OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [boehm-gc/] [doc/] [leak.html] - Blame information for rev 721

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 721 jeremybenn
<HTML>
2
<HEAD>
3
<TITLE>Using the Garbage Collector as Leak Detector</title>
4
</head>
5
<BODY>
6
<H1>Using the Garbage Collector as Leak Detector</h1>
7
The garbage collector may be used as a leak detector.
8
In this case, the primary function of the collector is to report
9
objects that were allocated (typically with <TT>GC_MALLOC</tt>),
10
not deallocated (normally with <TT>GC_FREE</tt>), but are
11
no longer accessible.  Since the object is no longer accessible,
12
there in normally no way to deallocate the object at a later time;
13
thus it can safely be assumed that the object has been "leaked".
14
<P>
15
This is substantially different from counting leak detectors,
16
which simply verify that all allocated objects are eventually
17
deallocated.  A garbage-collector based leak detector can provide
18
somewhat more precise information when an object was leaked.
19
More importantly, it does not report objects that are never
20
deallocated because they are part of "permanent" data structures.
21
Thus it does not require all objects to be deallocated at process
22
exit time, a potentially useless activity that often triggers
23
large amounts of paging.
24
<P>
25
All non-ancient versions of the garbage collector provide
26
leak detection support.  Version 5.3 adds the following
27
features:
28
<OL>
29
<LI> Leak detection mode can be initiated at run-time by
30
setting GC_find_leak instead of building the collector with FIND_LEAK
31
defined.  This variable should be set to a nonzero value
32
at program startup.
33
<LI> Leaked objects should be reported and then correctly garbage collected.
34
Prior versions either reported leaks or functioned as a garbage collector.
35
</ol>
36
For the rest of this description we will give instructions that work
37
with any reasonable version of the collector.
38
<P>
39
To use the collector as a leak detector, follow the following steps:
40
<OL>
41
<LI> Build the collector with -DFIND_LEAK.  Otherwise use default
42
build options.
43
<LI> Change the program so that all allocation and deallocation goes
44
through the garbage collector.
45
<LI> Arrange to call <TT>GC_gcollect</tt> at appropriate points to check
46
for leaks.
47
(For sufficiently long running programs, this will happen implicitly,
48
but probably not with sufficient frequency.)
49
</ol>
50
The second step can usually be accomplished with the
51
<TT>-DREDIRECT_MALLOC=GC_malloc</tt> option when the collector is built,
52
or by defining <TT>malloc</tt>, <TT>calloc</tt>,
53
<TT>realloc</tt> and <TT>free</tt>
54
to call the corresponding garbage collector functions.
55
But this, by itself, will not yield very informative diagnostics,
56
since the collector does not keep track of information about
57
how objects were allocated.  The error reports will include
58
only object addresses.
59
<P>
60
For more precise error reports, as much of the program as possible
61
should use the all uppercase variants of these functions, after
62
defining <TT>GC_DEBUG</tt>, and then including <TT>gc.h</tt>.
63
In this environment <TT>GC_MALLOC</tt> is a macro which causes
64
at least the file name and line number at the allocation point to
65
be saved as part of the object.  Leak reports will then also include
66
this information.
67
<P>
68
Many collector features (<I>e.g</i> stubborn objects, finalization,
69
and disappearing links) are less useful in this context, and are not
70
fully supported.  Their use will usually generate additional bogus
71
leak reports, since the collector itself drops some associated objects.
72
<P>
73
The same is generally true of thread support.  However, as of 6.0alpha4,
74
correct leak reports should be generated with linuxthreads.
75
<P>
76
On a few platforms (currently Solaris/SPARC, Irix, and, with -DSAVE_CALL_CHAIN,
77
Linux/X86), <TT>GC_MALLOC</tt>
78
also causes some more information about its call stack to be saved
79
in the object.  Such information is reproduced in the error
80
reports in very non-symbolic form, but it can be very useful with the
81
aid of a debugger.
82
<H2>An Example</h2>
83
The following header file <TT>leak_detector.h</tt> is included in the
84
"include" subdirectory of the distribution:
85
<PRE>
86
#define GC_DEBUG
87
#include "gc.h"
88
#define malloc(n) GC_MALLOC(n)
89
#define calloc(m,n) GC_MALLOC((m)*(n))
90
#define free(p) GC_FREE(p)
91
#define realloc(p,n) GC_REALLOC((p),(n))
92
#define CHECK_LEAKS() GC_gcollect()
93
</pre>
94
<P>
95
Assume the collector has been built with -DFIND_LEAK.  (For very
96
new versions of the collector, we could instead add the statement
97
<TT>GC_find_leak = 1</tt> as the first statement in <TT>main</tt>.
98
<P>
99
The program to be tested for leaks can then look like:
100
<PRE>
101
#include "leak_detector.h"
102
 
103
main() {
104
    int *p[10];
105
    int i;
106
    /* GC_find_leak = 1; for new collector versions not         */
107
    /* compiled with -DFIND_LEAK.                               */
108
    for (i = 0; i < 10; ++i) {
109
        p[i] = malloc(sizeof(int)+i);
110
    }
111
    for (i = 1; i < 10; ++i) {
112
        free(p[i]);
113
    }
114
    for (i = 0; i < 9; ++i) {
115
        p[i] = malloc(sizeof(int)+i);
116
    }
117
    CHECK_LEAKS();
118
}
119
</pre>
120
<P>
121
On an Intel X86 Linux system this produces on the stderr stream:
122
<PRE>
123
Leaked composite object at 0x806dff0 (leak_test.c:8, sz=4)
124
</pre>
125
(On most unmentioned operating systems, the output is similar to this.
126
If the collector had been built on Linux/X86 with -DSAVE_CALL_CHAIN,
127
the output would be closer to the Solaris example. For this to work,
128
the program should not be compiled with -fomit_frame_pointer.)
129
<P>
130
On Irix it reports
131
<PRE>
132
Leaked composite object at 0x10040fe0 (leak_test.c:8, sz=4)
133
        Caller at allocation:
134
                ##PC##= 0x10004910
135
</pre>
136
and on Solaris the error report is
137
<PRE>
138
Leaked composite object at 0xef621fc8 (leak_test.c:8, sz=4)
139
        Call chain at allocation:
140
                args: 4 (0x4), 200656 (0x30FD0)
141
                ##PC##= 0x14ADC
142
                args: 1 (0x1), -268436012 (0xEFFFFDD4)
143
                ##PC##= 0x14A64
144
</pre>
145
In the latter two cases some additional information is given about
146
how malloc was called when the leaked object was allocated.  For
147
Solaris, the first line specifies the arguments to <TT>GC_debug_malloc</tt>
148
(the actual allocation routine), The second the program counter inside
149
main, the third the arguments to <TT>main</tt>, and finally the program
150
counter inside the caller to main (i.e. in the C startup code).
151
<P>
152
In the Irix case, only the address inside the caller to main is given.
153
<P>
154
In many cases, a debugger is needed to interpret the additional information.
155
On systems supporting the "adb" debugger, the <TT>callprocs</tt> script
156
can be used to replace program counter values with symbolic names.
157
As of version 6.1, the collector tries to generate symbolic names for
158
call stacks if it knows how to do so on the platform.  This is true on
159
Linux/X86, but not on most other platforms.
160
<H2>Simplified leak detection under Linux</h2>
161
Since version 6.1, it should be possible to run the collector in leak
162
detection mode on a program a.out under Linux/X86 as follows:
163
<OL>
164
<LI> Ensure that a.out is a single-threaded executable.  This doesn't yet work
165
for multithreaded programs.
166
<LI> If possible, ensure that the addr2line program is installed in
167
/usr/bin.  (It comes with RedHat Linux.)
168
<LI> If possible, compile a.out with full debug information.
169
This will improve the quality of the leak reports.  With this approach, it is
170
no longer necessary to call GC_ routines explicitly, though that can also
171
improve the quality of the leak reports.
172
<LI> Build the collector and install it in directory <I>foo</i> as follows:
173
<UL>
174
<LI> configure --prefix=<I>foo</i> --enable-full-debug --enable-redirect-malloc
175
--disable-threads
176
<LI> make
177
<LI> make install
178
</ul>
179
<LI> Set environment variables as follows:
180
<UL>
181
<LI> LD_PRELOAD=<I>foo</i>/lib/libgc.so
182
<LI> GC_FIND_LEAK
183
<LI> You may also want to set GC_PRINT_STATS (to confirm that the collector
184
is running) and/or GC_LOOP_ON_ABORT (to facilitate debugging from another
185
window if something goes wrong).
186
</ul
187
<LI> Simply run a.out as you normally would.  Note that if you run anything
188
else (<I>e.g.</i> your editor) with those environment variables set,
189
it will also be leak tested.  This may or may not be useful and/or
190
embarrassing.  It can generate
191
mountains of leak reports if the application wasn't designed to avoid leaks,
192
<I>e.g.</i> because it's always short-lived.
193
</ol>
194
This has not yet been thropughly tested on large applications, but it's known
195
to do the right thing on at least some small ones.
196
</body>
197
</html>

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.