URL https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [libjava/] [libltdl/] [ltmain.sh] - Blame information for rev 851

Go to most recent revision | Details | Compare with Previous | View Log

# ltmain.sh - Provide generalized library-building support services.
# NOTE: Changing this file will not affect anything until you rerun configure.
#
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
# Free Software Foundation, Inc.
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
 
basename="s,^.*/,,g"
 
# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
# is ksh but when the shell is invoked as "sh" and the current value of
# the _XPG environment variable is not equal to 1 (one), the special
# positional parameter $0, within a function call, is the name of the
# function.
progpath="$0"
 
# The name of this program:
progname=`echo "$progpath" | $SED $basename`
modename="$progname"
 
# Global variables:
EXIT_SUCCESS=0
EXIT_FAILURE=1
 
PROGRAM=ltmain.sh
PACKAGE=libtool
VERSION=1.5.16
TIMESTAMP=" (1.1220.2.235 2005/04/25 18:13:26)"
 
# See if we are running on zsh, and set the options which allow our
# commands through without removal of \ escapes.
if test -n "${ZSH_VERSION+set}" ; then
  setopt NO_GLOB_SUBST
fi
 
# Check that we have a working $echo.
if test "X$1" = X--no-reexec; then
  # Discard the --no-reexec flag, and continue.
  shift
elif test "X$1" = X--fallback-echo; then
  # Avoid inline document here, it may be left over
  :
elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
  # Yippee, $echo works!
  :
else
  # Restart under the correct shell, and then maybe $echo will work.
  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
fi
 
if test "X$1" = X--fallback-echo; then
  # used as fallback echo
  shift
  cat <<EOF
$*
EOF
  exit $EXIT_SUCCESS
fi
 
default_mode=
help="Try \`$progname --help' for more information."
magic="%%%MAGIC variable%%%"
mkdir="mkdir"
mv="mv -f"
rm="rm -f"
 
# Sed substitution that helps us do robust quoting.  It backslashifies
# metacharacters that are still active within double-quoted strings.
Xsed="${SED}"' -e 1s/^X//'
sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
# test EBCDIC or ASCII
case `echo A|tr A '\301'` in
 A) # EBCDIC based system
  SP2NL="tr '\100' '\n'"
  NL2SP="tr '\r\n' '\100\100'"
  ;;
 *) # Assume ASCII based system
  SP2NL="tr '\040' '\012'"
  NL2SP="tr '\015\012' '\040\040'"
  ;;
esac
 
# NLS nuisances.
# Only set LANG and LC_ALL to C if already set.
# These must not be set unconditionally because not all systems understand
# e.g. LANG=C (notably SCO).
# We save the old values to restore during execute mode.
if test "${LC_ALL+set}" = set; then
  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
fi
if test "${LANG+set}" = set; then
  save_LANG="$LANG"; LANG=C; export LANG
fi
 
# Make sure IFS has a sensible default
lt_nl='
'
IFS="   $lt_nl"
 
if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
  $echo "$modename: not configured to build any kind of library" 1>&2
  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
  exit $EXIT_FAILURE
fi
 
# Global variables.
mode=$default_mode
nonopt=
prev=
prevopt=
run=
show="$echo"
show_help=
execute_dlfiles=
lo2o="s/\\.lo\$/.${objext}/"
o2lo="s/\\.${objext}\$/.lo/"
quote_scanset='[[~#^*{};<>?'"'"'        ]'
 
#####################################
# Shell function definitions:
# This seems to be the best place for them
 
# func_win32_libid arg
# return the library type of file 'arg'
#
# Need a lot of goo to handle *both* DLLs and import libs
# Has to be a shell function in order to 'eat' the argument
# that is supplied when $file_magic_command is called.
func_win32_libid ()
{
  win32_libid_type="unknown"
  win32_fileres=`file -L $1 2>/dev/null`
  case $win32_fileres in
  *ar\ archive\ import\ library*) # definitely import
    win32_libid_type="x86 archive import"
    ;;
  *ar\ archive*) # could be an import, or static
    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
      $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
      win32_nmres=`eval $NM -f posix -A $1 | \
        sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'`
      if test "X$win32_nmres" = "Ximport" ; then
        win32_libid_type="x86 archive import"
      else
        win32_libid_type="x86 archive static"
      fi
    fi
    ;;
  *DLL*)
    win32_libid_type="x86 DLL"
    ;;
  *executable*) # but shell scripts are "executable" too...
    case $win32_fileres in
    *MS\ Windows\ PE\ Intel*)
      win32_libid_type="x86 DLL"
      ;;
    esac
    ;;
  esac
  $echo $win32_libid_type
}
 
 
# func_infer_tag arg
# Infer tagged configuration to use if any are available and
# if one wasn't chosen via the "--tag" command line option.
# Only attempt this if the compiler in the base compile
# command doesn't match the default compiler.
# arg is usually of the form 'gcc ...'
func_infer_tag ()
{
    if test -n "$available_tags" && test -z "$tagname"; then
      CC_quoted=
      for arg in $CC; do
        case $arg in
          *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
          arg="\"$arg\""
          ;;
        esac
        CC_quoted="$CC_quoted $arg"
      done
      case $@ in
      # Blanks in the command may have been stripped by the calling shell,
      # but not from the CC environment variable when configure was run.
      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
      # Blanks at the start of $base_compile will cause this to fail
      # if we don't check for them as well.
      *)
        for z in $available_tags; do
          if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
            # Evaluate the configuration.
            eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
            CC_quoted=
            for arg in $CC; do
            # Double-quote args containing other shell metacharacters.
            case $arg in
              *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
              arg="\"$arg\""
              ;;
            esac
            CC_quoted="$CC_quoted $arg"
          done
            case "$@ " in
              " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
              # The compiler in the base compile command matches
              # the one in the tagged configuration.
              # Assume this is the tagged configuration we want.
              tagname=$z
              break
              ;;
            esac
          fi
        done
        # If $tagname still isn't set, then no tagged configuration
        # was found and let the user know that the "--tag" command
        # line option must be used.
        if test -z "$tagname"; then
          $echo "$modename: unable to infer tagged configuration"
          $echo "$modename: specify a tag with \`--tag'" 1>&2
          exit $EXIT_FAILURE
#        else
#          $echo "$modename: using $tagname tagged configuration"
        fi
        ;;
      esac
    fi
}
 
 
# func_extract_an_archive dir oldlib
func_extract_an_archive ()
{
    f_ex_an_ar_dir="$1"; shift
    f_ex_an_ar_oldlib="$1"
 
    $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
    $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
     :
    else
      $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
      exit $EXIT_FAILURE
    fi
}
 
# func_extract_archives gentop oldlib ...
func_extract_archives ()
{
    my_gentop="$1"; shift
    my_oldlibs=${1+"$@"}
    my_oldobjs=""
    my_xlib=""
    my_xabs=""
    my_xdir=""
    my_status=""
 
    $show "${rm}r $my_gentop"
    $run ${rm}r "$my_gentop"
    $show "$mkdir $my_gentop"
    $run $mkdir "$my_gentop"
    my_status=$?
    if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
      exit $my_status
    fi
 
    for my_xlib in $my_oldlibs; do
      # Extract the objects.
      case $my_xlib in
        [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
        *) my_xabs=`pwd`"/$my_xlib" ;;
      esac
      my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
      my_xdir="$my_gentop/$my_xlib"
 
      $show "${rm}r $my_xdir"
      $run ${rm}r "$my_xdir"
      $show "$mkdir $my_xdir"
      $run $mkdir "$my_xdir"
      status=$?
      if test "$status" -ne 0 && test ! -d "$my_xdir"; then
        exit $status
      fi
      case $host in
      *-darwin*)
        $show "Extracting $my_xabs"
        # Do not bother doing anything if just a dry run
        if test -z "$run"; then
          darwin_orig_dir=`pwd`
          cd $my_xdir || exit $?
          darwin_archive=$my_xabs
          darwin_curdir=`pwd`
          darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
          darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
          if test -n "$darwin_arches"; then
            darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
            darwin_arch=
            $show "$darwin_base_archive has multiple architectures $darwin_arches"
            for darwin_arch in  $darwin_arches ; do
              mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
              lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
              cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
              func_extract_an_archive "`pwd`" "${darwin_base_archive}"
              cd "$darwin_curdir"
              $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
            done # $darwin_arches
      ## Okay now we have a bunch of thin objects, gotta fatten them up :)
            darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
            darwin_file=
            darwin_files=
            for darwin_file in $darwin_filelist; do
              darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
              lipo -create -output "$darwin_file" $darwin_files
            done # $darwin_filelist
            ${rm}r unfat-$$
            cd "$darwin_orig_dir"
          else
            cd "$darwin_orig_dir"
            func_extract_an_archive "$my_xdir" "$my_xabs"
          fi # $darwin_arches
        fi # $run
      ;;
      *)
        func_extract_an_archive "$my_xdir" "$my_xabs"
        ;;
      esac
      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
    done
    func_extract_archives_result="$my_oldobjs"
}
# End of Shell function definitions
#####################################
 
# Darwin sucks
eval std_shrext=\"$shrext_cmds\"
 
# Parse our command line options once, thoroughly.
while test "$#" -gt 0
do
  arg="$1"
  shift
 
  case $arg in
  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
  *) optarg= ;;
  esac
 
  # If the previous option needs an argument, assign it.
  if test -n "$prev"; then
    case $prev in
    execute_dlfiles)
      execute_dlfiles="$execute_dlfiles $arg"
      ;;
    tag)
      tagname="$arg"
      preserve_args="${preserve_args}=$arg"
 
      # Check whether tagname contains only valid characters
      case $tagname in
      *[!-_A-Za-z0-9,/]*)
        $echo "$progname: invalid tag name: $tagname" 1>&2
        exit $EXIT_FAILURE
        ;;
      esac
 
      case $tagname in
      CC)
        # Don't test for the "default" C tag, as we know, it's there, but
        # not specially marked.
        ;;
      *)
        if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
          taglist="$taglist $tagname"
          # Evaluate the configuration.
          eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
        else
          $echo "$progname: ignoring unknown tag $tagname" 1>&2
        fi
        ;;
      esac
      ;;
    *)
      eval "$prev=\$arg"
      ;;
    esac
 
    prev=
    prevopt=
    continue
  fi
 
  # Have we seen a non-optional argument yet?
  case $arg in
  --help)
    show_help=yes
    ;;
 
  --version)
    $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
    $echo
    $echo "Copyright (C) 2005  Free Software Foundation, Inc."
    $echo "This is free software; see the source for copying conditions.  There is NO"
    $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
    exit $?
    ;;
 
  --config)
    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
    # Now print the configurations for the tags.
    for tagname in $taglist; do
      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
    done
    exit $?
    ;;
 
  --debug)
    $echo "$progname: enabling shell trace mode"
    set -x
    preserve_args="$preserve_args $arg"
    ;;
 
  --dry-run | -n)
    run=:
    ;;
 
  --features)
    $echo "host: $host"
    if test "$build_libtool_libs" = yes; then
      $echo "enable shared libraries"
    else
      $echo "disable shared libraries"
    fi
    if test "$build_old_libs" = yes; then
      $echo "enable static libraries"
    else
      $echo "disable static libraries"
    fi
    exit $?
    ;;
 
  --finish) mode="finish" ;;
 
  --mode) prevopt="--mode" prev=mode ;;
  --mode=*) mode="$optarg" ;;
 
  --preserve-dup-deps) duplicate_deps="yes" ;;
 
  --quiet | --silent)
    show=:
    preserve_args="$preserve_args $arg"
    ;;
 
  --tag) prevopt="--tag" prev=tag ;;
  --tag=*)
    set tag "$optarg" ${1+"$@"}
    shift
    prev=tag
    preserve_args="$preserve_args --tag"
    ;;
 
  -dlopen)
    prevopt="-dlopen"
    prev=execute_dlfiles
    ;;
 
  -*)
    $echo "$modename: unrecognized option \`$arg'" 1>&2
    $echo "$help" 1>&2
    exit $EXIT_FAILURE
    ;;
 
  *)
    nonopt="$arg"
    break
    ;;
  esac
done
 
if test -n "$prevopt"; then
  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
  $echo "$help" 1>&2
  exit $EXIT_FAILURE
fi
 
# If this variable is set in any of the actions, the command in it
# will be execed at the end.  This prevents here-documents from being
# left over by shells.
exec_cmd=
 
if test -z "$show_help"; then
 
  # Infer the operation mode.
  if test -z "$mode"; then
    $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
    $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
    case $nonopt in
    *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
      mode=link
      for arg
      do
        case $arg in
        -c)
           mode=compile
           break
           ;;
        esac
      done
      ;;
    *db | *dbx | *strace | *truss)
      mode=execute
      ;;
    *install*|cp|mv)
      mode=install
      ;;
    *rm)
      mode=uninstall
      ;;
    *)
      # If we have no mode, but dlfiles were specified, then do execute mode.
      test -n "$execute_dlfiles" && mode=execute
 
      # Just use the default operation mode.
      if test -z "$mode"; then
        if test -n "$nonopt"; then
          $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
        else
          $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
        fi
      fi
      ;;
    esac
  fi
 
  # Only execute mode is allowed to have -dlopen flags.
  if test -n "$execute_dlfiles" && test "$mode" != execute; then
    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
    $echo "$help" 1>&2
    exit $EXIT_FAILURE
  fi
 
  # Change the help message to a mode-specific one.
  generic_help="$help"
  help="Try \`$modename --help --mode=$mode' for more information."
 
  # These modes are in order of execution frequency so that they run quickly.
  case $mode in
  # libtool compile mode
  compile)
    modename="$modename: compile"
    # Get the compilation command and the source file.
    base_compile=
    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
    suppress_opt=yes
    suppress_output=
    arg_mode=normal
    libobj=
    later=
 
    for arg
    do
      case "$arg_mode" in
      arg  )
        # do not "continue".  Instead, add this to base_compile
        lastarg="$arg"
        arg_mode=normal
        ;;
 
      target )
        libobj="$arg"
        arg_mode=normal
        continue
        ;;
 
      normal )
        # Accept any command-line options.
        case $arg in
        -o)
          if test -n "$libobj" ; then
            $echo "$modename: you cannot specify \`-o' more than once" 1>&2
            exit $EXIT_FAILURE
          fi
          arg_mode=target
          continue
          ;;
 
        -static | -prefer-pic | -prefer-non-pic)
          later="$later $arg"
          continue
          ;;
 
        -no-suppress)
          suppress_opt=no
          continue
          ;;
 
        -Xcompiler)
          arg_mode=arg  #  the next one goes into the "base_compile" arg list
          continue      #  The current "srcfile" will either be retained or
          ;;            #  replaced later.  I would guess that would be a bug.
 
        -Wc,*)
          args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
          lastarg=
          save_ifs="$IFS"; IFS=','
          for arg in $args; do
            IFS="$save_ifs"
 
            # Double-quote args containing other shell metacharacters.
            # Many Bourne shells cannot handle close brackets correctly
            # in scan sets, so we specify it separately.
            case $arg in
              *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
              arg="\"$arg\""
              ;;
            esac
            lastarg="$lastarg $arg"
          done
          IFS="$save_ifs"
          lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
 
          # Add the arguments to base_compile.
          base_compile="$base_compile $lastarg"
          continue
          ;;
 
        * )
          # Accept the current argument as the source file.
          # The previous "srcfile" becomes the current argument.
          #
          lastarg="$srcfile"
          srcfile="$arg"
          ;;
        esac  #  case $arg
        ;;
      esac    #  case $arg_mode
 
      # Aesthetically quote the previous argument.
      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
 
      case $lastarg in
      # Double-quote args containing other shell metacharacters.
      # Many Bourne shells cannot handle close brackets correctly
      # in scan sets, and some SunOS ksh mistreat backslash-escaping
      # in scan sets (worked around with variable expansion),
      # and furthermore cannot handle '|' '&' '(' ')' in scan sets
      # at all, so we specify them separately.
      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
        lastarg="\"$lastarg\""
        ;;
      esac
 
      base_compile="$base_compile $lastarg"
    done # for arg
 
    case $arg_mode in
    arg)
      $echo "$modename: you must specify an argument for -Xcompile"
      exit $EXIT_FAILURE
      ;;
    target)
      $echo "$modename: you must specify a target with \`-o'" 1>&2
      exit $EXIT_FAILURE
      ;;
    *)
      # Get the name of the library object.
      [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
      ;;
    esac
 
    # Recognize several different file suffixes.
    # If the user specifies -o file.o, it is replaced with file.lo
    xform='[cCFSifmso]'
    case $libobj in
    *.ada) xform=ada ;;
    *.adb) xform=adb ;;
    *.ads) xform=ads ;;
    *.asm) xform=asm ;;
    *.c++) xform=c++ ;;
    *.cc) xform=cc ;;
    *.ii) xform=ii ;;
    *.class) xform=class ;;
    *.cpp) xform=cpp ;;
    *.cxx) xform=cxx ;;
    *.f90) xform=f90 ;;
    *.for) xform=for ;;
    *.java) xform=java ;;
    esac
 
    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
 
    case $libobj in
    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
    *)
      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
      exit $EXIT_FAILURE
      ;;
    esac
 
    func_infer_tag $base_compile
 
    for arg in $later; do
      case $arg in
      -static)
        build_old_libs=yes
        continue
        ;;
 
      -prefer-pic)
        pic_mode=yes
        continue
        ;;
 
      -prefer-non-pic)
        pic_mode=no
        continue
        ;;
      esac
    done
 
    qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
    case $qlibobj in
      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
        qlibobj="\"$qlibobj\"" ;;
    esac
    if test "X$libobj" != "X$qlibobj"; then
        $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
        exit $EXIT_FAILURE
    fi
    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
    if test "X$xdir" = "X$obj"; then
      xdir=
    else
      xdir=$xdir/
    fi
    lobj=${xdir}$objdir/$objname
 
    if test -z "$base_compile"; then
      $echo "$modename: you must specify a compilation command" 1>&2
      $echo "$help" 1>&2
      exit $EXIT_FAILURE
    fi
 
    # Delete any leftover library objects.
    if test "$build_old_libs" = yes; then
      removelist="$obj $lobj $libobj ${libobj}T"
    else
      removelist="$lobj $libobj ${libobj}T"
    fi
 
    $run $rm $removelist
    trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
 
    # On Cygwin there's no "real" PIC flag so we must build both object types
    case $host_os in
    cygwin* | mingw* | pw32* | os2*)
      pic_mode=default
      ;;
    esac
    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
      # non-PIC code in shared libraries is not supported
      pic_mode=default
    fi
 
    # Calculate the filename of the output object if compiler does
    # not support -o with -c
    if test "$compiler_c_o" = no; then
      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
      lockfile="$output_obj.lock"
      removelist="$removelist $output_obj $lockfile"
      trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
    else
      output_obj=
      need_locks=no
      lockfile=
    fi
 
    # Lock this critical section if it is needed
    # We use this script file to make the link, it avoids creating a new file
    if test "$need_locks" = yes; then
      until $run ln "$progpath" "$lockfile" 2>/dev/null; do
        $show "Waiting for $lockfile to be removed"
        sleep 2
      done
    elif test "$need_locks" = warn; then
      if test -f "$lockfile"; then
        $echo "\
*** ERROR, $lockfile exists and contains:
`cat $lockfile 2>/dev/null`
 
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
your compiler does not support \`-c' and \`-o' together.  If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
 
        $run $rm $removelist
        exit $EXIT_FAILURE
      fi
      $echo "$srcfile" > "$lockfile"
    fi
 
    if test -n "$fix_srcfile_path"; then
      eval srcfile=\"$fix_srcfile_path\"
    fi
    qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
    case $qsrcfile in
      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
      qsrcfile="\"$qsrcfile\"" ;;
    esac
 
    $run $rm "$libobj" "${libobj}T"
 
    # Create a libtool object file (analogous to a ".la" file),
    # but don't create it if we're doing a dry run.
    test -z "$run" && cat > ${libobj}T <<EOF
# $libobj - a libtool object file
# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
 
# Name of the PIC object.
EOF
 
    # Only build a PIC object if we are building libtool libraries.
    if test "$build_libtool_libs" = yes; then
      # Without this assignment, base_compile gets emptied.
      fbsd_hideous_sh_bug=$base_compile
 
      if test "$pic_mode" != no; then
        command="$base_compile $qsrcfile $pic_flag"
      else
        # Don't build PIC code
        command="$base_compile $qsrcfile"
      fi
 
      if test ! -d "${xdir}$objdir"; then
        $show "$mkdir ${xdir}$objdir"
        $run $mkdir ${xdir}$objdir
        status=$?
        if test "$status" -ne 0 && test ! -d "${xdir}$objdir"; then
          exit $status
        fi
      fi
 
      if test -z "$output_obj"; then
        # Place PIC objects in $objdir
        command="$command -o $lobj"
      fi
 
      $run $rm "$lobj" "$output_obj"
 
      $show "$command"
      if $run eval "$command"; then :
      else
        test -n "$output_obj" && $run $rm $removelist
        exit $EXIT_FAILURE
      fi
 
      if test "$need_locks" = warn &&
         test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
        $echo "\
*** ERROR, $lockfile contains:
`cat $lockfile 2>/dev/null`
 
but it should contain:
$srcfile
 
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
your compiler does not support \`-c' and \`-o' together.  If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
 
        $run $rm $removelist
        exit $EXIT_FAILURE
      fi
 
      # Just move the object if needed, then go on to compile the next one
      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
        $show "$mv $output_obj $lobj"
        if $run $mv $output_obj $lobj; then :
        else
          error=$?
          $run $rm $removelist
          exit $error
        fi
      fi
 
      # Append the name of the PIC object to the libtool object file.
      test -z "$run" && cat >> ${libobj}T <<EOF
pic_object='$objdir/$objname'
 
EOF
 
      # Allow error messages only from the first compilation.
      if test "$suppress_opt" = yes; then
        suppress_output=' >/dev/null 2>&1'
      fi
    else
      # No PIC object so indicate it doesn't exist in the libtool
      # object file.
      test -z "$run" && cat >> ${libobj}T <<EOF
pic_object=none
 
EOF
    fi
 
    # Only build a position-dependent object if we build old libraries.
    if test "$build_old_libs" = yes; then
      if test "$pic_mode" != yes; then
        # Don't build PIC code
        command="$base_compile $qsrcfile"
      else
        command="$base_compile $qsrcfile $pic_flag"
      fi
      if test "$compiler_c_o" = yes; then
        command="$command -o $obj"
      fi
 
      # Suppress compiler output if we already did a PIC compilation.
      command="$command$suppress_output"
      $run $rm "$obj" "$output_obj"
      $show "$command"
      if $run eval "$command"; then :
      else
        $run $rm $removelist
        exit $EXIT_FAILURE
      fi
 
      if test "$need_locks" = warn &&
         test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
        $echo "\
*** ERROR, $lockfile contains:
`cat $lockfile 2>/dev/null`
 
but it should contain:
$srcfile
 
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
your compiler does not support \`-c' and \`-o' together.  If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
 
        $run $rm $removelist
        exit $EXIT_FAILURE
      fi
 
      # Just move the object if needed
      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
        $show "$mv $output_obj $obj"
        if $run $mv $output_obj $obj; then :
        else
          error=$?
          $run $rm $removelist
          exit $error
        fi
      fi
 
      # Append the name of the non-PIC object the libtool object file.
      # Only append if the libtool object file exists.
      test -z "$run" && cat >> ${libobj}T <<EOF
# Name of the non-PIC object.
non_pic_object='$objname'
 
EOF
    else
      # Append the name of the non-PIC object the libtool object file.
      # Only append if the libtool object file exists.
      test -z "$run" && cat >> ${libobj}T <<EOF
# Name of the non-PIC object.
non_pic_object=none
 
EOF
    fi
 
    $run $mv "${libobj}T" "${libobj}"
 
    # Unlock the critical section if it was locked
    if test "$need_locks" != no; then
      $run $rm "$lockfile"
    fi
 
    exit $EXIT_SUCCESS
    ;;
 
  # libtool link mode
  link | relink)
    modename="$modename: link"
    case $host in
    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
      # It is impossible to link a dll without this setting, and
      # we shouldn't force the makefile maintainer to figure out
      # which system we are compiling for in order to pass an extra
      # flag for every libtool invocation.
      # allow_undefined=no
 
      # FIXME: Unfortunately, there are problems with the above when trying
      # to make a dll which has undefined symbols, in which case not
      # even a static library is built.  For now, we need to specify
      # -no-undefined on the libtool link line when we can be certain
      # that all symbols are satisfied, otherwise we get a static library.
      allow_undefined=yes
      ;;
    *)
      allow_undefined=yes
      ;;
    esac
    libtool_args="$nonopt"
    base_compile="$nonopt $@"
    compile_command="$nonopt"
    finalize_command="$nonopt"
 
    compile_rpath=
    finalize_rpath=
    compile_shlibpath=
    finalize_shlibpath=
    convenience=
    old_convenience=
    deplibs=
    old_deplibs=
    compiler_flags=
    linker_flags=
    dllsearchpath=
    lib_search_path=`pwd`
    inst_prefix_dir=
 
    avoid_version=no
    dlfiles=
    dlprefiles=
    dlself=no
    export_dynamic=no
    export_symbols=
    export_symbols_regex=
    generated=
    libobjs=
    ltlibs=
    module=no
    no_install=no
    objs=
    non_pic_objects=
    precious_files_regex=
    prefer_static_libs=no
    preload=no
    prev=
    prevarg=
    release=
    rpath=
    xrpath=
    perm_rpath=
    temp_rpath=
    thread_safe=no
    vinfo=
    vinfo_number=no
 
    func_infer_tag $base_compile
 
    # We need to know -static, to get the right output filenames.
    for arg
    do
      case $arg in
      -all-static | -static)
        if test "X$arg" = "X-all-static"; then
          if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
            $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
          fi
          if test -n "$link_static_flag"; then
            dlopen_self=$dlopen_self_static
          fi
        else
          if test -z "$pic_flag" && test -n "$link_static_flag"; then
            dlopen_self=$dlopen_self_static
          fi
        fi
        build_libtool_libs=no
        build_old_libs=yes
        prefer_static_libs=yes
        break
        ;;
      esac
    done
 
    # See if our shared archives depend on static archives.
    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
 
    # Go through the arguments, transforming them on the way.
    while test "$#" -gt 0; do
      arg="$1"
      shift
      case $arg in
      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
        qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
        ;;
      *) qarg=$arg ;;
      esac
      libtool_args="$libtool_args $qarg"
 
      # If the previous option needs an argument, assign it.
      if test -n "$prev"; then
        case $prev in
        output)
          compile_command="$compile_command @OUTPUT@"
          finalize_command="$finalize_command @OUTPUT@"
          ;;
        esac
 
        case $prev in
        dlfiles|dlprefiles)
          if test "$preload" = no; then
            # Add the symbol object into the linking commands.
            compile_command="$compile_command @SYMFILE@"
            finalize_command="$finalize_command @SYMFILE@"
            preload=yes
          fi
          case $arg in
          *.la | *.lo) ;;  # We handle these cases below.
          force)
            if test "$dlself" = no; then
              dlself=needless
              export_dynamic=yes
            fi
            prev=
            continue
            ;;
          self)
            if test "$prev" = dlprefiles; then
              dlself=yes
            elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
              dlself=yes
            else
              dlself=needless
              export_dynamic=yes
            fi
            prev=
            continue
            ;;
          *)
            if test "$prev" = dlfiles; then
              dlfiles="$dlfiles $arg"
            else
              dlprefiles="$dlprefiles $arg"
            fi
            prev=
            continue
            ;;
          esac
          ;;
        expsyms)
          export_symbols="$arg"
          if test ! -f "$arg"; then
            $echo "$modename: symbol file \`$arg' does not exist"
            exit $EXIT_FAILURE
          fi
          prev=
          continue
          ;;
        expsyms_regex)
          export_symbols_regex="$arg"
          prev=
          continue
          ;;
        inst_prefix)
          inst_prefix_dir="$arg"
          prev=
          continue
          ;;
        precious_regex)
          precious_files_regex="$arg"
          prev=
          continue
          ;;
        release)
          release="-$arg"
          prev=
          continue
          ;;
        objectlist)
          if test -f "$arg"; then
            save_arg=$arg
            moreargs=
            for fil in `cat $save_arg`
            do
#             moreargs="$moreargs $fil"
              arg=$fil
              # A libtool-controlled object.
 
              # Check to see that this really is a libtool object.
              if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
                pic_object=
                non_pic_object=
 
                # Read the .lo file
                # If there is no directory component, then add one.
                case $arg in
                */* | *\\*) . $arg ;;
                *) . ./$arg ;;
                esac
 
                if test -z "$pic_object" || \
                   test -z "$non_pic_object" ||
                   test "$pic_object" = none && \
                   test "$non_pic_object" = none; then
                  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
                  exit $EXIT_FAILURE
                fi
 
                # Extract subdirectory from the argument.
                xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
                if test "X$xdir" = "X$arg"; then
                  xdir=
                else
                  xdir="$xdir/"
                fi
 
                if test "$pic_object" != none; then
                  # Prepend the subdirectory the object is found in.
                  pic_object="$xdir$pic_object"
 
                  if test "$prev" = dlfiles; then
                    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
                      dlfiles="$dlfiles $pic_object"
                      prev=
                      continue
                    else
                      # If libtool objects are unsupported, then we need to preload.
                      prev=dlprefiles
                    fi
                  fi
 
                  # CHECK ME:  I think I busted this.  -Ossama
                  if test "$prev" = dlprefiles; then
                    # Preload the old-style object.
                    dlprefiles="$dlprefiles $pic_object"
                    prev=
                  fi
 
                  # A PIC object.
                  libobjs="$libobjs $pic_object"
                  arg="$pic_object"
                fi
 
                # Non-PIC object.
                if test "$non_pic_object" != none; then
                  # Prepend the subdirectory the object is found in.
                  non_pic_object="$xdir$non_pic_object"
 
                  # A standard non-PIC object
                  non_pic_objects="$non_pic_objects $non_pic_object"
                  if test -z "$pic_object" || test "$pic_object" = none ; then
                    arg="$non_pic_object"
                  fi
                fi
              else
                # Only an error if not doing a dry-run.
                if test -z "$run"; then
                  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
                  exit $EXIT_FAILURE
                else
                  # Dry-run case.
 
                  # Extract subdirectory from the argument.
                  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
                  if test "X$xdir" = "X$arg"; then
                    xdir=
                  else
                    xdir="$xdir/"
                  fi
 
                  pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
                  non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
                  libobjs="$libobjs $pic_object"
                  non_pic_objects="$non_pic_objects $non_pic_object"
                fi
              fi
            done
          else
            $echo "$modename: link input file \`$save_arg' does not exist"
            exit $EXIT_FAILURE
          fi
          arg=$save_arg
          prev=
          continue
          ;;
        rpath | xrpath)
          # We need an absolute path.
          case $arg in
          [\\/]* | [A-Za-z]:[\\/]*) ;;
          *)
            $echo "$modename: only absolute run-paths are allowed" 1>&2
            exit $EXIT_FAILURE
            ;;
          esac
          if test "$prev" = rpath; then
            case "$rpath " in
            *" $arg "*) ;;
            *) rpath="$rpath $arg" ;;
            esac
          else
            case "$xrpath " in
            *" $arg "*) ;;
            *) xrpath="$xrpath $arg" ;;
            esac
          fi
          prev=
          continue
          ;;
        xcompiler)
          compiler_flags="$compiler_flags $qarg"
          prev=
          compile_command="$compile_command $qarg"
          finalize_command="$finalize_command $qarg"
          continue
          ;;
        xlinker)
          linker_flags="$linker_flags $qarg"
          compiler_flags="$compiler_flags $wl$qarg"
          prev=
          compile_command="$compile_command $wl$qarg"
          finalize_command="$finalize_command $wl$qarg"
          continue
          ;;
        xcclinker)
          linker_flags="$linker_flags $qarg"
          compiler_flags="$compiler_flags $qarg"
          prev=
          compile_command="$compile_command $qarg"
          finalize_command="$finalize_command $qarg"
          continue
          ;;
        shrext)
          shrext_cmds="$arg"
          prev=
          continue
          ;;
        darwin_framework)
          compiler_flags="$compiler_flags $arg"
          prev=
          continue
          ;;
        *)
          eval "$prev=\"\$arg\""
          prev=
          continue
          ;;
        esac
      fi # test -n "$prev"
 
      prevarg="$arg"
 
      case $arg in
      -all-static)
        if test -n "$link_static_flag"; then
          compile_command="$compile_command $link_static_flag"
          finalize_command="$finalize_command $link_static_flag"
        fi
        continue
        ;;
 
      -allow-undefined)
        # FIXME: remove this flag sometime in the future.
        $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
        continue
        ;;
 
      -avoid-version)
        avoid_version=yes
        continue
        ;;
 
      -dlopen)
        prev=dlfiles
        continue
        ;;
 
      -dlpreopen)
        prev=dlprefiles
        continue
        ;;
 
      -export-dynamic)
        export_dynamic=yes
        continue
        ;;
 
      -export-symbols | -export-symbols-regex)
        if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
          $echo "$modename: more than one -exported-symbols argument is not allowed"
          exit $EXIT_FAILURE
        fi
        if test "X$arg" = "X-export-symbols"; then
          prev=expsyms
        else
          prev=expsyms_regex
        fi
        continue
        ;;
 
      -framework)
        prev=darwin_framework
        compiler_flags="$compiler_flags $arg"
        continue
        ;;
 
      -inst-prefix-dir)
        prev=inst_prefix
        continue
        ;;
 
      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
      # so, if we see these flags be careful not to treat them like -L
      -L[A-Z][A-Z]*:*)
        case $with_gcc/$host in
        no/*-*-irix* | /*-*-irix*)
          compile_command="$compile_command $arg"
          finalize_command="$finalize_command $arg"
          ;;
        esac
        continue
        ;;
 
      -L*)
        dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
        # We need an absolute path.
        case $dir in
        [\\/]* | [A-Za-z]:[\\/]*) ;;
        *)
          absdir=`cd "$dir" && pwd`
          if test -z "$absdir"; then
            $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
            exit $EXIT_FAILURE
          fi
          dir="$absdir"
          ;;
        esac
        case "$deplibs " in
        *" -L$dir "*) ;;
        *)
          deplibs="$deplibs -L$dir"
          lib_search_path="$lib_search_path $dir"
          ;;
        esac
        case $host in
        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
          case :$dllsearchpath: in
          *":$dir:"*) ;;
          *) dllsearchpath="$dllsearchpath:$dir";;
          esac
          ;;
        esac
        continue
        ;;
 
      -l*)
        if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
          case $host in
          *-*-cygwin* | *-*-pw32* | *-*-beos*)
            # These systems don't actually have a C or math library (as such)
            continue
            ;;
          *-*-mingw* | *-*-os2*)
            # These systems don't actually have a C library (as such)
            test "X$arg" = "X-lc" && continue
            ;;
          *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
            # Do not include libc due to us having libc/libc_r.
            test "X$arg" = "X-lc" && continue
            ;;
          *-*-rhapsody* | *-*-darwin1.[012])
            # Rhapsody C and math libraries are in the System framework
            deplibs="$deplibs -framework System"
            continue
          esac
        elif test "X$arg" = "X-lc_r"; then
         case $host in
         *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
           # Do not include libc_r directly, use -pthread flag.
           continue
           ;;
         esac
        fi
        deplibs="$deplibs $arg"
        continue
        ;;
 
      # Tru64 UNIX uses -model [arg] to determine the layout of C++
      # classes, name mangling, and exception handling.
      -model)
        compile_command="$compile_command $arg"
        compiler_flags="$compiler_flags $arg"
        finalize_command="$finalize_command $arg"
        prev=xcompiler
        continue
        ;;
 
     -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
        compiler_flags="$compiler_flags $arg"
        compile_command="$compile_command $arg"
        finalize_command="$finalize_command $arg"
        continue
        ;;
 
      -module)
        module=yes
        continue
        ;;
 
      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
      # -r[0-9][0-9]* specifies the processor on the SGI compiler
      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
      # +DA*, +DD* enable 64-bit mode on the HP compiler
      # -q* pass through compiler args for the IBM compiler
      # -m* pass through architecture-specific compiler args for GCC
      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*)
 
        # Unknown arguments in both finalize_command and compile_command need
        # to be aesthetically quoted because they are evaled later.
        arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
        case $arg in
        *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
          arg="\"$arg\""
          ;;
        esac
        compile_command="$compile_command $arg"
        finalize_command="$finalize_command $arg"
        if test "$with_gcc" = "yes" ; then
          compiler_flags="$compiler_flags $arg"
        fi
        continue
        ;;
 
      -shrext)
        prev=shrext
        continue
        ;;
 
      -no-fast-install)
        fast_install=no
        continue
        ;;
 
      -no-install)
        case $host in
        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
          # The PATH hackery in wrapper scripts is required on Windows
          # in order for the loader to find any dlls it needs.
          $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
          $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
          fast_install=no
          ;;
        *) no_install=yes ;;
        esac
        continue
        ;;
 
      -no-undefined)
        allow_undefined=no
        continue
        ;;
 
      -objectlist)
        prev=objectlist
        continue
        ;;
 
      -o) prev=output ;;
 
      -precious-files-regex)
        prev=precious_regex
        continue
        ;;
 
      -release)
        prev=release
        continue
        ;;
 
      -rpath)
        prev=rpath
        continue
        ;;
 
      -R)
        prev=xrpath
        continue
        ;;
 
      -R*)
        dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
        # We need an absolute path.
        case $dir in
        [\\/]* | [A-Za-z]:[\\/]*) ;;
        *)
          $echo "$modename: only absolute run-paths are allowed" 1>&2
          exit $EXIT_FAILURE
          ;;
        esac
        case "$xrpath " in
        *" $dir "*) ;;
        *) xrpath="$xrpath $dir" ;;
        esac
        continue
        ;;
 
      -static)
        # The effects of -static are defined in a previous loop.
        # We used to do the same as -all-static on platforms that
        # didn't have a PIC flag, but the assumption that the effects
        # would be equivalent was wrong.  It would break on at least
        # Digital Unix and AIX.
        continue
        ;;
 
      -thread-safe)
        thread_safe=yes
        continue
        ;;
 
      -version-info)
        prev=vinfo
        continue
        ;;
      -version-number)
        prev=vinfo
        vinfo_number=yes
        continue
        ;;
 
      -Wc,*)
        args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
        arg=
        save_ifs="$IFS"; IFS=','
        for flag in $args; do
          IFS="$save_ifs"
          case $flag in
            *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
            flag="\"$flag\""
            ;;
          esac
          arg="$arg $wl$flag"
          compiler_flags="$compiler_flags $flag"
        done
        IFS="$save_ifs"
        arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
        ;;
 
      -Wl,*)
        args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
        arg=
        save_ifs="$IFS"; IFS=','
        for flag in $args; do
          IFS="$save_ifs"
          case $flag in
            *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
            flag="\"$flag\""
            ;;
          esac
          arg="$arg $wl$flag"
          compiler_flags="$compiler_flags $wl$flag"
          linker_flags="$linker_flags $flag"
        done
        IFS="$save_ifs"
        arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
        ;;
 
      -Xcompiler)
        prev=xcompiler
        continue
        ;;
 
      -Xlinker)
        prev=xlinker
        continue
        ;;
 
      -XCClinker)
        prev=xcclinker
        continue
        ;;
 
      # Some other compiler flag.
      -* | +*)
        # Unknown arguments in both finalize_command and compile_command need
        # to be aesthetically quoted because they are evaled later.
        arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
        case $arg in
        *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
          arg="\"$arg\""
          ;;
        esac
        ;;
 
      *.$objext)
        # A standard object.
        objs="$objs $arg"
        ;;
 
      *.lo)
        # A libtool-controlled object.
 
        # Check to see that this really is a libtool object.
        if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
          pic_object=
          non_pic_object=
 
          # Read the .lo file
          # If there is no directory component, then add one.
          case $arg in
          */* | *\\*) . $arg ;;
          *) . ./$arg ;;
          esac
 
          if test -z "$pic_object" || \
             test -z "$non_pic_object" ||
             test "$pic_object" = none && \
             test "$non_pic_object" = none; then
            $echo "$modename: cannot find name of object for \`$arg'" 1>&2
            exit $EXIT_FAILURE
          fi
 
          # Extract subdirectory from the argument.
          xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
          if test "X$xdir" = "X$arg"; then
            xdir=
          else
            xdir="$xdir/"
          fi
 
          if test "$pic_object" != none; then
            # Prepend the subdirectory the object is found in.
            pic_object="$xdir$pic_object"
 
            if test "$prev" = dlfiles; then
              if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
                dlfiles="$dlfiles $pic_object"
                prev=
                continue
              else
                # If libtool objects are unsupported, then we need to preload.
                prev=dlprefiles
              fi
            fi
 
            # CHECK ME:  I think I busted this.  -Ossama
            if test "$prev" = dlprefiles; then
              # Preload the old-style object.
              dlprefiles="$dlprefiles $pic_object"
              prev=
            fi
 
            # A PIC object.
            libobjs="$libobjs $pic_object"
            arg="$pic_object"
          fi
 
          # Non-PIC object.
          if test "$non_pic_object" != none; then
            # Prepend the subdirectory the object is found in.
            non_pic_object="$xdir$non_pic_object"
 
            # A standard non-PIC object
            non_pic_objects="$non_pic_objects $non_pic_object"
            if test -z "$pic_object" || test "$pic_object" = none ; then
              arg="$non_pic_object"
            fi
          fi
        else
          # Only an error if not doing a dry-run.
          if test -z "$run"; then
            $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
            exit $EXIT_FAILURE
          else
            # Dry-run case.
 
            # Extract subdirectory from the argument.
            xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
            if test "X$xdir" = "X$arg"; then
              xdir=
            else
              xdir="$xdir/"
            fi
 
            pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
            non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
            libobjs="$libobjs $pic_object"
            non_pic_objects="$non_pic_objects $non_pic_object"
          fi
        fi
        ;;
 
      *.$libext)
        # An archive.
        deplibs="$deplibs $arg"
        old_deplibs="$old_deplibs $arg"
        continue
        ;;
 
      *.la)
        # A libtool-controlled library.
 
        if test "$prev" = dlfiles; then
          # This library was specified with -dlopen.
          dlfiles="$dlfiles $arg"
          prev=
        elif test "$prev" = dlprefiles; then
          # The library was specified with -dlpreopen.
          dlprefiles="$dlprefiles $arg"
          prev=
        else
          deplibs="$deplibs $arg"
        fi
        continue
        ;;
 
      # Some other compiler argument.
      *)
        # Unknown arguments in both finalize_command and compile_command need
        # to be aesthetically quoted because they are evaled later.
        arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
        case $arg in
        *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
          arg="\"$arg\""
          ;;
        esac
        ;;
      esac # arg
 
      # Now actually substitute the argument into the commands.
      if test -n "$arg"; then
        compile_command="$compile_command $arg"
        finalize_command="$finalize_command $arg"
      fi
    done # argument parsing loop
 
    if test -n "$prev"; then
      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
      $echo "$help" 1>&2
      exit $EXIT_FAILURE
    fi
 
    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
      eval arg=\"$export_dynamic_flag_spec\"
      compile_command="$compile_command $arg"
      finalize_command="$finalize_command $arg"
    fi
 
    oldlibs=
    # calculate the name of the file, without its directory
    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
    libobjs_save="$libobjs"
 
    if test -n "$shlibpath_var"; then
      # get the directories listed in $shlibpath_var
      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
    else
      shlib_search_path=
    fi
    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
 
    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
    if test "X$output_objdir" = "X$output"; then
      output_objdir="$objdir"
    else
      output_objdir="$output_objdir/$objdir"
    fi
    # Create the object directory.
    if test ! -d "$output_objdir"; then
      $show "$mkdir $output_objdir"
      $run $mkdir $output_objdir
      status=$?
      if test "$status" -ne 0 && test ! -d "$output_objdir"; then
        exit $status
      fi
    fi
 
    # Determine the type of output
    case $output in
    "")
      $echo "$modename: you must specify an output file" 1>&2
      $echo "$help" 1>&2
      exit $EXIT_FAILURE
      ;;
    *.$libext) linkmode=oldlib ;;
    *.lo | *.$objext) linkmode=obj ;;
    *.la) linkmode=lib ;;
    *) linkmode=prog ;; # Anything else should be a program.
    esac
 
    case $host in
    *cygwin* | *mingw* | *pw32*)
      # don't eliminate duplications in $postdeps and $predeps
      duplicate_compiler_generated_deps=yes
      ;;
    *)
      duplicate_compiler_generated_deps=$duplicate_deps
      ;;
    esac
    specialdeplibs=
 
    libs=
    # Find all interdependent deplibs by searching for libraries
    # that are linked more than once (e.g. -la -lb -la)
    for deplib in $deplibs; do
      if test "X$duplicate_deps" = "Xyes" ; then
        case "$libs " in
        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
        esac
      fi
      libs="$libs $deplib"
    done
 
    if test "$linkmode" = lib; then
      libs="$predeps $libs $compiler_lib_search_path $postdeps"
 
      # Compute libraries that are listed more than once in $predeps
      # $postdeps and mark them as special (i.e., whose duplicates are
      # not to be eliminated).
      pre_post_deps=
      if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
        for pre_post_dep in $predeps $postdeps; do
          case "$pre_post_deps " in
          *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
          esac
          pre_post_deps="$pre_post_deps $pre_post_dep"
        done
      fi
      pre_post_deps=
    fi
 
    deplibs=
    newdependency_libs=
    newlib_search_path=
    need_relink=no # whether we're linking any uninstalled libtool libraries
    notinst_deplibs= # not-installed libtool libraries
    notinst_path= # paths that contain not-installed libtool libraries
    case $linkmode in
    lib)
        passes="conv link"
        for file in $dlfiles $dlprefiles; do
          case $file in
          *.la) ;;
          *)
            $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
            exit $EXIT_FAILURE
            ;;
          esac
        done
        ;;
    prog)
        compile_deplibs=
        finalize_deplibs=
        alldeplibs=no
        newdlfiles=
        newdlprefiles=
        passes="conv scan dlopen dlpreopen link"
        ;;
    *)  passes="conv"
        ;;
    esac
    for pass in $passes; do
      if test "$linkmode,$pass" = "lib,link" ||
         test "$linkmode,$pass" = "prog,scan"; then
        libs="$deplibs"
        deplibs=
      fi
      if test "$linkmode" = prog; then
        case $pass in
        dlopen) libs="$dlfiles" ;;
        dlpreopen) libs="$dlprefiles" ;;
        link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
        esac
      fi
      if test "$pass" = dlopen; then
        # Collect dlpreopened libraries
        save_deplibs="$deplibs"
        deplibs=
      fi
      for deplib in $libs; do
        lib=
        found=no
        case $deplib in
        -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
          if test "$linkmode,$pass" = "prog,link"; then
            compile_deplibs="$deplib $compile_deplibs"
            finalize_deplibs="$deplib $finalize_deplibs"
          else
            compiler_flags="$compiler_flags $deplib"
          fi
          continue
          ;;
        -l*)
          if test "$linkmode" != lib && test "$linkmode" != prog; then
            $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
            continue
          fi
          name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
          for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
            for search_ext in .la $std_shrext .so .a; do
              # Search the libtool library
              lib="$searchdir/lib${name}${search_ext}"
              if test -f "$lib"; then
                if test "$search_ext" = ".la"; then
                  found=yes
                else
                  found=no
                fi
                break 2
              fi
            done
          done
          if test "$found" != yes; then
            # deplib doesn't seem to be a libtool library
            if test "$linkmode,$pass" = "prog,link"; then
              compile_deplibs="$deplib $compile_deplibs"
              finalize_deplibs="$deplib $finalize_deplibs"
            else
              deplibs="$deplib $deplibs"
              test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
            fi
            continue
          else # deplib is a libtool library
            # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
            # We need to do some special things here, and not later.
            if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
              case " $predeps $postdeps " in
              *" $deplib "*)
                if (${SED} -e '2q' $lib |
                    grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
                  library_names=
                  old_library=
                  case $lib in
                  */* | *\\*) . $lib ;;
                  *) . ./$lib ;;
                  esac
                  for l in $old_library $library_names; do
                    ll="$l"
                  done
                  if test "X$ll" = "X$old_library" ; then # only static version available
                    found=no
                    ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
                    test "X$ladir" = "X$lib" && ladir="."
                    lib=$ladir/$old_library
                    if test "$linkmode,$pass" = "prog,link"; then
                      compile_deplibs="$deplib $compile_deplibs"
                      finalize_deplibs="$deplib $finalize_deplibs"
                    else
                      deplibs="$deplib $deplibs"
                      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
                    fi
                    continue
                  fi
                fi
                ;;
              *) ;;
              esac
            fi
          fi
          ;; # -l
        -L*)
          case $linkmode in
          lib)
            deplibs="$deplib $deplibs"
            test "$pass" = conv && continue
            newdependency_libs="$deplib $newdependency_libs"
            newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
            ;;
          prog)
            if test "$pass" = conv; then
              deplibs="$deplib $deplibs"
              continue
            fi
            if test "$pass" = scan; then
              deplibs="$deplib $deplibs"
            else
              compile_deplibs="$deplib $compile_deplibs"
              finalize_deplibs="$deplib $finalize_deplibs"
            fi
            newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
            ;;
          *)
            $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
            ;;
          esac # linkmode
          continue
          ;; # -L
        -R*)
          if test "$pass" = link; then
            dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
            # Make sure the xrpath contains only unique directories.
            case "$xrpath " in
            *" $dir "*) ;;
            *) xrpath="$xrpath $dir" ;;
            esac
          fi
          deplibs="$deplib $deplibs"
          continue
          ;;
        *.la) lib="$deplib" ;;
        *.$libext)
          if test "$pass" = conv; then
            deplibs="$deplib $deplibs"
            continue
          fi
          case $linkmode in
          lib)
            valid_a_lib=no
            case $deplibs_check_method in
              match_pattern*)
                set dummy $deplibs_check_method
                match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
                if eval $echo \"$deplib\" 2>/dev/null \
                    | $SED 10q \
                    | $EGREP "$match_pattern_regex" > /dev/null; then
                  valid_a_lib=yes
                fi
                ;;
              pass_all)
                valid_a_lib=yes
                ;;
            esac
            if test "$valid_a_lib" != yes; then
              $echo
              $echo "*** Warning: Trying to link with static lib archive $deplib."
              $echo "*** I have the capability to make that library automatically link in when"
              $echo "*** you link to this library.  But I can only do this if you have a"
              $echo "*** shared version of the library, which you do not appear to have"
              $echo "*** because the file extensions .$libext of this argument makes me believe"
              $echo "*** that it is just a static archive that I should not used here."
            else
              $echo
              $echo "*** Warning: Linking the shared library $output against the"
              $echo "*** static library $deplib is not portable!"
              deplibs="$deplib $deplibs"
            fi
            continue
            ;;
          prog)
            if test "$pass" != link; then
              deplibs="$deplib $deplibs"
            else
              compile_deplibs="$deplib $compile_deplibs"
              finalize_deplibs="$deplib $finalize_deplibs"
            fi
            continue
            ;;
          esac # linkmode
          ;; # *.$libext
        *.lo | *.$objext)
          if test "$pass" = conv; then
            deplibs="$deplib $deplibs"
          elif test "$linkmode" = prog; then
            if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
              # If there is no dlopen support or we're linking statically,
              # we need to preload.
              newdlprefiles="$newdlprefiles $deplib"
              compile_deplibs="$deplib $compile_deplibs"
              finalize_deplibs="$deplib $finalize_deplibs"
            else
              newdlfiles="$newdlfiles $deplib"
            fi
          fi
          continue
          ;;
        %DEPLIBS%)
          alldeplibs=yes
          continue
          ;;
        esac # case $deplib
        if test "$found" = yes || test -f "$lib"; then :
        else
          $echo "$modename: cannot find the library \`$lib'" 1>&2
          exit $EXIT_FAILURE
        fi
 
        # Check to see that this really is a libtool archive.
        if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
        else
          $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
          exit $EXIT_FAILURE
        fi
 
        ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
        test "X$ladir" = "X$lib" && ladir="."
 
        dlname=
        dlopen=
        dlpreopen=
        libdir=
        library_names=
        old_library=
        # If the library was installed with an old release of libtool,
        # it will not redefine variables installed, or shouldnotlink
        installed=yes
        shouldnotlink=no
        avoidtemprpath=
 
 
        # Read the .la file
        case $lib in
        */* | *\\*) . $lib ;;
        *) . ./$lib ;;
        esac
 
        if test "$linkmode,$pass" = "lib,link" ||
           test "$linkmode,$pass" = "prog,scan" ||
           { test "$linkmode" != prog && test "$linkmode" != lib; }; then
          test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
          test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
        fi
 
        if test "$pass" = conv; then
          # Only check for convenience libraries
          deplibs="$lib $deplibs"
          if test -z "$libdir"; then
            if test -z "$old_library"; then
              $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
              exit $EXIT_FAILURE
            fi
            # It is a libtool convenience library, so add in its objects.
            convenience="$convenience $ladir/$objdir/$old_library"
            old_convenience="$old_convenience $ladir/$objdir/$old_library"
            tmp_libs=
            for deplib in $dependency_libs; do
              deplibs="$deplib $deplibs"
              if test "X$duplicate_deps" = "Xyes" ; then
                case "$tmp_libs " in
                *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
                esac
              fi
              tmp_libs="$tmp_libs $deplib"
            done
          elif test "$linkmode" != prog && test "$linkmode" != lib; then
            $echo "$modename: \`$lib' is not a convenience library" 1>&2
            exit $EXIT_FAILURE
          fi
          continue
        fi # $pass = conv
 
 
        # Get the name of the library we link against.
        linklib=
        for l in $old_library $library_names; do
          linklib="$l"
        done
        if test -z "$linklib"; then
          $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
          exit $EXIT_FAILURE
        fi
 
        # This library was specified with -dlopen.
        if test "$pass" = dlopen; then
          if test -z "$libdir"; then
            $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
            exit $EXIT_FAILURE
          fi
          if test -z "$dlname" ||
             test "$dlopen_support" != yes ||
             test "$build_libtool_libs" = no; then
            # If there is no dlname, no dlopen support or we're linking
            # statically, we need to preload.  We also need to preload any
            # dependent libraries so libltdl's deplib preloader doesn't
            # bomb out in the load deplibs phase.
            dlprefiles="$dlprefiles $lib $dependency_libs"
          else
            newdlfiles="$newdlfiles $lib"
          fi
          continue
        fi # $pass = dlopen
 
        # We need an absolute path.
        case $ladir in
        [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
        *)
          abs_ladir=`cd "$ladir" && pwd`
          if test -z "$abs_ladir"; then
            $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
            $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
            abs_ladir="$ladir"
          fi
          ;;
        esac
        laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
 
        # Find the relevant object directory and library name.
        if test "X$installed" = Xyes; then
          if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
            $echo "$modename: warning: library \`$lib' was moved." 1>&2
            dir="$ladir"
            absdir="$abs_ladir"
            libdir="$abs_ladir"
          else
            dir="$libdir"
            absdir="$libdir"
          fi
          test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
        else
          if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
            dir="$ladir"
            absdir="$abs_ladir"
            # Remove this search path later
            notinst_path="$notinst_path $abs_ladir"
          else
            dir="$ladir/$objdir"
            absdir="$abs_ladir/$objdir"
            # Remove this search path later
            notinst_path="$notinst_path $abs_ladir"
          fi
        fi # $installed = yes
        name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
 
        # This library was specified with -dlpreopen.
        if test "$pass" = dlpreopen; then
          if test -z "$libdir"; then
            $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
            exit $EXIT_FAILURE
          fi
          # Prefer using a static library (so that no silly _DYNAMIC symbols
          # are required to link).
          if test -n "$old_library"; then
            newdlprefiles="$newdlprefiles $dir/$old_library"
          # Otherwise, use the dlname, so that lt_dlopen finds it.
          elif test -n "$dlname"; then
            newdlprefiles="$newdlprefiles $dir/$dlname"
          else
            newdlprefiles="$newdlprefiles $dir/$linklib"
          fi
        fi # $pass = dlpreopen
 
        if test -z "$libdir"; then
          # Link the convenience library
          if test "$linkmode" = lib; then
            deplibs="$dir/$old_library $deplibs"
          elif test "$linkmode,$pass" = "prog,link"; then
            compile_deplibs="$dir/$old_library $compile_deplibs"
            finalize_deplibs="$dir/$old_library $finalize_deplibs"
          else
            deplibs="$lib $deplibs" # used for prog,scan pass
          fi
          continue
        fi
 
 
        if test "$linkmode" = prog && test "$pass" != link; then
          newlib_search_path="$newlib_search_path $ladir"
          deplibs="$lib $deplibs"
 
          linkalldeplibs=no
          if test "$link_all_deplibs" != no || test -z "$library_names" ||
             test "$build_libtool_libs" = no; then
            linkalldeplibs=yes
          fi
 
          tmp_libs=
          for deplib in $dependency_libs; do
            case $deplib in
            -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
            esac
            # Need to link against all dependency_libs?
            if test "$linkalldeplibs" = yes; then
              deplibs="$deplib $deplibs"
            else
              # Need to hardcode shared library paths
              # or/and link against static libraries
              newdependency_libs="$deplib $newdependency_libs"
            fi
            if test "X$duplicate_deps" = "Xyes" ; then
              case "$tmp_libs " in
              *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
              esac
            fi
            tmp_libs="$tmp_libs $deplib"
          done # for deplib
          continue
        fi # $linkmode = prog...
 
        if test "$linkmode,$pass" = "prog,link"; then
          if test -n "$library_names" &&
             { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
            # We need to hardcode the library path
            if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
              # Make sure the rpath contains only unique directories.
              case "$temp_rpath " in
              *" $dir "*) ;;
              *" $absdir "*) ;;
              *) temp_rpath="$temp_rpath $dir" ;;
              esac
            fi
 
            # Hardcode the library path.
            # Skip directories that are in the system default run-time
            # search path.
            case " $sys_lib_dlsearch_path " in
            *" $absdir "*) ;;
            *)
              case "$compile_rpath " in
              *" $absdir "*) ;;
              *) compile_rpath="$compile_rpath $absdir"
              esac
              ;;
            esac
            case " $sys_lib_dlsearch_path " in
            *" $libdir "*) ;;
            *)
              case "$finalize_rpath " in
              *" $libdir "*) ;;
              *) finalize_rpath="$finalize_rpath $libdir"
              esac
              ;;
            esac
          fi # $linkmode,$pass = prog,link...
 
          if test "$alldeplibs" = yes &&
             { test "$deplibs_check_method" = pass_all ||
               { test "$build_libtool_libs" = yes &&
                 test -n "$library_names"; }; }; then
            # We only need to search for static libraries
            continue
          fi
        fi
 
        link_static=no # Whether the deplib will be linked statically
        if test -n "$library_names" &&
           { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
          if test "$installed" = no; then
            notinst_deplibs="$notinst_deplibs $lib"
            need_relink=yes
          fi
          # This is a shared library
 
          # Warn about portability, can't link against -module's on
          # some systems (darwin)
          if test "$shouldnotlink" = yes && test "$pass" = link ; then
            $echo
            if test "$linkmode" = prog; then
              $echo "*** Warning: Linking the executable $output against the loadable module"
            else
              $echo "*** Warning: Linking the shared library $output against the loadable module"
            fi
            $echo "*** $linklib is not portable!"
          fi
          if test "$linkmode" = lib &&
             test "$hardcode_into_libs" = yes; then
            # Hardcode the library path.
            # Skip directories that are in the system default run-time
            # search path.
            case " $sys_lib_dlsearch_path " in
            *" $absdir "*) ;;
            *)
              case "$compile_rpath " in
              *" $absdir "*) ;;
              *) compile_rpath="$compile_rpath $absdir"
              esac
              ;;
            esac
            case " $sys_lib_dlsearch_path " in
            *" $libdir "*) ;;
            *)
              case "$finalize_rpath " in
              *" $libdir "*) ;;
              *) finalize_rpath="$finalize_rpath $libdir"
              esac
              ;;
            esac
          fi
 
          if test -n "$old_archive_from_expsyms_cmds"; then
            # figure out the soname
            set dummy $library_names
            realname="$2"
            shift; shift
            libname=`eval \\$echo \"$libname_spec\"`
            # use dlname if we got it. it's perfectly good, no?
            if test -n "$dlname"; then
              soname="$dlname"
            elif test -n "$soname_spec"; then
              # bleh windows
              case $host in
              *cygwin* | mingw*)
                major=`expr $current - $age`
                versuffix="-$major"
                ;;
              esac
              eval soname=\"$soname_spec\"
            else
              soname="$realname"
            fi
 
            # Make a new name for the extract_expsyms_cmds to use
            soroot="$soname"
            soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
            newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
 
            # If the library has no export list, then create one now
            if test -f "$output_objdir/$soname-def"; then :
            else
              $show "extracting exported symbol list from \`$soname'"
              save_ifs="$IFS"; IFS='~'
              cmds=$extract_expsyms_cmds
              for cmd in $cmds; do
                IFS="$save_ifs"
                eval cmd=\"$cmd\"
                $show "$cmd"
                $run eval "$cmd" || exit $?
              done
              IFS="$save_ifs"
            fi
 
            # Create $newlib
            if test -f "$output_objdir/$newlib"; then :; else
              $show "generating import library for \`$soname'"
              save_ifs="$IFS"; IFS='~'
              cmds=$old_archive_from_expsyms_cmds
              for cmd in $cmds; do
                IFS="$save_ifs"
                eval cmd=\"$cmd\"
                $show "$cmd"
                $run eval "$cmd" || exit $?
              done
              IFS="$save_ifs"
            fi
            # make sure the library variables are pointing to the new library
            dir=$output_objdir
            linklib=$newlib
          fi # test -n "$old_archive_from_expsyms_cmds"
 
          if test "$linkmode" = prog || test "$mode" != relink; then
            add_shlibpath=
            add_dir=
            add=
            lib_linked=yes
            case $hardcode_action in
            immediate | unsupported)
              if test "$hardcode_direct" = no; then
                add="$dir/$linklib"
                case $host in
                  *-*-sco3.2v5* ) add_dir="-L$dir" ;;
                  *-*-darwin* )
                    # if the lib is a module then we can not link against
                    # it, someone is ignoring the new warnings I added
                    if /usr/bin/file -L $add 2> /dev/null | $EGREP "bundle" >/dev/null ; then
                      $echo "** Warning, lib $linklib is a module, not a shared library"
                      if test -z "$old_library" ; then
                        $echo
                        $echo "** And there doesn't seem to be a static archive available"
                        $echo "** The link will probably fail, sorry"
                      else
                        add="$dir/$old_library"
                      fi
                    fi
                esac
              elif test "$hardcode_minus_L" = no; then
                case $host in
                *-*-sunos*) add_shlibpath="$dir" ;;
                esac
                add_dir="-L$dir"
                add="-l$name"
              elif test "$hardcode_shlibpath_var" = no; then
                add_shlibpath="$dir"
                add="-l$name"
              else
                lib_linked=no
              fi
              ;;
            relink)
              if test "$hardcode_direct" = yes; then
                add="$dir/$linklib"
              elif test "$hardcode_minus_L" = yes; then
                add_dir="-L$dir"
                # Try looking first in the location we're being installed to.
                if test -n "$inst_prefix_dir"; then
                  case "$libdir" in
                    [\\/]*)
                      add_dir="$add_dir -L$inst_prefix_dir$libdir"
                      ;;
                  esac
                fi
                add="-l$name"
              elif test "$hardcode_shlibpath_var" = yes; then
                add_shlibpath="$dir"
                add="-l$name"
              else
                lib_linked=no
              fi
              ;;
            *) lib_linked=no ;;
            esac
 
            if test "$lib_linked" != yes; then
              $echo "$modename: configuration error: unsupported hardcode properties"
              exit $EXIT_FAILURE
            fi
 
            if test -n "$add_shlibpath"; then
              case :$compile_shlibpath: in
              *":$add_shlibpath:"*) ;;
              *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
              esac
            fi
            if test "$linkmode" = prog; then
              test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
              test -n "$add" && compile_deplibs="$add $compile_deplibs"
            else
              test -n "$add_dir" && deplibs="$add_dir $deplibs"
              test -n "$add" && deplibs="$add $deplibs"
              if test "$hardcode_direct" != yes && \
                 test "$hardcode_minus_L" != yes && \
                 test "$hardcode_shlibpath_var" = yes; then
                case :$finalize_shlibpath: in
                *":$libdir:"*) ;;
                *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
                esac
              fi
            fi
          fi
 
          if test "$linkmode" = prog || test "$mode" = relink; then
            add_shlibpath=
            add_dir=
            add=
            # Finalize command for both is simple: just hardcode it.
            if test "$hardcode_direct" = yes; then
              add="$libdir/$linklib"
            elif test "$hardcode_minus_L" = yes; then
              add_dir="-L$libdir"
              add="-l$name"
            elif test "$hardcode_shlibpath_var" = yes; then
              case :$finalize_shlibpath: in
              *":$libdir:"*) ;;
              *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
              esac
              add="-l$name"
            elif test "$hardcode_automatic" = yes; then
              if test -n "$inst_prefix_dir" &&
                 test -f "$inst_prefix_dir$libdir/$linklib" ; then
                add="$inst_prefix_dir$libdir/$linklib"
              else
                add="$libdir/$linklib"
              fi
            else
              # We cannot seem to hardcode it, guess we'll fake it.
              add_dir="-L$libdir"
              # Try looking first in the location we're being installed to.
              if test -n "$inst_prefix_dir"; then
                case "$libdir" in
                  [\\/]*)
                    add_dir="$add_dir -L$inst_prefix_dir$libdir"
                    ;;
                esac
              fi
              add="-l$name"
            fi
 
            if test "$linkmode" = prog; then
              test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
              test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
            else
              test -n "$add_dir" && deplibs="$add_dir $deplibs"
              test -n "$add" && deplibs="$add $deplibs"
            fi
          fi
        elif test "$linkmode" = prog; then
          # Here we assume that one of hardcode_direct or hardcode_minus_L
          # is not unsupported.  This is valid on all known static and
          # shared platforms.
          if test "$hardcode_direct" != unsupported; then
            test -n "$old_library" && linklib="$old_library"
            compile_deplibs="$dir/$linklib $compile_deplibs"
            finalize_deplibs="$dir/$linklib $finalize_deplibs"
          else
            compile_deplibs="-l$name -L$dir $compile_deplibs"
            finalize_deplibs="-l$name -L$dir $finalize_deplibs"
          fi
        elif test "$build_libtool_libs" = yes; then
          # Not a shared library
          if test "$deplibs_check_method" != pass_all; then
            # We're trying link a shared library against a static one
            # but the system doesn't support it.
 
            # Just print a warning and add the library to dependency_libs so
            # that the program can be linked against the static library.
            $echo
            $echo "*** Warning: This system can not link to static lib archive $lib."
            $echo "*** I have the capability to make that library automatically link in when"
            $echo "*** you link to this library.  But I can only do this if you have a"
            $echo "*** shared version of the library, which you do not appear to have."
            if test "$module" = yes; then
              $echo "*** But as you try to build a module library, libtool will still create "
              $echo "*** a static module, that should work as long as the dlopening application"
              $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
              if test -z "$global_symbol_pipe"; then
                $echo
                $echo "*** However, this would only work if libtool was able to extract symbol"
                $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
                $echo "*** not find such a program.  So, this module is probably useless."
                $echo "*** \`nm' from GNU binutils and a full rebuild may help."
              fi
              if test "$build_old_libs" = no; then
                build_libtool_libs=module
                build_old_libs=yes
              else
                build_libtool_libs=no
              fi
            fi
          else
            convenience="$convenience $dir/$old_library"
            old_convenience="$old_convenience $dir/$old_library"
            deplibs="$dir/$old_library $deplibs"
            link_static=yes
          fi
        fi # link shared/static library?
 
        if test "$linkmode" = lib; then
          if test -n "$dependency_libs" &&
             { test "$hardcode_into_libs" != yes ||
               test "$build_old_libs" = yes ||
               test "$link_static" = yes; }; then
            # Extract -R from dependency_libs
            temp_deplibs=
            for libdir in $dependency_libs; do
              case $libdir in
              -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
                   case " $xrpath " in
                   *" $temp_xrpath "*) ;;
                   *) xrpath="$xrpath $temp_xrpath";;
                   esac;;
              *) temp_deplibs="$temp_deplibs $libdir";;
              esac
            done
            dependency_libs="$temp_deplibs"
          fi
 
          newlib_search_path="$newlib_search_path $absdir"
          # Link against this library
          test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
          # ... and its dependency_libs
          tmp_libs=
          for deplib in $dependency_libs; do
            newdependency_libs="$deplib $newdependency_libs"
            if test "X$duplicate_deps" = "Xyes" ; then
              case "$tmp_libs " in
              *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
              esac
            fi
            tmp_libs="$tmp_libs $deplib"
          done
 
          if test "$link_all_deplibs" != no; then
            # Add the search paths of all dependency libraries
            for deplib in $dependency_libs; do
              case $deplib in
              -L*) path="$deplib" ;;
              *.la)
                dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
                test "X$dir" = "X$deplib" && dir="."
                # We need an absolute path.
                case $dir in
                [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
                *)
                  absdir=`cd "$dir" && pwd`
                  if test -z "$absdir"; then
                    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
                    absdir="$dir"
                  fi
                  ;;
                esac
                if grep "^installed=no" $deplib > /dev/null; then
                  path="$absdir/$objdir"
                else
                  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
                  if test -z "$libdir"; then
                    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
                    exit $EXIT_FAILURE
                  fi
                  if test "$absdir" != "$libdir"; then
                    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
                  fi
                  path="$absdir"
                fi
                depdepl=
                case $host in
                *-*-darwin*)
                  # we do not want to link against static libs,
                  # but need to link against shared
                  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
                  if test -n "$deplibrary_names" ; then
                    for tmp in $deplibrary_names ; do
                      depdepl=$tmp
                    done
                    if test -f "$path/$depdepl" ; then
                      depdepl="$path/$depdepl"
                    fi
                    # do not add paths which are already there
                    case " $newlib_search_path " in
                    *" $path "*) ;;
                    *) newlib_search_path="$newlib_search_path $path";;
                    esac
                  fi
                  path=""
                  ;;
                *)
                  path="-L$path"
                  ;;
                esac
                ;;
              -l*)
                case $host in
                *-*-darwin*)
                  # Again, we only want to link against shared libraries
                  eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
                  for tmp in $newlib_search_path ; do
                    if test -f "$tmp/lib$tmp_libs.dylib" ; then
                      eval depdepl="$tmp/lib$tmp_libs.dylib"
                      break
                    fi
                  done
                  path=""
                  ;;
                *) continue ;;
                esac
                ;;
              *) continue ;;
              esac
              case " $deplibs " in
              *" $path "*) ;;
              *) deplibs="$path $deplibs" ;;
              esac
              case " $deplibs " in
              *" $depdepl "*) ;;
              *) deplibs="$depdepl $deplibs" ;;
              esac
            done
          fi # link_all_deplibs != no
        fi # linkmode = lib
      done # for deplib in $libs
      dependency_libs="$newdependency_libs"
      if test "$pass" = dlpreopen; then
        # Link the dlpreopened libraries before other libraries
        for deplib in $save_deplibs; do
          deplibs="$deplib $deplibs"
        done
      fi
      if test "$pass" != dlopen; then
        if test "$pass" != conv; then
          # Make sure lib_search_path contains only unique directories.
          lib_search_path=
          for dir in $newlib_search_path; do
            case "$lib_search_path " in
            *" $dir "*) ;;
            *) lib_search_path="$lib_search_path $dir" ;;
            esac
          done
          newlib_search_path=
        fi
 
        if test "$linkmode,$pass" != "prog,link"; then
          vars="deplibs"
        else
          vars="compile_deplibs finalize_deplibs"
        fi
        for var in $vars dependency_libs; do
          # Add libraries to $var in reverse order
          eval tmp_libs=\"\$$var\"
          new_libs=
          for deplib in $tmp_libs; do
            # FIXME: Pedantically, this is the right thing to do, so
            #        that some nasty dependency loop isn't accidentally
            #        broken:
            #new_libs="$deplib $new_libs"
            # Pragmatically, this seems to cause very few problems in
            # practice:
            case $deplib in
            -L*) new_libs="$deplib $new_libs" ;;
            -R*) ;;
            *)
              # And here is the reason: when a library appears more
              # than once as an explicit dependence of a library, or
              # is implicitly linked in more than once by the
              # compiler, it is considered special, and multiple
              # occurrences thereof are not removed.  Compare this
              # with having the same library being listed as a
              # dependency of multiple other libraries: in this case,
              # we know (pedantically, we assume) the library does not
              # need to be listed more than once, so we keep only the
              # last copy.  This is not always right, but it is rare
              # enough that we require users that really mean to play
              # such unportable linking tricks to link the library
              # using -Wl,-lname, so that libtool does not consider it
              # for duplicate removal.
              case " $specialdeplibs " in
              *" $deplib "*) new_libs="$deplib $new_libs" ;;
              *)
                case " $new_libs " in
                *" $deplib "*) ;;
                *) new_libs="$deplib $new_libs" ;;
                esac
                ;;
              esac
              ;;
            esac
          done
          tmp_libs=
          for deplib in $new_libs; do
            case $deplib in
            -L*)
              case " $tmp_libs " in
              *" $deplib "*) ;;
              *) tmp_libs="$tmp_libs $deplib" ;;
              esac
              ;;
            *) tmp_libs="$tmp_libs $deplib" ;;
            esac
          done
          eval $var=\"$tmp_libs\"
        done # for var
      fi
      # Last step: remove runtime libs from dependency_libs
      # (they stay in deplibs)
      tmp_libs=
      for i in $dependency_libs ; do
        case " $predeps $postdeps $compiler_lib_search_path " in
        *" $i "*)
          i=""
          ;;
        esac
        if test -n "$i" ; then
          tmp_libs="$tmp_libs $i"
        fi
      done
      dependency_libs=$tmp_libs
    done # for pass
    if test "$linkmode" = prog; then
      dlfiles="$newdlfiles"
      dlprefiles="$newdlprefiles"
    fi
 
    case $linkmode in
    oldlib)
      if test -n "$deplibs"; then
        $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
      fi
 
      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
        $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
      fi
 
      if test -n "$rpath"; then
        $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
      fi
 
      if test -n "$xrpath"; then
        $echo "$modename: warning: \`-R' is ignored for archives" 1>&2
      fi
 
      if test -n "$vinfo"; then
        $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
      fi
 
      if test -n "$release"; then
        $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
      fi
 
      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
        $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
      fi
 
      # Now set the variables for building old libraries.
      build_libtool_libs=no
      oldlibs="$output"
      objs="$objs$old_deplibs"
      ;;
 
    lib)
      # Make sure we only generate libraries of the form `libNAME.la'.
      case $outputname in
      lib*)
        name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
        eval shared_ext=\"$shrext_cmds\"
        eval libname=\"$libname_spec\"
        ;;
      *)
        if test "$module" = no; then
          $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
          $echo "$help" 1>&2
          exit $EXIT_FAILURE
        fi
        if test "$need_lib_prefix" != no; then
          # Add the "lib" prefix for modules if required
          name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
          eval shared_ext=\"$shrext_cmds\"
          eval libname=\"$libname_spec\"
        else
          libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
        fi
        ;;
      esac
 
      if test -n "$objs"; then
        if test "$deplibs_check_method" != pass_all; then
          $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
          exit $EXIT_FAILURE
        else
          $echo
          $echo "*** Warning: Linking the shared library $output against the non-libtool"
          $echo "*** objects $objs is not portable!"
          libobjs="$libobjs $objs"
        fi
      fi
 
      if test "$dlself" != no; then
        $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
      fi
 
      set dummy $rpath
      if test "$#" -gt 2; then
        $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
      fi
      install_libdir="$2"
 
      oldlibs=
      if test -z "$rpath"; then
        if test "$build_libtool_libs" = yes; then
          # Building a libtool convenience library.
          # Some compilers have problems with a `.al' extension so
          # convenience libraries should have the same extension an
          # archive normally would.
          oldlibs="$output_objdir/$libname.$libext $oldlibs"
          build_libtool_libs=convenience
          build_old_libs=yes
        fi
 
        if test -n "$vinfo"; then
          $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
        fi
 
        if test -n "$release"; then
          $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
        fi
      else
 
        # Parse the version information argument.
        save_ifs="$IFS"; IFS=':'
        set dummy $vinfo 0 0 0
        IFS="$save_ifs"
 
        if test -n "$8"; then
          $echo "$modename: too many parameters to \`-version-info'" 1>&2
          $echo "$help" 1>&2
          exit $EXIT_FAILURE
        fi
 
        # convert absolute version numbers to libtool ages
        # this retains compatibility with .la files and attempts
        # to make the code below a bit more comprehensible
 
        case $vinfo_number in
        yes)
          number_major="$2"
          number_minor="$3"
          number_revision="$4"
          #
          # There are really only two kinds -- those that
          # use the current revision as the major version
          # and those that subtract age and use age as
          # a minor version.  But, then there is irix
          # which has an extra 1 added just for fun
          #
          case $version_type in
          darwin|linux|osf|windows)
            current=`expr $number_major + $number_minor`
            age="$number_minor"
            revision="$number_revision"
            ;;
          freebsd-aout|freebsd-elf|sunos)
            current="$number_major"
            revision="$number_minor"
            age="0"
            ;;
          irix|nonstopux)
            current=`expr $number_major + $number_minor - 1`
            age="$number_minor"
            revision="$number_minor"
            ;;
          esac
          ;;
        no)
          current="$2"
          revision="$3"
          age="$4"
          ;;
        esac
 
        # Check that each of the things are valid numbers.
        case $current in
        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
        *)
          $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
          $echo "$modename: \`$vinfo' is not valid version information" 1>&2
          exit $EXIT_FAILURE
          ;;
        esac
 
        case $revision in
        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
        *)
          $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
          $echo "$modename: \`$vinfo' is not valid version information" 1>&2
          exit $EXIT_FAILURE
          ;;
        esac
 
        case $age in
        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
        *)
          $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
          $echo "$modename: \`$vinfo' is not valid version information" 1>&2
          exit $EXIT_FAILURE
          ;;
        esac
 
        if test "$age" -gt "$current"; then
          $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
          $echo "$modename: \`$vinfo' is not valid version information" 1>&2
          exit $EXIT_FAILURE
        fi
 
        # Calculate the version variables.
        major=
        versuffix=
        verstring=
        case $version_type in
        none) ;;
 
        darwin)
          # Like Linux, but with the current version available in
          # verstring for coding it into the library header
          major=.`expr $current - $age`
          versuffix="$major.$age.$revision"
          # Darwin ld doesn't like 0 for these options...
          minor_current=`expr $current + 1`
          verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
          ;;
 
        freebsd-aout)
          major=".$current"
          versuffix=".$current.$revision";
          ;;
 
        freebsd-elf)
          major=".$current"
          versuffix=".$current";
          ;;
 
        irix | nonstopux)
          major=`expr $current - $age + 1`
 
          case $version_type in
            nonstopux) verstring_prefix=nonstopux ;;
            *)         verstring_prefix=sgi ;;
          esac
          verstring="$verstring_prefix$major.$revision"
 
          # Add in all the interfaces that we are compatible with.
          loop=$revision
          while test "$loop" -ne 0; do
            iface=`expr $revision - $loop`
            loop=`expr $loop - 1`
            verstring="$verstring_prefix$major.$iface:$verstring"
          done
 
          # Before this point, $major must not contain `.'.
          major=.$major
          versuffix="$major.$revision"
          ;;
 
        linux)
          major=.`expr $current - $age`
          versuffix="$major.$age.$revision"
          ;;
 
        osf)
          major=.`expr $current - $age`
          versuffix=".$current.$age.$revision"
          verstring="$current.$age.$revision"
 
          # Add in all the interfaces that we are compatible with.
          loop=$age
          while test "$loop" -ne 0; do
            iface=`expr $current - $loop`
            loop=`expr $loop - 1`
            verstring="$verstring:${iface}.0"
          done
 
          # Make executables depend on our current version.
          verstring="$verstring:${current}.0"
          ;;
 
        sunos)
          major=".$current"
          versuffix=".$current.$revision"
          ;;
 
        windows)
          # Use '-' rather than '.', since we only want one
          # extension on DOS 8.3 filesystems.
          major=`expr $current - $age`
          versuffix="-$major"
          ;;
 
        *)
          $echo "$modename: unknown library version type \`$version_type'" 1>&2
          $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
          exit $EXIT_FAILURE
          ;;
        esac
 
        # Clear the version info if we defaulted, and they specified a release.
        if test -z "$vinfo" && test -n "$release"; then
          major=
          case $version_type in
          darwin)
            # we can't check for "0.0" in archive_cmds due to quoting
            # problems, so we reset it completely
            verstring=
            ;;
          *)
            verstring="0.0"
            ;;
          esac
          if test "$need_version" = no; then
            versuffix=
          else
            versuffix=".0.0"
          fi
        fi
 
        # Remove version info from name if versioning should be avoided
        if test "$avoid_version" = yes && test "$need_version" = no; then
          major=
          versuffix=
          verstring=""
        fi
 
        # Check to see if the archive will have undefined symbols.
        if test "$allow_undefined" = yes; then
          if test "$allow_undefined_flag" = unsupported; then
            $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
            build_libtool_libs=no
            build_old_libs=yes
          fi
        else
          # Don't allow undefined symbols.
          allow_undefined_flag="$no_undefined_flag"
        fi
      fi
 
      if test "$mode" != relink; then
        # Remove our outputs, but don't remove object files since they
        # may have been created when compiling PIC objects.
        removelist=
        tempremovelist=`$echo "$output_objdir/*"`
        for p in $tempremovelist; do
          case $p in
            *.$objext)
               ;;
            $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
               if test "X$precious_files_regex" != "X"; then
                 if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
                 then
                   continue
                 fi
               fi
               removelist="$removelist $p"
               ;;
            *) ;;
          esac
        done
        if test -n "$removelist"; then
          $show "${rm}r $removelist"
          $run ${rm}r $removelist
        fi
      fi
 
      # Now set the variables for building old libraries.
      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
        oldlibs="$oldlibs $output_objdir/$libname.$libext"
 
        # Transform .lo files to .o files.
        oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
      fi
 
      # Eliminate all temporary directories.
      for path in $notinst_path; do
        lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'`
        deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'`
        dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'`
      done
 
      if test -n "$xrpath"; then
        # If the user specified any rpath flags, then add them.
        temp_xrpath=
        for libdir in $xrpath; do
          temp_xrpath="$temp_xrpath -R$libdir"
          case "$finalize_rpath " in
          *" $libdir "*) ;;
          *) finalize_rpath="$finalize_rpath $libdir" ;;
          esac
        done
        if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
          dependency_libs="$temp_xrpath $dependency_libs"
        fi
      fi
 
      # Make sure dlfiles contains only unique files that won't be dlpreopened
      old_dlfiles="$dlfiles"
      dlfiles=
      for lib in $old_dlfiles; do
        case " $dlprefiles $dlfiles " in
        *" $lib "*) ;;
        *) dlfiles="$dlfiles $lib" ;;
        esac
      done
 
      # Make sure dlprefiles contains only unique files
      old_dlprefiles="$dlprefiles"
      dlprefiles=
      for lib in $old_dlprefiles; do
        case "$dlprefiles " in
        *" $lib "*) ;;
        *) dlprefiles="$dlprefiles $lib" ;;
        esac
      done
 
      if test "$build_libtool_libs" = yes; then
        if test -n "$rpath"; then
          case $host in
          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
            # these systems don't actually have a c library (as such)!
            ;;
          *-*-rhapsody* | *-*-darwin1.[012])
            # Rhapsody C library is in the System framework
            deplibs="$deplibs -framework System"
            ;;
          *-*-netbsd*)
            # Don't link with libc until the a.out ld.so is fixed.
            ;;
          *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
            # Do not include libc due to us having libc/libc_r.
            test "X$arg" = "X-lc" && continue
            ;;
          *)
            # Add libc to deplibs on all other systems if necessary.
            if test "$build_libtool_need_lc" = "yes"; then
              deplibs="$deplibs -lc"
            fi
            ;;
          esac
        fi
 
        # Transform deplibs into only deplibs that can be linked in shared.
        name_save=$name
        libname_save=$libname
        release_save=$release
        versuffix_save=$versuffix
        major_save=$major
        # I'm not sure if I'm treating the release correctly.  I think
        # release should show up in the -l (ie -lgmp5) so we don't want to
        # add it in twice.  Is that correct?
        release=""
        versuffix=""
        major=""
        newdeplibs=
        droppeddeps=no
        case $deplibs_check_method in
        pass_all)
          # Don't check for shared/static.  Everything works.
          # This might be a little naive.  We might want to check
          # whether the library exists or not.  But this is on
          # osf3 & osf4 and I'm not really sure... Just
          # implementing what was already the behavior.
          newdeplibs=$deplibs
          ;;
        test_compile)
          # This code stresses the "libraries are programs" paradigm to its
          # limits. Maybe even breaks it.  We compile a program, linking it
          # against the deplibs as a proxy for the library.  Then we can check
          # whether they linked in statically or dynamically with ldd.
          $rm conftest.c
          cat > conftest.c <<EOF
          int main() { return 0; }
EOF
          $rm conftest
          $LTCC -o conftest conftest.c $deplibs
          if test "$?" -eq 0 ; then
            ldd_output=`ldd conftest`
            for i in $deplibs; do
              name="`expr $i : '-l\(.*\)'`"
              # If $name is empty we are operating on a -L argument.
              if test "$name" != "" && test "$name" -ne "0"; then
                if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                  case " $predeps $postdeps " in
                  *" $i "*)
                    newdeplibs="$newdeplibs $i"
                    i=""
                    ;;
                  esac
                fi
                if test -n "$i" ; then
                  libname=`eval \\$echo \"$libname_spec\"`
                  deplib_matches=`eval \\$echo \"$library_names_spec\"`
                  set dummy $deplib_matches
                  deplib_match=$2
                  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
                    newdeplibs="$newdeplibs $i"
                  else
                    droppeddeps=yes
                    $echo
                    $echo "*** Warning: dynamic linker does not accept needed library $i."
                    $echo "*** I have the capability to make that library automatically link in when"
                    $echo "*** you link to this library.  But I can only do this if you have a"
                    $echo "*** shared version of the library, which I believe you do not have"
                    $echo "*** because a test_compile did reveal that the linker did not use it for"
                    $echo "*** its dynamic dependency list that programs get resolved with at runtime."
                  fi
                fi
              else
                newdeplibs="$newdeplibs $i"
              fi
            done
          else
            # Error occurred in the first compile.  Let's try to salvage
            # the situation: Compile a separate program for each library.
            for i in $deplibs; do
              name="`expr $i : '-l\(.*\)'`"
              # If $name is empty we are operating on a -L argument.
              if test "$name" != "" && test "$name" != "0"; then
                $rm conftest
                $LTCC -o conftest conftest.c $i
                # Did it work?
                if test "$?" -eq 0 ; then
                  ldd_output=`ldd conftest`
                  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                    case " $predeps $postdeps " in
                    *" $i "*)
                      newdeplibs="$newdeplibs $i"
                      i=""
                      ;;
                    esac
                  fi
                  if test -n "$i" ; then
                    libname=`eval \\$echo \"$libname_spec\"`
                    deplib_matches=`eval \\$echo \"$library_names_spec\"`
                    set dummy $deplib_matches
                    deplib_match=$2
                    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
                      newdeplibs="$newdeplibs $i"
                    else
                      droppeddeps=yes
                      $echo
                      $echo "*** Warning: dynamic linker does not accept needed library $i."
                      $echo "*** I have the capability to make that library automatically link in when"
                      $echo "*** you link to this library.  But I can only do this if you have a"
                      $echo "*** shared version of the library, which you do not appear to have"
                      $echo "*** because a test_compile did reveal that the linker did not use this one"
                      $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
                    fi
                  fi
                else
                  droppeddeps=yes
                  $echo
                  $echo "*** Warning!  Library $i is needed by this library but I was not able to"
                  $echo "***  make it link in!  You will probably need to install it or some"
                  $echo "*** library that it depends on before this library will be fully"
                  $echo "*** functional.  Installing it before continuing would be even better."
                fi
              else
                newdeplibs="$newdeplibs $i"
              fi
            done
          fi
          ;;
        file_magic*)
          set dummy $deplibs_check_method
          file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
          for a_deplib in $deplibs; do
            name="`expr $a_deplib : '-l\(.*\)'`"
            # If $name is empty we are operating on a -L argument.
            if test "$name" != "" && test  "$name" != "0"; then
              if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                case " $predeps $postdeps " in
                *" $a_deplib "*)
                  newdeplibs="$newdeplibs $a_deplib"
                  a_deplib=""
                  ;;
                esac
              fi
              if test -n "$a_deplib" ; then
                libname=`eval \\$echo \"$libname_spec\"`
                for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
                  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
                  for potent_lib in $potential_libs; do
                      # Follow soft links.
                      if ls -lLd "$potent_lib" 2>/dev/null \
                         | grep " -> " >/dev/null; then
                        continue
                      fi
                      # The statement above tries to avoid entering an
                      # endless loop below, in case of cyclic links.
                      # We might still enter an endless loop, since a link
                      # loop can be closed while we follow links,
                      # but so what?
                      potlib="$potent_lib"
                      while test -h "$potlib" 2>/dev/null; do
                        potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
                        case $potliblink in
                        [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
                        *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
                        esac
                      done
                      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
                         | ${SED} 10q \
                         | $EGREP "$file_magic_regex" > /dev/null; then
                        newdeplibs="$newdeplibs $a_deplib"
                        a_deplib=""
                        break 2
                      fi
                  done
                done
              fi
              if test -n "$a_deplib" ; then
                droppeddeps=yes
                $echo
                $echo "*** Warning: linker path does not have real file for library $a_deplib."
                $echo "*** I have the capability to make that library automatically link in when"
                $echo "*** you link to this library.  But I can only do this if you have a"
                $echo "*** shared version of the library, which you do not appear to have"
                $echo "*** because I did check the linker path looking for a file starting"
                if test -z "$potlib" ; then
                  $echo "*** with $libname but no candidates were found. (...for file magic test)"
                else
                  $echo "*** with $libname and none of the candidates passed a file format test"
                  $echo "*** using a file magic. Last file checked: $potlib"
                fi
              fi
            else
              # Add a -L argument.
              newdeplibs="$newdeplibs $a_deplib"
            fi
          done # Gone through all deplibs.
          ;;
        match_pattern*)
          set dummy $deplibs_check_method
          match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
          for a_deplib in $deplibs; do
            name="`expr $a_deplib : '-l\(.*\)'`"
            # If $name is empty we are operating on a -L argument.
            if test -n "$name" && test "$name" != "0"; then
              if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                case " $predeps $postdeps " in
                *" $a_deplib "*)
                  newdeplibs="$newdeplibs $a_deplib"
                  a_deplib=""
                  ;;
                esac
              fi
              if test -n "$a_deplib" ; then
                libname=`eval \\$echo \"$libname_spec\"`
                for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
                  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
                  for potent_lib in $potential_libs; do
                    potlib="$potent_lib" # see symlink-check above in file_magic test
                    if eval $echo \"$potent_lib\" 2>/dev/null \
                        | ${SED} 10q \
                        | $EGREP "$match_pattern_regex" > /dev/null; then
                      newdeplibs="$newdeplibs $a_deplib"
                      a_deplib=""
                      break 2
                    fi
                  done
                done
              fi
              if test -n "$a_deplib" ; then
                droppeddeps=yes
                $echo
                $echo "*** Warning: linker path does not have real file for library $a_deplib."
                $echo "*** I have the capability to make that library automatically link in when"
                $echo "*** you link to this library.  But I can only do this if you have a"
                $echo "*** shared version of the library, which you do not appear to have"
                $echo "*** because I did check the linker path looking for a file starting"
                if test -z "$potlib" ; then
                  $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
                else
                  $echo "*** with $libname and none of the candidates passed a file format test"
                  $echo "*** using a regex pattern. Last file checked: $potlib"
                fi
              fi
            else
              # Add a -L argument.
              newdeplibs="$newdeplibs $a_deplib"
            fi
          done # Gone through all deplibs.
          ;;
        none | unknown | *)
          newdeplibs=""
          tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
            -e 's/ -[LR][^ ]*//g'`
          if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
            for i in $predeps $postdeps ; do
              # can't use Xsed below, because $i might contain '/'
              tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
            done
          fi
          if $echo "X $tmp_deplibs" | $Xsed -e 's/[     ]//g' \
            | grep . >/dev/null; then
            $echo
            if test "X$deplibs_check_method" = "Xnone"; then
              $echo "*** Warning: inter-library dependencies are not supported in this platform."
            else
              $echo "*** Warning: inter-library dependencies are not known to be supported."
            fi
            $echo "*** All declared inter-library dependencies are being dropped."
            droppeddeps=yes
          fi
          ;;
        esac
        versuffix=$versuffix_save
        major=$major_save
        release=$release_save
        libname=$libname_save
        name=$name_save
 
        case $host in
        *-*-rhapsody* | *-*-darwin1.[012])
          # On Rhapsody replace the C library is the System framework
          newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
          ;;
        esac
 
        if test "$droppeddeps" = yes; then
          if test "$module" = yes; then
            $echo
            $echo "*** Warning: libtool could not satisfy all declared inter-library"
            $echo "*** dependencies of module $libname.  Therefore, libtool will create"
            $echo "*** a static module, that should work as long as the dlopening"
            $echo "*** application is linked with the -dlopen flag."
            if test -z "$global_symbol_pipe"; then
              $echo
              $echo "*** However, this would only work if libtool was able to extract symbol"
              $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
              $echo "*** not find such a program.  So, this module is probably useless."
              $echo "*** \`nm' from GNU binutils and a full rebuild may help."
            fi
            if test "$build_old_libs" = no; then
              oldlibs="$output_objdir/$libname.$libext"
              build_libtool_libs=module
              build_old_libs=yes
            else
              build_libtool_libs=no
            fi
          else
            $echo "*** The inter-library dependencies that have been dropped here will be"
            $echo "*** automatically added whenever a program is linked with this library"
            $echo "*** or is declared to -dlopen it."
 
            if test "$allow_undefined" = no; then
              $echo
              $echo "*** Since this library must not contain undefined symbols,"
              $echo "*** because either the platform does not support them or"
              $echo "*** it was explicitly requested with -no-undefined,"
              $echo "*** libtool will only create a static version of it."
              if test "$build_old_libs" = no; then
                oldlibs="$output_objdir/$libname.$libext"
                build_libtool_libs=module
                build_old_libs=yes
              else
                build_libtool_libs=no
              fi
            fi
          fi
        fi
        # Done checking deplibs!
        deplibs=$newdeplibs
      fi
 
      # All the library-specific variables (install_libdir is set above).
      library_names=
      old_library=
      dlname=
 
      # Test again, we may have decided not to build it any more
      if test "$build_libtool_libs" = yes; then
        if test "$hardcode_into_libs" = yes; then
          # Hardcode the library paths
          hardcode_libdirs=
          dep_rpath=
          rpath="$finalize_rpath"
          test "$mode" != relink && rpath="$compile_rpath$rpath"
          for libdir in $rpath; do
            if test -n "$hardcode_libdir_flag_spec"; then
              if test -n "$hardcode_libdir_separator"; then
                if test -z "$hardcode_libdirs"; then
                  hardcode_libdirs="$libdir"
                else
                  # Just accumulate the unique libdirs.
                  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
                  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
                    ;;
                  *)
                    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
                    ;;
                  esac
                fi
              else
                eval flag=\"$hardcode_libdir_flag_spec\"
                dep_rpath="$dep_rpath $flag"
              fi
            elif test -n "$runpath_var"; then
              case "$perm_rpath " in
              *" $libdir "*) ;;
              *) perm_rpath="$perm_rpath $libdir" ;;
              esac
            fi
          done
          # Substitute the hardcoded libdirs into the rpath.
          if test -n "$hardcode_libdir_separator" &&
             test -n "$hardcode_libdirs"; then
            libdir="$hardcode_libdirs"
            if test -n "$hardcode_libdir_flag_spec_ld"; then
              eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
            else
              eval dep_rpath=\"$hardcode_libdir_flag_spec\"
            fi
          fi
          if test -n "$runpath_var" && test -n "$perm_rpath"; then
            # We should set the runpath_var.
            rpath=
            for dir in $perm_rpath; do
              rpath="$rpath$dir:"
            done
            eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
          fi
          test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
        fi
 
        shlibpath="$finalize_shlibpath"
        test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
        if test -n "$shlibpath"; then
          eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
        fi
 
        # Get the real and link names of the library.
        eval shared_ext=\"$shrext_cmds\"
        eval library_names=\"$library_names_spec\"
        set dummy $library_names
        realname="$2"
        shift; shift
 
        if test -n "$soname_spec"; then
          eval soname=\"$soname_spec\"
        else
          soname="$realname"
        fi
        if test -z "$dlname"; then
          dlname=$soname
        fi
 
        lib="$output_objdir/$realname"
        for link
        do
          linknames="$linknames $link"
        done
 
        # Use standard objects if they are pic
        test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
 
        # Prepare the list of exported symbols
        if test -z "$export_symbols"; then
          if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
            $show "generating symbol list for \`$libname.la'"
            export_symbols="$output_objdir/$libname.exp"
            $run $rm $export_symbols
            cmds=$export_symbols_cmds
            save_ifs="$IFS"; IFS='~'
            for cmd in $cmds; do
              IFS="$save_ifs"
              eval cmd=\"$cmd\"
              if len=`expr "X$cmd" : ".*"` &&
               test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
                $show "$cmd"
                $run eval "$cmd" || exit $?
                skipped_export=false
              else
                # The command line is too long to execute in one step.
                $show "using reloadable object file for export list..."
                skipped_export=:
              fi
            done
            IFS="$save_ifs"
            if test -n "$export_symbols_regex"; then
              $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
              $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
              $show "$mv \"${export_symbols}T\" \"$export_symbols\""
              $run eval '$mv "${export_symbols}T" "$export_symbols"'
            fi
          fi
        fi
 
        if test -n "$export_symbols" && test -n "$include_expsyms"; then
          $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
        fi
 
        tmp_deplibs=
        for test_deplib in $deplibs; do
                case " $convenience " in
                *" $test_deplib "*) ;;
                *)
                        tmp_deplibs="$tmp_deplibs $test_deplib"
                        ;;
                esac
        done
        deplibs="$tmp_deplibs"
 
        if test -n "$convenience"; then
          if test -n "$whole_archive_flag_spec"; then
            save_libobjs=$libobjs
            eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
          else
            gentop="$output_objdir/${outputname}x"
            generated="$generated $gentop"
 
            func_extract_archives $gentop $convenience
            libobjs="$libobjs $func_extract_archives_result"
          fi
        fi
 
        if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
          eval flag=\"$thread_safe_flag_spec\"
          linker_flags="$linker_flags $flag"
        fi
 
        # Make a backup of the uninstalled library when relinking
        if test "$mode" = relink; then
          $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
        fi
 
        # Do each of the archive commands.
        if test "$module" = yes && test -n "$module_cmds" ; then
          if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
            eval test_cmds=\"$module_expsym_cmds\"
            cmds=$module_expsym_cmds
          else
            eval test_cmds=\"$module_cmds\"
            cmds=$module_cmds
          fi
        else
        if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
          eval test_cmds=\"$archive_expsym_cmds\"
          cmds=$archive_expsym_cmds
        else
          eval test_cmds=\"$archive_cmds\"
          cmds=$archive_cmds
          fi
        fi
 
        if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*"` &&
           test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
          :
        else
          # The command line is too long to link in one step, link piecewise.
          $echo "creating reloadable object files..."
 
          # Save the value of $output and $libobjs because we want to
          # use them later.  If we have whole_archive_flag_spec, we
          # want to use save_libobjs as it was before
          # whole_archive_flag_spec was expanded, because we can't
          # assume the linker understands whole_archive_flag_spec.
          # This may have to be revisited, in case too many
          # convenience libraries get linked in and end up exceeding
          # the spec.
          if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
            save_libobjs=$libobjs
          fi
          save_output=$output
          output_la=`$echo "X$output" | $Xsed -e "$basename"`
 
          # Clear the reloadable object creation command queue and
          # initialize k to one.
          test_cmds=
          concat_cmds=
          objlist=
          delfiles=
          last_robj=
          k=1
          output=$output_objdir/$output_la-${k}.$objext
          # Loop over the list of objects to be linked.
          for obj in $save_libobjs
          do
            eval test_cmds=\"$reload_cmds $objlist $last_robj\"
            if test "X$objlist" = X ||
               { len=`expr "X$test_cmds" : ".*"` &&
                 test "$len" -le "$max_cmd_len"; }; then
              objlist="$objlist $obj"
            else
              # The command $test_cmds is almost too long, add a
              # command to the queue.
              if test "$k" -eq 1 ; then
                # The first file doesn't have a previous command to add.
                eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
              else
                # All subsequent reloadable object files will link in
                # the last one created.
                eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
              fi
              last_robj=$output_objdir/$output_la-${k}.$objext
              k=`expr $k + 1`
              output=$output_objdir/$output_la-${k}.$objext
              objlist=$obj
              len=1
            fi
          done
          # Handle the remaining objects by creating one last
          # reloadable object file.  All subsequent reloadable object
          # files will link in the last one created.
          test -z "$concat_cmds" || concat_cmds=$concat_cmds~
          eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
 
          if ${skipped_export-false}; then
            $show "generating symbol list for \`$libname.la'"
            export_symbols="$output_objdir/$libname.exp"
            $run $rm $export_symbols
            libobjs=$output
            # Append the command to create the export file.
            eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
          fi
 
          # Set up a command to remove the reloadable object files
          # after they are used.
          i=0
          while test "$i" -lt "$k"
          do
            i=`expr $i + 1`
            delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
          done
 
          $echo "creating a temporary reloadable object file: $output"
 
          # Loop through the commands generated above and execute them.
          save_ifs="$IFS"; IFS='~'
          for cmd in $concat_cmds; do
            IFS="$save_ifs"
            $show "$cmd"
            $run eval "$cmd" || exit $?
          done
          IFS="$save_ifs"
 
          libobjs=$output
          # Restore the value of output.
          output=$save_output
 
          if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
            eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
          fi
          # Expand the library linking commands again to reset the
          # value of $libobjs for piecewise linking.
 
          # Do each of the archive commands.
          if test "$module" = yes && test -n "$module_cmds" ; then
            if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
              cmds=$module_expsym_cmds
            else
              cmds=$module_cmds
            fi
          else
          if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
            cmds=$archive_expsym_cmds
          else
            cmds=$archive_cmds
            fi
          fi
 
          # Append the command to remove the reloadable object files
          # to the just-reset $cmds.
          eval cmds=\"\$cmds~\$rm $delfiles\"
        fi
        save_ifs="$IFS"; IFS='~'
        for cmd in $cmds; do
          IFS="$save_ifs"
          eval cmd=\"$cmd\"
          $show "$cmd"
          $run eval "$cmd" || exit $?
        done
        IFS="$save_ifs"
 
        # Restore the uninstalled library and exit
        if test "$mode" = relink; then
          $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
          exit $EXIT_SUCCESS
        fi
 
        # Create links to the real library.
        for linkname in $linknames; do
          if test "$realname" != "$linkname"; then
            $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
            $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
          fi
        done
 
        # If -module or -export-dynamic was specified, set the dlname.
        if test "$module" = yes || test "$export_dynamic" = yes; then
          # On all known operating systems, these are identical.
          dlname="$soname"
        fi
      fi
      ;;
 
    obj)
      if test -n "$deplibs"; then
        $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
      fi
 
      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
        $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
      fi
 
      if test -n "$rpath"; then
        $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
      fi
 
      if test -n "$xrpath"; then
        $echo "$modename: warning: \`-R' is ignored for objects" 1>&2
      fi
 
      if test -n "$vinfo"; then
        $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
      fi
 
      if test -n "$release"; then
        $echo "$modename: warning: \`-release' is ignored for objects" 1>&2
      fi
 
      case $output in
      *.lo)
        if test -n "$objs$old_deplibs"; then
          $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
          exit $EXIT_FAILURE
        fi
        libobj="$output"
        obj=`$echo "X$output" | $Xsed -e "$lo2o"`
        ;;
      *)
        libobj=
        obj="$output"
        ;;
      esac
 
      # Delete the old objects.
      $run $rm $obj $libobj
 
      # Objects from convenience libraries.  This assumes
      # single-version convenience libraries.  Whenever we create
      # different ones for PIC/non-PIC, this we'll have to duplicate
      # the extraction.
      reload_conv_objs=
      gentop=
      # reload_cmds runs $LD directly, so let us get rid of
      # -Wl from whole_archive_flag_spec
      wl=
 
      if test -n "$convenience"; then
        if test -n "$whole_archive_flag_spec"; then
          eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
        else
          gentop="$output_objdir/${obj}x"
          generated="$generated $gentop"
 
          func_extract_archives $gentop $convenience
          reload_conv_objs="$reload_objs $func_extract_archives_result"
        fi
      fi
 
      # Create the old-style object.
      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
 
      output="$obj"
      cmds=$reload_cmds
      save_ifs="$IFS"; IFS='~'
      for cmd in $cmds; do
        IFS="$save_ifs"
        eval cmd=\"$cmd\"
        $show "$cmd"
        $run eval "$cmd" || exit $?
      done
      IFS="$save_ifs"
 
      # Exit if we aren't doing a library object file.
      if test -z "$libobj"; then
        if test -n "$gentop"; then
          $show "${rm}r $gentop"
          $run ${rm}r $gentop
        fi
 
        exit $EXIT_SUCCESS
      fi
 
      if test "$build_libtool_libs" != yes; then
        if test -n "$gentop"; then
          $show "${rm}r $gentop"
          $run ${rm}r $gentop
        fi
 
        # Create an invalid libtool object if no PIC, so that we don't
        # accidentally link it into a program.
        # $show "echo timestamp > $libobj"
        # $run eval "echo timestamp > $libobj" || exit $?
        exit $EXIT_SUCCESS
      fi
 
      if test -n "$pic_flag" || test "$pic_mode" != default; then
        # Only do commands if we really have different PIC objects.
        reload_objs="$libobjs $reload_conv_objs"
        output="$libobj"
        cmds=$reload_cmds
        save_ifs="$IFS"; IFS='~'
        for cmd in $cmds; do
          IFS="$save_ifs"
          eval cmd=\"$cmd\"
          $show "$cmd"
          $run eval "$cmd" || exit $?
        done
        IFS="$save_ifs"
      fi
 
      if test -n "$gentop"; then
        $show "${rm}r $gentop"
        $run ${rm}r $gentop
      fi
 
      exit $EXIT_SUCCESS
      ;;
 
    prog)
      case $host in
        *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
      esac
      if test -n "$vinfo"; then
        $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
      fi
 
      if test -n "$release"; then
        $echo "$modename: warning: \`-release' is ignored for programs" 1>&2
      fi
 
      if test "$preload" = yes; then
        if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
           test "$dlopen_self_static" = unknown; then
          $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
        fi
      fi
 
      case $host in
      *-*-rhapsody* | *-*-darwin1.[012])
        # On Rhapsody replace the C library is the System framework
        compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
        finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
        ;;
      esac
 
      case $host in
      *darwin*)
        # Don't allow lazy linking, it breaks C++ global constructors
        if test "$tagname" = CXX ; then
        compile_command="$compile_command ${wl}-bind_at_load"
        finalize_command="$finalize_command ${wl}-bind_at_load"
        fi
        ;;
      esac
 
      compile_command="$compile_command $compile_deplibs"
      finalize_command="$finalize_command $finalize_deplibs"
 
      if test -n "$rpath$xrpath"; then
        # If the user specified any rpath flags, then add them.
        for libdir in $rpath $xrpath; do
          # This is the magic to use -rpath.
          case "$finalize_rpath " in
          *" $libdir "*) ;;
          *) finalize_rpath="$finalize_rpath $libdir" ;;
          esac
        done
      fi
 
      # Now hardcode the library paths
      rpath=
      hardcode_libdirs=
      for libdir in $compile_rpath $finalize_rpath; do
        if test -n "$hardcode_libdir_flag_spec"; then
          if test -n "$hardcode_libdir_separator"; then
            if test -z "$hardcode_libdirs"; then
              hardcode_libdirs="$libdir"
            else
              # Just accumulate the unique libdirs.
              case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
              *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
                ;;
              *)
                hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
                ;;
              esac
            fi
          else
            eval flag=\"$hardcode_libdir_flag_spec\"
            rpath="$rpath $flag"
          fi
        elif test -n "$runpath_var"; then
          case "$perm_rpath " in
          *" $libdir "*) ;;
          *) perm_rpath="$perm_rpath $libdir" ;;
          esac
        fi
        case $host in
        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
          case :$dllsearchpath: in
          *":$libdir:"*) ;;
          *) dllsearchpath="$dllsearchpath:$libdir";;
          esac
          ;;
        esac
      done
      # Substitute the hardcoded libdirs into the rpath.
      if test -n "$hardcode_libdir_separator" &&
         test -n "$hardcode_libdirs"; then
        libdir="$hardcode_libdirs"
        eval rpath=\" $hardcode_libdir_flag_spec\"
      fi
      compile_rpath="$rpath"
 
      rpath=
      hardcode_libdirs=
      for libdir in $finalize_rpath; do
        if test -n "$hardcode_libdir_flag_spec"; then
          if test -n "$hardcode_libdir_separator"; then
            if test -z "$hardcode_libdirs"; then
              hardcode_libdirs="$libdir"
            else
              # Just accumulate the unique libdirs.
              case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
              *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
                ;;
              *)
                hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
                ;;
              esac
            fi
          else
            eval flag=\"$hardcode_libdir_flag_spec\"
            rpath="$rpath $flag"
          fi
        elif test -n "$runpath_var"; then
          case "$finalize_perm_rpath " in
          *" $libdir "*) ;;
          *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
          esac
        fi
      done
      # Substitute the hardcoded libdirs into the rpath.
      if test -n "$hardcode_libdir_separator" &&
         test -n "$hardcode_libdirs"; then
        libdir="$hardcode_libdirs"
        eval rpath=\" $hardcode_libdir_flag_spec\"
      fi
      finalize_rpath="$rpath"
 
      if test -n "$libobjs" && test "$build_old_libs" = yes; then
        # Transform all the library objects into standard objects.
        compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
        finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
      fi
 
      dlsyms=
      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
        if test -n "$NM" && test -n "$global_symbol_pipe"; then
          dlsyms="${outputname}S.c"
        else
          $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
        fi
      fi
 
      if test -n "$dlsyms"; then
        case $dlsyms in
        "") ;;
        *.c)
          # Discover the nlist of each of the dlfiles.
          nlist="$output_objdir/${outputname}.nm"
 
          $show "$rm $nlist ${nlist}S ${nlist}T"
          $run $rm "$nlist" "${nlist}S" "${nlist}T"
 
          # Parse the name list into a source file.
          $show "creating $output_objdir/$dlsyms"
 
          test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
 
#ifdef __cplusplus
extern \"C\" {
#endif
 
/* Prevent the only kind of declaration conflicts we can make. */
#define lt_preloaded_symbols some_other_symbol
 
/* External symbol declarations for the compiler. */\
"
 
          if test "$dlself" = yes; then
            $show "generating symbol list for \`$output'"
 
            test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
 
            # Add our own program objects to the symbol list.
            progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
            for arg in $progfiles; do
              $show "extracting global C symbols from \`$arg'"
              $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
            done
 
            if test -n "$exclude_expsyms"; then
              $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
              $run eval '$mv "$nlist"T "$nlist"'
            fi
 
            if test -n "$export_symbols_regex"; then
              $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
              $run eval '$mv "$nlist"T "$nlist"'
            fi
 
            # Prepare the list of exported symbols
            if test -z "$export_symbols"; then
              export_symbols="$output_objdir/$outputname.exp"
              $run $rm $export_symbols
              $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
            else
              $run eval "${SED} -e 's/\([ ][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
              $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
              $run eval 'mv "$nlist"T "$nlist"'
            fi
          fi
 
          for arg in $dlprefiles; do
            $show "extracting global C symbols from \`$arg'"
            name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
            $run eval '$echo ": $name " >> "$nlist"'
            $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
          done
 
          if test -z "$run"; then
            # Make sure we have at least an empty file.
            test -f "$nlist" || : > "$nlist"
 
            if test -n "$exclude_expsyms"; then
              $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
              $mv "$nlist"T "$nlist"
            fi
 
            # Try sorting and uniquifying the output.
            if grep -v "^: " < "$nlist" |
                if sort -k 3 </dev/null >/dev/null 2>&1; then
                  sort -k 3
                else
                  sort +2
                fi |
                uniq > "$nlist"S; then
              :
            else
              grep -v "^: " < "$nlist" > "$nlist"S
            fi
 
            if test -f "$nlist"S; then
              eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
            else
              $echo '/* NONE */' >> "$output_objdir/$dlsyms"
            fi
 
            $echo >> "$output_objdir/$dlsyms" "\
 
#undef lt_preloaded_symbols
 
#if defined (__STDC__) && __STDC__
# define lt_ptr void *
#else
# define lt_ptr char *
# define const
#endif
 
/* The mapping between symbol names and symbols. */
"
 
            case $host in
            *cygwin* | *mingw* )
          $echo >> "$output_objdir/$dlsyms" "\
/* DATA imports from DLLs on WIN32 can't be const, because
   runtime relocations are performed -- see ld's documentation
   on pseudo-relocs */
struct {
"
              ;;
            * )
          $echo >> "$output_objdir/$dlsyms" "\
const struct {
"
              ;;
            esac
 
 
          $echo >> "$output_objdir/$dlsyms" "\
  const char *name;
  lt_ptr address;
}
lt_preloaded_symbols[] =
{\
"
 
            eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
 
            $echo >> "$output_objdir/$dlsyms" "\
  {0, (lt_ptr) 0}
};
 
/* This works around a problem in FreeBSD linker */
#ifdef FREEBSD_WORKAROUND
static const void *lt_preloaded_setup() {
  return lt_preloaded_symbols;
}
#endif
 
#ifdef __cplusplus
}
#endif\
"
          fi
 
          pic_flag_for_symtable=
          case $host in
          # compiling the symbol table file with pic_flag works around
          # a FreeBSD bug that causes programs to crash when -lm is
          # linked before any other PIC object.  But we must not use
          # pic_flag when linking with -static.  The problem exists in
          # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
          *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
            case "$compile_command " in
            *" -static "*) ;;
            *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
            esac;;
          *-*-hpux*)
            case "$compile_command " in
            *" -static "*) ;;
            *) pic_flag_for_symtable=" $pic_flag";;
            esac
          esac
 
          # Now compile the dynamic symbol file.
          $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
          $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
 
          # Clean up the generated files.
          $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
          $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
 
          # Transform the symbol file into the correct name.
          compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
          finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
          ;;
        *)
          $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
          exit $EXIT_FAILURE
          ;;
        esac
      else
        # We keep going just in case the user didn't refer to
        # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
        # really was required.
 
        # Nullify the symbol file.
        compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
        finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
      fi
 
      if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
        # Replace the output file specification.
        compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
        link_command="$compile_command$compile_rpath"
 
        # We have no uninstalled library dependencies, so finalize right now.
        $show "$link_command"
        $run eval "$link_command"
        status=$?
 
        # Delete the generated files.
        if test -n "$dlsyms"; then
          $show "$rm $output_objdir/${outputname}S.${objext}"
          $run $rm "$output_objdir/${outputname}S.${objext}"
        fi
 
        exit $status
      fi
 
      if test -n "$shlibpath_var"; then
        # We should set the shlibpath_var
        rpath=
        for dir in $temp_rpath; do
          case $dir in
          [\\/]* | [A-Za-z]:[\\/]*)
            # Absolute path.
            rpath="$rpath$dir:"
            ;;
          *)
            # Relative path: add a thisdir entry.
            rpath="$rpath\$thisdir/$dir:"
            ;;
          esac
        done
        temp_rpath="$rpath"
      fi
 
      if test -n "$compile_shlibpath$finalize_shlibpath"; then
        compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
      fi
      if test -n "$finalize_shlibpath"; then
        finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
      fi
 
      compile_var=
      finalize_var=
      if test -n "$runpath_var"; then
        if test -n "$perm_rpath"; then
          # We should set the runpath_var.
          rpath=
          for dir in $perm_rpath; do
            rpath="$rpath$dir:"
          done
          compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
        fi
        if test -n "$finalize_perm_rpath"; then
          # We should set the runpath_var.
          rpath=
          for dir in $finalize_perm_rpath; do
            rpath="$rpath$dir:"
          done
          finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
        fi
      fi
 
      if test "$no_install" = yes; then
        # We don't need to create a wrapper script.
        link_command="$compile_var$compile_command$compile_rpath"
        # Replace the output file specification.
        link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
        # Delete the old output file.
        $run $rm $output
        # Link the executable and exit
        $show "$link_command"
        $run eval "$link_command" || exit $?
        exit $EXIT_SUCCESS
      fi
 
      if test "$hardcode_action" = relink; then
        # Fast installation is not supported
        link_command="$compile_var$compile_command$compile_rpath"
        relink_command="$finalize_var$finalize_command$finalize_rpath"
 
        $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
        $echo "$modename: \`$output' will be relinked during installation" 1>&2
      else
        if test "$fast_install" != no; then
          link_command="$finalize_var$compile_command$finalize_rpath"
          if test "$fast_install" = yes; then
            relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
          else
            # fast_install is set to needless
            relink_command=
          fi
        else
          link_command="$compile_var$compile_command$compile_rpath"
          relink_command="$finalize_var$finalize_command$finalize_rpath"
        fi
      fi
 
      # Replace the output file specification.
      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
 
      # Delete the old output files.
      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
 
      $show "$link_command"
      $run eval "$link_command" || exit $?
 
      # Now create the wrapper script.
      $show "creating $output"
 
      # Quote the relink command for shipping.
      if test -n "$relink_command"; then
        # Preserve any variables that may affect compiler behavior
        for var in $variables_saved_for_relink; do
          if eval test -z \"\${$var+set}\"; then
            relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
          elif eval var_value=\$$var; test -z "$var_value"; then
            relink_command="$var=; export $var; $relink_command"
          else
            var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
            relink_command="$var=\"$var_value\"; export $var; $relink_command"
          fi
        done
        relink_command="(cd `pwd`; $relink_command)"
        relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
      fi
 
      # Quote $echo for shipping.
      if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
        case $progpath in
        [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
        *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
        esac
        qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
      else
        qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
      fi
 
      # Only actually do things if our run command is non-null.
      if test -z "$run"; then
        # win32 will think the script is a binary if it has
        # a .exe suffix, so we strip it off here.
        case $output in
          *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
        esac
        # test for cygwin because mv fails w/o .exe extensions
        case $host in
          *cygwin*)
            exeext=.exe
            outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
          *) exeext= ;;
        esac
        case $host in
          *cygwin* | *mingw* )
            cwrappersource=`$echo ${objdir}/lt-${outputname}.c`
            cwrapper=`$echo ${output}.exe`
            $rm $cwrappersource $cwrapper
            trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
 
            cat > $cwrappersource <<EOF
 
/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
   Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
 
   The $output program cannot be directly executed until all the libtool
   libraries that it depends on are installed.
 
   This wrapper executable should never be moved out of the build directory.
   If it is, it will not operate correctly.
 
   Currently, it simply execs the wrapper *script* "/bin/sh $output",
   but could eventually absorb all of the scripts functionality and
   exec $objdir/$outputname directly.
*/
EOF
            cat >> $cwrappersource<<"EOF"
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <malloc.h>
#include <stdarg.h>
#include <assert.h>
 
#if defined(PATH_MAX)
# define LT_PATHMAX PATH_MAX
#elif defined(MAXPATHLEN)
# define LT_PATHMAX MAXPATHLEN
#else
# define LT_PATHMAX 1024
#endif
 
#ifndef DIR_SEPARATOR
#define DIR_SEPARATOR '/'
#endif
 
#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
  defined (__OS2__)
#define HAVE_DOS_BASED_FILE_SYSTEM
#ifndef DIR_SEPARATOR_2
#define DIR_SEPARATOR_2 '\\'
#endif
#endif
 
#ifndef DIR_SEPARATOR_2
# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
#else /* DIR_SEPARATOR_2 */
# define IS_DIR_SEPARATOR(ch) \
        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
#endif /* DIR_SEPARATOR_2 */
 
#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
#define XFREE(stale) do { \
  if (stale) { free ((void *) stale); stale = 0; } \
} while (0)
 
const char *program_name = NULL;
 
void * xmalloc (size_t num);
char * xstrdup (const char *string);
char * basename (const char *name);
char * fnqualify(const char *path);
char * strendzap(char *str, const char *pat);
void lt_fatal (const char *message, ...);
 
int
main (int argc, char *argv[])
{
  char **newargz;
  int i;
 
  program_name = (char *) xstrdup ((char *) basename (argv[0]));
  newargz = XMALLOC(char *, argc+2);
EOF
 
            cat >> $cwrappersource <<EOF
  newargz[0] = "$SHELL";
EOF
 
            cat >> $cwrappersource <<"EOF"
  newargz[1] = fnqualify(argv[0]);
  /* we know the script has the same name, without the .exe */
  /* so make sure newargz[1] doesn't end in .exe */
  strendzap(newargz[1],".exe");
  for (i = 1; i < argc; i++)
    newargz[i+1] = xstrdup(argv[i]);
  newargz[argc+1] = NULL;
EOF
 
            cat >> $cwrappersource <<EOF
  execv("$SHELL",newargz);
EOF
 
            cat >> $cwrappersource <<"EOF"
}
 
void *
xmalloc (size_t num)
{
  void * p = (void *) malloc (num);
  if (!p)
    lt_fatal ("Memory exhausted");
 
  return p;
}
 
char *
xstrdup (const char *string)
{
  return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
;
}
 
char *
basename (const char *name)
{
  const char *base;
 
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
  /* Skip over the disk name in MSDOS pathnames. */
  if (isalpha (name[0]) && name[1] == ':')
    name += 2;
#endif
 
  for (base = name; *name; name++)
    if (IS_DIR_SEPARATOR (*name))
      base = name + 1;
  return (char *) base;
}
 
char *
fnqualify(const char *path)
{
  size_t size;
  char *p;
  char tmp[LT_PATHMAX + 1];
 
  assert(path != NULL);
 
  /* Is it qualified already? */
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
  if (isalpha (path[0]) && path[1] == ':')
    return xstrdup (path);
#endif
  if (IS_DIR_SEPARATOR (path[0]))
    return xstrdup (path);
 
  /* prepend the current directory */
  /* doesn't handle '~' */
  if (getcwd (tmp, LT_PATHMAX) == NULL)
    lt_fatal ("getcwd failed");
  size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */
  p = XMALLOC(char, size);
  sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path);
  return p;
}
 
char *
strendzap(char *str, const char *pat)
{
  size_t len, patlen;
 
  assert(str != NULL);
  assert(pat != NULL);
 
  len = strlen(str);
  patlen = strlen(pat);
 
  if (patlen <= len)
  {
    str += len - patlen;
    if (strcmp(str, pat) == 0)
      *str = '\0';
  }
  return str;
}
 
static void
lt_error_core (int exit_status, const char * mode,
          const char * message, va_list ap)
{
  fprintf (stderr, "%s: %s: ", program_name, mode);
  vfprintf (stderr, message, ap);
  fprintf (stderr, ".\n");
 
  if (exit_status >= 0)
    exit (exit_status);
}
 
void
lt_fatal (const char *message, ...)
{
  va_list ap;
  va_start (ap, message);
  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
  va_end (ap);
}
EOF
          # we should really use a build-platform specific compiler
          # here, but OTOH, the wrappers (shell script and this C one)
          # are only useful if you want to execute the "real" binary.
          # Since the "real" binary is built for $host, then this
          # wrapper might as well be built for $host, too.
          $run $LTCC -s -o $cwrapper $cwrappersource
          ;;
        esac
        $rm $output
        trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
 
        $echo > $output "\
#! $SHELL
 
# $output - temporary wrapper script for $objdir/$outputname
# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
#
# The $output program cannot be directly executed until all the libtool
# libraries that it depends on are installed.
#
# This wrapper script should never be moved out of the build directory.
# If it is, it will not operate correctly.
 
# Sed substitution that helps us do robust quoting.  It backslashifies
# metacharacters that are still active within double-quoted strings.
Xsed='${SED} -e 1s/^X//'
sed_quote_subst='$sed_quote_subst'
 
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
relink_command=\"$relink_command\"
 
# This environment variable determines our operation mode.
if test \"\$libtool_install_magic\" = \"$magic\"; then
  # install mode needs the following variable:
  notinst_deplibs='$notinst_deplibs'
else
  # When we are sourced in execute mode, \$file and \$echo are already set.
  if test \"\$libtool_execute_magic\" != \"$magic\"; then
    echo=\"$qecho\"
    file=\"\$0\"
    # Make sure echo works.
    if test \"X\$1\" = X--no-reexec; then
      # Discard the --no-reexec flag, and continue.
      shift
    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
      # Yippee, \$echo works!
      :
    else
      # Restart under the correct shell, and then maybe \$echo will work.
      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
    fi
  fi\
"
        $echo >> $output "\
 
  # Find the directory that this script lives in.
  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
 
  # Follow symbolic links until we get to the real thisdir.
  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
  while test -n \"\$file\"; do
    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
 
    # If there was a directory component, then change thisdir.
    if test \"x\$destdir\" != \"x\$file\"; then
      case \"\$destdir\" in
      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
      *) thisdir=\"\$thisdir/\$destdir\" ;;
      esac
    fi
 
    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
  done
 
  # Try to get the absolute directory name.
  absdir=\`cd \"\$thisdir\" && pwd\`
  test -n \"\$absdir\" && thisdir=\"\$absdir\"
"
 
        if test "$fast_install" = yes; then
          $echo >> $output "\
  program=lt-'$outputname'$exeext
  progdir=\"\$thisdir/$objdir\"
 
  if test ! -f \"\$progdir/\$program\" || \\
     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
 
    file=\"\$\$-\$program\"
 
    if test ! -d \"\$progdir\"; then
      $mkdir \"\$progdir\"
    else
      $rm \"\$progdir/\$file\"
    fi"
 
          $echo >> $output "\
 
    # relink executable if necessary
    if test -n \"\$relink_command\"; then
      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
      else
        $echo \"\$relink_command_output\" >&2
        $rm \"\$progdir/\$file\"
        exit $EXIT_FAILURE
      fi
    fi
 
    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
    { $rm \"\$progdir/\$program\";
      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
    $rm \"\$progdir/\$file\"
  fi"
        else
          $echo >> $output "\
  program='$outputname'
  progdir=\"\$thisdir/$objdir\"
"
        fi
 
        $echo >> $output "\
 
  if test -f \"\$progdir/\$program\"; then"
 
        # Export our shlibpath_var if we have one.
        if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
          $echo >> $output "\
    # Add our own library path to $shlibpath_var
    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
 
    # Some systems cannot cope with colon-terminated $shlibpath_var
    # The second colon is a workaround for a bug in BeOS R4 sed
    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
 
    export $shlibpath_var
"
        fi
 
        # fixup the dll searchpath if we need to.
        if test -n "$dllsearchpath"; then
          $echo >> $output "\
    # Add the dll search path components to the executable PATH
    PATH=$dllsearchpath:\$PATH
"
        fi
 
        $echo >> $output "\
    if test \"\$libtool_execute_magic\" != \"$magic\"; then
      # Run the actual program with our arguments.
"
        case $host in
        # Backslashes separate directories on plain windows
        *-*-mingw | *-*-os2*)
          $echo >> $output "\
      exec \$progdir\\\\\$program \${1+\"\$@\"}
"
          ;;
 
        *)
          $echo >> $output "\
      exec \$progdir/\$program \${1+\"\$@\"}
"
          ;;
        esac
        $echo >> $output "\
      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
      exit $EXIT_FAILURE
    fi
  else
    # The program doesn't exist.
    \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
    \$echo \"This script is just a wrapper for \$program.\" 1>&2
    $echo \"See the $PACKAGE documentation for more information.\" 1>&2
    exit $EXIT_FAILURE
  fi
fi\
"
        chmod +x $output
      fi
      exit $EXIT_SUCCESS
      ;;
    esac
 
    # See if we need to build an old-fashioned archive.
    for oldlib in $oldlibs; do
 
      if test "$build_libtool_libs" = convenience; then
        oldobjs="$libobjs_save"
        addlibs="$convenience"
        build_libtool_libs=no
      else
        if test "$build_libtool_libs" = module; then
          oldobjs="$libobjs_save"
          build_libtool_libs=no
        else
          oldobjs="$old_deplibs $non_pic_objects"
        fi
        addlibs="$old_convenience"
      fi
 
      if test -n "$addlibs"; then
        gentop="$output_objdir/${outputname}x"
        generated="$generated $gentop"
 
        func_extract_archives $gentop $addlibs
        oldobjs="$oldobjs $func_extract_archives_result"
      fi
 
      # Do each command in the archive commands.
      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
       cmds=$old_archive_from_new_cmds
      else
        # POSIX demands no paths to be encoded in archives.  We have
        # to avoid creating archives with duplicate basenames if we
        # might have to extract them afterwards, e.g., when creating a
        # static archive out of a convenience library, or when linking
        # the entirety of a libtool archive into another (currently
        # not supported by libtool).
        if (for obj in $oldobjs
            do
              $echo "X$obj" | $Xsed -e 's%^.*/%%'
            done | sort | sort -uc >/dev/null 2>&1); then
          :
        else
          $echo "copying selected object files to avoid basename conflicts..."
 
          if test -z "$gentop"; then
            gentop="$output_objdir/${outputname}x"
            generated="$generated $gentop"
 
            $show "${rm}r $gentop"
            $run ${rm}r "$gentop"
            $show "$mkdir $gentop"
            $run $mkdir "$gentop"
            status=$?
            if test "$status" -ne 0 && test ! -d "$gentop"; then
              exit $status
            fi
          fi
 
          save_oldobjs=$oldobjs
          oldobjs=
          counter=1
          for obj in $save_oldobjs
          do
            objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
            case " $oldobjs " in
            " ") oldobjs=$obj ;;
            *[\ /]"$objbase "*)
              while :; do
                # Make sure we don't pick an alternate name that also
                # overlaps.
                newobj=lt$counter-$objbase
                counter=`expr $counter + 1`
                case " $oldobjs " in
                *[\ /]"$newobj "*) ;;
                *) if test ! -f "$gentop/$newobj"; then break; fi ;;
                esac
              done
              $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
              $run ln "$obj" "$gentop/$newobj" ||
              $run cp "$obj" "$gentop/$newobj"
              oldobjs="$oldobjs $gentop/$newobj"
              ;;
            *) oldobjs="$oldobjs $obj" ;;
            esac
          done
        fi
 
        eval cmds=\"$old_archive_cmds\"
 
        if len=`expr "X$cmds" : ".*"` &&
             test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
          cmds=$old_archive_cmds
        else
          # the command line is too long to link in one step, link in parts
          $echo "using piecewise archive linking..."
          save_RANLIB=$RANLIB
          RANLIB=:
          objlist=
          concat_cmds=
          save_oldobjs=$oldobjs
 
          # Is there a better way of finding the last object in the list?
          for obj in $save_oldobjs
          do
            last_oldobj=$obj
          done
          for obj in $save_oldobjs
          do
            oldobjs="$objlist $obj"
            objlist="$objlist $obj"
            eval test_cmds=\"$old_archive_cmds\"
            if len=`expr "X$test_cmds" : ".*"` &&
               test "$len" -le "$max_cmd_len"; then
              :
            else
              # the above command should be used before it gets too long
              oldobjs=$objlist
              if test "$obj" = "$last_oldobj" ; then
                RANLIB=$save_RANLIB
              fi
              test -z "$concat_cmds" || concat_cmds=$concat_cmds~
              eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
              objlist=
            fi
          done
          RANLIB=$save_RANLIB
          oldobjs=$objlist
          if test "X$oldobjs" = "X" ; then
            eval cmds=\"\$concat_cmds\"
          else
            eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
          fi
        fi
      fi
      save_ifs="$IFS"; IFS='~'
      for cmd in $cmds; do
        eval cmd=\"$cmd\"
        IFS="$save_ifs"
        $show "$cmd"
        $run eval "$cmd" || exit $?
      done
      IFS="$save_ifs"
    done
 
    if test -n "$generated"; then
      $show "${rm}r$generated"
      $run ${rm}r$generated
    fi
 
    # Now create the libtool archive.
    case $output in
    *.la)
      old_library=
      test "$build_old_libs" = yes && old_library="$libname.$libext"
      $show "creating $output"
 
      # Preserve any variables that may affect compiler behavior
      for var in $variables_saved_for_relink; do
        if eval test -z \"\${$var+set}\"; then
          relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
        elif eval var_value=\$$var; test -z "$var_value"; then
          relink_command="$var=; export $var; $relink_command"
        else
          var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
          relink_command="$var=\"$var_value\"; export $var; $relink_command"
        fi
      done
      # Quote the link command for shipping.
      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
      relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
      if test "$hardcode_automatic" = yes ; then
        relink_command=
      fi
 
 
      # Only create the output if not a dry run.
      if test -z "$run"; then
        for installed in no yes; do
          if test "$installed" = yes; then
            if test -z "$install_libdir"; then
              break
            fi
            output="$output_objdir/$outputname"i
            # Replace all uninstalled libtool libraries with the installed ones
            newdependency_libs=
            for deplib in $dependency_libs; do
              case $deplib in
              *.la)
                name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
                if test -z "$libdir"; then
                  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
                  exit $EXIT_FAILURE
                fi
                newdependency_libs="$newdependency_libs $libdir/$name"
                ;;
              *) newdependency_libs="$newdependency_libs $deplib" ;;
              esac
            done
            dependency_libs="$newdependency_libs"
            newdlfiles=
            for lib in $dlfiles; do
              name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
              eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
              if test -z "$libdir"; then
                $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
                exit $EXIT_FAILURE
              fi
              newdlfiles="$newdlfiles $libdir/$name"
            done
            dlfiles="$newdlfiles"
            newdlprefiles=
            for lib in $dlprefiles; do
              name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
              eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
              if test -z "$libdir"; then
                $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
                exit $EXIT_FAILURE
              fi
              newdlprefiles="$newdlprefiles $libdir/$name"
            done
            dlprefiles="$newdlprefiles"
          else
            newdlfiles=
            for lib in $dlfiles; do
              case $lib in
                [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
                *) abs=`pwd`"/$lib" ;;
              esac
              newdlfiles="$newdlfiles $abs"
            done
            dlfiles="$newdlfiles"
            newdlprefiles=
            for lib in $dlprefiles; do
              case $lib in
                [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
                *) abs=`pwd`"/$lib" ;;
              esac
              newdlprefiles="$newdlprefiles $abs"
            done
            dlprefiles="$newdlprefiles"
          fi
          $rm $output
          # place dlname in correct position for cygwin
          tdlname=$dlname
          case $host,$output,$installed,$module,$dlname in
            *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
          esac
          $echo > $output "\
# $outputname - a libtool library file
# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
 
# The name that we can dlopen(3).
dlname='$tdlname'
 
# Names of this library.
library_names='$library_names'
 
# The name of the static archive.
old_library='$old_library'
 
# Libraries that this one depends upon.
dependency_libs='$dependency_libs'
 
# Version information for $libname.
current=$current
age=$age
revision=$revision
 
# Is this an already installed library?
installed=$installed
 
# Should we warn about portability when linking against -modules?
shouldnotlink=$module
 
# Files to dlopen/dlpreopen
dlopen='$dlfiles'
dlpreopen='$dlprefiles'
 
# Directory that this library needs to be installed in:
libdir='$install_libdir'"
          if test "$installed" = no && test "$need_relink" = yes; then
            $echo >> $output "\
relink_command=\"$relink_command\""
          fi
        done
      fi
 
      # Do a symbolic link so that the libtool archive can be found in
      # LD_LIBRARY_PATH before the program is installed.
      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
      ;;
    esac
    exit $EXIT_SUCCESS
    ;;
 
  # libtool install mode
  install)
    modename="$modename: install"
 
    # There may be an optional sh(1) argument at the beginning of
    # install_prog (especially on Windows NT).
    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
       # Allow the use of GNU shtool's install command.
       $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
      # Aesthetically quote it.
      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
      case $arg in
      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
        arg="\"$arg\""
        ;;
      esac
      install_prog="$arg "
      arg="$1"
      shift
    else
      install_prog=
      arg="$nonopt"
    fi
 
    # The real first argument should be the name of the installation program.
    # Aesthetically quote it.
    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
    case $arg in
    *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
      arg="\"$arg\""
      ;;
    esac
    install_prog="$install_prog$arg"
 
    # We need to accept at least all the BSD install flags.
    dest=
    files=
    opts=
    prev=
    install_type=
    isdir=no
    stripme=
    for arg
    do
      if test -n "$dest"; then
        files="$files $dest"
        dest="$arg"
        continue
      fi
 
      case $arg in
      -d) isdir=yes ;;
      -f) prev="-f" ;;
      -g) prev="-g" ;;
      -m) prev="-m" ;;
      -o) prev="-o" ;;
      -s)
        stripme=" -s"
        continue
        ;;
      -*) ;;
 
      *)
        # If the previous option needed an argument, then skip it.
        if test -n "$prev"; then
          prev=
        else
          dest="$arg"
          continue
        fi
        ;;
      esac
 
      # Aesthetically quote the argument.
      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
      case $arg in
      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
        arg="\"$arg\""
        ;;
      esac
      install_prog="$install_prog $arg"
    done
 
    if test -z "$install_prog"; then
      $echo "$modename: you must specify an install program" 1>&2
      $echo "$help" 1>&2
      exit $EXIT_FAILURE
    fi
 
    if test -n "$prev"; then
      $echo "$modename: the \`$prev' option requires an argument" 1>&2
      $echo "$help" 1>&2
      exit $EXIT_FAILURE
    fi
 
    if test -z "$files"; then
      if test -z "$dest"; then
        $echo "$modename: no file or destination specified" 1>&2
      else
        $echo "$modename: you must specify a destination" 1>&2
      fi
      $echo "$help" 1>&2
      exit $EXIT_FAILURE
    fi
 
    # Strip any trailing slash from the destination.
    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
 
    # Check to see that the destination is a directory.
    test -d "$dest" && isdir=yes
    if test "$isdir" = yes; then
      destdir="$dest"
      destname=
    else
      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
      test "X$destdir" = "X$dest" && destdir=.
      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
 
      # Not a directory, so check to see that there is only one file specified.
      set dummy $files
      if test "$#" -gt 2; then
        $echo "$modename: \`$dest' is not a directory" 1>&2
        $echo "$help" 1>&2
        exit $EXIT_FAILURE
      fi
    fi
    case $destdir in
    [\\/]* | [A-Za-z]:[\\/]*) ;;
    *)
      for file in $files; do
        case $file in
        *.lo) ;;
        *)
          $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
          $echo "$help" 1>&2
          exit $EXIT_FAILURE
          ;;
        esac
      done
      ;;
    esac
 
    # This variable tells wrapper scripts just to set variables rather
    # than running their programs.
    libtool_install_magic="$magic"
 
    staticlibs=
    future_libdirs=
    current_libdirs=
    for file in $files; do
 
      # Do each installation.
      case $file in
      *.$libext)
        # Do the static libraries later.
        staticlibs="$staticlibs $file"
        ;;
 
      *.la)
        # Check to see that this really is a libtool archive.
        if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
        else
          $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
          $echo "$help" 1>&2
          exit $EXIT_FAILURE
        fi
 
        library_names=
        old_library=
        relink_command=
        # If there is no directory component, then add one.
        case $file in
        */* | *\\*) . $file ;;
        *) . ./$file ;;
        esac
 
        # Add the libdir to current_libdirs if it is the destination.
        if test "X$destdir" = "X$libdir"; then
          case "$current_libdirs " in
          *" $libdir "*) ;;
          *) current_libdirs="$current_libdirs $libdir" ;;
          esac
        else
          # Note the libdir as a future libdir.
          case "$future_libdirs " in
          *" $libdir "*) ;;
          *) future_libdirs="$future_libdirs $libdir" ;;
          esac
        fi
 
        dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
        test "X$dir" = "X$file/" && dir=
        dir="$dir$objdir"
 
        if test -n "$relink_command"; then
          # Determine the prefix the user has applied to our future dir.
          inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
 
          # Don't allow the user to place us outside of our expected
          # location b/c this prevents finding dependent libraries that
          # are installed to the same prefix.
          # At present, this check doesn't affect windows .dll's that
          # are installed into $libdir/../bin (currently, that works fine)
          # but it's something to keep an eye on.
          if test "$inst_prefix_dir" = "$destdir"; then
            $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
            exit $EXIT_FAILURE
          fi
 
          if test -n "$inst_prefix_dir"; then
            # Stick the inst_prefix_dir data into the link command.
            relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
          else
            relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
          fi
 
          $echo "$modename: warning: relinking \`$file'" 1>&2
          $show "$relink_command"
          if $run eval "$relink_command"; then :
          else
            $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
            exit $EXIT_FAILURE
          fi
        fi
 
        # See the names of the shared library.
        set dummy $library_names
        if test -n "$2"; then
          realname="$2"
          shift
          shift
 
          srcname="$realname"
          test -n "$relink_command" && srcname="$realname"T
 
          # Install the shared library and build the symlinks.
          $show "$install_prog $dir/$srcname $destdir/$realname"
          $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
          if test -n "$stripme" && test -n "$striplib"; then
            $show "$striplib $destdir/$realname"
            $run eval "$striplib $destdir/$realname" || exit $?
          fi
 
          if test "$#" -gt 0; then
            # Delete the old symlinks, and create new ones.
            for linkname
            do
              if test "$linkname" != "$realname"; then
                $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
                $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
              fi
            done
          fi
 
          # Do each command in the postinstall commands.
          lib="$destdir/$realname"
          cmds=$postinstall_cmds
          save_ifs="$IFS"; IFS='~'
          for cmd in $cmds; do
            IFS="$save_ifs"
            eval cmd=\"$cmd\"
            $show "$cmd"
            $run eval "$cmd" || exit $?
          done
          IFS="$save_ifs"
        fi
 
        # Install the pseudo-library for information purposes.
        name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
        instname="$dir/$name"i
        $show "$install_prog $instname $destdir/$name"
        $run eval "$install_prog $instname $destdir/$name" || exit $?
 
        # Maybe install the static library, too.
        test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
        ;;
 
      *.lo)
        # Install (i.e. copy) a libtool object.
 
        # Figure out destination file name, if it wasn't already specified.
        if test -n "$destname"; then
          destfile="$destdir/$destname"
        else
          destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
          destfile="$destdir/$destfile"
        fi
 
        # Deduce the name of the destination old-style object file.
        case $destfile in
        *.lo)
          staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
          ;;
        *.$objext)
          staticdest="$destfile"
          destfile=
          ;;
        *)
          $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
          $echo "$help" 1>&2
          exit $EXIT_FAILURE
          ;;
        esac
 
        # Install the libtool object if requested.
        if test -n "$destfile"; then
          $show "$install_prog $file $destfile"
          $run eval "$install_prog $file $destfile" || exit $?
        fi
 
        # Install the old object if enabled.
        if test "$build_old_libs" = yes; then
          # Deduce the name of the old-style object file.
          staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
 
          $show "$install_prog $staticobj $staticdest"
          $run eval "$install_prog \$staticobj \$staticdest" || exit $?
        fi
        exit $EXIT_SUCCESS
        ;;
 
      *)
        # Figure out destination file name, if it wasn't already specified.
        if test -n "$destname"; then
          destfile="$destdir/$destname"
        else
          destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
          destfile="$destdir/$destfile"
        fi
 
        # If the file is missing, and there is a .exe on the end, strip it
        # because it is most likely a libtool script we actually want to
        # install
        stripped_ext=""
        case $file in
          *.exe)
            if test ! -f "$file"; then
              file=`$echo $file|${SED} 's,.exe$,,'`
              stripped_ext=".exe"
            fi
            ;;
        esac
 
        # Do a test to see if this is really a libtool program.
        case $host in
        *cygwin*|*mingw*)
            wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
            ;;
        *)
            wrapper=$file
            ;;
        esac
        if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
          notinst_deplibs=
          relink_command=
 
          # To insure that "foo" is sourced, and not "foo.exe",
          # finese the cygwin/MSYS system by explicitly sourcing "foo."
          # which disallows the automatic-append-.exe behavior.
          case $build in
          *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
          *) wrapperdot=${wrapper} ;;
          esac
          # If there is no directory component, then add one.
          case $file in
          */* | *\\*) . ${wrapperdot} ;;
          *) . ./${wrapperdot} ;;
          esac
 
          # Check the variables that should have been set.
          if test -z "$notinst_deplibs"; then
            $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
            exit $EXIT_FAILURE
          fi
 
          finalize=yes
          for lib in $notinst_deplibs; do
            # Check to see that each library is installed.
            libdir=
            if test -f "$lib"; then
              # If there is no directory component, then add one.
              case $lib in
              */* | *\\*) . $lib ;;
              *) . ./$lib ;;
              esac
            fi
            libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
            if test -n "$libdir" && test ! -f "$libfile"; then
              $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
              finalize=no
            fi
          done
 
          relink_command=
          # To insure that "foo" is sourced, and not "foo.exe",
          # finese the cygwin/MSYS system by explicitly sourcing "foo."
          # which disallows the automatic-append-.exe behavior.
          case $build in
          *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
          *) wrapperdot=${wrapper} ;;
          esac
          # If there is no directory component, then add one.
          case $file in
          */* | *\\*) . ${wrapperdot} ;;
          *) . ./${wrapperdot} ;;
          esac
 
          outputname=
          if test "$fast_install" = no && test -n "$relink_command"; then
            if test "$finalize" = yes && test -z "$run"; then
              tmpdir="/tmp"
              test -n "$TMPDIR" && tmpdir="$TMPDIR"
              tmpdir="$tmpdir/libtool-$$"
              save_umask=`umask`
              umask 0077
              if $mkdir "$tmpdir"; then
                umask $save_umask
              else
                umask $save_umask
                $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
                continue
              fi
              file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
              outputname="$tmpdir/$file"
              # Replace the output file specification.
              relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
 
              $show "$relink_command"
              if $run eval "$relink_command"; then :
              else
                $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
                ${rm}r "$tmpdir"
                continue
              fi
              file="$outputname"
            else
              $echo "$modename: warning: cannot relink \`$file'" 1>&2
            fi
          else
            # Install the binary that we compiled earlier.
            file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
          fi
        fi
 
        # remove .exe since cygwin /usr/bin/install will append another
        # one anyways
        case $install_prog,$host in
        */usr/bin/install*,*cygwin*)
          case $file:$destfile in
          *.exe:*.exe)
            # this is ok
            ;;
          *.exe:*)
            destfile=$destfile.exe
            ;;
          *:*.exe)
            destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
            ;;
          esac
          ;;
        esac
        $show "$install_prog$stripme $file $destfile"
        $run eval "$install_prog\$stripme \$file \$destfile" || exit $?
        test -n "$outputname" && ${rm}r "$tmpdir"
        ;;
      esac
    done
 
    for file in $staticlibs; do
      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
 
      # Set up the ranlib parameters.
      oldlib="$destdir/$name"
 
      $show "$install_prog $file $oldlib"
      $run eval "$install_prog \$file \$oldlib" || exit $?
 
      if test -n "$stripme" && test -n "$old_striplib"; then
        $show "$old_striplib $oldlib"
        $run eval "$old_striplib $oldlib" || exit $?
      fi
 
      # Do each command in the postinstall commands.
      cmds=$old_postinstall_cmds
      save_ifs="$IFS"; IFS='~'
      for cmd in $cmds; do
        IFS="$save_ifs"
        eval cmd=\"$cmd\"
        $show "$cmd"
        $run eval "$cmd" || exit $?
      done
      IFS="$save_ifs"
    done
 
    if test -n "$future_libdirs"; then
      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
    fi
 
    if test -n "$current_libdirs"; then
      # Maybe just do a dry run.
      test -n "$run" && current_libdirs=" -n$current_libdirs"
      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
    else
      exit $EXIT_SUCCESS
    fi
    ;;
 
  # libtool finish mode
  finish)
    modename="$modename: finish"
    libdirs="$nonopt"
    admincmds=
 
    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
      for dir
      do
        libdirs="$libdirs $dir"
      done
 
      for libdir in $libdirs; do
        if test -n "$finish_cmds"; then
          # Do each command in the finish commands.
          cmds=$finish_cmds
          save_ifs="$IFS"; IFS='~'
          for cmd in $cmds; do
            IFS="$save_ifs"
            eval cmd=\"$cmd\"
            $show "$cmd"
            $run eval "$cmd" || admincmds="$admincmds
       $cmd"
          done
          IFS="$save_ifs"
        fi
        if test -n "$finish_eval"; then
          # Do the single finish_eval.
          eval cmds=\"$finish_eval\"
          $run eval "$cmds" || admincmds="$admincmds
       $cmds"
        fi
      done
    fi
 
    # Exit here if they wanted silent mode.
    test "$show" = : && exit $EXIT_SUCCESS
 
    $echo "----------------------------------------------------------------------"
    $echo "Libraries have been installed in:"
    for libdir in $libdirs; do
      $echo "   $libdir"
    done
    $echo
    $echo "If you ever happen to want to link against installed libraries"
    $echo "in a given directory, LIBDIR, you must either use libtool, and"
    $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
    $echo "flag during linking and do at least one of the following:"
    if test -n "$shlibpath_var"; then
      $echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
      $echo "     during execution"
    fi
    if test -n "$runpath_var"; then
      $echo "   - add LIBDIR to the \`$runpath_var' environment variable"
      $echo "     during linking"
    fi
    if test -n "$hardcode_libdir_flag_spec"; then
      libdir=LIBDIR
      eval flag=\"$hardcode_libdir_flag_spec\"
 
      $echo "   - use the \`$flag' linker flag"
    fi
    if test -n "$admincmds"; then
      $echo "   - have your system administrator run these commands:$admincmds"
    fi
    if test -f /etc/ld.so.conf; then
      $echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
    fi
    $echo
    $echo "See any operating system documentation about shared libraries for"
    $echo "more information, such as the ld(1) and ld.so(8) manual pages."
    $echo "----------------------------------------------------------------------"
    exit $EXIT_SUCCESS
    ;;
 
  # libtool execute mode
  execute)
    modename="$modename: execute"
 
    # The first argument is the command name.
    cmd="$nonopt"
    if test -z "$cmd"; then
      $echo "$modename: you must specify a COMMAND" 1>&2
      $echo "$help"
      exit $EXIT_FAILURE
    fi
 
    # Handle -dlopen flags immediately.
    for file in $execute_dlfiles; do
      if test ! -f "$file"; then
        $echo "$modename: \`$file' is not a file" 1>&2
        $echo "$help" 1>&2
        exit $EXIT_FAILURE
      fi
 
      dir=
      case $file in
      *.la)
        # Check to see that this really is a libtool archive.
        if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
        else
          $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
          $echo "$help" 1>&2
          exit $EXIT_FAILURE
        fi
 
        # Read the libtool library.
        dlname=
        library_names=
 
        # If there is no directory component, then add one.
        case $file in
        */* | *\\*) . $file ;;
        *) . ./$file ;;
        esac
 
        # Skip this library if it cannot be dlopened.
        if test -z "$dlname"; then
          # Warn if it was a shared library.
          test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
          continue
        fi
 
        dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
        test "X$dir" = "X$file" && dir=.
 
        if test -f "$dir/$objdir/$dlname"; then
          dir="$dir/$objdir"
        else
          $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
          exit $EXIT_FAILURE
        fi
        ;;
 
      *.lo)
        # Just add the directory containing the .lo file.
        dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
        test "X$dir" = "X$file" && dir=.
        ;;
 
      *)
        $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
        continue
        ;;
      esac
 
      # Get the absolute pathname.
      absdir=`cd "$dir" && pwd`
      test -n "$absdir" && dir="$absdir"
 
      # Now add the directory to shlibpath_var.
      if eval "test -z \"\$$shlibpath_var\""; then
        eval "$shlibpath_var=\"\$dir\""
      else
        eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
      fi
    done
 
    # This variable tells wrapper scripts just to set shlibpath_var
    # rather than running their programs.
    libtool_execute_magic="$magic"
 
    # Check if any of the arguments is a wrapper script.
    args=
    for file
    do
      case $file in
      -*) ;;
      *)
        # Do a test to see if this is really a libtool program.
        if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
          # If there is no directory component, then add one.
          case $file in
          */* | *\\*) . $file ;;
          *) . ./$file ;;
          esac
 
          # Transform arg to wrapped name.
          file="$progdir/$program"
        fi
        ;;
      esac
      # Quote arguments (to preserve shell metacharacters).
      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
      args="$args \"$file\""
    done
 
    if test -z "$run"; then
      if test -n "$shlibpath_var"; then
        # Export the shlibpath_var.
        eval "export $shlibpath_var"
      fi
 
      # Restore saved environment variables
      if test "${save_LC_ALL+set}" = set; then
        LC_ALL="$save_LC_ALL"; export LC_ALL
      fi
      if test "${save_LANG+set}" = set; then
        LANG="$save_LANG"; export LANG
      fi
 
      # Now prepare to actually exec the command.
      exec_cmd="\$cmd$args"
    else
      # Display what would be done.
      if test -n "$shlibpath_var"; then
        eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
        $echo "export $shlibpath_var"
      fi
      $echo "$cmd$args"
      exit $EXIT_SUCCESS
    fi
    ;;
 
  # libtool clean and uninstall mode
  clean | uninstall)
    modename="$modename: $mode"
    rm="$nonopt"
    files=
    rmforce=
    exit_status=0
 
    # This variable tells wrapper scripts just to set variables rather
    # than running their programs.
    libtool_install_magic="$magic"
 
    for arg
    do
      case $arg in
      -f) rm="$rm $arg"; rmforce=yes ;;
      -*) rm="$rm $arg" ;;
      *) files="$files $arg" ;;
      esac
    done
 
    if test -z "$rm"; then
      $echo "$modename: you must specify an RM program" 1>&2
      $echo "$help" 1>&2
      exit $EXIT_FAILURE
    fi
 
    rmdirs=
 
    origobjdir="$objdir"
    for file in $files; do
      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
      if test "X$dir" = "X$file"; then
        dir=.
        objdir="$origobjdir"
      else
        objdir="$dir/$origobjdir"
      fi
      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
      test "$mode" = uninstall && objdir="$dir"
 
      # Remember objdir for removal later, being careful to avoid duplicates
      if test "$mode" = clean; then
        case " $rmdirs " in
          *" $objdir "*) ;;
          *) rmdirs="$rmdirs $objdir" ;;
        esac
      fi
 
      # Don't error if the file doesn't exist and rm -f was used.
      if (test -L "$file") >/dev/null 2>&1 \
        || (test -h "$file") >/dev/null 2>&1 \
        || test -f "$file"; then
        :
      elif test -d "$file"; then
        exit_status=1
        continue
      elif test "$rmforce" = yes; then
        continue
      fi
 
      rmfiles="$file"
 
      case $name in
      *.la)
        # Possibly a libtool archive, so verify it.
        if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
          . $dir/$name
 
          # Delete the libtool libraries and symlinks.
          for n in $library_names; do
            rmfiles="$rmfiles $objdir/$n"
          done
          test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
          test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
 
          if test "$mode" = uninstall; then
            if test -n "$library_names"; then
              # Do each command in the postuninstall commands.
              cmds=$postuninstall_cmds
              save_ifs="$IFS"; IFS='~'
              for cmd in $cmds; do
                IFS="$save_ifs"
                eval cmd=\"$cmd\"
                $show "$cmd"
                $run eval "$cmd"
                if test "$?" -ne 0 && test "$rmforce" != yes; then
                  exit_status=1
                fi
              done
              IFS="$save_ifs"
            fi
 
            if test -n "$old_library"; then
              # Do each command in the old_postuninstall commands.
              cmds=$old_postuninstall_cmds
              save_ifs="$IFS"; IFS='~'
              for cmd in $cmds; do
                IFS="$save_ifs"
                eval cmd=\"$cmd\"
                $show "$cmd"
                $run eval "$cmd"
                if test "$?" -ne 0 && test "$rmforce" != yes; then
                  exit_status=1
                fi
              done
              IFS="$save_ifs"
            fi
            # FIXME: should reinstall the best remaining shared library.
          fi
        fi
        ;;
 
      *.lo)
        # Possibly a libtool object, so verify it.
        if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
 
          # Read the .lo file
          . $dir/$name
 
          # Add PIC object to the list of files to remove.
          if test -n "$pic_object" \
             && test "$pic_object" != none; then
            rmfiles="$rmfiles $dir/$pic_object"
          fi
 
          # Add non-PIC object to the list of files to remove.
          if test -n "$non_pic_object" \
             && test "$non_pic_object" != none; then
            rmfiles="$rmfiles $dir/$non_pic_object"
          fi
        fi
        ;;
 
      *)
        if test "$mode" = clean ; then
          noexename=$name
          case $file in
          *.exe)
            file=`$echo $file|${SED} 's,.exe$,,'`
            noexename=`$echo $name|${SED} 's,.exe$,,'`
            # $file with .exe has already been added to rmfiles,
            # add $file without .exe
            rmfiles="$rmfiles $file"
            ;;
          esac
          # Do a test to see if this is a libtool program.
          if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
            relink_command=
            . $dir/$noexename
 
            # note $name still contains .exe if it was in $file originally
            # as does the version of $file that was added into $rmfiles
            rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
            if test "$fast_install" = yes && test -n "$relink_command"; then
              rmfiles="$rmfiles $objdir/lt-$name"
            fi
            if test "X$noexename" != "X$name" ; then
              rmfiles="$rmfiles $objdir/lt-${noexename}.c"
            fi
          fi
        fi
        ;;
      esac
      $show "$rm $rmfiles"
      $run $rm $rmfiles || exit_status=1
    done
    objdir="$origobjdir"
 
    # Try to remove the ${objdir}s in the directories where we deleted files
    for dir in $rmdirs; do
      if test -d "$dir"; then
        $show "rmdir $dir"
        $run rmdir $dir >/dev/null 2>&1
      fi
    done
 
    exit $exit_status
    ;;
 
  "")
    $echo "$modename: you must specify a MODE" 1>&2
    $echo "$generic_help" 1>&2
    exit $EXIT_FAILURE
    ;;
  esac
 
  if test -z "$exec_cmd"; then
    $echo "$modename: invalid operation mode \`$mode'" 1>&2
    $echo "$generic_help" 1>&2
    exit $EXIT_FAILURE
  fi
fi # test -z "$show_help"
 
if test -n "$exec_cmd"; then
  eval exec $exec_cmd
  exit $EXIT_FAILURE
fi
 
# We need to display help for each of the modes.
case $mode in
"") $echo \
"Usage: $modename [OPTION]... [MODE-ARG]...
 
Provide generalized library-building support services.
 
    --config          show all configuration variables
    --debug           enable verbose shell tracing
-n, --dry-run         display commands without modifying any files
    --features        display basic configuration information and exit
    --finish          same as \`--mode=finish'
    --help            display this help message and exit
    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
    --quiet           same as \`--silent'
    --silent          don't print informational messages
    --tag=TAG         use configuration variables from tag TAG
    --version         print version information
 
MODE must be one of the following:
 
      clean           remove files from the build directory
      compile         compile a source file into a libtool object
      execute         automatically set library path, then run a program
      finish          complete the installation of libtool libraries
      install         install libraries or executables
      link            create a library or an executable
      uninstall       remove libraries from an installed directory
 
MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
a more detailed description of MODE.
 
Report bugs to <bug-libtool@gnu.org>."
  exit $EXIT_SUCCESS
  ;;
 
clean)
  $echo \
"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
 
Remove files from the build directory.
 
RM is the name of the program to use to delete files associated with each FILE
(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
to RM.
 
If FILE is a libtool library, object or program, all the files associated
with it are deleted. Otherwise, only FILE itself is deleted using RM."
  ;;
 
compile)
  $echo \
"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
 
Compile a source file into a libtool library object.
 
This mode accepts the following additional options:
 
  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
  -prefer-pic       try to building PIC objects only
  -prefer-non-pic   try to building non-PIC objects only
  -static           always build a \`.o' file suitable for static linking
 
COMPILE-COMMAND is a command to be used in creating a \`standard' object file
from the given SOURCEFILE.
 
The output file name is determined by removing the directory component from
SOURCEFILE, then substituting the C source code suffix \`.c' with the
library object suffix, \`.lo'."
  ;;
 
execute)
  $echo \
"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
 
Automatically set library path, then run a program.
 
This mode accepts the following additional options:
 
  -dlopen FILE      add the directory containing FILE to the library path
 
This mode sets the library path environment variable according to \`-dlopen'
flags.
 
If any of the ARGS are libtool executable wrappers, then they are translated
into their corresponding uninstalled binary, and any of their required library
directories are added to the library path.
 
Then, COMMAND is executed, with ARGS as arguments."
  ;;
 
finish)
  $echo \
"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
 
Complete the installation of libtool libraries.
 
Each LIBDIR is a directory that contains libtool libraries.
 
The commands that this mode executes may require superuser privileges.  Use
the \`--dry-run' option if you just want to see what would be executed."
  ;;
 
install)
  $echo \
"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
 
Install executables or libraries.
 
INSTALL-COMMAND is the installation command.  The first component should be
either the \`install' or \`cp' program.
 
The rest of the components are interpreted as arguments to that command (only
BSD-compatible install options are recognized)."
  ;;
 
link)
  $echo \
"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
 
Link object files or libraries together to form another library, or to
create an executable program.
 
LINK-COMMAND is a command using the C compiler that you would use to create
a program from several object files.
 
The following components of LINK-COMMAND are treated specially:
 
  -all-static       do not do any dynamic linking at all
  -avoid-version    do not add a version suffix if possible
  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
  -export-symbols SYMFILE
                    try to export only the symbols listed in SYMFILE
  -export-symbols-regex REGEX
                    try to export only the symbols matching REGEX
  -LLIBDIR          search LIBDIR for required installed libraries
  -lNAME            OUTPUT-FILE requires the installed library libNAME
  -module           build a library that can dlopened
  -no-fast-install  disable the fast-install mode
  -no-install       link a not-installable executable
  -no-undefined     declare that a library does not refer to external symbols
  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
  -objectlist FILE  Use a list of object files found in FILE to specify objects
  -precious-files-regex REGEX
                    don't remove output files matching REGEX
  -release RELEASE  specify package release information
  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
  -static           do not do any dynamic linking of libtool libraries
  -version-info CURRENT[:REVISION[:AGE]]
                    specify library version info [each variable defaults to 0]
 
All other options (arguments beginning with \`-') are ignored.
 
Every other argument is treated as a filename.  Files ending in \`.la' are
treated as uninstalled libtool libraries, other files are standard or library
object files.
 
If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
only library objects (\`.lo' files) may be specified, and \`-rpath' is
required, except when creating a convenience library.
 
If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
using \`ar' and \`ranlib', or on Windows using \`lib'.
 
If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
is created, otherwise an executable program is created."
  ;;
 
uninstall)
  $echo \
"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
 
Remove libraries from an installation directory.
 
RM is the name of the program to use to delete files associated with each FILE
(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
to RM.
 
If FILE is a libtool library, all the files associated with it are deleted.
Otherwise, only FILE itself is deleted using RM."
  ;;
 
*)
  $echo "$modename: invalid operation mode \`$mode'" 1>&2
  $echo "$help" 1>&2
  exit $EXIT_FAILURE
  ;;
esac
 
$echo
$echo "Try \`$modename --help' for more information about other modes."
 
exit $?
 
# The TAGs below are defined such that we never get into a situation
# in which we disable both kinds of libraries.  Given conflicting
# choices, we go for a static library, that is the most portable,
# since we can't tell whether shared libraries were disabled because
# the user asked for that or because the platform doesn't support
# them.  This is particularly important on AIX, because we don't
# support having both static and shared libraries enabled at the same
# time on that platform, so we default to a shared-only configuration.
# If a disable-shared tag is given, we'll fallback to a static-only
# configuration.  But we'll never go from static-only to shared-only.
 
# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
build_libtool_libs=no
build_old_libs=yes
# ### END LIBTOOL TAG CONFIG: disable-shared
 
# ### BEGIN LIBTOOL TAG CONFIG: disable-static
build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac`
# ### END LIBTOOL TAG CONFIG: disable-static
 
# Local Variables:
# mode:shell-script
# sh-indentation:2
# End:
Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [libjava/] [libltdl/] [ltmain.sh] - Blame information for rev 851

Line No.	Rev	Author	Line
1	760	jeremybenn	`# ltmain.sh - Provide generalized library-building support services.`
2			`# NOTE: Changing this file will not affect anything until you rerun configure.`
3			`#`
4			`# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005`
5			`# Free Software Foundation, Inc.`
6			`# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996`
7			`#`
8			`# This program is free software; you can redistribute it and/or modify`
9			`# it under the terms of the GNU General Public License as published by`
10			`# the Free Software Foundation; either version 2 of the License, or`
11			`# (at your option) any later version.`
12			`#`
13			`# This program is distributed in the hope that it will be useful, but`
14			`# WITHOUT ANY WARRANTY; without even the implied warranty of`
15			`# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU`
16			`# General Public License for more details.`
17			`#`
18			`# You should have received a copy of the GNU General Public License`
19			`# along with this program; if not, write to the Free Software`
20			`# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.`
21			`#`
22			`# As a special exception to the GNU General Public License, if you`
23			`# distribute this file as part of a program that contains a`
24			`# configuration script generated by Autoconf, you may include it under`
25			`# the same distribution terms that you use for the rest of that program.`
26
27			`basename="s,^.*/,,g"`
28
29			`# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh`
30			`# is ksh but when the shell is invoked as "sh" and the current value of`
31			`# the _XPG environment variable is not equal to 1 (one), the special`
32			`# positional parameter $0, within a function call, is the name of the`
33			`# function.`
34			`progpath="$0"`
35
36			`# The name of this program:`
37			progname=`echo "$progpath" \| $SED $basename`
38			`modename="$progname"`
39
40			`# Global variables:`