OpenCores
URL https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk

Subversion Repositories openrisc_2011-10-31

[/] [openrisc/] [tags/] [gnu-src/] [newlib-1.18.0/] [newlib-1.18.0-or32-1.0rc1/] [libgloss/] [bfin/] [include/] [defBF514.h] - Blame information for rev 207

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 207 jeremybenn
/*
2
 * The authors hereby grant permission to use, copy, modify, distribute,
3
 * and license this software and its documentation for any purpose, provided
4
 * that existing copyright notices are retained in all copies and that this
5
 * notice is included verbatim in any distributions. No written agreement,
6
 * license, or royalty fee is required for any of the authorized uses.
7
 * Modifications to this software may be copyrighted by their authors
8
 * and need not follow the licensing terms described here, provided that
9
 * the new terms are clearly indicated on the first page of each file where
10
 * they apply.
11
 */
12
 
13
/*
14
** Copyright (C) 2009 Analog Devices, Inc.
15
**
16
************************************************************************************
17
**
18
** This include file contains a list of macro "defines" to enable the programmer
19
** to use symbolic names for register-access and bit-manipulation.
20
**
21
**/
22
#ifndef _DEF_BF514_H
23
#define _DEF_BF514_H
24
 
25
/* Include all Core registers and bit definitions */
26
#include <def_LPBlackfin.h>
27
 
28
/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF514 */
29
 
30
/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
31
#include <defBF51x_base.h>
32
 
33
#ifdef _MISRA_RULES
34
#pragma diag(push)
35
#pragma diag(suppress:misra_rule_19_4:"macros violate rule 19.4")
36
#endif /* _MISRA_RULES */
37
 
38
/* The following are the #defines needed by ADSP-BF514 that are not in the common header */
39
 
40
/* RSI Registers */
41
 
42
#define RSI_PWR_CONTROL                 0xFFC03800              /* RSI Power Control Register */
43
/* legacy register name (below) provided for backwards code compatibility */
44
#define SDH_PWR_CTL                     RSI_PWR_CONTROL /* SDH Power Control */
45
#define RSI_CLK_CONTROL                 0xFFC03804              /* RSI Clock Control Register */
46
/* legacy register name (below) provided for backwards code compatibility */
47
#define SDH_CLK_CTL                     RSI_CLK_CONTROL /* SDH Clock Control */
48
#define RSI_ARGUMENT                    0xFFC03808              /* RSI Argument Register */
49
/* legacy register name (below) provided for backwards code compatibility */
50
#define SDH_ARGUMENT                    RSI_ARGUMENT    /* SDH Argument */
51
#define RSI_COMMAND                     0xFFC0380C              /* RSI Command Register */
52
/* legacy register name (below) provided for backwards code compatibility */
53
#define SDH_COMMAND                     RSI_COMMAND             /* SDH Command */
54
#define RSI_RESP_CMD                    0xFFC03810              /* RSI Response Command Register */
55
/* legacy register name (below) provided for backwards code compatibility */
56
#define SDH_RESP_CMD                    RSI_RESP_CMD            /* SDH Response Command */
57
#define RSI_RESPONSE0                   0xFFC03814              /* RSI Response Register */
58
/* legacy register name (below) provided for backwards code compatibility */
59
#define SDH_RESPONSE0                   RSI_RESPONSE0           /* SDH Response0 */
60
#define RSI_RESPONSE1                   0xFFC03818              /* RSI Response Register */
61
/* legacy register name (below) provided for backwards code compatibility */
62
#define SDH_RESPONSE1                   RSI_RESPONSE1           /* SDH Response1 */
63
#define RSI_RESPONSE2                   0xFFC0381C      /* RSI Response Register */
64
/* legacy register name (below) provided for backwards code compatibility */
65
#define SDH_RESPONSE2                   RSI_RESPONSE2           /* SDH Response2 */
66
#define RSI_RESPONSE3                   0xFFC03820              /* RSI Response Register */
67
/* legacy register name (below) provided for backwards code compatibility */
68
#define SDH_RESPONSE3                   RSI_RESPONSE3           /* SDH Response3 */
69
#define RSI_DATA_TIMER                  0xFFC03824              /* RSI Data Timer Register */
70
/* legacy register name (below) provided for backwards code compatibility */
71
#define SDH_DATA_TIMER                  RSI_DATA_TIMER          /* SDH Data Timer */
72
#define RSI_DATA_LGTH                   0xFFC03828              /* RSI Data Length Register */
73
/* legacy register name (below) provided for backwards code compatibility */
74
#define SDH_DATA_LGTH                   RSI_DATA_LGTH           /* SDH Data Length */
75
#define RSI_DATA_CONTROL                0xFFC0382C              /* RSI Data Control Register */
76
/* legacy register name (below) provided for backwards code compatibility */
77
#define SDH_DATA_CTL                    RSI_DATA_CONTROL        /* SDH Data Control */
78
#define RSI_DATA_CNT                    0xFFC03830              /* RSI Data Counter Register */
79
/* legacy register name (below) provided for backwards code compatibility */
80
#define SDH_DATA_CNT                    RSI_DATA_CNT            /* SDH Data Counter */
81
#define RSI_STATUS                      0xFFC03834              /* RSI Status Register */
82
/* legacy register name (below) provided for backwards code compatibility */
83
#define SDH_STATUS                      RSI_STATUS              /* SDH Status */
84
#define RSI_STATUSCL                    0xFFC03838              /* RSI Status Clear Register */
85
/* legacy register name (below) provided for backwards code compatibility */
86
#define SDH_STATUS_CLR                  RSI_STATUSCL            /* SDH Status Clear */
87
#define RSI_MASK0                               0xFFC0383C              /* RSI Interrupt 0 Mask Register */
88
/* legacy register name (below) provided for backwards code compatibility */
89
#define SDH_MASK0                       RSI_MASK0               /* SDH Interrupt0 Mask */
90
#define RSI_MASK1                               0xFFC03840              /* RSI Interrupt 1 Mask Register */
91
/* legacy register name (below) provided for backwards code compatibility */
92
#define SDH_MASK1                       RSI_MASK1               /* SDH Interrupt1 Mask */
93
#define RSI_FIFO_CNT                    0xFFC03848              /* RSI FIFO Counter Register */
94
/* legacy register name (below) provided for backwards code compatibility */
95
#define SDH_FIFO_CNT                    RSI_FIFO_CNT            /* SDH FIFO Counter */
96
#define RSI_CEATA_CONTROL               0xFFC0384C              /* RSI CEATA Register */
97
#define RSI_FIFO                                0xFFC03880              /* RSI Data FIFO Register */
98
/* legacy register name (below) provided for backwards code compatibility */
99
#define SDH_FIFO                        RSI_FIFO                /* SDH Data FIFO */
100
#define RSI_ESTAT                               0xFFC038C0              /* RSI Exception Status Register */
101
/* legacy register name (below) provided for backwards code compatibility */
102
#define SDH_E_STATUS                    RSI_ESTAT               /* SDH Exception Status */
103
#define RSI_EMASK                               0xFFC038C4              /* RSI Exception Mask Register */
104
/* legacy register name (below) provided for backwards code compatibility */
105
#define SDH_E_MASK                      RSI_EMASK               /* SDH Exception Mask */
106
#define RSI_CONFIG                      0xFFC038C8              /* RSI Configuration Register */
107
/* legacy register name (below) provided for backwards code compatibility */
108
#define SDH_CFG                                 RSI_CONFIG              /* SDH Configuration */
109
#define RSI_RD_WAIT_EN                  0xFFC038CC              /* RSI Read Wait Enable Register */
110
/* legacy register name (below) provided for backwards code compatibility */
111
#define SDH_RD_WAIT_EN                  RSI_RD_WAIT_EN          /* SDH Read Wait Enable */
112
#define RSI_PID0                                0xFFC038D0              /* RSI Peripheral ID Register 0 */
113
/* legacy register name (below) provided for backwards code compatibility */
114
#define SDH_PID0                        RSI_PID0                /* SDH Peripheral Identification0 */
115
#define RSI_PID1                                0xFFC038D4              /* RSI Peripheral ID Register 1 */
116
/* legacy register name (below) provided for backwards code compatibility */
117
#define SDH_PID1                        RSI_PID1                /* SDH Peripheral Identification1 */
118
#define RSI_PID2                                0xFFC038D8              /* RSI Peripheral ID Register 2 */
119
/* legacy register name (below) provided for backwards code compatibility */
120
#define SDH_PID2                        RSI_PID2                /* SDH Peripheral Identification2 */
121
#define RSI_PID3                                0xFFC038DC              /* RSI Peripheral ID Register 3 */
122
/* legacy register name (below) provided for backwards code compatibility */
123
#define SDH_PID3                        RSI_PID3                /* SDH Peripheral Identification3 */
124
/* RSI Registers */
125
 
126
 
127
 
128
/* ********************************************************** */
129
/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
130
/*     and MULTI BIT READ MACROS                              */
131
/* ********************************************************** */
132
 
133
/* Bit masks for RSI_PWR_CONTROL */
134
#define                    PWR_ON  0x3                  /* Power On */
135
#define                RSI_CMD_OD  0x40                 /* Open Drain Output */
136
/* legacy bit mask (below) provided for backwards code compatibility */
137
#define                 SD_CMD_OD  RSI_CMD_OD           /* Open Drain Output */
138
/* legacy bit mask (below) provided for backwards code compatibility */
139
#define                nSD_CMD_OD  0x0
140
/* legacy bit mask (below) provided for backwards code compatibility */
141
#if 0
142
#define                       TBD  0x3c                 /* TBD */
143
#endif
144
/* legacy bit mask (below) provided for backwards code compatibility */
145
#define                   ROD_CTL  0x80
146
/* legacy bit mask (below) provided for backwards code compatibility */
147
#define                  nROD_CTL  0x80
148
 
149
 
150
/* Bit masks for RSI_CLK_CONTROL */
151
#define                    CLKDIV  0xff                 /* MC_CLK Divisor */
152
#define                    CLK_EN  0x100                /* MC_CLK Bus Clock Enable */
153
/* legacy bit mask (below) provided for backwards code compatibility */
154
#define                     CLK_E  CLK_EN               /* MC_CLK Bus Clock Enable */
155
/* legacy bit mask (below) provided for backwards code compatibility */
156
#define                    nCLK_E  0x0
157
#define                 PWR_SV_EN  0x200                /* Power Save Enable */
158
/* legacy bit mask (below) provided for backwards code compatibility */
159
#define                  PWR_SV_E  PWR_SV_EN            /* Power Save Enable */
160
/* legacy bit mask (below) provided for backwards code compatibility */
161
#define                 nPWR_SV_E  0x0
162
#define             CLKDIV_BYPASS  0x400                /* Bypass Divisor */
163
/* legacy bit mask (below) provided for backwards code compatibility */
164
#define            nCLKDIV_BYPASS  0x0
165
#define                  BUS_MODE  0x1800           /* Bus width selection */
166
/* legacy bit mask (below) provided for backwards code compatibility */
167
#define                  WIDE_BUS  0x0800       /* Wide Bus Mode Enable */
168
/* legacy bit mask (below) provided for backwards code compatibility */
169
#define                 nWIDE_BUS  0x0
170
 
171
 
172
/* Bit masks for RSI_COMMAND */
173
#define                   CMD_IDX  0x3f                 /* Command Index */
174
#define                CMD_RSP_EN  0x40                 /* Response */
175
/* legacy bit mask (below) provided for backwards code compatibility */
176
#define                   CMD_RSP  CMD_RSP_EN           /* Response */
177
/* legacy bit mask (below) provided for backwards code compatibility */
178
#define                  nCMD_RSP  0x0
179
#define               CMD_LRSP_EN  0x80                 /* Long Response */
180
/* legacy bit mask (below) provided for backwards code compatibility */
181
#define                 CMD_L_RSP  CMD_LRSP_EN          /* Long Response */
182
/* legacy bit mask (below) provided for backwards code compatibility */
183
#define                nCMD_L_RSP  0x0
184
#define                CMD_INT_EN  0x100                /* Command Interrupt */
185
/* legacy bit mask (below) provided for backwards code compatibility */
186
#define                 CMD_INT_E  CMD_INT_EN           /* Command Interrupt */
187
/* legacy bit mask (below) provided for backwards code compatibility */
188
#define                nCMD_INT_E  0x0
189
#define               CMD_PEND_EN  0x200                /* Command Pending */
190
/* legacy bit mask (below) provided for backwards code compatibility */
191
#define                CMD_PEND_E  CMD_PEND_EN          /* Command Pending */
192
/* legacy bit mask (below) provided for backwards code compatibility */
193
#define               nCMD_PEND_E  0x0
194
#define                    CMD_EN  0x400                        /* Command Enable */
195
/* legacy bit mask (below) provided for backwards code compatibility */
196
#define                     CMD_E  CMD_EN               /* Command Enable */
197
/* legacy bit mask (below) provided for backwards code compatibility */
198
#define                    nCMD_E  0x0
199
 
200
 
201
/* Bit masks for RSI_RESP_CMD */
202
#define                  RESP_CMD  0x3f                 /* Response Command */
203
 
204
/* Bit masks for RSI_DATA_LGTH */
205
#define               DATA_LENGTH  0xffff               /* Data Length */
206
 
207
 
208
/* Bit masks for RSI_DATA_CONTROL */
209
#define                   DATA_EN  0x1                  /* Data Transfer Enable */
210
/* legacy bit mask (below) provided for backwards code compatibility */
211
#define                     DTX_E  DATA_EN              /* Data Transfer Enable */
212
/* legacy bit mask (below) provided for backwards code compatibility */
213
#define                    nDTX_E  0x0
214
#define                  DATA_DIR  0x2                  /* Data Transfer Direction */
215
/* legacy bit mask (below) provided for backwards code compatibility */
216
#define                   DTX_DIR  DATA_DIR             /* Data Transfer Direction */
217
/* legacy bit mask (below) provided for backwards code compatibility */
218
#define                  nDTX_DIR  0x0
219
#define                 DATA_MODE  0x4                  /* Data Transfer Mode */
220
/* legacy bit mask (below) provided for backwards code compatibility */
221
#define                  DTX_MODE  DATA_MODE            /* Data Transfer Mode */
222
/* legacy bit mask (below) provided for backwards code compatibility */
223
#define                 nDTX_MODE  0x0
224
#define               DATA_DMA_EN  0x8                  /* Data Transfer DMA Enable */
225
/* legacy bit mask (below) provided for backwards code compatibility */
226
#define                 DTX_DMA_E  0x8                  /* Data Transfer DMA Enable */
227
/* legacy bit mask (below) provided for backwards code compatibility */
228
#define                nDTX_DMA_E  0x0
229
#define             DATA_BLK_LGTH  0xf0                 /* Data Transfer Block Length */
230
/* legacy bit mask (below) provided for backwards code compatibility */
231
#define              DTX_BLK_LGTH  0xf0                 /* Data Transfer Block Length */
232
#define                              CEATA_EN  0x100          /* CE-ATA operation mode enable */
233
#define                          CEATA_CCS_EN  0x200          /* CE-ATA CCS mode enable */
234
 
235
/* Bit masks for RSI_DATA_CNT */
236
#define               DATA_COUNT  0xffff                /* Data Count */
237
 
238
/* Bit masks for RSI_STATUS */
239
#define              CMD_CRC_FAIL  0x1                  /* CMD CRC Fail */
240
/* legacy bit mask (below) provided for backwards code compatibility */
241
#define             nCMD_CRC_FAIL  0x0
242
#define              DAT_CRC_FAIL  0x2                  /* Data CRC Fail */
243
/* legacy bit mask (below) provided for backwards code compatibility */
244
#define             nDAT_CRC_FAIL  0x0
245
#define               CMD_TIMEOUT  0x4                  /* CMD Time Out */
246
/* legacy bit mask (below) provided for backwards code compatibility */
247
#define              nCMD_TIMEOUT  0x0
248
#define               DAT_TIMEOUT  0x8                  /* Data Time Out */
249
/* legacy bit mask (below) provided for backwards code compatibility */
250
#define              nDAT_TIMEOUT  0x0
251
#define               TX_UNDERRUN  0x10                 /* Transmit Underrun */
252
/* legacy bit mask (below) provided for backwards code compatibility */
253
#define              nTX_UNDERRUN  0x0
254
#define                RX_OVERRUN  0x20                 /* Receive Overrun */
255
/* legacy bit mask (below) provided for backwards code compatibility */
256
#define               nRX_OVERRUN  0x0
257
#define              CMD_RESP_END  0x40                 /* CMD Response End */
258
/* legacy bit mask (below) provided for backwards code compatibility */
259
#define             nCMD_RESP_END  0x0
260
#define                  CMD_SENT  0x80                 /* CMD Sent */
261
/* legacy bit mask (below) provided for backwards code compatibility */
262
#define                 nCMD_SENT  0x0
263
#define                   DAT_END  0x100                /* Data End */
264
/* legacy bit mask (below) provided for backwards code compatibility */
265
#define                  nDAT_END  0x0
266
#define             START_BIT_ERR  0x200                /* Start Bit Error */
267
/* legacy bit mask (below) provided for backwards code compatibility */
268
#define            nSTART_BIT_ERR  0x0
269
#define               DAT_BLK_END  0x400                /* Data Block End */
270
/* legacy bit mask (below) provided for backwards code compatibility */
271
#define              nDAT_BLK_END  0x0
272
#define                   CMD_ACT  0x800                /* CMD Active */
273
/* legacy bit mask (below) provided for backwards code compatibility */
274
#define                  nCMD_ACT  0x0
275
#define                    TX_ACT  0x1000               /* Transmit Active */
276
/* legacy bit mask (below) provided for backwards code compatibility */
277
#define                   nTX_ACT  0x0
278
#define                    RX_ACT  0x2000               /* Receive Active */
279
/* legacy bit mask (below) provided for backwards code compatibility */
280
#define                   nRX_ACT  0x0
281
#define              TX_FIFO_STAT  0x4000               /* Transmit FIFO Status */
282
/* legacy bit mask (below) provided for backwards code compatibility */
283
#define             nTX_FIFO_STAT  0x0
284
#define              RX_FIFO_STAT  0x8000               /* Receive FIFO Status */
285
/* legacy bit mask (below) provided for backwards code compatibility */
286
#define             nRX_FIFO_STAT  0x0
287
#define              TX_FIFO_FULL  0x10000              /* Transmit FIFO Full */
288
/* legacy bit mask (below) provided for backwards code compatibility */
289
#define             nTX_FIFO_FULL  0x0
290
#define              RX_FIFO_FULL  0x20000              /* Receive FIFO Full */
291
/* legacy bit mask (below) provided for backwards code compatibility */
292
#define             nRX_FIFO_FULL  0x0
293
#define              TX_FIFO_ZERO  0x40000              /* Transmit FIFO Empty */
294
/* legacy bit mask (below) provided for backwards code compatibility */
295
#define             nTX_FIFO_ZERO  0x0
296
#define               RX_DAT_ZERO  0x80000              /* Receive FIFO Empty */
297
/* legacy bit mask (below) provided for backwards code compatibility */
298
#define              nRX_DAT_ZERO  0x0
299
#define                TX_DAT_RDY  0x100000             /* Transmit Data Available */
300
/* legacy bit mask (below) provided for backwards code compatibility */
301
#define               nTX_DAT_RDY  0x0
302
#define               RX_FIFO_RDY  0x200000             /* Receive Data Available */
303
/* legacy bit mask (below) provided for backwards code compatibility */
304
#define              nRX_FIFO_RDY  0x0
305
 
306
/* Bit masks for RSI_STATCL */
307
#define         CMD_CRC_FAIL_STAT  0x1                  /* CMD CRC Fail Status */
308
/* legacy bit mask (below) provided for backwards code compatibility */
309
#define        nCMD_CRC_FAIL_STAT  0x0
310
#define         DAT_CRC_FAIL_STAT  0x2                  /* Data CRC Fail Status */
311
/* legacy bit mask (below) provided for backwards code compatibility */
312
#define        nDAT_CRC_FAIL_STAT  0x0
313
#define          CMD_TIMEOUT_STAT  0x4                  /* CMD Time Out Status */
314
/* legacy bit mask (below) provided for backwards code compatibility */
315
#define         nCMD_TIMEOUT_STAT  0x0
316
#define          DAT_TIMEOUT_STAT  0x8                  /* Data Time Out status */
317
/* legacy bit mask (below) provided for backwards code compatibility */
318
#define         nDAT_TIMEOUT_STAT  0x0
319
#define          TX_UNDERRUN_STAT  0x10                 /* Transmit Underrun Status */
320
/* legacy bit mask (below) provided for backwards code compatibility */
321
#define         nTX_UNDERRUN_STAT  0x0
322
#define           RX_OVERRUN_STAT  0x20                 /* Receive Overrun Status */
323
/* legacy bit mask (below) provided for backwards code compatibility */
324
#define          nRX_OVERRUN_STAT  0x0
325
#define         CMD_RESP_END_STAT  0x40                 /* CMD Response End Status */
326
/* legacy bit mask (below) provided for backwards code compatibility */
327
#define        nCMD_RESP_END_STAT  0x0
328
#define             CMD_SENT_STAT  0x80                 /* CMD Sent Status */
329
/* legacy bit mask (below) provided for backwards code compatibility */
330
#define            nCMD_SENT_STAT  0x0
331
#define              DAT_END_STAT  0x100                /* Data End Status */
332
/* legacy bit mask (below) provided for backwards code compatibility */
333
#define             nDAT_END_STAT  0x0
334
#define        START_BIT_ERR_STAT  0x200                /* Start Bit Error Status */
335
/* legacy bit mask (below) provided for backwards code compatibility */
336
#define       nSTART_BIT_ERR_STAT  0x0
337
#define          DAT_BLK_END_STAT  0x400                /* Data Block End Status */
338
/* legacy bit mask (below) provided for backwards code compatibility */
339
#define         nDAT_BLK_END_STAT  0x0
340
 
341
/* Bit masks for RSI_MASKx */
342
#define         CMD_CRC_FAIL_MASK  0x1                  /* CMD CRC Fail Mask */
343
/* legacy bit mask (below) provided for backwards code compatibility */
344
#define        nCMD_CRC_FAIL_MASK  0x0
345
#define         DAT_CRC_FAIL_MASK  0x2                  /* Data CRC Fail Mask */
346
/* legacy bit mask (below) provided for backwards code compatibility */
347
#define        nDAT_CRC_FAIL_MASK  0x0
348
#define          CMD_TIMEOUT_MASK  0x4                  /* CMD Time Out Mask */
349
/* legacy bit mask (below) provided for backwards code compatibility */
350
#define         nCMD_TIMEOUT_MASK  0x0
351
#define          DAT_TIMEOUT_MASK  0x8                  /* Data Time Out Mask */
352
/* legacy bit mask (below) provided for backwards code compatibility */
353
#define         nDAT_TIMEOUT_MASK  0x0
354
#define          TX_UNDERRUN_MASK  0x10                 /* Transmit Underrun Mask */
355
/* legacy bit mask (below) provided for backwards code compatibility */
356
#define         nTX_UNDERRUN_MASK  0x0
357
#define           RX_OVERRUN_MASK  0x20                 /* Receive Overrun Mask */
358
/* legacy bit mask (below) provided for backwards code compatibility */
359
#define          nRX_OVERRUN_MASK  0x0
360
#define         CMD_RESP_END_MASK  0x40                 /* CMD Response End Mask */
361
/* legacy bit mask (below) provided for backwards code compatibility */
362
#define        nCMD_RESP_END_MASK  0x0
363
#define             CMD_SENT_MASK  0x80                 /* CMD Sent Mask */
364
/* legacy bit mask (below) provided for backwards code compatibility */
365
#define            nCMD_SENT_MASK  0x0
366
#define              DAT_END_MASK  0x100                /* Data End Mask */
367
/* legacy bit mask (below) provided for backwards code compatibility */
368
#define             nDAT_END_MASK  0x0
369
#define        START_BIT_ERR_MASK  0x200                /* Start Bit Error Mask */
370
/* legacy bit mask (below) provided for backwards code compatibility */
371
#define       nSTART_BIT_ERR_MASK  0x0
372
#define          DAT_BLK_END_MASK  0x400                /* Data Block End Mask */
373
/* legacy bit mask (below) provided for backwards code compatibility */
374
#define         nDAT_BLK_END_MASK  0x0
375
#define              CMD_ACT_MASK  0x800                /* CMD Active Mask */
376
/* legacy bit mask (below) provided for backwards code compatibility */
377
#define             nCMD_ACT_MASK  0x0
378
#define               TX_ACT_MASK  0x1000               /* Transmit Active Mask */
379
/* legacy bit mask (below) provided for backwards code compatibility */
380
#define              nTX_ACT_MASK  0x0
381
#define               RX_ACT_MASK  0x2000               /* Receive Active Mask */
382
/* legacy bit mask (below) provided for backwards code compatibility */
383
#define              nRX_ACT_MASK  0x0
384
#define         TX_FIFO_STAT_MASK  0x4000               /* Transmit FIFO Status Mask */
385
/* legacy bit mask (below) provided for backwards code compatibility */
386
#define        nTX_FIFO_STAT_MASK  0x0
387
#define         RX_FIFO_STAT_MASK  0x8000               /* Receive FIFO Status Mask */
388
/* legacy bit mask (below) provided for backwards code compatibility */
389
#define        nRX_FIFO_STAT_MASK  0x0
390
#define         TX_FIFO_FULL_MASK  0x10000              /* Transmit FIFO Full Mask */
391
/* legacy bit mask (below) provided for backwards code compatibility */
392
#define        nTX_FIFO_FULL_MASK  0x0
393
#define         RX_FIFO_FULL_MASK  0x20000              /* Receive FIFO Full Mask */
394
/* legacy bit mask (below) provided for backwards code compatibility */
395
#define        nRX_FIFO_FULL_MASK  0x0
396
#define         TX_FIFO_ZERO_MASK  0x40000              /* Transmit FIFO Empty Mask */
397
/* legacy bit mask (below) provided for backwards code compatibility */
398
#define        nTX_FIFO_ZERO_MASK  0x0
399
#define          RX_DAT_ZERO_MASK  0x80000              /* Receive FIFO Empty Mask */
400
/* legacy bit mask (below) provided for backwards code compatibility */
401
#define         nRX_DAT_ZERO_MASK  0x0
402
#define           TX_DAT_RDY_MASK  0x100000             /* Transmit Data Available Mask */
403
/* legacy bit mask (below) provided for backwards code compatibility */
404
#define          nTX_DAT_RDY_MASK  0x0
405
#define          RX_FIFO_RDY_MASK  0x200000             /* Receive Data Available Mask */
406
/* legacy bit mask (below) provided for backwards code compatibility */
407
#define         nRX_FIFO_RDY_MASK  0x0
408
 
409
/* Bit masks for RSI_FIFO_CNT */
410
#define                FIFO_COUNT  0x7fff               /* FIFO Count */
411
 
412
/* Bit masks for RSI_CEATA_CONTROL */
413
#define           CEATA_TX_CCSD  0x1                    /* Send CE-ATA CCSD sequence */
414
 
415
/* Bit masks for RSI_ESTAT */
416
#define              SDIO_INT_DET  0x2                  /* SDIO Int Detected */
417
/* legacy bit mask (below) provided for backwards code compatibility */
418
#define             nSDIO_INT_DET  0x0
419
#define               SD_CARD_DET  0x10                 /* SD Card Detect */
420
/* legacy bit mask (below) provided for backwards code compatibility */
421
#define              nSD_CARD_DET  0x0
422
#define             CEATA_INT_DET  0x20
423
 
424
/* Bit masks for RSI_EMASK */
425
#define         SDIO_INT_DET_MASK  0x2                /* Mask SDIO Int Detected */
426
/* legacy bit mask (below) provided for backwards code compatibility */
427
#define                  SDIO_MSK  SDIO_INT_DET_MASK  /* Mask SDIO Int Detected */
428
/* legacy bit mask (below) provided for backwards code compatibility */
429
#define                 nSDIO_MSK  0x0
430
#define          SD_CARD_DET_MASK  0x10               /* Mask Card Detect */
431
/* legacy bit mask (below) provided for backwards code compatibility */
432
#define                  SCD_MASK  SD_CARD_DET_MASK   /* Mask Card Detect */
433
/* legacy bit mask (below) provided for backwards code compatibility */
434
#define                  nSCD_MSK  0x0
435
#define        CEATA_INT_DET_MASK  0x20
436
 
437
 
438
/* Bit masks for RSI_CFG */
439
/* Left in for backwards compatibility */
440
#define                RSI_CLK_EN  0x1
441
/* legacy bit mask (below) provided for backwards code compatibility */
442
#define                   CLKS_EN  RSI_CLK_EN           /* Clocks Enable */
443
/* legacy bit mask (below) provided for backwards code compatibility */
444
#define                  nCLKS_EN  0x0
445
#define                  SDIO4_EN  0x4                  /* SDIO 4-Bit Enable */
446
/* legacy bit mask (below) provided for backwards code compatibility */
447
#define                      SD4E  SDIO4_EN             /* SDIO 4-Bit Enable */
448
/* legacy bit mask (below) provided for backwards code compatibility */
449
#define                     nSD4E  0x0
450
#define                     MW_EN  0x8                  /* Moving Window Enable */
451
/* legacy bit mask (below) provided for backwards code compatibility */
452
#define                       MWE  MW_EN                /* Moving Window Enable */
453
/* legacy bit mask (below) provided for backwards code compatibility */
454
#define                      nMWE  0x0
455
#define                   RSI_RST  0x10                 /* SDMMC Reset */
456
/* legacy bit mask (below) provided for backwards code compatibility */
457
#define                    SD_RST  RSI_RST              /* SDMMC Reset */
458
/* legacy bit mask (below) provided for backwards code compatibility */
459
#define                   nSD_RST  0x0
460
#define                    PU_DAT  0x20                 /* Pull-up SD_DAT */
461
/* legacy bit mask (below) provided for backwards code compatibility */
462
#define                 PUP_SDDAT  PU_DAT               /* Pull-up SD_DAT */
463
/* legacy bit mask (below) provided for backwards code compatibility */
464
#define                nPUP_SDDAT  0x0
465
#define                   PU_DAT3  0x40                 /* Pull-up SD_DAT3 */
466
/* legacy bit mask (below) provided for backwards code compatibility */
467
#define                PUP_SDDAT3  PU_DAT3              /* Pull-up SD_DAT3 */
468
/* legacy bit mask (below) provided for backwards code compatibility */
469
#define               nPUP_SDDAT3  0x0
470
#define                   PD_DAT3  0x80                 /* Pull-down SD_DAT3 */
471
/* legacy bit mask (below) provided for backwards code compatibility */
472
#define                 PD_SDDAT3  PD_DAT3              /* Pull-down SD_DAT3 */
473
/* legacy bit mask (below) provided for backwards code compatibility */
474
#define                nPD_SDDAT3  0x0
475
 
476
 
477
/* Bit masks for RSI_RD_WAIT_EN */
478
#define                  SDIO_RWR  0x1                  /* Read Wait Request */
479
/* legacy bit mask (below) provided for backwards code compatibility */
480
#define                       RWR  SDIO_RWR             /* Read Wait Request */
481
/* legacy bit mask (below) provided for backwards code compatibility */
482
#define                      nRWR  0x0
483
 
484
/* Bit masks for RSI_PIDx */
485
#define                   RSI_PID  0xff                 /* RSI Peripheral ID */
486
#ifdef _MISRA_RULES
487
#pragma diag(pop)
488
#endif /* _MISRA_RULES */
489
 
490
#endif /* _DEF_BF514_H */

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.