Subversion Repositories openrisc

-- C460011.A

--

--                             Grant of Unlimited Rights

--

--     Under contracts F33600-87-D-0337, F33600-84-D-0280, MDA903-79-C-0687 and

--     F08630-91-C-0015, the U.S. Government obtained unlimited rights in the

--     software and documentation contained herein.  Unlimited rights are

--     defined in DFAR 252.227-7013(a)(19).  By making this public release,

--     the Government intends to confer upon all recipients unlimited rights

--     equal to those held by the Government.  These rights include rights to

--     use, duplicate, release or disclose the released technical data and

--     computer software in whole or in part, in any manner and for any purpose

--     whatsoever, and to have or permit others to do so.

--

--                                    DISCLAIMER

--

--     ALL MATERIALS OR INFORMATION HEREIN RELEASED, MADE AVAILABLE OR

--     DISCLOSED ARE AS IS.  THE GOVERNMENT MAKES NO EXPRESS OR IMPLIED

--     WARRANTY AS TO ANY MATTER WHATSOEVER, INCLUDING THE CONDITIONS OF THE

--     SOFTWARE, DOCUMENTATION OR OTHER INFORMATION RELEASED, MADE AVAILABLE

--     OR DISCLOSED, OR THE OWNERSHIP, MERCHANTABILITY, OR FITNESS FOR A

--     PARTICULAR PURPOSE OF SAID MATERIAL.

--*

--

-- OBJECTIVE:

--     Check that conversion of a decimal type to a modular type raises

--     Constraint_Error when the operand value is outside the base range

--     of the modular type.

--     Check that a conversion of a decimal type to an integer type

--     rounds correctly.

--

-- TEST DESCRIPTION:

--      Test conversion from decimal types to modular types.  Test

--      conversion to mod 255, mod 256 and mod 258 to test the boundaries

--      of 8 bit (+/-) unsigned numbers.

--      Test operand values that are negative, the value of the mod,

--      and greater than the value of the mod.

--      Declare a generic test procedure and instantiate it for each of the

--      unsigned types for each operand type.

--      Check that the operand is properly rounded during the conversion.

--

-- APPLICABILITY CRITERIA:

--      This test is applicable to all implementations which support

--      decimal types.

--

-- CHANGE HISTORY:

--      24 NOV 98   RLB  Split decimal cases from C460008 into this

--                       test, added conversions to integer types.

--      18 JAN 99   RLB  Repaired errors in test.

--

--!

------------------------------------------------------------------- C460011

with Report;

procedure C460011 is

  Shy_By_One   : constant := 2**8-1;

  Heavy_By_Two : constant := 2**8+2;

  type Unsigned_Edge_8 is mod Shy_By_One;

  type Unsigned_8_Bit  is mod 2**8;

  type Unsigned_Over_8 is mod Heavy_By_Two;

  type Signed_8_Bit is range -128 .. 127;

  type Signed_Over_8 is range -200 .. 200;

  NPC : constant String := " not properly converted";

  procedure Assert( Truth: Boolean; Message: String ) is

  begin

    if not Truth then

      Report.Failed(Message);

    end if;

  end Assert;

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  type Decim is delta 0.1 digits 5;    -- N/A => ERROR.

  generic

    type Source is delta <> digits <>;

    type Target is mod <>;

  procedure Decimal_Conversion_Check( For_The_Value : Source;

                                      Message       : String );

  procedure Decimal_Conversion_Check( For_The_Value : Source;

                                      Message       : String ) is

    Item : Target;

  begin

    Item := Target( For_The_Value );

    Report.Failed("Deci expected Constraint_Error " & Message);

    Report.Comment("Value of" & Target'Image(Item) & NPC);

  exception

    when Constraint_Error => null; -- expected case

    when others => Report.Failed("Deci raised wrong exception " & Message);

  end Decimal_Conversion_Check;

  procedure Decim_To_Short is

    new Decimal_Conversion_Check( Decim, Unsigned_Edge_8 );

  procedure Decim_To_Eight is

    new Decimal_Conversion_Check( Decim, Unsigned_8_Bit );

  procedure Decim_To_Wide is

    new Decimal_Conversion_Check( Decim, Unsigned_Over_8 );

  function Identity( Launder: Decim ) return Decim is

    Flat_Broke : constant Decim := 0.0;

  begin

    if Report.Ident_Bool( Launder = Flat_Broke ) then

      return Flat_Broke;

    else

      return Launder;

    end if;

  end Identity;

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

begin  -- Main test procedure.

  Report.Test ("C460011", "Check that conversion to " &

                          "a modular type raises Constraint_Error when " &

                          "the operand value is outside the base range " &

                          "of the modular type" );

  -- Decimal Error cases

  Decim_To_Short( Identity( -5.00 ), "M2S Dynamic, Negative" );

  Decim_To_Short( Shy_By_One * 1.0, "M2S Static,  At_Mod" );

  Decim_To_Short( 1995.9, "M2S Static,  Over_Mod" );

  Decim_To_Eight( -0.5, "M28 Static, Negative" );

  Decim_To_Eight( 2.0*128, "M28 Static,  At_Mod" );

  Decim_To_Eight( Identity( 2001.2 ), "M28 Dynamic, Over_Mod" );

  Decim_To_Wide ( Decim'First, "M2W Static,  Negative" );

  Decim_To_Wide ( Identity( 2*128.0 +2.0 ), "M2W Dynamic, At_Mod" );

  Decim_To_Wide ( Decim'Last, "M2W Static,  Over_Mod" );

  -- Check a few, correct, edge cases, for modular types.

  Eye_Dew: declare

    Sense     : Decim    := 0.00;

    Little   : Unsigned_Edge_8;

    Moderate : Unsigned_8_Bit;

    Big      : Unsigned_Over_8;

  begin

    Moderate := Unsigned_8_Bit (Sense);

    Assert( Moderate = 0, "Sense => Moderate, 0");

    Sense     := 2*128.0;

    Big := Unsigned_Over_8 (Sense);

    Assert( Big = 256, "Sense => Big, 256");

  end Eye_Dew;

  Rounding: declare

    Easy     : Decim  := Identity ( 2.0);

    Simple   : Decim  := Identity ( 2.1);

    Halfway  : Decim  := Identity ( 2.5);

    Upward   : Decim  := Identity ( 2.8);

    Chop     : Decim  := Identity (-2.2);

    Neg_Half : Decim  := Identity (-2.5);

    Downward : Decim  := Identity (-2.7);

    Little   : Unsigned_Edge_8;

    Moderate : Unsigned_8_Bit;

    Big      : Unsigned_Over_8;

    Also_Little:Signed_8_Bit;

    Also_Big : Signed_Over_8;

  begin

    Little := Unsigned_Edge_8 (Easy);

    Assert( Little = 2, "Easy => Little, 2");

    Moderate := Unsigned_8_Bit (Simple);

    Assert( Moderate = 2, "Simple => Moderate, 2");

    Big := Unsigned_Over_8 (Halfway); -- Rounds up by 4.6(33).

    Assert( Big = 3, "Halfway => Big, 3");

    Little := Unsigned_Edge_8 (Upward);

    Assert( Little = 3, "Upward => Little, 3");

    Also_Big := Signed_Over_8 (Halfway); -- Rounds up by 4.6(33).

    Assert( Also_Big = 3, "Halfway => Also_Big, 3");

    Also_Little := Signed_8_Bit (Chop);

    Assert( Also_Little = -2, "Chop => Also_Little, -2");

    Also_Big := Signed_Over_8 (Neg_Half); -- Rounds down by 4.6(33).

    Assert( Also_Big = -3, "Halfway => Also_Big, -3");

    Also_Little := Signed_8_Bit (Downward);

    Assert( Also_Little = -3, "Downward => Also_Little, -3");

  end Rounding;

  Report.Result;

end C460011;