Subversion Repositories openrisc

# Copyright 1999, 2000, 2001, 2002, 2003, 2004, 2007, 2008, 2009, 2010

# Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify

# it under the terms of the GNU General Public License as published by

# the Free Software Foundation; either version 3 of the License, or

# (at your option) any later version.

#

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

# GNU General Public License for more details.

#

# You should have received a copy of the GNU General Public License

# along with this program.  If not, see .

#

# Test essential Machine interface (MI) operations

#

# Verify that, using the MI, we can run a simple program and perform basic

# debugging activities like: insert breakpoints, run the program,

# step, next, continue until it ends and, last but not least, quit.

#

# The goal is not to test gdb functionality, which is done by other tests,

# but to verify the correct output response to MI operations.

#

load_lib mi-support.exp

set MIFLAGS "-i=mi2"

gdb_exit

if [mi_gdb_start] {

    continue

}

set testfile "basics"

set srcfile ${testfile}.c

set binfile ${objdir}/${subdir}/mi2-simplerun

if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-DFAKEARGV}] != "" } {

     untested mi2-simplerun.exp

     return -1

}

mi_delete_breakpoints

mi_gdb_reinitialize_dir $srcdir/$subdir

mi_gdb_reinitialize_dir $srcdir/$subdir

mi_gdb_load ${binfile}

proc test_breakpoints_creation_and_listing {} {

    global mi_gdb_prompt

    global srcfile

    global hex

    set line_callee4_head  [gdb_get_line_number "callee4 ("]

    set line_callee4_body  [expr $line_callee4_head + 2]

    set line_callee3_head  [gdb_get_line_number "callee3 ("]

    set line_callee3_body  [expr $line_callee3_head + 2]

    set line_callee2_head  [gdb_get_line_number "callee2 ("]

    set line_callee2_body  [expr $line_callee2_head + 2]

    set line_main_head     [gdb_get_line_number "main ("]

    set line_main_body     [expr $line_main_head + 2]

    # Insert some breakpoints and list them

    # Also, disable some so they do not interfere with other tests

    # Tests:

    # -break-insert

    # -break-list

    # -break-disable

    # -break-info

    mi_create_breakpoint "main" 1 keep main ".*basics.c" $line_main_body $hex \

             "break-insert operation"

    mi_create_breakpoint "basics.c:callee2" 2 keep callee2 ".*basics.c" $line_callee2_body $hex \

             "insert breakpoint at basics.c:callee2"

    mi_create_breakpoint "basics.c:$line_callee3_head" 3 keep callee3 ".*basics.c" $line_callee3_head $hex \

             "insert breakpoint at basics.c:\$line_callee3_head"

    mi_create_breakpoint "\"\\\"${srcfile}\\\":$line_callee4_head\"" 4 keep callee4 ".*basics.c" $line_callee4_head $hex \

             "insert breakpoint at \"\":\$line_callee4_head"

    mi_gdb_test "204-break-list" \

            "204\\^done,BreakpointTable=\{.*,hdr=\\\[.*\\\],body=\\\[bkpt=\{number=\"1\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"main\",file=\".*basics.c\",line=\"$line_main_body\",times=\"0\",original-location=\".*\"\},.*\}\\\]\}" \

                "list of breakpoints"

    mi_gdb_test "205-break-disable 2 3 4" \

                "205\\^done.*" \

                "disabling of breakpoints"

    mi_gdb_test "206-break-info 2" \

            "206\\^done,BreakpointTable=\{.*,hdr=\\\[.*\\\],body=\\\[bkpt=\{number=\"2\",.*,enabled=\"n\",.*\}\\\]\}" \

                "list of breakpoints, 16 disabled"

}

proc test_running_the_program {} {

    global mi_gdb_prompt

    global hex

    set line_main_head     [gdb_get_line_number "main ("]

    set line_main_body     [expr $line_main_head + 2]

    # Run the program without args, then specify srgs and rerun the program

    # Tests:

    # -exec-run

    # -gdb-set

    # mi_gdb_test cannot be used for asynchronous commands because there are

    # two prompts involved and this can lead to a race condition.

    # The following is equivalent to a send_gdb "000-exec-run\n"

    mi_run_cmd

    mi_expect_stop "breakpoint-hit" "main" "" ".*basics.c" "$line_main_body" \

        {"" "disp=\"keep\"" } "run to main"

}

proc test_controlled_execution {} {

    global mi_gdb_prompt

    global hex

    set line_callee4_head         [gdb_get_line_number "callee4 ("]

    set line_callee4_body         [expr $line_callee4_head + 2]

    set line_callee3_head         [gdb_get_line_number "callee3 ("]

    set line_callee3_call         [expr $line_callee3_head + 2]

    set line_callee3_close_brace  [expr $line_callee3_head + 3]

    set line_callee1_head         [gdb_get_line_number "callee1 ("]

    set line_callee1_body         [expr $line_callee1_head + 2]

    set line_main_head            [gdb_get_line_number "main ("]

    set line_main_body            [expr $line_main_head + 2]

    # Continue execution until a breakpoint is reached, step into calls, verifying

    # if the arguments are correctly shown, continue to the end of a called

    # function, step over a call (next).

    # Tests:

    # -exec-continue

    # -exec-next

    # -exec-step

    # -exec-finish

    mi_next_to "main" "" "basics.c" [expr $line_main_body + 1] "next at main"

    # FIXME: A string argument is not printed right; should be fixed and

    #        we should look for the right thing here.

    # NOTE: The ``\\\\\"'' is for \".

    mi_step_to "callee1" \

        "\{name=\"intarg\",value=\"2\"\},\{name=\"strarg\",value=\"$hex \\\\\"A string argument\.\\\\\"\"\},\{name=\"fltarg\",value=\"3.5\"\}" \

        "basics.c" "$line_callee1_body" "step at main"

    # FIXME: A string argument is not printed right; should be fixed and

    #        we should look for the right thing here.

    mi_execute_to "exec-step 3" "end-stepping-range" "callee4" "" \

        "basics.c" $line_callee4_body "" "step to callee4"

    # FIXME: A string argument is not printed right; should be fixed and

    #        we should look for the right thing here.

    # NOTE: The ``.'' is part of ``gdb-result-var="$1"''

    mi_finish_to "callee3" ".*" "basics.c" \

        "($line_callee3_call|$line_callee3_close_brace)" ".1" "0" "exec-finish"

}

proc test_controlling_breakpoints {} {

    global mi_gdb_prompt

    # Enable, delete, set ignore counts in breakpoints

    # (disable was already tested above)

    # Tests:

    # -break-delete

    # -break-enable

    # -break-after

    # -break-condition

}

proc test_program_termination {} {

    global mi_gdb_prompt

    # Run to completion: normal and forced

    # Tests:

    # -exec-abort

    # (normal termination of inferior)

    mi_execute_to "exec-continue" "exited-normally" "" "" "" "" "" "continue to end"

}

test_breakpoints_creation_and_listing

test_running_the_program

test_controlled_execution

test_controlling_breakpoints

test_program_termination

mi_gdb_exit

return 0