URL https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [binutils-2.18.50/] [gas/] [config/] [tc-dlx.c] - Blame information for rev 866

Go to most recent revision | Details | Compare with Previous | View Log

/* tc-ldx.c -- Assemble for the DLX
   Copyright 2002, 2003, 2004, 2005, 2007 Free Software Foundation, Inc.
 
   This file is part of GAS, the GNU Assembler.
 
   GAS is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 3, or (at your option)
   any later version.
 
   GAS is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.
 
   You should have received a copy of the GNU General Public License
   along with GAS; see the file COPYING.  If not, write to the Free
   Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
   02110-1301, USA.  */
 
/* Initially created by Kuang Hwa Lin, 3/20/2002.  */
 
#include "safe-ctype.h"
#include "as.h"
#include "tc-dlx.h"
#include "opcode/dlx.h"
 
/* Make it easier to clone this machine desc into another one.  */
#define machine_opcode      dlx_opcode
#define machine_opcodes     dlx_opcodes
#define machine_ip          dlx_ip
#define machine_it          dlx_it
 
#define NO_RELOC            BFD_RELOC_NONE
#define RELOC_DLX_REL26     BFD_RELOC_DLX_JMP26
#define RELOC_DLX_16        BFD_RELOC_16
#define RELOC_DLX_REL16     BFD_RELOC_16_PCREL_S2
#define RELOC_DLX_HI16      BFD_RELOC_HI16_S
#define RELOC_DLX_LO16      BFD_RELOC_LO16
#define RELOC_DLX_VTINHERIT BFD_RELOC_VTABLE_INHERIT
#define RELOC_DLX_VTENTRY   BFD_RELOC_VTABLE_ENTRY
 
/* handle of the OPCODE hash table */
static struct hash_control *op_hash = NULL;
 
struct machine_it
{
  char *error;
  unsigned long opcode;
  struct nlist *nlistp;
  expressionS exp;
  int pcrel;
  int size;
  int reloc_offset;             /* Offset of reloc within insn.  */
  int reloc;
  int HI;
  int LO;
}
the_insn;
 
/* This array holds the chars that always start a comment.  If the
   pre-processor is disabled, these aren't very useful.  */
const char comment_chars[] = ";";
 
/* This array holds the chars that only start a comment at the beginning of
   a line.  If the line seems to have the form '# 123 filename'
   .line and .file directives will appear in the pre-processed output.  */
/* Note that input_file.c hand checks for '#' at the beginning of the
   first line of the input file.  This is because the compiler outputs
   #NO_APP at the beginning of its output.  */
/* Also note that comments like this one will always work.  */
const char line_comment_chars[] = "#";
 
/* We needed an unused char for line separation to work around the
   lack of macros, using sed and such.  */
const char line_separator_chars[] = "@";
 
/* Chars that can be used to separate mant from exp in floating point nums.  */
const char EXP_CHARS[] = "eE";
 
/* Chars that mean this number is a floating point constant.
   As in 0f12.456
   or    0d1.2345e12.  */
const char FLT_CHARS[] = "rRsSfFdDxXpP";
 
static void
insert_sreg (char *regname, int regnum)
{
  /* Must be large enough to hold the names of the special registers.  */
  char buf[80];
  int i;
 
  symbol_table_insert (symbol_new (regname, reg_section, (valueT) regnum,
                                   &zero_address_frag));
  for (i = 0; regname[i]; i++)
    buf[i] = ISLOWER (regname[i]) ? TOUPPER (regname[i]) : regname[i];
  buf[i] = '\0';
 
  symbol_table_insert (symbol_new (buf, reg_section, (valueT) regnum,
                                   &zero_address_frag));
}
 
/* Install symbol definitions for assorted special registers.
   See MIPS Assembly Language Programmer's Guide page 1-4   */
 
static void
define_some_regs (void)
{
  /* Software representation.  */
  insert_sreg ("zero",  0);
  insert_sreg ("at",    1);
  insert_sreg ("v0",    2);
  insert_sreg ("v1",    3);
  insert_sreg ("a0",    4);
  insert_sreg ("a1",    5);
  insert_sreg ("a2",    6);
  insert_sreg ("a3",    7);
  insert_sreg ("t0",    8);
  insert_sreg ("t1",    9);
  insert_sreg ("t2",    10);
  insert_sreg ("t3",    11);
  insert_sreg ("t4",    12);
  insert_sreg ("t5",    13);
  insert_sreg ("t6",    14);
  insert_sreg ("t7",    15);
  insert_sreg ("s0",    16);
  insert_sreg ("s1",    17);
  insert_sreg ("s2",    18);
  insert_sreg ("s3",    19);
  insert_sreg ("s4",    20);
  insert_sreg ("s5",    21);
  insert_sreg ("s6",    22);
  insert_sreg ("s7",    23);
  insert_sreg ("t8",    24);
  insert_sreg ("t9",    25);
  insert_sreg ("k0",    26);
  insert_sreg ("k1",    27);
  insert_sreg ("gp",    28);
  insert_sreg ("sp",    29);
  insert_sreg ("fp",    30);
  insert_sreg ("ra",    31);
  /* Special registers.  */
  insert_sreg ("pc",    0);
  insert_sreg ("npc",   1);
  insert_sreg ("iad",   2);
}
 
/* Subroutine check the string to match an register.  */
 
static int
match_sft_register (char *name)
{
#define MAX_REG_NO  35
/* Currently we have 35 software registers defined -
   we borrowed from MIPS.   */
  static char *soft_reg[] =
    {
      "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
      "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9",
      "s0", "s1", "s2", "s3", "s4", "s5", "s7", "k0", "k1",
      "gp", "sp", "fp", "ra", "pc", "npc", "iad",
      "EndofTab"  /* End of the Table indicator */
    };
  char low_name[21], *ptr;
  int idx;
 
  for (ptr = name,idx = 0; *ptr != '\0'; ptr++)
    low_name[idx++] = TOLOWER (*ptr);
 
  low_name[idx] = '\0';
  idx = 0;
 
  while (idx < MAX_REG_NO && strcmp (soft_reg[idx], & low_name [0]))
    idx += 1;
 
  return idx < MAX_REG_NO;
}
 
/* Subroutine check the string to match an register.  */
 
static int
is_ldst_registers (char *name)
{
  char *ptr = name;
 
  /* The first character of the register name got to be either %, $, r of R.  */
  if ((ptr[0] == '%' || ptr[0] == '$' || ptr[0] == 'r' || ptr[0] == 'R')
      && ISDIGIT ((unsigned char) ptr[1]))
    return 1;
 
  /* Now check the software register representation.  */
  return match_sft_register (ptr);
}
 
/* Subroutine of s_proc so targets can choose a different default prefix.
   If DEFAULT_PREFIX is NULL, use the target's "leading char".  */
 
static void
s_proc (int end_p)
{
  /* Record the current function so that we can issue an error message for
     misplaced .func,.endfunc, and also so that .endfunc needs no
     arguments.  */
  static char *current_name;
  static char *current_label;
 
  if (end_p)
    {
      if (current_name == NULL)
        {
          as_bad (_("missing .proc"));
          ignore_rest_of_line ();
          return;
        }
 
      current_name = current_label = NULL;
      SKIP_WHITESPACE ();
      while (!is_end_of_line[(unsigned char) *input_line_pointer])
        input_line_pointer++;
    }
  else
    {
      char *name, *label;
      char delim1, delim2;
 
      if (current_name != NULL)
        {
          as_bad (_(".endfunc missing for previous .proc"));
          ignore_rest_of_line ();
          return;
        }
 
      name = input_line_pointer;
      delim1 = get_symbol_end ();
      name = xstrdup (name);
      *input_line_pointer = delim1;
      SKIP_WHITESPACE ();
 
      if (*input_line_pointer != ',')
        {
          char leading_char = 0;
 
          leading_char = bfd_get_symbol_leading_char (stdoutput);
          /* Missing entry point, use function's name with the leading
             char prepended.  */
          if (leading_char)
            asprintf (&label, "%c%s", leading_char, name);
          else
            label = name;
        }
      else
        {
          ++input_line_pointer;
          SKIP_WHITESPACE ();
          label = input_line_pointer;
          delim2 = get_symbol_end ();
          label = xstrdup (label);
          *input_line_pointer = delim2;
        }
 
      current_name = name;
      current_label = label;
    }
  demand_empty_rest_of_line ();
}
 
/* This function is called once, at assembler startup time.  It should
   set up all the tables, etc., that the MD part of the assembler will
   need.  */
 
void
md_begin (void)
{
  const char *retval = NULL;
  int lose = 0;
  unsigned int i;
 
  /* Create a new hash table.  */
  op_hash = hash_new ();
 
  /* Hash up all the opcodes for fast use later.  */
  for (i = 0; i < num_dlx_opcodes; i++)
    {
      const char *name = machine_opcodes[i].name;
 
      retval = hash_insert (op_hash, name, (void *) &machine_opcodes[i]);
 
      if (retval != NULL)
        {
          fprintf (stderr, _("internal error: can't hash `%s': %s\n"),
                   machine_opcodes[i].name, retval);
          lose = 1;
        }
    }
 
  if (lose)
    as_fatal (_("Broken assembler.  No assembly attempted."));
 
  define_some_regs ();
}
 
/* This function will check the opcode and return 1 if the opcode is one
   of the load/store instruction, and it will fix the operand string to
   the standard form so we can use the standard parse_operand routine.  */
 
#define READ_OP     0x100
#define WRITE_OP    0x200
static char iBuf[81];
 
static char *
dlx_parse_loadop (char * str)
{
  char *ptr = str;
  int   idx = 0;
 
  /* The last pair of ()/[] is the register, all other are the
     reloc displacement, and if there is a register then it ought
     to have a pair of ()/[]
     This is not necessarily true, what if the load instruction come
     without the register and with %hi/%lo modifier?  */
  for (idx = 0; idx < 72 && ptr[idx] != '\0'; idx++)
    ;
 
  if (idx == 72)
    {
    badoperand_load:
      as_bad (_("Bad operand for a load instruction: <%s>"), str);
      return NULL;
    }
  else
    {
      int i, pb = 0;
      int m2 = 0;
      char rs1[7], rd[7], endm, match = '0';
      char imm[72];
 
      idx -= 1;
      switch (str[idx])
        {
        case ')':
          match = '(';
          endm  = ')';
          break;
        case ']':
          match = '[';
          endm  = ']';
          break;
        default:
          /* No register indicated, fill in zero.  */
          rs1[0] = 'r';
          rs1[1] = '0';
          rs1[2] = '\0';
          match  = 0;
          endm = 0;
          m2 = 1;
        }
 
      if (!m2)
        {
          /* Searching for (/[ which will match the ]/).  */
          for (pb = idx - 1; str[pb] != match; pb -= 1)
            /* Match can only be either '[' or '(', if it is
               '(' then this can be a normal expression, we'll treat
               it as an operand.  */
            if (str[pb] == endm || pb < (idx - 5))
              goto load_no_rs1;
          pb += 1;
 
          for (i = 0; (pb + i) < idx; i++)
            rs1[i] = str[pb+i];
 
          rs1[i] = '\0';
 
          if (is_ldst_registers (& rs1[0]))
            /* Point to the last character of the imm.  */
            pb -= 1;
          else
            {
            load_no_rs1:
              if (match == '[')
                goto badoperand_load;
              /* No register indicated, fill in zero and restore the imm.  */
              rs1[0] = 'r';
              rs1[1] = '0';
              rs1[2] = '\0';
              m2 = 1;
            }
        }
 
      /* Duplicate the first register.  */
      for (i = 0; i < 7 && str[i] != ','; i++)
        rd[i] = ptr[i];
 
      if (str[i] != ',')
        goto badoperand_load;
      else
        rd[i] = '\0';
 
      /* Copy the immd.  */
      if (m2)
        /* Put the '\0' back in.  */
        pb = idx + 1;
 
      for (i++, m2 = 0; i < pb; m2++,i++)
        imm[m2] = ptr[i];
 
      imm[m2] = '\0';
 
      /* Assemble the instruction to gas internal format.  */
      for (i = 0; rd[i] != '\0'; i++)
        iBuf[i] = rd[i];
 
      iBuf[i++] = ',';
 
      for (pb = 0 ; rs1[pb] != '\0'; i++, pb++)
        iBuf[i] = rs1[pb];
 
      iBuf[i++] = ',';
 
      for (pb = 0; imm[pb] != '\0'; i++, pb++)
        iBuf[i] = imm[pb];
 
      iBuf[i] = '\0';
      return iBuf;
    }
}
 
static char *
dlx_parse_storeop (char * str)
{
  char *ptr = str;
  int   idx = 0;
 
  /* Search for the ','.  */
  for (idx = 0; idx < 72 && ptr[idx] != ','; idx++)
    ;
 
  if (idx == 72)
    {
    badoperand_store:
      as_bad (_("Bad operand for a store instruction: <%s>"), str);
      return NULL;
    }
  else
    {
      /* idx now points to the ','.  */
      int i, pb = 0;
      int comma = idx;
      int m2 = 0;
      char rs1[7], rd[7], endm, match = '0';
      char imm[72];
 
      /* Now parse the '(' and ')', and make idx point to ')'.  */
      idx -= 1;
      switch (str[idx])
        {
        case ')':
          match = '(';
          endm  = ')';
          break;
        case ']':
          match = '[';
          endm  = ']';
          break;
        default:
          /* No register indicated, fill in zero.  */
          rs1[0] = 'r';
          rs1[1] = '0';
          rs1[2] = '\0';
          match  = 0;
          endm = 0;
          m2 = 1;
        }
 
      if (!m2)
        {
          /* Searching for (/[ which will match the ]/).  */
          for (pb = idx - 1; str[pb] != match; pb -= 1)
            if (pb < (idx - 5) || str[pb] == endm)
              goto store_no_rs1;
          pb += 1;
 
          for (i = 0; (pb + i) < idx; i++)
            rs1[i] = str[pb + i];
 
          rs1[i] = '\0';
 
          if (is_ldst_registers (& rs1[0]))
            /* Point to the last character of the imm.  */
            pb -= 1;
          else
            {
            store_no_rs1:
              if (match == '[')
                goto badoperand_store;
 
              /* No register indicated, fill in zero and restore the imm.  */
              rs1[0] = 'r';
              rs1[1] = '0';
              rs1[2] = '\0';
              pb = comma;
            }
        }
      else
        /* No register was specified.  */
        pb = comma;
 
      /* Duplicate the first register.  */
      for (i = comma + 1; (str[i] == ' ' || str[i] == '\t'); i++)
        ;
 
      for (m2 = 0; (m2 < 7 && str[i] != '\0'); i++, m2++)
        {
          if (str[i] != ' ' && str[i] != '\t')
            rd[m2] = str[i];
          else
            goto badoperand_store;
        }
 
      if (str[i] != '\0')
        goto badoperand_store;
      else
        rd[m2] = '\0';
 
      /* Copy the immd.  */
      for (i = 0; i < pb; i++)
        imm[i] = ptr[i];
 
      imm[i] = '\0';
 
      /* Assemble the instruction to gas internal format.  */
      for (i = 0; rd[i] != '\0'; i++)
        iBuf[i] = rd[i];
      iBuf[i++] = ',';
      for (pb = 0 ; rs1[pb] != '\0'; i++, pb++)
        iBuf[i] = rs1[pb];
      iBuf[i++] = ',';
      for (pb = 0; imm[pb] != '\0'; i++, pb++)
        iBuf[i] = imm[pb];
      iBuf[i] = '\0';
      return iBuf;
    }
}
 
static char *
fix_ld_st_operand (unsigned long opcode, char* str)
{
  /* Check the opcode.  */
  switch ((int) opcode)
    {
    case  LBOP:
    case  LBUOP:
    case  LSBUOP:
    case  LHOP:
    case  LHUOP:
    case  LSHUOP:
    case  LWOP:
    case  LSWOP:
      return dlx_parse_loadop (str);
    case  SBOP:
    case  SHOP:
    case  SWOP:
      return dlx_parse_storeop (str);
    default:
      return str;
    }
}
 
static int
hilo_modifier_ok (char *s)
{
  char *ptr = s;
  int   idx, count = 1;
 
  if (*ptr != '(')
    return 1;
 
  for (idx = 1; ptr[idx] != '\0' && ptr[idx] != '[' && idx < 73; idx += 1)
    {
      if (count == 0)
        return count;
 
      if (ptr[idx] == '(')
        count += 1;
 
      if (ptr[idx] == ')')
        count -= 1;
    }
 
  return (count == 0) ? 1:0;
}
 
static char *
parse_operand (char *s, expressionS *operandp)
{
  char *save = input_line_pointer;
  char *new;
 
  the_insn.HI = the_insn.LO = 0;
 
  /* Search for %hi and %lo, make a mark and skip it.  */
  if (strncmp (s, "%hi", 3) == 0)
    {
      s += 3;
      the_insn.HI = 1;
    }
  else
    {
      if (strncmp (s, "%lo", 3) == 0)
        {
          s += 3;
          the_insn.LO = 1;
        }
      else
        the_insn.LO = 0;
    }
 
  if (the_insn.HI || the_insn.LO)
    {
      if (!hilo_modifier_ok (s))
        as_bad (_("Expression Error for operand modifier %%hi/%%lo\n"));
    }
 
  /* Check for the % and $ register representation    */
  if ((s[0] == '%' || s[0] == '$' || s[0] == 'r' || s[0] == 'R')
      && ISDIGIT ((unsigned char) s[1]))
    {
      /* We have a numeric register expression.  No biggy.  */
      s += 1;
      input_line_pointer = s;
      (void) expression (operandp);
      if (operandp->X_op != O_constant
          || operandp->X_add_number > 31)
        as_bad (_("Invalid expression after %%%%\n"));
      operandp->X_op = O_register;
    }
  else
    {
      /* Normal operand parsing.  */
      input_line_pointer = s;
      (void) expression (operandp);
    }
 
  new = input_line_pointer;
  input_line_pointer = save;
  return new;
}
 
/* Instruction parsing.  Takes a string containing the opcode.
   Operands are at input_line_pointer.  Output is in the_insn.
   Warnings or errors are generated.  */
 
static void
machine_ip (char *str)
{
  char *s;
  const char *args;
  struct machine_opcode *insn;
  char *argsStart;
  unsigned long opcode;
  expressionS the_operand;
  expressionS *operand = &the_operand;
  unsigned int reg, reg_shift = 0;
 
  /* Fixup the opcode string to all lower cases, and also
     allow numerical digits.  */
  s = str;
 
  if (ISALPHA (*s))
    for (; ISALNUM (*s); ++s)
      if (ISUPPER (*s))
        *s = TOLOWER (*s);
 
  switch (*s)
    {
    case '\0':
      break;
 
      /* FIXME-SOMEDAY more whitespace.  */
    case ' ':
      *s++ = '\0';
      break;
 
    default:
      as_bad (_("Unknown opcode: `%s'"), str);
      return;
    }
 
  /* Hash the opcode, insn will have the string from opcode table.
     also initialized the_insn struct.  */
  if ((insn = (struct machine_opcode *) hash_find (op_hash, str)) == NULL)
    {
      /* Handle the ret and return macro here.  */
      if ((strcmp (str, "ret") == 0) || (strcmp (str, "return") == 0))
        {
          memset (&the_insn, '\0', sizeof (the_insn));
          the_insn.reloc = NO_RELOC;
          the_insn.pcrel = 0;
          the_insn.opcode =
            (unsigned long)(JROP | 0x03e00000);    /* 0x03e00000 = r31 << 21 */
        }
      else
        as_bad (_("Unknown opcode `%s'."), str);
 
      return;
    }
 
  argsStart = s;
  opcode = insn->opcode;
  memset (&the_insn, '\0', sizeof (the_insn));
  the_insn.reloc = NO_RELOC;
  the_insn.pcrel = 0;
 
  /* Set the sip reloc HI16 flag.  */
  if (!set_dlx_skip_hi16_flag (1))
    as_bad (_("Can not set dlx_skip_hi16_flag"));
 
  /* Fix the operand string if it is one of load store instructions.  */
  s = fix_ld_st_operand (opcode, s);
 
  /* Build the opcode, checking as we go to make sure that the
     operands match.
     If an operand matches, we modify the_insn or opcode appropriately,
     and do a "continue".  If an operand fails to match, we "break".  */
  if (insn->args[0] != '\0' && insn->args[0] != 'N')
    {
      /* Prime the pump.  */
      if (*s == '\0')
        {
          as_bad (_("Missing arguments for opcode <%s>."), str);
          return;
        }
      else
        s = parse_operand (s, operand);
    }
  else if (insn->args[0] == 'N')
    {
      /* Clean up the insn and done!  */
      the_insn.opcode = opcode;
      return;
    }
 
  /* Parse through the args (this is from opcode table), *s point to
     the current character of the instruction stream.  */
  for (args = insn->args;; ++args)
    {
      switch (*args)
        {
          /* End of Line.  */
        case '\0':
          /* End of args.  */
          if (*s == '\0')
            {
              /* We are truly done.  */
              the_insn.opcode = opcode;
              /* Clean up the HI and LO mark.  */
              the_insn.HI = 0;
              the_insn.LO = 0;
              return;
            }
 
          the_insn.HI = 0;
          the_insn.LO = 0;
          as_bad (_("Too many operands: %s"), s);
          break;
 
          /* ',' Args separator */
        case ',':
          /* Must match a comma.  */
          if (*s++ == ',')
            {
              /* Parse next operand.  */
              s = parse_operand (s, operand);
              continue;
            }
          break;
 
          /* It can be a 'a' register or 'i' operand.  */
        case 'P':
          /* Macro move operand/reg.  */
          if (operand->X_op == O_register)
            {
              /* Its a register.  */
              reg_shift = 21;
              goto general_reg;
            }
 
          /* The immediate 16 bits literal, bit 0-15.  */
        case 'i':
          /* offset, unsigned.  */
        case 'I':
          /* offset, signed.  */
          if (operand->X_op == O_constant)
            {
              if (the_insn.HI)
                operand->X_add_number >>= 16;
 
              opcode |= operand->X_add_number & 0xFFFF;
 
              if (the_insn.HI && the_insn.LO)
                as_bad (_("Both the_insn.HI and the_insn.LO are set : %s"), s);
              else
                {
                  the_insn.HI = 0;
                  the_insn.LO = 0;
                }
              continue;
            }
 
          the_insn.reloc        = (the_insn.HI) ? RELOC_DLX_HI16
            : (the_insn.LO ? RELOC_DLX_LO16 : RELOC_DLX_16);
          the_insn.reloc_offset = 2;
          the_insn.size         = 2;
          the_insn.pcrel        = 0;
          the_insn.exp          = * operand;
          the_insn.HI           = 0;
          the_insn.LO           = 0;
          continue;
 
        case 'd':
          /* offset, signed.  */
          if (operand->X_op == O_constant)
            {
              opcode |= operand->X_add_number & 0xFFFF;
              continue;
            }
          the_insn.reloc        = RELOC_DLX_REL16;
          the_insn.reloc_offset = 0;    /* BIG-ENDIAN Byte 3 of insn.  */
          the_insn.size         = 4;
          the_insn.pcrel        = 1;
          the_insn.exp          = *operand;
          continue;
 
          /* The immediate 26 bits literal, bit 0-25.  */
        case 'D':
          /* offset, signed.  */
          if (operand->X_op == O_constant)
            {
              opcode |= operand->X_add_number & 0x3FFFFFF;
              continue;
            }
          the_insn.reloc = RELOC_DLX_REL26;
          the_insn.reloc_offset = 0;    /* BIG-ENDIAN Byte 3 of insn.  */
          the_insn.size  = 4;
          the_insn.pcrel = 1;
          the_insn.exp = *operand;
          continue;
 
          /* Type 'a' Register.  */
        case 'a':
          /* A general register at bits 21-25, rs1.  */
          reg_shift = 21;
          goto general_reg;
 
          /* Type 'b' Register.  */
        case 'b':
          /* A general register at bits 16-20, rs2/rd.  */
          reg_shift = 16;
          goto general_reg;
 
          /* Type 'c' Register.  */
        case 'c':
          /* A general register at bits 11-15, rd.  */
          reg_shift = 11;
 
        general_reg:
          know (operand->X_add_symbol == 0);
          know (operand->X_op_symbol == 0);
          reg = operand->X_add_number;
          if (reg & 0xffffffe0)
            as_fatal (_("failed regnum sanity check."));
          else
            /* Got the register, now figure out where it goes in the opcode.  */
            opcode |= reg << reg_shift;
 
          switch (*args)
            {
            case 'a':
            case 'b':
            case 'c':
            case 'P':
              continue;
            }
          as_fatal (_("failed general register sanity check."));
          break;
 
        default:
          BAD_CASE (*args);
        }
 
      /* Types or values of args don't match.  */
      as_bad (_("Invalid operands"));
      return;
    }
}
 
/* Assemble a single instruction.  Its label has already been handled
   by the generic front end.  We just parse opcode and operands, and
   produce the bytes of data and relocation.  */
 
void
md_assemble (char *str)
{
  char *toP;
  fixS *fixP;
  bit_fixS *bitP;
 
  know (str);
  machine_ip (str);
  toP = frag_more (4);
  /* Put out the opcode.  */
  md_number_to_chars (toP, the_insn.opcode, 4);
 
  /* Put out the symbol-dependent stuff.  */
  if (the_insn.reloc != NO_RELOC)
    {
      fixP = fix_new_exp (frag_now,
                          (toP - frag_now->fr_literal + the_insn.reloc_offset),
                          the_insn.size, & the_insn.exp, the_insn.pcrel,
                          the_insn.reloc);
 
      /* Turn off complaints that the addend is
         too large for things like foo+100000@ha.  */
      switch (the_insn.reloc)
        {
        case RELOC_DLX_HI16:
        case RELOC_DLX_LO16:
          fixP->fx_no_overflow = 1;
          break;
        default:
          break;
        }
 
      switch (fixP->fx_r_type)
        {
        case RELOC_DLX_REL26:
          bitP = malloc (sizeof (bit_fixS));
          bitP->fx_bit_size = 26;
          bitP->fx_bit_offset = 25;
          bitP->fx_bit_base = the_insn.opcode & 0xFC000000;
          bitP->fx_bit_base_adj = 0;
          bitP->fx_bit_max = 0;
          bitP->fx_bit_min = 0;
          bitP->fx_bit_add = 0x03FFFFFF;
          fixP->fx_bit_fixP = bitP;
          break;
        case RELOC_DLX_LO16:
        case RELOC_DLX_REL16:
          bitP = malloc (sizeof (bit_fixS));
          bitP->fx_bit_size = 16;
          bitP->fx_bit_offset = 15;
          bitP->fx_bit_base = the_insn.opcode & 0xFFFF0000;
          bitP->fx_bit_base_adj = 0;
          bitP->fx_bit_max = 0;
          bitP->fx_bit_min = 0;
          bitP->fx_bit_add = 0x0000FFFF;
          fixP->fx_bit_fixP = bitP;
          break;
        case RELOC_DLX_HI16:
          bitP = malloc (sizeof (bit_fixS));
          bitP->fx_bit_size = 16;
          bitP->fx_bit_offset = 15;
          bitP->fx_bit_base = the_insn.opcode & 0xFFFF0000;
          bitP->fx_bit_base_adj = 0;
          bitP->fx_bit_max = 0;
          bitP->fx_bit_min = 0;
          bitP->fx_bit_add = 0x0000FFFF;
          fixP->fx_bit_fixP = bitP;
          break;
        default:
          fixP->fx_bit_fixP = NULL;
          break;
        }
    }
}
 
/* This is identical to the md_atof in m68k.c.  I think this is right,
   but I'm not sure.  Dlx will not use it anyway, so I just leave it
   here for now.  */
 
char *
md_atof (int type, char *litP, int *sizeP)
{
  return ieee_md_atof (type, litP, sizeP, TRUE);
}
 
/* Write out big-endian.  */
void
md_number_to_chars (char *buf, valueT val, int n)
{
  number_to_chars_bigendian (buf, val, n);
}
 
bfd_boolean
md_dlx_fix_adjustable (fixS *fixP)
{
  /* We need the symbol name for the VTABLE entries.  */
  return (fixP->fx_r_type != BFD_RELOC_VTABLE_INHERIT
          && fixP->fx_r_type != BFD_RELOC_VTABLE_ENTRY);
}
 
void
md_apply_fix (fixS *fixP, valueT *valP, segT seg ATTRIBUTE_UNUSED)
{
  long val = *valP;
  char *place = fixP->fx_where + fixP->fx_frag->fr_literal;
 
  switch (fixP->fx_r_type)
    {
    case RELOC_DLX_LO16:
    case RELOC_DLX_REL16:
      if (fixP->fx_bit_fixP != NULL)
        {
          val = (val & 0x0000FFFF) | fixP->fx_bit_fixP->fx_bit_base;
          free (fixP->fx_bit_fixP);
          fixP->fx_bit_fixP = NULL;
        }
#ifdef DEBUG
      else
        know ((fixP->fx_bit_fixP != NULL));
#endif
      break;
 
    case RELOC_DLX_HI16:
      if (fixP->fx_bit_fixP != NULL)
        {
          val = (val >> 16) | fixP->fx_bit_fixP->fx_bit_base;
          free (fixP->fx_bit_fixP);
          fixP->fx_bit_fixP = NULL;
        }
#ifdef DEBUG
      else
        know ((fixP->fx_bit_fixP != NULL));
#endif
      break;
 
    case RELOC_DLX_REL26:
      if (fixP->fx_bit_fixP != NULL)
        {
          val = (val & 0x03FFFFFF) | fixP->fx_bit_fixP->fx_bit_base;
          free (fixP->fx_bit_fixP);
          fixP->fx_bit_fixP = NULL;
        }
#ifdef DEBUG
      else
        know ((fixP->fx_bit_fixP != NULL));
#endif
      break;
 
    case BFD_RELOC_VTABLE_INHERIT:
      /* This borrowed from tc-ppc.c on a whim.  */
      fixP->fx_done = 0;
      if (fixP->fx_addsy
          && !S_IS_DEFINED (fixP->fx_addsy)
          && !S_IS_WEAK (fixP->fx_addsy))
        S_SET_WEAK (fixP->fx_addsy);
      return;
 
    case BFD_RELOC_VTABLE_ENTRY:
      fixP->fx_done = 0;
      return;
 
    default:
      break;
    }
 
  number_to_chars_bigendian (place, val, fixP->fx_size);
  if (fixP->fx_addsy == NULL)
    fixP->fx_done = 1;
}
 
const char *md_shortopts = "";
 
struct option md_longopts[] =
  {
    {NULL, no_argument, NULL, 0}
  };
 
size_t md_longopts_size = sizeof (md_longopts);
 
int
md_parse_option (int c     ATTRIBUTE_UNUSED,
                 char *arg ATTRIBUTE_UNUSED)
{
  return 0;
}
 
void
md_show_usage (FILE *stream ATTRIBUTE_UNUSED)
{
}
 
/* This is called when a line is unrecognized.  */
 
int
dlx_unrecognized_line (int c)
{
  int lab;
  char *s;
 
  if (c != '$' || ! ISDIGIT ((unsigned char) input_line_pointer[0]))
    return 0;
 
  s = input_line_pointer;
 
  lab = 0;
  while (ISDIGIT ((unsigned char) *s))
    {
      lab = lab * 10 + *s - '0';
      ++s;
    }
 
  if (*s != ':')
    /* Not a label definition.  */
    return 0;
 
  if (dollar_label_defined (lab))
    {
      as_bad (_("label \"$%d\" redefined"), lab);
      return 0;
    }
 
  define_dollar_label (lab);
  colon (dollar_label_name (lab, 0));
  input_line_pointer = s + 1;
 
  return 1;
}
 
/* Default the values of symbols known that should be "predefined".  We
   don't bother to predefine them unless you actually use one, since there
   are a lot of them.  */
 
symbolS *
md_undefined_symbol (char *name ATTRIBUTE_UNUSED)
{
  return NULL;
}
 
/* Parse an operand that is machine-specific, the function was called
   in expr.c by operand() function, when everything failed before it
   call a quit.  */
 
void
md_operand (expressionS* expressionP)
{
  /* Check for the #number representation    */
  if (input_line_pointer[0] == '#' &&
      ISDIGIT ((unsigned char) input_line_pointer[1]))
    {
      /* We have a numeric number expression.  No biggy.  */
      input_line_pointer += 1;  /* Skip # */
 
      (void) expression (expressionP);
 
      if (expressionP->X_op != O_constant)
        as_bad (_("Invalid expression after # number\n"));
    }
 
  return;
}
 
/* Round up a section size to the appropriate boundary.  */
 
valueT
md_section_align (segT segment ATTRIBUTE_UNUSED,
                  valueT size)
{
  /* Byte alignment is fine.  */
  return size;
}
 
/* Exactly what point is a PC-relative offset relative TO?
   On the 29000, they're relative to the address of the instruction,
   which we have set up as the address of the fixup too.  */
 
long
md_pcrel_from (fixS* fixP)
{
  return 4 + fixP->fx_where + fixP->fx_frag->fr_address;
}
 
/* Translate internal representation of relocation info to BFD target
   format.
   FIXME: To what extent can we get all relevant targets to use this?
   The above FIXME is from a29k, but I think it is also needed here.    */
 
arelent *
tc_gen_reloc (asection *section ATTRIBUTE_UNUSED,
              fixS *fixP)
{
  arelent * reloc;
 
  reloc = xmalloc (sizeof (arelent));
  reloc->howto = bfd_reloc_type_lookup (stdoutput, fixP->fx_r_type);
 
  if (reloc->howto == NULL)
    {
      as_bad_where (fixP->fx_file, fixP->fx_line,
                    _("internal error: can't export reloc type %d (`%s')"),
                    fixP->fx_r_type,
                    bfd_get_reloc_code_name (fixP->fx_r_type));
      return NULL;
    }
 
  assert (!fixP->fx_pcrel == !reloc->howto->pc_relative);
 
  reloc->sym_ptr_ptr = xmalloc (sizeof (asymbol *));
  *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixP->fx_addsy);
  reloc->address = fixP->fx_frag->fr_address + fixP->fx_where;
 
  if (fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
    reloc->address = fixP->fx_offset;
  reloc->addend = 0;
 
  return reloc;
}
 
const pseudo_typeS
dlx_pseudo_table[] =
{
  /* Some additional ops that are used by gcc-dlx.  */
  {"asciiz", stringer, 8 + 1},
  {"half", cons, 2},
  {"dword", cons, 8},
  {"word", cons, 4},
  {"proc", s_proc, 0},
  {"endproc", s_proc, 1},
  {NULL, NULL, 0}
};
 
void
dlx_pop_insert (void)
{
  pop_insert (dlx_pseudo_table);
  return ;
}
 
Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [binutils-2.18.50/] [gas/] [config/] [tc-dlx.c] - Blame information for rev 866

Line No.	Rev	Author	Line
1	38	julius	`/* tc-ldx.c -- Assemble for the DLX`
2			`Copyright 2002, 2003, 2004, 2005, 2007 Free Software Foundation, Inc.`
3
4			`This file is part of GAS, the GNU Assembler.`
5
6			`GAS is free software; you can redistribute it and/or modify`
7			`it under the terms of the GNU General Public License as published by`
8			`the Free Software Foundation; either version 3, or (at your option)`
9			`any later version.`
10
11			`GAS is distributed in the hope that it will be useful,`
12			`but WITHOUT ANY WARRANTY; without even the implied warranty of`
13			`MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
14			`GNU General Public License for more details.`
15
16			`You should have received a copy of the GNU General Public License`
17			`along with GAS; see the file COPYING. If not, write to the Free`
18			`Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA`
19			`02110-1301, USA. */`
20
21			`/* Initially created by Kuang Hwa Lin, 3/20/2002. */`
22
23			`#include "safe-ctype.h"`
24			`#include "as.h"`
25			`#include "tc-dlx.h"`
26			`#include "opcode/dlx.h"`
27
28			`/* Make it easier to clone this machine desc into another one. */`
29			`#define machine_opcode dlx_opcode`
30			`#define machine_opcodes dlx_opcodes`
31			`#define machine_ip dlx_ip`
32			`#define machine_it dlx_it`
33
34			`#define NO_RELOC BFD_RELOC_NONE`
35			`#define RELOC_DLX_REL26 BFD_RELOC_DLX_JMP26`
36			`#define RELOC_DLX_16 BFD_RELOC_16`
37			`#define RELOC_DLX_REL16 BFD_RELOC_16_PCREL_S2`
38			`#define RELOC_DLX_HI16 BFD_RELOC_HI16_S`
39			`#define RELOC_DLX_LO16 BFD_RELOC_LO16`
40			`#define RELOC_DLX_VTINHERIT BFD_RELOC_VTABLE_INHERIT`