URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [bootloaders/] [orpmon/] [drivers/] [eth.c] - Blame information for rev 481

Go to most recent revision | Details | Compare with Previous | View Log


#include "board.h"
#if OC_LAN==1
 
#include "common.h"
#include "support.h"
#include "uart.h"
#include "eth.h"
#include "int.h"
#include "spr-defs.h"
 
//#define PRINT_PACKETS
//#define ETHPHY_10MBPS
//#define ETHPHY_RESET_ON_INIT
 
extern int printf (const char *fmt, ...);
extern void lolev_ie(void);
extern void lolev_idis(void);
 
int tx_next;  /* Next buffer to be given to the user */
int tx_last;  /* Next buffer to be checked if packet sent */
int tx_full;
int rx_next;  /* Next buffer to be checked for new packet and given to the user */
void (*receive)(volatile unsigned char *add, int len); /* Pointer to function to be called
                                        when frame is received */
int eth_monitor_enabled;
 
static void
print_packet(unsigned long add, int len)
{
  int truncate = (len > 256);
  int length_to_print = truncate ? 256 : len;
 
  int i;
  printf("\nipacket: add = %lx len = %d\n", add, len);
  for(i = 0; i < length_to_print; i++) {
    if(!(i % 8))
      printf(" ");
    if(!(i % 16))
      printf("\n");
    printf(" %.2x", *(((unsigned char *)add) + i));
 
  }
  printf("\n");
 
  if (truncate)
    printf("\ttruncated....\n");
  /*
  int i;
  printf("ipacket: add = %lx len = %d\n", add, len);
  for(i = 0; i < len; i++) {
      if(!(i % 16)) printf("\n");
      else if(!(i % 8)) printf(" "); // space here, so output is like wireshark
      printf(" %.2x", *(((unsigned char *)add) + i));
  }
  printf("\n");
  */
}
 
void init_tx_bd_pool(void)
{
  eth_bd  *bd;
  int i;
  unsigned long eth_data_base = ETH_DATA_BASE;
 
  bd = (eth_bd *)ETH_BD_BASE;
 
  for(i = 0; i < ETH_TXBD_NUM; i++) {
    /* Set Tx BD status */
    bd[i].len_status = 0 << 16 | ETH_TX_BD_PAD | ETH_TX_BD_CRC | ETH_RX_BD_IRQ;
 
    /* Initialize Tx buffer pointer */
    bd[i].addr = eth_data_base + (i * ETH_MAXBUF_LEN);
  }
 
  bd[i-1].len_status |= ETH_TX_BD_WRAP; // Last Tx BD - Wrap
}
 
void init_rx_bd_pool(void)
{
  eth_bd  *bd;
  int i;
  /* Set ethernet data buffers just above that of stack */
  unsigned long eth_data_base = ETH_DATA_BASE;
 
  bd = (eth_bd *)ETH_BD_BASE + ETH_TXBD_NUM;
 
  for(i = 0; i < ETH_RXBD_NUM; i++){
 
    /* Set Rx BD status */
    bd[i].len_status = 0 << 16 | ETH_RX_BD_EMPTY | ETH_RX_BD_IRQ;
 
    /* Initialize Rx buffer pointer */
    bd[i].addr = eth_data_base + ((ETH_TXBD_NUM + i) * ETH_MAXBUF_LEN);
  }
 
  bd[i-1].len_status |= ETH_RX_BD_WRAP; // Last Rx BD - Wrap
}
 
 
void eth_traffic_monitor(void)
{
 volatile oeth_regs *regs;
  regs = (oeth_regs *)(ETH_REG_BASE);
 
  uint  int_events;
  int serviced;
  int i;
 
  serviced = 0;
 
  /* Get the interrupt events that caused us to be here.
   */
  int_events = regs->int_src;
  regs->int_src = int_events;
 
  printf("\n=tx_ | %x | %x | %x | %x | %x | %x | %x | %x\n",
         ((oeth_bd *)(ETH_BD_BASE))->len_status,
         ((oeth_bd *)(ETH_BD_BASE+8))->len_status,
         ((oeth_bd *)(ETH_BD_BASE+16))->len_status,
         ((oeth_bd *)(ETH_BD_BASE+24))->len_status,
         ((oeth_bd *)(ETH_BD_BASE+32))->len_status,
         ((oeth_bd *)(ETH_BD_BASE+40))->len_status,
         ((oeth_bd *)(ETH_BD_BASE+48))->len_status,
         ((oeth_bd *)(ETH_BD_BASE+56))->len_status);
 
  printf("=rx_ | %x | %x | %x | %x | %x | %x | %x | %x\n",
         ((oeth_bd *)(ETH_BD_BASE+64))->len_status,
         ((oeth_bd *)(ETH_BD_BASE+64+8))->len_status,
         ((oeth_bd *)(ETH_BD_BASE+64+16))->len_status,
         ((oeth_bd *)(ETH_BD_BASE+64+24))->len_status,
         ((oeth_bd *)(ETH_BD_BASE+64+32))->len_status,
         ((oeth_bd *)(ETH_BD_BASE+64+40))->len_status,
         ((oeth_bd *)(ETH_BD_BASE+64+48))->len_status,
         ((oeth_bd *)(ETH_BD_BASE+64+56))->len_status);
 
  printf("=int | txb %d | txe %d | rxb %d | rxe %d | busy %d\n",
         (int_events & ETH_INT_TXB) > 0,
         (int_events & ETH_INT_TXE) > 0,
         (int_events & ETH_INT_RXF) > 0,
         (int_events & ETH_INT_RXE) > 0,
         (int_events & ETH_INT_BUSY) > 0);
 
 
  /* Check for receive busy, i.e. packets coming but no place to
   * put them.
   */
  if (int_events & ETH_INT_BUSY ) {
    serviced |= 0x4;
    printf("eth: busy!");
  }
 
  /* Handle receive event
   */
  if (int_events & (ETH_INT_RXF | ETH_INT_RXE)) {
    serviced |= 0x1;
    volatile oeth_bd *rx_bdp;
    rx_bdp = ((oeth_bd *)ETH_BD_BASE) + ETH_TXBD_NUM;
    /* Find RX buffers marked as having received data */
    for(i = 0; i < ETH_RXBD_NUM; i++)
      {
        if(!(rx_bdp[i].len_status & ETH_RX_BD_EMPTY))
          {
            print_packet(rx_bdp[i].addr, rx_bdp[i].len_status >> 16);
            rx_bdp[i].len_status &= ~ETH_RX_BD_STATS;  /* Clear stats */
            rx_bdp[i].len_status |= ETH_RX_BD_EMPTY; /* Mark RX BD as empty */
          }
      }
  }
 
  /* Handle transmit event
   */
  if (int_events & (ETH_INT_TXB | ETH_INT_TXE)) {
    serviced |= 0x2;
    volatile oeth_bd *tx_bd;
    tx_bd = (volatile oeth_bd *)ETH_BD_BASE; /* Search from beginning*/
    for(i = 0; i < ETH_TXBD_NUM; i++)
      {
        /* Looking for buffer NOT ready for transmit */
        if((!(tx_bd[i].len_status & (ETH_TX_BD_READY))) &&
           (tx_bd[i].len_status & (ETH_TX_BD_IRQ)))
          {
            print_packet(tx_bd[i].addr, (tx_bd[i].len_status >> 16));
            tx_bd[i].len_status &= ~ETH_TX_BD_IRQ;
          }
      }
 
  }
 
  if (serviced == 0)
    printf("\neth interrupt called but nothing serviced\n");
 
}
 
 
/* Ethernet interrupt handler */
void eth_int (void)
{
  printf("eth-int!\n");
  if (eth_monitor_enabled)
    eth_traffic_monitor();
  //REG32(ETH_REG_BASE + ETH_INT) = 0xffffffff;
 
}
 
void eth_reset_phy(void)
{
  /* Reset Eth PHY via MDIO*/
  printf("Resetting PHY, waiting for link");
  REG32(ETH_REG_BASE + ETH_MIIADDRESS) = (0<<8)|(ETH_MDIOPHYADDR&0xff);
  REG32(ETH_REG_BASE + ETH_MIITX_DATA) = 0x8000; // Bit 15 = 1: RESET
  REG32(ETH_REG_BASE + ETH_MIICOMMAND) = ETH_MIICOMMAND_WCTRLDATA;
  while(REG32(ETH_REG_BASE + ETH_MIISTATUS) & ETH_MIISTATUS_BUSY);
 
  sleep(100);
 
  while(1){
    printf(".");
    REG32(ETH_REG_BASE + ETH_MIIADDRESS) = (0<<8)|(ETH_MDIOPHYADDR&0xff);
    REG32(ETH_REG_BASE + ETH_MIICOMMAND) = ETH_MIICOMMAND_RSTAT;
    while(REG32(ETH_REG_BASE + ETH_MIISTATUS) & ETH_MIISTATUS_BUSY);
    if(!(REG32(ETH_REG_BASE + ETH_MIIRX_DATA) & 0x8000)) // If reset clear
      break;
  }
}
 
 
void eth_init (void (*rec)(volatile unsigned char *, int))
{
  /* Reset ethernet core */
  REG32(ETH_REG_BASE + ETH_MODER) = ETH_MODER_RST;    /* Reset ON */
  REG32(ETH_REG_BASE + ETH_MODER) &= ~ETH_MODER_RST;  /* Reset OFF */
 
#ifdef ETHPHY_RESET_ON_INIT
  REG32(ETH_REG_BASE + ETH_MIIADDRESS) = 0<<8; // BMCR reg
  REG32(ETH_REG_BASE + ETH_MIITX_DATA) = 0x8000; // RESET bit
  REG32(ETH_REG_BASE + ETH_MIICOMMAND) = ETH_MIICOMMAND_WCTRLDATA;
  while(REG32(ETH_REG_BASE + ETH_MIISTATUS) & ETH_MIISTATUS_BUSY);
 
  while(1){
    REG32(ETH_REG_BASE + ETH_MIIADDRESS) = 1<<8;
    REG32(ETH_REG_BASE + ETH_MIICOMMAND) = ETH_MIICOMMAND_RSTAT;
    while(REG32(ETH_REG_BASE + ETH_MIISTATUS) & ETH_MIISTATUS_BUSY);
    if(REG32(ETH_REG_BASE + ETH_MIIRX_DATA) & 0x04)
      break;
  }
#endif
 
#ifdef ETHPHY_10MBPS
  // Set PHY to 10 Mbps full duplex
  REG32(ETH_REG_BASE + ETH_MIIADDRESS) = 0<<8;
  REG32(ETH_REG_BASE + ETH_MIITX_DATA) = 0x0100;
  REG32(ETH_REG_BASE + ETH_MIICOMMAND) = ETH_MIICOMMAND_WCTRLDATA;
  while(REG32(ETH_REG_BASE + ETH_MIISTATUS) & ETH_MIISTATUS_BUSY);
 
  while(1){
    REG32(ETH_REG_BASE + ETH_MIIADDRESS) = 1<<8;
    REG32(ETH_REG_BASE + ETH_MIICOMMAND) = ETH_MIICOMMAND_RSTAT;
    while(REG32(ETH_REG_BASE + ETH_MIISTATUS) & ETH_MIISTATUS_BUSY);
    if(REG32(ETH_REG_BASE + ETH_MIIRX_DATA) & 0x04)
      break;
  }
 
#endif
 
 
  /* Setting TX BD number */
  REG32(ETH_REG_BASE + ETH_TX_BD_NUM) = ETH_TXBD_NUM;
 
  /* Set min/max packet length */
  REG32(ETH_REG_BASE + ETH_PACKETLEN) = 0x00400600;
 
  /* Set IPGT register to recomended value */
  REG32(ETH_REG_BASE + ETH_IPGT) =  0x00000012;
 
  /* Set IPGR1 register to recomended value */
  REG32(ETH_REG_BASE + ETH_IPGR1) =  0x0000000c;
 
  /* Set IPGR2 register to recomended value */
  REG32(ETH_REG_BASE + ETH_IPGR2) =  0x00000012;
 
  /* Set COLLCONF register to recomended value */
  REG32(ETH_REG_BASE + ETH_COLLCONF) =  0x000f003f;
 
#if 0
  REG32(ETH_REG_BASE + ETH_CTRLMODER) = ETH_CTRLMODER_TXFLOW | ETH_CTRLMODER_RXFLOW;
#else
  REG32(ETH_REG_BASE + ETH_CTRLMODER) = 0;
#endif
 
  /* Initialize RX and TX buffer descriptors */
  init_rx_bd_pool();
  init_tx_bd_pool();
 
  /* Initialize tx pointers */
  tx_next = 0;
  tx_last = 0;
  tx_full = 0;
 
  /* Initialize rx pointers */
  rx_next = 0;
 
  /* Assign receive function pointer to what we were passed */
  receive = rec;
 
  /* Set local MAC address */
  REG32(ETH_REG_BASE + ETH_MAC_ADDR1) = ETH_MACADDR0 << 8 |
            ETH_MACADDR1;
  REG32(ETH_REG_BASE + ETH_MAC_ADDR0) = ETH_MACADDR2 << 24 |
            ETH_MACADDR3 << 16 |
            ETH_MACADDR4 << 8 |
            ETH_MACADDR5;
 
  /* Clear all pending interrupts */
  REG32(ETH_REG_BASE + ETH_INT) = 0xffffffff;
 
  /* Register interrupt handler */
  int_add (ETH_IRQ, eth_int);
 
  /* Promisc, IFG, CRCEn */
  REG32(ETH_REG_BASE + ETH_MODER) |= ETH_MODER_PAD | ETH_MODER_IFG | ETH_MODER_CRCEN;
 
  /* Enable interrupt sources */
#if 0
  REG32(ETH_REG_BASE + ETH_INT_MASK)= ETH_INT_MASK_TXB        |
                   ETH_INT_MASK_TXE        |
                   ETH_INT_MASK_RXF        |
                   ETH_INT_MASK_RXE        |
                   ETH_INT_MASK_BUSY       |
                   ETH_INT_MASK_TXC        |
                   ETH_INT_MASK_RXC;
  eth_monitor_enabled = 1;
#else
  REG32(ETH_REG_BASE + ETH_INT_MASK) = 0x00000000;
  printf("eth_init: monitor disabled at startup\n");
  eth_monitor_enabled = 0;
#endif
 
  /* Enable receiver and transmiter */
  REG32(ETH_REG_BASE + ETH_MODER) |= ETH_MODER_RXEN | ETH_MODER_TXEN;
 
}
 
/* Returns pointer to next free buffer; NULL if none available */
void *eth_get_tx_buf ()
{
  eth_bd  *bd;
  unsigned long add;
 
  if(tx_full)
    return (void *)0;
 
  bd = (eth_bd *)ETH_BD_BASE;
 
  if(bd[tx_next].len_status & ETH_TX_BD_READY)
    return (void *)0;
 
  add = bd[tx_next].addr;
 
  tx_next++;
 
  if (tx_next == ETH_TXBD_NUM)
    tx_next = 0;
 
  // Disabled for now - highly unlikely we'll ever run out of TX buffer spots
  //if(tx_next == tx_last)
  //tx_full = 1;
 
  return (void *)add;
}
 
/* Send a packet at address */
void eth_send (void *buf, unsigned long len)
{
    eth_bd  *bd;
    int i;
 
#ifdef PRINT_PACKETS  
    printf("transmitted packet txbd %d:\t", tx_last);
  print_packet(buf, len);
#endif
 
  bd = (eth_bd *)ETH_BD_BASE;
 
  bd[tx_last].addr = (unsigned long)buf;
 
 retry_eth_send:
  bd[tx_last].len_status &= 0x0000ffff & ~ETH_TX_BD_STATS;
 
  if (eth_monitor_enabled) // enable IRQ when sending
    bd[tx_last].len_status |= ETH_TX_BD_IRQ;
 
  bd[tx_last].len_status |= len << 16 | ETH_TX_BD_READY;
 
  if (!eth_monitor_enabled) // If we're not running the network sniffer...
    {
      while (bd[tx_last].len_status & ETH_TX_BD_READY);
 
      //printf("packet tx\n");
      // Check it was sent OK 
      /*
        BUG with current implementation - constantly getting carrier sense
        lost, and deferred indication, so ignore it for now.
      if ( bd[tx_last].len_status & 0xf)
        {
          printf("eth_send: carrier sense lost (txbd: 0x%x), deferred, retrying\n",
                 bd[tx_last].len_status);
          sleep(1);
          goto retry_eth_send;
        }
      */
    }
 
  tx_last++;
 
  if (tx_last == ETH_TXBD_NUM)
    tx_last = 0;
 
  tx_full = 0;
 
}
 
/* Waits for packet and pass it to the upper layers */
unsigned long
eth_rx (void)
{
  eth_bd  *bd;
  unsigned long len = 0;
  int i;
 
  bd = (eth_bd *)ETH_BD_BASE + ETH_TXBD_NUM;
 
  while(1) {
 
    int bad = 0;
 
    if(bd[rx_next].len_status & ETH_RX_BD_EMPTY)
      return len;
 
    if(bd[rx_next].len_status & ETH_RX_BD_OVERRUN) {
      printf("eth rx: ETH_RX_BD_OVERRUN\n");
      bad = 1;
    }
    if(bd[rx_next].len_status & ETH_RX_BD_INVSIMB) {
      printf("eth rx: ETH_RX_BD_INVSIMB\n");
      bad = 1;
    }
    if(bd[rx_next].len_status & ETH_RX_BD_DRIBBLE) {
      printf("eth rx: ETH_RX_BD_DRIBBLE\n");
      bad = 1;
    }
    if(bd[rx_next].len_status & ETH_RX_BD_TOOLONG) {
      printf("eth rx: ETH_RX_BD_TOOLONG\n");
      bad = 1;
    }
    if(bd[rx_next].len_status & ETH_RX_BD_SHORT) {
      printf("eth rx: ETH_RX_BD_SHORT\n");
      bad = 1;
    }
    if(bd[rx_next].len_status & ETH_RX_BD_CRCERR) {
      printf("eth rx: ETH_RX_BD_CRCERR\n");
      bad = 1;
    }
    if(bd[rx_next].len_status & ETH_RX_BD_LATECOL) {
      printf("eth rx: ETH_RX_BD_LATECOL\n");
      bad = 1;
    }
 
    if(!bad) {
#ifdef PRINT_PACKETS
      printf("received packet: rxbd %d\t",rx_next);
      print_packet(bd[rx_next].addr, bd[rx_next].len_status >> 16);
#endif
 
      receive((void *)bd[rx_next].addr, bd[rx_next].len_status >> 16);
      len += bd[rx_next].len_status >> 16;
    }
 
    bd[rx_next].len_status &= ~ETH_RX_BD_STATS;
    bd[rx_next].len_status |= ETH_RX_BD_EMPTY;
 
    rx_next++;
 
    if (rx_next == ETH_RXBD_NUM)
      rx_next = 0;
  }
}
 
void eth_int_enable(void)
{
  REG32(ETH_REG_BASE + ETH_INT_MASK) =  ETH_INT_MASK_TXB        |
                                        ETH_INT_MASK_TXE        |
                                        ETH_INT_MASK_RXF        |
                                        ETH_INT_MASK_RXE        |
                                        ETH_INT_MASK_BUSY       |
                                        ETH_INT_MASK_TXC        |
                                        ETH_INT_MASK_RXC;
}
 
void eth_int_disable(void)
{
  REG32(ETH_REG_BASE + ETH_INT_MASK) = 0;
}
 
void eth_halt(void)
{
  /* Disable receiver and transmiter */
  REG32(ETH_REG_BASE + ETH_MODER) &= ~(ETH_MODER_RXEN | ETH_MODER_TXEN);
}
 
 
void eth_toggle_traffic_mon(void)
{
  if (!eth_monitor_enabled)
    {
      printf("eth_toggle_traffic_mon: traffic monitor ENABLED\n");
      printf("eth_toggle_traffic_mon: Warning - do not enable during tftp boot!\n");
      eth_monitor_enabled = 1;
      eth_int_enable();
    }
  else
    {
      eth_int_disable();
      eth_monitor_enabled = 0;
      printf("eth_toggle_traffic_mon: traffic monitor DISABLED\n");
 
 
    }
 
}
#endif

Line No.	Rev	Author	Line
1	2	marcus.erl	`#include "board.h"`
2			`#if OC_LAN==1`
3
4			`#include "common.h"`
5			`#include "support.h"`
6			`#include "uart.h"`
7			`#include "eth.h"`
8			`#include "int.h"`
9	246	julius	`#include "spr-defs.h"`
10	2	marcus.erl
11	140	julius	`//#define PRINT_PACKETS`
12			`//#define ETHPHY_10MBPS`
13	405	julius	`//#define ETHPHY_RESET_ON_INIT`
14	140	julius
15	2	marcus.erl	`extern int printf (const char *fmt, ...);`
16			`extern void lolev_ie(void);`
17			`extern void lolev_idis(void);`
18
19			`int tx_next; /* Next buffer to be given to the user */`
20			`int tx_last; /* Next buffer to be checked if packet sent */`
21			`int tx_full;`
22			`int rx_next; /* Next buffer to be checked for new packet and given to the user */`
23			`void (receive)(volatile unsigned char add, int len); /* Pointer to function to be called`
24			`when frame is received */`
25	140	julius	`int eth_monitor_enabled;`
26	2	marcus.erl
27			`static void`
28			`print_packet(unsigned long add, int len)`
29			`{`
30	405	julius	`int truncate = (len > 256);`
31			`int length_to_print = truncate ? 256 : len;`
32
33	2	marcus.erl	`int i;`
34	405	julius	`printf("\nipacket: add = %lx len = %d\n", add, len);`
35			`for(i = 0; i < length_to_print; i++) {`
36			`if(!(i % 8))`
37			`printf(" ");`
38			`if(!(i % 16))`
39			`printf("\n");`
40			`printf(" %.2x", (((unsigned char )add) + i));`
41
42			`}`
43			`printf("\n");`
44
45			`if (truncate)`
46			`printf("\ttruncated....\n");`
47			`/*`
48			`int i;`
49	2	marcus.erl	`printf("ipacket: add = %lx len = %d\n", add, len);`
50			`for(i = 0; i < len; i++) {`
51	140	julius	`if(!(i % 16)) printf("\n");`
52			`else if(!(i % 8)) printf(" "); // space here, so output is like wireshark`
53	2	marcus.erl	`printf(" %.2x", (((unsigned char )add) + i));`
54			`}`
55			`printf("\n");`
56	405	julius	`*/`
57	2	marcus.erl	`}`
58
59			`void init_tx_bd_pool(void)`
60			`{`
61			`eth_bd *bd;`
62			`int i;`
63	464	julius	`unsigned long eth_data_base = ETH_DATA_BASE;`
64
65	2	marcus.erl	`bd = (eth_bd *)ETH_BD_BASE;`
66
67			`for(i = 0; i < ETH_TXBD_NUM; i++) {`
68			`/* Set Tx BD status */`
69			`bd[i].len_status = 0 << 16 \| ETH_TX_BD_PAD \| ETH_TX_BD_CRC \| ETH_RX_BD_IRQ;`
70
71			`/* Initialize Tx buffer pointer */`
72	464	julius	`bd[i].addr = eth_data_base + (i * ETH_MAXBUF_LEN);`
73	2	marcus.erl	`}`
74
75			`bd[i-1].len_status \|= ETH_TX_BD_WRAP; // Last Tx BD - Wrap`
76			`}`
77
78			`void init_rx_bd_pool(void)`
79			`{`
80			`eth_bd *bd;`
81			`int i;`
82	464	julius	`/* Set ethernet data buffers just above that of stack */`
83			`unsigned long eth_data_base = ETH_DATA_BASE;`
84	2	marcus.erl
85			`bd = (eth_bd *)ETH_BD_BASE + ETH_TXBD_NUM;`
86
87			`for(i = 0; i < ETH_RXBD_NUM; i++){`
88
89			`/* Set Rx BD status */`
90			`bd[i].len_status = 0 << 16 \| ETH_RX_BD_EMPTY \| ETH_RX_BD_IRQ;`
91
92			`/* Initialize Rx buffer pointer */`
93	464	julius	`bd[i].addr = eth_data_base + ((ETH_TXBD_NUM + i) * ETH_MAXBUF_LEN);`
94	2	marcus.erl	`}`
95
96			`bd[i-1].len_status \|= ETH_RX_BD_WRAP; // Last Rx BD - Wrap`
97			`}`
98
99	140	julius
100			`void eth_traffic_monitor(void)`
101			`{`
102			`volatile oeth_regs *regs;`
103			`regs = (oeth_regs *)(ETH_REG_BASE);`
104
105			`uint int_events;`
106			`int serviced;`
107			`int i;`
108
109			`serviced = 0;`
110
111			`/* Get the interrupt events that caused us to be here.`
112			`*/`
113			`int_events = regs->int_src;`
114			`regs->int_src = int_events;`
115
116			`printf("\n=tx_ \| %x \| %x \| %x \| %x \| %x \| %x \| %x \| %x\n",`
117			`((oeth_bd *)(ETH_BD_BASE))->len_status,`
118			`((oeth_bd *)(ETH_BD_BASE+8))->len_status,`
119			`((oeth_bd *)(ETH_BD_BASE+16))->len_status,`
120			`((oeth_bd *)(ETH_BD_BASE+24))->len_status,`
121			`((oeth_bd *)(ETH_BD_BASE+32))->len_status,`
122			`((oeth_bd *)(ETH_BD_BASE+40))->len_status,`
123			`((oeth_bd *)(ETH_BD_BASE+48))->len_status,`
124			`((oeth_bd *)(ETH_BD_BASE+56))->len_status);`
125
126			`printf("=rx_ \| %x \| %x \| %x \| %x \| %x \| %x \| %x \| %x\n",`
127			`((oeth_bd *)(ETH_BD_BASE+64))->len_status,`
128			`((oeth_bd *)(ETH_BD_BASE+64+8))->len_status,`
129			`((oeth_bd *)(ETH_BD_BASE+64+16))->len_status,`
130			`((oeth_bd *)(ETH_BD_BASE+64+24))->len_status,`
131			`((oeth_bd *)(ETH_BD_BASE+64+32))->len_status,`
132			`((oeth_bd *)(ETH_BD_BASE+64+40))->len_status,`
133			`((oeth_bd *)(ETH_BD_BASE+64+48))->len_status,`
134			`((oeth_bd *)(ETH_BD_BASE+64+56))->len_status);`
135
136			`printf("=int \| txb %d \| txe %d \| rxb %d \| rxe %d \| busy %d\n",`
137			`(int_events & ETH_INT_TXB) > 0,`
138			`(int_events & ETH_INT_TXE) > 0,`
139			`(int_events & ETH_INT_RXF) > 0,`
140			`(int_events & ETH_INT_RXE) > 0,`
141			`(int_events & ETH_INT_BUSY) > 0);`
142
143
144			`/* Check for receive busy, i.e. packets coming but no place to`
145			`* put them.`
146			`*/`
147			`if (int_events & ETH_INT_BUSY ) {`
148			`serviced \|= 0x4;`
149			`printf("eth: busy!");`
150			`}`
151
152			`/* Handle receive event`
153			`*/`
154			`if (int_events & (ETH_INT_RXF \| ETH_INT_RXE)) {`
155			`serviced \|= 0x1;`
156			`volatile oeth_bd *rx_bdp;`
157			`rx_bdp = ((oeth_bd *)ETH_BD_BASE) + ETH_TXBD_NUM;`
158			`/* Find RX buffers marked as having received data */`
159			`for(i = 0; i < ETH_RXBD_NUM; i++)`
160			`{`
161			`if(!(rx_bdp[i].len_status & ETH_RX_BD_EMPTY))`
162			`{`
163			`print_packet(rx_bdp[i].addr, rx_bdp[i].len_status >> 16);`
164			`rx_bdp[i].len_status &= ~ETH_RX_BD_STATS; /* Clear stats */`
165			`rx_bdp[i].len_status \|= ETH_RX_BD_EMPTY; /* Mark RX BD as empty */`
166			`}`
167			`}`
168			`}`
169
170			`/* Handle transmit event`
171			`*/`
172			`if (int_events & (ETH_INT_TXB \| ETH_INT_TXE)) {`
173			`serviced \|= 0x2;`
174			`volatile oeth_bd *tx_bd;`
175			`tx_bd = (volatile oeth_bd )ETH_BD_BASE; / Search from beginning*/`
176			`for(i = 0; i < ETH_TXBD_NUM; i++)`
177			`{`
178			`/* Looking for buffer NOT ready for transmit */`
179			`if((!(tx_bd[i].len_status & (ETH_TX_BD_READY))) &&`
180			`(tx_bd[i].len_status & (ETH_TX_BD_IRQ)))`
181			`{`
182			`print_packet(tx_bd[i].addr, (tx_bd[i].len_status >> 16));`
183			`tx_bd[i].len_status &= ~ETH_TX_BD_IRQ;`
184			`}`
185			`}`
186
187			`}`
188
189			`if (serviced == 0)`
190			`printf("\neth interrupt called but nothing serviced\n");`
191
192			`}`
193
194
195	2	marcus.erl	`/* Ethernet interrupt handler */`
196			`void eth_int (void)`
197			`{`
198	140	julius	`printf("eth-int!\n");`
199			`if (eth_monitor_enabled)`
200			`eth_traffic_monitor();`
201			`//REG32(ETH_REG_BASE + ETH_INT) = 0xffffffff;`
202
203	2	marcus.erl	`}`
204
205	140	julius	`void eth_reset_phy(void)`
206			`{`
207			`/* Reset Eth PHY via MDIO*/`
208			`printf("Resetting PHY, waiting for link");`
209			`REG32(ETH_REG_BASE + ETH_MIIADDRESS) = (0<<8)\|(ETH_MDIOPHYADDR&0xff);`
210			`REG32(ETH_REG_BASE + ETH_MIITX_DATA) = 0x8000; // Bit 15 = 1: RESET`
211			`REG32(ETH_REG_BASE + ETH_MIICOMMAND) = ETH_MIICOMMAND_WCTRLDATA;`
212			`while(REG32(ETH_REG_BASE + ETH_MIISTATUS) & ETH_MIISTATUS_BUSY);`
213
214			`sleep(100);`
215
216			`while(1){`
217			`printf(".");`
218			`REG32(ETH_REG_BASE + ETH_MIIADDRESS) = (0<<8)\|(ETH_MDIOPHYADDR&0xff);`
219			`REG32(ETH_REG_BASE + ETH_MIICOMMAND) = ETH_MIICOMMAND_RSTAT;`
220			`while(REG32(ETH_REG_BASE + ETH_MIISTATUS) & ETH_MIISTATUS_BUSY);`
221			`if(!(REG32(ETH_REG_BASE + ETH_MIIRX_DATA) & 0x8000)) // If reset clear`
222			`break;`
223			`}`
224			`}`
225
226
227	2	marcus.erl	`void eth_init (void (rec)(volatile unsigned char , int))`
228			`{`
229			`/* Reset ethernet core */`
230			`REG32(ETH_REG_BASE + ETH_MODER) = ETH_MODER_RST; /* Reset ON */`
231			`REG32(ETH_REG_BASE + ETH_MODER) &= ~ETH_MODER_RST; /* Reset OFF */`
232
233	405	julius	`#ifdef ETHPHY_RESET_ON_INIT`
234			`REG32(ETH_REG_BASE + ETH_MIIADDRESS) = 0<<8; // BMCR reg`
235			`REG32(ETH_REG_BASE + ETH_MIITX_DATA) = 0x8000; // RESET bit`
236			`REG32(ETH_REG_BASE + ETH_MIICOMMAND) = ETH_MIICOMMAND_WCTRLDATA;`
237			`while(REG32(ETH_REG_BASE + ETH_MIISTATUS) & ETH_MIISTATUS_BUSY);`
238
239			`while(1){`
240			`REG32(ETH_REG_BASE + ETH_MIIADDRESS) = 1<<8;`
241			`REG32(ETH_REG_BASE + ETH_MIICOMMAND) = ETH_MIICOMMAND_RSTAT;`
242			`while(REG32(ETH_REG_BASE + ETH_MIISTATUS) & ETH_MIISTATUS_BUSY);`
243			`if(REG32(ETH_REG_BASE + ETH_MIIRX_DATA) & 0x04)`
244			`break;`
245			`}`
246			`#endif`
247	140	julius
248			`#ifdef ETHPHY_10MBPS`
249	2	marcus.erl	`// Set PHY to 10 Mbps full duplex`
250			`REG32(ETH_REG_BASE + ETH_MIIADDRESS) = 0<<8;`
251			`REG32(ETH_REG_BASE + ETH_MIITX_DATA) = 0x0100;`
252			`REG32(ETH_REG_BASE + ETH_MIICOMMAND) = ETH_MIICOMMAND_WCTRLDATA;`
253			`while(REG32(ETH_REG_BASE + ETH_MIISTATUS) & ETH_MIISTATUS_BUSY);`
254
255			`while(1){`
256			`REG32(ETH_REG_BASE + ETH_MIIADDRESS) = 1<<8;`
257			`REG32(ETH_REG_BASE + ETH_MIICOMMAND) = ETH_MIICOMMAND_RSTAT;`
258			`while(REG32(ETH_REG_BASE + ETH_MIISTATUS) & ETH_MIISTATUS_BUSY);`
259			`if(REG32(ETH_REG_BASE + ETH_MIIRX_DATA) & 0x04)`
260			`break;`
261			`}`
262	140	julius
263			`#endif`
264	2	marcus.erl
265	405	julius
266			`/* Setting TX BD number */`
267			`REG32(ETH_REG_BASE + ETH_TX_BD_NUM) = ETH_TXBD_NUM;`
268
269	2	marcus.erl	`/* Set min/max packet length */`
270			`REG32(ETH_REG_BASE + ETH_PACKETLEN) = 0x00400600;`
271
272			`/* Set IPGT register to recomended value */`
273			`REG32(ETH_REG_BASE + ETH_IPGT) = 0x00000012;`
274
275			`/* Set IPGR1 register to recomended value */`
276			`REG32(ETH_REG_BASE + ETH_IPGR1) = 0x0000000c;`
277
278			`/* Set IPGR2 register to recomended value */`
279			`REG32(ETH_REG_BASE + ETH_IPGR2) = 0x00000012;`
280
281			`/* Set COLLCONF register to recomended value */`
282			`REG32(ETH_REG_BASE + ETH_COLLCONF) = 0x000f003f;`
283
284			`#if 0`
285	140	julius	`REG32(ETH_REG_BASE + ETH_CTRLMODER) = ETH_CTRLMODER_TXFLOW \| ETH_CTRLMODER_RXFLOW;`
286	2	marcus.erl	`#else`
287			`REG32(ETH_REG_BASE + ETH_CTRLMODER) = 0;`
288			`#endif`
289
290			`/* Initialize RX and TX buffer descriptors */`
291			`init_rx_bd_pool();`
292			`init_tx_bd_pool();`
293
294			`/* Initialize tx pointers */`
295			`tx_next = 0;`
296			`tx_last = 0;`
297			`tx_full = 0;`
298
299			`/* Initialize rx pointers */`
300			`rx_next = 0;`
301	405	julius
302			`/* Assign receive function pointer to what we were passed */`
303	2	marcus.erl	`receive = rec;`
304
305			`/* Set local MAC address */`
306			`REG32(ETH_REG_BASE + ETH_MAC_ADDR1) = ETH_MACADDR0 << 8 \|`
307			`ETH_MACADDR1;`
308			`REG32(ETH_REG_BASE + ETH_MAC_ADDR0) = ETH_MACADDR2 << 24 \|`
309			`ETH_MACADDR3 << 16 \|`
310			`ETH_MACADDR4 << 8 \|`
311			`ETH_MACADDR5;`
312
313			`/* Clear all pending interrupts */`
314			`REG32(ETH_REG_BASE + ETH_INT) = 0xffffffff;`
315
316	405	julius	`/* Register interrupt handler */`
317			`int_add (ETH_IRQ, eth_int);`
318
319	2	marcus.erl	`/* Promisc, IFG, CRCEn */`
320			`REG32(ETH_REG_BASE + ETH_MODER) \|= ETH_MODER_PAD \| ETH_MODER_IFG \| ETH_MODER_CRCEN;`
321
322			`/* Enable interrupt sources */`
323			`#if 0`
324	140	julius	`REG32(ETH_REG_BASE + ETH_INT_MASK)= ETH_INT_MASK_TXB \|`
325	2	marcus.erl	`ETH_INT_MASK_TXE \|`
326			`ETH_INT_MASK_RXF \|`
327			`ETH_INT_MASK_RXE \|`
328			`ETH_INT_MASK_BUSY \|`
329			`ETH_INT_MASK_TXC \|`
330			`ETH_INT_MASK_RXC;`
331	140	julius	`eth_monitor_enabled = 1;`
332	2	marcus.erl	`#else`
333			`REG32(ETH_REG_BASE + ETH_INT_MASK) = 0x00000000;`
334	140	julius	`printf("eth_init: monitor disabled at startup\n");`
335			`eth_monitor_enabled = 0;`
336	2	marcus.erl	`#endif`
337
338			`/* Enable receiver and transmiter */`
339			`REG32(ETH_REG_BASE + ETH_MODER) \|= ETH_MODER_RXEN \| ETH_MODER_TXEN;`
340
341			`}`
342
343			`/* Returns pointer to next free buffer; NULL if none available */`
344			`void *eth_get_tx_buf ()`
345			`{`
346			`eth_bd *bd;`
347			`unsigned long add;`
348
349			`if(tx_full)`
350			`return (void *)0;`
351
352			`bd = (eth_bd *)ETH_BD_BASE;`
353
354			`if(bd[tx_next].len_status & ETH_TX_BD_READY)`
355			`return (void *)0;`
356
357			`add = bd[tx_next].addr;`
358
359	405	julius	`tx_next++;`
360	2	marcus.erl
361	405	julius	`if (tx_next == ETH_TXBD_NUM)`
362			`tx_next = 0;`
363	2	marcus.erl
364	405	julius	`// Disabled for now - highly unlikely we'll ever run out of TX buffer spots`
365			`//if(tx_next == tx_last)`
366			`//tx_full = 1;`
367
368	2	marcus.erl	`return (void *)add;`
369			`}`
370
371			`/* Send a packet at address */`
372			`void eth_send (void *buf, unsigned long len)`
373			`{`
374	140	julius	`eth_bd *bd;`
375	246	julius	`int i;`
376	2	marcus.erl
377	140	julius	`#ifdef PRINT_PACKETS`
378	405	julius	`printf("transmitted packet txbd %d:\t", tx_last);`
379	140	julius	`print_packet(buf, len);`
380			`#endif`
381
382	2	marcus.erl	`bd = (eth_bd *)ETH_BD_BASE;`
383
384			`bd[tx_last].addr = (unsigned long)buf;`
385	246	julius
386	140	julius	`retry_eth_send:`
387	2	marcus.erl	`bd[tx_last].len_status &= 0x0000ffff & ~ETH_TX_BD_STATS;`
388	406	julius
389	140	julius	`if (eth_monitor_enabled) // enable IRQ when sending`
390			`bd[tx_last].len_status \|= ETH_TX_BD_IRQ;`
391	406	julius
392	2	marcus.erl	`bd[tx_last].len_status \|= len << 16 \| ETH_TX_BD_READY;`
393
394	406	julius	`if (!eth_monitor_enabled) // If we're not running the network sniffer...`
395	140	julius	`{`
396	406	julius	`while (bd[tx_last].len_status & ETH_TX_BD_READY);`
397
398			`//printf("packet tx\n");`
399			`// Check it was sent OK`
400			`/*`
401			`BUG with current implementation - constantly getting carrier sense`
402			`lost, and deferred indication, so ignore it for now.`
403			`if ( bd[tx_last].len_status & 0xf)`
404			`{`
405			`printf("eth_send: carrier sense lost (txbd: 0x%x), deferred, retrying\n",`
406			`bd[tx_last].len_status);`
407			`sleep(1);`
408			`goto retry_eth_send;`
409			`}`
410			`*/`
411	140	julius	`}`
412	406	julius
413	405	julius	`tx_last++;`
414
415			`if (tx_last == ETH_TXBD_NUM)`
416			`tx_last = 0;`
417
418	2	marcus.erl	`tx_full = 0;`
419	140	julius
420	2	marcus.erl	`}`
421
422			`/* Waits for packet and pass it to the upper layers */`
423	405	julius	`unsigned long`
424			`eth_rx (void)`
425	2	marcus.erl	`{`
426			`eth_bd *bd;`
427			`unsigned long len = 0;`
428	246	julius	`int i;`
429	2	marcus.erl
430			`bd = (eth_bd *)ETH_BD_BASE + ETH_TXBD_NUM;`
431	140	julius
432	2	marcus.erl	`while(1) {`
433
434			`int bad = 0;`
435
436			`if(bd[rx_next].len_status & ETH_RX_BD_EMPTY)`
437			`return len;`
438	246	julius
439	2	marcus.erl	`if(bd[rx_next].len_status & ETH_RX_BD_OVERRUN) {`
440			`printf("eth rx: ETH_RX_BD_OVERRUN\n");`
441			`bad = 1;`
442			`}`
443			`if(bd[rx_next].len_status & ETH_RX_BD_INVSIMB) {`
444			`printf("eth rx: ETH_RX_BD_INVSIMB\n");`
445			`bad = 1;`
446			`}`
447			`if(bd[rx_next].len_status & ETH_RX_BD_DRIBBLE) {`
448			`printf("eth rx: ETH_RX_BD_DRIBBLE\n");`
449			`bad = 1;`
450			`}`
451			`if(bd[rx_next].len_status & ETH_RX_BD_TOOLONG) {`
452			`printf("eth rx: ETH_RX_BD_TOOLONG\n");`
453			`bad = 1;`
454			`}`
455			`if(bd[rx_next].len_status & ETH_RX_BD_SHORT) {`
456			`printf("eth rx: ETH_RX_BD_SHORT\n");`
457			`bad = 1;`
458			`}`
459			`if(bd[rx_next].len_status & ETH_RX_BD_CRCERR) {`
460			`printf("eth rx: ETH_RX_BD_CRCERR\n");`
461			`bad = 1;`
462			`}`
463			`if(bd[rx_next].len_status & ETH_RX_BD_LATECOL) {`
464			`printf("eth rx: ETH_RX_BD_LATECOL\n");`
465			`bad = 1;`
466			`}`
467
468			`if(!bad) {`
469	140	julius	`#ifdef PRINT_PACKETS`
470	405	julius	`printf("received packet: rxbd %d\t",rx_next);`
471	140	julius	`print_packet(bd[rx_next].addr, bd[rx_next].len_status >> 16);`
472			`#endif`
473	246	julius
474	2	marcus.erl	`receive((void *)bd[rx_next].addr, bd[rx_next].len_status >> 16);`
475			`len += bd[rx_next].len_status >> 16;`
476			`}`
477
478			`bd[rx_next].len_status &= ~ETH_RX_BD_STATS;`
479			`bd[rx_next].len_status \|= ETH_RX_BD_EMPTY;`
480
481	405	julius	`rx_next++;`
482
483			`if (rx_next == ETH_RXBD_NUM)`
484			`rx_next = 0;`
485	2	marcus.erl	`}`
486			`}`
487
488			`void eth_int_enable(void)`
489			`{`
490			`REG32(ETH_REG_BASE + ETH_INT_MASK) = ETH_INT_MASK_TXB \|`
491			`ETH_INT_MASK_TXE \|`
492			`ETH_INT_MASK_RXF \|`
493			`ETH_INT_MASK_RXE \|`
494			`ETH_INT_MASK_BUSY \|`
495			`ETH_INT_MASK_TXC \|`
496			`ETH_INT_MASK_RXC;`
497			`}`
498
499	140	julius	`void eth_int_disable(void)`
500			`{`

Browse

Tools

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [bootloaders/] [orpmon/] [drivers/] [eth.c] - Blame information for rev 481