Subversion Repositories openrisc

/* BFD back-end for Renesas H8/300 COFF binaries.

   Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,

   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008

   Free Software Foundation, Inc.

   Written by Steve Chamberlain, <sac@cygnus.com>.

   This file is part of BFD, the Binary File Descriptor library.

   This program is free software; you can redistribute it and/or modify

   it under the terms of the GNU General Public License as published by

   the Free Software Foundation; either version 3 of the License, or

   (at your option) any later version.

   This program is distributed in the hope that it will be useful,

   but WITHOUT ANY WARRANTY; without even the implied warranty of

   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License

   along with this program; if not, write to the Free Software

   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,

   MA 02110-1301, USA.  */

#include "sysdep.h"

#include "bfd.h"

#include "libbfd.h"

#include "bfdlink.h"

#include "genlink.h"

#include "coff/h8300.h"

#include "coff/internal.h"

#include "libcoff.h"

#include "libiberty.h"

#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (1)

/* We derive a hash table from the basic BFD hash table to

   hold entries in the function vector.  Aside from the

   info stored by the basic hash table, we need the offset

   of a particular entry within the hash table as well as

   the offset where we'll add the next entry.  */

struct funcvec_hash_entry

  {

    /* The basic hash table entry.  */

    struct bfd_hash_entry root;

    /* The offset within the vectors section where

       this entry lives.  */

    bfd_vma offset;

  };

struct funcvec_hash_table

  {

    /* The basic hash table.  */

    struct bfd_hash_table root;

    bfd *abfd;

    /* Offset at which we'll add the next entry.  */

    unsigned int offset;

  };

static struct bfd_hash_entry *

funcvec_hash_newfunc

  (struct bfd_hash_entry *, struct bfd_hash_table *, const char *);

static bfd_reloc_status_type special

  (bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **);

static int select_reloc

  (reloc_howto_type *);

static void rtype2howto

  (arelent *, struct internal_reloc *);

static void reloc_processing

  (arelent *, struct internal_reloc *, asymbol **, bfd *, asection *);

static bfd_boolean h8300_symbol_address_p

  (bfd *, asection *, bfd_vma);

static int h8300_reloc16_estimate

  (bfd *, asection *, arelent *, unsigned int,

   struct bfd_link_info *);

static void h8300_reloc16_extra_cases

  (bfd *, struct bfd_link_info *, struct bfd_link_order *, arelent *,

   bfd_byte *, unsigned int *, unsigned int *);

static bfd_boolean h8300_bfd_link_add_symbols

  (bfd *, struct bfd_link_info *);

/* To lookup a value in the function vector hash table.  */

#define funcvec_hash_lookup(table, string, create, copy) \

  ((struct funcvec_hash_entry *) \

   bfd_hash_lookup (&(table)->root, (string), (create), (copy)))

/* The derived h8300 COFF linker table.  Note it's derived from

   the generic linker hash table, not the COFF backend linker hash

   table!  We use this to attach additional data structures we

   need while linking on the h8300.  */

struct h8300_coff_link_hash_table {

  /* The main hash table.  */

  struct generic_link_hash_table root;

  /* Section for the vectors table.  This gets attached to a

     random input bfd, we keep it here for easy access.  */

  asection *vectors_sec;

  /* Hash table of the functions we need to enter into the function

     vector.  */

  struct funcvec_hash_table *funcvec_hash_table;

};

static struct bfd_link_hash_table *h8300_coff_link_hash_table_create (bfd *);

/* Get the H8/300 COFF linker hash table from a link_info structure.  */

#define h8300_coff_hash_table(p) \

  ((struct h8300_coff_link_hash_table *) ((coff_hash_table (p))))

/* Initialize fields within a funcvec hash table entry.  Called whenever

   a new entry is added to the funcvec hash table.  */

static struct bfd_hash_entry *

funcvec_hash_newfunc (struct bfd_hash_entry *entry,

                      struct bfd_hash_table *gen_table,

                      const char *string)

{

  struct funcvec_hash_entry *ret;

  struct funcvec_hash_table *table;

  ret = (struct funcvec_hash_entry *) entry;

  table = (struct funcvec_hash_table *) gen_table;

  /* Allocate the structure if it has not already been allocated by a

     subclass.  */

  if (ret == NULL)

    ret = ((struct funcvec_hash_entry *)

           bfd_hash_allocate (gen_table,

                              sizeof (struct funcvec_hash_entry)));

  if (ret == NULL)

    return NULL;

  /* Call the allocation method of the superclass.  */

  ret = ((struct funcvec_hash_entry *)

         bfd_hash_newfunc ((struct bfd_hash_entry *) ret, gen_table, string));

  if (ret == NULL)

    return NULL;

  /* Note where this entry will reside in the function vector table.  */

  ret->offset = table->offset;

  /* Bump the offset at which we store entries in the function

     vector.  We'd like to bump up the size of the vectors section,

     but it's not easily available here.  */

 switch (bfd_get_mach (table->abfd))

   {

   case bfd_mach_h8300:

   case bfd_mach_h8300hn:

   case bfd_mach_h8300sn:

     table->offset += 2;

     break;

   case bfd_mach_h8300h:

   case bfd_mach_h8300s:

     table->offset += 4;

     break;

   default:

     return NULL;

   }

  /* Everything went OK.  */

  return (struct bfd_hash_entry *) ret;

}

/* Initialize the function vector hash table.  */

static bfd_boolean

funcvec_hash_table_init (struct funcvec_hash_table *table,

                         bfd *abfd,

                         struct bfd_hash_entry *(*newfunc)

                           (struct bfd_hash_entry *,

                            struct bfd_hash_table *,

                            const char *),

                         unsigned int entsize)

{

  /* Initialize our local fields, then call the generic initialization

     routine.  */

  table->offset = 0;

  table->abfd = abfd;

  return (bfd_hash_table_init (&table->root, newfunc, entsize));

}

/* Create the derived linker hash table.  We use a derived hash table

   basically to hold "static" information during an H8/300 coff link

   without using static variables.  */

static struct bfd_link_hash_table *

h8300_coff_link_hash_table_create (bfd *abfd)

{

  struct h8300_coff_link_hash_table *ret;

  bfd_size_type amt = sizeof (struct h8300_coff_link_hash_table);

  ret = (struct h8300_coff_link_hash_table *) bfd_malloc (amt);

  if (ret == NULL)

    return NULL;

  if (!_bfd_link_hash_table_init (&ret->root.root, abfd,

                                  _bfd_generic_link_hash_newfunc,

                                  sizeof (struct generic_link_hash_entry)))

    {

      free (ret);

      return NULL;

    }

  /* Initialize our data.  */

  ret->vectors_sec = NULL;

  ret->funcvec_hash_table = NULL;

  /* OK.  Everything's initialized, return the base pointer.  */

  return &ret->root.root;

}

/* Special handling for H8/300 relocs.

   We only come here for pcrel stuff and return normally if not an -r link.

   When doing -r, we can't do any arithmetic for the pcrel stuff, because

   the code in reloc.c assumes that we can manipulate the targets of

   the pcrel branches.  This isn't so, since the H8/300 can do relaxing,

   which means that the gap after the instruction may not be enough to

   contain the offset required for the branch, so we have to use only

   the addend until the final link.  */

static bfd_reloc_status_type

special (bfd *abfd ATTRIBUTE_UNUSED,

         arelent *reloc_entry ATTRIBUTE_UNUSED,

         asymbol *symbol ATTRIBUTE_UNUSED,

         PTR data ATTRIBUTE_UNUSED,

         asection *input_section ATTRIBUTE_UNUSED,

         bfd *output_bfd,

         char **error_message ATTRIBUTE_UNUSED)

{

  if (output_bfd == (bfd *) NULL)

    return bfd_reloc_continue;

  /* Adjust the reloc address to that in the output section.  */

  reloc_entry->address += input_section->output_offset;

  return bfd_reloc_ok;

}

static reloc_howto_type howto_table[] = {

  HOWTO (R_RELBYTE, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, special, "8", FALSE, 0x000000ff, 0x000000ff, FALSE),

  HOWTO (R_RELWORD, 0, 1, 16, FALSE, 0, complain_overflow_bitfield, special, "16", FALSE, 0x0000ffff, 0x0000ffff, FALSE),

  HOWTO (R_RELLONG, 0, 2, 32, FALSE, 0, complain_overflow_bitfield, special, "32", FALSE, 0xffffffff, 0xffffffff, FALSE),

  HOWTO (R_PCRBYTE, 0, 0, 8, TRUE, 0, complain_overflow_signed, special, "DISP8", FALSE, 0x000000ff, 0x000000ff, TRUE),

  HOWTO (R_PCRWORD, 0, 1, 16, TRUE, 0, complain_overflow_signed, special, "DISP16", FALSE, 0x0000ffff, 0x0000ffff, TRUE),

  HOWTO (R_PCRLONG, 0, 2, 32, TRUE, 0, complain_overflow_signed, special, "DISP32", FALSE, 0xffffffff, 0xffffffff, TRUE),

  HOWTO (R_MOV16B1, 0, 1, 16, FALSE, 0, complain_overflow_bitfield, special, "relaxable mov.b:16", FALSE, 0x0000ffff, 0x0000ffff, FALSE),

  HOWTO (R_MOV16B2, 0, 1, 8, FALSE, 0, complain_overflow_bitfield, special, "relaxed mov.b:16", FALSE, 0x000000ff, 0x000000ff, FALSE),

  HOWTO (R_JMP1, 0, 1, 16, FALSE, 0, complain_overflow_bitfield, special, "16/pcrel", FALSE, 0x0000ffff, 0x0000ffff, FALSE),

  HOWTO (R_JMP2, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, special, "pcrecl/16", FALSE, 0x000000ff, 0x000000ff, FALSE),

  HOWTO (R_JMPL1, 0, 2, 32, FALSE, 0, complain_overflow_bitfield, special, "24/pcrell", FALSE, 0x00ffffff, 0x00ffffff, FALSE),

  HOWTO (R_JMPL2, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, special, "pc8/24", FALSE, 0x000000ff, 0x000000ff, FALSE),

  HOWTO (R_MOV24B1, 0, 1, 32, FALSE, 0, complain_overflow_bitfield, special, "relaxable mov.b:24", FALSE, 0xffffffff, 0xffffffff, FALSE),

  HOWTO (R_MOV24B2, 0, 1, 8, FALSE, 0, complain_overflow_bitfield, special, "relaxed mov.b:24", FALSE, 0x0000ffff, 0x0000ffff, FALSE),

  /* An indirect reference to a function.  This causes the function's address

     to be added to the function vector in lo-mem and puts the address of

     the function vector's entry in the jsr instruction.  */

  HOWTO (R_MEM_INDIRECT, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, special, "8/indirect", FALSE, 0x000000ff, 0x000000ff, FALSE),

  /* Internal reloc for relaxing.  This is created when a 16-bit pc-relative

     branch is turned into an 8-bit pc-relative branch.  */

  HOWTO (R_PCRWORD_B, 0, 0, 8, TRUE, 0, complain_overflow_bitfield, special, "relaxed bCC:16", FALSE, 0x000000ff, 0x000000ff, FALSE),

  HOWTO (R_MOVL1, 0, 2, 32, FALSE, 0, complain_overflow_bitfield,special, "32/24 relaxable move", FALSE, 0xffffffff, 0xffffffff, FALSE),

  HOWTO (R_MOVL2, 0, 1, 16, FALSE, 0, complain_overflow_bitfield, special, "32/24 relaxed move", FALSE, 0x0000ffff, 0x0000ffff, FALSE),

  HOWTO (R_BCC_INV, 0, 0, 8, TRUE, 0, complain_overflow_signed, special, "DISP8 inverted", FALSE, 0x000000ff, 0x000000ff, TRUE),

  HOWTO (R_JMP_DEL, 0, 0, 8, TRUE, 0, complain_overflow_signed, special, "Deleted jump", FALSE, 0x000000ff, 0x000000ff, TRUE),

};

/* Turn a howto into a reloc number.  */

#define SELECT_RELOC(x,howto) \

  { x.r_type = select_reloc (howto); }

#define BADMAG(x) (H8300BADMAG (x) && H8300HBADMAG (x) && H8300SBADMAG (x) \

                                   && H8300HNBADMAG(x) && H8300SNBADMAG(x))

#define H8300 1                 /* Customize coffcode.h  */

#define __A_MAGIC_SET__

/* Code to swap in the reloc.  */

#define SWAP_IN_RELOC_OFFSET    H_GET_32

#define SWAP_OUT_RELOC_OFFSET   H_PUT_32

#define SWAP_OUT_RELOC_EXTRA(abfd, src, dst) \

  dst->r_stuff[0] = 'S'; \

  dst->r_stuff[1] = 'C';

static int

select_reloc (reloc_howto_type *howto)

{

  return howto->type;

}

/* Code to turn a r_type into a howto ptr, uses the above howto table.  */

static void

rtype2howto (arelent *internal, struct internal_reloc *dst)

{

  switch (dst->r_type)

    {

    case R_RELBYTE:

      internal->howto = howto_table + 0;

      break;

    case R_RELWORD:

      internal->howto = howto_table + 1;

      break;

    case R_RELLONG:

      internal->howto = howto_table + 2;

      break;

    case R_PCRBYTE:

      internal->howto = howto_table + 3;

      break;

    case R_PCRWORD:

      internal->howto = howto_table + 4;

      break;

    case R_PCRLONG:

      internal->howto = howto_table + 5;

      break;

    case R_MOV16B1:

      internal->howto = howto_table + 6;

      break;

    case R_MOV16B2:

      internal->howto = howto_table + 7;

      break;

    case R_JMP1:

      internal->howto = howto_table + 8;

      break;

    case R_JMP2:

      internal->howto = howto_table + 9;

      break;

    case R_JMPL1:

      internal->howto = howto_table + 10;

      break;

    case R_JMPL2:

      internal->howto = howto_table + 11;

      break;

    case R_MOV24B1:

      internal->howto = howto_table + 12;

      break;

    case R_MOV24B2:

      internal->howto = howto_table + 13;

      break;

    case R_MEM_INDIRECT:

      internal->howto = howto_table + 14;

      break;

    case R_PCRWORD_B:

      internal->howto = howto_table + 15;

      break;

    case R_MOVL1:

      internal->howto = howto_table + 16;

      break;

    case R_MOVL2:

      internal->howto = howto_table + 17;

      break;

    case R_BCC_INV:

      internal->howto = howto_table + 18;

      break;

    case R_JMP_DEL:

      internal->howto = howto_table + 19;

      break;

    default:

      abort ();

      break;

    }

}

#define RTYPE2HOWTO(internal, relocentry) rtype2howto (internal, relocentry)

/* Perform any necessary magic to the addend in a reloc entry.  */

#define CALC_ADDEND(abfd, symbol, ext_reloc, cache_ptr) \

 cache_ptr->addend = ext_reloc.r_offset;

#define RELOC_PROCESSING(relent,reloc,symbols,abfd,section) \

 reloc_processing (relent, reloc, symbols, abfd, section)

static void

reloc_processing (arelent *relent, struct internal_reloc *reloc,

                  asymbol **symbols, bfd *abfd, asection *section)

{

  relent->address = reloc->r_vaddr;

  rtype2howto (relent, reloc);

  if (((int) reloc->r_symndx) > 0)

    relent->sym_ptr_ptr = symbols + obj_convert (abfd)[reloc->r_symndx];

  else

    relent->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;

  relent->addend = reloc->r_offset;

  relent->address -= section->vma;

}

static bfd_boolean

h8300_symbol_address_p (bfd *abfd, asection *input_section, bfd_vma address)

{

  asymbol **s;

  s = _bfd_generic_link_get_symbols (abfd);

  BFD_ASSERT (s != (asymbol **) NULL);

  /* Search all the symbols for one in INPUT_SECTION with

     address ADDRESS.  */

  while (*s)

    {

      asymbol *p = *s;

      if (p->section == input_section

          && (input_section->output_section->vma

              + input_section->output_offset

              + p->value) == address)

        return TRUE;

      s++;

    }

  return FALSE;

}

/* If RELOC represents a relaxable instruction/reloc, change it into

   the relaxed reloc, notify the linker that symbol addresses

   have changed (bfd_perform_slip) and return how much the current

   section has shrunk by.

   FIXME: Much of this code has knowledge of the ordering of entries

   in the howto table.  This needs to be fixed.  */

static int

h8300_reloc16_estimate (bfd *abfd, asection *input_section, arelent *reloc,

                        unsigned int shrink, struct bfd_link_info *link_info)

{

  bfd_vma value;

  bfd_vma dot;

  bfd_vma gap;

  static asection *last_input_section = NULL;

  static arelent *last_reloc = NULL;

  /* The address of the thing to be relocated will have moved back by

     the size of the shrink - but we don't change reloc->address here,

     since we need it to know where the relocation lives in the source

     uncooked section.  */

  bfd_vma address = reloc->address - shrink;

  if (input_section != last_input_section)

    last_reloc = NULL;

  /* Only examine the relocs which might be relaxable.  */

  switch (reloc->howto->type)

    {

      /* This is the 16-/24-bit absolute branch which could become an

         8-bit pc-relative branch.  */

    case R_JMP1:

    case R_JMPL1:

      /* Get the address of the target of this branch.  */

      value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);

      /* Get the address of the next instruction (not the reloc).  */

      dot = (input_section->output_section->vma

             + input_section->output_offset + address);

      /* Adjust for R_JMP1 vs R_JMPL1.  */

      dot += (reloc->howto->type == R_JMP1 ? 1 : 2);

      /* Compute the distance from this insn to the branch target.  */

      gap = value - dot;

      /* If the distance is within -128..+128 inclusive, then we can relax

         this jump.  +128 is valid since the target will move two bytes

         closer if we do relax this branch.  */

      if ((int) gap >= -128 && (int) gap <= 128)

        {

          bfd_byte code;

          if (!bfd_get_section_contents (abfd, input_section, & code,

                                         reloc->address, 1))

            break;

          code = bfd_get_8 (abfd, & code);

          /* It's possible we may be able to eliminate this branch entirely;

             if the previous instruction is a branch around this instruction,

             and there's no label at this instruction, then we can reverse

             the condition on the previous branch and eliminate this jump.

               original:                        new:

                 bCC lab1                       bCC' lab2

                 jmp lab2

                lab1:                           lab1:

             This saves 4 bytes instead of two, and should be relatively

             common.

             Only perform this optimisation for jumps (code 0x5a) not

             subroutine calls, as otherwise it could transform:

                             mov.w   r0,r0

                             beq     .L1

                             jsr     @_bar

                      .L1:   rts

                      _bar:  rts

             into:

                             mov.w   r0,r0

                             bne     _bar

                             rts

                      _bar:  rts

             which changes the call (jsr) into a branch (bne).  */

          if (code == 0x5a

              && gap <= 126

              && last_reloc

              && last_reloc->howto->type == R_PCRBYTE)

            {

              bfd_vma last_value;

              last_value = bfd_coff_reloc16_get_value (last_reloc, link_info,

                                                       input_section) + 1;

              if (last_value == dot + 2

                  && last_reloc->address + 1 == reloc->address

                  && !h8300_symbol_address_p (abfd, input_section, dot - 2))

                {

                  reloc->howto = howto_table + 19;

                  last_reloc->howto = howto_table + 18;

                  last_reloc->sym_ptr_ptr = reloc->sym_ptr_ptr;

                  last_reloc->addend = reloc->addend;

                  shrink += 4;

                  bfd_perform_slip (abfd, 4, input_section, address);

                  break;

                }

            }

          /* Change the reloc type.  */

          reloc->howto = reloc->howto + 1;

          /* This shrinks this section by two bytes.  */

          shrink += 2;

          bfd_perform_slip (abfd, 2, input_section, address);

        }

      break;

    /* This is the 16-bit pc-relative branch which could become an 8-bit

       pc-relative branch.  */

    case R_PCRWORD:

      /* Get the address of the target of this branch, add one to the value

         because the addend field in PCrel jumps is off by -1.  */

      value = bfd_coff_reloc16_get_value (reloc, link_info, input_section) + 1;

      /* Get the address of the next instruction if we were to relax.  */

      dot = input_section->output_section->vma +

        input_section->output_offset + address;

      /* Compute the distance from this insn to the branch target.  */

      gap = value - dot;

      /* If the distance is within -128..+128 inclusive, then we can relax

         this jump.  +128 is valid since the target will move two bytes

         closer if we do relax this branch.  */

      if ((int) gap >= -128 && (int) gap <= 128)

        {

          /* Change the reloc type.  */

          reloc->howto = howto_table + 15;

          /* This shrinks this section by two bytes.  */

          shrink += 2;

          bfd_perform_slip (abfd, 2, input_section, address);

        }

      break;

    /* This is a 16-bit absolute address in a mov.b insn, which can

       become an 8-bit absolute address if it's in the right range.  */

    case R_MOV16B1:

      /* Get the address of the data referenced by this mov.b insn.  */

      value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);

      value = bfd_h8300_pad_address (abfd, value);

      /* If the address is in the top 256 bytes of the address space

         then we can relax this instruction.  */

      if (value >= 0xffffff00u)

        {

          /* Change the reloc type.  */

          reloc->howto = reloc->howto + 1;

          /* This shrinks this section by two bytes.  */

          shrink += 2;

          bfd_perform_slip (abfd, 2, input_section, address);

        }

      break;

    /* Similarly for a 24-bit absolute address in a mov.b.  Note that

       if we can't relax this into an 8-bit absolute, we'll fall through

       and try to relax it into a 16-bit absolute.  */

    case R_MOV24B1:

      /* Get the address of the data referenced by this mov.b insn.  */

      value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);

      value = bfd_h8300_pad_address (abfd, value);

      if (value >= 0xffffff00u)

        {

          /* Change the reloc type.  */

          reloc->howto = reloc->howto + 1;

          /* This shrinks this section by four bytes.  */

          shrink += 4;

          bfd_perform_slip (abfd, 4, input_section, address);

          /* Done with this reloc.  */

          break;

        }

      /* FALLTHROUGH and try to turn the 24-/32-bit reloc into a 16-bit

         reloc.  */

    /* This is a 24-/32-bit absolute address in a mov insn, which can

       become an 16-bit absolute address if it's in the right range.  */

    case R_MOVL1:

      /* Get the address of the data referenced by this mov insn.  */

      value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);

      value = bfd_h8300_pad_address (abfd, value);

      /* If the address is a sign-extended 16-bit value then we can

         relax this instruction.  */

      if (value <= 0x7fff || value >= 0xffff8000u)

        {

          /* Change the reloc type.  */

          reloc->howto = howto_table + 17;

          /* This shrinks this section by two bytes.  */

          shrink += 2;

          bfd_perform_slip (abfd, 2, input_section, address);

        }

      break;

      /* No other reloc types represent relaxing opportunities.  */

    default:

      break;

    }

  last_reloc = reloc;

  last_input_section = input_section;

  return shrink;

}

/* Handle relocations for the H8/300, including relocs for relaxed

   instructions.

   FIXME: Not all relocations check for overflow!  */

static void

h8300_reloc16_extra_cases (bfd *abfd, struct bfd_link_info *link_info,

                           struct bfd_link_order *link_order, arelent *reloc,

                           bfd_byte *data, unsigned int *src_ptr,

                           unsigned int *dst_ptr)

{

  unsigned int src_address = *src_ptr;

  unsigned int dst_address = *dst_ptr;

  asection *input_section = link_order->u.indirect.section;

  bfd_vma value;

  bfd_vma dot;

  int gap, tmp;

  unsigned char temp_code;

  switch (reloc->howto->type)

    {

    /* Generic 8-bit pc-relative relocation.  */

    case R_PCRBYTE:

      /* Get the address of the target of this branch.  */

      value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);

      dot = (input_section->output_offset

             + dst_address

             + link_order->u.indirect.section->output_section->vma);