OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [boehm-gc/] [doc/] [README.darwin] - Blame information for rev 729

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 721 jeremybenn
6.5 update:
2
I disabled incremental GC on Darwin in this version, since I couldn't
3
get gctest to pass when the GC was built as a dynamic library.  Building
4
with -DMPROTECT_VDB (and threads) on the command line should get you
5
back to the old state.                  - HB
6
 
7
./configure --enable-cplusplus results in a "make check" failure, probably
8
because the ::delete override ends up in a separate dl, and Darwin dynamic
9
loader semantics appear to be such that this is not really visible to the
10
main program, unlike on ELF systems.  Someone who understands dynamic
11
loading needs to lookat this.  For now, gc_cpp.o needs to be linked
12
statically, if needed.                  - HB
13
 
14
Darwin/MacOSX Support - December 16, 2003
15
=========================================
16
 
17
Important Usage Notes
18
=====================
19
 
20
GC_init() MUST be called before calling any other GC functions. This
21
is necessary to properly register segments in dynamic libraries. This
22
call is required even if you code does not use dynamic libraries as the
23
dyld code handles registering all data segments.
24
 
25
When your use of the garbage collector is confined to dylibs and you
26
cannot call GC_init() before your libraries' static initializers have
27
run and perhaps called GC_malloc(), create an initialization routine
28
for each library to call GC_init():
29
 
30
#include 
31
extern "C" void my_library_init() { GC_init(); }
32
 
33
Compile this code into a my_library_init.o, and link it into your
34
dylib. When you link the dylib, pass the -init argument with
35
_my_library_init (e.g. gcc -dynamiclib -o my_library.dylib a.o b.o c.o
36
my_library_init.o -init _my_library_init). This causes
37
my_library_init() to be called before any static initializers, and
38
will initialize the garbage collector properly.
39
 
40
Note: It doesn't hurt to call GC_init() more than once, so it's best,
41
if you have an application or set of libraries that all use the
42
garbage collector, to create an initialization routine for each of
43
them that calls GC_init(). Better safe than sorry.
44
 
45
The incremental collector is still a bit flaky on darwin. It seems to
46
work reliably with workarounds for a few possible bugs in place however
47
these workaround may not work correctly in all cases. There may also
48
be additional problems that I have not found.
49
 
50
Thread-local GC allocation will not work with threads that are not
51
created using the GC-provided override of pthread_create(). Threads
52
created without the GC-provided pthread_create() do not have the
53
necessary data structures in the GC to store this data.
54
 
55
 
56
Implementation Information
57
==========================
58
Darwin/MacOSX support is nearly complete. Thread support is reliable on
59
Darwin 6.x (MacOSX 10.2) and there have been reports of success on older
60
Darwin versions (MacOSX 10.1). Shared library support had also been
61
added and the gc can be run from a shared library. There is currently only
62
support for Darwin/PPC although adding x86 support should be trivial.
63
 
64
Thread support is implemented in terms of mach thread_suspend and
65
thread_resume calls. These provide a very clean interface to thread
66
suspension. This implementation doesn't rely on pthread_kill so the
67
code works on Darwin < 6.0 (MacOSX 10.1). All the code to stop and
68
start the world is located in darwin_stop_world.c.
69
 
70
Since not all uses of the GC enable clients to override pthread_create()
71
before threads have been created, the code for stopping the world has
72
been rewritten to look for threads using Mach kernel calls. Each
73
thread identified in this way is suspended and resumed as above. In
74
addition, since Mach kernel threads do not contain pointers to their
75
stacks, a stack-walking function has been written to find the stack
76
limits. Given an initial stack pointer (for the current thread, a
77
pointer to a stack-allocated local variable will do; for a non-active
78
thread, we grab the value of register 1 (on PowerPC)), it
79
will walk the PPC Mach-O-ABI compliant stack chain until it reaches the
80
top of the stack. This appears to work correctly for GCC-compiled C,
81
C++, Objective-C, and Objective-C++ code, as well as for Java
82
programs that use JNI. If you run code that does not follow the stack
83
layout or stack pointer conventions laid out in the PPC Mach-O ABI,
84
then this will likely crash the garbage collector.
85
 
86
The original incremental collector support unfortunatelly no longer works
87
on recent Darwin versions. It also relied on some undocumented kernel
88
structures. Mach, however, does have a very clean interface to exception
89
handing. The current implementation uses Mach's exception handling.
90
 
91
Much thanks goes to Andrew Stone, Dietmar Planitzer, Andrew Begel,
92
Jeff Sturm, and Jesse Rosenstock for all their work on the
93
Darwin/OS X port.
94
 
95
-Brian Alliet
96
brian@brianweb.net
97
 
98
 
99
Older Information (Most of this no longer applies to the current code)
100
======================================================================
101
 
102
While the GC should work on MacOS X Server, MacOS X and Darwin, I only tested
103
it on MacOS X Server.
104
I've added a PPC assembly version of GC_push_regs(), thus the setjmp() hack is
105
no longer necessary. Incremental collection is supported via mprotect/signal.
106
The current solution isn't really optimal because the signal handler must decode
107
the faulting PPC machine instruction in order to find the correct heap address.
108
Further, it must poke around in the register state which the kernel saved away
109
in some obscure register state structure before it calls the signal handler -
110
needless to say the layout of this structure is no where documented.
111
Threads and dynamic libraries are not yet supported (adding dynamic library
112
support via the low-level dyld API shouldn't be that hard).
113
 
114
The original MacOS X port was brought to you by Andrew Stone.
115
 
116
 
117
June, 1 2000
118
 
119
Dietmar Planitzer
120
dave.pl@ping.at
121
 
122
Note from Andrew Begel:
123
 
124
One more fix to enable gc.a to link successfully into a shared library for
125
MacOS X. You have to add -fno-common to the CFLAGS in the Makefile. MacOSX
126
disallows common symbols in anything that eventually finds its way into a
127
shared library. (I don't completely understand why, but -fno-common seems to
128
work and doesn't mess up the garbage collector's functionality).
129
 
130
Feb 26, 2003
131
 
132
Jeff Sturm and Jesse Rosenstock provided a patch that adds thread support.
133
GC_MACOSX_THREADS should be defined in the build and in clients.  Real
134
dynamic library support is still missing, i.e. dynamic library data segments
135
are still not scanned.  Code that stores pointers to the garbage collected
136
heap in statically allocated variables should not reside in a dynamic
137
library.  This still doesn't appear to be 100% reliable.
138
 
139
Mar 10, 2003
140
Brian Alliet contributed dynamic library support for MacOSX.  It could also
141
use more testing.

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.