Subversion Repositories openmsp430

//----------------------------------------------------------------------------

// Copyright (C) 2009 , Olivier Girard

//

// Redistribution and use in source and binary forms, with or without

// modification, are permitted provided that the following conditions

// are met:

//     * Redistributions of source code must retain the above copyright

//       notice, this list of conditions and the following disclaimer.

//     * Redistributions in binary form must reproduce the above copyright

//       notice, this list of conditions and the following disclaimer in the

//       documentation and/or other materials provided with the distribution.

//     * Neither the name of the authors nor the names of its contributors

//       may be used to endorse or promote products derived from this software

//       without specific prior written permission.

//

// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE

// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,

// OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF

// THE POSSIBILITY OF SUCH DAMAGE

//

//----------------------------------------------------------------------------

//

// *File Name: omsp_watchdog.v

// 

// *Module Description:

//                       Watchdog Timer

//

// *Author(s):

//              - Olivier Girard,    olgirard@gmail.com

//

//----------------------------------------------------------------------------

// $Rev: 103 $

// $LastChangedBy: olivier.girard $

// $LastChangedDate: 2011-03-05 15:44:48 +0100 (Sat, 05 Mar 2011) $

//----------------------------------------------------------------------------

`ifdef OMSP_NO_INCLUDE

`else

`include "openMSP430_defines.v"

`endif

module  omsp_watchdog (

// OUTPUTs

    per_dout,                       // Peripheral data output

    wdt_irq,                        // Watchdog-timer interrupt

    wdt_reset,                      // Watchdog-timer reset

    wdt_wkup,                       // Watchdog Wakeup

    wdtifg,                         // Watchdog-timer interrupt flag

    wdtnmies,                       // Watchdog-timer NMI edge selection

// INPUTs

    aclk,                           // ACLK

    aclk_en,                        // ACLK enable

    dbg_freeze,                     // Freeze Watchdog counter

    mclk,                           // Main system clock

    per_addr,                       // Peripheral address

    per_din,                        // Peripheral data input

    per_en,                         // Peripheral enable (high active)

    per_we,                         // Peripheral write enable (high active)

    por,                            // Power-on reset

    puc_rst,                        // Main system reset

    scan_enable,                    // Scan enable (active during scan shifting)

    scan_mode,                      // Scan mode

    smclk,                          // SMCLK

    smclk_en,                       // SMCLK enable

    wdtie,                          // Watchdog timer interrupt enable

    wdtifg_irq_clr,                 // Watchdog-timer interrupt flag irq accepted clear

    wdtifg_sw_clr,                  // Watchdog-timer interrupt flag software clear

    wdtifg_sw_set                   // Watchdog-timer interrupt flag software set

);

// OUTPUTs

//=========

output       [15:0] per_dout;       // Peripheral data output

output              wdt_irq;        // Watchdog-timer interrupt

output              wdt_reset;      // Watchdog-timer reset

output              wdt_wkup;       // Watchdog Wakeup

output              wdtifg;         // Watchdog-timer interrupt flag

output              wdtnmies;       // Watchdog-timer NMI edge selection

// INPUTs

//=========

input               aclk;           // ACLK

input               aclk_en;        // ACLK enable

input               dbg_freeze;     // Freeze Watchdog counter

input               mclk;           // Main system clock

input        [13:0] per_addr;       // Peripheral address

input        [15:0] per_din;        // Peripheral data input

input               per_en;         // Peripheral enable (high active)

input         [1:0] per_we;         // Peripheral write enable (high active)

input               por;            // Power-on reset

input               puc_rst;        // Main system reset

input               scan_enable;    // Scan enable (active during scan shifting)

input               scan_mode;      // Scan mode

input               smclk;          // SMCLK

input               smclk_en;       // SMCLK enable

input               wdtie;          // Watchdog timer interrupt enable

input               wdtifg_irq_clr; // Clear Watchdog-timer interrupt flag

input               wdtifg_sw_clr;  // Watchdog-timer interrupt flag software clear

input               wdtifg_sw_set;  // Watchdog-timer interrupt flag software set

//=============================================================================

// 1)  PARAMETER DECLARATION

//=============================================================================

// Register base address (must be aligned to decoder bit width)

parameter       [14:0] BASE_ADDR   = 15'h0120;

// Decoder bit width (defines how many bits are considered for address decoding)

parameter              DEC_WD      =  2;

// Register addresses offset

parameter [DEC_WD-1:0] WDTCTL      = 'h0;

// Register one-hot decoder utilities

parameter              DEC_SZ      =  (1 << DEC_WD);

parameter [DEC_SZ-1:0] BASE_REG    =  {{DEC_SZ-1{1'b0}}, 1'b1};

// Register one-hot decoder

parameter [DEC_SZ-1:0] WDTCTL_D    = (BASE_REG << WDTCTL);

//============================================================================

// 2)  REGISTER DECODER

//============================================================================

// Local register selection

wire              reg_sel   =  per_en & (per_addr[13:DEC_WD-1]==BASE_ADDR[14:DEC_WD]);

// Register local address

wire [DEC_WD-1:0] reg_addr  =  {per_addr[DEC_WD-2:0], 1'b0};

// Register address decode

wire [DEC_SZ-1:0] reg_dec   =  (WDTCTL_D & {DEC_SZ{(reg_addr==WDTCTL)}});

// Read/Write probes

wire              reg_write =  |per_we & reg_sel;

wire              reg_read  = ~|per_we & reg_sel;

// Read/Write vectors

wire [DEC_SZ-1:0] reg_wr    = reg_dec & {DEC_SZ{reg_write}};

wire [DEC_SZ-1:0] reg_rd    = reg_dec & {DEC_SZ{reg_read}};

//============================================================================

// 3) REGISTERS

//============================================================================

// WDTCTL Register

//-----------------

// WDTNMI is not implemented and therefore masked

reg  [7:0] wdtctl;

wire       wdtctl_wr = reg_wr[WDTCTL];

`ifdef CLOCK_GATING

wire       mclk_wdtctl;

omsp_clock_gate clock_gate_wdtctl (.gclk(mclk_wdtctl),

                                   .clk (mclk), .enable(wdtctl_wr), .scan_enable(scan_enable));

`else

wire       mclk_wdtctl = mclk;

`endif

`ifdef NMI

parameter [7:0] WDTNMIES_MASK = 8'h40;

`else

parameter [7:0] WDTNMIES_MASK = 8'h00;

`endif

`ifdef ASIC_CLOCKING

  `ifdef WATCHDOG_MUX

parameter [7:0] WDTSSEL_MASK  = 8'h04;

  `else

parameter [7:0] WDTSSEL_MASK  = 8'h00;

  `endif

`else

parameter [7:0] WDTSSEL_MASK  = 8'h04;

`endif

parameter [7:0] WDTCTL_MASK   = (8'b1001_0011 | WDTSSEL_MASK | WDTNMIES_MASK);

always @ (posedge mclk_wdtctl or posedge puc_rst)

  if (puc_rst)        wdtctl <=  8'h00;

`ifdef CLOCK_GATING

  else                wdtctl <=  per_din[7:0] & WDTCTL_MASK;

`else

  else if (wdtctl_wr) wdtctl <=  per_din[7:0] & WDTCTL_MASK;

`endif

wire       wdtpw_error = wdtctl_wr & (per_din[15:8]!=8'h5a);

wire       wdttmsel    = wdtctl[4];

wire       wdtnmies    = wdtctl[6];

//============================================================================

// 4) DATA OUTPUT GENERATION

//============================================================================

`ifdef NMI

parameter [7:0] WDTNMI_RD_MASK  = 8'h20;

`else

parameter [7:0] WDTNMI_RD_MASK  = 8'h00;

`endif

`ifdef WATCHDOG_MUX

parameter [7:0] WDTSSEL_RD_MASK = 8'h00;

`else

  `ifdef WATCHDOG_NOMUX_ACLK

parameter [7:0] WDTSSEL_RD_MASK = 8'h04;

  `else

parameter [7:0] WDTSSEL_RD_MASK = 8'h00;

  `endif

`endif

parameter [7:0] WDTCTL_RD_MASK  = WDTNMI_RD_MASK | WDTSSEL_RD_MASK;

// Data output mux

wire [15:0] wdtctl_rd  = {8'h69, wdtctl | WDTCTL_RD_MASK} & {16{reg_rd[WDTCTL]}};

wire [15:0] per_dout   =  wdtctl_rd;

//=============================================================================

// 5)  WATCHDOG TIMER (ASIC IMPLEMENTATION)

//=============================================================================

`ifdef ASIC_CLOCKING

// Watchdog clock source selection

//---------------------------------

wire wdt_clk;

`ifdef WATCHDOG_MUX

omsp_clock_mux clock_mux_watchdog (

   .clk_out   (wdt_clk),

   .clk_in0   (smclk),

   .clk_in1   (aclk),

   .reset     (puc_rst),

   .scan_mode (scan_mode),

   .select    (wdtctl[2])

);

`else

  `ifdef WATCHDOG_NOMUX_ACLK

     assign wdt_clk =  aclk;

  `else

     assign wdt_clk =  smclk;

  `endif

`endif

// Reset synchronizer for the watchdog local clock domain

//--------------------------------------------------------

wire wdt_rst_noscan;

wire wdt_rst;

// Reset Synchronizer

omsp_sync_reset sync_reset_por (

    .rst_s        (wdt_rst_noscan),

    .clk          (wdt_clk),

    .rst_a        (puc_rst)

);

// Scan Reset Mux

omsp_scan_mux scan_mux_wdt_rst (

    .scan_mode    (scan_mode),

    .data_in_scan (puc_rst),

    .data_in_func (wdt_rst_noscan),

    .data_out     (wdt_rst)

);

// Watchog counter clear (synchronization)

//-----------------------------------------

// Toggle bit whenever the watchog needs to be cleared

reg        wdtcnt_clr_toggle;

wire       wdtcnt_clr_detect = (wdtctl_wr & per_din[3]);

always @ (posedge mclk or posedge puc_rst)

  if (puc_rst)                wdtcnt_clr_toggle <= 1'b0;

  else if (wdtcnt_clr_detect) wdtcnt_clr_toggle <= ~wdtcnt_clr_toggle;

// Synchronization

wire wdtcnt_clr_sync;

omsp_sync_cell sync_cell_wdtcnt_clr (

    .data_out  (wdtcnt_clr_sync),

    .data_in   (wdtcnt_clr_toggle),

    .clk       (wdt_clk),

    .rst       (wdt_rst)

);

// Edge detection

reg wdtcnt_clr_sync_dly;

always @ (posedge wdt_clk or posedge wdt_rst)

  if (wdt_rst)  wdtcnt_clr_sync_dly <= 1'b0;

  else          wdtcnt_clr_sync_dly <= wdtcnt_clr_sync;

wire wdtqn_edge;

wire wdtcnt_clr = (wdtcnt_clr_sync ^ wdtcnt_clr_sync_dly) | wdtqn_edge;

// Watchog counter increment (synchronization)

//----------------------------------------------

wire wdtcnt_incr;

omsp_sync_cell sync_cell_wdtcnt_incr (

    .data_out  (wdtcnt_incr),

    .data_in   (~wdtctl[7] & ~dbg_freeze),

    .clk       (wdt_clk),

    .rst       (wdt_rst)

);

// Watchdog 16 bit counter

//--------------------------

reg  [15:0] wdtcnt;

wire [15:0] wdtcnt_nxt  = wdtcnt+16'h0001;

`ifdef CLOCK_GATING

wire       wdtcnt_en   = wdtcnt_clr | wdtcnt_incr;

wire       wdt_clk_cnt;

omsp_clock_gate clock_gate_wdtcnt (.gclk(wdt_clk_cnt),

                                   .clk (wdt_clk), .enable(wdtcnt_en), .scan_enable(scan_enable));

`else

wire       wdt_clk_cnt = wdt_clk;

`endif

always @ (posedge wdt_clk_cnt or posedge wdt_rst)

  if (wdt_rst)           wdtcnt <= 16'h0000;

  else if (wdtcnt_clr)   wdtcnt <= 16'h0000;

`ifdef CLOCK_GATING

  else                   wdtcnt <= wdtcnt_nxt;

`else

  else if (wdtcnt_incr)  wdtcnt <= wdtcnt_nxt;

`endif

// Local synchronizer for the wdtctl.WDTISx

// configuration (note that we can live with

// a full bus synchronizer as it won't hurt

// if we get a wrong WDTISx value for a

// single clock cycle)

//--------------------------------------------

reg [1:0] wdtisx_s;

reg [1:0] wdtisx_ss;

always @ (posedge wdt_clk_cnt or posedge wdt_rst)

  if (wdt_rst)

    begin

       wdtisx_s  <=  2'h0;

       wdtisx_ss <=  2'h0;

    end

  else

    begin

       wdtisx_s  <=  wdtctl[1:0];

       wdtisx_ss <=  wdtisx_s;

    end

// Interval selection mux

//--------------------------

reg        wdtqn;

always @(wdtisx_ss or wdtcnt_nxt)

    case(wdtisx_ss)

      2'b00  : wdtqn =  wdtcnt_nxt[15];

      2'b01  : wdtqn =  wdtcnt_nxt[13];

      2'b10  : wdtqn =  wdtcnt_nxt[9];

      default: wdtqn =  wdtcnt_nxt[6];

    endcase

// Watchdog event detection

//-----------------------------

// Interval end detection

assign     wdtqn_edge =  (wdtqn & wdtcnt_incr);

// Toggle bit for the transmition to the MCLK domain

reg        wdt_evt_toggle;

always @ (posedge wdt_clk_cnt or posedge wdt_rst)

  if (wdt_rst)         wdt_evt_toggle <= 1'b0;

  else if (wdtqn_edge) wdt_evt_toggle <= ~wdt_evt_toggle;

// Synchronize in the MCLK domain

wire       wdt_evt_toggle_sync;

omsp_sync_cell sync_cell_wdt_evt (

    .data_out  (wdt_evt_toggle_sync),

    .data_in   (wdt_evt_toggle),

    .clk       (mclk),

    .rst       (puc_rst)

);

// Delay for edge detection of the toggle bit

reg        wdt_evt_toggle_sync_dly;

always @ (posedge mclk or posedge puc_rst)

  if (puc_rst) wdt_evt_toggle_sync_dly <= 1'b0;

  else         wdt_evt_toggle_sync_dly <= wdt_evt_toggle_sync;

wire       wdtifg_evt =  (wdt_evt_toggle_sync_dly ^ wdt_evt_toggle_sync) | wdtpw_error;

// Watchdog wakeup generation

//-------------------------------------------------------------

// Clear wakeup when the watchdog flag is cleared (glitch free)

reg  wdtifg_clr_reg;

wire wdtifg_clr;

always @ (posedge mclk or posedge puc_rst)

  if (puc_rst) wdtifg_clr_reg <= 1'b1;

  else         wdtifg_clr_reg <= wdtifg_clr;

// Set wakeup when the watchdog event is detected (glitch free)

reg  wdtqn_edge_reg;

always @ (posedge wdt_clk_cnt or posedge wdt_rst)

  if (wdt_rst) wdtqn_edge_reg <= 1'b0;

  else         wdtqn_edge_reg <= wdtqn_edge;

// Watchdog wakeup cell

wire wdt_wkup_pre;

omsp_wakeup_cell wakeup_cell_wdog (

                                   .wkup_out   (wdt_wkup_pre),    // Wakup signal (asynchronous)

                                   .scan_clk   (mclk),            // Scan clock

                                   .scan_mode  (scan_mode),       // Scan mode

                                   .scan_rst   (puc_rst),         // Scan reset

                                   .wkup_clear (wdtifg_clr_reg),  // Glitch free wakeup event clear

                                   .wkup_event (wdtqn_edge_reg)   // Glitch free asynchronous wakeup event

);

// When not in HOLD, the watchdog can generate a wakeup when:

//     - in interval mode (if interrupts are enabled)

//     - in reset mode (always)

reg  wdt_wkup_en;

always @ (posedge mclk or posedge puc_rst)

  if (puc_rst) wdt_wkup_en <= 1'b0;

  else         wdt_wkup_en <= ~wdtctl[7] & (~wdttmsel | (wdttmsel & wdtie));

// Make wakeup when not enabled

wire wdt_wkup;

omsp_and_gate and_wdt_wkup (.y(wdt_wkup), .a(wdt_wkup_pre), .b(wdt_wkup_en));

// Watchdog interrupt flag

//------------------------------

reg        wdtifg;

wire       wdtifg_set =  wdtifg_evt                  |  wdtifg_sw_set;

assign     wdtifg_clr =  (wdtifg_irq_clr & wdttmsel) |  wdtifg_sw_clr;

always @ (posedge mclk or posedge por)

  if (por)             wdtifg <=  1'b0;

  else if (wdtifg_set) wdtifg <=  1'b1;

  else if (wdtifg_clr) wdtifg <=  1'b0;

// Watchdog interrupt generation

//---------------------------------

wire    wdt_irq       = wdttmsel & wdtifg & wdtie;

// Watchdog reset generation

//-----------------------------

reg     wdt_reset;

always @ (posedge mclk or posedge por)

  if (por) wdt_reset <= 1'b0;

  else     wdt_reset <= wdtpw_error | (wdtifg_set & ~wdttmsel);

//=============================================================================

// 6)  WATCHDOG TIMER (FPGA IMPLEMENTATION)

//=============================================================================

`else

// Watchdog clock source selection

//---------------------------------

wire  clk_src_en = wdtctl[2] ? aclk_en : smclk_en;

// Watchdog 16 bit counter

//--------------------------

reg [15:0] wdtcnt;

wire        wdtifg_evt;

wire        wdtcnt_clr  = (wdtctl_wr & per_din[3]) | wdtifg_evt;

wire        wdtcnt_incr = ~wdtctl[7] & clk_src_en & ~dbg_freeze;

wire [15:0] wdtcnt_nxt  = wdtcnt+16'h0001;

always @ (posedge mclk or posedge puc_rst)

  if (puc_rst)           wdtcnt <= 16'h0000;

  else if (wdtcnt_clr)   wdtcnt <= 16'h0000;

  else if (wdtcnt_incr)  wdtcnt <= wdtcnt_nxt;

// Interval selection mux

//--------------------------

reg        wdtqn;

always @(wdtctl or wdtcnt_nxt)

    case(wdtctl[1:0])

      2'b00  : wdtqn =  wdtcnt_nxt[15];

      2'b01  : wdtqn =  wdtcnt_nxt[13];

      2'b10  : wdtqn =  wdtcnt_nxt[9];

      default: wdtqn =  wdtcnt_nxt[6];

    endcase

// Watchdog event detection

//-----------------------------

assign     wdtifg_evt =  (wdtqn & wdtcnt_incr) | wdtpw_error;

// Watchdog interrupt flag

//------------------------------

reg        wdtifg;

wire       wdtifg_set =  wdtifg_evt                  |  wdtifg_sw_set;

wire       wdtifg_clr =  (wdtifg_irq_clr & wdttmsel) |  wdtifg_sw_clr;

always @ (posedge mclk or posedge por)

  if (por)             wdtifg <=  1'b0;

  else if (wdtifg_set) wdtifg <=  1'b1;

  else if (wdtifg_clr) wdtifg <=  1'b0;

// Watchdog interrupt generation

//---------------------------------

wire    wdt_irq       = wdttmsel & wdtifg & wdtie;

wire    wdt_wkup      =  1'b0;

// Watchdog reset generation

//-----------------------------

reg     wdt_reset;

always @ (posedge mclk or posedge por)

  if (por) wdt_reset <= 1'b0;

  else     wdt_reset <= wdtpw_error | (wdtifg_set & ~wdttmsel);

`endif

endmodule // omsp_watchdog

`ifdef OMSP_NO_INCLUDE

`else

`include "openMSP430_undefines.v"

`endif