URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [bootloaders/] [orpmon/] [services/] [modem.c] - Blame information for rev 406

Details | Compare with Previous | View Log


#include "common.h"
#include "support.h"
#include "net.h"
#include "uart.h"
#include "spr-defs.h"
#include "flash.h"
 
#define SOH    0x01
#define STX    0x02
#define EOT    0x04
#define ACK    0x06
#define NAK    0x15
#define CAN    0x18
#define C      0x43
 
#define CPMEOF 0x1A
 
#define RETRY   10
#define TIMEOUT 3
 
/* update CRC */
unsigned short updcrc(register int c, register unsigned int crc)
{
        register int count;
 
        for (count = 8; --count >= 0;) {
                if (crc & 0x8000) {
                        crc <<= 1;
                        crc += (((c <<= 1) & 0400) != 0);
                        crc ^= 0x1021;
                } else {
                        crc <<= 1;
                        crc += (((c <<= 1) & 0400) != 0);
                }
        }
        return crc;
}
 
static thand_f *mTimeHandler;
static unsigned long mTimeValue;
static int mTimeoutCount;
 
static unsigned long src_addr;
 
unsigned int length;
unsigned int modemMode = 0, bLen = 128;
unsigned short mycrc;
unsigned long bno = 0;
 
static void mStartTimeout(void);
 
void mSetTimeout(int iv, thand_f * f)
{
        if (iv == 0)
                mTimeHandler = (thand_f *) 0;
        else {
                mTimeHandler = f;
                mTimeValue = get_timer(0) + iv;
        }
}
 
static void mStartTimeout(void)
{
        if (++mTimeoutCount >= RETRY) {
                printf("...retry counter exceeded, quitting...\n");
                return;
        } else {
                printf(".");
                mSetTimeout(TIMEOUT * TICKS_PER_SEC, mStartTimeout);
                uart_putc(C);
 
        }
}
 
static void mReceiveTimeout(void)
{
        if (++mTimeoutCount >= RETRY) {
                uart_putc(NAK);
                printf("...");
                return;
        } else {
                mSetTimeout(TIMEOUT * TICKS_PER_SEC, mReceiveTimeout);
                uart_putc(NAK);
        }
}
 
int getBlock(unsigned char t)
{
        unsigned int i = 0, j = 0;
        unsigned char mybuf[133];
        unsigned char bNo, nBno;
        unsigned long dst_addr;
 
        unsigned char flags;
        flags = UART_LSR_FE | UART_LSR_PE | UART_LSR_OE | UART_LSR_BI;  /*frame,parity,overrun errors */
 
        mycrc = 0;
 
        switch (t) {
        case SOH:
                for (i = 0; i < 132; i++) {
                        if ((REG8(UART_BASE + UART_LSR) & flags) == flags) {
                                uart_putc(CAN);
                        }
                        mybuf[i] = uart_getc();
                }
 
                bNo = mybuf[0];  /* packet id */
                nBno = mybuf[1];        /* neg. packet id */
 
                if ((bNo == 0x00) && (nBno == 0xff) && (bno == 0)) {     /* start block */
                        modemMode = 2;  /* ymodem */
                        uart_putc(ACK);
                        uart_putc(C);
                        return 1;
                } else if ((0xff - bNo) == nBno) {      /* data block */
                        for (i = 2, j = 0; i < 130; i++, j++) {
                                length++;
                                mycrc = updcrc(mybuf[i], mycrc);
                                dst_addr =
                                    src_addr + (bno * 0x8000) +
                                    ((bNo - 1) * 0x80) + j;
                                REG8(dst_addr) = mybuf[i];
                        }
 
                        mycrc = updcrc(mybuf[130], mycrc);
                        mycrc = updcrc(mybuf[131], mycrc);
 
                        if (mycrc == 0) {        /* CRC match! */
                                uart_putc(ACK);
                                for (i = 0; i < 128; i += 4) {
                                        /*      for(j=0; j<4; j++) {
                                           tmp = tmp << 8;
                                           tmp |= mybuf[i+j+2];
                                           }
                                           dst_addr = src_addr+(bno*0x8000)+((bNo-1)*128)+i;
                                           fl_word_program(dst_addr, tmp); */
                                }
                                if (bNo == 0xff)
                                        bno++;
                                return 1;
                        } else {
                                uart_putc(NAK);
                                return -1;
                        }
                } else {        /* packet id didn't match neg packet id! */
                        uart_putc(NAK);
                        return -1;
                }
                return 1;
                break;
        case EOT:
                if (modemMode == 2) {   /* ymodem */
                        uart_putc(NAK);
                        if (uart_getc() == EOT) {
                                uart_putc(ACK);
                                uart_putc(C);
                        } else
                                uart_putc(ACK);
                } else          /* zmodem */
                        uart_putc(ACK);
 
                return 0;
                break;
        default:
                /* Unknown header */
                uart_putc(NAK);
                return -1;
        }
}
 
int mGetData(unsigned long saddr)
{
        int retval = 1;
        unsigned char c;
 
        length = 0;
        src_addr = saddr;
        modemMode = 1;
        bno = 0;
 
        printf("src_addr: 0x%lx\n", src_addr);
        if (fl_init() != 0) {
                printf("Flash init failed!\n");
                return (-1);
        }
#if 0
        printf("Unlocking flash...");
        for (i = 0, c = FLASH_BASE_ADDR; i < (FLASH_SIZE / FLASH_BLOCK_SIZE);
             i++, c += FLASH_BLOCK_SIZE)
                if (fl_unlock_one_block(c))
                        return 1;
        printf("done\n");
 
        printf("Erasing flash...");
        for (i = 0, c = FLASH_BASE_ADDR; i < (FLASH_SIZE / FLASH_BLOCK_SIZE);
             i++, c += FLASH_BLOCK_SIZE)
                if (fl_block_erase(c))
                        return 1;
        printf("done\n");
#endif
        printf("Waiting...");
 
        mTimeoutCount = 0;
        mSetTimeout(TIMEOUT * TICKS_PER_SEC, mStartTimeout);
 
        while (1) {
                if (mTimeHandler && (get_timer(0) > mTimeValue)) {
                        thand_f *x;
                        x = mTimeHandler;
                        mTimeHandler = (thand_f *) 0;
                        (*x) ();
                }
                c = uart_testc();
                if (c != 0)
                        break;
        }
 
        while (retval != 0) {
                retval = getBlock(c);
                if (retval != 0)
                        c = uart_getc();
        }
 
        if (modemMode == 2) {
                c = uart_getc();
                retval = getBlock(c);   /* last 'dummy' block for YModem */
                printf("... protocol: YModem, ");
        } else
                printf("... protocol: ZModem, ");
        return length;
}

Line No.	Rev	Author	Line
1	2	marcus.erl	`#include "common.h"`
2			`#include "support.h"`
3			`#include "net.h"`
4			`#include "uart.h"`
5	246	julius	`#include "spr-defs.h"`
6	2	marcus.erl	`#include "flash.h"`
7
8			`#define SOH 0x01`
9			`#define STX 0x02`
10			`#define EOT 0x04`
11			`#define ACK 0x06`
12			`#define NAK 0x15`
13			`#define CAN 0x18`
14			`#define C 0x43`
15
16			`#define CPMEOF 0x1A`
17
18			`#define RETRY 10`
19			`#define TIMEOUT 3`
20
21			`/* update CRC */`
22	406	julius	`unsigned short updcrc(register int c, register unsigned int crc)`
23	2	marcus.erl	`{`
24	406	julius	`register int count;`
25
26			`for (count = 8; --count >= 0;) {`
27			`if (crc & 0x8000) {`
28			`crc <<= 1;`
29			`crc += (((c <<= 1) & 0400) != 0);`
30			`crc ^= 0x1021;`
31			`} else {`
32			`crc <<= 1;`
33			`crc += (((c <<= 1) & 0400) != 0);`
34			`}`
35			`}`
36			`return crc;`
37	2	marcus.erl	`}`
38
39			`static thand_f *mTimeHandler;`
40			`static unsigned long mTimeValue;`
41			`static int mTimeoutCount;`
42
43			`static unsigned long src_addr;`
44
45			`unsigned int length;`
46			`unsigned int modemMode = 0, bLen = 128;`
47			`unsigned short mycrc;`
48			`unsigned long bno = 0;`
49
50			`static void mStartTimeout(void);`
51
52	406	julius	`void mSetTimeout(int iv, thand_f * f)`
53	2	marcus.erl	`{`
54	406	julius	`if (iv == 0)`
55			`mTimeHandler = (thand_f *) 0;`
56			`else {`
57			`mTimeHandler = f;`
58			`mTimeValue = get_timer(0) + iv;`
59			`}`
60	2	marcus.erl	`}`
61
62	406	julius	`static void mStartTimeout(void)`
63	2	marcus.erl	`{`
64	406	julius	`if (++mTimeoutCount >= RETRY) {`
65			`printf("...retry counter exceeded, quitting...\n");`
66			`return;`
67			`} else {`
68			`printf(".");`
69			`mSetTimeout(TIMEOUT * TICKS_PER_SEC, mStartTimeout);`
70			`uart_putc(C);`
71	2	marcus.erl
72	406	julius	`}`
73	2	marcus.erl	`}`
74
75	406	julius	`static void mReceiveTimeout(void)`
76	2	marcus.erl	`{`
77	406	julius	`if (++mTimeoutCount >= RETRY) {`
78			`uart_putc(NAK);`
79			`printf("...");`
80			`return;`
81			`} else {`
82			`mSetTimeout(TIMEOUT * TICKS_PER_SEC, mReceiveTimeout);`
83			`uart_putc(NAK);`
84			`}`
85	2	marcus.erl	`}`
86
87	406	julius	`int getBlock(unsigned char t)`
88	2	marcus.erl	`{`
89	406	julius	`unsigned int i = 0, j = 0;`
90			`unsigned char mybuf[133];`
91			`unsigned char bNo, nBno;`
92			`unsigned long dst_addr;`
93	2	marcus.erl
94	406	julius	`unsigned char flags;`
95			`flags = UART_LSR_FE \| UART_LSR_PE \| UART_LSR_OE \| UART_LSR_BI; /frame,parity,overrun errors /`
96	2	marcus.erl
97	406	julius	`mycrc = 0;`
98	2	marcus.erl
99	406	julius	`switch (t) {`
100			`case SOH:`
101			`for (i = 0; i < 132; i++) {`
102			`if ((REG8(UART_BASE + UART_LSR) & flags) == flags) {`
103			`uart_putc(CAN);`
104			`}`
105			`mybuf[i] = uart_getc();`
106			`}`
107	2	marcus.erl
108	406	julius	`bNo = mybuf[0]; /* packet id */`
109			`nBno = mybuf[1]; /* neg. packet id */`
110	2	marcus.erl
111	406	julius	`if ((bNo == 0x00) && (nBno == 0xff) && (bno == 0)) { /* start block */`
112			`modemMode = 2; /* ymodem */`
113			`uart_putc(ACK);`
114			`uart_putc(C);`
115			`return 1;`
116			`} else if ((0xff - bNo) == nBno) { /* data block */`
117			`for (i = 2, j = 0; i < 130; i++, j++) {`
118			`length++;`
119			`mycrc = updcrc(mybuf[i], mycrc);`
120			`dst_addr =`
121			`src_addr + (bno * 0x8000) +`
122			`((bNo - 1) * 0x80) + j;`
123			`REG8(dst_addr) = mybuf[i];`
124			`}`
125	2	marcus.erl
126	406	julius	`mycrc = updcrc(mybuf[130], mycrc);`
127			`mycrc = updcrc(mybuf[131], mycrc);`
128	2	marcus.erl
129	406	julius	`if (mycrc == 0) { /* CRC match! */`
130			`uart_putc(ACK);`
131			`for (i = 0; i < 128; i += 4) {`
132			`/* for(j=0; j<4; j++) {`
133			`tmp = tmp << 8;`
134			`tmp \|= mybuf[i+j+2];`
135			`}`
136			`dst_addr = src_addr+(bno0x8000)+((bNo-1)128)+i;`
137			`fl_word_program(dst_addr, tmp); */`
138			`}`
139			`if (bNo == 0xff)`
140			`bno++;`
141			`return 1;`
142			`} else {`
143			`uart_putc(NAK);`
144			`return -1;`
145			`}`
146			`} else { /* packet id didn't match neg packet id! */`
147			`uart_putc(NAK);`
148			`return -1;`
149			`}`
150			`return 1;`
151			`break;`
152			`case EOT:`
153			`if (modemMode == 2) { /* ymodem */`
154			`uart_putc(NAK);`
155			`if (uart_getc() == EOT) {`
156			`uart_putc(ACK);`
157			`uart_putc(C);`
158			`} else`
159			`uart_putc(ACK);`
160			`} else /* zmodem */`
161			`uart_putc(ACK);`
162
163			`return 0;`
164			`break;`
165			`default:`
166			`/* Unknown header */`
167			`uart_putc(NAK);`
168			`return -1;`
169	2	marcus.erl	`}`
170			`}`
171
172	406	julius	`int mGetData(unsigned long saddr)`
173	2	marcus.erl	`{`
174	406	julius	`int retval = 1;`
175			`unsigned char c;`
176	2	marcus.erl
177	406	julius	`length = 0;`
178			`src_addr = saddr;`
179			`modemMode = 1;`
180			`bno = 0;`
181	2	marcus.erl
182	406	julius	`printf("src_addr: 0x%lx\n", src_addr);`
183			`if (fl_init() != 0) {`
184			`printf("Flash init failed!\n");`
185			`return (-1);`
186			`}`
187	2	marcus.erl	`#if 0`
188	406	julius	`printf("Unlocking flash...");`
189			`for (i = 0, c = FLASH_BASE_ADDR; i < (FLASH_SIZE / FLASH_BLOCK_SIZE);`
190			`i++, c += FLASH_BLOCK_SIZE)`
191			`if (fl_unlock_one_block(c))`
192			`return 1;`
193			`printf("done\n");`
194	2	marcus.erl
195	406	julius	`printf("Erasing flash...");`
196			`for (i = 0, c = FLASH_BASE_ADDR; i < (FLASH_SIZE / FLASH_BLOCK_SIZE);`
197			`i++, c += FLASH_BLOCK_SIZE)`
198			`if (fl_block_erase(c))`
199			`return 1;`
200			`printf("done\n");`
201	2	marcus.erl	`#endif`
202	406	julius	`printf("Waiting...");`
203	2	marcus.erl
204	406	julius	`mTimeoutCount = 0;`
205			`mSetTimeout(TIMEOUT * TICKS_PER_SEC, mStartTimeout);`
206	2	marcus.erl
207	406	julius	`while (1) {`
208			`if (mTimeHandler && (get_timer(0) > mTimeValue)) {`
209			`thand_f *x;`
210			`x = mTimeHandler;`
211			`mTimeHandler = (thand_f *) 0;`
212			`(*x) ();`
213			`}`
214			`c = uart_testc();`
215			`if (c != 0)`
216			`break;`
217			`}`
218	2	marcus.erl
219	406	julius	`while (retval != 0) {`
220			`retval = getBlock(c);`
221			`if (retval != 0)`
222			`c = uart_getc();`
223			`}`
224	2	marcus.erl
225	406	julius	`if (modemMode == 2) {`
226			`c = uart_getc();`
227			`retval = getBlock(c); /* last 'dummy' block for YModem */`
228			`printf("... protocol: YModem, ");`
229			`} else`
230			`printf("... protocol: ZModem, ");`
231			`return length;`
232	2	marcus.erl	`}`

Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [bootloaders/] [orpmon/] [services/] [modem.c] - Blame information for rev 406