URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [bootloaders/] [orpmon/] [include/] [board.h] - Blame information for rev 2

Go to most recent revision | Details | Compare with Previous | View Log


#ifndef _BOARD_H_
#define _BOARD_H_
 
#define CFG_IN_FLASH            1
#define MC_ENABLED              1
 
//LAN controller 
//#define SMC91111_LAN          1
#define OC_LAN                  1
 
/* BOARD
 * 0 - bender
 * 1 - marvin
 */
#define BOARD                   1
 
#if BOARD==0
// Nibbler on bender1
 
#  define IC_ENABLE             1
#  define IC_SIZE               4096
#  define DC_ENABLE             1
#  define DC_SIZE               2048
#  define FLASH_BASE_ADDR         0xf0000000
#  define FLASH_SIZE              0x02000000
#  define FLASH_BLOCK_SIZE        0x00020000
#  define START_ADD               0x0
#  define CONFIG_OR32_MC_VERSION  2
#  define IN_CLK                  25000000
#  define BOARD_DEF_NAME          "bender"
// Flash Organization on board
// FLASH_ORG_XX_Y
// where XX - flash bit size
//       Y  - number of parallel devices connected
#  define FLASH_ORG_16_1          1
#elif BOARD==1
//Marvin
 
#  define IC_ENABLE             0
#  define IC_SIZE               8192
#  define DC_ENABLE             0
#  define DC_SIZE               8192
#  define FLASH_BASE_ADDR         0xf0000000
#  define FLASH_SIZE              0x04000000
#  define FLASH_BLOCK_SIZE        0x00040000
#  define START_ADD               0x0
#  define CONFIG_OR32_MC_VERSION  1
/*#  define IN_CLK                100000000*/
#  define IN_CLK                  50000000
#  define FLASH_ORG_16_2          1
#  define BOARD_DEF_NAME          "marvin"
#else
 
//Custom Board
#  define IC_ENABLE             0
#  define IC_SIZE               8192
#  define DC_ENABLE             0
#  define DC_SIZE               8192
#  define FLASH_BASE_ADDR         0xf0000000
#  define FLASH_SIZE              0x04000000
#  define FLASH_BLOCK_SIZE        0x00040000
#  define START_ADD               0x0
#  define CONFIG_OR32_MC_VERSION  1
#  define IN_CLK                  25000000
#  define FLASH_ORG_16_2          1
#  define BOARD_DEF_NAME          "custom"
 
#endif
 
#define UART_BAUD_RATE          115200
 
#define TICKS_PER_SEC           100
 
#define STACK_SIZE              0x10000
 
#if     CONFIG_OR32_MC_VERSION==1
// Marvin, Bender MC
#  include "mc-init-1.h"
#elif   CONFIG_OR32_MC_VERSION==2
// Highland MC
#  include "mc-init-2.h"
#else
#  error "no memory controler chosen"
#endif
 
#define UART_BASE               0x90000000
#define UART_IRQ                2
#define ETH_BASE                0x92000000
#define ETH_IRQ                 4
#define MC_BASE_ADDR            0x93000000
#define SPI_BASE                0xb9000000
#define CRT_BASE_ADDR           0x97000000
#define ATA_BASE_ADDR           0x9e000000
#define KBD_BASE_ADD            0x94000000
#define KBD_IRQ                 5
 
#define SANCHO_BASE_ADD         0x98000000
#define ETH_DATA_BASE           0xa8000000 /*  Address for ETH_DATA */
 
#if 1
#define BOARD_DEF_IP            0x0100002a /* 1.0.0.42 */
#define BOARD_DEF_MASK          0xffffff00 /* 255.255.255.0 */
#define BOARD_DEF_GW            0x01000001 /* 1.0.0.1 */
#define BOARD_DEF_TBOOT_SRVR    "1.0.0.66"
#else
#define BOARD_DEF_IP            0x0aed012a /* 10.237.1.42 */
#define BOARD_DEF_MASK          0xffffff00 /* 255.255.255.0 */
#define BOARD_DEF_GW            0x0aed0101 /* 10.0.0.1 */
#define BOARD_DEF_TBOOT_SRVR    "10.237.1.27"
#endif
 
 
#define ETH_MACADDR0            0x00
#define ETH_MACADDR1            0x12
#define ETH_MACADDR2            0x34
#define ETH_MACADDR3            0x56
#define ETH_MACADDR4            0x78
#define ETH_MACADDR5            0x9a
 
#define CRT_ENABLED             1
#define FB_BASE_ADDR            0xa8000000
 
/* Whether online help is available -- saves space */
#define HELP_ENABLED            1
 
/* Whether self check is enabled */
#define SELF_CHECK              0
 
/* Whether we have keyboard suppport */
#define KBD_ENABLED             1
 
/* Keyboard buffer size */
#define KBDBUF_SIZE             256
 
/* Which console is used (CT_NONE, CT_SIM, CT_UART, CT_CRT) */
#define CONSOLE_TYPE            CT_UART
 
#endif

Line No.	Rev	Author	Line
1	2	marcus.erl	`#ifndef _BOARD_H_`
2			`#define _BOARD_H_`
3
4			`#define CFG_IN_FLASH 1`
5			`#define MC_ENABLED 1`
6
7			`//LAN controller`
8			`//#define SMC91111_LAN 1`
9			`#define OC_LAN 1`
10
11			`/* BOARD`
12			`* 0 - bender`
13			`* 1 - marvin`
14			`*/`
15			`#define BOARD 1`
16
17			`#if BOARD==0`
18			`// Nibbler on bender1`
19
20			`# define IC_ENABLE 1`
21			`# define IC_SIZE 4096`
22			`# define DC_ENABLE 1`
23			`# define DC_SIZE 2048`
24			`# define FLASH_BASE_ADDR 0xf0000000`
25			`# define FLASH_SIZE 0x02000000`
26			`# define FLASH_BLOCK_SIZE 0x00020000`
27			`# define START_ADD 0x0`
28			`# define CONFIG_OR32_MC_VERSION 2`
29			`# define IN_CLK 25000000`
30			`# define BOARD_DEF_NAME "bender"`
31			`// Flash Organization on board`
32			`// FLASH_ORG_XX_Y`
33			`// where XX - flash bit size`
34			`// Y - number of parallel devices connected`
35			`# define FLASH_ORG_16_1 1`
36			`#elif BOARD==1`
37			`//Marvin`
38
39			`# define IC_ENABLE 0`
40			`# define IC_SIZE 8192`
41			`# define DC_ENABLE 0`
42			`# define DC_SIZE 8192`
43			`# define FLASH_BASE_ADDR 0xf0000000`
44			`# define FLASH_SIZE 0x04000000`
45			`# define FLASH_BLOCK_SIZE 0x00040000`
46			`# define START_ADD 0x0`
47			`# define CONFIG_OR32_MC_VERSION 1`
48			`/# define IN_CLK 100000000/`
49			`# define IN_CLK 50000000`
50			`# define FLASH_ORG_16_2 1`
51			`# define BOARD_DEF_NAME "marvin"`
52			`#else`
53
54			`//Custom Board`
55			`# define IC_ENABLE 0`
56			`# define IC_SIZE 8192`
57			`# define DC_ENABLE 0`
58			`# define DC_SIZE 8192`
59			`# define FLASH_BASE_ADDR 0xf0000000`
60			`# define FLASH_SIZE 0x04000000`
61			`# define FLASH_BLOCK_SIZE 0x00040000`
62			`# define START_ADD 0x0`
63			`# define CONFIG_OR32_MC_VERSION 1`
64			`# define IN_CLK 25000000`
65			`# define FLASH_ORG_16_2 1`
66			`# define BOARD_DEF_NAME "custom"`
67
68			`#endif`
69
70			`#define UART_BAUD_RATE 115200`
71
72			`#define TICKS_PER_SEC 100`
73
74			`#define STACK_SIZE 0x10000`
75
76			`#if CONFIG_OR32_MC_VERSION==1`
77			`// Marvin, Bender MC`
78			`# include "mc-init-1.h"`
79			`#elif CONFIG_OR32_MC_VERSION==2`
80			`// Highland MC`
81			`# include "mc-init-2.h"`
82			`#else`
83			`# error "no memory controler chosen"`
84			`#endif`
85
86			`#define UART_BASE 0x90000000`
87			`#define UART_IRQ 2`
88			`#define ETH_BASE 0x92000000`
89			`#define ETH_IRQ 4`
90			`#define MC_BASE_ADDR 0x93000000`
91			`#define SPI_BASE 0xb9000000`
92			`#define CRT_BASE_ADDR 0x97000000`
93			`#define ATA_BASE_ADDR 0x9e000000`
94			`#define KBD_BASE_ADD 0x94000000`
95			`#define KBD_IRQ 5`
96
97			`#define SANCHO_BASE_ADD 0x98000000`
98			`#define ETH_DATA_BASE 0xa8000000 /* Address for ETH_DATA */`
99
100			`#if 1`
101			`#define BOARD_DEF_IP 0x0100002a /* 1.0.0.42 */`
102			`#define BOARD_DEF_MASK 0xffffff00 /* 255.255.255.0 */`
103			`#define BOARD_DEF_GW 0x01000001 /* 1.0.0.1 */`
104			`#define BOARD_DEF_TBOOT_SRVR "1.0.0.66"`
105			`#else`
106			`#define BOARD_DEF_IP 0x0aed012a /* 10.237.1.42 */`
107			`#define BOARD_DEF_MASK 0xffffff00 /* 255.255.255.0 */`
108			`#define BOARD_DEF_GW 0x0aed0101 /* 10.0.0.1 */`
109			`#define BOARD_DEF_TBOOT_SRVR "10.237.1.27"`
110			`#endif`
111
112
113			`#define ETH_MACADDR0 0x00`
114			`#define ETH_MACADDR1 0x12`
115			`#define ETH_MACADDR2 0x34`
116			`#define ETH_MACADDR3 0x56`
117			`#define ETH_MACADDR4 0x78`
118			`#define ETH_MACADDR5 0x9a`
119
120			`#define CRT_ENABLED 1`
121			`#define FB_BASE_ADDR 0xa8000000`
122
123			`/* Whether online help is available -- saves space */`
124			`#define HELP_ENABLED 1`
125
126			`/* Whether self check is enabled */`
127			`#define SELF_CHECK 0`
128
129			`/* Whether we have keyboard suppport */`
130			`#define KBD_ENABLED 1`
131
132			`/* Keyboard buffer size */`
133			`#define KBDBUF_SIZE 256`
134
135			`/* Which console is used (CT_NONE, CT_SIM, CT_UART, CT_CRT) */`
136			`#define CONSOLE_TYPE CT_UART`
137
138			`#endif`

Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [bootloaders/] [orpmon/] [include/] [board.h] - Blame information for rev 2