URL https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [gcc/] [config/] [epiphany/] [epiphany.md] - Blame information for rev 713

Go to most recent revision | Details | Compare with Previous | View Log

;; Machine description of the Adaptiva epiphany cpu for GNU C compiler
;; Copyright (C) 1994, 1997, 1998, 1999, 2000, 2004, 2005, 2007, 2009, 2010,
;; 2011 Free Software Foundation, Inc.
;; Contributed by Embecosm on behalf of Adapteva, Inc.
 
;; This file is part of GCC.
 
;; GCC is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 3, or (at your option)
;; any later version.
 
;; GCC is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.
 
;; You should have received a copy of the GNU General Public License
;; along with GCC; see the file COPYING3.  If not see
;; .
 
;; See file "rtl.def" for documentation on define_insn, match_*, et. al.
 
(define_constants
  [(GPR_0                        0)
   (GPR_FP                      11)
   (GPR_IP                      12)
   (GPR_SP                      13)
   (GPR_LR                      14)
   (GPR_16                      16)
   (GPR_18                      18)
   (GPR_20                      20)
   (ARG_POINTER_REGNUM          64)
   (FRAME_POINTER_REGNUM        65)
   (CC_REGNUM                   66)   ;; 66 or 17
   (CCFP_REGNUM                 67)   ;; 67 or 18
   (CONFIG_REGNUM               68)
   (STATUS_REGNUM               69)
   (LC_REGNUM                   70)
   (LS_REGNUM                   71)
   (LE_REGNUM                   72)
   (IRET_REGNUM                 73)
   (FP_NEAREST_REGNUM           74)
   (FP_TRUNCATE_REGNUM          75)
   (FP_ANYFP_REGNUM             76)
   (UNKNOWN_REGNUM              77) ; used for addsi3_r and friends
   ; We represent the return address as an unspec rather than a reg.
   ; If we used a reg, we could use register elimination, but eliminating
   ; to GPR_LR would make the latter visible to dataflow, thus making it
   ; harder to determine when it must be saved.
   (UNSPEC_RETURN_ADDR           0)
   (UNSPEC_FP_MODE               1)
 
   (UNSPECV_GID                  0)
   (UNSPECV_GIE                  1)])
 
;; Insn type.  Used to default other attribute values.
 
(define_attr "type"
  "move,load,store,cmove,unary,compare,shift,mul,uncond_branch,branch,call,fp,fp_int,misc,sfunc,fp_sfunc,flow"
  (const_string "misc"))
 
;; Length (in # bytes)
 
(define_attr "length" "" (const_int 4))
 
;; The length here is the length of a single asm.
 
(define_asm_attributes
  [(set_attr "length" "4")
   (set_attr "type" "misc")])
 
;; pipeline model; so far we have only one.
(define_attr "pipe_model" "epiphany" (const_string "epiphany"))
 
(define_attr "rounding" "trunc,nearest"
  (cond [(ne (symbol_ref "TARGET_ROUND_NEAREST") (const_int 0))
         (const_string "nearest")]
        (const_string "trunc")))
 
(define_attr "fp_mode" "round_unknown,round_nearest,round_trunc,int,caller,none"
  (cond [(eq_attr "type" "fp,fp_sfunc")
         (symbol_ref "(enum attr_fp_mode) epiphany_normal_fp_rounding")
         (eq_attr "type" "call")
         (symbol_ref "(enum attr_fp_mode) epiphany_normal_fp_mode")
         (eq_attr "type" "fp_int")
         (const_string "int")]
        (const_string "none")))
 
(include "epiphany-sched.md")
 
(include "predicates.md")
(include "constraints.md")
 
;; modes that are held in a single register, and hence, a word.
(define_mode_iterator WMODE [SI SF HI QI V2HI V4QI])
(define_mode_iterator WMODE2 [SI SF HI QI V2HI V4QI])
 
;; modes that are held in a two single registers
(define_mode_iterator DWMODE [DI DF V2SI V2SF V4HI V8QI])
 
;; Double-word mode made up of two single-word mode values.
(define_mode_iterator DWV2MODE [V2SI V2SF])
(define_mode_attr vmode_part [(V2SI "si") (V2SF "sf")])
(define_mode_attr vmode_PART [(V2SI "SI") (V2SF "SF")])
(define_mode_attr vmode_fp_type [(V2SI "fp_int") (V2SF "fp")])
(define_mode_attr vmode_ccmode [(V2SI "CC") (V2SF "CC_FP")])
(define_mode_attr vmode_cc [(V2SI "CC_REGNUM") (V2SF "CCFP_REGNUM")])
 
;; Move instructions.
 
(define_expand "mov"
  [(set (match_operand:WMODE 0 "general_operand" "")
        (match_operand:WMODE 1 "general_operand" ""))]
  ""
{
  if (mode == V4QImode || mode == V2HImode)
    {
      operands[0] = simplify_gen_subreg (SImode, operands[0], mode, 0);
      operands[1] = simplify_gen_subreg (SImode, operands[1], mode, 0);
      emit_insn (gen_movsi (operands[0], operands[1]));
      DONE;
    }
  if (GET_CODE (operands[0]) == MEM)
    operands[1] = force_reg (mode, operands[1]);
  if (mode == SImode
      && (operands[1] == frame_pointer_rtx || operands[1] == arg_pointer_rtx))
    {
      rtx reg = operands[0];
 
      if (!REG_P (reg))
        reg = gen_reg_rtx (SImode);
      emit_insn (gen_move_frame (reg, operands[1]));
      operands[1] = reg;
      if (operands[0] == reg)
        DONE;
    }
})
 
(define_insn "*movqi_insn"
  [(set (match_operand:QI 0 "move_dest_operand" "=Rcs,   r,  r,r,m")
        (match_operand:QI 1 "move_src_operand"   "Rcs,rU16,Cal,m,r"))]
;; ??? Needed?
  "gpr_operand (operands[0], QImode)
   || gpr_operand (operands[1], QImode)"
  "@
   mov %0,%1
   mov %0,%1
   mov %0,%1
   ldrb %0,%1
   strb %1,%0"
  [(set_attr "type" "move,move,move,load,store")])
 
(define_insn_and_split "*movhi_insn"
  [(set (match_operand:HI 0 "move_dest_operand" "=r,  r,r,m")
        (match_operand:HI 1 "move_src_operand""rU16,Cal,m,r"))]
  "gpr_operand (operands[0], HImode)
   || gpr_operand (operands[1], HImode)"
  "@
   mov %0,%1
   mov %0,%%low(%1); %1
   ldrh %0,%c1
   strh %1,%c0"
  "reload_completed && CONSTANT_P (operands[1])
   && !satisfies_constraint_U16 (operands[1]) && TARGET_SPLIT_LOHI"
  [(set (match_dup 2) (match_dup 3))]
  "operands[2] = simplify_gen_subreg (SImode, operands[0], HImode, 0);
   operands[3] = simplify_gen_subreg (SImode, operands[1], HImode, 0);"
  [(set_attr "type" "move,move,load,store")])
 
;; We use a special pattern for a move from the frame pointer to
;; show the flag clobber that is needed when this move is changed
;; to an add by register elimination.
;; ??? A pseudo register might be equivalent to a function invariant,
;; and thus placed by reload into reg_equiv_invariant; if the pseudo
;; does not get a hard register, we then end up with the function
;; invariant in its place, i.e. an unexpected clobber of the flags
;; register.
;;
;; N.B. operand 1 is an operand so that reload will perform elimination.
;;
;; The post-reload pattern recognition and splitting is done in frame_move_1.
(define_insn "move_frame"
  [(set (match_operand:SI 0 "gpr_operand" "=r")
        (match_operand:SI 1 "register_operand" "r"))
   (clobber (reg:CC CC_REGNUM))]
  "operands[1] == frame_pointer_rtx || operands[1] == arg_pointer_rtx"
  "#")
 
(define_insn "movsi_high"
  [(set (match_operand:SI 0 "gpr_operand" "+r")
        (ior:SI (and:SI (match_dup 0) (const_int 65535))
                (high:SI (match_operand:SI 1 "move_src_operand" "i"))))]
  ""
  "movt %0, %%high(%1)"
  [(set_attr "type" "move")
   (set_attr "length" "4")])
 
(define_insn "movsi_lo_sum"
  [(set (match_operand:SI 0 "gpr_operand" "=r")
        (lo_sum:SI (const_int 0)
                   (match_operand:SI 1 "move_src_operand" "i")))]
  ""
  "mov %0, %%low(%1)"
  [(set_attr "type" "move")
   (set_attr "length" "4")])
 
(define_insn_and_split "*movsi_insn"
  [(set (match_operand:SI 0 "move_dest_operand"
         "=   r,  r,  r,  r,  r,   r,   m,  r,  Rct")
        (match_operand:SI 1 "move_src_operand"
         "rU16Rra,Cm1,Cl1,Cr1,Cal,mSra,rRra,Rct,r"))]
  "gpr_operand (operands[0], SImode)
   || gpr_operand (operands[1], SImode)
   || satisfies_constraint_Sra (operands[1])"
{
  switch (which_alternative)
    {
    case 0: return "mov %0,%1";
    case 1: return "add %0,%-,(1+%1)";
    case 2: operands[1] = GEN_INT (exact_log2 (-INTVAL (operands[1])));
      return "lsl %0,%-,%1";
    case 3: operands[1] = GEN_INT (32 - exact_log2 (INTVAL (operands[1]) + 1));
      return "lsr %0,%-,%1";
    case 4: return "mov %0,%%low(%1)\;movt %0,%%high(%1) ; %1";
    case 5: return "ldr %0,%C1";
    case 6: return "str %1,%C0";
    case 7: return "movfs %0,%1";
    case 8: return "movts %0,%1";
    default: gcc_unreachable ();
    }
}
  "reload_completed && CONSTANT_P (operands[1])
   && !satisfies_constraint_U16 (operands[1])
   && !satisfies_constraint_Cm1 (operands[1])
   && !satisfies_constraint_Cl1 (operands[1])
   && !satisfies_constraint_Cr1 (operands[1])
   && TARGET_SPLIT_LOHI"
  [(match_dup 2) (match_dup 3)]
  "operands[2] = gen_movsi_lo_sum (operands[0], operands[1]);
   operands[3] = gen_movsi_high (operands[0], operands[1]);"
  [(set_attr "type" "move,misc,misc,misc,move,load,store,flow,flow")
   (set_attr "length" "4,4,4,4,8,4,4,4,4")])
 
(define_split
  [(set (match_operand:SI 0 "nonimmediate_operand")
        (unspec:SI [(const_int 0)] UNSPEC_RETURN_ADDR))]
  "reload_completed && !MACHINE_FUNCTION (cfun)->lr_clobbered"
  [(set (match_dup 0) (reg:SI GPR_LR))])
 
(define_split
  [(set (match_operand:SI 0 "gpr_operand")
        (unspec:SI [(const_int 0)] UNSPEC_RETURN_ADDR))]
  "reload_completed"
  [(set (match_dup 0) (match_dup 1))]
{
  emit_insn (gen_reload_insi_ra (operands[0], operands[1]));
  DONE;
})
 
(define_expand "reload_insi_ra"
  [(set (match_operand:SI 0 "gpr_operand" "r") (match_operand:SI 1 "" "Sra"))]
  ""
{
  rtx addr
    = (frame_pointer_needed ? hard_frame_pointer_rtx : stack_pointer_rtx);
 
  addr = plus_constant (addr, MACHINE_FUNCTION (cfun)->lr_slot_offset);
  operands[1] = gen_frame_mem (SImode, addr);
})
 
;; If the frame pointer elimination offset is zero, we'll use this pattern.
;; Note that the splitter can accept any gpr in operands[1]; this is
;; necessary, (e.g. for compile/20021015-1.c -O0,)
;; because when register elimination cannot be done with the constant
;; as an immediate operand of the add instruction, reload will resort to
;; loading the constant into a reload register, using gen_add2_insn to add
;; the stack pointer, and then use the reload register as new source in
;; the move_frame pattern.
(define_insn_and_split "*move_frame_1"
  [(set (match_operand:SI 0 "gpr_operand" "=r")
        (match_operand:SI 1 "gpr_operand" "r"))
   (clobber (reg:CC CC_REGNUM))]
  "(reload_in_progress || reload_completed)
   && (operands[1] == stack_pointer_rtx
       || operands[1] == hard_frame_pointer_rtx)"
  "#"
  "reload_in_progress || reload_completed"
  [(set (match_dup 0) (match_dup 1))])
 
(define_expand "mov"
  [(set (match_operand:DWMODE 0 "general_operand" "")
        (match_operand:DWMODE 1 "general_operand" ""))]
  ""
  "
{
  if (GET_MODE_CLASS (mode) == MODE_VECTOR_INT
      || GET_MODE_CLASS (mode) == MODE_VECTOR_FLOAT)
    {
      if (epiphany_vect_align == 4 && TARGET_SPLIT_VECMOVE_EARLY)
        {
          rtx o0l, o0h, o1l, o1h;
 
          o0l = simplify_gen_subreg (SImode, operands[0], mode, 0);
          o0h = simplify_gen_subreg (SImode, operands[0], mode,
                                     UNITS_PER_WORD);
          o1l = simplify_gen_subreg (SImode, operands[1], mode, 0);
          o1h = simplify_gen_subreg (SImode, operands[1], mode,
                                     UNITS_PER_WORD);
          if (reg_overlap_mentioned_p (o0l, o1h))
            {
              emit_move_insn (o0h, o1h);
              emit_move_insn (o0l, o1l);
            }
          else
            {
              emit_move_insn (o0l, o1l);
              emit_move_insn (o0h, o1h);
            }
          DONE;
        }
      /* lower_subreg has a tendency to muck up vectorized code.
         To protect the wide memory accesses, we must use same-size
         subregs.  */
      if (epiphany_vect_align != 4 /* == 8 */
          && !reload_in_progress
          && (GET_CODE (operands[0]) == MEM || GET_CODE (operands[1]) == MEM)
          && (GET_CODE (operands[0]) != SUBREG
              || (GET_MODE_SIZE (GET_MODE (SUBREG_REG (operands[0])))
                  != GET_MODE_SIZE (mode)
                  && GET_CODE (operands[1]) != SUBREG)))
        {
          operands[0]
            = simplify_gen_subreg (DImode, operands[0], mode, 0);
          operands[1]
            = simplify_gen_subreg (DImode, operands[1], mode, 0);
          emit_insn (gen_movdi (operands[0], operands[1]));
          DONE;
        }
    }
  /* Everything except mem = const or mem = mem can be done easily.  */
 
  if (GET_CODE (operands[0]) == MEM)
    operands[1] = force_reg (mode, operands[1]);
}")
 
(define_insn_and_split "*mov_insn"
  [(set (match_operand:DWMODE 0 "move_dest_operand"      "=r,   r,r,m")
        (match_operand:DWMODE 1 "move_double_src_operand" "r,CalE,m,r"))]
  "(gpr_operand (operands[0], mode)
    || gpr_operand (operands[1], mode))"
  "@
   #
   #
   ldrd %0,%X1
   strd %1,%X0"
  "reload_completed
   && ((!MEM_P (operands[0]) && !MEM_P (operands[1]))
       || epiphany_vect_align == 4)"
  [(set (match_dup 2) (match_dup 3))
   (set (match_dup 4) (match_dup 5))]
{
  int word0 = 0, word1 = UNITS_PER_WORD;
 
  if (post_modify_operand (operands[0], mode)
      || post_modify_operand (operands[1], mode))
    word0 = UNITS_PER_WORD, word1 = 0;
 
  operands[2] = simplify_gen_subreg (SImode, operands[0], mode, word0);
  operands[3] = simplify_gen_subreg (SImode, operands[1], mode, word0);
  operands[4] = simplify_gen_subreg (SImode, operands[0], mode, word1);
  operands[5] = simplify_gen_subreg (SImode, operands[1], mode, word1);
  if (post_modify_operand (operands[0], mode))
    operands[2]
      = change_address (operands[2], VOIDmode,
                        plus_constant (XEXP (XEXP (operands[0], 0), 0),
                                       UNITS_PER_WORD));
  if (post_modify_operand (operands[1], mode))
    operands[3]
      = change_address (operands[3], VOIDmode,
                        plus_constant (XEXP (XEXP (operands[1], 0), 0),
                                       UNITS_PER_WORD));
}
  [(set_attr "type" "move,move,load,store")
   (set_attr "length" "8,16,4,4")])
 
 
(define_insn_and_split "*movsf_insn"
  [(set (match_operand:SF 0 "move_dest_operand" "=r,r,r,m")
        (match_operand:SF 1 "move_src_operand"   "r,E,m,r"))]
  "gpr_operand (operands[0], SFmode)
   || gpr_operand (operands[1], SFmode)"
  "@
   mov %0,%1
   mov %0,%%low(%1)\;movt %0,%%high(%1) ; %1
   ldr %0,%C1
   str %1,%C0"
  "reload_completed && CONSTANT_P (operands[1]) && TARGET_SPLIT_LOHI"
  [(set (match_dup 2) (match_dup 3))]
  "operands[2] = simplify_gen_subreg (SImode, operands[0], SFmode, 0);
   operands[3] = simplify_gen_subreg (SImode, operands[1], SFmode, 0);"
  [(set_attr "type" "move,move,load,store")
   (set_attr "length" "4,8,4,4")])
 
(define_expand "addsi3"
  [(set (match_operand:SI 0 "add_reg_operand" "")
        (plus:SI (match_operand:SI 1 "add_reg_operand" "")
                 (match_operand:SI 2 "add_operand" "")))]
  ""
  "
{
  if (reload_in_progress || reload_completed)
    emit_insn (gen_addsi3_r (operands[0], operands[1], operands[2]));
  else
    emit_insn (gen_addsi3_i (operands[0], operands[1], operands[2]));
  DONE;
}")
 
(define_insn "addsi3_i"
  [(set (match_operand:SI 0 "add_reg_operand" "=r")
        (plus:SI (match_operand:SI 1 "add_reg_operand" "%r")
                 (match_operand:SI 2 "add_operand" "rL")))
   (clobber (reg:CC CC_REGNUM))]
  ""
  "add %0,%1,%2"
[(set_attr "type" "misc")])
 
; We use a clobber of UNKNOWN_REGNUM here so that the peephole optimizers
; can identify the unresolved flags clobber problem, and also to
; avoid unwanted matches.
;
; At -O0 / -O1 we don't peephole all instances away.  We could get better
; debug unwinding through the emitted code if we added a splitter.
(define_insn "addsi3_r"
  [(set (match_operand:SI 0 "gpr_operand" "=r")
        (plus:SI (match_operand:SI 1 "gpr_operand" "%r")
                 (match_operand:SI 2 "nonmemory_operand" "rCar")))
   (clobber (reg:CC UNKNOWN_REGNUM))]
  "reload_in_progress || reload_completed"
{
  int scratch = (0x17
                 ^ (true_regnum (operands[0]) & 1)
                 ^ (true_regnum (operands[1]) & 2)
                 ^ (true_regnum (operands[2]) & 4));
  asm_fprintf (asm_out_file, "\tstr r%d,[sp,#0]\n", scratch);
  asm_fprintf (asm_out_file, "\tmovfs r%d,status\n", scratch);
  output_asm_insn ("add %0,%1,%2", operands);
  asm_fprintf (asm_out_file, "\tmovts status,r%d\n", scratch);
  asm_fprintf (asm_out_file, "\tldr r%d,[sp,#0]\n", scratch);
  return "";
}
  [(set_attr "length" "20")
   (set_attr "type" "misc")])
 
;; reload uses gen_addsi2 because it doesn't understand the need for
;; the clobber.
(define_peephole2
  [(set (match_operand:SI 0 "gpr_operand" "")
        (match_operand:SI 1 "const_int_operand" ""))
   (parallel [(set (match_dup 0)
                   (plus:SI (match_dup 0)
                            (match_operand:SI 2 "gpr_operand")))
              (clobber (reg:CC UNKNOWN_REGNUM))])]
  "satisfies_constraint_L (operands[1])
   || ((operands[2] == stack_pointer_rtx
        || (operands[2] == hard_frame_pointer_rtx && frame_pointer_needed))
       && !peep2_regno_dead_p (2, CC_REGNUM)
       && satisfies_constraint_Car (operands[1]))"
  [(parallel [(set (match_dup 0)
                   (plus:SI (match_dup 2) (match_dup 1)))
              (clobber (reg:CC UNKNOWN_REGNUM))])]
  ;; FIXME:
  ;; need this patch: http://gcc.gnu.org/ml/gcc-patches/2011-10/msg02819.html
  ;; "peep2_rescan = true;"
)
 
(define_peephole2
  [(match_parallel 5 ""
     [(set (match_operand 3 "cc_operand" "") (match_operand 4 "" ""))])
   (parallel [(set (match_operand:SI 0 "gpr_operand" "")
                   (plus:SI (match_operand:SI 1 "gpr_operand" "")
                            (match_operand:SI 2 "nonmemory_operand" "")))
              (clobber (reg:CC UNKNOWN_REGNUM))])]
  "REGNO (operands[3]) == CC_REGNUM
   && (gpr_operand (operands[2], SImode)
       || satisfies_constraint_L (operands[2]))
   && !reg_overlap_mentioned_p (operands[0], operands[5])
   && !reg_set_p (operands[1], operands[5])
   && !reg_set_p (operands[2], operands[5])"
  [(parallel [(set (match_operand:SI 0 "gpr_operand" "")
                   (plus:SI (match_operand:SI 1 "gpr_operand" "")
                            (match_operand:SI 2 "nonmemory_operand" "")))
              (clobber (reg:CC CC_REGNUM))])
   (match_dup 5)]
  "")
 
(define_peephole2
  [(parallel [(set (match_operand:SI 0 "gpr_operand" "")
                   (plus:SI (match_operand:SI 1 "gpr_operand" "")
                            (match_operand:SI 2 "nonmemory_operand" "")))
              (clobber (reg:CC UNKNOWN_REGNUM))])]
  "peep2_regno_dead_p (1, CC_REGNUM)
   && (gpr_operand (operands[2], SImode)
       || satisfies_constraint_L (operands[2]))"
  [(parallel [(set (match_operand:SI 0 "gpr_operand" "")
                   (plus:SI (match_operand:SI 1 "gpr_operand" "")
                            (match_operand:SI 2 "nonmemory_operand" "")))
              (clobber (reg:CC CC_REGNUM))])]
  "")
 
(define_peephole2
  [(parallel [(set (match_operand:SI 0 "gpr_operand" "")
                   (plus:SI (reg:SI GPR_SP)
                            (match_operand:SI 1 "nonmemory_operand" "")))
              (clobber (reg:CC UNKNOWN_REGNUM))])]
  "(REG_P (operands[1]) && !reg_overlap_mentioned_p (operands[0], operands[1]))
   || RTX_OK_FOR_OFFSET_P (mode, operands[1])"
  [(set (match_dup 0) (reg:SI GPR_SP))
   (set (mem:WMODE (post_modify (match_dup 0)
                                (plus:SI (match_dup 0) (match_dup 1))))
        (reg:WMODE GPR_SP))]
  "")
 
 
 
(define_peephole2
  [(parallel [(set (match_operand:SI 0 "gpr_operand" "")
                   (plus:SI (reg:SI GPR_FP)
                            (match_operand:SI 1 "nonmemory_operand" "")))
              (clobber (reg:CC UNKNOWN_REGNUM))])
   (match_scratch:WMODE 2 "r")]
  "frame_pointer_needed
   && ((REG_P (operands[1])
        && !reg_overlap_mentioned_p (operands[0], operands[1]))
       || RTX_OK_FOR_OFFSET_P (mode, operands[1]))"
  [(set (match_dup 0) (reg:SI GPR_FP))
   (set (match_dup 2)
        (mem:WMODE (post_modify (match_dup 0)
                                (plus:SI (match_dup 0) (match_dup 1)))))]
  "")
 
(define_insn "subsi3"
  [(set (match_operand:SI 0 "gpr_operand" "=r")
        (minus:SI (match_operand:SI 1 "add_reg_operand" "r")
                  (match_operand:SI 2 "arith_operand" "rL")))
   (clobber (reg:CC CC_REGNUM))]
  ""
  "sub %0,%1,%2"
  [(set_attr "type" "misc")])
 
; After mode-switching, floating point operations, fp_sfuncs and calls
; must exhibit the use of the control register, lest the setting of the
; control register could be deleted or moved.  OTOH a use of a hard register
; greatly coundounds optimizers like the rtl loop optimizers or combine.
; Therefore, we put an extra pass immediately after the mode switching pass
; that inserts the USEs of the control registers, and sets a flag in struct
; machine_function that float_operation can henceforth only match with that
; USE.
 
;; Addition
(define_expand "addsf3"
  [(parallel
     [(set (match_operand:SF 0 "gpr_operand" "")
           (plus:SF (match_operand:SF 1 "gpr_operand" "")
                    (match_operand:SF 2 "gpr_operand" "")))
      (clobber (reg:CC_FP CCFP_REGNUM))])])
 
(define_insn "*addsf3_i"
  [(match_parallel 3 "float_operation"
     [(set (match_operand:SF 0 "gpr_operand" "=r")
           (plus:SF (match_operand:SF 1 "gpr_operand" "%r")
                    (match_operand:SF 2 "gpr_operand" "r")))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "fadd %0,%1,%2"
  [(set_attr "type" "fp")])
 
;; Subtraction
(define_expand "subsf3"
  [(parallel
     [(set (match_operand:SF 0 "gpr_operand" "")
           (minus:SF (match_operand:SF 1 "gpr_operand" "")
                     (match_operand:SF 2 "gpr_operand" "")))
      (clobber (reg:CC_FP CCFP_REGNUM))])])
 
(define_insn "*subsf3_i"
  [(match_parallel 3 "float_operation"
     [(set (match_operand:SF 0 "gpr_operand" "=r")
           (minus:SF (match_operand:SF 1 "gpr_operand" "r")
                     (match_operand:SF 2 "gpr_operand" "r")))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "fsub %0,%1,%2"
  [(set_attr "type" "fp")])
 
(define_expand "subsf3_f"
  [(parallel
     [(set (reg:CC_FP CCFP_REGNUM)
           (compare:CC_FP (match_operand:SF 1 "gpr_operand" "r")
                          (match_operand:SF 2 "gpr_operand" "r")))
      (set (match_operand:SF 0 "gpr_operand" "=r")
           (minus:SF (match_dup 1) (match_dup 2)))])]
  "!TARGET_SOFT_CMPSF")
 
(define_insn "*subsf3_f_i"
  [(match_parallel 3 "float_operation"
     [(set (reg:CC_FP CCFP_REGNUM)
           (compare:CC_FP (match_operand:SF 1 "gpr_operand" "r")
                          (match_operand:SF 2 "gpr_operand" "r")))
      (set (match_operand:SF 0 "gpr_operand" "=r")
           (minus:SF (match_dup 1) (match_dup 2)))])]
  "!TARGET_SOFT_CMPSF"
  "fsub %0,%1,%2"
  [(set_attr "type" "fp")])
 
; There is an fabs instruction, but it has longer latency.
(define_expand "abssf2"
  [(set (match_operand:SF 0 "gpr_operand" "")
        (abs:SF (match_operand:SF 1 "gpr_operand" "")))]
  ""
  "
{
  rtx op1 = copy_to_mode_reg (SImode, simplify_gen_subreg (SImode, operands[1],
                                                           SFmode, 0));
  rtx op0 = simplify_gen_subreg (SImode, operands[0], SFmode, 0);
 
  emit_insn (gen_ashlsi3 (op1, op1, const1_rtx));
  emit_insn (gen_lshrsi3 (op0, op1, const1_rtx));
  DONE;
}")
 
;; Multiplication
(define_expand "mulsf3"
  [(parallel
     [(set (match_operand:SF 0 "gpr_operand" "")
           (mult:SF (match_operand:SF 1 "gpr_operand" "")
                    (match_operand:SF 2 "gpr_operand" "")))
      (clobber (reg:CC_FP CCFP_REGNUM))])])
 
(define_insn "*mulsf3_i"
  [(match_parallel 3 "float_operation"
     [(set (match_operand:SF 0 "gpr_operand" "=r")
           (mult:SF (match_operand:SF 1 "gpr_operand" "%r")
                    (match_operand:SF 2 "gpr_operand" "r")))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "fmul %0,%1,%2"
  [(set_attr "type" "fp")])
 
;; Division
(define_expand "divsf3"
  [(set (match_operand:SF 0 "gpr_operand" "")
        (div:SF (match_operand:SF 1 "gpr_operand" "")
                (match_operand:SF 2 "gpr_operand" "")))]
  "flag_reciprocal_math"
{
  rtx one = CONST1_RTX (SFmode);
  rtx dst = operands[0];
 
  if (rtx_equal_p (dst, operands[1]))
    {
      emit_move_insn (dst, one);
      DONE;
    }
  else if (!register_operand (dst, SFmode) && can_create_pseudo_p ())
    dst = gen_reg_rtx (SFmode);
  emit_insn (gen_recipsf2 (dst, one, operands[2],
                           sfunc_symbol (\"__fast_recipsf2\")));
  emit_insn (gen_mulsf3 (operands[0], operands[1], dst));
  DONE;
})
 
;; Before reload, keep the hard reg usage to clobbers so that the loop
;; optimizers can more easily move this insn.
;; It would be nicer to use a constraint for a GPR_0 - only register class,
;; but sched1 can still cause trouble then, and there is no guarantee of
;; better register allocations.
;; Neither is there when using the opposite strategy - putting explicit
;; hard register references into pre-reload rtl.
(define_expand "recipsf2"
  [(parallel
     [(set (match_operand:SF 0 "gpr_operand" "")
           (div:SF (match_operand:SF 1 "const_float_1_operand" "")
                   (match_operand:SF 2 "move_src_operand" "")))
      (use (match_operand:SI 3 "move_src_operand" ""))
      (clobber (reg:SF 0))
      (clobber (reg:SI 1))
      (clobber (reg:SF GPR_IP))
      (clobber (reg:DI GPR_16))
      (clobber (reg:DI GPR_18))
      (clobber (reg:SI GPR_20))
      (clobber (reg:SI GPR_LR))
      (clobber (reg:CC CC_REGNUM))
      (clobber (reg:CC_FP CCFP_REGNUM))])])
 
(define_insn_and_split "*recipsf2_1"
  [(match_parallel 4 "float_operation"
     [(set (match_operand:SF 0 "gpr_operand" "=r,r")
           (div:SF (match_operand:SF 1 "const_float_1_operand" "")
                   (match_operand:SF 2 "move_src_operand" "rU16m,rU16mCal")))
      (use (match_operand:SI 3 "move_src_operand" "rU16m,rU16mCal"))
      (clobber (reg:SF 0))
      (clobber (reg:SI 1))
      (clobber (reg:SF GPR_IP))
      (clobber (reg:DI GPR_16))
      (clobber (reg:DI GPR_18))
      (clobber (reg:SI GPR_20))
      (clobber (reg:SI GPR_LR))
      (clobber (reg:CC CC_REGNUM))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  "flag_reciprocal_math"
  "#"
  "&& reload_completed"
  [(set (reg:SI 1) (match_dup 3))
   (set (reg:SF 0) (match_dup 2))
   (parallel
     [(set (reg:SF 0)
           (div:SF (match_dup 1)
                   (reg:SF 0)))
      (use (reg:SI 1))
      (clobber (reg:SI GPR_IP))
      (clobber (reg:DI GPR_16))
      (clobber (reg:DI GPR_18))
      (clobber (reg:SI GPR_20))
      (clobber (reg:SI GPR_LR))
      (clobber (reg:CC CC_REGNUM))
      (clobber (reg:CC_FP CCFP_REGNUM))
      (match_dup 5)
      (match_dup 6)])
   (set (match_dup 0) (reg:SF 0))]
  "operands[5] = XVECEXP (operands[4], 0, XVECLEN (operands[4], 0) - 2);
   operands[6] = XVECEXP (operands[4], 0, XVECLEN (operands[4], 0) - 1);"
  [(set_attr "type" "fp_sfunc")
   (set_attr "length" "16,24")])
 
(define_insn "*recipsf2_2"
  [(match_parallel 1 "float_operation"
     [(set (reg:SF 0)
           (div:SF (match_operand:SF 0 "const_float_1_operand" "")
                   (reg:SF 0)))
      (use (reg:SI 1))
      (clobber (reg:SI GPR_IP))
      (clobber (reg:DI GPR_16))
      (clobber (reg:DI GPR_18))
      (clobber (reg:SI GPR_20))
      (clobber (reg:SI GPR_LR))
      (clobber (reg:CC CC_REGNUM))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  "flag_reciprocal_math"
  "jalr r1"
  [(set_attr "type" "fp_sfunc")])
 
 
;; Fused multiply-add
(define_expand "fmasf4"
  [(parallel
     [(set (match_operand:SF 0 "gpr_operand" "")
           (fma:SF (match_operand:SF 1 "gpr_operand" "")
                   (match_operand:SF 2 "gpr_operand" "")
                   (match_operand:SF 3 "gpr_operand" "")))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  "")
 
; The multiply operands are commutative, but since they have the
; same constraints, there is no point in telling reload about this.
(define_insn "*fmadd"
  [(match_parallel 4 "float_operation"
     [(set (match_operand:SF 0 "gpr_operand" "=r")
           (fma:SF (match_operand:SF 1 "gpr_operand" "r")
                   (match_operand:SF 2 "gpr_operand" "r")
                   (match_operand:SF 3 "gpr_operand" "0")))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "fmadd %0,%1,%2"
  [(set_attr "type" "fp")])
 
; Once vetorization consistently works for this port, should check
; if the fmadd / fmsub patterns still serve a purpose.  With the
; introduction of fma / fnma handling by the SSA optimizers,
; at least scalars should be handled by these optimizers, would
; have to see how well they do on vectors from auto-vectorization.
;
; combiner pattern, also used by vector combiner pattern
(define_expand "maddsf"
  [(parallel
     [(set (match_operand:SF 0 "gpr_operand" "=r")
           (plus:SF (mult:SF (match_operand:SF 1 "gpr_operand" "r")
                             (match_operand:SF 2 "gpr_operand" "r"))
                    (match_operand:SF 3 "gpr_operand" "0")))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  "TARGET_FUSED_MADD")
 
(define_insn "*maddsf_combine"
  [(match_parallel 4 "float_operation"
     [(set (match_operand:SF 0 "gpr_operand" "=r")
           (plus:SF (mult:SF (match_operand:SF 1 "gpr_operand" "r")
                             (match_operand:SF 2 "gpr_operand" "r"))
                    (match_operand:SF 3 "gpr_operand" "0")))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  "TARGET_FUSED_MADD"
  "fmadd %0,%1,%2"
  [(set_attr "type" "fp")])
 
;; Fused multiply-sub
(define_expand "fnmasf4"
  [(parallel
     [(set (match_operand:SF 0 "gpr_operand" "")
           (fma:SF (neg:SF (match_operand:SF 1 "gpr_operand" ""))
                   (match_operand:SF 2 "gpr_operand" "")
                   (match_operand:SF 3 "gpr_operand" "")))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  "")
 
(define_insn "*fmsub"
  [(match_parallel 4 "float_operation"
     [(set (match_operand:SF 0 "gpr_operand" "=r")
           (fma:SF (neg:SF (match_operand:SF 1 "gpr_operand" "r"))
                   (match_operand:SF 2 "gpr_operand" "r")
                   (match_operand:SF 3 "gpr_operand" "0")))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "fmsub %0,%1,%2"
  [(set_attr "type" "fp")])
 
(define_insn "*fmsub_combine"
  [(match_parallel 4 "float_operation"
     [(set (match_operand:SF 0 "gpr_operand" "=r")
           (minus:SF  (match_operand:SF 3 "gpr_operand" "0")
                      (mult:SF (match_operand:SF 1 "gpr_operand" "r")
                               (match_operand:SF 2 "gpr_operand" "r"))))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  "TARGET_FUSED_MADD"
  "fmsub %0,%1,%2"
  [(set_attr "type" "fp")])
 
;; float / integer conversions
 
(define_expand "floatsisf2"
  [(parallel
     [(set (match_operand:SF 0 "gpr_operand" "")
           (float:SF (match_operand:SI 1 "gpr_operand" "")))
      (clobber (reg:CC_FP CCFP_REGNUM))])])
 
(define_insn "*floatsisf2_i"
  [(match_parallel 2 "float_operation"
     [(set (match_operand:SF 0 "gpr_operand" "=r")
           (float:SF (match_operand:SI 1 "gpr_operand" "r")))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "float %0, %1"
  [(set_attr "type" "fp")])
 
(define_expand "floatsisf2_cmp"
  [(parallel
     [(set (reg:CC_FP CCFP_REGNUM)
           (compare:CC_FP (float:SF (match_operand:SF 1 "gpr_operand" "r"))
                          (match_dup 2)))
      (set (match_operand:SF 0 "gpr_operand" "=r")
           (float:SF (match_dup 1)))])]
  ""
  "operands[2] = CONST0_RTX (SFmode);")
 
(define_insn "*floatsisf2_cmp_i"
  [(match_parallel 3 "float_operation"
     [(set (reg:CC_FP CCFP_REGNUM)
           (compare:CC_FP (float:SF (match_operand:SF 1 "gpr_operand" "r"))
                          (match_operand:SF 2 "const0_operand" "")))
      (set (match_operand:SF 0 "gpr_operand" "=r")
           (float:SF (match_dup 1)))])]
  ""
  "float %0, %1"
  [(set_attr "type" "fp")])
 
(define_expand "floatunssisf2"
  [(set (match_operand:SF 0 "gpr_operand" "")
        (float:SF (match_operand:SI 1 "gpr_operand" "")))]
  "epiphany_normal_fp_rounding == /*FP_MODE_ROUND_TRUNC*/ 2"
{
  rtx cst = force_reg (SImode, gen_int_mode (0xb0800000, SImode));
  rtx tmp = gen_reg_rtx (SImode);
  rtx cmp = gen_rtx_GTU (VOIDmode, gen_rtx_REG (CCmode, CC_REGNUM), const0_rtx);
 
  if (reg_overlap_mentioned_p (operands[0], operands[1]))
    operands[1] = copy_to_mode_reg (SImode, operands[1]);
  emit_insn (gen_floatsisf2 (operands[0], operands[1]));
  emit_insn (gen_ashrsi3 (tmp, operands[1], GEN_INT (8)));
  emit_insn (gen_sub_f (tmp, tmp, cst));
  emit_insn (gen_movsfcc (operands[0], cmp,
                          simplify_gen_subreg (SFmode, tmp, SImode, 0),
                          operands[0]));
  DONE;
})
 
(define_expand "fix_truncsfsi2"
  [(parallel
     [(set (match_operand:SI 0 "gpr_operand" "")
           (fix:SI (match_operand:SF 1 "gpr_operand" "")))
      (clobber (reg:CC_FP CCFP_REGNUM))])])
 
(define_insn "*fix_truncsfsi2_i"
  [(match_parallel 2 "float_operation"
     [(set (match_operand:SI 0 "gpr_operand" "=r")
           (fix:SI (match_operand:SF 1 "gpr_operand" "r")))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "fix %0, %1"
  [(set_attr "type" "fp")
   (set_attr "fp_mode" "round_trunc")])
 
(define_expand "fixuns_truncsfsi2"
  [(set (match_operand:SI 0 "gpr_operand" "")
        (unsigned_fix:SI (match_operand:SF 1 "gpr_operand" "")))]
  ""
{
  if (reg_overlap_mentioned_p (operands[0], operands[1]))
    operands[1] = copy_to_mode_reg (SImode, operands[1]);
  if (TARGET_SOFT_CMPSF || optimize_function_for_speed_p (cfun))
    {
      rtx op1si;
      /* By toggling what it to be bit31 before the shift, we get a chance to
         use a short movt insn.  */
      rtx bit31 = force_reg (SImode, GEN_INT (0x800000));
      rtx tmp = gen_reg_rtx (SImode);
      rtx limit = force_reg (SImode, gen_int_mode (0x4f000000, SImode));
      rtx cmp
        = gen_rtx_GE (VOIDmode, gen_rtx_REG (CCmode, CC_REGNUM), const0_rtx);
 
      op1si = simplify_gen_subreg (SImode, operands[1], SFmode, 0);
      emit_insn (gen_fix_truncsfsi2 (operands[0], operands[1]));
      emit_insn (gen_subsi3 (tmp, op1si, bit31));
      emit_insn (gen_ashlsi3 (tmp, tmp, GEN_INT (8)));
      emit_insn (gen_cmpsi_cc_insn (op1si, limit));
      emit_insn (gen_movsicc (operands[0], cmp, tmp, operands[0]));
    }
  else
    {
      REAL_VALUE_TYPE offset;
      rtx limit;
      rtx tmp = gen_reg_rtx (SFmode);
      rtx label = gen_label_rtx ();
      rtx bit31;
      rtx cc1 = gen_rtx_REG (CC_FPmode, CCFP_REGNUM);
      rtx cmp = gen_rtx_LT (VOIDmode, cc1, CONST0_RTX (SFmode));
 
      real_2expN (&offset, 31, SFmode);
      limit = CONST_DOUBLE_FROM_REAL_VALUE (offset, SFmode);
      limit = force_reg (SFmode, limit);
      emit_insn (gen_fix_truncsfsi2 (operands[0], operands[1]));
      emit_insn (gen_subsf3_f (tmp, operands[1], limit));
      emit_jump_insn (gen_branch_insn (label, cmp, cc1));
      bit31 = force_reg (SImode, gen_int_mode (0x80000000, SImode));
      emit_insn (gen_fix_truncsfsi2 (operands[0], tmp));
      emit_insn (gen_xorsi3 (operands[0], operands[0], bit31));
      emit_label (label);
    }
  DONE;
})
 
(define_insn "*iadd"
  [(match_parallel 3 "float_operation"
     [(set (match_operand:SI 0 "gpr_operand" "=r")
           (plus:SI (match_operand:SI 1 "gpr_operand" "%r")
                    (match_operand:SI 2 "gpr_operand" "r")))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "iadd %0, %1, %2"
  [(set_attr "type" "fp_int")])
 
(define_insn "*isub"
  [(match_parallel 3 "float_operation"
     [(set (match_operand:SI 0 "gpr_operand" "=r")
           (minus:SI (match_operand:SI 1 "gpr_operand" "r")
                     (match_operand:SI 2 "gpr_operand" "r")))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "isub %0, %1, %2"
  [(set_attr "type" "fp_int")])
 
(define_expand "mulsi3"
  [(parallel
     [(set (match_operand:SI 0 "gpr_operand" "")
           (mult:SI (match_operand:SI 1 "gpr_operand" "")
                    (match_operand:SI 2 "gpr_operand" "")))
      (clobber (reg:CC_FP CCFP_REGNUM))])])
 
(define_insn "*imul"
  [(match_parallel 3 "float_operation"
     [(set (match_operand:SI 0 "gpr_operand" "=r")
           (mult:SI (match_operand:SI 1 "gpr_operand" "%r")
                    (match_operand:SI 2 "gpr_operand" "r")))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "imul %0, %1, %2"
  [(set_attr "type" "fp_int")])
 
; combiner pattern, also used by vector combiner pattern
(define_expand "maddsi"
  [(parallel
     [(set (match_operand:SI 0 "gpr_operand" "=r")
           (plus:SI (mult:SI (match_operand:SI 1 "gpr_operand" "r")
                             (match_operand:SI 2 "gpr_operand" "r"))
                    (match_operand:SI 3 "gpr_operand" "0")))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  "")
 
(define_insn "*maddsi_combine"
  [(match_parallel 4 "float_operation"
     [(set (match_operand:SI 0 "gpr_operand" "=r")
           (plus:SI (mult:SI (match_operand:SI 1 "gpr_operand" "r")
                             (match_operand:SI 2 "gpr_operand" "r"))
                    (match_operand:SI 3 "gpr_operand" "0")))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "imsub %0, %1, %2"
  [(set_attr "type" "fp_int")])
 
(define_insn "*imsub"
  [(match_parallel 4 "float_operation"
     [(set (match_operand:SI 0 "gpr_operand" "=r")
           (minus:SI (match_operand:SI 3 "gpr_operand" "0")
                     (mult:SI (match_operand:SI 1 "gpr_operand" "r")
                              (match_operand:SI 2 "gpr_operand" "r"))))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "imsub %0, %1, %2"
  [(set_attr "type" "fp_int")])
 
(define_expand "divsi3"
  [(parallel
     [(set (match_operand:SI 0 "move_dest_operand" "")
           (div:SI (match_operand:SI 1 "move_src_operand" "")
                   (match_operand:SI 2 "move_src_operand" "")))
      (use (match_dup 3))
      (clobber (reg:SI 0))
      (clobber (reg:SI 1))
      (clobber (reg:SI GPR_IP))
      (clobber (reg:DI GPR_16))
      (clobber (reg:DI GPR_18))
      (clobber (reg:SI GPR_20))
      (clobber (reg:SI GPR_LR))
      (clobber (reg:CC CC_REGNUM))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "operands[3] = sfunc_symbol (\"__divsi3\");")
 
;; Before reload, keep the hard reg usage to clobbers so that the loop
;; optimizers can more easily move this insn.
(define_insn_and_split "*divsi3_1"
  [(match_parallel 4 "float_operation"
     [(set (match_operand:SI 0 "move_dest_operand" "=r,r")
           (div:SI (match_operand:SI 1 "move_src_operand" "rU16m,rU16mCal")
                   (match_operand:SI 2 "move_src_operand" "rU16m,rU16mCal")))
      (use (match_operand:SI 3 "call_address_operand" "Csy,r"))
      (clobber (reg:SI 0))
      (clobber (reg:SI 1))
      (clobber (reg:SI GPR_IP))
      (clobber (reg:DI GPR_16))
      (clobber (reg:DI GPR_18))
      (clobber (reg:SI GPR_20))
      (clobber (reg:SI GPR_LR))
      (clobber (reg:CC CC_REGNUM))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "#"
  "&& reload_completed"
  [(set (reg:SI 0) (match_dup 1))
   (set (reg:SI 1) (match_dup 2))
   (parallel
     [(set (reg:SI 0) (div:SI (reg:SI 0) (reg:SI 1)))
      (use (match_dup 3))
      (clobber (reg:SI 1))
      (clobber (reg:SI GPR_IP))
      (clobber (reg:DI GPR_16))
      (clobber (reg:DI GPR_18))
      (clobber (reg:SI GPR_20))
      (clobber (reg:SI GPR_LR))
      (clobber (reg:CC CC_REGNUM))
      (clobber (reg:CC_FP CCFP_REGNUM))
      (match_dup 5)
      (match_dup 6)])
   (set (match_dup 0) (reg:SI 0))]
  "operands[5] = XVECEXP (operands[4], 0, XVECLEN (operands[4], 0) - 2);
   operands[6] = XVECEXP (operands[4], 0, XVECLEN (operands[4], 0) - 1);"
  [(set_attr "type" "fp_sfunc")
   (set_attr "length" "16,24")])
 
(define_insn "*divsi3_2"
  [(match_parallel 1 "float_operation"
     [(set (reg:SI 0) (div:SI (reg:SI 0) (reg:SI 1)))
      (use (match_operand:SI 0 "call_address_operand" "Csy,r"))
      (clobber (reg:SI 1))
      (clobber (reg:SI GPR_IP))
      (clobber (reg:DI GPR_16))
      (clobber (reg:DI GPR_18))
      (clobber (reg:SI GPR_20))
      (clobber (reg:SI GPR_LR))
      (clobber (reg:CC CC_REGNUM))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "%f0"
  [(set_attr "type" "fp_sfunc")])
 
(define_expand "udivsi3"
  [(parallel
     [(set (match_operand:SI 0 "move_dest_operand" "")
           (udiv:SI (match_operand:SI 1 "move_src_operand" "")
                    (match_operand:SI 2 "move_src_operand" "")))
      (use (match_dup 3))
      (clobber (reg:SI 0))
      (clobber (reg:SI 1))
      (clobber (reg:SI GPR_IP))
      (clobber (reg:DI GPR_16))
      (clobber (reg:SI GPR_18))
      (clobber (reg:SI GPR_LR))
      (clobber (reg:CC CC_REGNUM))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "operands[3] = sfunc_symbol (\"__udivsi3\");")
 
;; Before reload, keep the hard reg usage to clobbers so that the loop
;; optimizers can more easily move this insn.
(define_insn_and_split "*udivsi3_1"
  [(match_parallel 4 "float_operation"
     [(set (match_operand:SI 0 "move_dest_operand" "=r,r")
           (udiv:SI (match_operand:SI 1 "move_src_operand" "rU16m,rU16mCal")
                    (match_operand:SI 2 "move_src_operand" "rU16m,rU16mCal")))
      (use (match_operand:SI 3 "call_address_operand" "Csy,r"))
      (clobber (reg:SI 0))
      (clobber (reg:SI 1))
      (clobber (reg:SI GPR_IP))
      (clobber (reg:DI GPR_16))
      (clobber (reg:SI GPR_18))
      (clobber (reg:SI GPR_LR))
      (clobber (reg:CC CC_REGNUM))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "#"
  "&& reload_completed"
  [(set (reg:SI 0) (match_dup 1))
   (set (reg:SI 1) (match_dup 2))
   (parallel
     [(set (reg:SI 0) (udiv:SI (reg:SI 0) (reg:SI 1)))
      (use (match_dup 3))
      (clobber (reg:SI 1))
      (clobber (reg:SI GPR_IP))
      (clobber (reg:DI GPR_16))
      (clobber (reg:SI GPR_18))
      (clobber (reg:SI GPR_LR))
      (clobber (reg:CC CC_REGNUM))
      (clobber (reg:CC_FP CCFP_REGNUM))
      (match_dup 5)
      (match_dup 6)])
   (set (match_dup 0) (reg:SI 0))]
  "operands[5] = XVECEXP (operands[4], 0, XVECLEN (operands[4], 0) - 2);
   operands[6] = XVECEXP (operands[4], 0, XVECLEN (operands[4], 0) - 1);"
  [(set_attr "type" "fp_sfunc")
   (set_attr "length" "16,24")])
 
(define_insn "*udivsi3_2"
  [(match_parallel 1 "float_operation"
     [(set (reg:SI 0) (udiv:SI (reg:SI 0) (reg:SI 1)))
      (use (match_operand:SI 0 "call_address_operand" "Csy,r"))
      (clobber (reg:SI 1))
      (clobber (reg:SI GPR_IP))
      (clobber (reg:DI GPR_16))
      (clobber (reg:SI GPR_18))
      (clobber (reg:SI GPR_LR))
      (clobber (reg:CC CC_REGNUM))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "%f0"
  [(set_attr "type" "fp_sfunc")])
 
(define_expand "modsi3"
  [(parallel
     [(set (match_operand:SI 0 "move_dest_operand" "")
           (mod:SI (match_operand:SI 1 "move_src_operand" "")
                   (match_operand:SI 2 "move_src_operand" "")))
      (use (match_dup 3))
      (clobber (reg:SI 0))
      (clobber (reg:SI 1))
      (clobber (reg:SI 2))
      (clobber (reg:SI GPR_IP))
      (clobber (reg:DI GPR_16))
      (clobber (reg:DI GPR_18))
      (clobber (reg:SI GPR_LR))
      (clobber (reg:CC CC_REGNUM))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "operands[3] = sfunc_symbol (\"__modsi3\");")
 
;; Before reload, keep the hard reg usage to clobbers so that the loop
;; optimizers can more easily move this insn.
(define_insn_and_split "*modsi3_1"
  [(match_parallel 4 "float_operation"
     [(set (match_operand:SI 0 "move_dest_operand" "=r,r")
           (mod:SI (match_operand:SI 1 "move_src_operand" "rU16m,rU16mCal")
                   (match_operand:SI 2 "move_src_operand" "rU16m,rU16mCal")))
      (use (match_operand:SI 3 "call_address_operand" "Csy,r"))
      (clobber (reg:SI 0))
      (clobber (reg:SI 1))
      (clobber (reg:SI 2))
      (clobber (reg:SI GPR_IP))
      (clobber (reg:DI GPR_16))
      (clobber (reg:DI GPR_18))
      (clobber (reg:SI GPR_LR))
      (clobber (reg:CC CC_REGNUM))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "#"
  "&& reload_completed"
  [(set (reg:SI 0) (match_dup 1))
   (set (reg:SI 1) (match_dup 2))
   (parallel
     [(set (reg:SI 0) (mod:SI (reg:SI 0) (reg:SI 1)))
      (use (match_dup 3))
      (clobber (reg:SI 2))
      (clobber (reg:SI GPR_IP))
      (clobber (reg:DI GPR_16))
      (clobber (reg:DI GPR_18))
      (clobber (reg:SI GPR_LR))
      (clobber (reg:CC CC_REGNUM))
      (clobber (reg:CC_FP CCFP_REGNUM))
      (match_dup 5)
      (match_dup 6)])
   (set (match_dup 0) (reg:SI 0))]
  "operands[5] = XVECEXP (operands[4], 0, XVECLEN (operands[4], 0) - 2);
   operands[6] = XVECEXP (operands[4], 0, XVECLEN (operands[4], 0) - 1);"
  [(set_attr "type" "fp_sfunc")
   (set_attr "length" "16,24")])
 
(define_insn "*modsi3_2"
  [(match_parallel 1 "float_operation"
     [(set (reg:SI 0) (mod:SI (reg:SI 0) (reg:SI 1)))
      (use (match_operand:SI 0 "call_address_operand" "Csy,r"))
      (clobber (reg:SI 2))
      (clobber (reg:SI GPR_IP))
      (clobber (reg:DI GPR_16))
      (clobber (reg:DI GPR_18))
      (clobber (reg:SI GPR_LR))
      (clobber (reg:CC CC_REGNUM))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "%f0"
  [(set_attr "type" "fp_sfunc")])
 
(define_expand "umodsi3"
  [(parallel
     [(set (match_operand:SI 0 "move_dest_operand" "")
           (umod:SI (match_operand:SI 1 "move_src_operand" "")
                    (match_operand:SI 2 "move_src_operand" "")))
      (use (match_dup 3))
      (clobber (reg:SI 0))
      (clobber (reg:SI 1))
      (clobber (reg:SI 2))
      (clobber (reg:SI GPR_IP))
      (clobber (reg:DI GPR_16))
      (clobber (reg:SI GPR_LR))
      (clobber (reg:CC CC_REGNUM))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "operands[3] = sfunc_symbol (\"__umodsi3\");")
 
;; Before reload, keep the hard reg usage to clobbers so that the loop
;; optimizers can more easily move this insn.
(define_insn_and_split "*umodsi3_1"
  [(match_parallel 4 "float_operation"
     [(set (match_operand:SI 0 "move_dest_operand" "=r,r")
           (umod:SI (match_operand:SI 1 "move_src_operand" "rU16m,rU16mCal")
                    (match_operand:SI 2 "move_src_operand" "rU16m,rU16mCal")))
      (use (match_operand:SI 3 "call_address_operand" "Csy,r"))
      (clobber (reg:SI 0))
      (clobber (reg:SI 1))
      (clobber (reg:SI 2))
      (clobber (reg:SI GPR_IP))
      (clobber (reg:DI GPR_16))
      (clobber (reg:SI GPR_LR))
      (clobber (reg:CC CC_REGNUM))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "#"
  "&& reload_completed"
  [(set (reg:SI 0) (match_dup 1))
   (set (reg:SI 1) (match_dup 2))
   (parallel
     [(set (reg:SI 0) (umod:SI (reg:SI 0) (reg:SI 1)))
      (use (match_dup 3))
      (clobber (reg:SI 2))
      (clobber (reg:SI GPR_IP))
      (clobber (reg:DI GPR_16))
      (clobber (reg:SI GPR_LR))
      (clobber (reg:CC CC_REGNUM))
      (clobber (reg:CC_FP CCFP_REGNUM))
      (match_dup 5)
      (match_dup 6)])
   (set (match_dup 0) (reg:SI 0))]
  "operands[5] = XVECEXP (operands[4], 0, XVECLEN (operands[4], 0) - 2);
   operands[6] = XVECEXP (operands[4], 0, XVECLEN (operands[4], 0) - 1);"
  [(set_attr "type" "fp_sfunc")
   (set_attr "length" "16,24")])
 
(define_insn "*umodsi3_2"
  [(match_parallel 1 "float_operation"
     [(set (reg:SI 0) (umod:SI (reg:SI 0) (reg:SI 1)))
      (use (match_operand:SI 0 "call_address_operand" "Csy,r"))
      (clobber (reg:SI 2))
      (clobber (reg:SI GPR_IP))
      (clobber (reg:DI GPR_16))
      (clobber (reg:SI GPR_LR))
      (clobber (reg:CC CC_REGNUM))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "%f0"
  [(set_attr "type" "fp_sfunc")])
 
; Disable interrupts.
; Any earlier values read from CONFIG_REGNUM are out of date, since interrupts
; might have changed settings that we do not want to mess with.
(define_insn "gid"
  [(set (reg:SI CONFIG_REGNUM)
        (unspec_volatile:SI [(const_int 0)] UNSPECV_GID))]
  ""
  "gid"
  [(set_attr "type" "flow")])
 
; Enable interrupts.
; Present CONTROL_REGNUM here to make sure it is live before the
; actual uses in floating point insns / calls are inserted.
; FWIW, interrupts also do mind what is in the control register.
(define_insn "gie"
  [(unspec_volatile [(reg:SI CONFIG_REGNUM)] UNSPECV_GIE)]
  ""
  "gie"
  [(set_attr "type" "flow")])
 
; Floating point instructions require manipulating the control register.
; Manipulating the control register needs aritmetic.
; Arithmetic clobbers flags.
; The flags are in the status register, which also contains the alternate
; flag and the interrupt enable/disable bits.
; saving/restoring status and mixing up the order with gid/gie could
; lead to disaster.
; Usually, saving/restoring the status is unnecessary, and will be optimized
; away.  But when we really need it, we must make sure that we don't change
; anything but the flags.
; N.B.: We could make the constant easier to load by inverting it, but
; then we'd need to clobber the saved value - and that would make optimizing
; away unneeded saves/restores harder / less likely.
(define_expand "movcc"
  [(parallel [(set (match_operand:CC 0 "cc_move_operand"  "")
                   (match_operand:CC 1 "cc_move_operand" ""))
              (use (match_dup 2))
              (clobber (match_scratch:SI 3                 "=X, &r"))])]
  ""
  "operands[2] = gen_int_mode (~0x10f0, SImode);")
 
(define_insn "*movcc_i"
  [(set (match_operand:CC 0 "cc_move_operand"  "=r,Rcc")
        (match_operand:CC 1 "cc_move_operand" "Rcc,  r"))
   (use (match_operand:SI 2 "nonmemory_operand"  "X,  r"))
   (clobber (match_scratch:SI 3                 "=X, &r"))]
  ""
  "@
   movfs %0,status
   movfs %3,status\;eor %3,%3,%1\;and %3,%3,%2\;eor %3,%3,%1\;movts status,%3"
  [(set_attr "type" "flow")
   (set_attr "length" "20,4")])
 
(define_insn_and_split "set_fp_mode"
  [(set (reg:SI FP_NEAREST_REGNUM)
        (match_operand:SI 0 "set_fp_mode_operand" "rCfm"))
   (set (reg:SI FP_TRUNCATE_REGNUM) (match_dup 0))
   (set (reg:SI FP_ANYFP_REGNUM)
        (match_operand:SI 1 "set_fp_mode_operand" "rCfm"))
   (use (match_operand:SI 2 "gpr_operand" "r"))
   (clobber (reg:CC CC_REGNUM))
   (clobber (match_scratch:SI 3 "=&r"))]
  ""
  "#"
  "reload_completed || !rtx_equal_p (operands[0], operands[1])"
  [(const_int 0)]
{
  if (!reload_completed)
    emit_note (NOTE_INSN_DELETED);
  else
    epiphany_expand_set_fp_mode (operands);
  DONE;
})
 
 
;; Boolean instructions.
;;
;; We don't define the DImode versions as expand_binop does a good enough job.
 
(define_insn "andsi3"
  [(set (match_operand:SI 0 "gpr_operand" "=r")
        (and:SI (match_operand:SI 1 "gpr_operand" "r")
                (match_operand:SI 2 "gpr_operand" "r")))
   (clobber (reg:CC CC_REGNUM))]
  ""
  "and %0,%1,%2")
 
(define_insn "iorsi3"
  [(set (match_operand:SI 0 "gpr_operand" "=r")
        (ior:SI (match_operand:SI 1 "gpr_operand" "r")
                (match_operand:SI 2 "gpr_operand" "r")))
   (clobber (reg:CC CC_REGNUM))]
  ""
  "orr %0,%1,%2")
 
(define_insn "xorsi3"
  [(set (match_operand:SI 0 "gpr_operand" "=r")
        (xor:SI (match_operand:SI 1 "gpr_operand" "r")
                (match_operand:SI 2 "gpr_operand" "r")))
   (clobber (reg:CC CC_REGNUM))]
  ""
  "eor %0,%1,%2")
 
(define_expand "one_cmplsi2"
  [(set (match_operand:SI 0 "gpr_operand" "")
        (xor:SI (match_operand:SI 1 "gpr_operand" "")
                (match_dup 2)))]
  ""
{
  if (epiphany_m1reg >= 0)
    emit_insn (gen_one_cmplsi2_i (operands[0], operands[1]));
  else
    emit_insn (gen_xorsi3 (operands[0], operands[1],
                           force_reg (SImode, GEN_INT (-1))));
  DONE;
})
 
; Note that folding this pattern into the xorsi3 pattern would make combine
; less effective.
(define_insn "one_cmplsi2_i"
  [(set (match_operand:SI 0 "gpr_operand" "=r")
        (not:SI (match_operand:SI 1 "gpr_operand" "r")))
   (clobber (reg:CC CC_REGNUM))]
  "epiphany_m1reg >= 0"
  "eor %0,%1,%-")
 
;; Shift instructions.
;; In principle we could support arbitrary symbolic values as shift constant
;; (truncating the value appropriately), but that would require a suitable
;; relocation and assembler & linker support.
(define_insn "ashrsi3"
  [(set (match_operand:SI 0 "gpr_operand" "=r,r")
        (ashiftrt:SI (match_operand:SI 1 "gpr_operand" "r,r")
                     (match_operand:SI 2 "arith_operand" "r,K")))
   (clobber (reg:CC CC_REGNUM))]
  ""
  "asr %0,%1,%2"
  [(set_attr "length" "4")
   (set_attr "type" "shift")])
 
(define_insn "ashrsi3_tst"
  [(set (reg:CC CC_REGNUM)
        (compare:CC
          (ashiftrt:SI (match_operand:SI 1 "gpr_operand" "r,r")
                       (match_operand:SI 2 "arith_operand" "r,K"))
        (const_int 0)))
   (set (match_operand:SI 0 "gpr_operand" "=r,r")
        (ashiftrt:SI (match_dup 1) (match_dup 2)))]
  ""
  "asr %0,%1,%2"
  [(set_attr "length" "4")
   (set_attr "type" "shift")])
 
;; Logical Shift Right
(define_insn "lshrsi3"
  [(set (match_operand:SI 0 "gpr_operand" "=r,r")
        (lshiftrt:SI (match_operand:SI 1 "gpr_operand" "r,r")
                     (match_operand:SI 2 "arith_operand" "r,K")))
   (clobber (reg:CC CC_REGNUM))]
  ""
  "lsr %0,%1,%2"
  [(set_attr "length" "4")
   (set_attr "type" "shift")])
 
(define_insn "lshrsi3_tst"
  [(set (reg:CC CC_REGNUM)
        (compare:CC
          (lshiftrt:SI (match_operand:SI 1 "gpr_operand" "r,r")
                       (match_operand:SI 2 "arith_operand" "r,K"))
        (const_int 0)))
   (set (match_operand:SI 0 "gpr_operand" "=r,r")
        (lshiftrt:SI (match_dup 1) (match_dup 2)))]
  ""
  "lsr %0,%1,%2"
  [(set_attr "length" "4")
   (set_attr "type" "shift")])
 
;; Logical/Arithmetic Shift Left
(define_insn "ashlsi3"
  [(set (match_operand:SI 0 "gpr_operand" "=r,r")
        (ashift:SI (match_operand:SI 1 "gpr_operand" "r,r")
                   (match_operand:SI 2 "arith_operand" "r,K")))
   (clobber (reg:CC CC_REGNUM))]
  ""
  "lsl %0,%1,%2"
  [(set_attr "length" "4")
   (set_attr "type" "shift")])
 
(define_insn "*ashlsi_btst"
  [(set (reg:CC_N_NE CC_REGNUM)
        (compare:CC_N_NE
          (zero_extract:SI (match_operand:SI 1 "gpr_operand" "r")
                           (const_int 1)
                           (match_operand 2 "const_int_operand" "K"))
          (const_int 0)))
   (clobber (match_scratch:SI 0 "=r"))]
  ""
{
  rtx xop[3];
 
  xop[0] = operands[0];
  xop[1] = operands[1];
  xop[2] = GEN_INT (31-INTVAL (operands[2]));
  output_asm_insn ("lsl %0,%1,%2", xop);
  return "";
})
 
;; zero extensions
(define_insn_and_split "zero_extendqisi2"
  [(set (match_operand:SI 0 "register_operand" "=r,r")
        (zero_extend:SI (match_operand:QI 1 "nonimmediate_operand" "r,m")))
   (clobber (reg:CC CC_REGNUM))]
  ""
  "@
   #
   ldrb %0,%1"
  "reload_completed
   ? true_regnum (operands[1]) >= 0
   : REG_P (operands[1]) && REGNO (operands[1]) < FIRST_PSEUDO_REGISTER"
  [(parallel [(set (match_dup 0) (ashift:SI (match_dup 2) (const_int 24)))
              (clobber (reg:CC CC_REGNUM))])
   (parallel [(set (match_dup 0) (lshiftrt:SI (match_dup 0) (const_int 24)))
              (clobber (reg:CC CC_REGNUM))])]
  "operands[2] = simplify_gen_subreg (SImode, operands[1], QImode, 0);")
 
(define_insn "zero_extendhisi2"
  [(set (match_operand:SI 0 "register_operand" "=r,r")
        (zero_extend:SI (match_operand:HI 1 "nonimmediate_operand" "0,m")))]
  ""
  "@
   movt %0, 0
   ldrh %0,%c1")
 
 
;; Compare instructions.
 
(define_insn "cmpsi_cc_insn"
  [(set (reg:CC CC_REGNUM)
        (compare:CC (match_operand:SI 0 "add_reg_operand" "r,r")
                    (match_operand:SI 1 "arith_operand" "r,L")))
   (clobber (match_scratch:SI 2 "=r,r"))]
  ""
  "sub %2,%0,%1"
  [(set_attr "type" "compare")])
 
(define_insn "sub_f"
  [(set (reg:CC CC_REGNUM)
        (compare:CC (match_operand:SI 1 "gpr_operand"  "r,r")
                    (match_operand:SI 2 "arith_operand" "r,L")))
   (set (match_operand:SI 0 "gpr_operand" "=r,r")
        (minus:SI (match_dup 1) (match_dup 2)))]
  ""
  "sub %0,%1,%2"
  [(set_attr "type" "compare")])
 
(define_insn "*sub_f_add_imm"
  [(set (reg:CC CC_REGNUM)
        (compare:CC (match_operand:SI 1 "gpr_operand"  "r")
                    (match_operand:SI 2 "arith_int_operand" "L")))
   (set (match_operand:SI 0 "gpr_operand" "=r")
        (plus:SI (match_dup 1) (match_operand:SI 3 "const_int_operand" "L")))]
  "INTVAL (operands[2]) == -INTVAL (operands[3])"
  "sub %0,%1,%2"
  [(set_attr "type" "compare")])
 
(define_expand "abssi2"
  [(set (match_dup 2) (const_int 0))
   (parallel [(set (reg:CC CC_REGNUM)
                   (compare:CC (match_dup 2)
                               (match_operand:SI 1 "nonmemory_operand" "")))
              (set (match_dup 3)
                   (minus:SI (match_dup 2) (match_dup 1)))])
   (set (match_operand:SI 0 "gpr_operand" "=r")
        (if_then_else:SI (gt:SI (reg:CC CC_REGNUM) (const_int 0))
                         (match_dup 3)
                         (match_dup 1)))]
  "TARGET_CMOVE"
  "operands[2] = gen_reg_rtx (SImode); operands[3] = gen_reg_rtx (SImode);")
 
(define_insn "*add_c"
  [(set (reg:CC_C_LTU CC_REGNUM)
        (compare:CC_C_LTU
          (plus:SI (match_operand:SI 1 "gpr_operand" "%r,r")
                   (match_operand:SI 2 "arith_operand" "r,L"))
          (match_dup 1)))
   (set (match_operand:SI 0 "gpr_operand" "=r,r")
        (plus:SI (match_dup 1) (match_dup 2)))]
  ""
  "add %0,%1,%2"
  [(set_attr "type" "compare")])
 
(define_insn "*add_c_rev"
  [(set (reg:CC_C_LTU CC_REGNUM)
        (compare:CC_C_LTU
          (plus:SI (match_operand:SI 1 "gpr_operand" "%r,r")
                   (match_operand:SI 2 "arith_operand" "r,L"))
          (match_dup 1)))
   (set (match_operand:SI 0 "gpr_operand" "=r,r")
        (plus:SI (match_dup 2) (match_dup 1)))]
  ""
  "add %0,%1,%2"
  [(set_attr "type" "compare")])
 
(define_insn "*sub_c"
  [(set (reg:CC_C_GTU CC_REGNUM)
        (compare:CC_C_GTU
          (minus:SI (match_operand:SI 1 "gpr_operand"  "r,r")
                    (match_operand:SI 2 "arith_operand" "r,L"))
          (match_dup 1)))
   (set (match_operand:SI 0 "gpr_operand" "=r,r")
        (minus:SI (match_dup 1) (match_dup 2)))]
  ""
  "sub %0,%1,%2"
  [(set_attr "type" "compare")])
 
(define_insn "*sub_c_void"
  [(set (reg:CC_C_GTU CC_REGNUM)
        (compare:CC_C_GTU
          (minus:SI (match_operand:SI 1 "gpr_operand"  "r,r")
                    (match_operand:SI 2 "arith_operand" "r,L"))
          (match_dup 1)))
   (clobber (match_scratch:SI 0 "=r,r"))]
  ""
  "sub %0,%1,%2"
  [(set_attr "type" "compare")])
 
; floating point comparisons
 
(define_insn "*cmpsf_cc_insn"
  [(match_parallel 3 "float_operation"
     [(set (reg:CC_FP CCFP_REGNUM)
           (compare:CC_FP (match_operand:SF 0 "gpr_operand" "r")
                          (match_operand:SF 1 "gpr_operand" "r")))
      (clobber (match_scratch:SF 2 "=r"))])]
  "!TARGET_SOFT_CMPSF"
  "fsub %2,%0,%1"
  [(set_attr "type" "fp")
   (set_attr "fp_mode" "round_unknown")])
 
;; ??? do we have to relax the operand0 predicate to immediate_operand
;; to allow the rtl loop optimizer to generate comparisons?  OTOH
;; we want call_address_operand to enforce valid operands so that
;; combine won't do silly things, allowing instruction scheduling to do
;; a proper job.
(define_insn "*cmpsf_eq"
  [(set (reg:CC_FP_EQ CC_REGNUM) (compare:CC_FP_EQ (reg:SF 0) (reg:SF 1)))
   (use (match_operand:SI 0 "call_address_operand" "Csy,r"))
   (clobber (reg:SI GPR_IP))
   (clobber (reg:SI GPR_LR))]
  "TARGET_SOFT_CMPSF"
  "%f0"
  [(set_attr "type" "sfunc")])
 
(define_insn "*cmpsf_gte"
  [(set (reg:CC_FP_GTE CC_REGNUM) (compare:CC_FP_GTE (reg:SF 0) (reg:SF 1)))
   (use (match_operand:SI 0 "call_address_operand" "Csy,r"))
   (clobber (reg:SI GPR_IP))
   (clobber (reg:SI GPR_LR))]
  "TARGET_SOFT_CMPSF"
  "%f0"
  [(set_attr "type" "sfunc")])
 
(define_insn "*cmpsf_ord"
  [(set (reg:CC_FP_ORD CC_REGNUM) (compare:CC_FP_ORD (reg:SF 0) (reg:SF 1)))
   (use (match_operand:SI 0 "call_address_operand" "Csy,r"))
   (clobber (reg:SI GPR_IP))
   (clobber (reg:SI GPR_16))
   (clobber (reg:SI GPR_LR))]
  "TARGET_SOFT_CMPSF"
  "%f0"
  [(set_attr "type" "sfunc")])
 
(define_insn "*cmpsf_uneq"
  [(set (reg:CC_FP_UNEQ CC_REGNUM) (compare:CC_FP_UNEQ (reg:SF 0) (reg:SF 1)))
   (use (match_operand:SI 0 "call_address_operand" "Csy,r"))
   (clobber (reg:SI GPR_IP))
   (clobber (reg:SI GPR_16))
   (clobber (reg:SI GPR_LR))]
  "TARGET_SOFT_CMPSF"
  "%f0"
  [(set_attr "type" "sfunc")])
 
;; conditional moves
 
(define_expand "movcc"
  [(set (match_operand:WMODE 0 "gpr_operand" "")
        (if_then_else:WMODE (match_operand 1 "comparison_operator" "")
                            (match_operand:WMODE 2 "gpr_operand" "")
                            (match_operand:WMODE 3 "gpr_operand" "")))]
  "TARGET_CMOVE"
{
  rtx cmp_op0 = XEXP (operands[1], 0);
  rtx cmp_op1 = XEXP (operands[1], 1);
  enum machine_mode cmp_in_mode;
  enum rtx_code code = GET_CODE (operands[1]);
 
  cmp_in_mode = GET_MODE (cmp_op0);
  if (cmp_in_mode == VOIDmode)
    cmp_in_mode = GET_MODE (cmp_op1);
  if (cmp_in_mode == VOIDmode)
    cmp_in_mode = SImode;
  /* If the operands are a better match when reversed, swap them now.
     This allows combine to see the proper comparison codes.  */
  if (rtx_equal_p (operands[0], operands[2])
      && !rtx_equal_p (operands[0], operands[3]))
    {
      rtx tmp = operands[2]; operands[2] = operands[3]; operands[3] = tmp;
      code = (FLOAT_MODE_P (GET_MODE (cmp_op0))
              ? reverse_condition_maybe_unordered (code)
              : reverse_condition (code));
    }
 
  if (proper_comparison_operator (operands[1], VOIDmode))
    operands[1] = gen_rtx_fmt_ee (code, cmp_in_mode, cmp_op0, cmp_op1);
  else
    {
      if (!currently_expanding_to_rtl)
        {
          /* ???  It would seem safest to FAIL here, but that would defeat
             the purpose of having an if-conversion pass; its logic currently
             assumes that the backend should be safe to insert condition code
             setting instructions, as the same condition codes were presumably
             set by the if-conversion input code.  */
        }
      /* What mode to give as first operand to gen_compare_reg here is
         debatable.  VOIDmode would be minimalist; telling gen_compare_reg
         to use the mode of CC_REGNUM (or putting it on the comparison
         operator afterwards) is also a logical choice.  OTOH, by using
         mode, we have mode combine opportunities with flag setting
         operations - if we get some.  */
      operands[1]
        = gen_compare_reg (mode, code, cmp_in_mode, cmp_op0, cmp_op1);
    }
})
 
(define_insn "*movcc_insn"
  [(set (match_operand:WMODE 0 "gpr_operand" "=r")
        (if_then_else:WMODE (match_operator 3 "proper_comparison_operator"
                              [(match_operand 4 "cc_operand") (const_int 0)])
                            (match_operand:WMODE 1 "gpr_operand" "r")
                            (match_operand:WMODE 2 "gpr_operand" "0")))]
  "TARGET_CMOVE"
  "mov%d3 %0,%1"
  [(set_attr "type" "cmove")])
 
(define_peephole2
  [(parallel [(set (match_operand:WMODE 0 "gpr_operand" "")
                   (match_operand:WMODE 1 "" ""))
              (clobber (match_operand 8 "cc_operand"))])
   (match_operand 2 "" "")
   (set (match_operand:WMODE2 3 "gpr_operand" "")
        (match_operand:WMODE2 9 "gpr_operand" ""))
   (set (match_dup 3)
        (if_then_else:WMODE2 (match_operator 5 "proper_comparison_operator"
                               [(match_operand 6 "cc_operand")
                                (match_operand 7 "const0_operand")])
                             (match_operand:WMODE2 4 "nonmemory_operand" "")
                             (match_dup 3)))]
  "REGNO (operands[0]) == REGNO (operands[9])
   && peep2_reg_dead_p (3, operands[0])
   && !reg_set_p (operands[0], operands[2])
   && !reg_set_p (operands[3], operands[2])
   && !reg_overlap_mentioned_p (operands[3], operands[2])"
  [(parallel [(set (match_dup 10) (match_dup 1))
              (clobber (match_dup 8))])
   (match_dup 2)
   (set (match_dup 3)
        (if_then_else:WMODE2 (match_dup 5) (match_dup 4) (match_dup 3)))]
{
  operands[10] = simplify_gen_subreg (mode, operands[3],
                                      mode, 0);
  replace_rtx (operands[2], operands[9], operands[3]);
  replace_rtx (operands[2], operands[0], operands[10]);
  gcc_assert (!reg_overlap_mentioned_p (operands[0], operands[2]));
})
 
(define_peephole2
  [(parallel [(set (match_operand 6 "cc_operand") (match_operand 2 "" ""))
              (set (match_operand:WMODE 0 "gpr_operand" "")
                   (match_operand:WMODE 1 "" ""))])
   (set (match_operand:WMODE2 3 "gpr_operand" "")
        (match_operand:WMODE2 4 "gpr_operand"))
   (set (match_dup 3)
        (if_then_else:WMODE2 (match_operator 5 "proper_comparison_operator"
                               [(match_dup 6)
                               (match_operand:WMODE 7 "const0_operand")])
                            (match_operand:WMODE2 8 "gpr_operand")
                            (match_dup 3)))]
  "REGNO (operands[0]) == REGNO (operands[8])
   && REVERSIBLE_CC_MODE (GET_MODE (operands[6]))
   && peep2_reg_dead_p (3, operands[6])
   && peep2_reg_dead_p (3, operands[0])
   && !reg_overlap_mentioned_p (operands[4], operands[3])"
  [(parallel [(set (match_dup 6) (match_dup 2))
              (set (match_dup 9) (match_dup 1))])
   (set (match_dup 3)
        (if_then_else:WMODE2 (match_dup 5) (match_dup 4) (match_dup 3)))]
  "
{
  operands[5]
    = gen_rtx_fmt_ee (REVERSE_CONDITION (GET_CODE (operands[5]),
                                         GET_MODE (operands[6])),
                      GET_MODE (operands[5]), operands[6], operands[7]);
  operands[9] = simplify_gen_subreg (mode, operands[3],
                                     mode, 0);
}")
 
;; These control RTL generation for conditional jump insns
 
;; To signal to can_compare_p that the cbranchs?4 patterns work,
;; they must allow const0_rtx for both comparison operands
(define_expand "cbranchsi4"
  [(set (reg CC_REGNUM)
        (compare (match_operand:SI 1 "add_operand" "")
                 (match_operand:SI 2 "arith_operand" "")))
   (set (pc)
        (if_then_else
              (match_operator 0 "ordered_comparison_operator" [(reg CC_REGNUM)
                                                               (const_int 0)])
              (label_ref (match_operand 3 "" ""))
              (pc)))]
  ""
{
  rtx cmp = gen_compare_reg (VOIDmode, GET_CODE (operands[0]), SImode,
                             operands[1], operands[2]);
  emit_jump_insn (gen_branch_insn (operands[3], cmp, XEXP (cmp, 0)));
  DONE;
})
 
(define_expand "cbranchsf4"
  [(set (reg CC_REGNUM)
        (compare (match_operand:SF 1 "arith_operand" "")
                 (match_operand:SF 2 "arith_operand" "")))
   (set (pc)
        (if_then_else
              (match_operator 0 "comparison_operator" [(reg CC_REGNUM)
                                                       (const_int 0)])
              (label_ref (match_operand 3 "" ""))
              (pc)))]
  ""
{
  rtx cmp = gen_compare_reg (VOIDmode, GET_CODE (operands[0]), SFmode,
                             operands[1], operands[2]);
  emit_jump_insn (gen_branch_insn (operands[3], cmp, XEXP (cmp, 0)));
  DONE;
})
 
;; Now match both normal and inverted jump.
 
(define_insn "branch_insn"
  [(set (pc)
        (if_then_else (match_operator 1 "proper_comparison_operator"
                                      [(match_operand 2 "cc_operand")
                                       (const_int 0)])
                      (label_ref (match_operand 0 "" ""))
                      (pc)))]
  ""
  "b%d1 %l0"
  [(set_attr "type" "branch")])
 
(define_insn "*rev_branch_insn"
  [(set (pc)
        (if_then_else (match_operator 1 "proper_comparison_operator"
                                      [(reg CC_REGNUM) (const_int 0)])
                      (pc)
                      (label_ref (match_operand 0 "" ""))))]
  ""
  "b%D1 %l0"
  [(set_attr "type" "branch")])
 
;; Unconditional and other jump instructions.
 
(define_insn "jump"
  [(set (pc) (label_ref (match_operand 0 "" "")))]
  ""
  "b %l0"
  [(set_attr "type" "uncond_branch")])
 
(define_insn "indirect_jump"
  [(set (pc) (match_operand:SI 0 "gpr_operand" "r"))]
  ""
  "jr %0"
  [(set_attr "type" "uncond_branch")])
 
(define_expand "tablejump"
  [(parallel [(set (pc) (match_operand:SI 0 "gpr_operand" ""))
              (use (label_ref (match_operand 1 "" "")))])]
  ""
{
  /* In PIC mode, the table entries are stored PC relative.
     Convert the relative address to an absolute address.  */
  if (flag_pic)
    {
      rtx op1 = gen_rtx_LABEL_REF (Pmode, operands[1]);
 
      operands[0] = expand_simple_binop (Pmode, PLUS, operands[0],
                                         op1, NULL_RTX, 0, OPTAB_DIRECT);
    }
})
 
(define_insn "*tablejump_internal"
  [(set (pc) (match_operand:SI 0 "gpr_operand" "r"))
   (use (label_ref (match_operand 1 "" "")))]
  ""
  "jr %0;"
  [(set_attr "type" "uncond_branch")])
 
(define_insn "*tablejump_hi_internal"
  [(set (pc) (match_operand:HI 0 "gpr_operand" "r"))
   (use (label_ref (match_operand 1 "" "")))]
  "optimize_size && TARGET_SMALL16"
  "jr %0;"
  [(set_attr "type" "uncond_branch")])
 
 
(define_expand "call"
  ;; operands[1] is stack_size_rtx
  ;; operands[2] is next_arg_register
  [(parallel [(call (match_operand:SI 0 "call_operand" "")
                    (match_operand 1 "" ""))
             (clobber (reg:SI GPR_LR))])]
  ""
{
  bool target_uninterruptible = epiphany_call_uninterruptible_p (operands[0]);
 
  if (!call_operand (operands[1], VOIDmode))
    operands[0]
      = change_address (operands[0], VOIDmode,
                        copy_to_mode_reg (Pmode, XEXP (operands[0], 0)));
  if (epiphany_uninterruptible_p (current_function_decl)
      != target_uninterruptible)
    {
      emit_insn (target_uninterruptible ? gen_gid (): gen_gie ());
      emit_call_insn
        (gen_rtx_PARALLEL
          (VOIDmode,
           gen_rtvec (2, gen_rtx_CALL (VOIDmode, operands[0], operands[1]),
                         gen_rtx_CLOBBER (VOIDmode,
                                          gen_rtx_REG (SImode, GPR_LR)))));
      emit_insn (target_uninterruptible ? gen_gie (): gen_gid ());
      DONE;
    }
})
 
(define_insn "*call_i"
  [(match_parallel 2 "float_operation"
     [(call (mem:SI (match_operand:SI 0 "call_address_operand" "Csy,r"))
            (match_operand 1 "" ""))
      (clobber (reg:SI GPR_LR))])]
  ""
  "%f0"
  [(set_attr "type" "call")])
 
(define_expand "sibcall"
  ;; operands[1] is stack_size_rtx
  ;; operands[2] is next_arg_register
  [(parallel [(call (match_operand:SI 0 "call_operand" "")
                    (match_operand 1 "" ""))
             (return)])]
  ""
{
  bool target_uninterruptible = epiphany_call_uninterruptible_p (operands[0]);
 
  if (!call_operand (operands[1], VOIDmode))
    operands[0]
      = change_address (operands[0], VOIDmode,
                        copy_to_mode_reg (Pmode, XEXP (operands[0], 0)));
  if (epiphany_uninterruptible_p (current_function_decl)
      != target_uninterruptible)
    {
      emit_insn (target_uninterruptible ? gen_gid (): gen_gie ());
      emit_call_insn
        (gen_rtx_PARALLEL
          (VOIDmode,
           gen_rtvec (2, gen_rtx_CALL (VOIDmode, operands[0], operands[1]),
                         ret_rtx)));
      emit_insn (target_uninterruptible ? gen_gie (): gen_gid ());
      DONE;
    }
})
 
(define_insn "*sibcall_i"
  [(call (mem:SI (match_operand:SI 0 "call_address_operand" "Csy,Rsc"))
         (match_operand 1 "" ""))
   (return)]
  ""
  "@
   b %0
   jr %0"
  [(set_attr "type" "call")])
 
(define_expand "call_value"
  ;; operand 2 is stack_size_rtx
  ;; operand 3 is next_arg_register
  [(parallel [(set (match_operand 0 "gpr_operand" "=r")
                   (call (match_operand:SI 1 "call_operand" "")
                         (match_operand 2 "" "")))
             (clobber (reg:SI GPR_LR))])]
  ""
{
  bool target_uninterruptible = epiphany_call_uninterruptible_p (operands[1]);
 
  if (!call_operand (operands[1], VOIDmode))
    operands[1]
      = change_address (operands[1], VOIDmode,
                        copy_to_mode_reg (Pmode, XEXP (operands[1], 0)));
  if (epiphany_uninterruptible_p (current_function_decl)
      != target_uninterruptible)
    {
      emit_insn (target_uninterruptible ? gen_gid (): gen_gie ());
      emit_call_insn
        (gen_rtx_PARALLEL
          (VOIDmode,
           gen_rtvec (2, gen_rtx_SET
                           (VOIDmode, operands[0],
                            gen_rtx_CALL (VOIDmode, operands[1], operands[2])),
                         gen_rtx_CLOBBER (VOIDmode,
                                          gen_rtx_REG (SImode, GPR_LR)))));
      emit_insn (target_uninterruptible ? gen_gie (): gen_gid ());
      DONE;
    }
})
 
(define_insn "*call_value_i"
  [(match_parallel 3 "float_operation"
     [(set (match_operand 0 "gpr_operand" "=r,r")
           (call (mem:SI (match_operand:SI 1 "call_address_operand" "Csy,r"))
                 (match_operand 2 "" "")))
      (clobber (reg:SI GPR_LR))])]
  ""
  "%f1"
  [(set_attr "type" "call")
   (set_attr "length" "4")])
 
(define_expand "sibcall_value"
  ;; operand 2 is stack_size_rtx
  ;; operand 3 is next_arg_register
  [(parallel [(set (match_operand 0 "gpr_operand" "=r")
                   (call (match_operand:SI 1 "call_operand" "")
                         (match_operand 2 "" "")))
             (return)])]
  ""
{
  bool target_uninterruptible = epiphany_call_uninterruptible_p (operands[1]);
 
  if (!call_operand (operands[1], VOIDmode))
    operands[1]
      = change_address (operands[1], VOIDmode,
                        copy_to_mode_reg (Pmode, XEXP (operands[1], 0)));
  if (epiphany_uninterruptible_p (current_function_decl)
      != target_uninterruptible)
    {
      emit_insn (target_uninterruptible ? gen_gid (): gen_gie ());
      emit_call_insn
        (gen_rtx_PARALLEL
          (VOIDmode,
           gen_rtvec (2, gen_rtx_SET
                           (VOIDmode, operands[0],
                            gen_rtx_CALL (VOIDmode, operands[1], operands[2])),
                         ret_rtx)));
      emit_insn (target_uninterruptible ? gen_gie (): gen_gid ());
      DONE;
    }
})
 
(define_insn "*sibcall_value_i"
  [(set (match_operand 0 "gpr_operand" "=r,r")
        (call (mem:SI (match_operand:SI 1 "call_address_operand" "Csy,Rsc"))
              (match_operand 2 "" "")))
   (return)]
  ""
  "@
   b %1
   jr %1"
  [(set_attr "type" "call")
   (set_attr "length" "4")])
 
(define_expand "prologue"
  [(pc)]
  ""
{
  epiphany_expand_prologue ();
  DONE;
})
 
(define_expand "epilogue"
  [(pc)]
  ""
{
  epiphany_expand_epilogue (0);
  DONE;
})
 
(define_expand "sibcall_epilogue"
  [(pc)]
  ""
{
  epiphany_expand_epilogue (1);
  DONE;
})
 
; Since the demise of REG_N_SETS, it is no longer possible to find out
; in the prologue / epilogue expanders how many times lr is set.
; Using df_regs_ever_live_p to decide if lr needs saving means that
; any explicit use of lr will cause it to be saved; hence we cannot
; represent the blink use in return / sibcall instructions themselves, and
; instead have to show it in EPILOGUE_USES.
(define_insn "return_i"
  [(return)]
  "reload_completed"
  "rts"
  [(set_attr "type" "uncond_branch")])
 
(define_insn "return_internal_interrupt"
  [(return)
   (unspec_volatile [(const_int 0)] 1)]
  ""
  "rti"
  [(set_attr "type" "uncond_branch")])
 
(define_insn "stack_adjust_add"
  [(set (reg:SI GPR_SP)
        (plus:SI (reg:SI GPR_SP) (match_operand:SI 0 "arith_operand" "rL")))
   (clobber (reg:CC CC_REGNUM))
   (clobber (reg:SI STATUS_REGNUM))
   (clobber (match_operand:BLK 1 "memory_operand" "=m"))]
  "reload_completed"
  "add sp,sp,%0")
 
(define_insn "stack_adjust_mov"
  [(set (reg:SI GPR_SP) (reg:SI GPR_FP))
   (clobber (match_operand:BLK 0 "memory_operand" "=m"))]
  "reload_completed"
  "mov sp,fp"
  [(set_attr "type" "move")])
 
(define_insn "stack_adjust_str"
  [(set (match_operand 0 "stacktop_operand" "=m")
        (match_operand 1 "any_gpr_operand" "r"))
   (set (reg:SI GPR_SP)
        (plus:SI (reg:SI GPR_SP) (match_operand:SI 2 "nonmemory_operand" "rn")))
   (clobber (match_operand:BLK 3 "memory_operand" "=m"))]
  "reload_completed"
{
  return (GET_MODE_SIZE (GET_MODE (operands[0])) <= 4
          ? \"str %1,%0,%C2\" : \"strd %1,%0,%X2\");
}
  [(set_attr "type" "store")])
 
(define_insn "stack_adjust_ldr"
  [(set (match_operand:SI 0 "gpr_operand" "=r")
        (match_operand:SI 1 "stacktop_operand" "m"))
   (set (reg:SI GPR_SP)
        (plus:SI (reg:SI GPR_SP) (match_operand:SI 2 "nonmemory_operand" "rn")))
   (clobber (match_operand:BLK 3 "memory_operand" "=m"))]
  "reload_completed"
  "ldr %0,%1,%C2"
  [(set_attr "type" "load")])
 
;; Define some fake vector operations so that the vectorizer is happy to use
;; 64 bit loads/stores.
(define_expand "vec_unpacks_lo_v4hi"
  [(match_operand:V2SI 0 "gpr_operand")
   (match_operand:V4HI 1 "gpr_operand")]
  ""
{
  rtx in = simplify_gen_subreg (SImode, operands[1], V4HImode, 0);
  rtx outl = simplify_gen_subreg (SImode, operands[0], V2SImode, 0);
  rtx outh
    = simplify_gen_subreg (SImode, operands[0], V2SImode, UNITS_PER_WORD);
 
  if (reg_overlap_mentioned_p (outl, in))
    in = copy_to_mode_reg (SImode, in);
  emit_insn (gen_ashlsi3 (outl, in, GEN_INT (16)));
  emit_insn (gen_ashrsi3 (outl, outl, GEN_INT (16)));
  emit_insn (gen_ashrsi3 (outh, in, GEN_INT (16)));
  DONE;
})
 
(define_expand "vec_unpacks_hi_v4hi"
  [(match_operand:V2SI 0 "gpr_operand")
   (match_operand:V4HI 1 "gpr_operand")]
  ""
{
  rtx in = simplify_gen_subreg (SImode, operands[1], V4HImode, UNITS_PER_WORD);
  rtx outl = simplify_gen_subreg (SImode, operands[0], V2SImode, 0);
  rtx outh
    = simplify_gen_subreg (SImode, operands[0], V2SImode, UNITS_PER_WORD);
 
  if (reg_overlap_mentioned_p (outl, in))
    in = copy_to_mode_reg (SImode, in);
  emit_insn (gen_ashlsi3 (outl, in, GEN_INT (16)));
  emit_insn (gen_ashrsi3 (outl, outl, GEN_INT (16)));
  emit_insn (gen_ashrsi3 (outh, in, GEN_INT (16)));
  DONE;
})
 
(define_code_iterator addsub [plus minus])
 
(define_code_iterator alu_binop
  [plus minus and ior xor])
 
(define_code_attr insn_opname
  [(plus "add") (minus "sub") (mult "mul") (div "div")
   (and "and") (ior "ior") (xor "xor")])
 
; You might think that this would work better as a define_expand, but
; again lower_subreg pessimizes the code if it sees indiviudual operations.
; We need to keep inputs and outputs as register pairs if we want to
; get sensible register allocation for double-word load and store operations.
(define_insn_and_split "v2si3"
  [(set (match_operand:V2SI 0 "gpr_operand" "=r")
        (alu_binop:V2SI (match_operand:V2SI 1 "gpr_operand" "r")
                        (match_operand:V2SI 2 "gpr_operand" "r")))
   (clobber (reg:CC CC_REGNUM))]
  ""
  "#"
  "reload_completed || (epiphany_vect_align == 4 && TARGET_SPLIT_VECMOVE_EARLY)"
  [(const_int 0)]
{
  rtx o0l, o0h, o1l, o1h, o2l, o2h;
 
  o0l = simplify_gen_subreg (SImode, operands[0], V2SImode, 0);
  o0h = simplify_gen_subreg (SImode, operands[0], V2SImode, UNITS_PER_WORD);
  o1l = simplify_gen_subreg (SImode, operands[1], V2SImode, 0);
  o1h = simplify_gen_subreg (SImode, operands[1], V2SImode, UNITS_PER_WORD);
  o2l = simplify_gen_subreg (SImode, operands[2], V2SImode, 0);
  o2h = simplify_gen_subreg (SImode, operands[2], V2SImode, UNITS_PER_WORD);
  if (reg_overlap_mentioned_p (o0l, o1h))
    o1h = copy_to_mode_reg (SImode, o1h);
  if (reg_overlap_mentioned_p (o0l, o2h))
    o2h = copy_to_mode_reg (SImode, o2h);
  emit_insn (gen_si3 (o0l, o1l, o2l));
  emit_insn (gen_si3 (o0h, o1h, o2h));
  DONE;
}
  [(set_attr "length" "8")])
 
(define_expand "v2sf3"
  [(parallel
     [(set (match_operand:V2SF 0 "gpr_operand" "")
           (addsub:V2SF (match_operand:V2SF 1 "gpr_operand" "")
                        (match_operand:V2SF 2 "gpr_operand" "")))
      (clobber (reg:CC_FP CCFP_REGNUM))])])
 
(define_insn_and_split "v2sf3_i"
  [(match_parallel 3 "float_operation"
     [(set (match_operand:V2SF 0 "gpr_operand" "=r")
           (addsub:V2SF (match_operand:V2SF 1 "gpr_operand" "r")
                        (match_operand:V2SF 2 "gpr_operand" "r")))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "#"
  "reload_completed || (epiphany_vect_align == 4 && TARGET_SPLIT_VECMOVE_EARLY)"
  [(parallel
     [(set (match_dup 4) (addsub:SF (match_dup 5) (match_dup 6)))
      (clobber (reg:CC_FP CCFP_REGNUM))
      (match_dup 10)
      (match_dup 11)])
   (parallel
     [(set (match_dup 7) (addsub:SF (match_dup 8) (match_dup 9)))
      (clobber (reg:CC_FP CCFP_REGNUM))
      (match_dup 10)
      (match_dup 11)])]
{
  operands[4] = simplify_gen_subreg (SFmode, operands[0], V2SFmode, 0);
  operands[5] = simplify_gen_subreg (SFmode, operands[1], V2SFmode, 0);
  operands[6] = simplify_gen_subreg (SFmode, operands[2], V2SFmode, 0);
  operands[7]
    = simplify_gen_subreg (SFmode, operands[0], V2SFmode, UNITS_PER_WORD);
  operands[8]
    = simplify_gen_subreg (SFmode, operands[1], V2SFmode, UNITS_PER_WORD);
  operands[9]
    = simplify_gen_subreg (SFmode, operands[2], V2SFmode, UNITS_PER_WORD);
  if (!reload_completed)
    {
      if (reg_overlap_mentioned_p (operands[4], operands[8]))
        operands[8] = copy_to_mode_reg (SFmode, operands[8]);
      if (reg_overlap_mentioned_p (operands[4], operands[9]))
        operands[9] = copy_to_mode_reg (SFmode, operands[9]);
      emit_insn (gen_sf3 (operands[4], operands[5], operands[6]));
      emit_insn (gen_sf3 (operands[7], operands[8], operands[9]));
      DONE;
    }
  gcc_assert (!reg_overlap_mentioned_p (operands[4], operands[8]));
  gcc_assert (!reg_overlap_mentioned_p (operands[4], operands[9]));
  operands[10] = XVECEXP (operands[3], 0, XVECLEN (operands[3], 0) - 2);
  operands[11] = XVECEXP (operands[3], 0, XVECLEN (operands[3], 0) - 1);
}
  [(set_attr "length" "8")
   (set_attr "type" "fp")])
 
(define_expand "mul3"
  [(parallel
     [(set (match_operand:DWV2MODE 0 "gpr_operand" "")
           (mult:DWV2MODE (match_operand:DWV2MODE 1 "gpr_operand" "")
                          (match_operand:DWV2MODE 2 "gpr_operand" "")))
      (clobber (reg:CC_FP CCFP_REGNUM))])])
 
(define_insn_and_split "mul3_i"
  [(match_parallel 3 "float_operation"
     [(set (match_operand:DWV2MODE 0 "gpr_operand" "=r")
           (mult:DWV2MODE (match_operand:DWV2MODE 1 "gpr_operand" "r")
                          (match_operand:DWV2MODE 2 "gpr_operand" "r")))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  ""
  "#"
  "reload_completed || (epiphany_vect_align == 4 && TARGET_SPLIT_VECMOVE_EARLY)"
  [(parallel
     [(set (match_dup 4) (mult: (match_dup 5) (match_dup 6)))
      (clobber (reg:CC_FP CCFP_REGNUM))
      (match_dup 10)
      (match_dup 11)])
   (parallel
     [(set (match_dup 7) (mult: (match_dup 8) (match_dup 9)))
      (clobber (reg:CC_FP CCFP_REGNUM))
      (match_dup 10)
      (match_dup 11)])]
{
  operands[4]
    = simplify_gen_subreg (mode, operands[0], mode, 0);
  operands[5]
    = simplify_gen_subreg (mode, operands[1], mode, 0);
  operands[6]
    = simplify_gen_subreg (mode, operands[2], mode, 0);
  operands[7] = simplify_gen_subreg (mode, operands[0],
                                     mode, UNITS_PER_WORD);
  operands[8] = simplify_gen_subreg (mode, operands[1],
                                     mode, UNITS_PER_WORD);
  operands[9] = simplify_gen_subreg (mode, operands[2],
                                     mode, UNITS_PER_WORD);
  if (!reload_completed)
    {
      if (reg_overlap_mentioned_p (operands[4], operands[8]))
        operands[8] = copy_to_mode_reg (mode, operands[8]);
      if (reg_overlap_mentioned_p (operands[4], operands[9]))
        operands[9] = copy_to_mode_reg (mode, operands[9]);
      emit_insn (gen_mul3 (operands[4], operands[5], operands[6]));
      emit_insn (gen_mul3 (operands[7], operands[8], operands[9]));
      DONE;
    }
  gcc_assert (!reg_overlap_mentioned_p (operands[4], operands[8]));
  gcc_assert (!reg_overlap_mentioned_p (operands[4], operands[9]));
  operands[10] = XVECEXP (operands[3], 0, XVECLEN (operands[3], 0) - 2);
  operands[11] = XVECEXP (operands[3], 0, XVECLEN (operands[3], 0) - 1);
}
  [(set_attr "length" "8")
   (set_attr "type" "")])
 
(define_insn_and_split "*fmadd_combine"
  [(match_parallel 4 "float_operation"
     [(set (match_operand:DWV2MODE 0 "gpr_operand" "=r")
           (plus:DWV2MODE (mult:
                                (match_operand: 1 "gpr_operand" "r")
                                (match_operand: 2 "gpr_operand" "r"))
                          (match_operand: 3 "gpr_operand" "0")))
      (clobber (reg:CC_FP CCFP_REGNUM))])]
  "TARGET_FUSED_MADD || mode == V2SImode"
  "#"
  "reload_completed || (epiphany_vect_align == 4 && TARGET_SPLIT_VECMOVE_EARLY)"
  [(parallel
     [(set (match_dup 5)
           (plus: (mult: (match_dup 6) (match_dup 7))
                              (match_dup 8)))
      (clobber (reg:CC_FP CCFP_REGNUM))
      (match_dup 13)
      (match_dup 14)])
   (parallel
     [(set (match_dup 9)
           (plus: (mult: (match_dup 10) (match_dup 11))
                              (match_dup 12)))
      (clobber (reg:CC_FP CCFP_REGNUM))
      (match_dup 13)
      (match_dup 14)])]
{
  operands[5]
    = simplify_gen_subreg (mode, operands[0], mode, 0);
  operands[6]
    = simplify_gen_subreg (mode, operands[1], mode, 0);
  operands[7]
    = simplify_gen_subreg (mode, operands[2], mode, 0);
  operands[8]
    = simplify_gen_subreg (mode, operands[3], mode, 0);
  operands[9] = simplify_gen_subreg (mode, operands[0],
                                     mode, UNITS_PER_WORD);
  operands[10] = simplify_gen_subreg (mode, operands[1],
                                      mode, UNITS_PER_WORD);
  operands[11] = simplify_gen_subreg (mode, operands[2],
                                      mode, UNITS_PER_WORD);
  operands[12] = simplify_gen_subreg (mode, operands[3],
                                      mode, UNITS_PER_WORD);
  if (!reload_completed)
    {
      if (reg_overlap_mentioned_p (operands[5], operands[10]))
        operands[10] = copy_to_mode_reg (mode, operands[10]);
      if (reg_overlap_mentioned_p (operands[5], operands[11]))
        operands[11] = copy_to_mode_reg (mode, operands[11]);
      if (reg_overlap_mentioned_p (operands[5], operands[12]))
        operands[12] = copy_to_mode_reg (mode, operands[12]);
      emit_insn (gen_madd (operands[5], operands[6], operands[7],
                                       operands[8]));
      emit_insn (gen_madd (operands[9], operands[10], operands[11],
                                       operands[12]));
      DONE;
    }
  gcc_assert (!reg_overlap_mentioned_p (operands[5], operands[10]));
  gcc_assert (!reg_overlap_mentioned_p (operands[5], operands[11]));
  gcc_assert (!reg_overlap_mentioned_p (operands[5], operands[12]));
  operands[13] = XVECEXP (operands[4], 0, XVECLEN (operands[4], 0) - 2);
  operands[14] = XVECEXP (operands[4], 0, XVECLEN (operands[4], 0) - 1);
}
  [(set_attr "length" "8")
   (set_attr "type" "")])
 
(define_expand "vec_set"
  [(match_operand:DWV2MODE 0 "register_operand")
   (match_operand: 1 "register_operand")
   (match_operand 2 "const_int_operand" "")]
  ""
{
  operands[0]
    = simplify_gen_subreg (mode, operands[0], mode,
                           UNITS_PER_WORD * INTVAL (operands[2]));
  emit_move_insn (operands[0], operands[1]);
  DONE;
})
 
(define_insn "nop"
  [(const_int 0)]
  ""
  "nop"
  [(set_attr "type" "flow")])
Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [gcc/] [config/] [epiphany/] [epiphany.md] - Blame information for rev 713

Line No.	Rev	Author	Line
1	709	jeremybenn	`;; Machine description of the Adaptiva epiphany cpu for GNU C compiler`
2			`;; Copyright (C) 1994, 1997, 1998, 1999, 2000, 2004, 2005, 2007, 2009, 2010,`
3			`;; 2011 Free Software Foundation, Inc.`
4			`;; Contributed by Embecosm on behalf of Adapteva, Inc.`
5
6			`;; This file is part of GCC.`
7
8			`;; GCC is free software; you can redistribute it and/or modify`
9			`;; it under the terms of the GNU General Public License as published by`
10			`;; the Free Software Foundation; either version 3, or (at your option)`
11			`;; any later version.`
12
13			`;; GCC is distributed in the hope that it will be useful,`
14			`;; but WITHOUT ANY WARRANTY; without even the implied warranty of`
15			`;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
16			`;; GNU General Public License for more details.`
17
18			`;; You should have received a copy of the GNU General Public License`
19			`;; along with GCC; see the file COPYING3. If not see`
20			`;; .`
21
22			`;; See file "rtl.def" for documentation on define_insn, match_*, et. al.`
23
24			`(define_constants`
25			`[(GPR_0 0)`
26			`(GPR_FP 11)`
27			`(GPR_IP 12)`
28			`(GPR_SP 13)`
29			`(GPR_LR 14)`
30			`(GPR_16 16)`
31			`(GPR_18 18)`
32			`(GPR_20 20)`
33			`(ARG_POINTER_REGNUM 64)`
34			`(FRAME_POINTER_REGNUM 65)`
35			`(CC_REGNUM 66) ;; 66 or 17`
36			`(CCFP_REGNUM 67) ;; 67 or 18`
37			`(CONFIG_REGNUM 68)`
38			`(STATUS_REGNUM 69)`
39			`(LC_REGNUM 70)`
40			`(LS_REGNUM 71)`