Subversion Repositories openmsp430

//----------------------------------------------------------------------------

// Copyright (C) 2009 Authors

//

// Redistribution and use in source and binary forms, with or without

// modification, are permitted provided that the following conditions

// are met:

//     * Redistributions of source code must retain the above copyright

//       notice, this list of conditions and the following disclaimer.

//     * Redistributions in binary form must reproduce the above copyright

//       notice, this list of conditions and the following disclaimer in the

//       documentation and/or other materials provided with the distribution.

//     * Neither the name of the authors nor the names of its contributors

//       may be used to endorse or promote products derived from this software

//       without specific prior written permission.

//

// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE

// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,

// OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF

// THE POSSIBILITY OF SUCH DAMAGE

//

//----------------------------------------------------------------------------

//

// *File Name: template_periph_8b.v

// 

// *Module Description:

//                       8 bit peripheral template.

//

// *Author(s):

//              - Olivier Girard,    olgirard@gmail.com

//

//----------------------------------------------------------------------------

// $Rev: 74 $

// $LastChangedBy: olivier.girard $

// $LastChangedDate: 2010-08-28 21:53:08 +0200 (Sat, 28 Aug 2010) $

//----------------------------------------------------------------------------

`include "timescale.v"

`include "openMSP430_defines.v"

module  template_periph_8b (

// OUTPUTs

    per_dout,                       // Peripheral data output

// INPUTs

    mclk,                           // Main system clock

    per_addr,                       // Peripheral address

    per_din,                        // Peripheral data input

    per_en,                         // Peripheral enable (high active)

    per_wen,                        // Peripheral write enable (high active)

    puc                             // Main system reset

);

// OUTPUTs

//=========

output      [15:0] per_dout;        // Peripheral data output

// INPUTs

//=========

input              mclk;            // Main system clock

input        [7:0] per_addr;        // Peripheral address

input       [15:0] per_din;         // Peripheral data input

input              per_en;          // Peripheral enable (high active)

input        [1:0] per_wen;         // Peripheral write enable (high active)

input              puc;             // Main system reset

//=============================================================================

// 1)  PARAMETER DECLARATION

//=============================================================================

// Register addresses

parameter          CNTRL1    = 9'h090;

parameter          CNTRL2    = 9'h091;

parameter          CNTRL3    = 9'h092;

parameter          CNTRL4    = 9'h093;

// Register one-hot decoder

parameter          CNTRL1_D  = (256'h1 << (CNTRL1 /2));

parameter          CNTRL2_D  = (256'h1 << (CNTRL2 /2));

parameter          CNTRL3_D  = (256'h1 << (CNTRL3 /2));

parameter          CNTRL4_D  = (256'h1 << (CNTRL4 /2));

//============================================================================

// 2)  REGISTER DECODER

//============================================================================

// Register address decode

reg  [255:0]  reg_dec;

always @(per_addr)

  case (per_addr)

    (CNTRL1 /2):   reg_dec   = CNTRL1_D;

    (CNTRL2 /2):   reg_dec   = CNTRL2_D;

    (CNTRL3 /2):   reg_dec   = CNTRL3_D;

    (CNTRL4 /2):   reg_dec   = CNTRL4_D;

    default    :   reg_dec   = {256{1'b0}};

  endcase

// Read/Write probes

wire         reg_lo_write =  per_wen[0] & per_en;

wire         reg_hi_write =  per_wen[1] & per_en;

wire         reg_read     = ~|per_wen   & per_en;

// Read/Write vectors

wire [255:0] reg_hi_wr    = reg_dec & {256{reg_hi_write}};

wire [255:0] reg_lo_wr    = reg_dec & {256{reg_lo_write}};

wire [255:0] reg_rd       = reg_dec & {256{reg_read}};

//============================================================================

// 3) REGISTERS

//============================================================================

// CNTRL1 Register

//-----------------

reg  [7:0] cntrl1;

wire       cntrl1_wr  = CNTRL1[0] ? reg_hi_wr[CNTRL1/2] : reg_lo_wr[CNTRL1/2];

wire [7:0] cntrl1_nxt = CNTRL1[0] ? per_din[15:8]       : per_din[7:0];

always @ (posedge mclk or posedge puc)

  if (puc)            cntrl1 <=  8'h00;

  else if (cntrl1_wr) cntrl1 <=  cntrl1_nxt;

// CNTRL2 Register

//-----------------

reg  [7:0] cntrl2;

wire       cntrl2_wr  = CNTRL2[0] ? reg_hi_wr[CNTRL2/2] : reg_lo_wr[CNTRL2/2];

wire [7:0] cntrl2_nxt = CNTRL2[0] ? per_din[15:8]       : per_din[7:0];

always @ (posedge mclk or posedge puc)

  if (puc)            cntrl2 <=  8'h00;

  else if (cntrl2_wr) cntrl2 <=  cntrl2_nxt;

// CNTRL3 Register

//-----------------

reg  [7:0] cntrl3;

wire       cntrl3_wr  = CNTRL3[0] ? reg_hi_wr[CNTRL3/2] : reg_lo_wr[CNTRL3/2];

wire [7:0] cntrl3_nxt = CNTRL3[0] ? per_din[15:8]       : per_din[7:0];

always @ (posedge mclk or posedge puc)

  if (puc)            cntrl3 <=  8'h00;

  else if (cntrl3_wr) cntrl3 <=  cntrl3_nxt;

// CNTRL4 Register

//-----------------

reg  [7:0] cntrl4;

wire       cntrl4_wr  = CNTRL4[0] ? reg_hi_wr[CNTRL4/2] : reg_lo_wr[CNTRL4/2];

wire [7:0] cntrl4_nxt = CNTRL4[0] ? per_din[15:8]       : per_din[7:0];

always @ (posedge mclk or posedge puc)

  if (puc)            cntrl4 <=  8'h00;

  else if (cntrl4_wr) cntrl4 <=  cntrl4_nxt;

//============================================================================

// 4) DATA OUTPUT GENERATION

//============================================================================

// Data output mux

wire [15:0] cntrl1_rd   = (cntrl1  & {8{reg_rd[CNTRL1/2]}})  << (8 & {4{CNTRL1[0]}});

wire [15:0] cntrl2_rd   = (cntrl2  & {8{reg_rd[CNTRL2/2]}})  << (8 & {4{CNTRL2[0]}});

wire [15:0] cntrl3_rd   = (cntrl3  & {8{reg_rd[CNTRL3/2]}})  << (8 & {4{CNTRL3[0]}});

wire [15:0] cntrl4_rd   = (cntrl4  & {8{reg_rd[CNTRL4/2]}})  << (8 & {4{CNTRL4[0]}});

wire [15:0] per_dout  =  cntrl1_rd  |

                         cntrl2_rd  |

                         cntrl3_rd  |

                         cntrl4_rd;

endmodule // template_periph_8b

`include "openMSP430_undefines.v"