OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [gcc/] [config/] [c6x/] [c6x.h] - Blame information for rev 710

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 709 jeremybenn
/* Target Definitions for TI C6X.
2
   Copyright (C) 2010, 2011 Free Software Foundation, Inc.
3
   Contributed by Andrew Jenner <andrew@codesourcery.com>
4
   Contributed by Bernd Schmidt <bernds@codesourcery.com>
5
 
6
   This file is part of GCC.
7
 
8
   GCC is free software; you can redistribute it and/or modify it
9
   under the terms of the GNU General Public License as published
10
   by the Free Software Foundation; either version 3, or (at your
11
   option) any later version.
12
 
13
   GCC is distributed in the hope that it will be useful, but WITHOUT
14
   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
15
   or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
16
   License for more details.
17
 
18
   You should have received a copy of the GNU General Public License
19
   along with GCC; see the file COPYING3.  If not see
20
   <http://www.gnu.org/licenses/>.  */
21
 
22
#ifndef GCC_C6X_H
23
#define GCC_C6X_H
24
 
25
/* Feature bit definitions that enable specific insns.  */
26
#define C6X_INSNS_C62X          1
27
#define C6X_INSNS_C64X          2
28
#define C6X_INSNS_C64XP         4
29
#define C6X_INSNS_C67X          8
30
#define C6X_INSNS_C67XP         16
31
#define C6X_INSNS_C674X         32
32
#define C6X_INSNS_ATOMIC        64
33
#define C6X_INSNS_ALL_CPU_BITS  127
34
 
35
#define C6X_DEFAULT_INSN_MASK                                           \
36
  (C6X_INSNS_C62X | C6X_INSNS_C64X | C6X_INSNS_C64XP)
37
 
38
/* A mask of allowed insn types, as defined above.  */
39
extern unsigned long c6x_insn_mask;
40
 
41
/* Value of -march= */
42
extern c6x_cpu_t c6x_arch;
43
#define C6X_DEFAULT_ARCH C6X_CPU_C64XP
44
 
45
/* True if the target has C64x instructions.  */
46
#define TARGET_INSNS_64         ((c6x_insn_mask & C6X_INSNS_C64X) != 0)
47
/* True if the target has C64x+ instructions.  */
48
#define TARGET_INSNS_64PLUS     ((c6x_insn_mask & C6X_INSNS_C64XP) != 0)
49
/* True if the target has C67x instructions.  */
50
#define TARGET_INSNS_67         ((c6x_insn_mask & C6X_INSNS_C67X) != 0)
51
/* True if the target has C67x+ instructions.  */
52
#define TARGET_INSNS_67PLUS     ((c6x_insn_mask & C6X_INSNS_C67XP) != 0)
53
 
54
/* True if the target supports doubleword loads.  */
55
#define TARGET_LDDW             (TARGET_INSNS_64 || TARGET_INSNS_67)
56
/* True if the target supports doubleword loads.  */
57
#define TARGET_STDW             TARGET_INSNS_64
58
/* True if the target supports the MPY32 family of instructions.  */
59
#define TARGET_MPY32            TARGET_INSNS_64PLUS
60
/* True if the target has floating point hardware.  */
61
#define TARGET_FP               TARGET_INSNS_67
62
/* True if the target has C67x+ floating point extensions.  */
63
#define TARGET_FP_EXT           TARGET_INSNS_67PLUS
64
 
65
#define TARGET_DEFAULT 0
66
 
67
/* Run-time Target.  */
68
 
69
#define TARGET_CPU_CPP_BUILTINS()               \
70
  do                                            \
71
    {                                           \
72
      builtin_assert ("machine=tic6x");         \
73
      builtin_assert ("cpu=tic6x");             \
74
      builtin_define ("__TMS320C6X__");         \
75
      builtin_define ("_TMS320C6X");            \
76
                                                \
77
      if (TARGET_DSBT)                          \
78
        builtin_define ("__DSBT__");            \
79
                                                \
80
      if (TARGET_BIG_ENDIAN)                    \
81
        builtin_define ("_BIG_ENDIAN");         \
82
      else                                      \
83
        builtin_define ("_LITTLE_ENDIAN");      \
84
                                                \
85
      switch (c6x_arch)                         \
86
        {                                       \
87
        case C6X_CPU_C62X:                      \
88
          builtin_define ("_TMS320C6200");      \
89
          break;                                \
90
                                                \
91
        case C6X_CPU_C64XP:                     \
92
          builtin_define ("_TMS320C6400_PLUS"); \
93
          /* ... fall through ... */            \
94
        case C6X_CPU_C64X:                      \
95
          builtin_define ("_TMS320C6400");      \
96
          break;                                \
97
                                                \
98
        case C6X_CPU_C67XP:                     \
99
          builtin_define ("_TMS320C6700_PLUS"); \
100
          /* ... fall through ... */            \
101
        case C6X_CPU_C67X:                      \
102
          builtin_define ("_TMS320C6700");      \
103
          break;                                \
104
                                                \
105
        case C6X_CPU_C674X:                     \
106
          builtin_define ("_TMS320C6740");      \
107
          builtin_define ("_TMS320C6700_PLUS"); \
108
          builtin_define ("_TMS320C6700");      \
109
          builtin_define ("_TMS320C6400_PLUS"); \
110
          builtin_define ("_TMS320C6400");      \
111
          break;                                \
112
        }                                       \
113
    } while (0)
114
 
115
#define OPTION_DEFAULT_SPECS \
116
  {"arch", "%{!march=*:-march=%(VALUE)}" }
117
 
118
/* Storage Layout.  */
119
 
120
#define BITS_BIG_ENDIAN 0
121
#define BYTES_BIG_ENDIAN (TARGET_BIG_ENDIAN != 0)
122
#define WORDS_BIG_ENDIAN (TARGET_BIG_ENDIAN != 0)
123
 
124
#define REG_WORDS_BIG_ENDIAN 0
125
 
126
#define UNITS_PER_WORD 4
127
#define PARM_BOUNDARY 8
128
#define STACK_BOUNDARY 64
129
#define FUNCTION_BOUNDARY 32
130
#define BIGGEST_ALIGNMENT 64
131
#define STRICT_ALIGNMENT 1
132
 
133
/* The ABI requires static arrays must be at least 8 byte aligned.
134
   Really only externally visible arrays must be aligned this way, as
135
   only those are directly visible from another compilation unit.  But
136
   we don't have that information available here.  */
137
#define DATA_ALIGNMENT(TYPE, ALIGN)                                     \
138
  (((ALIGN) < BITS_PER_UNIT * 8 && TREE_CODE (TYPE) == ARRAY_TYPE)      \
139
   ? BITS_PER_UNIT * 8 : (ALIGN))
140
 
141
/* Type Layout.  */
142
 
143
#define DEFAULT_SIGNED_CHAR 1
144
 
145
#undef SIZE_TYPE
146
#define SIZE_TYPE "unsigned int"
147
#undef PTRDIFF_TYPE
148
#define PTRDIFF_TYPE "int"
149
 
150
/* Registers.  */
151
 
152
#define FIRST_PSEUDO_REGISTER 67
153
#define FIXED_REGISTERS                                 \
154
  { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,     \
155
    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,     \
156
    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1,   \
157
    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,     \
158
    1, 1, 1}
159
#define CALL_USED_REGISTERS                             \
160
  { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0,   \
161
    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,     \
162
    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, \
163
    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,     \
164
    1, 1, 1}
165
 
166
/* This lists call-used non-predicate registers first, followed by call-used
167
   registers, followed by predicate registers.  We want to avoid allocating
168
   the predicate registers for other uses as much as possible.  */
169
#define REG_ALLOC_ORDER                                                 \
170
  {                                                                     \
171
    REG_A0, REG_A3, REG_A4, REG_A5, REG_A6, REG_A7, REG_A8, REG_A9,     \
172
    REG_A16, REG_A17, REG_A18, REG_A19, REG_A20, REG_A21, REG_A22, REG_A23, \
173
    REG_A24, REG_A25, REG_A26, REG_A27, REG_A28, REG_A29, REG_A30, REG_A31, \
174
    REG_B4, REG_B5, REG_B6, REG_B7, REG_B8, REG_B9, REG_B16,    \
175
    REG_B17, REG_B18, REG_B19, REG_B20, REG_B21, REG_B22, REG_B23, REG_B24, \
176
    REG_B25, REG_B26, REG_B27, REG_B28, REG_B29, REG_B30, REG_B31,      \
177
    REG_A10, REG_A11, REG_A12, REG_A13, REG_A14, REG_A15,               \
178
    REG_B3, REG_B10, REG_B11, REG_B12, REG_B13, REG_B14, REG_B15,       \
179
    REG_A1, REG_A2, REG_B0, REG_B1, REG_B2, REG_ILC                     \
180
  }
181
 
182
#define HARD_REGNO_NREGS(regno, mode)           \
183
  ((GET_MODE_SIZE (mode) + UNITS_PER_WORD - 1)  \
184
   / UNITS_PER_WORD)
185
 
186
#define HARD_REGNO_MODE_OK(reg, mode) (GET_MODE_SIZE (mode) <= UNITS_PER_WORD \
187
                                       ? 1 : ((reg) & 1) == 0)
188
 
189
#define MODES_TIEABLE_P(mode1, mode2)          \
190
  ((mode1) == (mode2) ||                       \
191
   (GET_MODE_SIZE (mode1) <= UNITS_PER_WORD && \
192
    GET_MODE_SIZE (mode2) <= UNITS_PER_WORD))
193
 
194
 
195
/* Register Classes.  */
196
 
197
enum reg_class
198
  {
199
    NO_REGS,
200
    PREDICATE_A_REGS,
201
    PREDICATE_B_REGS,
202
    PREDICATE_REGS,
203
    PICREG,
204
    SPREG,
205
    CALL_USED_B_REGS,
206
    NONPREDICATE_A_REGS,
207
    NONPREDICATE_B_REGS,
208
    NONPREDICATE_REGS,
209
    A_REGS,
210
    B_REGS,
211
    GENERAL_REGS,
212
    ALL_REGS,
213
    LIM_REG_CLASSES
214
  };
215
 
216
#define N_REG_CLASSES (int) LIM_REG_CLASSES
217
 
218
#define REG_CLASS_NAMES {         \
219
    "NO_REGS",                    \
220
    "PREDICATE_A_REGS",           \
221
    "PREDICATE_B_REGS",           \
222
    "PREDICATE_REGS",             \
223
    "PICREG",                     \
224
    "SPREG",                      \
225
    "CALL_USED_B_REGS",           \
226
    "NONPREDICATE_A_REGS",        \
227
    "NONPREDICATE_B_REGS",        \
228
    "NONPREDICATE_REGS",          \
229
    "A_REGS",                     \
230
    "B_REGS",                     \
231
    "GENERAL_REGS",               \
232
    "ALL_REGS" }
233
 
234
#define REG_CLASS_CONTENTS                      \
235
{                                               \
236
  /* NO_REGS.  */                               \
237
  { 0x00000000, 0x00000000, 0 },         \
238
  /* PREDICATE_A_REGS.  */                      \
239
  { 0x00000006, 0x00000000, 0 },         \
240
  /* PREDICATE_B_REGS.  */                      \
241
  { 0x00000000, 0x00000007, 0 },         \
242
  /* PREDICATE_REGS.  */                        \
243
  { 0x00000006, 0x00000007, 0 },         \
244
  /* PICREG.  */                                \
245
  { 0x00000000, 0x00004000, 0 },         \
246
  /* SPREG.  */                                 \
247
  { 0x00000000, 0x00008000, 0 },         \
248
  /* CALL_USED_B_REGS.  */                      \
249
  { 0x00000000, 0xFFFF03FF, 0 },         \
250
  /* NONPREDICATE_A_REGS.  */                   \
251
  { 0xFFFFFFF9, 0x00000000, 0 },         \
252
  /* NONPREDICATE_B_REGS.  */                   \
253
  { 0x00000000, 0xFFFFFFF8, 0 },         \
254
  /* NONPREDICATE_REGS.  */                     \
255
  { 0xFFFFFFF9, 0xFFFFFFF8, 0 },         \
256
  /* A_REGS.  */                                \
257
  { 0xFFFFFFFF, 0x00000000, 3 },                \
258
  /* B_REGS.  */                                \
259
  { 0x00000000, 0xFFFFFFFF, 3 },                \
260
  /* GENERAL_REGS.  */                          \
261
  { 0xFFFFFFFF, 0xFFFFFFFF, 3 },                \
262
  /* ALL_REGS.  */                              \
263
  { 0xFFFFFFFF, 0xFFFFFFFF, 7 },                \
264
}
265
 
266
#define A_REGNO_P(N) ((N) <= REG_A31)
267
#define B_REGNO_P(N) ((N) >= REG_B0 && (N) <= REG_B31)
268
 
269
#define A_REG_P(X) (REG_P (X) && A_REGNO_P (REGNO (X)))
270
#define CROSS_OPERANDS(X0,X1) \
271
  (A_REG_P (X0) == A_REG_P (X1) ? CROSS_N : CROSS_Y)
272
 
273
#define REGNO_REG_CLASS(reg) \
274
    ((reg) >= REG_A1 && (reg) <= REG_A2 ? PREDICATE_A_REGS      \
275
     : (reg) == REG_A0 && TARGET_INSNS_64 ? PREDICATE_A_REGS    \
276
     : (reg) >= REG_B0 && (reg) <= REG_B2 ? PREDICATE_B_REGS    \
277
     : A_REGNO_P (reg) ? NONPREDICATE_A_REGS                    \
278
     : call_used_regs[reg] ? CALL_USED_B_REGS : B_REGS)
279
 
280
#define BASE_REG_CLASS ALL_REGS
281
#define INDEX_REG_CLASS ALL_REGS
282
 
283
#define REGNO_OK_FOR_BASE_STRICT_P(X)                           \
284
  ((X) < FIRST_PSEUDO_REGISTER                                  \
285
   || (reg_renumber[X] >= 0 && reg_renumber[X] < FIRST_PSEUDO_REGISTER))
286
#define REGNO_OK_FOR_BASE_NONSTRICT_P(X) 1
287
 
288
#define REGNO_OK_FOR_INDEX_STRICT_P(X)                          \
289
  ((X) < FIRST_PSEUDO_REGISTER                                  \
290
   || (reg_renumber[X] >= 0 && reg_renumber[X] < FIRST_PSEUDO_REGISTER))
291
#define REGNO_OK_FOR_INDEX_NONSTRICT_P(X) 1
292
 
293
#ifdef REG_OK_STRICT
294
#define REGNO_OK_FOR_BASE_P(X) REGNO_OK_FOR_BASE_STRICT_P (X)
295
#define REGNO_OK_FOR_INDEX_P(X) REGNO_OK_FOR_INDEX_STRICT_P (X)
296
#else
297
#define REGNO_OK_FOR_BASE_P(X) REGNO_OK_FOR_BASE_NONSTRICT_P (X)
298
#define REGNO_OK_FOR_INDEX_P(X) REGNO_OK_FOR_INDEX_NONSTRICT_P (X)
299
#endif
300
 
301
#define CLASS_MAX_NREGS(class, mode) \
302
  ((GET_MODE_SIZE (mode) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)
303
 
304
#define REGNO_OK_FOR_INDIRECT_JUMP_P(REGNO, MODE) B_REGNO_P (REGNO)
305
 
306
/* Stack and Calling.  */
307
 
308
/* SP points to 4 bytes below the first word of the frame.  */
309
#define STACK_POINTER_OFFSET 4
310
/* Likewise for AP (which is the incoming stack pointer).  */
311
#define FIRST_PARM_OFFSET(fundecl) 4
312
#define STARTING_FRAME_OFFSET 0
313
#define FRAME_GROWS_DOWNWARD 1
314
#define STACK_GROWS_DOWNWARD
315
 
316
#define STACK_POINTER_REGNUM REG_B15
317
#define HARD_FRAME_POINTER_REGNUM REG_A15
318
/* These two always get eliminated in favour of the stack pointer
319
   or the hard frame pointer.  */
320
#define FRAME_POINTER_REGNUM REG_FRAME
321
#define ARG_POINTER_REGNUM REG_ARGP
322
 
323
#define PIC_OFFSET_TABLE_REGNUM REG_B14
324
 
325
/* We keep the stack pointer constant rather than using push/pop
326
   instructions.  */
327
#define ACCUMULATE_OUTGOING_ARGS 1
328
 
329
/* Before the prologue, the return address is in the B3 register.  */
330
#define RETURN_ADDR_REGNO REG_B3
331
#define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (Pmode, RETURN_ADDR_REGNO)
332
#define DWARF_FRAME_RETURN_COLUMN       DWARF_FRAME_REGNUM (RETURN_ADDR_REGNO)
333
 
334
#define RETURN_ADDR_RTX(COUNT, FRAME) c6x_return_addr_rtx (COUNT)
335
 
336
#define INCOMING_FRAME_SP_OFFSET 0
337
#define ARG_POINTER_CFA_OFFSET(fundecl) 0
338
 
339
#define STATIC_CHAIN_REGNUM REG_A2
340
 
341
struct c6x_args {
342
  /* Number of arguments to pass in registers.  */
343
  int nregs;
344
  /* Number of arguments passed in registers so far.  */
345
  int count;
346
};
347
 
348
#define CUMULATIVE_ARGS struct c6x_args
349
 
350
#define INIT_CUMULATIVE_ARGS(cum, fntype, libname, fndecl, n_named_args) \
351
  c6x_init_cumulative_args (&cum, fntype, libname, n_named_args)
352
 
353
#define BLOCK_REG_PADDING(MODE, TYPE, FIRST) \
354
  (c6x_block_reg_pad_upward (MODE, TYPE, FIRST) ? upward : downward)
355
 
356
#define FUNCTION_ARG_REGNO_P(r) \
357
    (((r) >= REG_A4 && (r) <= REG_A13) || ((r) >= REG_B4 && (r) <= REG_B13))
358
 
359
#define DEFAULT_PCC_STRUCT_RETURN 0
360
 
361
#define FUNCTION_PROFILER(file, labelno) \
362
  fatal_error ("profiling is not yet implemented for this architecture")
363
 
364
 
365
/* Trampolines.  */
366
#define TRAMPOLINE_SIZE 32
367
#define TRAMPOLINE_ALIGNMENT 256
368
 
369
#define ELIMINABLE_REGS                                 \
370
{{ ARG_POINTER_REGNUM, STACK_POINTER_REGNUM},           \
371
 { ARG_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM},      \
372
 { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM},         \
373
 { FRAME_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}}    \
374
 
375
/* Define the offset between two registers, one to be eliminated, and the other
376
   its replacement, at the start of a routine.  */
377
 
378
#define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
379
  ((OFFSET) = c6x_initial_elimination_offset ((FROM), (TO)))
380
 
381
/* Addressing Modes.  */
382
 
383
#define CONSTANT_ADDRESS_P(x) (CONSTANT_P(x) && GET_CODE(x) != CONST_DOUBLE)
384
#define MAX_REGS_PER_ADDRESS 2
385
 
386
#define HAVE_PRE_DECREMENT 1
387
#define HAVE_POST_DECREMENT 1
388
#define HAVE_PRE_INCREMENT 1
389
#define HAVE_POST_INCREMENT 1
390
 
391
/* Register forms are available, but due to scaling we currently don't
392
   support them.  */
393
#define HAVE_PRE_MODIFY_DISP 1
394
#define HAVE_POST_MODIFY_DISP 1
395
 
396
#define LEGITIMATE_PIC_OPERAND_P(X) \
397
  (!symbolic_operand (X, SImode))
398
 
399
struct GTY(()) machine_function
400
{
401
  /* True if we expanded a sibling call.  */
402
  int contains_sibcall;
403
};
404
 
405
/* Costs.  */
406
#define NO_FUNCTION_CSE 1
407
 
408
#define SLOW_BYTE_ACCESS 0
409
 
410
#define BRANCH_COST(speed_p, predictable_p) 6
411
 
412
 
413
/* Model costs for the vectorizer.  */
414
 
415
/* Cost of conditional branch.  */
416
#ifndef TARG_COND_BRANCH_COST
417
#define TARG_COND_BRANCH_COST        6
418
#endif
419
 
420
/* Cost of any scalar operation, excluding load and store.  */
421
#ifndef TARG_SCALAR_STMT_COST
422
#define TARG_SCALAR_STMT_COST        1
423
#endif
424
 
425
/* Cost of scalar load. */
426
#undef TARG_SCALAR_LOAD_COST
427
#define TARG_SCALAR_LOAD_COST        2 /* load + rotate */
428
 
429
/* Cost of scalar store.  */
430
#undef TARG_SCALAR_STORE_COST
431
#define TARG_SCALAR_STORE_COST       10
432
 
433
/* Cost of any vector operation, excluding load, store,
434
   or vector to scalar operation.  */
435
#undef TARG_VEC_STMT_COST
436
#define TARG_VEC_STMT_COST           1
437
 
438
/* Cost of vector to scalar operation.  */
439
#undef TARG_VEC_TO_SCALAR_COST
440
#define TARG_VEC_TO_SCALAR_COST      1
441
 
442
/* Cost of scalar to vector operation.  */
443
#undef TARG_SCALAR_TO_VEC_COST
444
#define TARG_SCALAR_TO_VEC_COST      1
445
 
446
/* Cost of aligned vector load.  */
447
#undef TARG_VEC_LOAD_COST
448
#define TARG_VEC_LOAD_COST           1
449
 
450
/* Cost of misaligned vector load.  */
451
#undef TARG_VEC_UNALIGNED_LOAD_COST
452
#define TARG_VEC_UNALIGNED_LOAD_COST 2
453
 
454
/* Cost of vector store.  */
455
#undef TARG_VEC_STORE_COST
456
#define TARG_VEC_STORE_COST          1
457
 
458
/* Cost of vector permutation.  */
459
#ifndef TARG_VEC_PERMUTE_COST
460
#define TARG_VEC_PERMUTE_COST        1
461
#endif
462
 
463
/* ttype entries (the only interesting data references used) are
464
   sb-relative got-indirect (aka .ehtype).  */
465
#define ASM_PREFERRED_EH_DATA_FORMAT(code, data) \
466
  (((code) == 0 && (data) == 1) ? (DW_EH_PE_datarel | DW_EH_PE_indirect) \
467
                                : DW_EH_PE_absptr)
468
 
469
/* This should be the same as the definition in elfos.h, plus the call
470
   to output special unwinding directives.  */
471
#undef ASM_DECLARE_FUNCTION_NAME
472
#define ASM_DECLARE_FUNCTION_NAME(FILE, NAME, DECL)             \
473
  do                                                            \
474
    {                                                           \
475
      c6x_output_file_unwind (FILE);                            \
476
      ASM_OUTPUT_TYPE_DIRECTIVE (FILE, NAME, "function");       \
477
      ASM_DECLARE_RESULT (FILE, DECL_RESULT (DECL));            \
478
      ASM_OUTPUT_LABEL (FILE, NAME);                            \
479
    }                                                           \
480
  while (0)
481
 
482
/* This should be the same as the definition in elfos.h, plus the call
483
   to output special unwinding directives.  */
484
#undef ASM_DECLARE_FUNCTION_SIZE
485
#define ASM_DECLARE_FUNCTION_SIZE(STREAM, NAME, DECL) \
486
  c6x_function_end (STREAM, NAME)
487
 
488
/* Arbitrarily choose A4/A5.  */
489
#define EH_RETURN_DATA_REGNO(N) (((N) < 2) ? (N) + 4 : INVALID_REGNUM)
490
 
491
/* The register that holds the return address in exception handlers.  */
492
#define C6X_EH_STACKADJ_REGNUM  3
493
#define EH_RETURN_STACKADJ_RTX  gen_rtx_REG (SImode, C6X_EH_STACKADJ_REGNUM)
494
 
495
 
496
/* Assembler Format.  */
497
 
498
#define DWARF2_ASM_LINE_DEBUG_INFO 1
499
 
500
#undef ASM_APP_ON
501
#define ASM_APP_ON "\t; #APP \n"
502
#undef ASM_APP_OFF
503
#define ASM_APP_OFF "\t; #NO_APP \n"
504
 
505
#define ASM_OUTPUT_COMMON(stream, name, size, rounded)
506
#define ASM_OUTPUT_LOCAL(stream, name, size, rounded)
507
 
508
#define GLOBAL_ASM_OP "\t.global\t"
509
 
510
#define REGISTER_NAMES                                          \
511
  {                                                             \
512
    "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7",             \
513
    "A8", "A9", "A10", "A11", "A12", "A13", "A14", "A15",       \
514
    "A16", "A17", "A18", "A19", "A20", "A21", "A22", "A23",     \
515
    "A24", "A25", "A26", "A27", "A28", "A29", "A30", "A31",     \
516
    "B0", "B1", "B2", "B3", "B4", "B5", "B6", "B7",             \
517
    "B8", "B9", "B10", "B11", "B12", "B13", "B14", "B15",       \
518
    "B16", "B17", "B18", "B19", "B20", "B21", "B22", "B23",     \
519
    "B24", "B25", "B26", "B27", "B28", "B29", "B30", "B31",     \
520
    "FP", "ARGP", "ILC" }
521
 
522
#define DBX_REGISTER_NUMBER(N) (dbx_register_map[(N)])
523
 
524
extern int const dbx_register_map[FIRST_PSEUDO_REGISTER];
525
 
526
#define FINAL_PRESCAN_INSN c6x_final_prescan_insn
527
 
528
#define TEXT_SECTION_ASM_OP ".text;"
529
#define DATA_SECTION_ASM_OP ".data;"
530
 
531
#define ASM_OUTPUT_ALIGN(stream, power)                     \
532
  do                                                        \
533
    {                                                       \
534
      if (power)                                            \
535
        fprintf ((stream), "\t.align\t%d\n", power);        \
536
    }                                                       \
537
  while (0)
538
 
539
#define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE)            \
540
do { char __buf[256];                                   \
541
     fprintf (FILE, "\t.long\t");                               \
542
     ASM_GENERATE_INTERNAL_LABEL (__buf, "L", VALUE);   \
543
     assemble_name (FILE, __buf);                       \
544
     fputc ('\n', FILE);                                \
545
   } while (0)
546
 
547
/* Determine whether to place EXP (an expression or a decl) should be
548
   placed into one of the small data sections.  */
549
#define PLACE_IN_SDATA_P(EXP) \
550
  (c6x_sdata_mode == C6X_SDATA_NONE ? false     \
551
   : c6x_sdata_mode == C6X_SDATA_ALL ? true     \
552
   : !AGGREGATE_TYPE_P (TREE_TYPE (EXP)))
553
 
554
#define SCOMMON_ASM_OP "\t.scomm\t"
555
 
556
#undef  ASM_OUTPUT_ALIGNED_DECL_COMMON
557
#define ASM_OUTPUT_ALIGNED_DECL_COMMON(FILE, DECL, NAME, SIZE, ALIGN)   \
558
  do                                                                    \
559
    {                                                                   \
560
      if (DECL != NULL && PLACE_IN_SDATA_P (DECL))                      \
561
        fprintf ((FILE), "%s", SCOMMON_ASM_OP);                         \
562
      else                                                              \
563
        fprintf ((FILE), "%s", COMMON_ASM_OP);                          \
564
      assemble_name ((FILE), (NAME));                                   \
565
      fprintf ((FILE), ",%u,%u\n", (int)(SIZE), (ALIGN) / BITS_PER_UNIT);\
566
    }                                                                   \
567
  while (0)
568
 
569
/* This says how to output assembler code to declare an
570
   uninitialized internal linkage data object.  */
571
 
572
#undef  ASM_OUTPUT_ALIGNED_DECL_LOCAL
573
#define ASM_OUTPUT_ALIGNED_DECL_LOCAL(FILE, DECL, NAME, SIZE, ALIGN)    \
574
do {                                                                    \
575
  if (PLACE_IN_SDATA_P (DECL))                                          \
576
    switch_to_section (sbss_section);                                   \
577
  else                                                                  \
578
    switch_to_section (bss_section);                                    \
579
  ASM_OUTPUT_TYPE_DIRECTIVE (FILE, NAME, "object");                     \
580
  if (!flag_inhibit_size_directive)                                     \
581
    ASM_OUTPUT_SIZE_DIRECTIVE (FILE, NAME, SIZE);                       \
582
  ASM_OUTPUT_ALIGN ((FILE), exact_log2((ALIGN) / BITS_PER_UNIT));       \
583
  ASM_OUTPUT_LABEL(FILE, NAME);                                         \
584
  ASM_OUTPUT_SKIP((FILE), (SIZE) ? (SIZE) : 1);                         \
585
} while (0)
586
 
587
#define CASE_VECTOR_PC_RELATIVE flag_pic
588
#define JUMP_TABLES_IN_TEXT_SECTION flag_pic
589
 
590
#define ADDR_VEC_ALIGN(VEC) (JUMP_TABLES_IN_TEXT_SECTION ? 5 : 2)
591
 
592
/* This is how to output an element of a case-vector that is relative.  */
593
#define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \
594
  do { char buf[100];                                   \
595
       fputs ("\t.long ", FILE);                        \
596
       ASM_GENERATE_INTERNAL_LABEL (buf, "L", VALUE);   \
597
       assemble_name (FILE, buf);                       \
598
       putc ('-', FILE);                                \
599
       ASM_GENERATE_INTERNAL_LABEL (buf, "L", REL);     \
600
       assemble_name (FILE, buf);                       \
601
       putc ('\n', FILE);                               \
602
     } while (0)
603
 
604
/* Misc.  */
605
 
606
#define CASE_VECTOR_MODE SImode
607
#define MOVE_MAX 4
608
#define MOVE_RATIO(SPEED) 4
609
#define TRULY_NOOP_TRUNCATION(outprec, inprec) 1
610
#define CLZ_DEFINED_VALUE_AT_ZERO(MODE, VALUE) ((VALUE) = 32, 1)
611
#define Pmode SImode
612
#define FUNCTION_MODE QImode
613
 
614
#define CPU_UNITS_QUERY 1
615
 
616
extern int c6x_initial_flag_pic;
617
 
618
#endif /* GCC_C6X_H */

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.