Subversion Repositories openrisc

# Copyright 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010

# Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify

# it under the terms of the GNU General Public License as published by

# the Free Software Foundation; either version 3 of the License, or

# (at your option) any later version.

#

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

# GNU General Public License for more details.

#

# You should have received a copy of the GNU General Public License

# along with this program.  If not, see .

# This file was written by Elena Zannoni (ezannoni@cygnus.com)

if $tracelevel then {

    strace $tracelevel

}

# are we on a target board? If so, don't run these tests.

# note: this is necessary because we cannot use runto_main (which would

# work for remote targets too) because of the different prompt we get

# when using annotation level 2.

#

if [is_remote target] then {

    return 0

}

#

# test running programs

#

set testfile "annota3"

set srcfile ${testfile}.c

set binfile ${objdir}/${subdir}/${testfile}$EXEEXT

if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug nowarnings}] != "" } {

    untested annota3.exp

    return -1

}

gdb_exit

gdb_start

gdb_reinitialize_dir $srcdir/$subdir

gdb_load ${binfile}

if [target_info exists gdb_stub] {

    gdb_step_for_stub;

}

#

# the line at which break main will put the breakpoint

#

set main_line 32

# The commands we test here produce many lines of output; disable "press

#  to continue" prompts.

gdb_test_no_output "set height 0"

#

# break at main

#

gdb_test "break main" \

    "Breakpoint.*at.* file .*$srcfile, line.*" \

    "breakpoint main"

# NOTE: this prompt is OK only when the annotation level is > 1

# NOTE: When this prompt is in use the gdb_test procedure cannot be

# used because it assumes that the last char after the gdb_prompt is a

# white space. This is not true with this annotated prompt. So we must

# use send_gdb and gdb_expect or gdb_expect_list.

set old_gdb_prompt $gdb_prompt

set gdb_prompt "\r\n\032\032pre-prompt\r\n$gdb_prompt \r\n\032\032prompt\r\n"

#

# set the annotation level to 3

#

# of course, this will test:

# annotate-pre-prompt

# annotate-prompt

# annotate-post-prompt (in the next block)

#

send_gdb "set annotate 3\n"

gdb_expect_list "annotation set at level 3" "\r\n$gdb_prompt$" {

    "set annotate 3"

}

#

# if construct:

#

gdb_test_multiple "if 1" "start if construct" {

    -re "^if 1\r\n\r\n\032\032post-prompt\r\n\r\n\032\032pre-commands\r\n >\r\n\032\032commands\r\n$" {

        pass "start if construct"

    }

}

gdb_test_multiple "end" "end if construct" {

    -re "^end\r\n\r\n\032\032post-commands\r\n$gdb_prompt$" {

        pass "end if construct"

    }

}

#

# info break:

#

send_gdb "info break\n"

gdb_expect_list "breakpoint info" "$gdb_prompt$" {

    "\r\n\032\032post-prompt\r\n"

    "Num     Type           Disp Enb Address    +What\r\n"

    "1       breakpoint     keep y   0x\[0-9a-zA-Z\]+ +in main at .*annota3.c:32\r\n"

}

#

# run to a break point will test:

#

#exp_internal 1

send_gdb "run\n"

gdb_expect_list "run until main breakpoint" "$gdb_prompt$" {

    "\r\n\032\032post-prompt\r\n"

    "Starting program: .*annota3(|\.exe) \r\n"

    "\r\n\032\032starting\r\n"

    "\r\n\032\032breakpoint 1\r\n"

    "\r\n"

    "Breakpoint 1, "

    "\r\n\032\032frame-begin 0 0x\[0-9a-z\]+\r\n"

    "main \\(\\) at .*annota3.c:32\r\n"

    "\r\n\032\032source.*annota3.c:32:.*:beg:0x\[0-9a-z\]+\r\n"

    "\r\n\032\032stopped\r\n"

}

#exp_internal 0

#exit 0

#

# Let's do a next, to get to a point where the array is initialized

# We don't care about the annotated output for this operation, it is the same as

# the one produced by run above

#

send_gdb "next\n"

gdb_expect_list "go after array init line" "$gdb_prompt$" {

    "\r\n\032\032post-prompt\r\n"

    "\r\n\032\032starting\r\n"

    "\r\n\032\032source .*annota3.c:\[0-9\]+:\[0-9\]+:beg:0x\[0-9a-z\]+\r\n"

    "\r\n\032\032stopped\r\n"

}

#

# printing the array:

#

send_gdb "print my_array\n"

gdb_expect_list "print array" "$gdb_prompt$" {

    "\r\n\032\032post-prompt\r\n"

    ".*= .1, 2, 3.\r\n"

}

#

# this should generate an error message, so to test:

# annotate-error-begin

# FIXME: annotate-error not tested

#

#exp_internal 1

send_gdb "print non_existent_value\n"

gdb_expect_list "print non_existent_value" "$gdb_prompt$" {

    "\r\n\032\032post-prompt\r\n"

    "\r\n\032\032error-begin\r\n"

    "No symbol \"non_existent_value\" in current context.\r\n"

    "\r\n\032\032error\r\n"

}

#

# break at signal handler

#

send_gdb "break handle_USR1\n"

gdb_expect_list "breakpoint handle_USR1" "$gdb_prompt$" {

    "\r\n\032\032post-prompt\r\n"

    "Breakpoint.*at 0x\[0-9a-z\]+: file.*annota3.c, line.*\r\n"

}

#

# break at printf. When we are stopped at printf, we can test

#

send_gdb "break printf\n"

gdb_expect_list "breakpoint printf" "$gdb_prompt$" {

    "\r\n\032\032post-prompt\r\n"

    "Breakpoint.*at 0x\[0-9a-z\]+.*"

}

#

# get to printf

#

send_gdb "continue\n"

gdb_expect_list "continue to printf" "$gdb_prompt$" {

    "\r\n\032\032post-prompt\r\n"

    "Continuing.\r\n"

    "\r\n\032\032starting\r\n"

    "\r\n\032\032breakpoint 3\r\n"

    "\r\n"

    "Breakpoint 3, \[^\r\n\]*\r\n"

    "\r\n\032\032stopped\r\n"

}

send_gdb "backtrace\n"

gdb_expect_list "backtrace from shlibrary" "$gdb_prompt$" {

    "\r\n\032\032post-prompt\r\n"

    "#0 .* .*printf(@\[^ ]*)? \[^\r\n\]*\r\n"

    "#1 .* main \[^\r\n\]*\r\n"

}

#

# test printing a frame with some arguments:

#

if [target_info exists gdb,nosignals] {

    unsupported "send SIGUSR1"

    unsupported "backtrace @ signal handler"

} else {

    send_gdb "signal SIGUSR1\n"

    gdb_expect_list "send SIGUSR1" "$gdb_prompt$" {

        "\r\n\032\032post-prompt\r\n"

        "Continuing with signal SIGUSR1.\r\n"

        "\r\n\032\032starting\r\n"

        "\r\n\032\032breakpoint 2\r\n"

        "\r\n"

        "Breakpoint 2, "

        "\r\n\032\032frame-begin 0 0x\[0-9a-z\]+\r\n"

        "handle_USR1 \\(sig=\[0-9\]+\\) at .*annota3.c:\[0-9\]+\r\n"

        "\r\n\032\032source .*annota3.c:\[0-9\]+:\[0-9\]+:beg:0x\[0-9a-z\]+\r\n"

        "\r\n\032\032stopped\r\n"

    }

    #

    # test:

    #

    send_gdb "backtrace\n"

    gdb_expect_list "backtrace @ signal handler" "$gdb_prompt$" {

        "#0 +handle_USR1 \[^\r\n\]+\r\n"

        "#1 +.signal handler called.\r\n"

        "#2 .* .*printf(@\[^ \]*)? \[^\r\n\]+\r\n"

        "#3 .* main \[^\r\n\]+\r\n"

    }

}

#

# delete all the breakpoints

#

send_gdb "delete 1\n"

gdb_expect_list "delete bp 1" "$gdb_prompt$" {

    "\r\n\032\032post-prompt\r\n"

}

send_gdb "delete 2\n"

gdb_expect_list "delete bp 2" "$gdb_prompt$" {

    "\r\n\032\032post-prompt\r\n"

}

send_gdb "delete 3\n"

gdb_expect_list "delete bp 3" "$gdb_prompt$" {

    "\r\n\032\032post-prompt\r\n"

}

#

# break at main, after value is initialized. This is in preparation

# to test the annotate output for the display command.

#

send_gdb "break main\n"

gdb_expect_list "break at 28" "$gdb_prompt$" {

    "\r\n\032\032post-prompt\r\n"

    "Breakpoint 4 at 0x\[0-9a-z\]+: file .*annota3.c, line 32.\r\n"

}

#

# display the value

#

send_gdb "display value\n"

gdb_expect_list "set up display" "$gdb_prompt$" {

    "\r\n\032\032post-prompt\r\n"

    "1: value = 7\r\n"

}

# should ask query. Test annotate-query.

# we don't care about anything else here, only the query.

send_gdb "run\n"

gdb_expect {

  -re "pre-query.*already.*\\(y or n\\).*query\r\n" {

         send_gdb "y\n"

         gdb_expect {

             -re ".*post-query.*$gdb_prompt$" \

                     { pass "re-run" }

             -re ".*$gdb_prompt$"  { fail "re-run" }

             timeout { fail "re-run (timeout)" }

         }

     }

  -re ".*$gdb_prompt$"  { fail "re-run" }

  timeout { fail "re-run (timeout)" }

}

#

# Test that breakpoints-invalid is issued once and only once for

# breakpoint ignore count changes, after annotation stopped.

# NOTE: breakpoints-invalid annotations have been removed from

# level 3 but keep these tests for continuity and comparison

# with annota1.exp.

send_gdb "break 46\n"

gdb_expect_list  "break at 46" "$gdb_prompt$" {

    "\r\n\032\032post-prompt\r\n"

    "Breakpoint 5 at 0x\[0-9a-z\]+: file .*annota3.c, line 46.\r\n"

}

send_gdb "ignore 5 4\n"

gdb_expect_list "ignore 5 4" "$gdb_prompt$" {

    "\r\n\032\032post-prompt\r\n"

    "Will ignore next 4 crossings of breakpoint 5"

    "\r\n"

}

send_gdb "continue\n"

gdb_expect_list "annotate ignore count change" "$gdb_prompt$" {

    "\r\n\032\032post-prompt\r\n"

    "\r\n\032\032breakpoint 5\r\n"

    "\r\n"

    "Breakpoint 5, "

    "\r\n\032\032frame-begin 0 0x\[0-9a-z\]+\r\n"

    "main \\(\\) at .*annota3.c:46\r\n"

    "\r\n\032\032source .*annota3.c:46:\[0-9\]+:beg:0x\[0-9a-z\]+\r\n"

    "1: value = 11\r\n"

    "\r\n\032\032stopped\r\n"

}

# check that ignore command is working, or the above can provide

# misleading assurance ...

send_gdb "next\n"

gdb_expect_list "next to exit loop" "$gdb_prompt$"  {

    "\r\n\032\032post-prompt\r\n"

    "\r\n\032\032starting\r\n"

    "\r\n\032\032source.*annota3.c:\[0-9\]+:\[0-9\]+:beg:0x\[0-9a-z\]+\r\n"

    "1: value = 12\r\n"

    "\r\n\032\032stopped\r\n"

}

send_gdb "next\n"

gdb_expect_list "breakpoint ignore count" "$gdb_prompt$" {

    "\r\n\032\032post-prompt\r\n"

    "\r\n\032\032starting\r\n"

    "\r\n\032\032source.*annota3.c:49:\[0-9\]+:beg:0x\[0-9a-z\]+\r\n"

    "1: value = 12\r\n"

    "\r\n\032\032stopped\r\n"

}

#

# Send a signal that is not handled

#

# SIGTRAP signals are dropped before they get to the inferior process

# on hpux11.  In theory, this behaivor can be controlled by setting

# TTEO_NORM_SIGTRAP in the inferior, but doing so did not cause

# the signal to be properly delivered.

#

# It has been verified that other signals will be delivered.  However,

# rather than twiddle the test, I choose to leave it as-is as it

# exposes an interesting failure on hpux11.

if [target_info exists gdb,nosignals] {

    unsupported "signal sent"

} else {

    setup_xfail hppa*-*-hpux11*

    send_gdb "signal SIGTRAP\n"

    gdb_expect_list "signal sent" "$gdb_prompt$" {

        "\r\n\032\032post-prompt\r\n"

        "Continuing with signal SIGTRAP.\r\n"

        "\r\n\032\032starting\r\n"

        "\r\n\032\032signalled\r\n"

        "\r\nProgram terminated with signal SIGTRAP, Trace.breakpoint trap.\r\n"

        "The program no longer exists.\r\n"

        "\r\n\032\032stopped\r\n"

    }

}

# Check for production of a core file and remove it!

set exec_output [remote_exec build "ls core"]

set test "cleanup core file"

if [ regexp "core not found" $exec_output]  {

    pass "$test (not dumped)"

} else {

    if [ regexp "No such file or directory" $exec_output] {

        pass "$test (not dumped)"

    } else {

        remote_exec build "rm -f core"

        pass "$test (removed)"

    }

}

# restore the original prompt for the rest of the testsuite

set gdb_prompt $old_gdb_prompt