URL https://opencores.org/ocsvn/openmsp430/openmsp430/trunk

Subversion Repositories openmsp430

[/] [openmsp430/] [trunk/] [fpga/] [xilinx_diligent_s3board/] [README] - Blame information for rev 171

Go to most recent revision | Details | Compare with Previous | View Log


 ==========================================================================
|                           RS232 CONNECTOR                                |
 ==========================================================================
 
In order to play around with the RS232 connector, it has been muxed
between:
            - GPIO port P1.1 (TX) / P2.2 (RX)  -->  for TA_UART software project
            - the debug interface.             -->  for LEDS    software project
            - the simple hardware UART         -->  for HW_UART software project
 
The mux is controlled with the SW0/SW1 switches on the board:
 
            00 = debug interface
            01 = GPIO
            10 = simple hardware uart
            11 = debug interface
 

Line No.	Rev	Author	Line
1	136	olivier.gi	`==========================================================================`
2			`\| RS232 CONNECTOR \|`
3			`==========================================================================`
4
5			`In order to play around with the RS232 connector, it has been muxed`
6			`between:`
7			`- GPIO port P1.1 (TX) / P2.2 (RX) --> for TA_UART software project`
8			`- the debug interface. --> for LEDS software project`
9			`- the simple hardware UART --> for HW_UART software project`
10
11			`The mux is controlled with the SW0/SW1 switches on the board:`
12
13			`00 = debug interface`
14			`01 = GPIO`
15			`10 = simple hardware uart`
16			`11 = debug interface`
17

Browse

Tools

Subversion Repositories openmsp430

[/] [openmsp430/] [trunk/] [fpga/] [xilinx_diligent_s3board/] [README] - Blame information for rev 171