Subversion Repositories openrisc

#   Copyright 1997, 1999, 2007, 2008, 2010 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify

# it under the terms of the GNU General Public License as published by

# the Free Software Foundation; either version 3 of the License, or

# (at your option) any later version.

#

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

# GNU General Public License for more details.

#

# You should have received a copy of the GNU General Public License

# along with this program.  If not, see .

# This program tests the 'catch syscall' functionality.

#

# It was written by Sergio Durigan Junior 

# on September/2008.

if { [is_remote target] || ![isnative] } then {

    continue

}

global srcfile

set testfile "catch-syscall"

set srcfile ${testfile}.c

set binfile ${objdir}/${subdir}/${testfile}

# All (but the last) syscalls from the example code

# They are ordered according to the file, so do not change this.

set all_syscalls { "close" "chroot" }

set all_syscalls_numbers { }

# The last syscall (exit()) does not return, so

# we cannot expect the catchpoint to be triggered

# twice.  It is a special case.

set last_syscall "exit_group"

if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {

     untested catch-syscall.exp

     return -1

}

# Until "catch syscall" is implemented on other targets...

if {![istarget "hppa*-hp-hpux*"] && ![istarget "*-linux*"]} then {

    continue

}

# This shall be updated whenever 'catch syscall' is implemented

# on some architecture.

#if { ![istarget "i\[34567\]86-*-linux*"]

if { ![istarget "x86_64-*-linux*"] && ![istarget "i\[34567\]86-*-linux*"]

     && ![istarget "powerpc-*-linux*"] && ![istarget "powerpc64-*-linux*"]

     && ![istarget "sparc-*-linux*"] && ![istarget "sparc64-*-linux*"] } {

     continue

}

# Internal procedure used to check if, after issuing a 'catch syscall'

# command (without arguments), the 'info breakpoints' command displays

# that '"any syscall"' is to be caught.

proc check_info_bp_any_syscall {} {

    global gdb_prompt

    # Verifying that the catchpoint appears in the 'info breakpoints'

    # command, but with "".

    set thistest "catch syscall appears in 'info breakpoints'"

    gdb_test "info breakpoints" ".*catchpoint.*keep y.*syscall \"\".*" $thistest

}

# Internal procedure used to check if, after issuing a 'catch syscall X'

# command (with arguments), the 'info breakpoints' command displays

# that the syscall 'X' is to be caught.

proc check_info_bp_specific_syscall { syscall } {

    global gdb_prompt

    set thistest "syscall(s) $syscall appears in 'info breakpoints'"

    gdb_test "info breakpoints" ".*catchpoint.*keep y.*syscall(\[(\]s\[)\])? (.)?${syscall}(.)?.*" $thistest

}

# Internal procedure used to check if, after issuing a 'catch syscall X'

# command (with many arguments), the 'info breakpoints' command displays

# that the syscalls 'X' are to be caught.

proc check_info_bp_many_syscalls { syscalls } {

    global gdb_prompt

    set filter_str ""

    foreach name $syscalls {

      set filter_str "${filter_str}${name}, "

    }

    set filter_str [ string trimright $filter_str ", " ]

    set thistest "syscalls $filter_str appears in 'info breakpoints'"

    gdb_test "info breakpoints" ".*catchpoint.*keep y.*syscalls (.)?${filter_str}(.)?.*" $thistest

}

# This procedure checks if there was a call to a syscall.

proc check_call_to_syscall { syscall } {

    global gdb_prompt

    set thistest "program has called $syscall"

    gdb_test "continue" "Catchpoint .*(call to syscall .?${syscall}.?).*" $thistest

}

# This procedure checks if the syscall returned.

proc check_return_from_syscall { syscall } {

    global gdb_prompt

    set thistest "syscall $syscall has returned"

    gdb_test "continue" "Catchpoint .*(returned from syscall (.)?${syscall}(.)?).*" $thistest

}

# Internal procedure that performs two 'continue' commands and checks if

# a syscall call AND return occur.

proc check_continue { syscall } {

    global gdb_prompt

    # Testing if the 'continue' stops at the

    # specified syscall_name.  If it does, then it should

    # first print that the infeior has called the syscall,

    # and after print that the syscall has returned.

    # Testing if the inferiorr has called the syscall.

    check_call_to_syscall $syscall

    # And now, that the syscall has returned.

    check_return_from_syscall $syscall

}

# Inserts a syscall catchpoint with an argument.

proc insert_catch_syscall_with_arg { syscall } {

    global gdb_prompt

    # Trying to set the catchpoint

    set thistest "catch syscall with arguments ($syscall)"

    gdb_test "catch syscall $syscall" "Catchpoint .*(syscall (.)?${syscall}(.)?( \[\[0-9\]+\])?).*" $thistest

    check_info_bp_specific_syscall $syscall

}

# Inserts a syscall catchpoint with many arguments.

proc insert_catch_syscall_with_many_args { syscalls numbers } {

    global gdb_prompt

    set catch [ join $syscalls " " ]

    set filter_str ""

    foreach name $syscalls number $numbers {

      set filter_str "${filter_str}'${name}' \[${number}\] "

    }

    set filter_str [ string trimright $filter_str " " ]

    # Trying to set the catchpoint

    set thistest "catch syscall with arguments ($filter_str)"

    gdb_test "catch syscall $catch" "Catchpoint .*(syscalls (.)?${filter_str}(.)?).*" $thistest

    check_info_bp_many_syscalls $syscalls

}

proc check_for_program_end {} {

    global gdb_prompt

    # Deleting the catchpoints

    delete_breakpoints

    set thistest "successful program end"

    gdb_test "continue" "Program exited normally.*" $thistest

}

proc test_catch_syscall_without_args {} {

    global gdb_prompt all_syscalls last_syscall

    # Trying to set the syscall

    set thistest "setting catch syscall without arguments"

    gdb_test "catch syscall" "Catchpoint .*(syscall).*" $thistest

    check_info_bp_any_syscall

    # We have to check every syscall

    foreach name $all_syscalls {

        check_continue $name

    }

    # At last but not least, we check if the inferior

    # has called the last (exit) syscall.

    check_call_to_syscall $last_syscall

    # Now let's see if the inferior correctly finishes.

    check_for_program_end

}

proc test_catch_syscall_with_args {} {

    global gdb_prompt

    set syscall_name "close"

    insert_catch_syscall_with_arg $syscall_name

    # Can we continue until we catch the syscall?

    check_continue $syscall_name

    # Now let's see if the inferior correctly finishes.

    check_for_program_end

}

proc test_catch_syscall_with_many_args {} {

    global gdb_prompt all_syscalls all_syscalls_numbers

    insert_catch_syscall_with_many_args $all_syscalls $all_syscalls_numbers

    # Can we continue until we catch the syscalls?

    foreach name $all_syscalls {

        check_continue $name

    }

    # Now let's see if the inferior correctly finishes.

    check_for_program_end

}

proc test_catch_syscall_with_wrong_args {} {

    global gdb_prompt

    # mlock is not called from the source

    set syscall_name "mlock"

    insert_catch_syscall_with_arg $syscall_name

    # Now, we must verify if the program stops with a continue.

    # If it doesn't, everything is right (since we don't have

    # a syscall named "mlock" in it).  Otherwise, this is a failure.

    set thistest "catch syscall with unused syscall ($syscall_name)"

    gdb_test "continue" "Program exited normally.*" $thistest

}

proc test_catch_syscall_restarting_inferior {} {

    global gdb_prompt

    set syscall_name "chroot"

    insert_catch_syscall_with_arg $syscall_name

    # Let's first reach the call of the syscall.

    check_call_to_syscall $syscall_name

    # Now, restart the program

    rerun_to_main

    # And check for call/return

    check_continue $syscall_name

    # Can we finish?

    check_for_program_end

}

proc test_catch_syscall_fail_nodatadir {} {

    global gdb_prompt

    # Sanitizing.

    delete_breakpoints

    # Make sure GDB doesn't load the syscalls xml from the system data

    # directory.

    gdb_test_no_output "set data-directory /the/path/to/nowhere"

    # Testing to see if we receive a warning when calling "catch syscall"

    # without XML support (without datadir).

    set thistest "Catch syscall displays a warning when there is no XML support (no datadir set)"

    gdb_test "catch syscall" "warning: Could not load the syscall XML file.*warning: GDB will not be able to display syscall names nor to verify if.*any provided syscall numbers are valid.*Catchpoint .*(syscall).*" $thistest

    # Since the catchpoint was set, we must check if it's present at

    # "info breakpoints"

    check_info_bp_any_syscall

    # Sanitizing.

    delete_breakpoints

}

proc do_syscall_tests {} {

    global gdb_prompt srcdir

    # First, we need to set GDB datadir.

    gdb_test_no_output "set data-directory $srcdir/.."

    # Verify that the 'catch syscall' help is available

    set thistest "help catch syscall"

    gdb_test "help catch syscall" "Catch system calls.*" $thistest

    # Try to set a catchpoint to a nonsense syscall

    set thistest "catch syscall to a nonsense syscall is prohibited"

    gdb_test "catch syscall nonsense_syscall" "Unknown syscall name .*" $thistest

    # Testing the 'catch syscall' command without arguments.

    # This test should catch any syscalls.

    if [runto_main] then { test_catch_syscall_without_args }

    # Testing the 'catch syscall' command with arguments.

    # This test should only catch the specified syscall.

    if [runto_main] then { test_catch_syscall_with_args }

    # Testing the 'catch syscall' command with many arguments.

    # This test should catch $all_syscalls.

    if [runto_main] then { test_catch_syscall_with_many_args }

    # Testing the 'catch syscall' command with WRONG arguments.

    # This test should not trigger any catchpoints.

    if [runto_main] then { test_catch_syscall_with_wrong_args }

    # Testing the 'catch' syscall command during a restart of

    # the inferior.

    if [runto_main] then { test_catch_syscall_restarting_inferior }

}

proc test_catch_syscall_without_args_noxml {} {

    # We will need the syscall names even not using it

    # because we need to know know many syscalls are in

    # the example file.

    global gdb_prompt all_syscalls last_syscall

    delete_breakpoints

    set thistest "Catch syscall without arguments and without XML support"

    gdb_test "catch syscall" "Catchpoint .*(syscall).*"

    # Now, we should be able to set a catchpoint,

    # and GDB shall not display the warning anymore.

    foreach name $all_syscalls {

        # Unfortunately, we don't know the syscall number

        # that will be caught because this information is

        # arch-dependent.  Thus, we try to catch anything

        # similar to a number.

        check_continue "\[0-9\]*"

    }

    # At last but not least, we check if the inferior

    # has called the last (exit) syscall.

    check_call_to_syscall "\[0-9\]*"

    delete_breakpoints

}

proc test_catch_syscall_with_args_noxml {} {

    global gdb_prompt

    # The number of the "close" syscall.  This is our

    # option for a "long-estabilished" syscall in all

    # Linux architectures, but unfortunately x86_64 and

    # a few other platforms don't "follow the convention".

    # Because of this, we need this ugly check :-(.

    set close_number ""

    if { [istarget "x86_64-*-linux*"] } {

        set close_number "3"

    } else {

        set close_number "6"

    }

    delete_breakpoints

    insert_catch_syscall_with_arg $close_number

    check_continue $close_number

    delete_breakpoints

}

proc test_catch_syscall_with_wrong_args_noxml {} {

    global gdb_prompt

    delete_breakpoints

    # Even without XML support, GDB should not accept unknown

    # syscall names for the catchpoint.

    set thistest "Catch a nonsense syscall without XML support"

    gdb_test "catch syscall nonsense_syscall" "Unknown syscall name .nonsense_syscall.*" $thistest

    delete_breakpoints

}

proc do_syscall_tests_without_xml {} {

    global gdb_prompt srcdir

    # Make sure GDB doesn't load the syscalls xml from the system data

    # directory.

    gdb_test_no_output "set data-directory /the/path/to/nowhere"

    # Let's test if we can catch syscalls without XML support.

    # We should succeed, but GDB is not supposed to print syscall names.

    if [runto_main] then { test_catch_syscall_without_args_noxml }

    # The only valid argument "catch syscall" should accept is the

    # syscall number, and not the name (since it can't translate a

    # name to a number).

    #

    # It's worth mentioning that we only try to catch the syscall

    # close().  This is because the syscall number is an arch-dependent

    # information, so we can't assume that we know every syscall number

    # in this system.  Therefore, we have decided to use a "long-estabilished"

    # system call, and close() just sounded the right choice :-).

    if [runto_main] then { test_catch_syscall_with_args_noxml }

    # Now, we'll try to provide a syscall name (valid or not) to the command,

    # and expect it to fail.

    if [runto_main] then { test_catch_syscall_with_wrong_args_noxml }

}

# This procedure fills the vector "all_syscalls_numbers" with the proper

# numbers for the used syscalls according to the architecture.

proc fill_all_syscalls_numbers {} {

    global all_syscalls_numbers

    # For Linux on x86, PPC, PPC64, SPARC and SPARC64, the numbers for the syscalls

    # "close" and "chroot" are the same.

    if { [istarget "i\[34567\]86-*-linux*"]

         || [istarget "powerpc-*-linux*"] || [istarget "powerpc64-*-linux*"]

         || [istarget "sparc-*-linux*"] || [istarget "sparc64-*-linux*"] } {

         set all_syscalls_numbers { "6" "61" }

    }

}

# Start with a fresh gdb

gdb_exit

set do_xml_test ![gdb_skip_xml_test]

gdb_start

gdb_reinitialize_dir $srcdir/$subdir

gdb_load ${binfile}

# Execute the tests, using XML support

if $do_xml_test {

  do_syscall_tests

  # Now, we have to see if GDB displays a warning when we

  # don't set the data-directory but try to use catch syscall

  # anyway.  For that, we must restart GDB first.

  gdb_exit

  gdb_start

  gdb_reinitialize_dir $srcdir/$subdir

  gdb_load ${binfile}

  test_catch_syscall_fail_nodatadir

}

# Restart gdb

gdb_exit

gdb_start

gdb_reinitialize_dir $srcdir/$subdir

gdb_load ${binfile}

# Execute the tests, without XML support.  In this case, GDB will

# only display syscall numbers, and not syscall names.

do_syscall_tests_without_xml