URL https://opencores.org/ocsvn/openmsp430/openmsp430/trunk

Subversion Repositories openmsp430

[/] [openmsp430/] [trunk/] [fpga/] [xilinx_avnet_lx9microbard/] [doc/] [Avt_S6LX9_MicroBoard_UCF_110804.ucf] - Blame information for rev 157

Details | Compare with Previous | View Log


# ----------------------------------------------------------------------------
#     _____
#    /     \
#   /____   \____
#  / \===\   \==/
# /___\===\___\/  AVNET Design Resource Center
#      \======/         www.em.avnet.com/s6microboard
#       \====/
# ----------------------------------------------------------------------------
#
#  Created With Avnet UCF Generator V0.3.0
#     Date: Friday, November 12, 2010
#     Time: 4:11:53 PM
#
#  Updates
#     4 Jan 2011 -- added DIPs; changed IOSTANDARD for LEDs and LPDDR
#        11 Jan 2011 -- Changed IOSTANDARD for DIPs to LVCMOS33.
#                                   Replaced '#' on the end of net names with '_n'
#    14 Jan 2011 -- Added I2C for CDCE913 clock chip
#                   Added formatting and section breaks
#    27 Jan 2011 -- Updated URL for PMODs
#    04 Aug 2011 -- Renaming USER_RESET_N to USER_RESET since it is not low-enabled;
#                   Added extra comment on Ethernet PHY RXD pull-ups
#                   Removed extraneous quote mark in I2C port syntax
#
#  This design is the property of Avnet.  Publication of this
#  design is not authorized without written consent from Avnet.
#
#  Please direct any questions to:
#     Avnet Technical Forums
#     http://community.em.avnet.com/t5/Spartan-6-LX9-MicroBoard/bd-p/Spartan-6LX9MicroBoard
#
#     Avnet Centralized Technical Support
#     Centralized-Support@avnet.com
#     1-800-422-9023
#
#  Disclaimer:
#     Avnet, Inc. makes no warranty for the use of this code or design.
#     This code is provided  "As Is". Avnet, Inc assumes no responsibility for
#     any errors, which may appear in this code, nor does it make a commitment
#     to update the information contained herein. Avnet, Inc specifically
#     disclaims any implied warranties of fitness for a particular purpose.
#                      Copyright(c) 2011 Avnet, Inc.
#                              All rights reserved.
#
# ----------------------------------------------------------------------------
 
############################################################################
# VCC AUX VOLTAGE
############################################################################
CONFIG VCCAUX=3.3;
 
############################################################################
# User Reset Push Button
#   Ignore the timing for this signal
#   Internal pull-down required since external resistor is not populated
############################################################################
NET USER_RESET      LOC = V4  | IOSTANDARD = LVCMOS33 | PULLDOWN;    # "USER_RESET"
NET USER_RESET      TIG;
 
############################################################################
# Micron N25Q128 SPI Flash
#   This is a Multi-I/O Flash.  Several pins have dual purposes
#   depending on the mode.
############################################################################
NET SPI_SCK           LOC = R15 | IOSTANDARD = LVCMOS33;               # "CCLK"
NET SPI_CS_n          LOC = V3  | IOSTANDARD = LVCMOS33;               # "SPI_CS#"
NET SPI_MOSI_MISO0    LOC = T13 | IOSTANDARD = LVCMOS33;               # "MOSI_MISO0"
NET SPI_MISO_MISO1    LOC = R13 | IOSTANDARD = LVCMOS33;               # "D0_DIN_MISO_MISO1"
NET SPI_Wn_MISO2      LOC = T14 | IOSTANDARD = LVCMOS33;               # "D1_MISO2"
NET SPI_HOLDn_MISO3   LOC = V14 | IOSTANDARD = LVCMOS33;               # "D2_MISO3"
 
############################################################################
# Texas Instruments CDCE913 Triple-Output PLL Clock Chip
#   Y1: 40 MHz, USER_CLOCK can be used as external configuration clock
#   Y2: 66.667 MHz
#   Y3: 100 MHz
############################################################################
NET USER_CLOCK        LOC = V10 | IOSTANDARD = LVCMOS33;               # "USER_CLOCK"
NET CLOCK_Y2          LOC = K15 | IOSTANDARD = LVCMOS33;               # "CLOCK_Y2"
NET CLOCK_Y3          LOC = C10 | IOSTANDARD = LVCMOS33;               # "CLOCK_Y3"
 
NET USER_CLOCK TNM_NET = USER_CLOCK;
TIMESPEC TS_USER_CLOCK = PERIOD USER_CLOCK 40000 kHz;
NET CLOCK_Y2 TNM_NET = CLOCK_Y2;
TIMESPEC TS_CLOCK_Y2 = PERIOD CLOCK_Y2 66666.7 kHz;
NET CLOCK_Y3 TNM_NET = CLOCK_Y3;
TIMESPEC TS_CLOCK_Y3 = PERIOD CLOCK_Y3 100000 kHz;
 
############################################################################
# The following oscillator is not populated in production but the footprint
# is compatible with the Maxim DS1088LU
############################################################################
NET BACKUP_CLK        LOC = R8  | IOSTANDARD = LVCMOS33;               # "MAIN_CLK"
 
############################################################################
# User DIP Switch x4
#   Internal pull-down required since external resistor is not populated
############################################################################
NET GPIO_DIP1         LOC = B3  | IOSTANDARD = LVCMOS33 | PULLDOWN;    # "GPIO_DIP1"
NET GPIO_DIP2         LOC = A3  | IOSTANDARD = LVCMOS33 | PULLDOWN;    # "GPIO_DIP2"
NET GPIO_DIP3         LOC = B4  | IOSTANDARD = LVCMOS33 | PULLDOWN;    # "GPIO_DIP3"
NET GPIO_DIP4         LOC = A4  | IOSTANDARD = LVCMOS33 | PULLDOWN;    # "GPIO_DIP4"
 
############################################################################
# User LEDs
############################################################################
NET GPIO_LED1         LOC = P4  | IOSTANDARD = LVCMOS18;               # "GPIO_LED1"
NET GPIO_LED2         LOC = L6  | IOSTANDARD = LVCMOS18;               # "GPIO_LED2"
NET GPIO_LED3         LOC = F5  | IOSTANDARD = LVCMOS18;               # "GPIO_LED3"
NET GPIO_LED4         LOC = C2  | IOSTANDARD = LVCMOS18;               # "GPIO_LED4"
 
############################################################################
# Silicon Labs CP2102 USB-to-UART Bridge Chip
############################################################################
NET USB_RS232_RXD     LOC = R7  | IOSTANDARD = LVCMOS33;               # "USB_RS232_RXD"
NET USB_RS232_TXD     LOC = T7  | IOSTANDARD = LVCMOS33;               # "USB_RS232_TXD"
 
############################################################################
# Texas Instruments CDCE913 programming port
#   Internal pull-ups required since external resistors are not populated
############################################################################
NET SCL               LOC=P12   | IOSTANDARD = LVCMOS33 | PULLUP;    # "SCL"
NET SDA               LOC=U13   | IOSTANDARD = LVCMOS33 | PULLUP;    # "SDA"
 
############################################################################
# Micron MT46H32M16LFBF-5 LPDDR
############################################################################
CONFIG MCB_PERFORMANCE= STANDARD;
# Addresses
NET LPDDR_A0          LOC = J7  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_A0"
NET LPDDR_A1          LOC = J6  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_A1"
NET LPDDR_A2          LOC = H5  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_A2"
NET LPDDR_A3          LOC = L7  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_A3"
NET LPDDR_A4          LOC = F3  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_A4"
NET LPDDR_A5          LOC = H4  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_A5"
NET LPDDR_A6          LOC = H3  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_A6"
NET LPDDR_A7          LOC = H6  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_A7"
NET LPDDR_A8          LOC = D2  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_A8"
NET LPDDR_A9          LOC = D1  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_A9"
NET LPDDR_A10         LOC = F4  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_A10"
NET LPDDR_A11         LOC = D3  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_A11"
NET LPDDR_A12         LOC = G6  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_A12"
NET LPDDR_BA0         LOC = F2  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_BA0"
NET LPDDR_BA1         LOC = F1  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_BA1"
# Data
NET LPDDR_DQ0         LOC = L2  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_DQ0"
NET LPDDR_DQ1         LOC = L1  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_DQ1"
NET LPDDR_DQ2         LOC = K2  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_DQ2"
NET LPDDR_DQ3         LOC = K1  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_DQ3"
NET LPDDR_DQ4         LOC = H2  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_DQ4"
NET LPDDR_DQ5         LOC = H1  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_DQ5"
NET LPDDR_DQ6         LOC = J3  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_DQ6"
NET LPDDR_DQ7         LOC = J1  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_DQ7"
NET LPDDR_DQ8         LOC = M3  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_DQ8"
NET LPDDR_DQ9         LOC = M1  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_DQ9"
NET LPDDR_DQ10        LOC = N2  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_DQ10"
NET LPDDR_DQ11        LOC = N1  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_DQ11"
NET LPDDR_DQ12        LOC = T2  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_DQ12"
NET LPDDR_DQ13        LOC = T1  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_DQ13"
NET LPDDR_DQ14        LOC = U2  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_DQ14"
NET LPDDR_DQ15        LOC = U1  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_DQ15"
NET LPDDR_LDM         LOC = K3  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_LDM"
NET LPDDR_UDM         LOC = K4  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_UDM"
NET LPDDR_LDQS        LOC = L4  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_LDQS"
NET LPDDR_UDQS        LOC = P2  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_UDQS"
# Clock
NET LPDDR_CK_N        LOC = G1  | IOSTANDARD = DIFF_MOBILE_DDR;        # "LPDDR_CK_N"
NET LPDDR_CK_P        LOC = G3  | IOSTANDARD = DIFF_MOBILE_DDR;        # "LPDDR_CK_P"
NET LPDDR_CKE         LOC = H7  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_CKE"
# Control
NET LPDDR_CAS_n       LOC = K5  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_CAS#"
NET LPDDR_RAS_n       LOC = L5  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_RAS#"
NET LPDDR_WE_n        LOC = E3  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_WE#"
NET LPDDR_RZQ         LOC = N4  | IOSTANDARD = MOBILE_DDR;             # "LPDDR_RZQ"
############################################################################
# All the IO resources in an IO tile which contains DQSP/UDQSP are used
# irrespective of a single-ended or differential DQS design. Any signal that
# is connected to the free pin of the same IO tile in a single-ended design
# will be unrouted. Hence, the IOB cannot used as general pupose IO.
############################################################################
CONFIG PROHIBIT = P1,L3;
 
############################################################################
# National Semiconductor DP83848J 10/100 Ethernet PHY
#   Pull-ups on RXD are necessary to set the PHY AD to 11110b.
#   Must keep the PHY from defaulting to PHY AD = 00000b
#   because this is Isolate Mode
############################################################################
NET ETH_COL           LOC = M18 | IOSTANDARD = LVCMOS33 | PULLDOWN;    # "ETH_COL"
NET ETH_CRS           LOC = N17 | IOSTANDARD = LVCMOS33 | PULLDOWN;    # "ETH_CRS"
NET ETH_MDC           LOC = M16 | IOSTANDARD = LVCMOS33;               # "ETH_MDC"
NET ETH_MDIO          LOC = L18 | IOSTANDARD = LVCMOS33;               # "ETH_MDIO"
NET ETH_RESET_n       LOC = T18 | IOSTANDARD = LVCMOS33 | TIG;         # "ETH_RESET#"
NET ETH_RX_CLK        LOC = L15 | IOSTANDARD = LVCMOS33;               # "ETH_RX_CLK"
NET ETH_RX_D0         LOC = T17 | IOSTANDARD = LVCMOS33 | PULLUP;      # "ETH_RX_D0"
NET ETH_RX_D1         LOC = N16 | IOSTANDARD = LVCMOS33 | PULLUP;      # "ETH_RX_D1"
NET ETH_RX_D2         LOC = N15 | IOSTANDARD = LVCMOS33 | PULLUP;      # "ETH_RX_D2"
NET ETH_RX_D3         LOC = P18 | IOSTANDARD = LVCMOS33 | PULLUP;      # "ETH_RX_D3"
NET ETH_RX_DV         LOC = P17 | IOSTANDARD = LVCMOS33;               # "ETH_RX_DV"
NET ETH_RX_ER         LOC = N18 | IOSTANDARD = LVCMOS33;               # "ETH_RX_ER"
NET ETH_TX_CLK        LOC = H17 | IOSTANDARD = LVCMOS33;               # "ETH_TX_CLK"
NET ETH_TX_D0         LOC = K18 | IOSTANDARD = LVCMOS33;               # "ETH_TX_D0"
NET ETH_TX_D1         LOC = K17 | IOSTANDARD = LVCMOS33;               # "ETH_TX_D1"
NET ETH_TX_D2         LOC = J18 | IOSTANDARD = LVCMOS33;               # "ETH_TX_D2"
NET ETH_TX_D3         LOC = J16 | IOSTANDARD = LVCMOS33;               # "ETH_TX_D3"
NET ETH_TX_EN         LOC = L17 | IOSTANDARD = LVCMOS33;               # "ETH_TX_EN"
 
############################################################################
# Peripheral Modules and GPIO
#   Peripheral Modules (PMODs) were invented by Digilent Inc. as small,
#   inexpensive add-on boards for FPGA development boards. With costs
#   starting as low as $10, PMODs allow you to add a number of capabilities
#   to your board, including A/D, D/A, Wireless Radio, SD Card, 2x16
#   Character LCD and a variety of LEDs, switches, and headers. See the
#   complete library of Digilent PMODs at
#     https://www.digilentinc.com/PMODs
############################################################################
# Connector J5
NET PMOD1_P1          LOC = F15 | IOSTANDARD = LVCMOS33;               # "PMOD1_P1"
NET PMOD1_P2          LOC = F16 | IOSTANDARD = LVCMOS33;               # "PMOD1_P2"
NET PMOD1_P3          LOC = C17 | IOSTANDARD = LVCMOS33;               # "PMOD1_P3"
NET PMOD1_P4          LOC = C18 | IOSTANDARD = LVCMOS33;               # "PMOD1_P4"
NET PMOD1_P7          LOC = F14 | IOSTANDARD = LVCMOS33;               # "PMOD1_P7"
NET PMOD1_P8          LOC = G14 | IOSTANDARD = LVCMOS33;               # "PMOD1_P8"
NET PMOD1_P9          LOC = D17 | IOSTANDARD = LVCMOS33;               # "PMOD1_P9"
NET PMOD1_P10         LOC = D18 | IOSTANDARD = LVCMOS33;               # "PMOD1_P10"
 
# Connector J4
NET PMOD2_P1          LOC = H12 | IOSTANDARD = LVCMOS33;               # "PMOD2_P1"
NET PMOD2_P2          LOC = G13 | IOSTANDARD = LVCMOS33;               # "PMOD2_P2"
NET PMOD2_P3          LOC = E16 | IOSTANDARD = LVCMOS33;               # "PMOD2_P3"
NET PMOD2_P4          LOC = E18 | IOSTANDARD = LVCMOS33;               # "PMOD2_P4"
NET PMOD2_P7          LOC = K12 | IOSTANDARD = LVCMOS33;               # "PMOD2_P7"
NET PMOD2_P8          LOC = K13 | IOSTANDARD = LVCMOS33;               # "PMOD2_P8"
NET PMOD2_P9          LOC = F17 | IOSTANDARD = LVCMOS33;               # "PMOD2_P9"
NET PMOD2_P10         LOC = F18 | IOSTANDARD = LVCMOS33;               # "PMOD2_P10"

Browse

Tools

Subversion Repositories openmsp430

[/] [openmsp430/] [trunk/] [fpga/] [xilinx_avnet_lx9microbard/] [doc/] [Avt_S6LX9_MicroBoard_UCF_110804.ucf] - Blame information for rev 157

Line No.	Rev	Author	Line
1	157	olivier.gi	`# ----------------------------------------------------------------------------`
2			`# _____`
3			`# / \`
4			`# /____ \____`
5			`# / \===\ \==/`
6			`# /___\===\___\/ AVNET Design Resource Center`
7			`# \======/ www.em.avnet.com/s6microboard`
8			`# \====/`
9			`# ----------------------------------------------------------------------------`
10			`#`
11			`# Created With Avnet UCF Generator V0.3.0`
12			`# Date: Friday, November 12, 2010`
13			`# Time: 4:11:53 PM`
14			`#`
15			`# Updates`
16			`# 4 Jan 2011 -- added DIPs; changed IOSTANDARD for LEDs and LPDDR`
17			`# 11 Jan 2011 -- Changed IOSTANDARD for DIPs to LVCMOS33.`
18			`# Replaced '#' on the end of net names with '_n'`
19			`# 14 Jan 2011 -- Added I2C for CDCE913 clock chip`
20			`# Added formatting and section breaks`
21			`# 27 Jan 2011 -- Updated URL for PMODs`
22			`# 04 Aug 2011 -- Renaming USER_RESET_N to USER_RESET since it is not low-enabled;`
23			`# Added extra comment on Ethernet PHY RXD pull-ups`
24			`# Removed extraneous quote mark in I2C port syntax`
25			`#`
26			`# This design is the property of Avnet. Publication of this`
27			`# design is not authorized without written consent from Avnet.`
28			`#`
29			`# Please direct any questions to:`
30			`# Avnet Technical Forums`
31			`# http://community.em.avnet.com/t5/Spartan-6-LX9-MicroBoard/bd-p/Spartan-6LX9MicroBoard`
32			`#`
33			`# Avnet Centralized Technical Support`
34			`# Centralized-Support@avnet.com`
35			`# 1-800-422-9023`
36			`#`
37			`# Disclaimer:`
38			`# Avnet, Inc. makes no warranty for the use of this code or design.`
39			`# This code is provided "As Is". Avnet, Inc assumes no responsibility for`
40			`# any errors, which may appear in this code, nor does it make a commitment`
41			`# to update the information contained herein. Avnet, Inc specifically`
42			`# disclaims any implied warranties of fitness for a particular purpose.`
43			`# Copyright(c) 2011 Avnet, Inc.`
44			`# All rights reserved.`
45			`#`
46			`# ----------------------------------------------------------------------------`
47
48			`############################################################################`
49			`# VCC AUX VOLTAGE`
50			`############################################################################`
51			`CONFIG VCCAUX=3.3;`
52
53			`############################################################################`
54			`# User Reset Push Button`
55			`# Ignore the timing for this signal`
56			`# Internal pull-down required since external resistor is not populated`
57			`############################################################################`
58			`NET USER_RESET LOC = V4 \| IOSTANDARD = LVCMOS33 \| PULLDOWN; # "USER_RESET"`
59			`NET USER_RESET TIG;`
60
61			`############################################################################`
62			`# Micron N25Q128 SPI Flash`
63			`# This is a Multi-I/O Flash. Several pins have dual purposes`
64			`# depending on the mode.`
65			`############################################################################`
66			`NET SPI_SCK LOC = R15 \| IOSTANDARD = LVCMOS33; # "CCLK"`
67			`NET SPI_CS_n LOC = V3 \| IOSTANDARD = LVCMOS33; # "SPI_CS#"`
68			`NET SPI_MOSI_MISO0 LOC = T13 \| IOSTANDARD = LVCMOS33; # "MOSI_MISO0"`
69			`NET SPI_MISO_MISO1 LOC = R13 \| IOSTANDARD = LVCMOS33; # "D0_DIN_MISO_MISO1"`
70			`NET SPI_Wn_MISO2 LOC = T14 \| IOSTANDARD = LVCMOS33; # "D1_MISO2"`
71			`NET SPI_HOLDn_MISO3 LOC = V14 \| IOSTANDARD = LVCMOS33; # "D2_MISO3"`
72
73			`############################################################################`
74			`# Texas Instruments CDCE913 Triple-Output PLL Clock Chip`
75			`# Y1: 40 MHz, USER_CLOCK can be used as external configuration clock`
76			`# Y2: 66.667 MHz`
77			`# Y3: 100 MHz`
78			`############################################################################`
79			`NET USER_CLOCK LOC = V10 \| IOSTANDARD = LVCMOS33; # "USER_CLOCK"`
80			`NET CLOCK_Y2 LOC = K15 \| IOSTANDARD = LVCMOS33; # "CLOCK_Y2"`
81			`NET CLOCK_Y3 LOC = C10 \| IOSTANDARD = LVCMOS33; # "CLOCK_Y3"`
82
83			`NET USER_CLOCK TNM_NET = USER_CLOCK;`
84			`TIMESPEC TS_USER_CLOCK = PERIOD USER_CLOCK 40000 kHz;`
85			`NET CLOCK_Y2 TNM_NET = CLOCK_Y2;`
86			`TIMESPEC TS_CLOCK_Y2 = PERIOD CLOCK_Y2 66666.7 kHz;`
87			`NET CLOCK_Y3 TNM_NET = CLOCK_Y3;`
88			`TIMESPEC TS_CLOCK_Y3 = PERIOD CLOCK_Y3 100000 kHz;`
89
90			`############################################################################`
91			`# The following oscillator is not populated in production but the footprint`
92			`# is compatible with the Maxim DS1088LU`
93			`############################################################################`
94			`NET BACKUP_CLK LOC = R8 \| IOSTANDARD = LVCMOS33; # "MAIN_CLK"`
95
96			`############################################################################`
97			`# User DIP Switch x4`
98			`# Internal pull-down required since external resistor is not populated`
99			`############################################################################`
100			`NET GPIO_DIP1 LOC = B3 \| IOSTANDARD = LVCMOS33 \| PULLDOWN; # "GPIO_DIP1"`
101			`NET GPIO_DIP2 LOC = A3 \| IOSTANDARD = LVCMOS33 \| PULLDOWN; # "GPIO_DIP2"`
102			`NET GPIO_DIP3 LOC = B4 \| IOSTANDARD = LVCMOS33 \| PULLDOWN; # "GPIO_DIP3"`
103			`NET GPIO_DIP4 LOC = A4 \| IOSTANDARD = LVCMOS33 \| PULLDOWN; # "GPIO_DIP4"`
104
105			`############################################################################`
106			`# User LEDs`
107			`############################################################################`
108			`NET GPIO_LED1 LOC = P4 \| IOSTANDARD = LVCMOS18; # "GPIO_LED1"`
109			`NET GPIO_LED2 LOC = L6 \| IOSTANDARD = LVCMOS18; # "GPIO_LED2"`
110			`NET GPIO_LED3 LOC = F5 \| IOSTANDARD = LVCMOS18; # "GPIO_LED3"`
111			`NET GPIO_LED4 LOC = C2 \| IOSTANDARD = LVCMOS18; # "GPIO_LED4"`
112
113			`############################################################################`
114			`# Silicon Labs CP2102 USB-to-UART Bridge Chip`
115			`############################################################################`
116			`NET USB_RS232_RXD LOC = R7 \| IOSTANDARD = LVCMOS33; # "USB_RS232_RXD"`
117			`NET USB_RS232_TXD LOC = T7 \| IOSTANDARD = LVCMOS33; # "USB_RS232_TXD"`
118
119			`############################################################################`
120			`# Texas Instruments CDCE913 programming port`
121			`# Internal pull-ups required since external resistors are not populated`
122			`############################################################################`
123			`NET SCL LOC=P12 \| IOSTANDARD = LVCMOS33 \| PULLUP; # "SCL"`
124			`NET SDA LOC=U13 \| IOSTANDARD = LVCMOS33 \| PULLUP; # "SDA"`
125
126			`############################################################################`
127			`# Micron MT46H32M16LFBF-5 LPDDR`
128			`############################################################################`
129			`CONFIG MCB_PERFORMANCE= STANDARD;`
130			`# Addresses`
131			`NET LPDDR_A0 LOC = J7 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_A0"`
132			`NET LPDDR_A1 LOC = J6 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_A1"`
133			`NET LPDDR_A2 LOC = H5 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_A2"`
134			`NET LPDDR_A3 LOC = L7 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_A3"`
135			`NET LPDDR_A4 LOC = F3 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_A4"`
136			`NET LPDDR_A5 LOC = H4 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_A5"`
137			`NET LPDDR_A6 LOC = H3 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_A6"`
138			`NET LPDDR_A7 LOC = H6 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_A7"`
139			`NET LPDDR_A8 LOC = D2 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_A8"`
140			`NET LPDDR_A9 LOC = D1 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_A9"`
141			`NET LPDDR_A10 LOC = F4 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_A10"`
142			`NET LPDDR_A11 LOC = D3 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_A11"`
143			`NET LPDDR_A12 LOC = G6 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_A12"`
144			`NET LPDDR_BA0 LOC = F2 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_BA0"`
145			`NET LPDDR_BA1 LOC = F1 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_BA1"`
146			`# Data`
147			`NET LPDDR_DQ0 LOC = L2 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_DQ0"`
148			`NET LPDDR_DQ1 LOC = L1 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_DQ1"`
149			`NET LPDDR_DQ2 LOC = K2 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_DQ2"`
150			`NET LPDDR_DQ3 LOC = K1 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_DQ3"`
151			`NET LPDDR_DQ4 LOC = H2 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_DQ4"`
152			`NET LPDDR_DQ5 LOC = H1 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_DQ5"`
153			`NET LPDDR_DQ6 LOC = J3 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_DQ6"`
154			`NET LPDDR_DQ7 LOC = J1 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_DQ7"`
155			`NET LPDDR_DQ8 LOC = M3 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_DQ8"`
156			`NET LPDDR_DQ9 LOC = M1 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_DQ9"`
157			`NET LPDDR_DQ10 LOC = N2 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_DQ10"`
158			`NET LPDDR_DQ11 LOC = N1 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_DQ11"`
159			`NET LPDDR_DQ12 LOC = T2 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_DQ12"`
160			`NET LPDDR_DQ13 LOC = T1 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_DQ13"`
161			`NET LPDDR_DQ14 LOC = U2 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_DQ14"`
162			`NET LPDDR_DQ15 LOC = U1 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_DQ15"`
163			`NET LPDDR_LDM LOC = K3 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_LDM"`
164			`NET LPDDR_UDM LOC = K4 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_UDM"`
165			`NET LPDDR_LDQS LOC = L4 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_LDQS"`
166			`NET LPDDR_UDQS LOC = P2 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_UDQS"`
167			`# Clock`
168			`NET LPDDR_CK_N LOC = G1 \| IOSTANDARD = DIFF_MOBILE_DDR; # "LPDDR_CK_N"`
169			`NET LPDDR_CK_P LOC = G3 \| IOSTANDARD = DIFF_MOBILE_DDR; # "LPDDR_CK_P"`
170			`NET LPDDR_CKE LOC = H7 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_CKE"`
171			`# Control`
172			`NET LPDDR_CAS_n LOC = K5 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_CAS#"`
173			`NET LPDDR_RAS_n LOC = L5 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_RAS#"`
174			`NET LPDDR_WE_n LOC = E3 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_WE#"`
175			`NET LPDDR_RZQ LOC = N4 \| IOSTANDARD = MOBILE_DDR; # "LPDDR_RZQ"`
176			`############################################################################`
177			`# All the IO resources in an IO tile which contains DQSP/UDQSP are used`
178			`# irrespective of a single-ended or differential DQS design. Any signal that`
179			`# is connected to the free pin of the same IO tile in a single-ended design`
180			`# will be unrouted. Hence, the IOB cannot used as general pupose IO.`
181			`############################################################################`
182			`CONFIG PROHIBIT = P1,L3;`
183
184			`############################################################################`
185			`# National Semiconductor DP83848J 10/100 Ethernet PHY`
186			`# Pull-ups on RXD are necessary to set the PHY AD to 11110b.`
187			`# Must keep the PHY from defaulting to PHY AD = 00000b`
188			`# because this is Isolate Mode`
189			`############################################################################`
190			`NET ETH_COL LOC = M18 \| IOSTANDARD = LVCMOS33 \| PULLDOWN; # "ETH_COL"`
191			`NET ETH_CRS LOC = N17 \| IOSTANDARD = LVCMOS33 \| PULLDOWN; # "ETH_CRS"`
192			`NET ETH_MDC LOC = M16 \| IOSTANDARD = LVCMOS33; # "ETH_MDC"`
193			`NET ETH_MDIO LOC = L18 \| IOSTANDARD = LVCMOS33; # "ETH_MDIO"`
194			`NET ETH_RESET_n LOC = T18 \| IOSTANDARD = LVCMOS33 \| TIG; # "ETH_RESET#"`
195			`NET ETH_RX_CLK LOC = L15 \| IOSTANDARD = LVCMOS33; # "ETH_RX_CLK"`
196			`NET ETH_RX_D0 LOC = T17 \| IOSTANDARD = LVCMOS33 \| PULLUP; # "ETH_RX_D0"`
197			`NET ETH_RX_D1 LOC = N16 \| IOSTANDARD = LVCMOS33 \| PULLUP; # "ETH_RX_D1"`
198			`NET ETH_RX_D2 LOC = N15 \| IOSTANDARD = LVCMOS33 \| PULLUP; # "ETH_RX_D2"`
199			`NET ETH_RX_D3 LOC = P18 \| IOSTANDARD = LVCMOS33 \| PULLUP; # "ETH_RX_D3"`
200			`NET ETH_RX_DV LOC = P17 \| IOSTANDARD = LVCMOS33; # "ETH_RX_DV"`
201			`NET ETH_RX_ER LOC = N18 \| IOSTANDARD = LVCMOS33; # "ETH_RX_ER"`
202			`NET ETH_TX_CLK LOC = H17 \| IOSTANDARD = LVCMOS33; # "ETH_TX_CLK"`
203			`NET ETH_TX_D0 LOC = K18 \| IOSTANDARD = LVCMOS33; # "ETH_TX_D0"`
204			`NET ETH_TX_D1 LOC = K17 \| IOSTANDARD = LVCMOS33; # "ETH_TX_D1"`
205			`NET ETH_TX_D2 LOC = J18 \| IOSTANDARD = LVCMOS33; # "ETH_TX_D2"`
206			`NET ETH_TX_D3 LOC = J16 \| IOSTANDARD = LVCMOS33; # "ETH_TX_D3"`
207			`NET ETH_TX_EN LOC = L17 \| IOSTANDARD = LVCMOS33; # "ETH_TX_EN"`
208
209			`############################################################################`
210			`# Peripheral Modules and GPIO`
211			`# Peripheral Modules (PMODs) were invented by Digilent Inc. as small,`
212			`# inexpensive add-on boards for FPGA development boards. With costs`
213			`# starting as low as $10, PMODs allow you to add a number of capabilities`
214			`# to your board, including A/D, D/A, Wireless Radio, SD Card, 2x16`
215			`# Character LCD and a variety of LEDs, switches, and headers. See the`
216			`# complete library of Digilent PMODs at`
217			`# https://www.digilentinc.com/PMODs`
218			`############################################################################`
219			`# Connector J5`
220			`NET PMOD1_P1 LOC = F15 \| IOSTANDARD = LVCMOS33; # "PMOD1_P1"`
221			`NET PMOD1_P2 LOC = F16 \| IOSTANDARD = LVCMOS33; # "PMOD1_P2"`
222			`NET PMOD1_P3 LOC = C17 \| IOSTANDARD = LVCMOS33; # "PMOD1_P3"`
223			`NET PMOD1_P4 LOC = C18 \| IOSTANDARD = LVCMOS33; # "PMOD1_P4"`
224			`NET PMOD1_P7 LOC = F14 \| IOSTANDARD = LVCMOS33; # "PMOD1_P7"`
225			`NET PMOD1_P8 LOC = G14 \| IOSTANDARD = LVCMOS33; # "PMOD1_P8"`
226			`NET PMOD1_P9 LOC = D17 \| IOSTANDARD = LVCMOS33; # "PMOD1_P9"`
227			`NET PMOD1_P10 LOC = D18 \| IOSTANDARD = LVCMOS33; # "PMOD1_P10"`
228
229			`# Connector J4`
230			`NET PMOD2_P1 LOC = H12 \| IOSTANDARD = LVCMOS33; # "PMOD2_P1"`
231			`NET PMOD2_P2 LOC = G13 \| IOSTANDARD = LVCMOS33; # "PMOD2_P2"`
232			`NET PMOD2_P3 LOC = E16 \| IOSTANDARD = LVCMOS33; # "PMOD2_P3"`
233			`NET PMOD2_P4 LOC = E18 \| IOSTANDARD = LVCMOS33; # "PMOD2_P4"`
234			`NET PMOD2_P7 LOC = K12 \| IOSTANDARD = LVCMOS33; # "PMOD2_P7"`
235			`NET PMOD2_P8 LOC = K13 \| IOSTANDARD = LVCMOS33; # "PMOD2_P8"`
236			`NET PMOD2_P9 LOC = F17 \| IOSTANDARD = LVCMOS33; # "PMOD2_P9"`
237			`NET PMOD2_P10 LOC = F18 \| IOSTANDARD = LVCMOS33; # "PMOD2_P10"`