Subversion Repositories openrisc

#ifndef _BOARD_H_

#define _BOARD_H_

#define CFG_IN_FLASH            0

//#define MC_ENABLED            1

//LAN controller 

//#define SMC91111_LAN          1

#define OC_LAN                  1

/* BOARD

 * 0 - bender

 * 1 - marvin

 * 2 - ORSoC A3PE1500 board

 * 3 - ORSoC A3P1000 board

 * 4 - ML501

 */

#define BOARD                   2

/* Ethernet IP and TFTP config

 * 0 - JB ORSoC board

 * 1 - AE ORSoC board

 * 2 - JB Southpole board

 * 3 - JB ORSoC board 2

 * 4 - Unassigned

 */

#define IPCONFIG                 3

#if BOARD==0

// Nibbler on bender1

#  define FLASH_BASE_ADDR         0xf0000000

#  define FLASH_SIZE              0x02000000

#  define FLASH_BLOCK_SIZE        0x00020000

#  define START_ADD               0x0

#  define CONFIG_OR32_MC_VERSION  2

#  define IN_CLK                  25000000

#  define BOARD_DEF_NAME          "bender"

// Flash Organization on board

// FLASH_ORG_XX_Y

// where XX - flash bit size

//       Y  - number of parallel devices connected

#  define FLASH_ORG_16_1          1

#elif BOARD==1

//Marvin

#  define FLASH_BASE_ADDR         0xf0000000

#  define FLASH_SIZE              0x04000000

#  define FLASH_BLOCK_SIZE        0x00040000

#  define START_ADD               0x0

#  define CONFIG_OR32_MC_VERSION  1

#  define IN_CLK                  50000000

#  define FLASH_ORG_16_2          1

#  define BOARD_DEF_NAME          "marvin"

#elif BOARD==2

//ORSoC ordb1a3pe1500

#  define FLASH_BASE_ADDR         0xf0000000

#  define FLASH_SIZE              0x04000000

#  define FLASH_BLOCK_SIZE        0x00040000

#  define START_ADD               0x0

#  define SDRAM_SIZE              0x02000000

#  define SDRAM_ROW_SIZE          0x00000400

#  define SDRAM_BANK_SIZE         0x00800000

#  define IN_CLK                  20000000

#  define FLASH_ORG_16_2          1

#  define BOARD_DEF_NAME          "ORSoC devboard"

#elif BOARD==3

//ORSoC ordb1a3p1000

#  define FLASH_BASE_ADDR         0xf0000000

#  define FLASH_SIZE              0x04000000

#  define FLASH_BLOCK_SIZE        0x00040000

#  define START_ADD               0x0

#  define SDRAM_SIZE              0x02000000

#  define SDRAM_ROW_SIZE          0x00000400

#  define SDRAM_BANK_SIZE         0x00800000

#  define IN_CLK                  25000000

#  define FLASH_ORG_16_2          1

#  define BOARD_DEF_NAME          "ORSoC A3P1000 devboard"

#elif BOARD==4

//Xilinx ML501

#  define FLASH_BASE_ADDR         0xf0000000

#  define FLASH_SIZE              0x04000000

#  define FLASH_BLOCK_SIZE        0x00040000

#  define START_ADD               0x0

#  define SDRAM_SIZE              0x10000000

#  define SDRAM_ROW_SIZE          0x00000400

#  define SDRAM_BANK_SIZE         0x00800000

#  define IN_CLK                  50000000

#  define FLASH_ORG_16_2          1

#  define BOARD_DEF_NAME          "Xilinx ML501"

#else

//Custom Board

#  define FLASH_BASE_ADDR         0xf0000000

#  define FLASH_SIZE              0x04000000

#  define FLASH_BLOCK_SIZE        0x00040000

#  define START_ADD               0x0

#  define IN_CLK                  25000000

#  define FLASH_ORG_16_2          1

#  define BOARD_DEF_NAME          "custom"

#endif

// IP tboot configs

#if IPCONFIG==0

#define BOARD_DEF_IP            0xc0a8649b // 192.168.100.155

#define BOARD_DEF_MASK          0xffffff00 // 255.255.255.0

#define BOARD_DEF_GW            0xc0a86401 // 192.168.100.1

#define BOARD_DEF_TBOOT_SRVR    0xc0a86469 //"192.168.100.105"

#define BOARD_DEF_IMAGE_NAME    "boot.img"

#define BOARD_DEF_LOAD_SPACE    0xa00000

#define ETH_MDIOPHYADDR         0x00

#define ETH_MACADDR0            0x00

#define ETH_MACADDR1            0x12

#define ETH_MACADDR2            0x34

#define ETH_MACADDR3            0x56

#define ETH_MACADDR4            0x78

#define ETH_MACADDR5            0x9a

#elif IPCONFIG==1

#define BOARD_DEF_IP            0xc0a8649c // 192.168.100.156

#define BOARD_DEF_MASK          0xffffff00 // 255.255.255.0

#define BOARD_DEF_GW            0xc0a86401 // 192.168.100.1

#define BOARD_DEF_TBOOT_SRVR    0xc0a864e3 //"192.168.100.227"

#define BOARD_DEF_IMAGE_NAME    "boot.img"

#define BOARD_DEF_LOAD_SPACE    0xa00000

#define ETH_MDIOPHYADDR         0x00

#define ETH_MACADDR0            0x00

#define ETH_MACADDR1            0x12

#define ETH_MACADDR2            0x34

#define ETH_MACADDR3            0x56

#define ETH_MACADDR4            0x78

#define ETH_MACADDR5            0x9b

#elif IPCONFIG==2

#define BOARD_DEF_IP            0xac1e0002 // 172.30.0.2

#define BOARD_DEF_MASK          0xffff0000 // 255.255.0.0

#define BOARD_DEF_GW            0xac1e0001 //"172.30.0.1"

#define BOARD_DEF_TBOOT_SRVR    0xac1e0001 //"172.30.0.1"

#define BOARD_DEF_IMAGE_NAME    "boot.img"

#define BOARD_DEF_LOAD_SPACE    0xa00000

#define ETH_MDIOPHYADDR         0x00

#define ETH_MACADDR0            0x00

#define ETH_MACADDR1            0x12

#define ETH_MACADDR2            0x34

#define ETH_MACADDR3            0x56

#define ETH_MACADDR4            0x78

#define ETH_MACADDR5            0x9c

#elif IPCONFIG==3 // JB ORSoC board 2

#define BOARD_DEF_IP            0xc0a8005a // 192.168.0.90

#define BOARD_DEF_MASK          0xffffff00 // 255.255.255.0

#define BOARD_DEF_GW            0xc0a80001 // 192.168.0.1

#define BOARD_DEF_TBOOT_SRVR    0xc0a8000f // 192.168.0.15

#define BOARD_DEF_IMAGE_NAME    "boot.img"

#define BOARD_DEF_LOAD_SPACE    0xa00000

#define ETH_MDIOPHYADDR         0x00

#define ETH_MACADDR0            0x00

#define ETH_MACADDR1            0x12

#define ETH_MACADDR2            0x34

#define ETH_MACADDR3            0x56

#define ETH_MACADDR4            0x78

#define ETH_MACADDR5            0x9d

#elif IPCONFIG==4 // Unassigned config...

#define BOARD_DEF_IP            0x0a01010a // 10.1.1.10

#define BOARD_DEF_MASK          0xffffff00 // 255.255.255.0

#define BOARD_DEF_GW            0x0a010101 // 10.1.1.1

#define BOARD_DEF_TBOOT_SRVR    0x0a010101 // 10.1.1.1

#define BOARD_DEF_IMAGE_NAME    "boot.img"

#define BOARD_DEF_LOAD_SPACE    0xa00000

#define ETH_MDIOPHYADDR         0x00

#define ETH_MACADDR0            0x00

#define ETH_MACADDR1            0x01

#define ETH_MACADDR2            0x34

#define ETH_MACADDR3            0x56

#define ETH_MACADDR4            0x78

#define ETH_MACADDR5            0x9e

#endif

#define UART_BAUD_RATE          115200

#define TICKS_PER_SEC           100

#define MS_PER_SEC 1000

#define US_PER_SEC 1000000

#define US_PER_TICK (US_PER_SEC/TICKS_PER_SEC)

#define TICKS_PER_US (TICKS_PER_SEC*1000000)

#define STACK_SIZE              0x10000

#if     CONFIG_OR32_MC_VERSION==1

// Marvin, Bender MC

#  include "mc-init-1.h"

#elif   CONFIG_OR32_MC_VERSION==2

// Highland MC

#  include "mc-init-2.h"

//#else

//#  error "no memory controler chosen"

#endif

#define UART_BASE               0x90000000

#define UART_IRQ                2

#define ETH_BASE                0x92000000

#define ETH_IRQ                 4

#define SPI_BASE                0xb0000000

#define CRT_BASE_ADDR           0x97000000

#define ATA_BASE_ADDR           0x9e000000

#define KBD_BASE_ADD            0x94000000

#define KBD_IRQ                 5

#define SDC_CONTROLLER_BASE     0x9e000000

#define SANCHO_BASE_ADD         0x98000000

/*  Address for ETH_DATA */

#define ETH_DATA_BASE           (SDRAM_SIZE - (0x600 * 128)) 

#define CRT_ENABLED             0

#define FB_BASE_ADDR            0xa8000000

/* Whether online help is available -- saves space */

#define HELP_ENABLED            1

/* Whether self check is enabled */

#define SELF_CHECK              0

/* Whether we have keyboard suppport */

#define KBD_ENABLED             0

/* Keyboard buffer size */

#define KBDBUF_SIZE             256

/* Which console is used (CT_NONE, CT_SIM, CT_UART, CT_CRT) */

#define CONSOLE_TYPE            CT_UART

#endif