Subversion Repositories openrisc

\documentstyle[10pt]{letter}

\topmargin -2cm

\textwidth 19cm

\textheight 28cm

\hoffset -2cm

\begin{document}

\newcommand{\addorpcmd}[3]{{\small\tt#1}\hfil&{\small\tt #2}\hfil&{\small\rm#3}\hfil\\}

\thispagestyle{empty}

\begin{centering}

\noindent{\large{\bf ORP Monitor Quick Reference}\\\ \\}

\noindent

\begin{tabular}{lp{5cm}p{7cm}}\hline

{\bf Command} & {\bf Parameters} & {\bf Description} \\ \hline\hline

\addorpcmd{help}{}{shows help}

\addorpcmd{dm}{$<$start addr$>$ [$<$end addr$>$]}{display 32-bit memory location(s)}

\addorpcmd{pm}{$<$addr$>$ [$<$stop\_addr$>$] $<$value$>$}{patch 32-bit memory location(s)}

\addorpcmd{copy}{[$<$dst\_addr$>$ [$<$src\_addr [$<$length$>$]]]}{copy memory}

\addorpcmd{mfspr}{$<$spr\_addr$>$}{show SPR}

\addorpcmd{mtspr}{$<$spr\_addr$>$ $<$value$>$}{set SPR}

\hline

\addorpcmd{crc}{[$<$src\_addr$>$ [$<$length$>$ [$<$init\_crc$>$]]]}{calculates a 32-bit CRC on specified memory region}

\addorpcmd{tftp}{[$<$file$>$ [$<$srv\_ip$>$ [$<$src\_addr$>$]]]}{TFTP download}

\addorpcmd{ic\_enable}{}{enable instruction cache}

\addorpcmd{ic\_disable}{}{disable instruction cache}

\addorpcmd{dc\_enable}{}{enable data cache}

\addorpcmd{dc\_disable}{}{disable data cache}

\addorpcmd{ram\_test}{$<$start\_addr$>$ $<$stop\_addr$>$ [$<$test\_no$>$]}{run a simple RAM test}

\addorpcmd{dhry}{[$<$num\_runs$>$]}{run dhrystone}

\hline

\addorpcmd{globals}{}{show globals and their current values}

\addorpcmd{src\_addr}{$<$value$>$}{sets global parameter source address}

\addorpcmd{dst\_addr}{$<$value$>$}{sets global parameter destination address}

\addorpcmd{start\_addr}{$<$value$>$}{sets global parameter start address}

\addorpcmd{length}{$<$value$>$}{sets global parameter {\tt length}}

\addorpcmd{erase\_method}{$<$value$>$ $<$value$>$ $<$value$>$}{sets flash erase method global parameter (0=do~not~erase, 1=fully, 2=as~needed)}

\addorpcmd{set\_dest\_addr}{$<$addrhi$>$ $<$addrmid$>$ $<$addrlo$>$}{set destination address global parameter}

\addorpcmd{ip}{$<$value$>$ $<$value$>$ $<$value$>$}{sets {\tt ip} address global parameter}

\addorpcmd{srv\_ip}{$<$value$>$ $<$value$>$ $<$value$>$}{sets server ip address global parameter}

\hline

\addorpcmd{eth\_init}{}{init ethernet}

\addorpcmd{show\_txbd}{[$<$start BD$>$] [$<$max$>$]}{show Tx buffer desc}

\addorpcmd{show\_rxbd}{[$<$start BD$>$] [$<$max$>$]}{show Rx buffer desc}

\addorpcmd{send\_packet}{$<$length$>$ [$<$start data$>$] [$<$num\_of\_packets$>$]}{create and send packet(s)}

\addorpcmd{init\_txbd\_pool}{$<$max$>$}{initialize Tx buffer descriptors}

\addorpcmd{init\_rxbd\_pool}{$<$max$>$}{initialize Rx buffer descriptors}

\addorpcmd{show\_phy\_reg}{[$<$start\_addr$>$] [$<$end addr$>$]}{show PHY registers}

\addorpcmd{set\_phy\_reg}{$<$addr$>$ $<$value$>$}{set PHY register}

\addorpcmd{show\_mac\_regs}{}{show all MAC registers}

\addorpcmd{eth\_int\_enable}{}{enable ethernet interrupt}

\addorpcmd{show\_rx\_buffs}{[$<$show\_all$>$]}{show receive buffers (optional argument will also show empty buffers)}

\addorpcmd{show\_tx\_buffs}{}{show transmit buffers}

\hline

\addorpcmd{crt\_enable}{}{enables CRT}

\addorpcmd{crt\_disable}{}{disables CRT}

\addorpcmd{crt\_test}{}{enables CRT and displays some test patterns}

\addorpcmd{camera\_enable}{}{enables camera}

\addorpcmd{camera\_disable}{}{disables camera}

\hline

\end{tabular}

\end{centering}

\end{document}