URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [libffi/] [src/] [alpha/] [osf.S] - Blame information for rev 814

Go to most recent revision | Details | Compare with Previous | View Log


/* -----------------------------------------------------------------------
   osf.S - Copyright (c) 1998, 2001, 2007, 2008, 2011 Red Hat
 
   Alpha/OSF Foreign Function Interface
 
   Permission is hereby granted, free of charge, to any person obtaining
   a copy of this software and associated documentation files (the
   ``Software''), to deal in the Software without restriction, including
   without limitation the rights to use, copy, modify, merge, publish,
   distribute, sublicense, and/or sell copies of the Software, and to
   permit persons to whom the Software is furnished to do so, subject to
   the following conditions:
 
   The above copyright notice and this permission notice shall be included
   in all copies or substantial portions of the Software.
 
   THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
   NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
   HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
   WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
   OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
   DEALINGS IN THE SOFTWARE.
   ----------------------------------------------------------------------- */
 
#define LIBFFI_ASM
#include 
#include 
 
        .arch ev6
        .text
 
/* ffi_call_osf (void *args, unsigned long bytes, unsigned flags,
                 void *raddr, void (*fnaddr)(void));
 
   Bit o trickiness here -- ARGS+BYTES is the base of the stack frame
   for this function.  This has been allocated by ffi_call.  We also
   deallocate some of the stack that has been alloca'd.  */
 
        .align  3
        .globl  ffi_call_osf
        .ent    ffi_call_osf
        FFI_HIDDEN(ffi_call_osf)
 
ffi_call_osf:
        .frame  $15, 32, $26, 0
        .mask   0x4008000, -32
$LFB1:
        addq    $16,$17,$1
        mov     $16, $30
        stq     $26, 0($1)
        stq     $15, 8($1)
        stq     $18, 16($1)
        mov     $1, $15
$LCFI1:
        .prologue 0
 
        stq     $19, 24($1)
        mov     $20, $27
 
        # Load up all of the (potential) argument registers.
        ldq     $16, 0($30)
        ldt     $f16, 0($30)
        ldt     $f17, 8($30)
        ldq     $17, 8($30)
        ldt     $f18, 16($30)
        ldq     $18, 16($30)
        ldt     $f19, 24($30)
        ldq     $19, 24($30)
        ldt     $f20, 32($30)
        ldq     $20, 32($30)
        ldt     $f21, 40($30)
        ldq     $21, 40($30)
 
        # Deallocate the register argument area.
        lda     $30, 48($30)
 
        jsr     $26, ($27), 0
        ldgp    $29, 0($26)
 
        # If the return value pointer is NULL, assume no return value.
        ldq     $19, 24($15)
        ldq     $18, 16($15)
        ldq     $26, 0($15)
$LCFI2:
        beq     $19, $noretval
 
        # Store the return value out in the proper type.
        cmpeq   $18, FFI_TYPE_INT, $1
        bne     $1, $retint
        cmpeq   $18, FFI_TYPE_FLOAT, $2
        bne     $2, $retfloat
        cmpeq   $18, FFI_TYPE_DOUBLE, $3
        bne     $3, $retdouble
 
        .align  3
$noretval:
        ldq     $15, 8($15)
        ret
 
        .align  4
$retint:
        stq     $0, 0($19)
        nop
        ldq     $15, 8($15)
        ret
 
        .align  4
$retfloat:
        sts     $f0, 0($19)
        nop
        ldq     $15, 8($15)
        ret
 
        .align  4
$retdouble:
        stt     $f0, 0($19)
        nop
        ldq     $15, 8($15)
        ret
$LFE1:
 
        .end    ffi_call_osf
 
/* ffi_closure_osf(...)
 
   Receives the closure argument in $1.   */
 
        .align  3
        .globl  ffi_closure_osf
        .ent    ffi_closure_osf
        FFI_HIDDEN(ffi_closure_osf)
 
ffi_closure_osf:
        .frame  $30, 16*8, $26, 0
        .mask   0x4000000, -16*8
$LFB2:
        ldgp    $29, 0($27)
        subq    $30, 16*8, $30
$LCFI5:
        stq     $26, 0($30)
$LCFI6:
        .prologue 1
 
        # Store all of the potential argument registers in va_list format.
        stt     $f16, 4*8($30)
        stt     $f17, 5*8($30)
        stt     $f18, 6*8($30)
        stt     $f19, 7*8($30)
        stt     $f20, 8*8($30)
        stt     $f21, 9*8($30)
        stq     $16, 10*8($30)
        stq     $17, 11*8($30)
        stq     $18, 12*8($30)
        stq     $19, 13*8($30)
        stq     $20, 14*8($30)
        stq     $21, 15*8($30)
 
        # Call ffi_closure_osf_inner to do the bulk of the work.
        mov     $1, $16
        lda     $17, 2*8($30)
        lda     $18, 10*8($30)
        jsr     $26, ffi_closure_osf_inner
        ldgp    $29, 0($26)
        ldq     $26, 0($30)
 
        # Load up the return value in the proper type.
        lda     $1, $load_table
        s4addq  $0, $1, $1
        ldl     $1, 0($1)
        addq    $1, $29, $1
        jmp     $31, ($1), $load_32
 
        .align 4
$load_none:
        addq    $30, 16*8, $30
        ret
 
        .align 4
$load_float:
        lds     $f0, 16($30)
        nop
        addq    $30, 16*8, $30
        ret
 
        .align 4
$load_double:
        ldt     $f0, 16($30)
        nop
        addq    $30, 16*8, $30
        ret
 
        .align 4
$load_u8:
#ifdef __alpha_bwx__
        ldbu    $0, 16($30)
        nop
#else
        ldq     $0, 16($30)
        and     $0, 255, $0
#endif
        addq    $30, 16*8, $30
        ret
 
        .align 4
$load_s8:
#ifdef __alpha_bwx__
        ldbu    $0, 16($30)
        sextb   $0, $0
#else
        ldq     $0, 16($30)
        sll     $0, 56, $0
        sra     $0, 56, $0
#endif
        addq    $30, 16*8, $30
        ret
 
        .align 4
$load_u16:
#ifdef __alpha_bwx__
        ldwu    $0, 16($30)
        nop
#else
        ldq     $0, 16($30)
        zapnot  $0, 3, $0
#endif
        addq    $30, 16*8, $30
        ret
 
        .align 4
$load_s16:
#ifdef __alpha_bwx__
        ldwu    $0, 16($30)
        sextw   $0, $0
#else
        ldq     $0, 16($30)
        sll     $0, 48, $0
        sra     $0, 48, $0
#endif
        addq    $30, 16*8, $30
        ret
 
        .align 4
$load_32:
        ldl     $0, 16($30)
        nop
        addq    $30, 16*8, $30
        ret
 
        .align 4
$load_64:
        ldq     $0, 16($30)
        nop
        addq    $30, 16*8, $30
        ret
$LFE2:
 
        .end    ffi_closure_osf
 
#ifdef __ELF__
.section .rodata
#else
.rdata
#endif
$load_table:
        .gprel32 $load_none     # FFI_TYPE_VOID
        .gprel32 $load_32       # FFI_TYPE_INT
        .gprel32 $load_float    # FFI_TYPE_FLOAT
        .gprel32 $load_double   # FFI_TYPE_DOUBLE
        .gprel32 $load_none     # FFI_TYPE_LONGDOUBLE
        .gprel32 $load_u8       # FFI_TYPE_UINT8
        .gprel32 $load_s8       # FFI_TYPE_SINT8
        .gprel32 $load_u16      # FFI_TYPE_UINT16
        .gprel32 $load_s16      # FFI_TYPE_SINT16
        .gprel32 $load_32       # FFI_TYPE_UINT32
        .gprel32 $load_32       # FFI_TYPE_SINT32
        .gprel32 $load_64       # FFI_TYPE_UINT64
        .gprel32 $load_64       # FFI_TYPE_SINT64
        .gprel32 $load_none     # FFI_TYPE_STRUCT
        .gprel32 $load_64       # FFI_TYPE_POINTER
 
/* Assert that the table above is in sync with ffi.h.  */
 
#if        FFI_TYPE_FLOAT != 2          \
        || FFI_TYPE_DOUBLE != 3         \
        || FFI_TYPE_UINT8 != 5          \
        || FFI_TYPE_SINT8 != 6          \
        || FFI_TYPE_UINT16 != 7         \
        || FFI_TYPE_SINT16 != 8         \
        || FFI_TYPE_UINT32 != 9         \
        || FFI_TYPE_SINT32 != 10        \
        || FFI_TYPE_UINT64 != 11        \
        || FFI_TYPE_SINT64 != 12        \
        || FFI_TYPE_STRUCT != 13        \
        || FFI_TYPE_POINTER != 14       \
        || FFI_TYPE_LAST != 14
#error "osf.S out of sync with ffi.h"
#endif
 
#ifdef __ELF__
# define UA_SI          .4byte
# define FDE_ENCODING   0x1b    /* pcrel sdata4 */
# define FDE_ENCODE(X)  .4byte X-.
# define FDE_ARANGE(X)  .4byte X
#elif defined __osf__
# define UA_SI          .align 0; .long
# define FDE_ENCODING   0x50    /* aligned absolute */
# define FDE_ENCODE(X)  .align 3; .quad X
# define FDE_ARANGE(X)  .align 0; .quad X
#endif
 
#ifdef __ELF__
        .section        .eh_frame,EH_FRAME_FLAGS,@progbits
#elif defined __osf__
        .data
        .align 3
        .globl _GLOBAL__F_ffi_call_osf
_GLOBAL__F_ffi_call_osf:
#endif
__FRAME_BEGIN__:
        UA_SI   $LECIE1-$LSCIE1 # Length of Common Information Entry
$LSCIE1:
        UA_SI   0x0             # CIE Identifier Tag
        .byte   0x1             # CIE Version
        .ascii "zR\0"           # CIE Augmentation
        .byte   0x1             # uleb128 0x1; CIE Code Alignment Factor
        .byte   0x78            # sleb128 -8; CIE Data Alignment Factor
        .byte   26              # CIE RA Column
        .byte   0x1             # uleb128 0x1; Augmentation size
        .byte   FDE_ENCODING    # FDE Encoding
        .byte   0xc             # DW_CFA_def_cfa
        .byte   30              # uleb128 column 30
        .byte   0                # uleb128 offset 0
        .align 3
$LECIE1:
$LSFDE1:
        UA_SI   $LEFDE1-$LASFDE1                # FDE Length
$LASFDE1:
        UA_SI   $LASFDE1-__FRAME_BEGIN__        # FDE CIE offset
        FDE_ENCODE($LFB1)                       # FDE initial location
        FDE_ARANGE($LFE1-$LFB1)                 # FDE address range
        .byte   0x0             # uleb128 0x0; Augmentation size
 
        .byte   0x4             # DW_CFA_advance_loc4
        UA_SI   $LCFI1-$LFB1
        .byte   0x9a            # DW_CFA_offset, column 26
        .byte   4               # uleb128 4*-8
        .byte   0x8f            # DW_CFA_offset, column 15
        .byte   0x3             # uleb128 3*-8
        .byte   0xc             # DW_CFA_def_cfa
        .byte   15              # uleb128 column 15
        .byte   32              # uleb128 offset 32
 
        .byte   0x4             # DW_CFA_advance_loc4
        UA_SI   $LCFI2-$LCFI1
        .byte   0xda            # DW_CFA_restore, column 26
        .align 3
$LEFDE1:
 
$LSFDE3:
        UA_SI   $LEFDE3-$LASFDE3                # FDE Length
$LASFDE3:
        UA_SI   $LASFDE3-__FRAME_BEGIN__        # FDE CIE offset
        FDE_ENCODE($LFB2)                       # FDE initial location
        FDE_ARANGE($LFE2-$LFB2)                 # FDE address range
        .byte   0x0             # uleb128 0x0; Augmentation size
 
        .byte   0x4             # DW_CFA_advance_loc4
        UA_SI   $LCFI5-$LFB2
        .byte   0xe             # DW_CFA_def_cfa_offset
        .byte   0x80,0x1        # uleb128 128
 
        .byte   0x4             # DW_CFA_advance_loc4
        UA_SI   $LCFI6-$LCFI5
        .byte   0x9a            # DW_CFA_offset, column 26
        .byte   16              # uleb128 offset 16*-8
        .align 3
$LEFDE3:
#if defined __osf__
        .align 0
        .long   0                # End of Table
#endif
 
#if defined __ELF__ && defined __linux__
        .section        .note.GNU-stack,"",@progbits
#endif

Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [libffi/] [src/] [alpha/] [osf.S] - Blame information for rev 814

Line No.	Rev	Author	Line
1	732	jeremybenn	`/* -----------------------------------------------------------------------`
2			`osf.S - Copyright (c) 1998, 2001, 2007, 2008, 2011 Red Hat`
3
4			`Alpha/OSF Foreign Function Interface`
5
6			`Permission is hereby granted, free of charge, to any person obtaining`
7			`a copy of this software and associated documentation files (the`
8			``Software''), to deal in the Software without restriction, including
9			`without limitation the rights to use, copy, modify, merge, publish,`
10			`distribute, sublicense, and/or sell copies of the Software, and to`
11			`permit persons to whom the Software is furnished to do so, subject to`
12			`the following conditions:`
13
14			`The above copyright notice and this permission notice shall be included`
15			`in all copies or substantial portions of the Software.`
16
17			THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
18			`EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF`
19			`MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND`
20			`NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT`
21			`HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,`
22			`WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,`
23			`OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER`
24			`DEALINGS IN THE SOFTWARE.`
25			`----------------------------------------------------------------------- */`
26
27			`#define LIBFFI_ASM`
28			`#include`
29			`#include`
30
31			`.arch ev6`
32			`.text`
33
34			`/* ffi_call_osf (void *args, unsigned long bytes, unsigned flags,`
35			`void raddr, void (fnaddr)(void));`
36
37			`Bit o trickiness here -- ARGS+BYTES is the base of the stack frame`
38			`for this function. This has been allocated by ffi_call. We also`
39			`deallocate some of the stack that has been alloca'd. */`
40
41			`.align 3`
42			`.globl ffi_call_osf`
43			`.ent ffi_call_osf`
44			`FFI_HIDDEN(ffi_call_osf)`
45
46			`ffi_call_osf:`
47			`.frame $15, 32, $26, 0`
48			`.mask 0x4008000, -32`
49			`$LFB1:`
50			`addq $16,$17,$1`
51			`mov $16, $30`
52			`stq $26, 0($1)`
53			`stq $15, 8($1)`
54			`stq $18, 16($1)`
55			`mov $1, $15`
56			`$LCFI1:`
57			`.prologue 0`
58
59			`stq $19, 24($1)`
60			`mov $20, $27`
61
62			`# Load up all of the (potential) argument registers.`
63			`ldq $16, 0($30)`
64			`ldt $f16, 0($30)`
65			`ldt $f17, 8($30)`
66			`ldq $17, 8($30)`
67			`ldt $f18, 16($30)`
68			`ldq $18, 16($30)`
69			`ldt $f19, 24($30)`
70			`ldq $19, 24($30)`
71			`ldt $f20, 32($30)`
72			`ldq $20, 32($30)`
73			`ldt $f21, 40($30)`
74			`ldq $21, 40($30)`
75
76			`# Deallocate the register argument area.`
77			`lda $30, 48($30)`
78
79			`jsr $26, ($27), 0`
80			`ldgp $29, 0($26)`
81
82			`# If the return value pointer is NULL, assume no return value.`
83			`ldq $19, 24($15)`
84			`ldq $18, 16($15)`
85			`ldq $26, 0($15)`
86			`$LCFI2:`
87			`beq $19, $noretval`
88
89			`# Store the return value out in the proper type.`
90			`cmpeq $18, FFI_TYPE_INT, $1`
91			`bne $1, $retint`
92			`cmpeq $18, FFI_TYPE_FLOAT, $2`
93			`bne $2, $retfloat`
94			`cmpeq $18, FFI_TYPE_DOUBLE, $3`
95			`bne $3, $retdouble`
96
97			`.align 3`
98			`$noretval:`
99			`ldq $15, 8($15)`
100			`ret`
101
102			`.align 4`
103			`$retint:`
104			`stq $0, 0($19)`
105			`nop`
106			`ldq $15, 8($15)`
107			`ret`
108
109			`.align 4`
110			`$retfloat:`
111			`sts $f0, 0($19)`
112			`nop`
113			`ldq $15, 8($15)`
114			`ret`
115
116			`.align 4`
117			`$retdouble:`
118			`stt $f0, 0($19)`
119			`nop`
120			`ldq $15, 8($15)`
121			`ret`
122			`$LFE1:`
123
124			`.end ffi_call_osf`
125
126			`/* ffi_closure_osf(...)`
127
128			`Receives the closure argument in $1. */`
129
130			`.align 3`
131			`.globl ffi_closure_osf`
132			`.ent ffi_closure_osf`
133			`FFI_HIDDEN(ffi_closure_osf)`
134
135			`ffi_closure_osf:`
136			`.frame $30, 16*8, $26, 0`
137			`.mask 0x4000000, -16*8`
138			`$LFB2:`
139			`ldgp $29, 0($27)`
140			`subq $30, 16*8, $30`
141			`$LCFI5:`
142			`stq $26, 0($30)`
143			`$LCFI6:`
144			`.prologue 1`
145
146			`# Store all of the potential argument registers in va_list format.`
147			`stt $f16, 4*8($30)`
148			`stt $f17, 5*8($30)`
149			`stt $f18, 6*8($30)`
150			`stt $f19, 7*8($30)`
151			`stt $f20, 8*8($30)`
152			`stt $f21, 9*8($30)`
153			`stq $16, 10*8($30)`
154			`stq $17, 11*8($30)`
155			`stq $18, 12*8($30)`
156			`stq $19, 13*8($30)`
157			`stq $20, 14*8($30)`
158			`stq $21, 15*8($30)`
159
160			`# Call ffi_closure_osf_inner to do the bulk of the work.`
161			`mov $1, $16`
162			`lda $17, 2*8($30)`
163			`lda $18, 10*8($30)`
164			`jsr $26, ffi_closure_osf_inner`
165			`ldgp $29, 0($26)`
166			`ldq $26, 0($30)`
167
168			`# Load up the return value in the proper type.`
169			`lda $1, $load_table`
170			`s4addq $0, $1, $1`
171			`ldl $1, 0($1)`
172			`addq $1, $29, $1`
173			`jmp $31, ($1), $load_32`
174
175			`.align 4`
176			`$load_none:`
177			`addq $30, 16*8, $30`
178			`ret`
179
180			`.align 4`
181			`$load_float:`
182			`lds $f0, 16($30)`
183			`nop`
184			`addq $30, 16*8, $30`
185			`ret`
186
187			`.align 4`
188			`$load_double:`
189			`ldt $f0, 16($30)`
190			`nop`
191			`addq $30, 16*8, $30`
192			`ret`
193
194			`.align 4`
195			`$load_u8:`
196			`#ifdef __alpha_bwx__`
197			`ldbu $0, 16($30)`
198			`nop`
199			`#else`
200			`ldq $0, 16($30)`
201			`and $0, 255, $0`
202			`#endif`
203			`addq $30, 16*8, $30`
204			`ret`
205
206			`.align 4`
207			`$load_s8:`
208			`#ifdef __alpha_bwx__`
209			`ldbu $0, 16($30)`
210			`sextb $0, $0`
211			`#else`
212			`ldq $0, 16($30)`
213			`sll $0, 56, $0`
214			`sra $0, 56, $0`
215			`#endif`
216			`addq $30, 16*8, $30`
217			`ret`
218
219			`.align 4`
220			`$load_u16:`
221			`#ifdef __alpha_bwx__`
222			`ldwu $0, 16($30)`
223			`nop`
224			`#else`
225			`ldq $0, 16($30)`
226			`zapnot $0, 3, $0`
227			`#endif`
228			`addq $30, 16*8, $30`
229			`ret`
230
231			`.align 4`
232			`$load_s16:`
233			`#ifdef __alpha_bwx__`
234			`ldwu $0, 16($30)`
235			`sextw $0, $0`
236			`#else`
237			`ldq $0, 16($30)`
238			`sll $0, 48, $0`
239			`sra $0, 48, $0`
240			`#endif`
241			`addq $30, 16*8, $30`
242			`ret`
243
244			`.align 4`
245			`$load_32:`
246			`ldl $0, 16($30)`
247			`nop`
248			`addq $30, 16*8, $30`
249			`ret`
250
251			`.align 4`
252			`$load_64:`
253			`ldq $0, 16($30)`
254			`nop`
255			`addq $30, 16*8, $30`
256			`ret`
257			`$LFE2:`
258
259			`.end ffi_closure_osf`
260
261			`#ifdef __ELF__`
262			`.section .rodata`
263			`#else`
264			`.rdata`
265			`#endif`
266			`$load_table:`
267			`.gprel32 $load_none # FFI_TYPE_VOID`
268			`.gprel32 $load_32 # FFI_TYPE_INT`
269			`.gprel32 $load_float # FFI_TYPE_FLOAT`
270			`.gprel32 $load_double # FFI_TYPE_DOUBLE`
271			`.gprel32 $load_none # FFI_TYPE_LONGDOUBLE`
272			`.gprel32 $load_u8 # FFI_TYPE_UINT8`
273			`.gprel32 $load_s8 # FFI_TYPE_SINT8`
274			`.gprel32 $load_u16 # FFI_TYPE_UINT16`
275			`.gprel32 $load_s16 # FFI_TYPE_SINT16`
276			`.gprel32 $load_32 # FFI_TYPE_UINT32`
277			`.gprel32 $load_32 # FFI_TYPE_SINT32`
278			`.gprel32 $load_64 # FFI_TYPE_UINT64`
279			`.gprel32 $load_64 # FFI_TYPE_SINT64`
280			`.gprel32 $load_none # FFI_TYPE_STRUCT`
281			`.gprel32 $load_64 # FFI_TYPE_POINTER`
282
283			`/* Assert that the table above is in sync with ffi.h. */`
284
285			`#if FFI_TYPE_FLOAT != 2 \`
286			`\|\| FFI_TYPE_DOUBLE != 3 \`
287			`\|\| FFI_TYPE_UINT8 != 5 \`
288			`\|\| FFI_TYPE_SINT8 != 6 \`
289			`\|\| FFI_TYPE_UINT16 != 7 \`
290			`\|\| FFI_TYPE_SINT16 != 8 \`
291			`\|\| FFI_TYPE_UINT32 != 9 \`
292			`\|\| FFI_TYPE_SINT32 != 10 \`
293			`\|\| FFI_TYPE_UINT64 != 11 \`
294			`\|\| FFI_TYPE_SINT64 != 12 \`
295			`\|\| FFI_TYPE_STRUCT != 13 \`
296			`\|\| FFI_TYPE_POINTER != 14 \`
297			`\|\| FFI_TYPE_LAST != 14`
298			`#error "osf.S out of sync with ffi.h"`
299			`#endif`
300
301			`#ifdef __ELF__`
302			`# define UA_SI .4byte`
303			`# define FDE_ENCODING 0x1b /* pcrel sdata4 */`
304			`# define FDE_ENCODE(X) .4byte X-.`
305			`# define FDE_ARANGE(X) .4byte X`
306			`#elif defined __osf__`
307			`# define UA_SI .align 0; .long`
308			`# define FDE_ENCODING 0x50 /* aligned absolute */`
309			`# define FDE_ENCODE(X) .align 3; .quad X`
310			`# define FDE_ARANGE(X) .align 0; .quad X`
311			`#endif`
312
313			`#ifdef __ELF__`
314			`.section .eh_frame,EH_FRAME_FLAGS,@progbits`
315			`#elif defined __osf__`
316			`.data`
317			`.align 3`
318			`.globl _GLOBAL__F_ffi_call_osf`
319			`_GLOBAL__F_ffi_call_osf:`
320			`#endif`
321			`__FRAME_BEGIN__:`
322			`UA_SI $LECIE1-$LSCIE1 # Length of Common Information Entry`
323			`$LSCIE1:`
324			`UA_SI 0x0 # CIE Identifier Tag`
325			`.byte 0x1 # CIE Version`
326			`.ascii "zR\0" # CIE Augmentation`
327			`.byte 0x1 # uleb128 0x1; CIE Code Alignment Factor`
328			`.byte 0x78 # sleb128 -8; CIE Data Alignment Factor`
329			`.byte 26 # CIE RA Column`
330			`.byte 0x1 # uleb128 0x1; Augmentation size`
331			`.byte FDE_ENCODING # FDE Encoding`
332			`.byte 0xc # DW_CFA_def_cfa`
333			`.byte 30 # uleb128 column 30`
334			`.byte 0 # uleb128 offset 0`
335			`.align 3`
336			`$LECIE1:`
337			`$LSFDE1:`
338			`UA_SI $LEFDE1-$LASFDE1 # FDE Length`
339			`$LASFDE1:`
340			`UA_SI $LASFDE1-__FRAME_BEGIN__ # FDE CIE offset`
341			`FDE_ENCODE($LFB1) # FDE initial location`
342			`FDE_ARANGE($LFE1-$LFB1) # FDE address range`
343			`.byte 0x0 # uleb128 0x0; Augmentation size`
344
345			`.byte 0x4 # DW_CFA_advance_loc4`
346			`UA_SI $LCFI1-$LFB1`
347			`.byte 0x9a # DW_CFA_offset, column 26`
348			`.byte 4 # uleb128 4*-8`
349			`.byte 0x8f # DW_CFA_offset, column 15`
350			`.byte 0x3 # uleb128 3*-8`
351			`.byte 0xc # DW_CFA_def_cfa`
352			`.byte 15 # uleb128 column 15`
353			`.byte 32 # uleb128 offset 32`
354
355			`.byte 0x4 # DW_CFA_advance_loc4`
356			`UA_SI $LCFI2-$LCFI1`
357			`.byte 0xda # DW_CFA_restore, column 26`
358			`.align 3`
359			`$LEFDE1:`
360
361			`$LSFDE3:`
362			`UA_SI $LEFDE3-$LASFDE3 # FDE Length`
363			`$LASFDE3:`
364			`UA_SI $LASFDE3-__FRAME_BEGIN__ # FDE CIE offset`
365			`FDE_ENCODE($LFB2) # FDE initial location`
366			`FDE_ARANGE($LFE2-$LFB2) # FDE address range`
367			`.byte 0x0 # uleb128 0x0; Augmentation size`
368
369			`.byte 0x4 # DW_CFA_advance_loc4`
370			`UA_SI $LCFI5-$LFB2`
371			`.byte 0xe # DW_CFA_def_cfa_offset`
372			`.byte 0x80,0x1 # uleb128 128`
373
374			`.byte 0x4 # DW_CFA_advance_loc4`
375			`UA_SI $LCFI6-$LCFI5`
376			`.byte 0x9a # DW_CFA_offset, column 26`
377			`.byte 16 # uleb128 offset 16*-8`
378			`.align 3`
379			`$LEFDE3:`
380			`#if defined __osf__`
381			`.align 0`
382			`.long 0 # End of Table`
383			`#endif`
384
385			`#if defined __ELF__ && defined __linux__`
386			`.section .note.GNU-stack,"",@progbits`
387			`#endif`