Subversion Repositories openmsp430

//----------------------------------------------------------------------------

// Copyright (C) 2001 Authors

//

// This source file may be used and distributed without restriction provided

// that this copyright statement is not removed from the file and that any

// derivative work contains the original copyright notice and the associated

// disclaimer.

//

// This source file is free software; you can redistribute it and/or modify

// it under the terms of the GNU Lesser General Public License as published

// by the Free Software Foundation; either version 2.1 of the License, or

// (at your option) any later version.

//

// This source is distributed in the hope that it will be useful, but WITHOUT

// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

// FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public

// License for more details.

//

// You should have received a copy of the GNU Lesser General Public License

// along with this source; if not, write to the Free Software Foundation,

// Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA

//

//----------------------------------------------------------------------------

// 

// *File Name: tb_openMSP430_fpga.v

// 

// *Module Description:

//                      openMSP430 FPGA testbench

//

// *Author(s):

//              - Olivier Girard,    olgirard@gmail.com

//

//----------------------------------------------------------------------------

// $Rev: 111 $

// $LastChangedBy: olivier.girard $

// $LastChangedDate: 2011-05-20 22:39:02 +0200 (Fri, 20 May 2011) $

//----------------------------------------------------------------------------

`include "timescale.v"

`ifdef OMSP_NO_INCLUDE

`else

`include "openMSP430_defines.v"

`endif

module  tb_openMSP430_fpga;

//

// Wire & Register definition

//------------------------------

// Clock & Reset

reg               CLK_40MHz;

reg               CLK_66MHz;

reg               CLK_100MHz;

reg               USER_RESET;

// Slide Switches

reg               SW4;

reg               SW3;

reg               SW2;

reg               SW1;

// LEDs

wire              LED4;

wire              LED3;

wire              LED2;

wire              LED1;

// UART

reg               UART_RXD;

wire              UART_TXD;

// UART

wire              PMOD1_P1;

reg               PMOD1_P4;

// Core debug signals

wire   [8*32-1:0] i_state;

wire   [8*32-1:0] e_state;

wire       [31:0] inst_cycle;

wire   [8*32-1:0] inst_full;

wire       [31:0] inst_number;

wire       [15:0] inst_pc;

wire   [8*32-1:0] inst_short;

// Testbench variables

integer           i;

integer           error;

reg               stimulus_done;

//

// Include files

//------------------------------

// CPU & Memory registers

`include "registers.v"

// Verilog stimulus

`include "stimulus.v"

//

// Initialize Program Memory

//------------------------------

initial

   begin

      // Read memory file

      #10 $readmemh("./pmem.mem", pmem);

      // Update Xilinx memory banks

      for (i=0; i<2048; i=i+1)

        begin

           dut.ram_16x2k_pmem.ram_inst.mem[i] = pmem[i];

        end

  end

//

// Generate Clock & Reset

//------------------------------

initial

  begin

     CLK_40MHz = 1'b0;

     forever #12.5 CLK_40MHz <= ~CLK_40MHz; // 40 MHz

  end

initial

  begin

     CLK_66MHz = 1'b0;

     forever #7.57 CLK_66MHz <= ~CLK_66MHz;   // 66 MHz

  end

initial

  begin

     CLK_100MHz = 1'b0;

     forever #5 CLK_100MHz <= ~CLK_100MHz;  // 100 MHz

  end

initial

  begin

     USER_RESET         = 1'b0;

     #100 USER_RESET    = 1'b1;

     #600 USER_RESET    = 1'b0;

  end

//

// Global initialization

//------------------------------

initial

  begin

     error         = 0;

     stimulus_done = 1;

     SW4           = 1'b0;  // Slide Switches

     SW3           = 1'b0;

     SW2           = 1'b0;

     SW1           = 1'b0;

     UART_RXD      = 1'b1;  // UART

     PMOD1_P4      = 1'b1;

  end

//

// openMSP430 FPGA Instance

//----------------------------------

openMSP430_fpga dut (

     //----------------------------------------------

     // User Reset Push Button

     //----------------------------------------------

     .USER_RESET      (USER_RESET),

     //----------------------------------------------

     // Micron N25Q128 SPI Flash

     //   This is a Multi-I/O Flash.  Several pins

     //  have dual purposes depending on the mode.

     //----------------------------------------------

     .SPI_SCK         (),

     .SPI_CS_n        (),

     .SPI_MOSI_MISO0  (),

     .SPI_MISO_MISO1  (),

     .SPI_Wn_MISO2    (),

     .SPI_HOLDn_MISO3 (),

     //----------------------------------------------

     // TI CDCE913 Triple-Output PLL Clock Chip

     //   Y1: 40 MHz, USER_CLOCK can be used as

     //              external configuration clock

     //   Y2: 66.667 MHz

     //   Y3: 100 MHz 

     //----------------------------------------------

     .USER_CLOCK      (CLK_40MHz),

     .CLOCK_Y2        (CLK_66MHz),

     .CLOCK_Y3        (CLK_100MHz),

     //----------------------------------------------

     // The following oscillator is not populated

     // in production but the footprint is compatible

     // with the Maxim DS1088LU                 

     //----------------------------------------------

     .BACKUP_CLK      (1'b0),

     //----------------------------------------------

     // User DIP Switch x4

     //----------------------------------------------

     .GPIO_DIP1       (SW1),

     .GPIO_DIP2       (SW2),

     .GPIO_DIP3       (SW3),

     .GPIO_DIP4       (SW4),

     //----------------------------------------------

     // User LEDs                       

     //----------------------------------------------

     .GPIO_LED1       (LED1),

     .GPIO_LED2       (LED2),

     .GPIO_LED3       (LED3),

     .GPIO_LED4       (LED4),

     //----------------------------------------------

     // Silicon Labs CP2102 USB-to-UART Bridge Chip

     //----------------------------------------------

     .USB_RS232_RXD   (UART_RXD),

     .USB_RS232_TXD   (UART_TXD),

     //----------------------------------------------

     // Texas Instruments CDCE913 programming port

     //----------------------------------------------

     .SCL             (),

     .SDA             (),

     //----------------------------------------------

     // Micron MT46H32M16LFBF-5 LPDDR                   

     //----------------------------------------------

     // Addresses

     .LPDDR_A0        (),

     .LPDDR_A1        (),

     .LPDDR_A2        (),

     .LPDDR_A3        (),

     .LPDDR_A4        (),

     .LPDDR_A5        (),

     .LPDDR_A6        (),

     .LPDDR_A7        (),

     .LPDDR_A8        (),

     .LPDDR_A9        (),

     .LPDDR_A10       (),

     .LPDDR_A11       (),

     .LPDDR_A12       (),

     .LPDDR_BA0       (),

     .LPDDR_BA1       (),

     // Data                                                                  

     .LPDDR_DQ0       (),

     .LPDDR_DQ1       (),

     .LPDDR_DQ2       (),

     .LPDDR_DQ3       (),

     .LPDDR_DQ4       (),

     .LPDDR_DQ5       (),

     .LPDDR_DQ6       (),

     .LPDDR_DQ7       (),

     .LPDDR_DQ8       (),

     .LPDDR_DQ9       (),

     .LPDDR_DQ10      (),

     .LPDDR_DQ11      (),

     .LPDDR_DQ12      (),

     .LPDDR_DQ13      (),

     .LPDDR_DQ14      (),

     .LPDDR_DQ15      (),

     .LPDDR_LDM       (),

     .LPDDR_UDM       (),

     .LPDDR_LDQS      (),

     .LPDDR_UDQS      (),

     // Clock

     .LPDDR_CK_N      (),

     .LPDDR_CK_P      (),

     .LPDDR_CKE       (),

     // Control

     .LPDDR_CAS_n     (),

     .LPDDR_RAS_n     (),

     .LPDDR_WE_n      (),

     .LPDDR_RZQ       (),

     //----------------------------------------------

     // National Semiconductor DP83848J 10/100 Ethernet PHY                     

     //   Pull-ups on RXD are necessary to set the PHY AD to 11110b.

     //   Must keep the PHY from defaulting to PHY AD = 00000b      

     //   because this is Isolate Mode                              

     //----------------------------------------------

     .ETH_COL         (1'b0),

     .ETH_CRS         (1'b0),

     .ETH_MDC         (),

     .ETH_MDIO        (),

     .ETH_RESET_n     (),

     .ETH_RX_CLK      (1'b0),

     .ETH_RX_D0       (1'b0),

     .ETH_RX_D1       (1'b0),

     .ETH_RX_D2       (1'b0),

     .ETH_RX_D3       (1'b0),

     .ETH_RX_DV       (1'b0),

     .ETH_RX_ER       (1'b0),

     .ETH_TX_CLK      (1'b0),

     .ETH_TX_D0       (),

     .ETH_TX_D1       (),

     .ETH_TX_D2       (),

     .ETH_TX_D3       (),

     .ETH_TX_EN       (),

     //----------------------------------------------

     // Peripheral Modules (PMODs) and GPIO

     //     https://www.digilentinc.com/PMODs

     //----------------------------------------------

     // Connector J5

     .PMOD1_P1        (PMOD1_P1),    // Serial Debug Interface TX

     .PMOD1_P2        (),

     .PMOD1_P3        (),

     .PMOD1_P4        (PMOD1_P4),    // Serial Debug Interface RX

     .PMOD1_P7        (),

     .PMOD1_P8        (),

     .PMOD1_P9        (),

     .PMOD1_P10       (),

     // Connector J4

     .PMOD2_P1        (),

     .PMOD2_P2        (),

     .PMOD2_P3        (),

     .PMOD2_P4        (),

     .PMOD2_P7        (),

     .PMOD2_P8        (),

     .PMOD2_P9        (),

     .PMOD2_P10       ()

);

// Debug utility signals

//----------------------------------------

msp_debug msp_debug_0 (

// OUTPUTs

    .e_state      (e_state),       // Execution state

    .i_state      (i_state),       // Instruction fetch state

    .inst_cycle   (inst_cycle),    // Cycle number within current instruction

    .inst_full    (inst_full),     // Currently executed instruction (full version)

    .inst_number  (inst_number),   // Instruction number since last system reset

    .inst_pc      (inst_pc),       // Instruction Program counter

    .inst_short   (inst_short),    // Currently executed instruction (short version)

// INPUTs

    .mclk         (mclk),          // Main system clock

    .puc_rst      (puc_rst)        // Main system reset

);

//

// Generate Waveform

//----------------------------------------

initial

  begin

   `ifdef VPD_FILE

     $vcdplusfile("tb_openMSP430_fpga.vpd");

     $vcdpluson();

   `else

     `ifdef TRN_FILE

        $recordfile ("tb_openMSP430_fpga.trn");

        $recordvars;

     `else

        $dumpfile("tb_openMSP430_fpga.vcd");

        $dumpvars(0, tb_openMSP430_fpga);

     `endif

   `endif

  end

//

// End of simulation

//----------------------------------------

initial // Timeout

  begin

     #500000;

     $display(" ===============================================");

     $display("|               SIMULATION FAILED               |");

     $display("|              (simulation Timeout)             |");

     $display(" ===============================================");

     $finish;

  end

initial // Normal end of test

  begin

     @(inst_pc===16'hffff)

     $display(" ===============================================");

     if (error!=0)

       begin

          $display("|               SIMULATION FAILED               |");

          $display("|     (some verilog stimulus checks failed)     |");

       end

     else if (~stimulus_done)

       begin

          $display("|               SIMULATION FAILED               |");

          $display("|     (the verilog stimulus didn't complete)    |");

       end

     else

       begin

          $display("|               SIMULATION PASSED               |");

       end

     $display(" ===============================================");

     $finish;

  end

//

// Tasks Definition

//------------------------------

   task tb_error;

      input [65*8:0] error_string;

      begin

         $display("ERROR: %s %t", error_string, $time);

         error = error+1;

      end

   endtask

endmodule