac_pd1 <=  1'b0;

    end

  else if (dac_val_wr)

    begin

       dac_val <=  per_din[11:0];

       dac_pd0 <=  per_din[12];

       dac_pd1 <=  per_din[13];

    end

// CNTRL1 Register

//------------------   

reg   [3:0] cntrl1;

wire        cntrl1_wr = reg_wr[CNTRL1];

always @ (posedge mclk or posedge puc)

  if (puc)            cntrl1 <=  4'h0;

  else if (cntrl1_wr) cntrl1 <=  per_din;

// CNTRL2 Register

//------------------   

reg   [3:0] cntrl2;

wire        cntrl2_wr = reg_wr[CNTRL2];

always @ (posedge mclk or posedge puc)

  if (puc)            cntrl2 <=  4'h0;

  else if (cntrl2_wr) cntrl2 <=  per_din;

//============================================================================

// 4) DATA OUTPUT GENERATION

//============================================================================

// Data output mux

wire [15:0] dac_val_rd  = { 2'b00,   dac_pd1, dac_pd0, dac_val} & {16{reg_rd[DAC_VAL]}};

wire [15:0] dac_stat_rd = {15'h0000, ~sync_n}                   & {16{reg_rd[DAC_STAT]}};

wire [15:0] cntrl1_rd   = {12'h000,  cntrl1}                    & {16{reg_rd[CNTRL1]}};

wire [15:0] cntrl2_rd   = {12'h000,  cntrl2}                    & {16{reg_rd[CNTRL2]}};

wire [15:0] per_dout    =  dac_val_rd   |

                           dac_stat_rd  |

                           cntrl1_rd    |

                           cntrl2_rd;

//============================================================================

// 5) SPI INTERFACE

//============================================================================

// SPI Clock divider

reg [3:0] spi_clk_div;

always @ (posedge mclk or posedge puc)

  if (puc)                 spi_clk_div <=  SCLK_DIV;

  else if (spi_clk_div==0) spi_clk_div <=  SCLK_DIV;

  else                     spi_clk_div <=  spi_clk_div-1;

// SPI Clock generation

reg       sclk;

always @ (posedge mclk or posedge puc)

  if (puc)                 sclk        <=  1'b0;

  else if (spi_clk_div==0) sclk        <=  ~sclk;

wire      sclk_re = (spi_clk_div==0) & ~sclk;

// SPI Transfer trigger

reg       spi_tfx_trig;

always @ (posedge mclk or posedge puc)

  if (puc)                   spi_tfx_trig <= 1'b0;

  else if (dac_val_wr)       spi_tfx_trig <= 1'b1;

  else if (sclk_re & sync_n) spi_tfx_trig <= 1'b0;

wire      spi_tfx_init = spi_tfx_trig & sync_n;

// Data counter

reg [3:0] spi_cnt;

wire      spi_cnt_done = (spi_cnt==4'hf);

always @ (posedge mclk or posedge puc)

  if (puc)                   spi_cnt <=  4'hf;

  else if (sclk_re)

    if (spi_tfx_init)        spi_cnt <=  4'he;

    else if (~spi_cnt_done)  spi_cnt <=  spi_cnt-1;

// Frame synchronization signal (low active)

reg sync_n;

always @ (posedge mclk or posedge puc)

  if (puc)                   sync_n  <=  1'b1;

  else if (sclk_re)

    if (spi_tfx_init)        sync_n  <=  1'b0;

    else if (spi_cnt_done)   sync_n  <=  1'b1;

// Value to be shifted_out

reg  [15:0] dac_shifter;

always @ (posedge mclk or posedge puc)

  if (puc)            dac_shifter <=  16'h000;

  else if (sclk_re)

    if (spi_tfx_init) dac_shifter <=  {2'b00, dac_pd1, dac_pd0, dac_val[11:0]};

    else              dac_shifter <=  {dac_shifter[14:0], 1'b0};

assign din = dac_shifter[15];

endmodule // dac_spi_if