Subversion Repositories openmsp430

/*******************************************************************************

*     This file is owned and controlled by Xilinx and must be used solely      *

*     for design, simulation, implementation and creation of design files      *

*     limited to Xilinx devices or technologies. Use with non-Xilinx           *

*     devices or technologies is expressly prohibited and immediately          *

*     terminates your license.                                                 *

*                                                                              *

*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" SOLELY     *

*     FOR USE IN DEVELOPING PROGRAMS AND SOLUTIONS FOR XILINX DEVICES.  BY     *

*     PROVIDING THIS DESIGN, CODE, OR INFORMATION AS ONE POSSIBLE              *

*     IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, XILINX IS       *

*     MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE FROM ANY       *

*     CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING ANY        *

*     RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY        *

*     DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE    *

*     IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR           *

*     REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF          *

*     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A    *

*     PARTICULAR PURPOSE.                                                      *

*                                                                              *

*     Xilinx products are not intended for use in life support appliances,     *

*     devices, or systems.  Use in such applications are expressly             *

*     prohibited.                                                              *

*                                                                              *

*     (c) Copyright 1995-2012 Xilinx, Inc.                                     *

*     All rights reserved.                                                     *

*******************************************************************************/

/*******************************************************************************

*     Generated from core with identifier: xilinx.com:ip:blk_mem_gen:7.2       *

*                                                                              *

*     The Xilinx LogiCORE IP Block Memory Generator replaces the Dual Port     *

*     Block Memory and Single Port Block Memory LogiCOREs, but is not a        *

*     direct drop-in replacement.  It should be used in all new Xilinx         *

*     designs. The core supports RAM and ROM functions over a wide range of    *

*     widths and depths. Use this core to generate block memories with         *

*     symmetric or asymmetric read and write port widths, as well as cores     *

*     which can perform simultaneous write operations to separate              *

*     locations, and simultaneous read operations from the same location.      *

*     For more information on differences in interface and feature support     *

*     between this core and the Dual Port Block Memory and Single Port         *

*     Block Memory LogiCOREs, please consult the data sheet.                   *

*******************************************************************************/

// Interfaces:

//    CLK.ACLK

//        AXI4 Interconnect Clock Input

//    RST.ARESETN

//        AXI4 Interconnect Reset Input

//    AXI_SLAVE_S_AXI

//        AXI_SLAVE

//    AXILite_SLAVE_S_AXI

//        AXILite_SLAVE

//    BRAM_PORTA

//        BRAM_PORTA

//    BRAM_PORTB

//        BRAM_PORTB

// The following must be inserted into your Verilog file for this

// core to be instantiated. Change the instance name and port connections

// (in parentheses) to your own signal names.

//----------- Begin Cut here for INSTANTIATION Template ---// INST_TAG

ram_16x8k_dp your_instance_name (

  .clka(clka), // input clka

  .ena(ena), // input ena

  .wea(wea), // input [1 : 0] wea

  .addra(addra), // input [12 : 0] addra

  .dina(dina), // input [15 : 0] dina

  .douta(douta), // output [15 : 0] douta

  .clkb(clkb), // input clkb

  .enb(enb), // input enb

  .web(web), // input [1 : 0] web

  .addrb(addrb), // input [12 : 0] addrb

  .dinb(dinb), // input [15 : 0] dinb

  .doutb(doutb) // output [15 : 0] doutb

);

// INST_TAG_END ------ End INSTANTIATION Template ---------

// You must compile the wrapper file ram_16x8k_dp.v when simulating

// the core, ram_16x8k_dp. When compiling the wrapper file, be sure to

// reference the XilinxCoreLib Verilog simulation library. For detailed

// instructions, please refer to the "CORE Generator Help".