OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [binutils-2.18.50/] [gas/] [expr.c] - Blame information for rev 853

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 38 julius
/* expr.c -operands, expressions-
2
   Copyright 1987, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
3
   1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
4
   Free Software Foundation, Inc.
5
 
6
   This file is part of GAS, the GNU Assembler.
7
 
8
   GAS is free software; you can redistribute it and/or modify
9
   it under the terms of the GNU General Public License as published by
10
   the Free Software Foundation; either version 3, or (at your option)
11
   any later version.
12
 
13
   GAS is distributed in the hope that it will be useful,
14
   but WITHOUT ANY WARRANTY; without even the implied warranty of
15
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16
   GNU General Public License for more details.
17
 
18
   You should have received a copy of the GNU General Public License
19
   along with GAS; see the file COPYING.  If not, write to the Free
20
   Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
21
   02110-1301, USA.  */
22
 
23
/* This is really a branch office of as-read.c. I split it out to clearly
24
   distinguish the world of expressions from the world of statements.
25
   (It also gives smaller files to re-compile.)
26
   Here, "operand"s are of expressions, not instructions.  */
27
 
28
#define min(a, b)       ((a) < (b) ? (a) : (b))
29
 
30
#include "as.h"
31
#include "safe-ctype.h"
32
#include "obstack.h"
33
 
34
static void floating_constant (expressionS * expressionP);
35
static valueT generic_bignum_to_int32 (void);
36
#ifdef BFD64
37
static valueT generic_bignum_to_int64 (void);
38
#endif
39
static void integer_constant (int radix, expressionS * expressionP);
40
static void mri_char_constant (expressionS *);
41
static void current_location (expressionS *);
42
static void clean_up_expression (expressionS * expressionP);
43
static segT operand (expressionS *, enum expr_mode);
44
static operatorT operator (int *);
45
 
46
extern const char EXP_CHARS[], FLT_CHARS[];
47
 
48
/* We keep a mapping of expression symbols to file positions, so that
49
   we can provide better error messages.  */
50
 
51
struct expr_symbol_line {
52
  struct expr_symbol_line *next;
53
  symbolS *sym;
54
  char *file;
55
  unsigned int line;
56
};
57
 
58
static struct expr_symbol_line *expr_symbol_lines;
59
 
60
/* Build a dummy symbol to hold a complex expression.  This is how we
61
   build expressions up out of other expressions.  The symbol is put
62
   into the fake section expr_section.  */
63
 
64
symbolS *
65
make_expr_symbol (expressionS *expressionP)
66
{
67
  expressionS zero;
68
  symbolS *symbolP;
69
  struct expr_symbol_line *n;
70
 
71
  if (expressionP->X_op == O_symbol
72
      && expressionP->X_add_number == 0)
73
    return expressionP->X_add_symbol;
74
 
75
  if (expressionP->X_op == O_big)
76
    {
77
      /* This won't work, because the actual value is stored in
78
         generic_floating_point_number or generic_bignum, and we are
79
         going to lose it if we haven't already.  */
80
      if (expressionP->X_add_number > 0)
81
        as_bad (_("bignum invalid"));
82
      else
83
        as_bad (_("floating point number invalid"));
84
      zero.X_op = O_constant;
85
      zero.X_add_number = 0;
86
      zero.X_unsigned = 0;
87
      clean_up_expression (&zero);
88
      expressionP = &zero;
89
    }
90
 
91
  /* Putting constant symbols in absolute_section rather than
92
     expr_section is convenient for the old a.out code, for which
93
     S_GET_SEGMENT does not always retrieve the value put in by
94
     S_SET_SEGMENT.  */
95
  symbolP = symbol_create (FAKE_LABEL_NAME,
96
                           (expressionP->X_op == O_constant
97
                            ? absolute_section
98
                            : expressionP->X_op == O_register
99
                              ? reg_section
100
                              : expr_section),
101
                           0, &zero_address_frag);
102
  symbol_set_value_expression (symbolP, expressionP);
103
 
104
  if (expressionP->X_op == O_constant)
105
    resolve_symbol_value (symbolP);
106
 
107
  n = (struct expr_symbol_line *) xmalloc (sizeof *n);
108
  n->sym = symbolP;
109
  as_where (&n->file, &n->line);
110
  n->next = expr_symbol_lines;
111
  expr_symbol_lines = n;
112
 
113
  return symbolP;
114
}
115
 
116
/* Return the file and line number for an expr symbol.  Return
117
   non-zero if something was found, 0 if no information is known for
118
   the symbol.  */
119
 
120
int
121
expr_symbol_where (symbolS *sym, char **pfile, unsigned int *pline)
122
{
123
  register struct expr_symbol_line *l;
124
 
125
  for (l = expr_symbol_lines; l != NULL; l = l->next)
126
    {
127
      if (l->sym == sym)
128
        {
129
          *pfile = l->file;
130
          *pline = l->line;
131
          return 1;
132
        }
133
    }
134
 
135
  return 0;
136
}
137
 
138
/* Utilities for building expressions.
139
   Since complex expressions are recorded as symbols for use in other
140
   expressions these return a symbolS * and not an expressionS *.
141
   These explicitly do not take an "add_number" argument.  */
142
/* ??? For completeness' sake one might want expr_build_symbol.
143
   It would just return its argument.  */
144
 
145
/* Build an expression for an unsigned constant.
146
   The corresponding one for signed constants is missing because
147
   there's currently no need for it.  One could add an unsigned_p flag
148
   but that seems more clumsy.  */
149
 
150
symbolS *
151
expr_build_uconstant (offsetT value)
152
{
153
  expressionS e;
154
 
155
  e.X_op = O_constant;
156
  e.X_add_number = value;
157
  e.X_unsigned = 1;
158
  return make_expr_symbol (&e);
159
}
160
 
161
/* Build an expression for the current location ('.').  */
162
 
163
symbolS *
164
expr_build_dot (void)
165
{
166
  expressionS e;
167
 
168
  current_location (&e);
169
  return make_expr_symbol (&e);
170
}
171
 
172
/* Build any floating-point literal here.
173
   Also build any bignum literal here.  */
174
 
175
/* Seems atof_machine can backscan through generic_bignum and hit whatever
176
   happens to be loaded before it in memory.  And its way too complicated
177
   for me to fix right.  Thus a hack.  JF:  Just make generic_bignum bigger,
178
   and never write into the early words, thus they'll always be zero.
179
   I hate Dean's floating-point code.  Bleh.  */
180
LITTLENUM_TYPE generic_bignum[SIZE_OF_LARGE_NUMBER + 6];
181
 
182
FLONUM_TYPE generic_floating_point_number = {
183
  &generic_bignum[6],           /* low.  (JF: Was 0)  */
184
  &generic_bignum[SIZE_OF_LARGE_NUMBER + 6 - 1], /* high.  JF: (added +6)  */
185
  0,                             /* leader.  */
186
  0,                             /* exponent.  */
187
 
188
};
189
 
190
 
191
static void
192
floating_constant (expressionS *expressionP)
193
{
194
  /* input_line_pointer -> floating-point constant.  */
195
  int error_code;
196
 
197
  error_code = atof_generic (&input_line_pointer, ".", EXP_CHARS,
198
                             &generic_floating_point_number);
199
 
200
  if (error_code)
201
    {
202
      if (error_code == ERROR_EXPONENT_OVERFLOW)
203
        {
204
          as_bad (_("bad floating-point constant: exponent overflow"));
205
        }
206
      else
207
        {
208
          as_bad (_("bad floating-point constant: unknown error code=%d"),
209
                  error_code);
210
        }
211
    }
212
  expressionP->X_op = O_big;
213
  /* input_line_pointer -> just after constant, which may point to
214
     whitespace.  */
215
  expressionP->X_add_number = -1;
216
}
217
 
218
static valueT
219
generic_bignum_to_int32 (void)
220
{
221
  valueT number =
222
           ((generic_bignum[1] & LITTLENUM_MASK) << LITTLENUM_NUMBER_OF_BITS)
223
           | (generic_bignum[0] & LITTLENUM_MASK);
224
  number &= 0xffffffff;
225
  return number;
226
}
227
 
228
#ifdef BFD64
229
static valueT
230
generic_bignum_to_int64 (void)
231
{
232
  valueT number =
233
    ((((((((valueT) generic_bignum[3] & LITTLENUM_MASK)
234
          << LITTLENUM_NUMBER_OF_BITS)
235
         | ((valueT) generic_bignum[2] & LITTLENUM_MASK))
236
        << LITTLENUM_NUMBER_OF_BITS)
237
       | ((valueT) generic_bignum[1] & LITTLENUM_MASK))
238
      << LITTLENUM_NUMBER_OF_BITS)
239
     | ((valueT) generic_bignum[0] & LITTLENUM_MASK));
240
  return number;
241
}
242
#endif
243
 
244
static void
245
integer_constant (int radix, expressionS *expressionP)
246
{
247
  char *start;          /* Start of number.  */
248
  char *suffix = NULL;
249
  char c;
250
  valueT number;        /* Offset or (absolute) value.  */
251
  short int digit;      /* Value of next digit in current radix.  */
252
  short int maxdig = 0;  /* Highest permitted digit value.  */
253
  int too_many_digits = 0;       /* If we see >= this number of.  */
254
  char *name;           /* Points to name of symbol.  */
255
  symbolS *symbolP;     /* Points to symbol.  */
256
 
257
  int small;                    /* True if fits in 32 bits.  */
258
 
259
  /* May be bignum, or may fit in 32 bits.  */
260
  /* Most numbers fit into 32 bits, and we want this case to be fast.
261
     so we pretend it will fit into 32 bits.  If, after making up a 32
262
     bit number, we realise that we have scanned more digits than
263
     comfortably fit into 32 bits, we re-scan the digits coding them
264
     into a bignum.  For decimal and octal numbers we are
265
     conservative: Some numbers may be assumed bignums when in fact
266
     they do fit into 32 bits.  Numbers of any radix can have excess
267
     leading zeros: We strive to recognise this and cast them back
268
     into 32 bits.  We must check that the bignum really is more than
269
     32 bits, and change it back to a 32-bit number if it fits.  The
270
     number we are looking for is expected to be positive, but if it
271
     fits into 32 bits as an unsigned number, we let it be a 32-bit
272
     number.  The cavalier approach is for speed in ordinary cases.  */
273
  /* This has been extended for 64 bits.  We blindly assume that if
274
     you're compiling in 64-bit mode, the target is a 64-bit machine.
275
     This should be cleaned up.  */
276
 
277
#ifdef BFD64
278
#define valuesize 64
279
#else /* includes non-bfd case, mostly */
280
#define valuesize 32
281
#endif
282
 
283
  if ((NUMBERS_WITH_SUFFIX || flag_m68k_mri) && radix == 0)
284
    {
285
      int flt = 0;
286
 
287
      /* In MRI mode, the number may have a suffix indicating the
288
         radix.  For that matter, it might actually be a floating
289
         point constant.  */
290
      for (suffix = input_line_pointer; ISALNUM (*suffix); suffix++)
291
        {
292
          if (*suffix == 'e' || *suffix == 'E')
293
            flt = 1;
294
        }
295
 
296
      if (suffix == input_line_pointer)
297
        {
298
          radix = 10;
299
          suffix = NULL;
300
        }
301
      else
302
        {
303
          c = *--suffix;
304
          c = TOUPPER (c);
305
          /* If we have both NUMBERS_WITH_SUFFIX and LOCAL_LABELS_FB,
306
             we distinguish between 'B' and 'b'.  This is the case for
307
             Z80.  */
308
          if ((NUMBERS_WITH_SUFFIX && LOCAL_LABELS_FB ? *suffix : c) == 'B')
309
            radix = 2;
310
          else if (c == 'D')
311
            radix = 10;
312
          else if (c == 'O' || c == 'Q')
313
            radix = 8;
314
          else if (c == 'H')
315
            radix = 16;
316
          else if (suffix[1] == '.' || c == 'E' || flt)
317
            {
318
              floating_constant (expressionP);
319
              return;
320
            }
321
          else
322
            {
323
              radix = 10;
324
              suffix = NULL;
325
            }
326
        }
327
    }
328
 
329
  switch (radix)
330
    {
331
    case 2:
332
      maxdig = 2;
333
      too_many_digits = valuesize + 1;
334
      break;
335
    case 8:
336
      maxdig = radix = 8;
337
      too_many_digits = (valuesize + 2) / 3 + 1;
338
      break;
339
    case 16:
340
      maxdig = radix = 16;
341
      too_many_digits = (valuesize + 3) / 4 + 1;
342
      break;
343
    case 10:
344
      maxdig = radix = 10;
345
      too_many_digits = (valuesize + 11) / 4; /* Very rough.  */
346
    }
347
#undef valuesize
348
  start = input_line_pointer;
349
  c = *input_line_pointer++;
350
  for (number = 0;
351
       (digit = hex_value (c)) < maxdig;
352
       c = *input_line_pointer++)
353
    {
354
      number = number * radix + digit;
355
    }
356
  /* c contains character after number.  */
357
  /* input_line_pointer->char after c.  */
358
  small = (input_line_pointer - start - 1) < too_many_digits;
359
 
360
  if (radix == 16 && c == '_')
361
    {
362
      /* This is literal of the form 0x333_0_12345678_1.
363
         This example is equivalent to 0x00000333000000001234567800000001.  */
364
 
365
      int num_little_digits = 0;
366
      int i;
367
      input_line_pointer = start;       /* -> 1st digit.  */
368
 
369
      know (LITTLENUM_NUMBER_OF_BITS == 16);
370
 
371
      for (c = '_'; c == '_'; num_little_digits += 2)
372
        {
373
 
374
          /* Convert one 64-bit word.  */
375
          int ndigit = 0;
376
          number = 0;
377
          for (c = *input_line_pointer++;
378
               (digit = hex_value (c)) < maxdig;
379
               c = *(input_line_pointer++))
380
            {
381
              number = number * radix + digit;
382
              ndigit++;
383
            }
384
 
385
          /* Check for 8 digit per word max.  */
386
          if (ndigit > 8)
387
            as_bad (_("a bignum with underscores may not have more than 8 hex digits in any word"));
388
 
389
          /* Add this chunk to the bignum.
390
             Shift things down 2 little digits.  */
391
          know (LITTLENUM_NUMBER_OF_BITS == 16);
392
          for (i = min (num_little_digits + 1, SIZE_OF_LARGE_NUMBER - 1);
393
               i >= 2;
394
               i--)
395
            generic_bignum[i] = generic_bignum[i - 2];
396
 
397
          /* Add the new digits as the least significant new ones.  */
398
          generic_bignum[0] = number & 0xffffffff;
399
          generic_bignum[1] = number >> 16;
400
        }
401
 
402
      /* Again, c is char after number, input_line_pointer->after c.  */
403
 
404
      if (num_little_digits > SIZE_OF_LARGE_NUMBER - 1)
405
        num_little_digits = SIZE_OF_LARGE_NUMBER - 1;
406
 
407
      assert (num_little_digits >= 4);
408
 
409
      if (num_little_digits != 8)
410
        as_bad (_("a bignum with underscores must have exactly 4 words"));
411
 
412
      /* We might have some leading zeros.  These can be trimmed to give
413
         us a change to fit this constant into a small number.  */
414
      while (generic_bignum[num_little_digits - 1] == 0
415
             && num_little_digits > 1)
416
        num_little_digits--;
417
 
418
      if (num_little_digits <= 2)
419
        {
420
          /* will fit into 32 bits.  */
421
          number = generic_bignum_to_int32 ();
422
          small = 1;
423
        }
424
#ifdef BFD64
425
      else if (num_little_digits <= 4)
426
        {
427
          /* Will fit into 64 bits.  */
428
          number = generic_bignum_to_int64 ();
429
          small = 1;
430
        }
431
#endif
432
      else
433
        {
434
          small = 0;
435
 
436
          /* Number of littlenums in the bignum.  */
437
          number = num_little_digits;
438
        }
439
    }
440
  else if (!small)
441
    {
442
      /* We saw a lot of digits. manufacture a bignum the hard way.  */
443
      LITTLENUM_TYPE *leader;   /* -> high order littlenum of the bignum.  */
444
      LITTLENUM_TYPE *pointer;  /* -> littlenum we are frobbing now.  */
445
      long carry;
446
 
447
      leader = generic_bignum;
448
      generic_bignum[0] = 0;
449
      generic_bignum[1] = 0;
450
      generic_bignum[2] = 0;
451
      generic_bignum[3] = 0;
452
      input_line_pointer = start;       /* -> 1st digit.  */
453
      c = *input_line_pointer++;
454
      for (; (carry = hex_value (c)) < maxdig; c = *input_line_pointer++)
455
        {
456
          for (pointer = generic_bignum; pointer <= leader; pointer++)
457
            {
458
              long work;
459
 
460
              work = carry + radix * *pointer;
461
              *pointer = work & LITTLENUM_MASK;
462
              carry = work >> LITTLENUM_NUMBER_OF_BITS;
463
            }
464
          if (carry)
465
            {
466
              if (leader < generic_bignum + SIZE_OF_LARGE_NUMBER - 1)
467
                {
468
                  /* Room to grow a longer bignum.  */
469
                  *++leader = carry;
470
                }
471
            }
472
        }
473
      /* Again, c is char after number.  */
474
      /* input_line_pointer -> after c.  */
475
      know (LITTLENUM_NUMBER_OF_BITS == 16);
476
      if (leader < generic_bignum + 2)
477
        {
478
          /* Will fit into 32 bits.  */
479
          number = generic_bignum_to_int32 ();
480
          small = 1;
481
        }
482
#ifdef BFD64
483
      else if (leader < generic_bignum + 4)
484
        {
485
          /* Will fit into 64 bits.  */
486
          number = generic_bignum_to_int64 ();
487
          small = 1;
488
        }
489
#endif
490
      else
491
        {
492
          /* Number of littlenums in the bignum.  */
493
          number = leader - generic_bignum + 1;
494
        }
495
    }
496
 
497
  if ((NUMBERS_WITH_SUFFIX || flag_m68k_mri)
498
      && suffix != NULL
499
      && input_line_pointer - 1 == suffix)
500
    c = *input_line_pointer++;
501
 
502
  if (small)
503
    {
504
      /* Here with number, in correct radix. c is the next char.
505
         Note that unlike un*x, we allow "011f" "0x9f" to both mean
506
         the same as the (conventional) "9f".
507
         This is simply easier than checking for strict canonical
508
         form.  Syntax sux!  */
509
 
510
      if (LOCAL_LABELS_FB && c == 'b')
511
        {
512
          /* Backward ref to local label.
513
             Because it is backward, expect it to be defined.  */
514
          /* Construct a local label.  */
515
          name = fb_label_name ((int) number, 0);
516
 
517
          /* Seen before, or symbol is defined: OK.  */
518
          symbolP = symbol_find (name);
519
          if ((symbolP != NULL) && (S_IS_DEFINED (symbolP)))
520
            {
521
              /* Local labels are never absolute.  Don't waste time
522
                 checking absoluteness.  */
523
              know (SEG_NORMAL (S_GET_SEGMENT (symbolP)));
524
 
525
              expressionP->X_op = O_symbol;
526
              expressionP->X_add_symbol = symbolP;
527
            }
528
          else
529
            {
530
              /* Either not seen or not defined.  */
531
              /* @@ Should print out the original string instead of
532
                 the parsed number.  */
533
              as_bad (_("backward ref to unknown label \"%d:\""),
534
                      (int) number);
535
              expressionP->X_op = O_constant;
536
            }
537
 
538
          expressionP->X_add_number = 0;
539
        }                       /* case 'b' */
540
      else if (LOCAL_LABELS_FB && c == 'f')
541
        {
542
          /* Forward reference.  Expect symbol to be undefined or
543
             unknown.  undefined: seen it before.  unknown: never seen
544
             it before.
545
 
546
             Construct a local label name, then an undefined symbol.
547
             Don't create a xseg frag for it: caller may do that.
548
             Just return it as never seen before.  */
549
          name = fb_label_name ((int) number, 1);
550
          symbolP = symbol_find_or_make (name);
551
          /* We have no need to check symbol properties.  */
552
#ifndef many_segments
553
          /* Since "know" puts its arg into a "string", we
554
             can't have newlines in the argument.  */
555
          know (S_GET_SEGMENT (symbolP) == undefined_section || S_GET_SEGMENT (symbolP) == text_section || S_GET_SEGMENT (symbolP) == data_section);
556
#endif
557
          expressionP->X_op = O_symbol;
558
          expressionP->X_add_symbol = symbolP;
559
          expressionP->X_add_number = 0;
560
        }                       /* case 'f' */
561
      else if (LOCAL_LABELS_DOLLAR && c == '$')
562
        {
563
          /* If the dollar label is *currently* defined, then this is just
564
             another reference to it.  If it is not *currently* defined,
565
             then this is a fresh instantiation of that number, so create
566
             it.  */
567
 
568
          if (dollar_label_defined ((long) number))
569
            {
570
              name = dollar_label_name ((long) number, 0);
571
              symbolP = symbol_find (name);
572
              know (symbolP != NULL);
573
            }
574
          else
575
            {
576
              name = dollar_label_name ((long) number, 1);
577
              symbolP = symbol_find_or_make (name);
578
            }
579
 
580
          expressionP->X_op = O_symbol;
581
          expressionP->X_add_symbol = symbolP;
582
          expressionP->X_add_number = 0;
583
        }                       /* case '$' */
584
      else
585
        {
586
          expressionP->X_op = O_constant;
587
          expressionP->X_add_number = number;
588
          input_line_pointer--; /* Restore following character.  */
589
        }                       /* Really just a number.  */
590
    }
591
  else
592
    {
593
      /* Not a small number.  */
594
      expressionP->X_op = O_big;
595
      expressionP->X_add_number = number;       /* Number of littlenums.  */
596
      input_line_pointer--;     /* -> char following number.  */
597
    }
598
}
599
 
600
/* Parse an MRI multi character constant.  */
601
 
602
static void
603
mri_char_constant (expressionS *expressionP)
604
{
605
  int i;
606
 
607
  if (*input_line_pointer == '\''
608
      && input_line_pointer[1] != '\'')
609
    {
610
      expressionP->X_op = O_constant;
611
      expressionP->X_add_number = 0;
612
      return;
613
    }
614
 
615
  /* In order to get the correct byte ordering, we must build the
616
     number in reverse.  */
617
  for (i = SIZE_OF_LARGE_NUMBER - 1; i >= 0; i--)
618
    {
619
      int j;
620
 
621
      generic_bignum[i] = 0;
622
      for (j = 0; j < CHARS_PER_LITTLENUM; j++)
623
        {
624
          if (*input_line_pointer == '\'')
625
            {
626
              if (input_line_pointer[1] != '\'')
627
                break;
628
              ++input_line_pointer;
629
            }
630
          generic_bignum[i] <<= 8;
631
          generic_bignum[i] += *input_line_pointer;
632
          ++input_line_pointer;
633
        }
634
 
635
      if (i < SIZE_OF_LARGE_NUMBER - 1)
636
        {
637
          /* If there is more than one littlenum, left justify the
638
             last one to make it match the earlier ones.  If there is
639
             only one, we can just use the value directly.  */
640
          for (; j < CHARS_PER_LITTLENUM; j++)
641
            generic_bignum[i] <<= 8;
642
        }
643
 
644
      if (*input_line_pointer == '\''
645
          && input_line_pointer[1] != '\'')
646
        break;
647
    }
648
 
649
  if (i < 0)
650
    {
651
      as_bad (_("character constant too large"));
652
      i = 0;
653
    }
654
 
655
  if (i > 0)
656
    {
657
      int c;
658
      int j;
659
 
660
      c = SIZE_OF_LARGE_NUMBER - i;
661
      for (j = 0; j < c; j++)
662
        generic_bignum[j] = generic_bignum[i + j];
663
      i = c;
664
    }
665
 
666
  know (LITTLENUM_NUMBER_OF_BITS == 16);
667
  if (i > 2)
668
    {
669
      expressionP->X_op = O_big;
670
      expressionP->X_add_number = i;
671
    }
672
  else
673
    {
674
      expressionP->X_op = O_constant;
675
      if (i < 2)
676
        expressionP->X_add_number = generic_bignum[0] & LITTLENUM_MASK;
677
      else
678
        expressionP->X_add_number =
679
          (((generic_bignum[1] & LITTLENUM_MASK)
680
            << LITTLENUM_NUMBER_OF_BITS)
681
           | (generic_bignum[0] & LITTLENUM_MASK));
682
    }
683
 
684
  /* Skip the final closing quote.  */
685
  ++input_line_pointer;
686
}
687
 
688
/* Return an expression representing the current location.  This
689
   handles the magic symbol `.'.  */
690
 
691
static void
692
current_location (expressionS *expressionp)
693
{
694
  if (now_seg == absolute_section)
695
    {
696
      expressionp->X_op = O_constant;
697
      expressionp->X_add_number = abs_section_offset;
698
    }
699
  else
700
    {
701
      expressionp->X_op = O_symbol;
702
      expressionp->X_add_symbol = symbol_temp_new_now ();
703
      expressionp->X_add_number = 0;
704
    }
705
}
706
 
707
/* In:  Input_line_pointer points to 1st char of operand, which may
708
        be a space.
709
 
710
   Out: An expressionS.
711
        The operand may have been empty: in this case X_op == O_absent.
712
        Input_line_pointer->(next non-blank) char after operand.  */
713
 
714
static segT
715
operand (expressionS *expressionP, enum expr_mode mode)
716
{
717
  char c;
718
  symbolS *symbolP;     /* Points to symbol.  */
719
  char *name;           /* Points to name of symbol.  */
720
  segT segment;
721
 
722
  /* All integers are regarded as unsigned unless they are negated.
723
     This is because the only thing which cares whether a number is
724
     unsigned is the code in emit_expr which extends constants into
725
     bignums.  It should only sign extend negative numbers, so that
726
     something like ``.quad 0x80000000'' is not sign extended even
727
     though it appears negative if valueT is 32 bits.  */
728
  expressionP->X_unsigned = 1;
729
 
730
  /* Digits, assume it is a bignum.  */
731
 
732
  SKIP_WHITESPACE ();           /* Leading whitespace is part of operand.  */
733
  c = *input_line_pointer++;    /* input_line_pointer -> past char in c.  */
734
 
735
  if (is_end_of_line[(unsigned char) c])
736
    goto eol;
737
 
738
  switch (c)
739
    {
740
    case '1':
741
    case '2':
742
    case '3':
743
    case '4':
744
    case '5':
745
    case '6':
746
    case '7':
747
    case '8':
748
    case '9':
749
      input_line_pointer--;
750
 
751
      integer_constant ((NUMBERS_WITH_SUFFIX || flag_m68k_mri)
752
                        ? 0 : 10,
753
                        expressionP);
754
      break;
755
 
756
#ifdef LITERAL_PREFIXDOLLAR_HEX
757
    case '$':
758
      /* $L is the start of a local label, not a hex constant.  */
759
      if (* input_line_pointer == 'L')
760
      goto isname;
761
      integer_constant (16, expressionP);
762
      break;
763
#endif
764
 
765
#ifdef LITERAL_PREFIXPERCENT_BIN
766
    case '%':
767
      integer_constant (2, expressionP);
768
      break;
769
#endif
770
 
771
    case '0':
772
      /* Non-decimal radix.  */
773
 
774
      if (NUMBERS_WITH_SUFFIX || flag_m68k_mri)
775
        {
776
          char *s;
777
 
778
          /* Check for a hex or float constant.  */
779
          for (s = input_line_pointer; hex_p (*s); s++)
780
            ;
781
          if (*s == 'h' || *s == 'H' || *input_line_pointer == '.')
782
            {
783
              --input_line_pointer;
784
              integer_constant (0, expressionP);
785
              break;
786
            }
787
        }
788
      c = *input_line_pointer;
789
      switch (c)
790
        {
791
        case 'o':
792
        case 'O':
793
        case 'q':
794
        case 'Q':
795
        case '8':
796
        case '9':
797
          if (NUMBERS_WITH_SUFFIX || flag_m68k_mri)
798
            {
799
              integer_constant (0, expressionP);
800
              break;
801
            }
802
          /* Fall through.  */
803
        default:
804
        default_case:
805
          if (c && strchr (FLT_CHARS, c))
806
            {
807
              input_line_pointer++;
808
              floating_constant (expressionP);
809
              expressionP->X_add_number = - TOLOWER (c);
810
            }
811
          else
812
            {
813
              /* The string was only zero.  */
814
              expressionP->X_op = O_constant;
815
              expressionP->X_add_number = 0;
816
            }
817
 
818
          break;
819
 
820
        case 'x':
821
        case 'X':
822
          if (flag_m68k_mri)
823
            goto default_case;
824
          input_line_pointer++;
825
          integer_constant (16, expressionP);
826
          break;
827
 
828
        case 'b':
829
          if (LOCAL_LABELS_FB && ! (flag_m68k_mri || NUMBERS_WITH_SUFFIX))
830
            {
831
              /* This code used to check for '+' and '-' here, and, in
832
                 some conditions, fall through to call
833
                 integer_constant.  However, that didn't make sense,
834
                 as integer_constant only accepts digits.  */
835
              /* Some of our code elsewhere does permit digits greater
836
                 than the expected base; for consistency, do the same
837
                 here.  */
838
              if (input_line_pointer[1] < '0'
839
                  || input_line_pointer[1] > '9')
840
                {
841
                  /* Parse this as a back reference to label 0.  */
842
                  input_line_pointer--;
843
                  integer_constant (10, expressionP);
844
                  break;
845
                }
846
              /* Otherwise, parse this as a binary number.  */
847
            }
848
          /* Fall through.  */
849
        case 'B':
850
          input_line_pointer++;
851
          if (flag_m68k_mri || NUMBERS_WITH_SUFFIX)
852
            goto default_case;
853
          integer_constant (2, expressionP);
854
          break;
855
 
856
        case '0':
857
        case '1':
858
        case '2':
859
        case '3':
860
        case '4':
861
        case '5':
862
        case '6':
863
        case '7':
864
          integer_constant ((flag_m68k_mri || NUMBERS_WITH_SUFFIX)
865
                            ? 0 : 8,
866
                            expressionP);
867
          break;
868
 
869
        case 'f':
870
          if (LOCAL_LABELS_FB)
871
            {
872
              /* If it says "0f" and it could possibly be a floating point
873
                 number, make it one.  Otherwise, make it a local label,
874
                 and try to deal with parsing the rest later.  */
875
              if (!input_line_pointer[1]
876
                  || (is_end_of_line[0xff & input_line_pointer[1]])
877
                  || strchr (FLT_CHARS, 'f') == NULL)
878
                goto is_0f_label;
879
              {
880
                char *cp = input_line_pointer + 1;
881
                int r = atof_generic (&cp, ".", EXP_CHARS,
882
                                      &generic_floating_point_number);
883
                switch (r)
884
                  {
885
                  case 0:
886
                  case ERROR_EXPONENT_OVERFLOW:
887
                    if (*cp == 'f' || *cp == 'b')
888
                      /* Looks like a difference expression.  */
889
                      goto is_0f_label;
890
                    else if (cp == input_line_pointer + 1)
891
                      /* No characters has been accepted -- looks like
892
                         end of operand.  */
893
                      goto is_0f_label;
894
                    else
895
                      goto is_0f_float;
896
                  default:
897
                    as_fatal (_("expr.c(operand): bad atof_generic return val %d"),
898
                              r);
899
                  }
900
              }
901
 
902
              /* Okay, now we've sorted it out.  We resume at one of these
903
                 two labels, depending on what we've decided we're probably
904
                 looking at.  */
905
            is_0f_label:
906
              input_line_pointer--;
907
              integer_constant (10, expressionP);
908
              break;
909
 
910
            is_0f_float:
911
              /* Fall through.  */
912
              ;
913
            }
914
 
915
        case 'd':
916
        case 'D':
917
          if (flag_m68k_mri || NUMBERS_WITH_SUFFIX)
918
            {
919
              integer_constant (0, expressionP);
920
              break;
921
            }
922
          /* Fall through.  */
923
        case 'F':
924
        case 'r':
925
        case 'e':
926
        case 'E':
927
        case 'g':
928
        case 'G':
929
          input_line_pointer++;
930
          floating_constant (expressionP);
931
          expressionP->X_add_number = - TOLOWER (c);
932
          break;
933
 
934
        case '$':
935
          if (LOCAL_LABELS_DOLLAR)
936
            {
937
              integer_constant (10, expressionP);
938
              break;
939
            }
940
          else
941
            goto default_case;
942
        }
943
 
944
      break;
945
 
946
    case '(':
947
#ifndef NEED_INDEX_OPERATOR
948
    case '[':
949
#endif
950
      /* Didn't begin with digit & not a name.  */
951
      if (mode != expr_defer)
952
        segment = expression (expressionP);
953
      else
954
        segment = deferred_expression (expressionP);
955
      /* expression () will pass trailing whitespace.  */
956
      if ((c == '(' && *input_line_pointer != ')')
957
          || (c == '[' && *input_line_pointer != ']'))
958
        as_bad (_("missing '%c'"), c == '(' ? ')' : ']');
959
      else
960
        input_line_pointer++;
961
      SKIP_WHITESPACE ();
962
      /* Here with input_line_pointer -> char after "(...)".  */
963
      return segment;
964
 
965
#ifdef TC_M68K
966
    case 'E':
967
      if (! flag_m68k_mri || *input_line_pointer != '\'')
968
        goto de_fault;
969
      as_bad (_("EBCDIC constants are not supported"));
970
      /* Fall through.  */
971
    case 'A':
972
      if (! flag_m68k_mri || *input_line_pointer != '\'')
973
        goto de_fault;
974
      ++input_line_pointer;
975
      /* Fall through.  */
976
#endif
977
    case '\'':
978
      if (! flag_m68k_mri)
979
        {
980
          /* Warning: to conform to other people's assemblers NO
981
             ESCAPEMENT is permitted for a single quote.  The next
982
             character, parity errors and all, is taken as the value
983
             of the operand.  VERY KINKY.  */
984
          expressionP->X_op = O_constant;
985
          expressionP->X_add_number = *input_line_pointer++;
986
          break;
987
        }
988
 
989
      mri_char_constant (expressionP);
990
      break;
991
 
992
#ifdef TC_M68K
993
    case '"':
994
      /* Double quote is the bitwise not operator in MRI mode.  */
995
      if (! flag_m68k_mri)
996
        goto de_fault;
997
      /* Fall through.  */
998
#endif
999
    case '~':
1000
      /* '~' is permitted to start a label on the Delta.  */
1001
      if (is_name_beginner (c))
1002
        goto isname;
1003
    case '!':
1004
    case '-':
1005
    case '+':
1006
      {
1007
        operand (expressionP, mode);
1008
        if (expressionP->X_op == O_constant)
1009
          {
1010
            /* input_line_pointer -> char after operand.  */
1011
            if (c == '-')
1012
              {
1013
                expressionP->X_add_number = - expressionP->X_add_number;
1014
                /* Notice: '-' may overflow: no warning is given.
1015
                   This is compatible with other people's
1016
                   assemblers.  Sigh.  */
1017
                expressionP->X_unsigned = 0;
1018
              }
1019
            else if (c == '~' || c == '"')
1020
              expressionP->X_add_number = ~ expressionP->X_add_number;
1021
            else if (c == '!')
1022
              expressionP->X_add_number = ! expressionP->X_add_number;
1023
          }
1024
        else if (expressionP->X_op == O_big
1025
                 && expressionP->X_add_number <= 0
1026
                 && c == '-'
1027
                 && (generic_floating_point_number.sign == '+'
1028
                     || generic_floating_point_number.sign == 'P'))
1029
          {
1030
            /* Negative flonum (eg, -1.000e0).  */
1031
            if (generic_floating_point_number.sign == '+')
1032
              generic_floating_point_number.sign = '-';
1033
            else
1034
              generic_floating_point_number.sign = 'N';
1035
          }
1036
        else if (expressionP->X_op == O_big
1037
                 && expressionP->X_add_number > 0)
1038
          {
1039
            int i;
1040
 
1041
            if (c == '~' || c == '-')
1042
              {
1043
                for (i = 0; i < expressionP->X_add_number; ++i)
1044
                  generic_bignum[i] = ~generic_bignum[i];
1045
                if (c == '-')
1046
                  for (i = 0; i < expressionP->X_add_number; ++i)
1047
                    {
1048
                      generic_bignum[i] += 1;
1049
                      if (generic_bignum[i])
1050
                        break;
1051
                    }
1052
              }
1053
            else if (c == '!')
1054
              {
1055
                int nonzero = 0;
1056
                for (i = 0; i < expressionP->X_add_number; ++i)
1057
                  {
1058
                    if (generic_bignum[i])
1059
                      nonzero = 1;
1060
                    generic_bignum[i] = 0;
1061
                  }
1062
                generic_bignum[0] = nonzero;
1063
              }
1064
          }
1065
        else if (expressionP->X_op != O_illegal
1066
                 && expressionP->X_op != O_absent)
1067
          {
1068
            if (c != '+')
1069
              {
1070
                expressionP->X_add_symbol = make_expr_symbol (expressionP);
1071
                if (c == '-')
1072
                  expressionP->X_op = O_uminus;
1073
                else if (c == '~' || c == '"')
1074
                  expressionP->X_op = O_bit_not;
1075
                else
1076
                  expressionP->X_op = O_logical_not;
1077
                expressionP->X_add_number = 0;
1078
              }
1079
          }
1080
        else
1081
          as_warn (_("Unary operator %c ignored because bad operand follows"),
1082
                   c);
1083
      }
1084
      break;
1085
 
1086
#if defined (DOLLAR_DOT) || defined (TC_M68K)
1087
    case '$':
1088
      /* '$' is the program counter when in MRI mode, or when
1089
         DOLLAR_DOT is defined.  */
1090
#ifndef DOLLAR_DOT
1091
      if (! flag_m68k_mri)
1092
        goto de_fault;
1093
#endif
1094
      if (DOLLAR_AMBIGU && hex_p (*input_line_pointer))
1095
        {
1096
          /* In MRI mode and on Z80, '$' is also used as the prefix
1097
             for a hexadecimal constant.  */
1098
          integer_constant (16, expressionP);
1099
          break;
1100
        }
1101
 
1102
      if (is_part_of_name (*input_line_pointer))
1103
        goto isname;
1104
 
1105
      current_location (expressionP);
1106
      break;
1107
#endif
1108
 
1109
    case '.':
1110
      if (!is_part_of_name (*input_line_pointer))
1111
        {
1112
          current_location (expressionP);
1113
          break;
1114
        }
1115
      else if ((strncasecmp (input_line_pointer, "startof.", 8) == 0
1116
                && ! is_part_of_name (input_line_pointer[8]))
1117
               || (strncasecmp (input_line_pointer, "sizeof.", 7) == 0
1118
                   && ! is_part_of_name (input_line_pointer[7])))
1119
        {
1120
          int start;
1121
 
1122
          start = (input_line_pointer[1] == 't'
1123
                   || input_line_pointer[1] == 'T');
1124
          input_line_pointer += start ? 8 : 7;
1125
          SKIP_WHITESPACE ();
1126
          if (*input_line_pointer != '(')
1127
            as_bad (_("syntax error in .startof. or .sizeof."));
1128
          else
1129
            {
1130
              char *buf;
1131
 
1132
              ++input_line_pointer;
1133
              SKIP_WHITESPACE ();
1134
              name = input_line_pointer;
1135
              c = get_symbol_end ();
1136
 
1137
              buf = (char *) xmalloc (strlen (name) + 10);
1138
              if (start)
1139
                sprintf (buf, ".startof.%s", name);
1140
              else
1141
                sprintf (buf, ".sizeof.%s", name);
1142
              symbolP = symbol_make (buf);
1143
              free (buf);
1144
 
1145
              expressionP->X_op = O_symbol;
1146
              expressionP->X_add_symbol = symbolP;
1147
              expressionP->X_add_number = 0;
1148
 
1149
              *input_line_pointer = c;
1150
              SKIP_WHITESPACE ();
1151
              if (*input_line_pointer != ')')
1152
                as_bad (_("syntax error in .startof. or .sizeof."));
1153
              else
1154
                ++input_line_pointer;
1155
            }
1156
          break;
1157
        }
1158
      else
1159
        {
1160
          goto isname;
1161
        }
1162
 
1163
    case ',':
1164
    eol:
1165
      /* Can't imagine any other kind of operand.  */
1166
      expressionP->X_op = O_absent;
1167
      input_line_pointer--;
1168
      break;
1169
 
1170
#ifdef TC_M68K
1171
    case '%':
1172
      if (! flag_m68k_mri)
1173
        goto de_fault;
1174
      integer_constant (2, expressionP);
1175
      break;
1176
 
1177
    case '@':
1178
      if (! flag_m68k_mri)
1179
        goto de_fault;
1180
      integer_constant (8, expressionP);
1181
      break;
1182
 
1183
    case ':':
1184
      if (! flag_m68k_mri)
1185
        goto de_fault;
1186
 
1187
      /* In MRI mode, this is a floating point constant represented
1188
         using hexadecimal digits.  */
1189
 
1190
      ++input_line_pointer;
1191
      integer_constant (16, expressionP);
1192
      break;
1193
 
1194
    case '*':
1195
      if (! flag_m68k_mri || is_part_of_name (*input_line_pointer))
1196
        goto de_fault;
1197
 
1198
      current_location (expressionP);
1199
      break;
1200
#endif
1201
 
1202
    default:
1203
#ifdef TC_M68K
1204
    de_fault:
1205
#endif
1206
      if (is_name_beginner (c)) /* Here if did not begin with a digit.  */
1207
        {
1208
          /* Identifier begins here.
1209
             This is kludged for speed, so code is repeated.  */
1210
        isname:
1211
          name = --input_line_pointer;
1212
          c = get_symbol_end ();
1213
 
1214
#ifdef md_parse_name
1215
          /* This is a hook for the backend to parse certain names
1216
             specially in certain contexts.  If a name always has a
1217
             specific value, it can often be handled by simply
1218
             entering it in the symbol table.  */
1219
          if (md_parse_name (name, expressionP, mode, &c))
1220
            {
1221
              *input_line_pointer = c;
1222
              break;
1223
            }
1224
#endif
1225
 
1226
#ifdef TC_I960
1227
          /* The MRI i960 assembler permits
1228
                 lda sizeof code,g13
1229
             FIXME: This should use md_parse_name.  */
1230
          if (flag_mri
1231
              && (strcasecmp (name, "sizeof") == 0
1232
                  || strcasecmp (name, "startof") == 0))
1233
            {
1234
              int start;
1235
              char *buf;
1236
 
1237
              start = (name[1] == 't'
1238
                       || name[1] == 'T');
1239
 
1240
              *input_line_pointer = c;
1241
              SKIP_WHITESPACE ();
1242
 
1243
              name = input_line_pointer;
1244
              c = get_symbol_end ();
1245
 
1246
              buf = (char *) xmalloc (strlen (name) + 10);
1247
              if (start)
1248
                sprintf (buf, ".startof.%s", name);
1249
              else
1250
                sprintf (buf, ".sizeof.%s", name);
1251
              symbolP = symbol_make (buf);
1252
              free (buf);
1253
 
1254
              expressionP->X_op = O_symbol;
1255
              expressionP->X_add_symbol = symbolP;
1256
              expressionP->X_add_number = 0;
1257
 
1258
              *input_line_pointer = c;
1259
              SKIP_WHITESPACE ();
1260
 
1261
              break;
1262
            }
1263
#endif
1264
 
1265
          symbolP = symbol_find_or_make (name);
1266
 
1267
          /* If we have an absolute symbol or a reg, then we know its
1268
             value now.  */
1269
          segment = S_GET_SEGMENT (symbolP);
1270
          if (mode != expr_defer && segment == absolute_section)
1271
            {
1272
              expressionP->X_op = O_constant;
1273
              expressionP->X_add_number = S_GET_VALUE (symbolP);
1274
            }
1275
          else if (mode != expr_defer && segment == reg_section)
1276
            {
1277
              expressionP->X_op = O_register;
1278
              expressionP->X_add_number = S_GET_VALUE (symbolP);
1279
            }
1280
          else
1281
            {
1282
              expressionP->X_op = O_symbol;
1283
              expressionP->X_add_symbol = symbolP;
1284
              expressionP->X_add_number = 0;
1285
            }
1286
          *input_line_pointer = c;
1287
        }
1288
      else
1289
        {
1290
          /* Let the target try to parse it.  Success is indicated by changing
1291
             the X_op field to something other than O_absent and pointing
1292
             input_line_pointer past the expression.  If it can't parse the
1293
             expression, X_op and input_line_pointer should be unchanged.  */
1294
          expressionP->X_op = O_absent;
1295
          --input_line_pointer;
1296
          md_operand (expressionP);
1297
          if (expressionP->X_op == O_absent)
1298
            {
1299
              ++input_line_pointer;
1300
              as_bad (_("bad expression"));
1301
              expressionP->X_op = O_constant;
1302
              expressionP->X_add_number = 0;
1303
            }
1304
        }
1305
      break;
1306
    }
1307
 
1308
  /* It is more 'efficient' to clean up the expressionS when they are
1309
     created.  Doing it here saves lines of code.  */
1310
  clean_up_expression (expressionP);
1311
  SKIP_WHITESPACE ();           /* -> 1st char after operand.  */
1312
  know (*input_line_pointer != ' ');
1313
 
1314
  /* The PA port needs this information.  */
1315
  if (expressionP->X_add_symbol)
1316
    symbol_mark_used (expressionP->X_add_symbol);
1317
 
1318
  expressionP->X_add_symbol = symbol_clone_if_forward_ref (expressionP->X_add_symbol);
1319
  expressionP->X_op_symbol = symbol_clone_if_forward_ref (expressionP->X_op_symbol);
1320
 
1321
  switch (expressionP->X_op)
1322
    {
1323
    default:
1324
      return absolute_section;
1325
    case O_symbol:
1326
      return S_GET_SEGMENT (expressionP->X_add_symbol);
1327
    case O_register:
1328
      return reg_section;
1329
    }
1330
}
1331
 
1332
/* Internal.  Simplify a struct expression for use by expr ().  */
1333
 
1334
/* In:  address of an expressionS.
1335
        The X_op field of the expressionS may only take certain values.
1336
        Elsewise we waste time special-case testing. Sigh. Ditto SEG_ABSENT.
1337
 
1338
   Out: expressionS may have been modified:
1339
        Unused fields zeroed to help expr ().  */
1340
 
1341
static void
1342
clean_up_expression (expressionS *expressionP)
1343
{
1344
  switch (expressionP->X_op)
1345
    {
1346
    case O_illegal:
1347
    case O_absent:
1348
      expressionP->X_add_number = 0;
1349
      /* Fall through.  */
1350
    case O_big:
1351
    case O_constant:
1352
    case O_register:
1353
      expressionP->X_add_symbol = NULL;
1354
      /* Fall through.  */
1355
    case O_symbol:
1356
    case O_uminus:
1357
    case O_bit_not:
1358
      expressionP->X_op_symbol = NULL;
1359
      break;
1360
    default:
1361
      break;
1362
    }
1363
}
1364
 
1365
/* Expression parser.  */
1366
 
1367
/* We allow an empty expression, and just assume (absolute,0) silently.
1368
   Unary operators and parenthetical expressions are treated as operands.
1369
   As usual, Q==quantity==operand, O==operator, X==expression mnemonics.
1370
 
1371
   We used to do an aho/ullman shift-reduce parser, but the logic got so
1372
   warped that I flushed it and wrote a recursive-descent parser instead.
1373
   Now things are stable, would anybody like to write a fast parser?
1374
   Most expressions are either register (which does not even reach here)
1375
   or 1 symbol. Then "symbol+constant" and "symbol-symbol" are common.
1376
   So I guess it doesn't really matter how inefficient more complex expressions
1377
   are parsed.
1378
 
1379
   After expr(RANK,resultP) input_line_pointer->operator of rank <= RANK.
1380
   Also, we have consumed any leading or trailing spaces (operand does that)
1381
   and done all intervening operators.
1382
 
1383
   This returns the segment of the result, which will be
1384
   absolute_section or the segment of a symbol.  */
1385
 
1386
#undef __
1387
#define __ O_illegal
1388
#ifndef O_SINGLE_EQ
1389
#define O_SINGLE_EQ O_illegal
1390
#endif
1391
 
1392
/* Maps ASCII -> operators.  */
1393
static const operatorT op_encoding[256] = {
1394
  __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1395
  __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1396
 
1397
  __, O_bit_or_not, __, __, __, O_modulus, O_bit_and, __,
1398
  __, __, O_multiply, O_add, __, O_subtract, __, O_divide,
1399
  __, __, __, __, __, __, __, __,
1400
  __, __, __, __, O_lt, O_SINGLE_EQ, O_gt, __,
1401
  __, __, __, __, __, __, __, __,
1402
  __, __, __, __, __, __, __, __,
1403
  __, __, __, __, __, __, __, __,
1404
  __, __, __,
1405
#ifdef NEED_INDEX_OPERATOR
1406
  O_index,
1407
#else
1408
  __,
1409
#endif
1410
  __, __, O_bit_exclusive_or, __,
1411
  __, __, __, __, __, __, __, __,
1412
  __, __, __, __, __, __, __, __,
1413
  __, __, __, __, __, __, __, __,
1414
  __, __, __, __, O_bit_inclusive_or, __, __, __,
1415
 
1416
  __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1417
  __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1418
  __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1419
  __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1420
  __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1421
  __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1422
  __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1423
  __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __
1424
};
1425
 
1426
/* Rank Examples
1427
 
1428
   1    ||
1429
   2    &&
1430
   3    == <> < <= >= >
1431
   4    + -
1432
   5    used for * / % in MRI mode
1433
   6    & ^ ! |
1434
   7    * / % << >>
1435
   8    unary - unary ~
1436
*/
1437
static operator_rankT op_rank[] = {
1438
  0,     /* O_illegal */
1439
  0,     /* O_absent */
1440
  0,     /* O_constant */
1441
  0,     /* O_symbol */
1442
  0,     /* O_symbol_rva */
1443
  0,     /* O_register */
1444
  0,     /* O_big */
1445
  9,    /* O_uminus */
1446
  9,    /* O_bit_not */
1447
  9,    /* O_logical_not */
1448
  8,    /* O_multiply */
1449
  8,    /* O_divide */
1450
  8,    /* O_modulus */
1451
  8,    /* O_left_shift */
1452
  8,    /* O_right_shift */
1453
  7,    /* O_bit_inclusive_or */
1454
  7,    /* O_bit_or_not */
1455
  7,    /* O_bit_exclusive_or */
1456
  7,    /* O_bit_and */
1457
  5,    /* O_add */
1458
  5,    /* O_subtract */
1459
  4,    /* O_eq */
1460
  4,    /* O_ne */
1461
  4,    /* O_lt */
1462
  4,    /* O_le */
1463
  4,    /* O_ge */
1464
  4,    /* O_gt */
1465
  3,    /* O_logical_and */
1466
  2,    /* O_logical_or */
1467
  1,    /* O_index */
1468
  0,     /* O_md1 */
1469
  0,     /* O_md2 */
1470
  0,     /* O_md3 */
1471
  0,     /* O_md4 */
1472
  0,     /* O_md5 */
1473
  0,     /* O_md6 */
1474
  0,     /* O_md7 */
1475
  0,     /* O_md8 */
1476
  0,     /* O_md9 */
1477
  0,     /* O_md10 */
1478
  0,     /* O_md11 */
1479
  0,     /* O_md12 */
1480
  0,     /* O_md13 */
1481
  0,     /* O_md14 */
1482
  0,     /* O_md15 */
1483
  0,     /* O_md16 */
1484
};
1485
 
1486
/* Unfortunately, in MRI mode for the m68k, multiplication and
1487
   division have lower precedence than the bit wise operators.  This
1488
   function sets the operator precedences correctly for the current
1489
   mode.  Also, MRI uses a different bit_not operator, and this fixes
1490
   that as well.  */
1491
 
1492
#define STANDARD_MUL_PRECEDENCE 8
1493
#define MRI_MUL_PRECEDENCE 6
1494
 
1495
void
1496
expr_set_precedence (void)
1497
{
1498
  if (flag_m68k_mri)
1499
    {
1500
      op_rank[O_multiply] = MRI_MUL_PRECEDENCE;
1501
      op_rank[O_divide] = MRI_MUL_PRECEDENCE;
1502
      op_rank[O_modulus] = MRI_MUL_PRECEDENCE;
1503
    }
1504
  else
1505
    {
1506
      op_rank[O_multiply] = STANDARD_MUL_PRECEDENCE;
1507
      op_rank[O_divide] = STANDARD_MUL_PRECEDENCE;
1508
      op_rank[O_modulus] = STANDARD_MUL_PRECEDENCE;
1509
    }
1510
}
1511
 
1512
/* Initialize the expression parser.  */
1513
 
1514
void
1515
expr_begin (void)
1516
{
1517
  expr_set_precedence ();
1518
 
1519
  /* Verify that X_op field is wide enough.  */
1520
  {
1521
    expressionS e;
1522
    e.X_op = O_max;
1523
    assert (e.X_op == O_max);
1524
  }
1525
}
1526
 
1527
/* Return the encoding for the operator at INPUT_LINE_POINTER, and
1528
   sets NUM_CHARS to the number of characters in the operator.
1529
   Does not advance INPUT_LINE_POINTER.  */
1530
 
1531
static inline operatorT
1532
operator (int *num_chars)
1533
{
1534
  int c;
1535
  operatorT ret;
1536
 
1537
  c = *input_line_pointer & 0xff;
1538
  *num_chars = 1;
1539
 
1540
  if (is_end_of_line[c])
1541
    return O_illegal;
1542
 
1543
  switch (c)
1544
    {
1545
    default:
1546
      return op_encoding[c];
1547
 
1548
    case '+':
1549
    case '-':
1550
      return op_encoding[c];
1551
 
1552
    case '<':
1553
      switch (input_line_pointer[1])
1554
        {
1555
        default:
1556
          return op_encoding[c];
1557
        case '<':
1558
          ret = O_left_shift;
1559
          break;
1560
        case '>':
1561
          ret = O_ne;
1562
          break;
1563
        case '=':
1564
          ret = O_le;
1565
          break;
1566
        }
1567
      *num_chars = 2;
1568
      return ret;
1569
 
1570
    case '=':
1571
      if (input_line_pointer[1] != '=')
1572
        return op_encoding[c];
1573
 
1574
      *num_chars = 2;
1575
      return O_eq;
1576
 
1577
    case '>':
1578
      switch (input_line_pointer[1])
1579
        {
1580
        default:
1581
          return op_encoding[c];
1582
        case '>':
1583
          ret = O_right_shift;
1584
          break;
1585
        case '=':
1586
          ret = O_ge;
1587
          break;
1588
        }
1589
      *num_chars = 2;
1590
      return ret;
1591
 
1592
    case '!':
1593
      switch (input_line_pointer[1])
1594
        {
1595
        case '!':
1596
          /* We accept !! as equivalent to ^ for MRI compatibility. */
1597
          *num_chars = 2;
1598
          return O_bit_exclusive_or;
1599
        case '=':
1600
          /* We accept != as equivalent to <>.  */
1601
          *num_chars = 2;
1602
          return O_ne;
1603
        default:
1604
          if (flag_m68k_mri)
1605
            return O_bit_inclusive_or;
1606
          return op_encoding[c];
1607
        }
1608
 
1609
    case '|':
1610
      if (input_line_pointer[1] != '|')
1611
        return op_encoding[c];
1612
 
1613
      *num_chars = 2;
1614
      return O_logical_or;
1615
 
1616
    case '&':
1617
      if (input_line_pointer[1] != '&')
1618
        return op_encoding[c];
1619
 
1620
      *num_chars = 2;
1621
      return O_logical_and;
1622
    }
1623
 
1624
  /* NOTREACHED  */
1625
}
1626
 
1627
/* Parse an expression.  */
1628
 
1629
segT
1630
expr (int rankarg,              /* Larger # is higher rank.  */
1631
      expressionS *resultP,     /* Deliver result here.  */
1632
      enum expr_mode mode       /* Controls behavior.  */)
1633
{
1634
  operator_rankT rank = (operator_rankT) rankarg;
1635
  segT retval;
1636
  expressionS right;
1637
  operatorT op_left;
1638
  operatorT op_right;
1639
  int op_chars;
1640
 
1641
  know (rankarg >= 0);
1642
 
1643
  /* Save the value of dot for the fixup code.  */
1644
  if (rank == 0)
1645
    dot_value = frag_now_fix ();
1646
 
1647
  retval = operand (resultP, mode);
1648
 
1649
  /* operand () gobbles spaces.  */
1650
  know (*input_line_pointer != ' ');
1651
 
1652
  op_left = operator (&op_chars);
1653
  while (op_left != O_illegal && op_rank[(int) op_left] > rank)
1654
    {
1655
      segT rightseg;
1656
      bfd_vma frag_off;
1657
 
1658
      input_line_pointer += op_chars;   /* -> after operator.  */
1659
 
1660
      rightseg = expr (op_rank[(int) op_left], &right, mode);
1661
      if (right.X_op == O_absent)
1662
        {
1663
          as_warn (_("missing operand; zero assumed"));
1664
          right.X_op = O_constant;
1665
          right.X_add_number = 0;
1666
          right.X_add_symbol = NULL;
1667
          right.X_op_symbol = NULL;
1668
        }
1669
 
1670
      know (*input_line_pointer != ' ');
1671
 
1672
      if (op_left == O_index)
1673
        {
1674
          if (*input_line_pointer != ']')
1675
            as_bad ("missing right bracket");
1676
          else
1677
            {
1678
              ++input_line_pointer;
1679
              SKIP_WHITESPACE ();
1680
            }
1681
        }
1682
 
1683
      op_right = operator (&op_chars);
1684
 
1685
      know (op_right == O_illegal
1686
            || op_rank[(int) op_right] <= op_rank[(int) op_left]);
1687
      know ((int) op_left >= (int) O_multiply
1688
            && (int) op_left <= (int) O_index);
1689
 
1690
      /* input_line_pointer->after right-hand quantity.  */
1691
      /* left-hand quantity in resultP.  */
1692
      /* right-hand quantity in right.  */
1693
      /* operator in op_left.  */
1694
 
1695
      if (resultP->X_op == O_big)
1696
        {
1697
          if (resultP->X_add_number > 0)
1698
            as_warn (_("left operand is a bignum; integer 0 assumed"));
1699
          else
1700
            as_warn (_("left operand is a float; integer 0 assumed"));
1701
          resultP->X_op = O_constant;
1702
          resultP->X_add_number = 0;
1703
          resultP->X_add_symbol = NULL;
1704
          resultP->X_op_symbol = NULL;
1705
        }
1706
      if (right.X_op == O_big)
1707
        {
1708
          if (right.X_add_number > 0)
1709
            as_warn (_("right operand is a bignum; integer 0 assumed"));
1710
          else
1711
            as_warn (_("right operand is a float; integer 0 assumed"));
1712
          right.X_op = O_constant;
1713
          right.X_add_number = 0;
1714
          right.X_add_symbol = NULL;
1715
          right.X_op_symbol = NULL;
1716
        }
1717
 
1718
      /* Optimize common cases.  */
1719
#ifdef md_optimize_expr
1720
      if (md_optimize_expr (resultP, op_left, &right))
1721
        {
1722
          /* Skip.  */
1723
          ;
1724
        }
1725
      else
1726
#endif
1727
#ifndef md_register_arithmetic
1728
# define md_register_arithmetic 1
1729
#endif
1730
      if (op_left == O_add && right.X_op == O_constant
1731
          && (md_register_arithmetic || resultP->X_op != O_register))
1732
        {
1733
          /* X + constant.  */
1734
          resultP->X_add_number += right.X_add_number;
1735
        }
1736
      /* This case comes up in PIC code.  */
1737
      else if (op_left == O_subtract
1738
               && right.X_op == O_symbol
1739
               && resultP->X_op == O_symbol
1740
               && retval == rightseg
1741
#ifdef md_allow_local_subtract
1742
               && md_allow_local_subtract (resultP, & right, rightseg)
1743
#endif
1744
               && (SEG_NORMAL (rightseg)
1745
                   || right.X_add_symbol == resultP->X_add_symbol)
1746
               && frag_offset_fixed_p (symbol_get_frag (resultP->X_add_symbol),
1747
                                       symbol_get_frag (right.X_add_symbol),
1748
                                       &frag_off))
1749
        {
1750
          resultP->X_add_number -= right.X_add_number;
1751
          resultP->X_add_number -= frag_off / OCTETS_PER_BYTE;
1752
          resultP->X_add_number += (S_GET_VALUE (resultP->X_add_symbol)
1753
                                    - S_GET_VALUE (right.X_add_symbol));
1754
          resultP->X_op = O_constant;
1755
          resultP->X_add_symbol = 0;
1756
        }
1757
      else if (op_left == O_subtract && right.X_op == O_constant
1758
               && (md_register_arithmetic || resultP->X_op != O_register))
1759
        {
1760
          /* X - constant.  */
1761
          resultP->X_add_number -= right.X_add_number;
1762
        }
1763
      else if (op_left == O_add && resultP->X_op == O_constant
1764
               && (md_register_arithmetic || right.X_op != O_register))
1765
        {
1766
          /* Constant + X.  */
1767
          resultP->X_op = right.X_op;
1768
          resultP->X_add_symbol = right.X_add_symbol;
1769
          resultP->X_op_symbol = right.X_op_symbol;
1770
          resultP->X_add_number += right.X_add_number;
1771
          retval = rightseg;
1772
        }
1773
      else if (resultP->X_op == O_constant && right.X_op == O_constant)
1774
        {
1775
          /* Constant OP constant.  */
1776
          offsetT v = right.X_add_number;
1777
          if (v == 0 && (op_left == O_divide || op_left == O_modulus))
1778
            {
1779
              as_warn (_("division by zero"));
1780
              v = 1;
1781
            }
1782
          switch (op_left)
1783
            {
1784
            default:                    abort ();
1785
            case O_multiply:            resultP->X_add_number *= v; break;
1786
            case O_divide:              resultP->X_add_number /= v; break;
1787
            case O_modulus:             resultP->X_add_number %= v; break;
1788
            case O_left_shift:          resultP->X_add_number <<= v; break;
1789
            case O_right_shift:
1790
              /* We always use unsigned shifts, to avoid relying on
1791
                 characteristics of the compiler used to compile gas.  */
1792
              resultP->X_add_number =
1793
                (offsetT) ((valueT) resultP->X_add_number >> (valueT) v);
1794
              break;
1795
            case O_bit_inclusive_or:    resultP->X_add_number |= v; break;
1796
            case O_bit_or_not:          resultP->X_add_number |= ~v; break;
1797
            case O_bit_exclusive_or:    resultP->X_add_number ^= v; break;
1798
            case O_bit_and:             resultP->X_add_number &= v; break;
1799
              /* Constant + constant (O_add) is handled by the
1800
                 previous if statement for constant + X, so is omitted
1801
                 here.  */
1802
            case O_subtract:            resultP->X_add_number -= v; break;
1803
            case O_eq:
1804
              resultP->X_add_number =
1805
                resultP->X_add_number == v ? ~ (offsetT) 0 : 0;
1806
              break;
1807
            case O_ne:
1808
              resultP->X_add_number =
1809
                resultP->X_add_number != v ? ~ (offsetT) 0 : 0;
1810
              break;
1811
            case O_lt:
1812
              resultP->X_add_number =
1813
                resultP->X_add_number <  v ? ~ (offsetT) 0 : 0;
1814
              break;
1815
            case O_le:
1816
              resultP->X_add_number =
1817
                resultP->X_add_number <= v ? ~ (offsetT) 0 : 0;
1818
              break;
1819
            case O_ge:
1820
              resultP->X_add_number =
1821
                resultP->X_add_number >= v ? ~ (offsetT) 0 : 0;
1822
              break;
1823
            case O_gt:
1824
              resultP->X_add_number =
1825
                resultP->X_add_number >  v ? ~ (offsetT) 0 : 0;
1826
              break;
1827
            case O_logical_and:
1828
              resultP->X_add_number = resultP->X_add_number && v;
1829
              break;
1830
            case O_logical_or:
1831
              resultP->X_add_number = resultP->X_add_number || v;
1832
              break;
1833
            }
1834
        }
1835
      else if (resultP->X_op == O_symbol
1836
               && right.X_op == O_symbol
1837
               && (op_left == O_add
1838
                   || op_left == O_subtract
1839
                   || (resultP->X_add_number == 0
1840
                       && right.X_add_number == 0)))
1841
        {
1842
          /* Symbol OP symbol.  */
1843
          resultP->X_op = op_left;
1844
          resultP->X_op_symbol = right.X_add_symbol;
1845
          if (op_left == O_add)
1846
            resultP->X_add_number += right.X_add_number;
1847
          else if (op_left == O_subtract)
1848
            {
1849
              resultP->X_add_number -= right.X_add_number;
1850
              if (retval == rightseg && SEG_NORMAL (retval))
1851
                {
1852
                  retval = absolute_section;
1853
                  rightseg = absolute_section;
1854
                }
1855
            }
1856
        }
1857
      else
1858
        {
1859
          /* The general case.  */
1860
          resultP->X_add_symbol = make_expr_symbol (resultP);
1861
          resultP->X_op_symbol = make_expr_symbol (&right);
1862
          resultP->X_op = op_left;
1863
          resultP->X_add_number = 0;
1864
          resultP->X_unsigned = 1;
1865
        }
1866
 
1867
      if (retval != rightseg)
1868
        {
1869
          if (! SEG_NORMAL (retval))
1870
            {
1871
              if (retval != undefined_section || SEG_NORMAL (rightseg))
1872
                retval = rightseg;
1873
            }
1874
          else if (SEG_NORMAL (rightseg)
1875
#ifdef DIFF_EXPR_OK
1876
                   && op_left != O_subtract
1877
#endif
1878
                   )
1879
            as_bad (_("operation combines symbols in different segments"));
1880
        }
1881
 
1882
      op_left = op_right;
1883
    }                           /* While next operator is >= this rank.  */
1884
 
1885
  /* The PA port needs this information.  */
1886
  if (resultP->X_add_symbol)
1887
    symbol_mark_used (resultP->X_add_symbol);
1888
 
1889
  if (rank == 0 && mode == expr_evaluate)
1890
    resolve_expression (resultP);
1891
 
1892
  return resultP->X_op == O_constant ? absolute_section : retval;
1893
}
1894
 
1895
/* Resolve an expression without changing any symbols/sub-expressions
1896
   used.  */
1897
 
1898
int
1899
resolve_expression (expressionS *expressionP)
1900
{
1901
  /* Help out with CSE.  */
1902
  valueT final_val = expressionP->X_add_number;
1903
  symbolS *add_symbol = expressionP->X_add_symbol;
1904
  symbolS *op_symbol = expressionP->X_op_symbol;
1905
  operatorT op = expressionP->X_op;
1906
  valueT left, right;
1907
  segT seg_left, seg_right;
1908
  fragS *frag_left, *frag_right;
1909
  bfd_vma frag_off;
1910
 
1911
  switch (op)
1912
    {
1913
    default:
1914
      return 0;
1915
 
1916
    case O_constant:
1917
    case O_register:
1918
      left = 0;
1919
      break;
1920
 
1921
    case O_symbol:
1922
    case O_symbol_rva:
1923
      if (!snapshot_symbol (&add_symbol, &left, &seg_left, &frag_left))
1924
        return 0;
1925
 
1926
      break;
1927
 
1928
    case O_uminus:
1929
    case O_bit_not:
1930
    case O_logical_not:
1931
      if (!snapshot_symbol (&add_symbol, &left, &seg_left, &frag_left))
1932
        return 0;
1933
 
1934
      if (seg_left != absolute_section)
1935
        return 0;
1936
 
1937
      if (op == O_logical_not)
1938
        left = !left;
1939
      else if (op == O_uminus)
1940
        left = -left;
1941
      else
1942
        left = ~left;
1943
      op = O_constant;
1944
      break;
1945
 
1946
    case O_multiply:
1947
    case O_divide:
1948
    case O_modulus:
1949
    case O_left_shift:
1950
    case O_right_shift:
1951
    case O_bit_inclusive_or:
1952
    case O_bit_or_not:
1953
    case O_bit_exclusive_or:
1954
    case O_bit_and:
1955
    case O_add:
1956
    case O_subtract:
1957
    case O_eq:
1958
    case O_ne:
1959
    case O_lt:
1960
    case O_le:
1961
    case O_ge:
1962
    case O_gt:
1963
    case O_logical_and:
1964
    case O_logical_or:
1965
      if (!snapshot_symbol (&add_symbol, &left, &seg_left, &frag_left)
1966
          || !snapshot_symbol (&op_symbol, &right, &seg_right, &frag_right))
1967
        return 0;
1968
 
1969
      /* Simplify addition or subtraction of a constant by folding the
1970
         constant into X_add_number.  */
1971
      if (op == O_add)
1972
        {
1973
          if (seg_right == absolute_section)
1974
            {
1975
              final_val += right;
1976
              op = O_symbol;
1977
              break;
1978
            }
1979
          else if (seg_left == absolute_section)
1980
            {
1981
              final_val += left;
1982
              left = right;
1983
              seg_left = seg_right;
1984
              add_symbol = op_symbol;
1985
              op = O_symbol;
1986
              break;
1987
            }
1988
        }
1989
      else if (op == O_subtract)
1990
        {
1991
          if (seg_right == absolute_section)
1992
            {
1993
              final_val -= right;
1994
              op = O_symbol;
1995
              break;
1996
            }
1997
        }
1998
 
1999
      /* Equality and non-equality tests are permitted on anything.
2000
         Subtraction, and other comparison operators are permitted if
2001
         both operands are in the same section.
2002
         Shifts by constant zero are permitted on anything.
2003
         Multiplies, bit-ors, and bit-ands with constant zero are
2004
         permitted on anything.
2005
         Multiplies and divides by constant one are permitted on
2006
         anything.
2007
         Binary operations with both operands being the same register
2008
         or undefined symbol are permitted if the result doesn't depend
2009
         on the input value.
2010
         Otherwise, both operands must be absolute.  We already handled
2011
         the case of addition or subtraction of a constant above.  */
2012
      frag_off = 0;
2013
      if (!(seg_left == absolute_section
2014
               && seg_right == absolute_section)
2015
          && !(op == O_eq || op == O_ne)
2016
          && !((op == O_subtract
2017
                || op == O_lt || op == O_le || op == O_ge || op == O_gt)
2018
               && seg_left == seg_right
2019
               && (finalize_syms
2020
                   || frag_offset_fixed_p (frag_left, frag_right, &frag_off))
2021
               && (seg_left != reg_section || left == right)
2022
               && (seg_left != undefined_section || add_symbol == op_symbol)))
2023
        {
2024
          if ((seg_left == absolute_section && left == 0)
2025
              || (seg_right == absolute_section && right == 0))
2026
            {
2027
              if (op == O_bit_exclusive_or || op == O_bit_inclusive_or)
2028
                {
2029
                  if (seg_right != absolute_section || right != 0)
2030
                    {
2031
                      seg_left = seg_right;
2032
                      left = right;
2033
                      add_symbol = op_symbol;
2034
                    }
2035
                  op = O_symbol;
2036
                  break;
2037
                }
2038
              else if (op == O_left_shift || op == O_right_shift)
2039
                {
2040
                  if (seg_left != absolute_section || left != 0)
2041
                    {
2042
                      op = O_symbol;
2043
                      break;
2044
                    }
2045
                }
2046
              else if (op != O_multiply
2047
                       && op != O_bit_or_not && op != O_bit_and)
2048
                return 0;
2049
            }
2050
          else if (op == O_multiply
2051
                   && seg_left == absolute_section && left == 1)
2052
            {
2053
              seg_left = seg_right;
2054
              left = right;
2055
              add_symbol = op_symbol;
2056
              op = O_symbol;
2057
              break;
2058
            }
2059
          else if ((op == O_multiply || op == O_divide)
2060
                   && seg_right == absolute_section && right == 1)
2061
            {
2062
              op = O_symbol;
2063
              break;
2064
            }
2065
          else if (left != right
2066
                   || ((seg_left != reg_section || seg_right != reg_section)
2067
                       && (seg_left != undefined_section
2068
                           || seg_right != undefined_section
2069
                           || add_symbol != op_symbol)))
2070
            return 0;
2071
          else if (op == O_bit_and || op == O_bit_inclusive_or)
2072
            {
2073
              op = O_symbol;
2074
              break;
2075
            }
2076
          else if (op != O_bit_exclusive_or && op != O_bit_or_not)
2077
            return 0;
2078
        }
2079
 
2080
      right += frag_off / OCTETS_PER_BYTE;
2081
      switch (op)
2082
        {
2083
        case O_add:                     left += right; break;
2084
        case O_subtract:                left -= right; break;
2085
        case O_multiply:                left *= right; break;
2086
        case O_divide:
2087
          if (right == 0)
2088
            return 0;
2089
          left = (offsetT) left / (offsetT) right;
2090
          break;
2091
        case O_modulus:
2092
          if (right == 0)
2093
            return 0;
2094
          left = (offsetT) left % (offsetT) right;
2095
          break;
2096
        case O_left_shift:              left <<= right; break;
2097
        case O_right_shift:             left >>= right; break;
2098
        case O_bit_inclusive_or:        left |= right; break;
2099
        case O_bit_or_not:              left |= ~right; break;
2100
        case O_bit_exclusive_or:        left ^= right; break;
2101
        case O_bit_and:                 left &= right; break;
2102
        case O_eq:
2103
        case O_ne:
2104
          left = (left == right
2105
                  && seg_left == seg_right
2106
                  && (finalize_syms || frag_left == frag_right)
2107
                  && (seg_left != undefined_section
2108
                      || add_symbol == op_symbol)
2109
                  ? ~ (valueT) 0 : 0);
2110
          if (op == O_ne)
2111
            left = ~left;
2112
          break;
2113
        case O_lt:
2114
          left = (offsetT) left <  (offsetT) right ? ~ (valueT) 0 : 0;
2115
          break;
2116
        case O_le:
2117
          left = (offsetT) left <= (offsetT) right ? ~ (valueT) 0 : 0;
2118
          break;
2119
        case O_ge:
2120
          left = (offsetT) left >= (offsetT) right ? ~ (valueT) 0 : 0;
2121
          break;
2122
        case O_gt:
2123
          left = (offsetT) left >  (offsetT) right ? ~ (valueT) 0 : 0;
2124
          break;
2125
        case O_logical_and:     left = left && right; break;
2126
        case O_logical_or:      left = left || right; break;
2127
        default:                abort ();
2128
        }
2129
 
2130
      op = O_constant;
2131
      break;
2132
    }
2133
 
2134
  if (op == O_symbol)
2135
    {
2136
      if (seg_left == absolute_section)
2137
        op = O_constant;
2138
      else if (seg_left == reg_section && final_val == 0)
2139
        op = O_register;
2140
      else if (add_symbol != expressionP->X_add_symbol)
2141
        final_val += left;
2142
      expressionP->X_add_symbol = add_symbol;
2143
    }
2144
  expressionP->X_op = op;
2145
 
2146
  if (op == O_constant || op == O_register)
2147
    final_val += left;
2148
  expressionP->X_add_number = final_val;
2149
 
2150
  return 1;
2151
}
2152
 
2153
/* This lives here because it belongs equally in expr.c & read.c.
2154
   expr.c is just a branch office read.c anyway, and putting it
2155
   here lessens the crowd at read.c.
2156
 
2157
   Assume input_line_pointer is at start of symbol name.
2158
   Advance input_line_pointer past symbol name.
2159
   Turn that character into a '\0', returning its former value.
2160
   This allows a string compare (RMS wants symbol names to be strings)
2161
   of the symbol name.
2162
   There will always be a char following symbol name, because all good
2163
   lines end in end-of-line.  */
2164
 
2165
char
2166
get_symbol_end (void)
2167
{
2168
  char c;
2169
 
2170
  /* We accept \001 in a name in case this is being called with a
2171
     constructed string.  */
2172
  if (is_name_beginner (c = *input_line_pointer++) || c == '\001')
2173
    {
2174
      while (is_part_of_name (c = *input_line_pointer++)
2175
             || c == '\001')
2176
        ;
2177
      if (is_name_ender (c))
2178
        c = *input_line_pointer++;
2179
    }
2180
  *--input_line_pointer = 0;
2181
  return (c);
2182
}
2183
 
2184
unsigned int
2185
get_single_number (void)
2186
{
2187
  expressionS exp;
2188
  operand (&exp, expr_normal);
2189
  return exp.X_add_number;
2190
}

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.