Subversion Repositories openrisc

------------------------------------------------------------------------------

--                                                                          --

--                 GNAT RUN-TIME LIBRARY (GNARL) COMPONENTS                 --

--                                                                          --

--                     S Y S T E M . I N T E R R U P T S                    --

--                                                                          --

--                                  B o d y                                 --

--                                                                          --

--         Copyright (C) 1992-2011, Free Software Foundation, Inc.          --

--                                                                          --

-- GNARL is free software; you can  redistribute it  and/or modify it under --

-- terms of the  GNU General Public License as published  by the Free Soft- --

-- ware  Foundation;  either version 3,  or (at your option) any later ver- --

-- sion.  GNAT is distributed in the hope that it will be useful, but WITH- --

-- OUT ANY WARRANTY;  without even the  implied warranty of MERCHANTABILITY --

-- or FITNESS FOR A PARTICULAR PURPOSE.                                     --

--                                                                          --

-- As a special exception under Section 7 of GPL version 3, you are granted --

-- additional permissions described in the GCC Runtime Library Exception,   --

-- version 3.1, as published by the Free Software Foundation.               --

--                                                                          --

-- You should have received a copy of the GNU General Public License and    --

-- a copy of the GCC Runtime Library Exception along with this program;     --

-- see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see    --

-- <http://www.gnu.org/licenses/>.                                          --

--                                                                          --

-- GNARL was developed by the GNARL team at Florida State University.       --

-- Extensive contributions were provided by Ada Core Technologies, Inc.     --

--                                                                          --

------------------------------------------------------------------------------

--  Invariants:

--  All user-handleable signals are masked at all times in all tasks/threads

--  except possibly for the Interrupt_Manager task.

--  When a user task wants to have the effect of masking/unmasking an signal,

--  it must call Block_Interrupt/Unblock_Interrupt, which will have the effect

--  of unmasking/masking the signal in the Interrupt_Manager task. These

--  comments do not apply to vectored hardware interrupts, which may be masked

--  or unmasked using routined interfaced to the relevant embedded RTOS system

--  calls.

--  Once we associate a Signal_Server_Task with an signal, the task never goes

--  away, and we never remove the association. On the other hand, it is more

--  convenient to terminate an associated Interrupt_Server_Task for a vectored

--  hardware interrupt (since we use a binary semaphore for synchronization

--  with the umbrella handler).

--  There is no more than one signal per Signal_Server_Task and no more than

--  one Signal_Server_Task per signal. The same relation holds for hardware

--  interrupts and Interrupt_Server_Task's at any given time. That is, only

--  one non-terminated Interrupt_Server_Task exists for a give interrupt at

--  any time.

--  Within this package, the lock L is used to protect the various status

--  tables. If there is a Server_Task associated with a signal or interrupt, we

--  use the per-task lock of the Server_Task instead so that we protect the

--  status between Interrupt_Manager and Server_Task. Protection among service

--  requests are ensured via user calls to the Interrupt_Manager entries.

--  This is reasonably generic version of this package, supporting vectored

--  hardware interrupts using non-RTOS specific adapter routines which

--  should easily implemented on any RTOS capable of supporting GNAT.

with Ada.Unchecked_Conversion;

with Ada.Task_Identification;

with Interfaces.C; use Interfaces.C;

with System.OS_Interface; use System.OS_Interface;

with System.Interrupt_Management;

with System.Task_Primitives.Operations;

with System.Storage_Elements;

with System.Tasking.Utilities;

with System.Tasking.Rendezvous;

pragma Elaborate_All (System.Tasking.Rendezvous);

package body System.Interrupts is

   use Tasking;

   package POP renames System.Task_Primitives.Operations;

   function To_Ada is new Ada.Unchecked_Conversion

     (System.Tasking.Task_Id, Ada.Task_Identification.Task_Id);

   function To_System is new Ada.Unchecked_Conversion

     (Ada.Task_Identification.Task_Id, Task_Id);

   -----------------

   -- Local Tasks --

   -----------------

   --  WARNING: System.Tasking.Stages performs calls to this task with

   --  low-level constructs. Do not change this spec without synchronizing it.

   task Interrupt_Manager is

      entry Detach_Interrupt_Entries (T : Task_Id);

      entry Attach_Handler

        (New_Handler : Parameterless_Handler;

         Interrupt   : Interrupt_ID;

         Static      : Boolean;

         Restoration : Boolean := False);

      entry Exchange_Handler

        (Old_Handler : out Parameterless_Handler;

         New_Handler : Parameterless_Handler;

         Interrupt   : Interrupt_ID;

         Static      : Boolean);

      entry Detach_Handler

        (Interrupt : Interrupt_ID;

         Static    : Boolean);

      entry Bind_Interrupt_To_Entry

        (T         : Task_Id;

         E         : Task_Entry_Index;

         Interrupt : Interrupt_ID);

      pragma Interrupt_Priority (System.Interrupt_Priority'First);

   end Interrupt_Manager;

   task type Interrupt_Server_Task

     (Interrupt : Interrupt_ID; Int_Sema : Binary_Semaphore_Id) is

      --  Server task for vectored hardware interrupt handling

      pragma Interrupt_Priority (System.Interrupt_Priority'First + 2);

   end Interrupt_Server_Task;

   type Interrupt_Task_Access is access Interrupt_Server_Task;

   -------------------------------

   -- Local Types and Variables --

   -------------------------------

   type Entry_Assoc is record

      T : Task_Id;

      E : Task_Entry_Index;

   end record;

   type Handler_Assoc is record

      H      : Parameterless_Handler;

      Static : Boolean;   --  Indicates static binding;

   end record;

   User_Handler : array (Interrupt_ID) of Handler_Assoc :=

     (others => (null, Static => False));

   pragma Volatile_Components (User_Handler);

   --  Holds the protected procedure handler (if any) and its Static

   --  information  for each interrupt or signal. A handler is static

   --  iff it is specified through the pragma Attach_Handler.

   User_Entry : array (Interrupt_ID) of Entry_Assoc :=

     (others => (T => Null_Task, E => Null_Task_Entry));

   pragma Volatile_Components (User_Entry);

   --  Holds the task and entry index (if any) for each interrupt / signal

   --  Type and Head, Tail of the list containing Registered Interrupt

   --  Handlers. These definitions are used to register the handlers

   --  specified by the pragma Interrupt_Handler.

   type Registered_Handler;

   type R_Link is access all Registered_Handler;

   type Registered_Handler is record

      H    : System.Address := System.Null_Address;

      Next : R_Link := null;

   end record;

   Registered_Handler_Head : R_Link := null;

   Registered_Handler_Tail : R_Link := null;

   Server_ID : array (Interrupt_ID) of System.Tasking.Task_Id :=

     (others => System.Tasking.Null_Task);

   pragma Atomic_Components (Server_ID);

   --  Holds the Task_Id of the Server_Task for each interrupt / signal.

   --  Task_Id is needed to accomplish locking per interrupt base. Also

   --  is needed to determine whether to create a new Server_Task.

   Semaphore_ID_Map : array

     (Interrupt_ID range 0 .. System.OS_Interface.Max_HW_Interrupt)

      of Binary_Semaphore_Id := (others => 0);

   --  Array of binary semaphores associated with vectored interrupts

   --  Note that the last bound should be Max_HW_Interrupt, but this will raise

   --  Storage_Error if Num_HW_Interrupts is null, so use an extra 4 bytes

   --  instead.

   Interrupt_Access_Hold : Interrupt_Task_Access;

   --  Variable for allocating an Interrupt_Server_Task

   Handler_Installed : array (HW_Interrupt) of Boolean := (others => False);

   --  True if Notify_Interrupt was connected to the interrupt.  Handlers

   --  can be connected but disconnection is not possible on VxWorks.

   --  Therefore we ensure Notify_Installed is connected at most once.

   -----------------------

   -- Local Subprograms --

   -----------------------

   procedure Check_Reserved_Interrupt (Interrupt : Interrupt_ID);

   --  Check if Id is a reserved interrupt, and if so raise Program_Error

   --  with an appropriate message, otherwise return.

   procedure Finalize_Interrupt_Servers;

   --  Unbind the handlers for hardware interrupt server tasks at program

   --  termination.

   function Is_Registered (Handler : Parameterless_Handler) return Boolean;

   --  See if Handler has been "pragma"ed using Interrupt_Handler.

   --  Always consider a null handler as registered.

   procedure Notify_Interrupt (Param : System.Address);

   pragma Convention (C, Notify_Interrupt);

   --  Umbrella handler for vectored interrupts (not signals)

   procedure Install_Umbrella_Handler

     (Interrupt : HW_Interrupt;

      Handler   : System.OS_Interface.Interrupt_Handler);

   --  Install the runtime umbrella handler for a vectored hardware

   --  interrupt

   procedure Unimplemented (Feature : String);

   pragma No_Return (Unimplemented);

   --  Used to mark a call to an unimplemented function. Raises Program_Error

   --  with an appropriate message noting that Feature is unimplemented.

   --------------------

   -- Attach_Handler --

   --------------------

   --  Calling this procedure with New_Handler = null and Static = True

   --  means we want to detach the current handler regardless of the

   --  previous handler's binding status (i.e. do not care if it is a

   --  dynamic or static handler).

   --  This option is needed so that during the finalization of a PO, we

   --  can detach handlers attached through pragma Attach_Handler.

   procedure Attach_Handler

     (New_Handler : Parameterless_Handler;

      Interrupt   : Interrupt_ID;

      Static      : Boolean := False) is

   begin

      Check_Reserved_Interrupt (Interrupt);

      Interrupt_Manager.Attach_Handler (New_Handler, Interrupt, Static);

   end Attach_Handler;

   -----------------------------

   -- Bind_Interrupt_To_Entry --

   -----------------------------

   --  This procedure raises a Program_Error if it tries to

   --  bind an interrupt to which an Entry or a Procedure is

   --  already bound.

   procedure Bind_Interrupt_To_Entry

     (T       : Task_Id;

      E       : Task_Entry_Index;

      Int_Ref : System.Address)

   is

      Interrupt : constant Interrupt_ID :=

        Interrupt_ID (Storage_Elements.To_Integer (Int_Ref));

   begin

      Check_Reserved_Interrupt (Interrupt);

      Interrupt_Manager.Bind_Interrupt_To_Entry (T, E, Interrupt);

   end Bind_Interrupt_To_Entry;

   ---------------------

   -- Block_Interrupt --

   ---------------------

   procedure Block_Interrupt (Interrupt : Interrupt_ID) is

   begin

      Unimplemented ("Block_Interrupt");

   end Block_Interrupt;

   ------------------------------

   -- Check_Reserved_Interrupt --

   ------------------------------

   procedure Check_Reserved_Interrupt (Interrupt : Interrupt_ID) is

   begin

      if Is_Reserved (Interrupt) then

         raise Program_Error with

           "Interrupt" & Interrupt_ID'Image (Interrupt) & " is reserved";

      else

         return;

      end if;

   end Check_Reserved_Interrupt;

   ---------------------

   -- Current_Handler --

   ---------------------

   function Current_Handler

     (Interrupt : Interrupt_ID) return Parameterless_Handler

   is

   begin

      Check_Reserved_Interrupt (Interrupt);

      --  ??? Since Parameterless_Handler is not Atomic, the

      --  current implementation is wrong. We need a new service in

      --  Interrupt_Manager to ensure atomicity.

      return User_Handler (Interrupt).H;

   end Current_Handler;

   --------------------

   -- Detach_Handler --

   --------------------

   --  Calling this procedure with Static = True means we want to Detach the

   --  current handler regardless of the previous handler's binding status

   --  (i.e. do not care if it is a dynamic or static handler).

   --  This option is needed so that during the finalization of a PO, we can

   --  detach handlers attached through pragma Attach_Handler.

   procedure Detach_Handler

     (Interrupt : Interrupt_ID;

      Static    : Boolean := False) is

   begin

      Check_Reserved_Interrupt (Interrupt);

      Interrupt_Manager.Detach_Handler (Interrupt, Static);

   end Detach_Handler;

   ------------------------------

   -- Detach_Interrupt_Entries --

   ------------------------------

   procedure Detach_Interrupt_Entries (T : Task_Id) is

   begin

      Interrupt_Manager.Detach_Interrupt_Entries (T);

   end Detach_Interrupt_Entries;

   ----------------------

   -- Exchange_Handler --

   ----------------------

   --  Calling this procedure with New_Handler = null and Static = True

   --  means we want to detach the current handler regardless of the

   --  previous handler's binding status (i.e. do not care if it is a

   --  dynamic or static handler).

   --  This option is needed so that during the finalization of a PO, we

   --  can detach handlers attached through pragma Attach_Handler.

   procedure Exchange_Handler

     (Old_Handler : out Parameterless_Handler;

      New_Handler : Parameterless_Handler;

      Interrupt   : Interrupt_ID;

      Static      : Boolean := False)

   is

   begin

      Check_Reserved_Interrupt (Interrupt);

      Interrupt_Manager.Exchange_Handler

        (Old_Handler, New_Handler, Interrupt, Static);

   end Exchange_Handler;

   --------------

   -- Finalize --

   --------------

   procedure Finalize (Object : in out Static_Interrupt_Protection) is

   begin

      --  ??? loop to be executed only when we're not doing library level

      --  finalization, since in this case all interrupt / signal tasks are

      --  gone.

      if not Interrupt_Manager'Terminated then

         for N in reverse Object.Previous_Handlers'Range loop

            Interrupt_Manager.Attach_Handler

              (New_Handler => Object.Previous_Handlers (N).Handler,

               Interrupt   => Object.Previous_Handlers (N).Interrupt,

               Static      => Object.Previous_Handlers (N).Static,

               Restoration => True);

         end loop;

      end if;

      Tasking.Protected_Objects.Entries.Finalize

        (Tasking.Protected_Objects.Entries.Protection_Entries (Object));

   end Finalize;

   --------------------------------

   -- Finalize_Interrupt_Servers --

   --------------------------------

   --  Restore default handlers for interrupt servers

   --  This is called by the Interrupt_Manager task when it receives the abort

   --  signal during program finalization.

   procedure Finalize_Interrupt_Servers is

      HW_Interrupts : constant Boolean := HW_Interrupt'Last >= 0;

   begin

      if HW_Interrupts then

         for Int in HW_Interrupt loop

            if Server_ID (Interrupt_ID (Int)) /= null

              and then

                not Ada.Task_Identification.Is_Terminated

                 (To_Ada (Server_ID (Interrupt_ID (Int))))

            then

               Interrupt_Manager.Attach_Handler

                 (New_Handler => null,

                  Interrupt => Interrupt_ID (Int),

                  Static => True,

                  Restoration => True);

            end if;

         end loop;

      end if;

   end Finalize_Interrupt_Servers;

   -------------------------------------

   -- Has_Interrupt_Or_Attach_Handler --

   -------------------------------------

   function Has_Interrupt_Or_Attach_Handler

     (Object : access Dynamic_Interrupt_Protection)

      return   Boolean

   is

      pragma Unreferenced (Object);

   begin

      return True;

   end Has_Interrupt_Or_Attach_Handler;

   function Has_Interrupt_Or_Attach_Handler

     (Object : access Static_Interrupt_Protection)

      return   Boolean

   is

      pragma Unreferenced (Object);

   begin

      return True;

   end Has_Interrupt_Or_Attach_Handler;

   ----------------------

   -- Ignore_Interrupt --

   ----------------------

   procedure Ignore_Interrupt (Interrupt : Interrupt_ID) is

   begin

      Unimplemented ("Ignore_Interrupt");

   end Ignore_Interrupt;

   ----------------------

   -- Install_Handlers --

   ----------------------

   procedure Install_Handlers

     (Object       : access Static_Interrupt_Protection;

      New_Handlers : New_Handler_Array)

   is

   begin

      for N in New_Handlers'Range loop

         --  We need a lock around this ???

         Object.Previous_Handlers (N).Interrupt := New_Handlers (N).Interrupt;

         Object.Previous_Handlers (N).Static    := User_Handler

           (New_Handlers (N).Interrupt).Static;

         --  We call Exchange_Handler and not directly Interrupt_Manager.

         --  Exchange_Handler so we get the Is_Reserved check.

         Exchange_Handler

           (Old_Handler => Object.Previous_Handlers (N).Handler,

            New_Handler => New_Handlers (N).Handler,

            Interrupt   => New_Handlers (N).Interrupt,

            Static      => True);

      end loop;

   end Install_Handlers;

   ---------------------------------

   -- Install_Restricted_Handlers --

   ---------------------------------

   procedure Install_Restricted_Handlers (Handlers : New_Handler_Array) is

   begin

      for N in Handlers'Range loop

         Attach_Handler (Handlers (N).Handler, Handlers (N).Interrupt, True);

      end loop;

   end Install_Restricted_Handlers;

   ------------------------------

   -- Install_Umbrella_Handler --

   ------------------------------

   procedure Install_Umbrella_Handler

     (Interrupt : HW_Interrupt;

      Handler   : System.OS_Interface.Interrupt_Handler)

   is

      Vec : constant Interrupt_Vector :=

              Interrupt_Number_To_Vector (int (Interrupt));

      Status : int;

   begin

      --  Only install umbrella handler when no Ada handler has already been

      --  installed. Note that the interrupt number is passed as a parameter

      --  when an interrupt occurs, so the umbrella handler has a different

      --  wrapper generated by intConnect for each interrupt number.

      if not Handler_Installed (Interrupt) then

         Status :=

            Interrupt_Connect (Vec, Handler, System.Address (Interrupt));

         pragma Assert (Status = 0);

         Handler_Installed (Interrupt) := True;

      end if;

   end Install_Umbrella_Handler;

   ----------------

   -- Is_Blocked --

   ----------------

   function Is_Blocked (Interrupt : Interrupt_ID) return Boolean is

   begin

      Unimplemented ("Is_Blocked");

      return False;

   end Is_Blocked;

   -----------------------

   -- Is_Entry_Attached --

   -----------------------

   function Is_Entry_Attached (Interrupt : Interrupt_ID) return Boolean is

   begin

      Check_Reserved_Interrupt (Interrupt);

      return User_Entry (Interrupt).T /= Null_Task;

   end Is_Entry_Attached;

   -------------------------

   -- Is_Handler_Attached --

   -------------------------

   function Is_Handler_Attached (Interrupt : Interrupt_ID) return Boolean is

   begin

      Check_Reserved_Interrupt (Interrupt);

      return User_Handler (Interrupt).H /= null;

   end Is_Handler_Attached;

   ----------------

   -- Is_Ignored --

   ----------------

   function Is_Ignored (Interrupt : Interrupt_ID) return Boolean is

   begin

      Unimplemented ("Is_Ignored");

      return False;

   end Is_Ignored;

   -------------------

   -- Is_Registered --

   -------------------

   function Is_Registered (Handler : Parameterless_Handler) return Boolean is

      type Fat_Ptr is record

         Object_Addr  : System.Address;

         Handler_Addr : System.Address;

      end record;

      function To_Fat_Ptr is new Ada.Unchecked_Conversion

        (Parameterless_Handler, Fat_Ptr);

      Ptr : R_Link;

      Fat : Fat_Ptr;

   begin

      if Handler = null then

         return True;

      end if;

      Fat := To_Fat_Ptr (Handler);

      Ptr := Registered_Handler_Head;

      while Ptr /= null loop

         if Ptr.H = Fat.Handler_Addr then

            return True;

         end if;

         Ptr := Ptr.Next;

      end loop;

      return False;

   end Is_Registered;

   -----------------

   -- Is_Reserved --

   -----------------

   function Is_Reserved (Interrupt : Interrupt_ID) return Boolean is

      use System.Interrupt_Management;

   begin

      return Reserve (System.Interrupt_Management.Interrupt_ID (Interrupt));

   end Is_Reserved;

   ----------------------

   -- Notify_Interrupt --

   ----------------------

   --  Umbrella handler for vectored hardware interrupts (as opposed to

   --  signals and exceptions).  As opposed to the signal implementation,

   --  this handler is installed in the vector table when the first Ada

   --  handler is attached to the interrupt.  However because VxWorks don't

   --  support disconnecting handlers, this subprogram always test whether

   --  or not an Ada handler is effectively attached.

   --  Otherwise, the handler that existed prior to program startup is

   --  in the vector table.  This ensures that handlers installed by

   --  the BSP are active unless explicitly replaced in the program text.

   --  Each Interrupt_Server_Task has an associated binary semaphore

   --  on which it pends once it's been started.  This routine determines

   --  The appropriate semaphore and issues a semGive call, waking

   --  the server task.  When a handler is unbound,

   --  System.Interrupts.Unbind_Handler issues a Binary_Semaphore_Flush,

   --  and the server task deletes its semaphore and terminates.

   procedure Notify_Interrupt (Param : System.Address) is

      Interrupt : constant Interrupt_ID := Interrupt_ID (Param);

      Id : constant Binary_Semaphore_Id := Semaphore_ID_Map (Interrupt);

      Status : int;

   begin

      if Id /= 0 then

         Status := Binary_Semaphore_Release (Id);

         pragma Assert (Status = 0);

      end if;

   end Notify_Interrupt;

   ---------------

   -- Reference --

   ---------------

   function Reference (Interrupt : Interrupt_ID) return System.Address is

   begin

      Check_Reserved_Interrupt (Interrupt);

      return Storage_Elements.To_Address

        (Storage_Elements.Integer_Address (Interrupt));

   end Reference;

   --------------------------------

   -- Register_Interrupt_Handler --

   --------------------------------

   procedure Register_Interrupt_Handler (Handler_Addr : System.Address) is

      New_Node_Ptr : R_Link;

   begin

      --  This routine registers a handler as usable for dynamic

      --  interrupt handler association. Routines attaching and detaching

      --  handlers dynamically should determine whether the handler is

      --  registered. Program_Error should be raised if it is not registered.

      --  Pragma Interrupt_Handler can only appear in a library

      --  level PO definition and instantiation. Therefore, we do not need

      --  to implement an unregister operation. Nor do we need to

      --  protect the queue structure with a lock.

      pragma Assert (Handler_Addr /= System.Null_Address);

      New_Node_Ptr := new Registered_Handler;

      New_Node_Ptr.H := Handler_Addr;

      if Registered_Handler_Head = null then

         Registered_Handler_Head := New_Node_Ptr;

         Registered_Handler_Tail := New_Node_Ptr;

      else

         Registered_Handler_Tail.Next := New_Node_Ptr;

         Registered_Handler_Tail := New_Node_Ptr;

      end if;

   end Register_Interrupt_Handler;

   -----------------------

   -- Unblock_Interrupt --

   -----------------------

   procedure Unblock_Interrupt (Interrupt : Interrupt_ID) is

   begin

      Unimplemented ("Unblock_Interrupt");

   end Unblock_Interrupt;

   ------------------

   -- Unblocked_By --

   ------------------

   function Unblocked_By

     (Interrupt : Interrupt_ID) return System.Tasking.Task_Id

   is

   begin

      Unimplemented ("Unblocked_By");

      return Null_Task;

   end Unblocked_By;

   ------------------------

   -- Unignore_Interrupt --

   ------------------------

   procedure Unignore_Interrupt (Interrupt : Interrupt_ID) is

   begin

      Unimplemented ("Unignore_Interrupt");

   end Unignore_Interrupt;

   -------------------

   -- Unimplemented --

   -------------------

   procedure Unimplemented (Feature : String) is

   begin

      raise Program_Error with Feature & " not implemented on VxWorks";

   end Unimplemented;

   -----------------------

   -- Interrupt_Manager --

   -----------------------

   task body Interrupt_Manager is

      --------------------

      -- Local Routines --

      --------------------

      procedure Bind_Handler (Interrupt : Interrupt_ID);

      --  This procedure does not do anything if a signal is blocked.

      --  Otherwise, we have to interrupt Server_Task for status change through

      --  a wakeup signal.

      procedure Unbind_Handler (Interrupt : Interrupt_ID);

      --  This procedure does not do anything if a signal is blocked.

      --  Otherwise, we have to interrupt Server_Task for status change

      --  through an abort signal.

      procedure Unprotected_Exchange_Handler

        (Old_Handler : out Parameterless_Handler;

         New_Handler : Parameterless_Handler;

         Interrupt   : Interrupt_ID;

         Static      : Boolean;

         Restoration : Boolean := False);

      procedure Unprotected_Detach_Handler

        (Interrupt : Interrupt_ID;

         Static    : Boolean);

      ------------------

      -- Bind_Handler --

      ------------------

      procedure Bind_Handler (Interrupt : Interrupt_ID) is

      begin

         Install_Umbrella_Handler

           (HW_Interrupt (Interrupt), Notify_Interrupt'Access);

      end Bind_Handler;

      --------------------

      -- Unbind_Handler --

      --------------------

      procedure Unbind_Handler (Interrupt : Interrupt_ID) is

         Status : int;

      begin

         --  Flush server task off semaphore, allowing it to terminate

         Status := Binary_Semaphore_Flush (Semaphore_ID_Map (Interrupt));

         pragma Assert (Status = 0);

      end Unbind_Handler;

      --------------------------------

      -- Unprotected_Detach_Handler --

      --------------------------------

      procedure Unprotected_Detach_Handler

        (Interrupt : Interrupt_ID;

         Static    : Boolean)

      is

         Old_Handler : Parameterless_Handler;

      begin

         if User_Entry (Interrupt).T /= Null_Task then

            --  If an interrupt entry is installed raise

            --  Program_Error. (propagate it to the caller).

            raise Program_Error with

              "An interrupt entry is already installed";