URL https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [binutils-2.18.50/] [libtool.m4] - Blame information for rev 862

Go to most recent revision | Details | Compare with Previous | View Log

# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
#
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
# 2006, 2007 Free Software Foundation, Inc.
#
# This file is part of GNU Libtool:
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
 
m4_define([_LT_COPYING], [dnl
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
# 2006, 2007 Free Software Foundation, Inc.
#
# This file is part of GNU Libtool:
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, a copy can be downloaded from
# http://www.gnu.org/copyleft/gpl.html, or by writing to the Free
# Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
])
 
# serial 53 LT_INIT
 
 
# LT_PREREQ(VERSION)
# ------------------
# Complain and exit if this libtool version is less that VERSION.
m4_defun([LT_PREREQ],
[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
       [m4_default([$3],
                   [m4_fatal([Libtool version $1 or higher is required],
                             63)])],
       [$2])])
 
 
# LT_INIT([OPTIONS])
# ------------------
AC_DEFUN([LT_INIT],
[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
AC_BEFORE([$0], [LT_LANG])dnl
AC_BEFORE([$0], [LT_OUTPUT])dnl
 
dnl Autoconf doesn't catch unexpanded LT_ macros by default:
m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
dnl unless we require an AC_DEFUNed macro:
AC_REQUIRE([LTOPTIONS_VERSION])dnl
AC_REQUIRE([LTSUGAR_VERSION])dnl
AC_REQUIRE([LTVERSION_VERSION])dnl
m4_require([_LT_PROG_LTMAIN])dnl
m4_require([_LT_SET_OPTIONS], [_LT_SET_OPTIONS([$1])])dnl
 
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ltmain"
 
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl
 
_LT_SETUP
 
# Only expand once:
m4_define([LT_INIT])
])# _LT_INIT
 
# Old names:
AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
 
 
# _LT_CC_BASENAME(CC)
# -------------------
# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
m4_defun([_LT_CC_BASENAME],
[for cc_temp in $1""; do
  case $cc_temp in
    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
    \-*) ;;
    *) break;;
  esac
done
cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
])
 
 
# _LT_FILEUTILS_DEFAULTS
# ----------------------
# It is okay to use these file commands and assume they have been set
# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
m4_defun([_LT_FILEUTILS_DEFAULTS],
[: ${CP="cp -f"}
: ${MV="mv -f"}
: ${RM="rm -f"}
])# _LT_FILEUTILS_DEFAULTS
 
 
# _LT_SETUP
# ---------
m4_defun([_LT_SETUP],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
_LT_DECL([], [host_alias], [0], [The host system])dnl
_LT_DECL([], [host], [0])dnl
_LT_DECL([], [host_os], [0])dnl
dnl
_LT_DECL([], [build_alias], [0], [The build system])dnl
_LT_DECL([], [build], [0])dnl
_LT_DECL([], [build_os], [0])dnl
dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([LT_PATH_LD])dnl
AC_REQUIRE([LT_PATH_NM])dnl
dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
test -z "$LN_S" && LN_S="ln -s"
_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
dnl
AC_REQUIRE([LT_CMD_MAX_LEN])dnl
AC_REQUIRE([AC_OBJEXT])dnl
_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
AC_REQUIRE([AC_EXEEXT])dnl
_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_CHECK_SHELL_FEATURES])dnl
m4_require([_LT_CMD_RELOAD])dnl
m4_require([_LT_CHECK_MAGIC_METHOD])dnl
m4_require([_LT_CMD_OLD_ARCHIVE])dnl
m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
 
_LT_CONFIG_LIBTOOL_INIT([
# See if we are running on zsh, and set the options which allow our
# commands through without removal of \ escapes INIT.
if test -n "\${ZSH_VERSION+set}" ; then
   setopt NO_GLOB_SUBST
fi
])
if test -n "${ZSH_VERSION+set}" ; then
   setopt NO_GLOB_SUBST
fi
 
_LT_CHECK_OBJDIR
 
m4_require([_LT_TAG_COMPILER])dnl
_LT_PROG_ECHO_BACKSLASH
 
case $host_os in
aix3*)
  # AIX sometimes has problems with the GCC collect2 program.  For some
  # reason, if we set the COLLECT_NAMES environment variable, the problems
  # vanish in a puff of smoke.
  if test "X${COLLECT_NAMES+set}" != Xset; then
    COLLECT_NAMES=
    export COLLECT_NAMES
  fi
  ;;
esac
 
# Sed substitution that helps us do robust quoting.  It backslashifies
# metacharacters that are still active within double-quoted strings.
sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
 
# Same as above, but do not quote variable references.
double_quote_subst='s/\([["`\\]]\)/\\\1/g'
 
# Sed substitution to delay expansion of an escaped shell variable in a
# double_quote_subst'ed string.
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
 
# Sed substitution to delay expansion of an escaped single quote.
delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
 
# Sed substitution to avoid accidental globbing in evaled expressions
no_glob_subst='s/\*/\\\*/g'
 
# Global variables:
ofile=libtool
can_build_shared=yes
 
# All known linkers require a `.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
 
with_gnu_ld="$lt_cv_prog_gnu_ld"
 
old_CC="$CC"
old_CFLAGS="$CFLAGS"
 
# Set sane defaults for various variables
test -z "$CC" && CC=cc
test -z "$LTCC" && LTCC=$CC
test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
test -z "$LD" && LD=ld
test -z "$ac_objext" && ac_objext=o
 
_LT_CC_BASENAME([$compiler])
 
# Only perform the check for file, if the check method requires it
test -z "$MAGIC_CMD" && MAGIC_CMD=file
case $deplibs_check_method in
file_magic*)
  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
    _LT_PATH_MAGIC
  fi
  ;;
esac
 
# Use C for the default configuration in the libtool script
LT_SUPPORTED_TAG([CC])
_LT_LANG_C_CONFIG
_LT_LANG_DEFAULT_CONFIG
_LT_CONFIG_COMMANDS
])# _LT_SETUP
 
 
# _LT_PROG_LTMAIN
# ---------------
# Note that this code is called both from `configure', and `config.status'
# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
# `config.status' has no value for ac_aux_dir unless we are using Automake,
# so we pass a copy along to make sure it has a sensible value anyway.
m4_defun([_LT_PROG_LTMAIN],
[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
ltmain="$ac_aux_dir/ltmain.sh"
])# _LT_PROG_LTMAIN
 
 
## ------------------------------------- ##
## Accumulate code for creating libtool. ##
## ------------------------------------- ##
 
# So that we can recreate a full libtool script including additional
# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
# in macros and then make a single call at the end using the `libtool'
# label.
 
 
# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
# ----------------------------------------
# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
m4_define([_LT_CONFIG_LIBTOOL_INIT],
[m4_ifval([$1],
          [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
                     [$1
])])])
 
# Initialize.
m4_define([_LT_OUTPUT_LIBTOOL_INIT])
 
 
# _LT_CONFIG_LIBTOOL([COMMANDS])
# ------------------------------
# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
m4_define([_LT_CONFIG_LIBTOOL],
[m4_ifval([$1],
          [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
                     [$1
])])])
 
# Initialize.
m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
 
 
# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
# -----------------------------------------------------
m4_defun([_LT_CONFIG_SAVE_COMMANDS],
[_LT_CONFIG_LIBTOOL([$1])
_LT_CONFIG_LIBTOOL_INIT([$2])
])
 
 
# _LT_FORMAT_COMMENT([COMMENT])
# -----------------------------
# Add leading comment marks to the start of each line, and a trailing
# full-stop to the whole comment if one is not present already.
m4_define([_LT_FORMAT_COMMENT],
[m4_ifval([$1], [
m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
)])
 
 
 
## ------------------------ ##
## FIXME: Eliminate VARNAME ##
## ------------------------ ##
 
 
# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
# -------------------------------------------------------------------
# CONFIGNAME is the name given to the value in the libtool script.
# VARNAME is the (base) name used in the configure script.
# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
# VARNAME.  Any other value will be used directly.
m4_define([_LT_DECL],
[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
        [m4_ifval([$1], [$1], [$2])])
    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
    m4_ifval([$4],
        [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
    lt_dict_add_subkey([lt_decl_dict], [$2],
        [tagged?], [m4_ifval([$5], [yes], [no])])])
])
 
 
# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
# --------------------------------------------------------
m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
 
 
# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
# ------------------------------------------------
m4_define([lt_decl_tag_varnames],
[_lt_decl_filter([tagged?], [yes], $@)])
 
 
# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
# ---------------------------------------------------------
m4_define([_lt_decl_filter],
[m4_case([$#],
  [0], [m4_fatal([$0: too few arguments: $#])],
  [1], [m4_fatal([$0: too few arguments: $#: $1])],
  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
  [lt_dict_filter([lt_decl_dict], $@)])[]dnl
])
 
 
# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
# --------------------------------------------------
m4_define([lt_decl_quote_varnames],
[_lt_decl_filter([value], [1], $@)])
 
 
# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
# ---------------------------------------------------
m4_define([lt_decl_dquote_varnames],
[_lt_decl_filter([value], [2], $@)])
 
 
# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
# ---------------------------------------------------
m4_define([lt_decl_varnames_tagged],
[_$0(m4_quote(m4_default([$1], [[, ]])),
     m4_quote(m4_if([$2], [],
                     m4_quote(lt_decl_tag_varnames),
                  m4_quote(m4_shift($@)))),
     m4_split(m4_normalize(m4_quote(_LT_TAGS))))])
m4_define([_lt_decl_varnames_tagged], [lt_combine([$1], [$2], [_], $3)])
 
 
# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
# ------------------------------------------------
m4_define([lt_decl_all_varnames],
[_$0(m4_quote(m4_default([$1], [[, ]])),
     m4_if([$2], [],
           m4_quote(lt_decl_varnames),
        m4_quote(m4_shift($@))))[]dnl
])
m4_define([_lt_decl_all_varnames],
[lt_join($@, lt_decl_varnames_tagged([$1],
                        lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
])
 
 
# _LT_CONFIG_STATUS_DECLARE([VARNAME])
# ------------------------------------
# Quote a variable value, and forward it to `config.status' so that its
# declaration there will have the same value as in `configure'.  VARNAME
# must have a single quote delimited value for this to work.
m4_define([_LT_CONFIG_STATUS_DECLARE],
[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
 
 
# _LT_CONFIG_STATUS_DECLARATIONS
# ------------------------------
# We delimit libtool config variables with single quotes, so when
# we write them to config.status, we have to be sure to quote all
# embedded single quotes properly.  In configure, this macro expands
# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
#
#    <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
 
 
# _LT_LIBTOOL_TAGS
# ----------------
# Output comment and list of tags supported by the script
m4_defun([_LT_LIBTOOL_TAGS],
[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
available_tags="_LT_TAGS"dnl
])
 
 
# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
# -----------------------------------
# Extract the dictionary values for VARNAME (optionally with TAG) and
# expand to a commented shell variable setting:
#
#    # Some comment about what VAR is for.
#    visible_name=$lt_internal_name
m4_define([_LT_LIBTOOL_DECLARE],
[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
                                           [description])))[]dnl
m4_pushdef([_libtool_name],
    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
    [0], [_libtool_name=[$]$1],
    [1], [_libtool_name=$lt_[]$1],
    [2], [_libtool_name=$lt_[]$1],
    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
])
 
 
# _LT_LIBTOOL_CONFIG_VARS
# -----------------------
# Produce commented declarations of non-tagged libtool config variables
# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
# section) are produced by _LT_LIBTOOL_TAG_VARS.
m4_defun([_LT_LIBTOOL_CONFIG_VARS],
[m4_foreach([_lt_var],
    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
 
 
# _LT_LIBTOOL_TAG_VARS(TAG)
# -------------------------
m4_define([_LT_LIBTOOL_TAG_VARS],
[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
 
 
# _LT_TAGVAR(VARNAME, [TAGNAME])
# ------------------------------
m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
 
 
# _LT_CONFIG_COMMANDS
# -------------------
# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
# variables for single and double quote escaping we saved from calls
# to _LT_DECL, we can put quote escaped variables declarations
# into `config.status', and then the shell code to quote escape them in
# for loops in `config.status'.  Finally, any additional code accumulated
# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
m4_defun([_LT_CONFIG_COMMANDS],
[AC_PROVIDE_IFELSE([LT_OUTPUT],
        dnl If the libtool generation code has been placed in $CONFIG_LT,
        dnl instead of duplicating it all over again into config.status,
        dnl then we will have config.status run $CONFIG_LT later, so it
        dnl needs to know what name is stored there:
        [AC_CONFIG_COMMANDS([libtool],
            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
    dnl If the libtool generation code is destined for config.status,
    dnl expand the accumulated commands and init code now:
    [AC_CONFIG_COMMANDS([libtool],
        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
])#_LT_CONFIG_COMMANDS
 
 
# Initialize.
m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
[
 
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
sed_quote_subst='$sed_quote_subst'
double_quote_subst='$double_quote_subst'
delay_variable_subst='$delay_variable_subst'
_LT_CONFIG_STATUS_DECLARATIONS
LTCC='$LTCC'
LTCFLAGS='$LTCFLAGS'
compiler='$compiler_DEFAULT'
 
# Quote evaled strings.
for var in lt_decl_all_varnames([[ \
]], lt_decl_quote_varnames); do
    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
    *[[\\\\\\\`\\"\\\$]]*)
      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
      ;;
    *)
      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
      ;;
    esac
done
 
# Double-quote double-evaled strings.
for var in lt_decl_all_varnames([[ \
]], lt_decl_dquote_varnames); do
    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
    *[[\\\\\\\`\\"\\\$]]*)
      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
      ;;
    *)
      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
      ;;
    esac
done
 
# Fix-up fallback echo if it was mangled by the above quoting rules.
case \$lt_ECHO in
*'\\\[$]0 --fallback-echo"')dnl "
  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
  ;;
esac
 
_LT_OUTPUT_LIBTOOL_INIT
])
 
 
# LT_OUTPUT
# ---------
# This macro allows early generation of the libtool script (before
# AC_OUTPUT is called), incase it is used in configure for compilation
# tests.
AC_DEFUN([LT_OUTPUT],
[: ${CONFIG_LT=./config.lt}
AC_MSG_NOTICE([creating $CONFIG_LT])
cat >"$CONFIG_LT" <<_LTEOF
#! $SHELL
# Generated by $as_me.
# Run this file to recreate a libtool stub with the current configuration.
 
lt_cl_silent=false
SHELL=\${CONFIG_SHELL-$SHELL}
_LTEOF
 
cat >>"$CONFIG_LT" <<\_LTEOF
AS_SHELL_SANITIZE
_AS_PREPARE
 
exec AS_MESSAGE_FD>&1
exec AS_MESSAGE_LOG_FD>>config.log
{
  echo
  AS_BOX([Running $as_me.])
} >&AS_MESSAGE_LOG_FD
 
lt_cl_help="\
\`$as_me' creates a local libtool stub from the current configuration,
for use in further configure time tests before the real libtool is
generated.
 
Usage: $[0] [[OPTIONS]]
 
  -h, --help      print this help, then exit
  -V, --version   print version number, then exit
  -q, --quiet     do not print progress messages
  -d, --debug     don't remove temporary files
 
Report bugs to <bug-libtool@gnu.org>."
 
lt_cl_version="\
m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
configured by $[0], generated by m4_PACKAGE_STRING.
 
Copyright (C) 2007 Free Software Foundation, Inc.
This config.lt script is free software; the Free Software Foundation
gives unlimited permision to copy, distribute and modify it."
 
while test $[#] != 0
do
  case $[1] in
    --version | --v* | -V )
      echo "$lt_cl_version"; exit 0 ;;
    --help | --h* | -h )
      echo "$lt_cl_help"; exit 0 ;;
    --debug | --d* | -d )
      debug=: ;;
    --quiet | --q* | --silent | --s* | -q )
      lt_cl_silent=: ;;
 
    -*) AC_MSG_ERROR([unrecognized option: $[1]
Try `$[0] --help' for more information.]) ;;
 
    *) AC_MSG_ERROR([unrecognized argument: $[1]
Try `$[0] --help for more information.]) ;;
  esac
  shift
done
 
if $lt_cl_silent; then
  exec AS_MESSAGE_FD>/dev/null
fi
_LTEOF
 
cat >>"$CONFIG_LT" <<_LTEOF
_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
_LTEOF
 
cat >>"$CONFIG_LT" <<\_LTEOF
AC_MSG_NOTICE([creating $ofile])
_LT_OUTPUT_LIBTOOL_COMMANDS
AS_EXIT(0)
_LTEOF
chmod +x "$CONFIG_LT"
 
# configure is writing to config.log, but config.lt does its own redirection,
# appending to config.log, which fails on DOS, as config.log is still kept
# open by configure.  Here we exec the FD to /dev/null, effectively closing
# config.log, so it can be properly (re)opened and appended to by config.lt.
if test "$no_create" != yes; then
  lt_cl_success=:
  test "$silent" = yes &&
    lt_config_lt_args="$lt_config_lt_args --quiet"
  exec AS_MESSAGE_LOG_FD>/dev/null
  $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
  exec AS_MESSAGE_LOG_FD>>config.log
  $lt_cl_success || AS_EXIT(1)
fi
])# LT_OUTPUT
 
 
# _LT_CONFIG(TAG)
# ---------------
# If TAG is the built-in tag, create an initial libtool script with a
# default configuration from the untagged config vars.  Otherwise add code
# to config.status for appending the configuration named by TAG from the
# matching tagged config vars.
m4_defun([_LT_CONFIG],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
_LT_CONFIG_SAVE_COMMANDS([
  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
  m4_if(_LT_TAG, [C], [
    # See if we are running on zsh, and set the options which allow our
    # commands through without removal of \ escapes.
    if test -n "${ZSH_VERSION+set}" ; then
      setopt NO_GLOB_SUBST
    fi
 
    cfgfile="${ofile}T"
    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
    $RM "$cfgfile"
 
    cat <<_LT_EOF >> "$cfgfile"
#! $SHELL
 
# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
# Generated automatically by $as_me (GNU $PACKAGE$TIMESTAMP) $VERSION
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
#
_LT_COPYING
_LT_LIBTOOL_TAGS
 
# ### BEGIN LIBTOOL CONFIG
_LT_LIBTOOL_CONFIG_VARS
_LT_LIBTOOL_TAG_VARS
# ### END LIBTOOL CONFIG
 
_LT_EOF
 
  case $host_os in
  aix3*)
    cat <<\_LT_EOF >> "$cfgfile"
# AIX sometimes has problems with the GCC collect2 program.  For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test "X${COLLECT_NAMES+set}" != Xset; then
  COLLECT_NAMES=
  export COLLECT_NAMES
fi
_LT_EOF
    ;;
  esac
 
  _LT_PROG_LTMAIN
 
  # We use sed instead of cat because bash on DJGPP gets confused if
  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
  # text mode, it properly converts lines to CR/LF.  This bash problem
  # is reportedly fixed, but why not run on old versions too?
  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
    || (rm -f "$cfgfile"; exit 1)
 
  _LT_PROG_XSI_SHELLFNS
 
  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
    || (rm -f "$cfgfile"; exit 1)
 
  mv -f "$cfgfile" "$ofile" ||
    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
  chmod +x "$ofile"
],
[cat <<_LT_EOF >> "$ofile"
 
dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
dnl in a comment (ie after a #).
# ### BEGIN LIBTOOL TAG CONFIG: $1
_LT_LIBTOOL_TAG_VARS(_LT_TAG)
# ### END LIBTOOL TAG CONFIG: $1
_LT_EOF
])dnl /m4_if
],
[m4_if([$1], [], [
    PACKAGE='$PACKAGE'
    VERSION='$VERSION'
    TIMESTAMP='$TIMESTAMP'
    RM='$RM'
    ofile='$ofile'], [])
])dnl /_LT_CONFIG_SAVE_COMMANDS
])# _LT_CONFIG
 
 
# LT_SUPPORTED_TAG(TAG)
# ---------------------
# Trace this macro to discover what tags are supported by the libtool
# --tag option, using:
#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
AC_DEFUN([LT_SUPPORTED_TAG], [])
 
 
# C support is built-in for now
m4_define([_LT_LANG_C_enabled], [])
m4_define([_LT_TAGS], [])
 
 
# LT_LANG(LANG)
# -------------
# Enable libtool support for the given language if not already enabled.
AC_DEFUN([LT_LANG],
[AC_BEFORE([$0], [LT_OUTPUT])dnl
m4_case([$1],
  [C],                  [_LT_LANG(C)],
  [C++],                [_LT_LANG(CXX)],
  [Java],               [_LT_LANG(GCJ)],
  [Fortran 77],         [_LT_LANG(F77)],
  [Fortran],            [_LT_LANG(FC)],
  [Windows Resource],   [_LT_LANG(RC)],
  [m4_ifdef([_LT_LANG_]$1[_CONFIG],
    [_LT_LANG($1)],
    [m4_fatal([$0: unsupported language: "$1"])])])dnl
])# LT_LANG
 
 
# _LT_LANG(LANGNAME)
# ------------------
m4_defun([_LT_LANG],
[m4_ifdef([_LT_LANG_]$1[_enabled], [],
  [LT_SUPPORTED_TAG([$1])dnl
  m4_append([_LT_TAGS], [$1 ])dnl
  m4_define([_LT_LANG_]$1[_enabled], [])dnl
  _LT_LANG_$1_CONFIG($1)])dnl
])# _LT_LANG
 
 
# _LT_LANG_DEFAULT_CONFIG
# -----------------------
m4_defun([_LT_LANG_DEFAULT_CONFIG],
[AC_PROVIDE_IFELSE([AC_PROG_CXX],
  [LT_LANG(CXX)],
  [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
 
AC_PROVIDE_IFELSE([AC_PROG_F77],
  [LT_LANG(F77)],
  [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
 
AC_PROVIDE_IFELSE([AC_PROG_FC],
  [LT_LANG(FC)],
  [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
 
dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
dnl pulling things in needlessly.
AC_PROVIDE_IFELSE([AC_PROG_GCJ],
  [LT_LANG(GCJ)],
  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
    [LT_LANG(GCJ)],
    [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
      [LT_LANG(GCJ)],
      [m4_ifdef([AC_PROG_GCJ],
        [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
       m4_ifdef([A][M_PROG_GCJ],
        [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
       m4_ifdef([LT_PROG_GCJ],
        [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
 
AC_PROVIDE_IFELSE([LT_PROG_RC],
  [LT_LANG(RC)],
  [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
])# _LT_LANG_DEFAULT_CONFIG
 
# Obsolete macros:
AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
dnl AC_DEFUN([AC_LIBTOOL_F77], [])
dnl AC_DEFUN([AC_LIBTOOL_FC], [])
dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
 
 
# _LT_TAG_COMPILER
# ----------------
m4_defun([_LT_TAG_COMPILER],
[AC_REQUIRE([AC_PROG_CC])dnl
 
_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
 
# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}
 
# If no C compiler flags were specified, use CFLAGS.
LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 
# Allow CC to be a program name with arguments.
compiler=$CC
])# _LT_TAG_COMPILER
 
 
# _LT_COMPILER_BOILERPLATE
# ------------------------
# Check for compiler boilerplate output or warnings with
# the simple compiler test code.
m4_defun([_LT_COMPILER_BOILERPLATE],
[m4_require([_LT_DECL_SED])dnl
ac_outfile=conftest.$ac_objext
echo "$lt_simple_compile_test_code" >conftest.$ac_ext
eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_compiler_boilerplate=`cat conftest.err`
$RM conftest*
])# _LT_COMPILER_BOILERPLATE
 
 
# _LT_LINKER_BOILERPLATE
# ----------------------
# Check for linker boilerplate output or warnings with
# the simple link test code.
m4_defun([_LT_LINKER_BOILERPLATE],
[m4_require([_LT_DECL_SED])dnl
ac_outfile=conftest.$ac_objext
echo "$lt_simple_link_test_code" >conftest.$ac_ext
eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_linker_boilerplate=`cat conftest.err`
$RM conftest*
])# _LT_LINKER_BOILERPLATE
 
 
# _LT_SYS_MODULE_PATH_AIX
# -----------------------
# Links a minimal program and checks the executable
# for the system default hardcoded library path. In most cases,
# this is /usr/lib:/lib, but when the MPI compilers are used
# the location of the communication and MPI libs are included too.
# If we don't find anything, use the default library path according
# to the aix ld manual.
m4_defun([_LT_SYS_MODULE_PATH_AIX],
[m4_require([_LT_DECL_SED])dnl
AC_LINK_IFELSE(AC_LANG_PROGRAM,[
lt_aix_libpath_sed='
    /Import File Strings/,/^$/ {
        /^0/ {
            s/^0  *\(.*\)$/\1/
            p
        }
    }'
aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
# Check for a 64-bit object if we didn't find anything.
if test -z "$aix_libpath"; then
  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
fi],[])
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
])# _LT_SYS_MODULE_PATH_AIX
 
 
# _LT_SHELL_INIT(ARG)
# -------------------
m4_define([_LT_SHELL_INIT],
[ifdef([AC_DIVERSION_NOTICE],
             [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
         [AC_DIVERT_PUSH(NOTICE)])
$1
AC_DIVERT_POP
])# _LT_SHELL_INIT
 
 
# _LT_PROG_ECHO_BACKSLASH
# -----------------------
# Add some code to the start of the generated configure script which
# will find an echo command which doesn't interpret backslashes.
m4_defun([_LT_PROG_ECHO_BACKSLASH],
[_LT_SHELL_INIT([
# Check that we are running under the correct shell.
SHELL=${CONFIG_SHELL-/bin/sh}
 
case X$lt_ECHO in
X*--fallback-echo)
  # Remove one level of quotation (which was required for Make).
  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
  ;;
esac
 
ECHO=${lt_ECHO-echo}
if test "X[$]1" = X--no-reexec; then
  # Discard the --no-reexec flag, and continue.
  shift
elif test "X[$]1" = X--fallback-echo; then
  # Avoid inline document here, it may be left over
  :
elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
  # Yippee, $ECHO works!
  :
else
  # Restart under the correct shell.
  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
fi
 
if test "X[$]1" = X--fallback-echo; then
  # used as fallback echo
  shift
  cat <<_LT_EOF
[$]*
_LT_EOF
  exit 0
fi
 
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
if test -z "$lt_ECHO"; then
  if test "X${echo_test_string+set}" != Xset; then
    # find a string as large as possible, as long as the shell can cope with it
    for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
         { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
      then
        break
      fi
    done
  fi
 
  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
     test "X$echo_testing_string" = "X$echo_test_string"; then
    :
  else
    # The Solaris, AIX, and Digital Unix default echo programs unquote
    # backslashes.  This makes it impossible to quote backslashes using
    #   echo "$something" | sed 's/\\/\\\\/g'
    #
    # So, first we look for a working echo in the user's PATH.
 
    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
    for dir in $PATH /usr/ucb; do
      IFS="$lt_save_ifs"
      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
         test "X$echo_testing_string" = "X$echo_test_string"; then
        ECHO="$dir/echo"
        break
      fi
    done
    IFS="$lt_save_ifs"
 
    if test "X$ECHO" = Xecho; then
      # We didn't find a better echo, so look for alternatives.
      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
         test "X$echo_testing_string" = "X$echo_test_string"; then
        # This shell has a builtin print -r that does the trick.
        ECHO='print -r'
      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
           test "X$CONFIG_SHELL" != X/bin/ksh; then
        # If we have ksh, try running configure again with it.
        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
        export ORIGINAL_CONFIG_SHELL
        CONFIG_SHELL=/bin/ksh
        export CONFIG_SHELL
        exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
      else
        # Try using printf.
        ECHO='printf %s\n'
        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
           echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
           test "X$echo_testing_string" = "X$echo_test_string"; then
          # Cool, printf works
          :
        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
             test "X$echo_testing_string" = 'X\t' &&
             echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
             test "X$echo_testing_string" = "X$echo_test_string"; then
          CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
          export CONFIG_SHELL
          SHELL="$CONFIG_SHELL"
          export SHELL
          ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
        elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
             test "X$echo_testing_string" = 'X\t' &&
             echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
             test "X$echo_testing_string" = "X$echo_test_string"; then
          ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
        else
          # maybe with a smaller string...
          prev=:
 
          for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
            if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
            then
              break
            fi
            prev="$cmd"
          done
 
          if test "$prev" != 'sed 50q "[$]0"'; then
            echo_test_string=`eval $prev`
            export echo_test_string
            exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
          else
            # Oops.  We lost completely, so just stick with echo.
            ECHO=echo
          fi
        fi
      fi
    fi
  fi
fi
 
# Copy echo and quote the copy suitably for passing to libtool from
# the Makefile, instead of quoting the original, which is used later.
lt_ECHO=$ECHO
if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
   lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
fi
 
AC_SUBST(lt_ECHO)
])
_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
_LT_DECL([], [ECHO], [1],
    [An echo program that does not interpret backslashes])
])# _LT_PROG_ECHO_BACKSLASH
 
 
# _LT_ENABLE_LOCK
# ---------------
m4_defun([_LT_ENABLE_LOCK],
[AC_REQUIRE([AC_OBJEXT])dnl
AC_ARG_ENABLE([libtool-lock],
  [AS_HELP_STRING([--disable-libtool-lock],
    [avoid locking (might break parallel builds)])])
test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
ia64-*-hpux*)
  # Find out which ABI we are using.
  echo 'int i;' > conftest.$ac_ext
  if AC_TRY_EVAL(ac_compile); then
    case `/usr/bin/file conftest.$ac_objext` in
      *ELF-32*)
        HPUX_IA64_MODE="32"
        ;;
      *ELF-64*)
        HPUX_IA64_MODE="64"
        ;;
    esac
  fi
  rm -rf conftest*
  ;;
*-*-irix6*)
  # Find out which ABI we are using.
  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
  if AC_TRY_EVAL(ac_compile); then
    if test "$lt_cv_prog_gnu_ld" = yes; then
      case `/usr/bin/file conftest.$ac_objext` in
        *32-bit*)
          LD="${LD-ld} -melf32bsmip"
          ;;
        *N32*)
          LD="${LD-ld} -melf32bmipn32"
          ;;
        *64-bit*)
          LD="${LD-ld} -melf64bmip"
        ;;
      esac
    else
      case `/usr/bin/file conftest.$ac_objext` in
        *32-bit*)
          LD="${LD-ld} -32"
          ;;
        *N32*)
          LD="${LD-ld} -n32"
          ;;
        *64-bit*)
          LD="${LD-ld} -64"
          ;;
      esac
    fi
  fi
  rm -rf conftest*
  ;;
 
x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
  # Find out which ABI we are using.
  echo 'int i;' > conftest.$ac_ext
  if AC_TRY_EVAL(ac_compile); then
    case `/usr/bin/file conftest.o` in
      *32-bit*)
        case $host in
          x86_64-*kfreebsd*-gnu)
            LD="${LD-ld} -m elf_i386_fbsd"
            ;;
          x86_64-*linux*)
            LD="${LD-ld} -m elf_i386"
            ;;
          ppc64-*linux*|powerpc64-*linux*)
            LD="${LD-ld} -m elf32ppclinux"
            ;;
          s390x-*linux*)
            LD="${LD-ld} -m elf_s390"
            ;;
          sparc64-*linux*)
            LD="${LD-ld} -m elf32_sparc"
            ;;
        esac
        ;;
      *64-bit*)
        case $host in
          x86_64-*kfreebsd*-gnu)
            LD="${LD-ld} -m elf_x86_64_fbsd"
            ;;
          x86_64-*linux*)
            LD="${LD-ld} -m elf_x86_64"
            ;;
          ppc*-*linux*|powerpc*-*linux*)
            LD="${LD-ld} -m elf64ppc"
            ;;
          s390*-*linux*|s390*-*tpf*)
            LD="${LD-ld} -m elf64_s390"
            ;;
          sparc*-*linux*)
            LD="${LD-ld} -m elf64_sparc"
            ;;
        esac
        ;;
    esac
  fi
  rm -rf conftest*
  ;;
 
*-*-sco3.2v5*)
  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
  SAVE_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -belf"
  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
    [AC_LANG_PUSH(C)
     AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
     AC_LANG_POP])
  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
    CFLAGS="$SAVE_CFLAGS"
  fi
  ;;
sparc*-*solaris*)
  # Find out which ABI we are using.
  echo 'int i;' > conftest.$ac_ext
  if AC_TRY_EVAL(ac_compile); then
    case `/usr/bin/file conftest.o` in
    *64-bit*)
      case $lt_cv_prog_gnu_ld in
      yes*) LD="${LD-ld} -m elf64_sparc" ;;
      *)    LD="${LD-ld} -64" ;;
      esac
      ;;
    esac
  fi
  rm -rf conftest*
  ;;
esac
 
need_locks="$enable_libtool_lock"
])# _LT_ENABLE_LOCK
 
 
# _LT_CMD_OLD_ARCHIVE
# -------------------
m4_defun([_LT_CMD_OLD_ARCHIVE],
[AC_CHECK_TOOL(AR, ar, false)
test -z "$AR" && AR=ar
test -z "$AR_FLAGS" && AR_FLAGS=cru
_LT_DECL([], [AR], [1], [The archiver])
_LT_DECL([], [AR_FLAGS], [1])
 
AC_CHECK_TOOL(STRIP, strip, :)
test -z "$STRIP" && STRIP=:
_LT_DECL([], [STRIP], [1], [A symbol stripping program])
 
AC_CHECK_TOOL(RANLIB, ranlib, :)
test -z "$RANLIB" && RANLIB=:
_LT_DECL([], [RANLIB], [1],
    [Commands used to install an old-style archive])
 
# Determine commands to create old-style static archives.
old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
old_postinstall_cmds='chmod 644 $oldlib'
old_postuninstall_cmds=
 
if test -n "$RANLIB"; then
  case $host_os in
  openbsd*)
    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
    ;;
  *)
    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
    ;;
  esac
  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
fi
_LT_DECL([], [old_postinstall_cmds], [2])
_LT_DECL([], [old_postuninstall_cmds], [2])
_LT_TAGDECL([], [old_archive_cmds], [2],
    [Commands used to build an old-style archive])
])# _LT_CMD_OLD_ARCHIVE
 
 
# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
#               [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
# ----------------------------------------------------------------
# Check whether the given compiler option works
AC_DEFUN([_LT_COMPILER_OPTION],
[AC_REQUIRE([AC_OBJEXT])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_SED])dnl
AC_CACHE_CHECK([$1], [$2],
  [$2=no
   m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
   lt_compiler_flag="$3"
   # Insert the option either (1) after the last *FLAGS variable, or
   # (2) before a word containing "conftest.", or (3) at the end.
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   # The option is referenced via a variable to avoid confusing sed.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
   (eval "$lt_compile" 2>conftest.err)
   ac_status=$?
   cat conftest.err >&AS_MESSAGE_LOG_FD
   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
   if (exit $ac_status) && test -s "$ac_outfile"; then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings other than the usual output.
     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
       $2=yes
     fi
   fi
   $RM conftest*
])
 
if test x"[$]$2" = xyes; then
    m4_if([$5], , :, [$5])
else
    m4_if([$6], , :, [$6])
fi
])# _LT_COMPILER_OPTION
 
# Old name:
AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
 
 
# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
#                  [ACTION-SUCCESS], [ACTION-FAILURE])
# ----------------------------------------------------
# Check whether the given linker option works
AC_DEFUN([_LT_LINKER_OPTION],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_SED])dnl
AC_CACHE_CHECK([$1], [$2],
  [$2=no
   save_LDFLAGS="$LDFLAGS"
   LDFLAGS="$LDFLAGS $3"
   echo "$lt_simple_link_test_code" > conftest.$ac_ext
   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
     # The linker can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test -s conftest.err; then
       # Append any errors to the config.log.
       cat conftest.err 1>&AS_MESSAGE_LOG_FD
       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
       if diff conftest.exp conftest.er2 >/dev/null; then
         $2=yes
       fi
     else
       $2=yes
     fi
   fi
   $RM conftest*
   LDFLAGS="$save_LDFLAGS"
])
 
if test x"[$]$2" = xyes; then
    m4_if([$4], , :, [$4])
else
    m4_if([$5], , :, [$5])
fi
])# _LT_LINKER_OPTION
 
# Old name:
AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
 
 
# LT_CMD_MAX_LEN
#---------------
AC_DEFUN([LT_CMD_MAX_LEN],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
# find the maximum length of command line arguments
AC_MSG_CHECKING([the maximum length of command line arguments])
AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
  i=0
  teststring="ABCD"
 
  case $build_os in
  msdosdjgpp*)
    # On DJGPP, this test can blow up pretty badly due to problems in libc
    # (any single argument exceeding 2000 bytes causes a buffer overrun
    # during glob expansion).  Even if it were fixed, the result of this
    # check would be larger than it should be.
    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
    ;;
 
  gnu*)
    # Under GNU Hurd, this test is not required because there is
    # no limit to the length of command line arguments.
    # Libtool will interpret -1 as no limit whatsoever
    lt_cv_sys_max_cmd_len=-1;
    ;;
 
  cygwin* | mingw*)
    # On Win9x/ME, this test blows up -- it succeeds, but takes
    # about 5 minutes as the teststring grows exponentially.
    # Worse, since 9x/ME are not pre-emptively multitasking,
    # you end up with a "frozen" computer, even though with patience
    # the test eventually succeeds (with a max line length of 256k).
    # Instead, let's just punt: use the minimum linelength reported by
    # all of the supported platforms: 8192 (on NT/2K/XP).
    lt_cv_sys_max_cmd_len=8192;
    ;;
 
  amigaos*)
    # On AmigaOS with pdksh, this test takes hours, literally.
    # So we just punt and use a minimum line length of 8192.
    lt_cv_sys_max_cmd_len=8192;
    ;;
 
  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
    # This has been around since 386BSD, at least.  Likely further.
    if test -x /sbin/sysctl; then
      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
    elif test -x /usr/sbin/sysctl; then
      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
    else
      lt_cv_sys_max_cmd_len=65536       # usable default for all BSDs
    fi
    # And add a safety zone
    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
    ;;
 
  interix*)
    # We know the value 262144 and hardcode it with a safety zone (like BSD)
    lt_cv_sys_max_cmd_len=196608
    ;;
 
  osf*)
    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
    # nice to cause kernel panics so lets avoid the loop below.
    # First set a reasonable default.
    lt_cv_sys_max_cmd_len=16384
    #
    if test -x /sbin/sysconfig; then
      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
        *1*) lt_cv_sys_max_cmd_len=-1 ;;
      esac
    fi
    ;;
  sco3.2v5*)
    lt_cv_sys_max_cmd_len=102400
    ;;
  sysv5* | sco5v6* | sysv4.2uw2*)
    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
    if test -n "$kargmax"; then
      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[         ]]//'`
    else
      lt_cv_sys_max_cmd_len=32768
    fi
    ;;
  *)
    lt_cv_sys_max_cmd_len=`getconf ARG_MAX 2> /dev/null`
    if test -n $lt_cv_sys_max_cmd_len; then
      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
    else
      # Make teststring a little bigger before we do anything with it.
      # a 1K string should be a reasonable start.
      for i in 1 2 3 4 5 6 7 8 ; do
        teststring=$teststring$teststring
      done
      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
      # If test is not a shell built-in, we'll probably end up computing a
      # maximum length that is only half of the actual maximum length, but
      # we can't tell.
      while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
                 = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
              test $i != 17 # 1/2 MB should be enough
      do
        i=`expr $i + 1`
        teststring=$teststring$teststring
      done
      # Only check the string length outside the loop.
      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
      teststring=
      # Add a significant safety factor because C++ compilers can tack on
      # massive amounts of additional arguments before passing them to the
      # linker.  It appears as though 1/2 is a usable value.
      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
    fi
    ;;
  esac
])
if test -n $lt_cv_sys_max_cmd_len ; then
  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
else
  AC_MSG_RESULT(none)
fi
max_cmd_len=$lt_cv_sys_max_cmd_len
_LT_DECL([], [max_cmd_len], [0],
    [What is the maximum length of a command?])
])# LT_CMD_MAX_LEN
 
# Old name:
AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
 
 
# _LT_HEADER_DLFCN
# ----------------
m4_defun([_LT_HEADER_DLFCN],
[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
])# _LT_HEADER_DLFCN
 
 
# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
# ----------------------------------------------------------------
m4_defun([_LT_TRY_DLOPEN_SELF],
[m4_require([_LT_HEADER_DLFCN])dnl
if test "$cross_compiling" = yes; then :
  [$4]
else
  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<_LT_EOF
[#line __oline__ "configure"
#include "confdefs.h"
 
#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif
 
#include <stdio.h>
 
#ifdef RTLD_GLOBAL
#  define LT_DLGLOBAL           RTLD_GLOBAL
#else
#  ifdef DL_GLOBAL
#    define LT_DLGLOBAL         DL_GLOBAL
#  else
#    define LT_DLGLOBAL         0
#  endif
#endif
 
/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
   find out it does not work in some platform. */
#ifndef LT_DLLAZY_OR_NOW
#  ifdef RTLD_LAZY
#    define LT_DLLAZY_OR_NOW            RTLD_LAZY
#  else
#    ifdef DL_LAZY
#      define LT_DLLAZY_OR_NOW          DL_LAZY
#    else
#      ifdef RTLD_NOW
#        define LT_DLLAZY_OR_NOW        RTLD_NOW
#      else
#        ifdef DL_NOW
#          define LT_DLLAZY_OR_NOW      DL_NOW
#        else
#          define LT_DLLAZY_OR_NOW      0
#        endif
#      endif
#    endif
#  endif
#endif
 
#ifdef __cplusplus
extern "C" void exit (int);
#endif
 
void fnord() { int i=42;}
int main ()
{
  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
  int status = $lt_dlunknown;
 
  if (self)
    {
      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
      /* dlclose (self); */
    }
  else
    puts (dlerror ());
 
    exit (status);
}]
_LT_EOF
  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
    lt_status=$?
    case x$lt_status in
      x$lt_dlno_uscore) $1 ;;
      x$lt_dlneed_uscore) $2 ;;
      x$lt_dlunknown|x*) $3 ;;
    esac
  else :
    # compilation failed
    $3
  fi
fi
rm -fr conftest*
])# _LT_TRY_DLOPEN_SELF
 
 
# LT_SYS_DLOPEN_SELF
# ------------------
AC_DEFUN([LT_SYS_DLOPEN_SELF],
[m4_require([_LT_HEADER_DLFCN])dnl
if test "x$enable_dlopen" != xyes; then
  enable_dlopen=unknown
  enable_dlopen_self=unknown
  enable_dlopen_self_static=unknown
else
  lt_cv_dlopen=no
  lt_cv_dlopen_libs=
 
  case $host_os in
  beos*)
    lt_cv_dlopen="load_add_on"
    lt_cv_dlopen_libs=
    lt_cv_dlopen_self=yes
    ;;
 
  mingw* | pw32*)
    lt_cv_dlopen="LoadLibrary"
    lt_cv_dlopen_libs=
    ;;
 
  cygwin*)
    lt_cv_dlopen="dlopen"
    lt_cv_dlopen_libs=
    ;;
 
  darwin*)
  # if libdl is installed we need to link against it
    AC_CHECK_LIB([dl], [dlopen],
                [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
    lt_cv_dlopen="dyld"
    lt_cv_dlopen_libs=
    lt_cv_dlopen_self=yes
    ])
    ;;
 
  *)
    AC_CHECK_FUNC([shl_load],
          [lt_cv_dlopen="shl_load"],
      [AC_CHECK_LIB([dld], [shl_load],
            [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
        [AC_CHECK_FUNC([dlopen],
              [lt_cv_dlopen="dlopen"],
          [AC_CHECK_LIB([dl], [dlopen],
                [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
            [AC_CHECK_LIB([svld], [dlopen],
                  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
              [AC_CHECK_LIB([dld], [dld_link],
                    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
              ])
            ])
          ])
        ])
      ])
    ;;
  esac
 
  if test "x$lt_cv_dlopen" != xno; then
    enable_dlopen=yes
  else
    enable_dlopen=no
  fi
 
  case $lt_cv_dlopen in
  dlopen)
    save_CPPFLAGS="$CPPFLAGS"
    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
 
    save_LDFLAGS="$LDFLAGS"
    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
 
    save_LIBS="$LIBS"
    LIBS="$lt_cv_dlopen_libs $LIBS"
 
    AC_CACHE_CHECK([whether a program can dlopen itself],
          lt_cv_dlopen_self, [dnl
          _LT_TRY_DLOPEN_SELF(
            lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
            lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
    ])
 
    if test "x$lt_cv_dlopen_self" = xyes; then
      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
          lt_cv_dlopen_self_static, [dnl
          _LT_TRY_DLOPEN_SELF(
            lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
            lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
      ])
    fi
 
    CPPFLAGS="$save_CPPFLAGS"
    LDFLAGS="$save_LDFLAGS"
    LIBS="$save_LIBS"
    ;;
  esac
 
  case $lt_cv_dlopen_self in
  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
  *) enable_dlopen_self=unknown ;;
  esac
 
  case $lt_cv_dlopen_self_static in
  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
  *) enable_dlopen_self_static=unknown ;;
  esac
fi
_LT_DECL([dlopen_support], [enable_dlopen], [0],
         [Whether dlopen is supported])
_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
         [Whether dlopen of programs is supported])
_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
         [Whether dlopen of statically linked programs is supported])
])# LT_SYS_DLOPEN_SELF
 
# Old name:
AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
 
 
# _LT_COMPILER_C_O([TAGNAME])
# ---------------------------
# Check to see if options -c and -o are simultaneously supported by compiler.
# This macro does not hard code the compiler like AC_PROG_CC_C_O.
m4_defun([_LT_COMPILER_C_O],
[AC_REQUIRE([AC_OBJEXT])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_TAG_COMPILER])dnl
AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
   $RM -r conftest 2>/dev/null
   mkdir conftest
   cd conftest
   mkdir out
   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
   lt_compiler_flag="-o out/conftest2.$ac_objext"
   # Insert the option either (1) after the last *FLAGS variable, or
   # (2) before a word containing "conftest.", or (3) at the end.
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
   (eval "$lt_compile" 2>out/conftest.err)
   ac_status=$?
   cat out/conftest.err >&AS_MESSAGE_LOG_FD
   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
   if (exit $ac_status) && test -s out/conftest2.$ac_objext
   then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
       _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
     fi
   fi
   chmod u+w . 2>&AS_MESSAGE_LOG_FD
   $RM conftest*
   # SGI C++ compiler will create directory out/ii_files/ for
   # template instantiation
   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
   $RM out/* && rmdir out
   cd ..
   $RM -r conftest
   $RM conftest*
])
_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
        [Does compiler simultaneously support -c and -o options?])
])# _LT_COMPILER_C_O
 
 
# _LT_COMPILER_FILE_LOCKS([TAGNAME])
# ----------------------------------
# Check to see if we can do hard links to lock some files if needed
m4_defun([_LT_COMPILER_FILE_LOCKS],
[m4_require([_LT_ENABLE_LOCK])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
_LT_COMPILER_C_O([$1])
 
hard_links="nottested"
if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
  # do not overwrite the value of need_locks provided by the user
  AC_MSG_CHECKING([if we can lock with hard links])
  hard_links=yes
  $RM conftest*
  ln conftest.a conftest.b 2>/dev/null && hard_links=no
  touch conftest.a
  ln conftest.a conftest.b 2>&5 || hard_links=no
  ln conftest.a conftest.b 2>/dev/null && hard_links=no
  AC_MSG_RESULT([$hard_links])
  if test "$hard_links" = no; then
    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
    need_locks=warn
  fi
else
  need_locks=no
fi
_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
])# _LT_COMPILER_FILE_LOCKS
 
 
# _LT_CHECK_OBJDIR
# ----------------
m4_defun([_LT_CHECK_OBJDIR],
[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
[rm -f .libs 2>/dev/null
mkdir .libs 2>/dev/null
if test -d .libs; then
  lt_cv_objdir=.libs
else
  # MS-DOS does not allow filenames that begin with a dot.
  lt_cv_objdir=_libs
fi
rmdir .libs 2>/dev/null])
objdir=$lt_cv_objdir
_LT_DECL([], [objdir], [0],
         [The name of the directory that contains temporary libtool files])dnl
m4_pattern_allow([LT_OBJDIR])dnl
AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
  [Define to the sub-directory in which libtool stores uninstalled libraries.])
])# _LT_CHECK_OBJDIR
 
 
# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
# --------------------------------------
# Check hardcoding attributes.
m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
[AC_MSG_CHECKING([how to hardcode library paths into programs])
_LT_TAGVAR(hardcode_action, $1)=
if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
   test -n "$_LT_TAGVAR(runpath_var, $1)" ||
   test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
 
  # We can hardcode non-existent directories.
  if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
     # If the only mechanism to avoid hardcoding is shlibpath_var, we
     # have to relink, otherwise we might link with an installed library
     # when we should be linking with a yet-to-be-installed one
     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
     test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
    # Linking always hardcodes the temporary library directory.
    _LT_TAGVAR(hardcode_action, $1)=relink
  else
    # We can link without hardcoding, and we can hardcode nonexisting dirs.
    _LT_TAGVAR(hardcode_action, $1)=immediate
  fi
else
  # We cannot hardcode anything, or else we can only hardcode existing
  # directories.
  _LT_TAGVAR(hardcode_action, $1)=unsupported
fi
AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
 
if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
   test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
  # Fast installation is not supported
  enable_fast_install=no
elif test "$shlibpath_overrides_runpath" = yes ||
     test "$enable_shared" = no; then
  # Fast installation is not necessary
  enable_fast_install=needless
fi
_LT_TAGDECL([], [hardcode_action], [0],
    [How to hardcode a shared library path into an executable])
])# _LT_LINKER_HARDCODE_LIBPATH
 
 
# _LT_CMD_STRIPLIB
# ----------------
m4_defun([_LT_CMD_STRIPLIB],
[m4_require([_LT_DECL_EGREP])
striplib=
old_striplib=
AC_MSG_CHECKING([whether stripping libraries is possible])
if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
  AC_MSG_RESULT([yes])
else
# FIXME - insert some real tests, host_os isn't really good enough
  case $host_os in
  darwin*)
    if test -n "$STRIP" ; then
      striplib="$STRIP -x"
      old_striplib="$STRIP -S"
      AC_MSG_RESULT([yes])
    else
      AC_MSG_RESULT([no])
    fi
    ;;
  *)
    AC_MSG_RESULT([no])
    ;;
  esac
fi
_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
_LT_DECL([], [striplib], [1])
])# _LT_CMD_STRIPLIB
 
 
# _LT_SYS_DYNAMIC_LINKER([TAG])
# -----------------------------
# PORTME Fill in your ld.so characteristics
m4_defun([_LT_SYS_DYNAMIC_LINKER],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_SED])dnl
AC_MSG_CHECKING([dynamic linker characteristics])
m4_case([$1],
        [C], [withGCC=$GCC],
        [CXX], [withGCC=$GXX],
        [F77], [withGCC=$G77],
        [FC], [withGCC=$ac_cv_fc_compiler_gnu],
        [GCJ], [withGCC=$GCC],
        [], [withGCC=$GCC
if test "$withGCC" = yes; then
  case $host_os in
    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
    *) lt_awk_arg="/^libraries:/" ;;
  esac
  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
    # if the path contains ";" then we assume it to be the separator
    # otherwise default to the standard path separator (i.e. ":") - it is
    # assumed that no part of a normal pathname contains ";" but that should
    # okay in the real world where ";" in dirpaths is itself problematic.
    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
  else
    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
  fi
  # Ok, now we have the path, separated by spaces, we can step through it
  # and add multilib dir if necessary.
  lt_tmp_lt_search_path_spec=
  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
  for lt_sys_path in $lt_search_path_spec; do
    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
    else
      test -d "$lt_sys_path" && \
        lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
    fi
  done
  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
BEGIN {RS=" "; FS="/|\n";} {
  lt_foo="";
  lt_count=0;
  for (lt_i = NF; lt_i > 0; lt_i--) {
    if ($lt_i != "" && $lt_i != ".") {
      if ($lt_i == "..") {
        lt_count++;
      } else {
        if (lt_count == 0) {
          lt_foo="/" $lt_i lt_foo;
        } else {
          lt_count--;
        }
      }
    }
  }
  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
}'`
  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
else
  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
fi],
[withGCC=$GCC])
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext_cmds=".so"
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
finish_eval=
shlibpath_var=
shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
need_lib_prefix=unknown
hardcode_into_libs=no
 
# when you set need_version to no, make sure it does not cause -set_version
# flags to be left without arguments
need_version=unknown
 
case $host_os in
aix3*)
  version_type=linux
  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
  shlibpath_var=LIBPATH
 
  # AIX 3 has no versioning support, so we append a major version to the name.
  soname_spec='${libname}${release}${shared_ext}$major'
  ;;
 
aix[[4-9]]*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  hardcode_into_libs=yes
  if test "$host_cpu" = ia64; then
    # AIX 5 supports IA64
    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
    shlibpath_var=LD_LIBRARY_PATH
  else
    # With GCC up to 2.95.x, collect2 would create an import file
    # for dependence libraries.  The import file would start with
    # the line `#! .'.  This would cause the generated library to
    # depend on `.', always an invalid library.  This was fixed in
    # development snapshots of GCC prior to 3.0.
    case $host_os in
      aix4 | aix4.[[01]] | aix4.[[01]].*)
      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
           echo ' yes '
           echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
        :
      else
        can_build_shared=no
      fi
      ;;
    esac
    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
    # soname into executable. Probably we can add versioning support to
    # collect2, so additional links can be useful in future.
    if test "$aix_use_runtimelinking" = yes; then
      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
      # instead of lib<name>.a to let people know that these are not
      # typical AIX shared libraries.
      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
    else
      # We preserve .a as extension for shared libraries through AIX4.2
      # and later when we are not doing run time linking.
      library_names_spec='${libname}${release}.a $libname.a'
      soname_spec='${libname}${release}${shared_ext}$major'
    fi
    shlibpath_var=LIBPATH
  fi
  ;;
 
amigaos*)
  if test "$host_cpu" = m68k; then
    library_names_spec='$libname.ixlibrary $libname.a'
    # Create ${libname}_ixlibrary.a entries in /sys/libs.
    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
  else
    dynamic_linker=no
  fi
  ;;
 
beos*)
  library_names_spec='${libname}${shared_ext}'
  dynamic_linker="$host_os ld.so"
  shlibpath_var=LIBRARY_PATH
  ;;
 
bsdi[[45]]*)
  version_type=linux
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
  # the default ld.so.conf also contains /usr/contrib/lib and
  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
  # libtool to hard-code these into programs
  ;;
 
cygwin* | mingw* | pw32*)
  version_type=windows
  shrext_cmds=".dll"
  need_version=no
  need_lib_prefix=no
 
  case $withGCC,$host_os in
  yes,cygwin* | yes,mingw* | yes,pw32*)
    library_names_spec='$libname.dll.a'
    # DLL is installed to $(libdir)/../bin by postinstall_cmds
    postinstall_cmds='base_file=`basename \${file}`~
      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
      dldir=$destdir/`dirname \$dlpath`~
      test -d \$dldir || mkdir -p \$dldir~
      $install_prog $dir/$dlname \$dldir/$dlname~
      chmod a+x \$dldir/$dlname~
      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
      fi'
    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
      dlpath=$dir/\$dldll~
       $RM \$dlpath'
    shlibpath_overrides_runpath=yes
 
    case $host_os in
    cygwin*)
      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
      ;;
    mingw*)
      # MinGW DLLs use traditional 'lib' prefix
      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
        # It is most probably a Windows format PATH printed by
        # mingw gcc, but we are running on Cygwin. Gcc prints its search
        # path with ; separators, and with drive letters. We can handle the
        # drive letters (cygwin fileutils understands them), so leave them,
        # especially as we might pass files found there to a mingw objdump,
        # which wouldn't understand a cygwinified path. Ahh.
        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
      else
        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
      fi
      ;;
    pw32*)
      # pw32 DLLs use 'pw' prefix rather than 'lib'
      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
      ;;
    esac
    ;;
 
  *)
    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
    ;;
  esac
  dynamic_linker='Win32 ld.exe'
  # FIXME: first we should search . and the directory the executable is in
  shlibpath_var=PATH
  ;;
 
darwin* | rhapsody*)
  dynamic_linker="$host_os dyld"
  version_type=darwin
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
  soname_spec='${libname}${release}${major}$shared_ext'
  shlibpath_overrides_runpath=yes
  shlibpath_var=DYLD_LIBRARY_PATH
  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
m4_if([$1], [],[
  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
  ;;
 
dgux*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
  soname_spec='${libname}${release}${shared_ext}$major'
  shlibpath_var=LD_LIBRARY_PATH
  ;;
 
freebsd1*)
  dynamic_linker=no
  ;;
 
freebsd* | dragonfly*)
  # DragonFly does not have aout.  When/if they implement a new
  # versioning mechanism, adjust this.
  if test -x /usr/bin/objformat; then
    objformat=`/usr/bin/objformat`
  else
    case $host_os in
    freebsd[[123]]*) objformat=aout ;;
    *) objformat=elf ;;
    esac
  fi
  version_type=freebsd-$objformat
  case $version_type in
    freebsd-elf*)
      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
      need_version=no
      need_lib_prefix=no
      ;;
    freebsd-*)
      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
      need_version=yes
      ;;
  esac
  shlibpath_var=LD_LIBRARY_PATH
  case $host_os in
  freebsd2*)
    shlibpath_overrides_runpath=yes
    ;;
  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
    shlibpath_overrides_runpath=yes
    hardcode_into_libs=yes
    ;;
  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
    shlibpath_overrides_runpath=no
    hardcode_into_libs=yes
    ;;
  *) # from 4.6 on, and DragonFly
    shlibpath_overrides_runpath=yes
    hardcode_into_libs=yes
    ;;
  esac
  ;;
 
gnu*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  shlibpath_var=LD_LIBRARY_PATH
  hardcode_into_libs=yes
  ;;
 
hpux9* | hpux10* | hpux11*)
  # Give a soname corresponding to the major version so that dld.sl refuses to
  # link against other versions.
  version_type=sunos
  need_lib_prefix=no
  need_version=no
  case $host_cpu in
  ia64*)
    shrext_cmds='.so'
    hardcode_into_libs=yes
    dynamic_linker="$host_os dld.so"
    shlibpath_var=LD_LIBRARY_PATH
    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
    soname_spec='${libname}${release}${shared_ext}$major'
    if test "X$HPUX_IA64_MODE" = X32; then
      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
    else
      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
    fi
    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
    ;;
  hppa*64*)
    shrext_cmds='.sl'
    hardcode_into_libs=yes
    dynamic_linker="$host_os dld.sl"
    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
    soname_spec='${libname}${release}${shared_ext}$major'
    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
    ;;
  *)
    shrext_cmds='.sl'
    dynamic_linker="$host_os dld.sl"
    shlibpath_var=SHLIB_PATH
    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
    soname_spec='${libname}${release}${shared_ext}$major'
    ;;
  esac
  # HP-UX runs *really* slowly unless shared libraries are mode 555.
  postinstall_cmds='chmod 555 $lib'
  ;;
 
interix[[3-9]]*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=no
  hardcode_into_libs=yes
  ;;
 
irix5* | irix6* | nonstopux*)
  case $host_os in
    nonstopux*) version_type=nonstopux ;;
    *)
        if test "$lt_cv_prog_gnu_ld" = yes; then
                version_type=linux
        else
                version_type=irix
        fi ;;
  esac
  need_lib_prefix=no
  need_version=no
  soname_spec='${libname}${release}${shared_ext}$major'
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
  case $host_os in
  irix5* | nonstopux*)
    libsuff= shlibsuff=
    ;;
  *)
    case $LD in # libtool.m4 will add one of these switches to LD
    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
      libsuff= shlibsuff= libmagic=32-bit;;
    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
      libsuff=32 shlibsuff=N32 libmagic=N32;;
    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
      libsuff=64 shlibsuff=64 libmagic=64-bit;;
    *) libsuff= shlibsuff= libmagic=never-match;;
    esac
    ;;
  esac
  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
  shlibpath_overrides_runpath=no
  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
  hardcode_into_libs=yes
  ;;
 
# No shared lib support for Linux oldld, aout, or coff.
linux*oldld* | linux*aout* | linux*coff*)
  dynamic_linker=no
  ;;
 
# This must be Linux ELF.
linux* | k*bsd*-gnu)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=no
  # Some binutils ld are patched to set DT_RUNPATH
  save_LDFLAGS=$LDFLAGS
  save_libdir=$libdir
  eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
       LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
  AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
    [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir"],
       [shlibpath_overrides_runpath=yes])])
  LDFLAGS=$save_LDFLAGS
  libdir=$save_libdir
 
  # This implies no fast_install, which is unacceptable.
  # Some rework will be needed to allow for fast_install
  # before this can be enabled.
  hardcode_into_libs=yes
 
  # Append ld.so.conf contents to the search path
  if test -f /etc/ld.so.conf; then
    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,        ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
  fi
 
  # We used to test for /lib/ld.so.1 and disable shared libraries on
  # powerpc, because MkLinux only supported shared libraries with the
  # GNU dynamic linker.  Since this was broken with cross compilers,
  # most powerpc-linux boxes support dynamic linking these days and
  # people can always --disable-shared, the test was removed, and we
  # assume the GNU/Linux dynamic linker is in use.
  dynamic_linker='GNU/Linux ld.so'
  ;;
 
netbsd*)
  version_type=sunos
  need_lib_prefix=no
  need_version=no
  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
    dynamic_linker='NetBSD (a.out) ld.so'
  else
    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
    soname_spec='${libname}${release}${shared_ext}$major'
    dynamic_linker='NetBSD ld.elf_so'
  fi
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  hardcode_into_libs=yes
  ;;
 
newsos6)
  version_type=linux
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  ;;
 
*nto* | *qnx*)
  version_type=qnx
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=no
  hardcode_into_libs=yes
  dynamic_linker='ldqnx.so'
  ;;
 
openbsd*)
  version_type=sunos
  sys_lib_dlsearch_path_spec="/usr/lib"
  need_lib_prefix=no
  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
  case $host_os in
    openbsd3.3 | openbsd3.3.*)  need_version=yes ;;
    *)                          need_version=no  ;;
  esac
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
    case $host_os in
      openbsd2.[[89]] | openbsd2.[[89]].*)
        shlibpath_overrides_runpath=no
        ;;
      *)
        shlibpath_overrides_runpath=yes
        ;;
      esac
  else
    shlibpath_overrides_runpath=yes
  fi
  ;;
 
os2*)
  libname_spec='$name'
  shrext_cmds=".dll"
  need_lib_prefix=no
  library_names_spec='$libname${shared_ext} $libname.a'
  dynamic_linker='OS/2 ld.exe'
  shlibpath_var=LIBPATH
  ;;
 
osf3* | osf4* | osf5*)
  version_type=osf
  need_lib_prefix=no
  need_version=no
  soname_spec='${libname}${release}${shared_ext}$major'
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  shlibpath_var=LD_LIBRARY_PATH
  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
  ;;
 
rdos*)
  dynamic_linker=no
  ;;
 
solaris*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  hardcode_into_libs=yes
  # ldd complains unless libraries are executable
  postinstall_cmds='chmod +x $lib'
  ;;
 
sunos4*)
  version_type=sunos
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  if test "$with_gnu_ld" = yes; then
    need_lib_prefix=no
  fi
  need_version=yes
  ;;
 
sysv4 | sysv4.3*)
  version_type=linux
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  shlibpath_var=LD_LIBRARY_PATH
  case $host_vendor in
    sni)
      shlibpath_overrides_runpath=no
      need_lib_prefix=no
      runpath_var=LD_RUN_PATH
      ;;
    siemens)
      need_lib_prefix=no
      ;;
    motorola)
      need_lib_prefix=no
      need_version=no
      shlibpath_overrides_runpath=no
      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
      ;;
  esac
  ;;
 
sysv4*MP*)
  if test -d /usr/nec ;then
    version_type=linux
    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
    soname_spec='$libname${shared_ext}.$major'
    shlibpath_var=LD_LIBRARY_PATH
  fi
  ;;
 
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
  version_type=freebsd-elf
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  hardcode_into_libs=yes
  if test "$with_gnu_ld" = yes; then
    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
  else
    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
    case $host_os in
      sco3.2v5*)
        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
        ;;
    esac
  fi
  sys_lib_dlsearch_path_spec='/usr/lib'
  ;;
 
tpf*)
  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_name_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=no
  hardcode_into_libs=yes
  ;;
 
uts4*)
  version_type=linux
  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
  soname_spec='${libname}${release}${shared_ext}$major'
  shlibpath_var=LD_LIBRARY_PATH
  ;;
 
*)
  dynamic_linker=no
  ;;
esac
AC_MSG_RESULT([$dynamic_linker])
test "$dynamic_linker" = no && can_build_shared=no
 
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
if test "$GCC" = yes; then
  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
 
_LT_DECL([], [variables_saved_for_relink], [1],
    [Variables whose values should be saved in libtool wrapper scripts and
    restored at link time])
_LT_DECL([], [need_lib_prefix], [0],
    [Do we need the "lib" prefix for modules?])
_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
_LT_DECL([], [version_type], [0], [Library versioning type])
_LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
_LT_DECL([], [shlibpath_overrides_runpath], [0],
    [Is shlibpath searched before the hard-coded library search path?])
_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
_LT_DECL([], [library_names_spec], [1],
    [[List of archive names.  First name is the real one, the rest are links.
    The last name is the one that the linker finds with -lNAME]])
_LT_DECL([], [soname_spec], [1],
    [[The coded name of the library, if different from the real name]])
_LT_DECL([], [postinstall_cmds], [2],
    [Command to use after installation of a shared archive])
_LT_DECL([], [postuninstall_cmds], [2],
    [Command to use after uninstallation of a shared archive])
_LT_DECL([], [finish_cmds], [2],
    [Commands used to finish a libtool library installation in a directory])
_LT_DECL([], [finish_eval], [1],
    [[As "finish_cmds", except a single script fragment to be evaled but
    not shown]])
_LT_DECL([], [hardcode_into_libs], [0],
    [Whether we should hardcode library paths into libraries])
_LT_DECL([], [sys_lib_search_path_spec], [2],
    [Compile-time system search path for libraries])
_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
    [Run-time system search path for libraries])
])# _LT_SYS_DYNAMIC_LINKER
 
 
# _LT_PATH_TOOL_PREFIX(TOOL)
# --------------------------
# find a file program which can recognize shared library
AC_DEFUN([_LT_PATH_TOOL_PREFIX],
[m4_require([_LT_DECL_EGREP])dnl
AC_MSG_CHECKING([for $1])
AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
[case $MAGIC_CMD in
[[\\/*] |  ?:[\\/]*])
  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
  ;;
*)
  lt_save_MAGIC_CMD="$MAGIC_CMD"
  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
dnl $ac_dummy forces splitting on constant user-supplied paths.
dnl POSIX.2 word splitting is done only on the output of word expansions,
dnl not every word.  This closes a longstanding sh security hole.
  ac_dummy="m4_if([$2], , $PATH, [$2])"
  for ac_dir in $ac_dummy; do
    IFS="$lt_save_ifs"
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$1; then
      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
      if test -n "$file_magic_test_file"; then
        case $deplibs_check_method in
        "file_magic "*)
          file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
          MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
          if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
            $EGREP "$file_magic_regex" > /dev/null; then
            :
          else
            cat <<_LT_EOF 1>&2
 
*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such.  This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem.  Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org
 
_LT_EOF
          fi ;;
        esac
      fi
      break
    fi
  done
  IFS="$lt_save_ifs"
  MAGIC_CMD="$lt_save_MAGIC_CMD"
  ;;
esac])
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if test -n "$MAGIC_CMD"; then
  AC_MSG_RESULT($MAGIC_CMD)
else
  AC_MSG_RESULT(no)
fi
_LT_DECL([], [MAGIC_CMD], [0],
         [Used to examine libraries when file_magic_cmd begins with "file"])dnl
])# _LT_PATH_TOOL_PREFIX
 
# Old name:
AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
 
 
# _LT_PATH_MAGIC
# --------------
# find a file program which can recognize a shared library
m4_defun([_LT_PATH_MAGIC],
[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
if test -z "$lt_cv_path_MAGIC_CMD"; then
  if test -n "$ac_tool_prefix"; then
    _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
  else
    MAGIC_CMD=:
  fi
fi
])# _LT_PATH_MAGIC
 
 
# LT_PATH_LD
# ----------
# find the pathname to the GNU or non-GNU linker
AC_DEFUN([LT_PATH_LD],
[AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_DECL_EGREP])dnl
 
AC_ARG_WITH([gnu-ld],
    [AS_HELP_STRING([--with-gnu-ld],
        [assume the C compiler uses GNU ld @<:@default=no@:>@])],
    [test "$withval" = no || with_gnu_ld=yes],
    [with_gnu_ld=no])dnl
 
ac_prog=ld
if test "$GCC" = yes; then
  # Check if gcc -print-prog-name=ld gives a path.
  AC_MSG_CHECKING([for ld used by $CC])
  case $host in
  *-*-mingw*)
    # gcc leaves a trailing carriage return which upsets mingw
    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
  *)
    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
  esac
  case $ac_prog in
    # Accept absolute paths.
    [[\\/]]* | ?:[[\\/]]*)
      re_direlt='/[[^/]][[^/]]*/\.\./'
      # Canonicalize the pathname of ld
      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
        ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
      done
      test -z "$LD" && LD="$ac_prog"
      ;;
  "")
    # If it fails, then pretend we aren't using GCC.
    ac_prog=ld
    ;;
  *)
    # If it is relative, then search for the first ld in PATH.
    with_gnu_ld=unknown
    ;;
  esac
elif test "$with_gnu_ld" = yes; then
  AC_MSG_CHECKING([for GNU ld])
else
  AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(lt_cv_path_LD,
[if test -z "$LD"; then
  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
  for ac_dir in $PATH; do
    IFS="$lt_save_ifs"
    test -z "$ac_dir" && ac_dir=.
    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
      lt_cv_path_LD="$ac_dir/$ac_prog"
      # Check to see if the program is GNU ld.  I'd rather use --version,
      # but apparently some variants of GNU ld only accept -v.
      # Break only if it was the GNU/non-GNU ld that we prefer.
      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
      *GNU* | *'with BFD'*)
        test "$with_gnu_ld" != no && break
        ;;
      *)
        test "$with_gnu_ld" != yes && break
        ;;
      esac
    fi
  done
  IFS="$lt_save_ifs"
else
  lt_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$lt_cv_path_LD"
if test -n "$LD"; then
  AC_MSG_RESULT($LD)
else
  AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
_LT_PATH_LD_GNU
AC_SUBST([LD])
 
_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
])# LT_PATH_LD
 
# Old names:
AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AM_PROG_LD], [])
dnl AC_DEFUN([AC_PROG_LD], [])
 
 
# _LT_PATH_LD_GNU
#- --------------
m4_defun([_LT_PATH_LD_GNU],
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU lds only accept -v.
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
  lt_cv_prog_gnu_ld=yes
  ;;
*)
  lt_cv_prog_gnu_ld=no
  ;;
esac])
with_gnu_ld=$lt_cv_prog_gnu_ld
])# _LT_PATH_LD_GNU
 
 
# _LT_CMD_RELOAD
# --------------
# find reload flag for linker
#   -- PORTME Some linkers may need a different reload flag.
m4_defun([_LT_CMD_RELOAD],
[AC_CACHE_CHECK([for $LD option to reload object files],
  lt_cv_ld_reload_flag,
  [lt_cv_ld_reload_flag='-r'])
reload_flag=$lt_cv_ld_reload_flag
case $reload_flag in
"" | " "*) ;;
*) reload_flag=" $reload_flag" ;;
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
  darwin*)
    if test "$GCC" = yes; then
      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
    else
      reload_cmds='$LD$reload_flag -o $output$reload_objs'
    fi
    ;;
esac
_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
_LT_DECL([], [reload_cmds], [2])dnl
])# _LT_CMD_RELOAD
 
 
# _LT_CHECK_MAGIC_METHOD
# ----------------------
# how to check for library dependencies
#  -- PORTME fill in with the dynamic library characteristics
m4_defun([_LT_CHECK_MAGIC_METHOD],
[m4_require([_LT_DECL_EGREP])
AC_CACHE_CHECK([how to recognize dependent libraries],
lt_cv_deplibs_check_method,
[lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_deplibs_check_method='unknown'
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
# `unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [[regex]]' -- check by looking for files in library path
# which responds to the $file_magic_cmd with a given extended regex.
# If you have `file' or equivalent on your system and you're not sure
# whether `pass_all' will *always* work, you probably want this one.
 
case $host_os in
aix[[4-9]]*)
  lt_cv_deplibs_check_method=pass_all
  ;;
 
beos*)
  lt_cv_deplibs_check_method=pass_all
  ;;
 
bsdi[[45]]*)
  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
  lt_cv_file_magic_cmd='/usr/bin/file -L'
  lt_cv_file_magic_test_file=/shlib/libc.so
  ;;
 
cygwin*)
  # func_win32_libid is a shell function defined in ltmain.sh
  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
  lt_cv_file_magic_cmd='func_win32_libid'
  ;;
 
mingw* | pw32*)
  # Base MSYS/MinGW do not provide the 'file' command needed by
  # func_win32_libid shell function, so use a weaker test based on 'objdump',
  # unless we find 'file', for example because we are cross-compiling.
  if ( file / ) >/dev/null 2>&1; then
    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
    lt_cv_file_magic_cmd='func_win32_libid'
  else
    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
    lt_cv_file_magic_cmd='$OBJDUMP -f'
  fi
  ;;
 
darwin* | rhapsody*)
  lt_cv_deplibs_check_method=pass_all
  ;;
 
freebsd* | dragonfly*)
  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
    case $host_cpu in
    i*86 )
      # Not sure whether the presence of OpenBSD here was a mistake.
      # Let's accept both of them until this is cleared up.
      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
      lt_cv_file_magic_cmd=/usr/bin/file
      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
      ;;
    esac
  else
    lt_cv_deplibs_check_method=pass_all
  fi
  ;;
 
gnu*)
  lt_cv_deplibs_check_method=pass_all
  ;;
 
hpux10.20* | hpux11*)
  lt_cv_file_magic_cmd=/usr/bin/file
  case $host_cpu in
  ia64*)
    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
    ;;
  hppa*64*)
    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
    ;;
  *)
    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
    lt_cv_file_magic_test_file=/usr/lib/libc.sl
    ;;
  esac
  ;;
 
interix[[3-9]]*)
  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
  ;;
 
irix5* | irix6* | nonstopux*)
  case $LD in
  *-32|*"-32 ") libmagic=32-bit;;
  *-n32|*"-n32 ") libmagic=N32;;
  *-64|*"-64 ") libmagic=64-bit;;
  *) libmagic=never-match;;
  esac
  lt_cv_deplibs_check_method=pass_all
  ;;
 
# This must be Linux ELF.
linux* | k*bsd*-gnu)
  lt_cv_deplibs_check_method=pass_all
  ;;
 
netbsd*)
  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
  else
    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
  fi
  ;;
 
newos6*)
  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
  lt_cv_file_magic_cmd=/usr/bin/file
  lt_cv_file_magic_test_file=/usr/lib/libnls.so
  ;;
 
*nto* | *qnx*)
  lt_cv_deplibs_check_method=pass_all
  ;;
 
openbsd*)
  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
  else
    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
  fi
  ;;
 
osf3* | osf4* | osf5*)
  lt_cv_deplibs_check_method=pass_all
  ;;
 
rdos*)
  lt_cv_deplibs_check_method=pass_all
  ;;
 
solaris*)
  lt_cv_deplibs_check_method=pass_all
  ;;
 
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
  lt_cv_deplibs_check_method=pass_all
  ;;
 
sysv4 | sysv4.3*)
  case $host_vendor in
  motorola)
    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
    ;;
  ncr)
    lt_cv_deplibs_check_method=pass_all
    ;;
  sequent)
    lt_cv_file_magic_cmd='/bin/file'
    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
    ;;
  sni)
    lt_cv_file_magic_cmd='/bin/file'
    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
    lt_cv_file_magic_test_file=/lib/libc.so
    ;;
  siemens)
    lt_cv_deplibs_check_method=pass_all
    ;;
  pc)
    lt_cv_deplibs_check_method=pass_all
    ;;
  esac
  ;;
 
tpf*)
  lt_cv_deplibs_check_method=pass_all
  ;;
esac
])
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
test -z "$deplibs_check_method" && deplibs_check_method=unknown
 
_LT_DECL([], [deplibs_check_method], [1],
    [Method to check whether dependent libraries are shared objects])
_LT_DECL([], [file_magic_cmd], [1],
    [Command to use when deplibs_check_method == "file_magic"])
])# _LT_CHECK_MAGIC_METHOD
 
 
# LT_PATH_NM
# ----------
# find the pathname to a BSD- or MS-compatible name lister
AC_DEFUN([LT_PATH_NM],
[AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_OBJEXT])dnl
AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
[if test -n "$NM"; then
  # Let the user override the test.
  lt_cv_path_NM="$NM"
else
  lt_nm_to_check="${ac_tool_prefix}nm"
  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
    lt_nm_to_check="$lt_nm_to_check nm"
  fi
  for lt_tmp_nm in $lt_nm_to_check; do
    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
      IFS="$lt_save_ifs"
      test -z "$ac_dir" && ac_dir=.
      tmp_nm="$ac_dir/$lt_tmp_nm"
      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
        # Check to see if the nm accepts a BSD-compat flag.
        # Adding the `sed 1q' prevents false positives on HP-UX, which says:
        #   nm: unknown option "B" ignored
        # Tru64's nm complains that /dev/null is an invalid object file
        case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
        */dev/null* | *'Invalid file or object type'*)
          lt_cv_path_NM="$tmp_nm -B"
          break
          ;;
        *)
          case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
          */dev/null*)
            lt_cv_path_NM="$tmp_nm -p"
            break
            ;;
          *)
            lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
            continue # so that we can try to find one that supports BSD flags
            ;;
          esac
          ;;
        esac
      fi
    done
    IFS="$lt_save_ifs"
  done
  : ${lt_cv_path_NM=no}
fi])
if test "$lt_cv_path_NM" != "no"; then
  NM="$lt_cv_path_NM"
else
  # Didn't find any BSD compatible name lister, look for dumpbin.
  AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
  AC_SUBST([DUMPBIN])
  if test "$DUMPBIN" != ":"; then
    NM="$DUMPBIN"
  fi
fi
test -z "$NM" && NM=nm
AC_SUBST([NM])
_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
 
AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
  [lt_cv_nm_interface="BSD nm"
  echo "int some_variable = 0;" > conftest.$ac_ext
  (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
  (eval "$ac_compile" 2>conftest.err)
  cat conftest.err >&AS_MESSAGE_LOG_FD
  (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
  cat conftest.err >&AS_MESSAGE_LOG_FD
  (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
  cat conftest.out >&AS_MESSAGE_LOG_FD
  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
    lt_cv_nm_interface="MS dumpbin"
  fi
  rm -f conftest*])
])# LT_PATH_NM
 
# Old names:
AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AM_PROG_NM], [])
dnl AC_DEFUN([AC_PROG_NM], [])
 
 
# LT_LIB_M
# --------
# check for math library
AC_DEFUN([LT_LIB_M],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case $host in
*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
  # These system don't have libm, or don't need it
  ;;
*-ncr-sysv4.3*)
  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
  ;;
*)
  AC_CHECK_LIB(m, cos, LIBM="-lm")
  ;;
esac
AC_SUBST([LIBM])
])# LT_LIB_M
 
# Old name:
AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_CHECK_LIBM], [])
 
 
# _LT_COMPILER_NO_RTTI([TAGNAME])
# -------------------------------
m4_defun([_LT_COMPILER_NO_RTTI],
[m4_require([_LT_TAG_COMPILER])dnl
 
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
 
if test "$GCC" = yes; then
  _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
 
  _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
    lt_cv_prog_compiler_rtti_exceptions,
    [-fno-rtti -fno-exceptions], [],
    [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
fi
_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
        [Compiler flag to turn off builtin functions])
])# _LT_COMPILER_NO_RTTI
 
 
# _LT_CMD_GLOBAL_SYMBOLS
# ----------------------
m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_OBJEXT])dnl
AC_REQUIRE([LT_PATH_NM])dnl
AC_REQUIRE([LT_PATH_LD])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_TAG_COMPILER])dnl
 
# Check for command to grab the raw symbol name followed by C symbol from nm.
AC_MSG_CHECKING([command to parse $NM output from $compiler object])
AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
[
# These are sane defaults that work on at least a few old systems.
# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
 
# Character class describing NM global symbol codes.
symcode='[[BCDEGRST]]'
 
# Regexp to match symbols that can be accessed directly from C.
sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
 
# Define system-specific variables.
case $host_os in
aix*)
  symcode='[[BCDT]]'
  ;;
cygwin* | mingw* | pw32*)
  symcode='[[ABCDGISTW]]'
  ;;
hpux*)
  if test "$host_cpu" = ia64; then
    symcode='[[ABCDEGRST]]'
  fi
  ;;
irix* | nonstopux*)
  symcode='[[BCDEGRST]]'
  ;;
osf*)
  symcode='[[BCDEGQRST]]'
  ;;
solaris*)
  symcode='[[BDRT]]'
  ;;
sco3.2v5*)
  symcode='[[DT]]'
  ;;
sysv4.2uw2*)
  symcode='[[DT]]'
  ;;
sysv5* | sco5v6* | unixware* | OpenUNIX*)
  symcode='[[ABDT]]'
  ;;
sysv4)
  symcode='[[DFNSTU]]'
  ;;
esac
 
# If we're using GNU nm, then use its standard symbol codes.
case `$NM -V 2>&1` in
*GNU* | *'with BFD'*)
  symcode='[[ABCDGIRSTW]]' ;;
esac
 
# Transform an extracted symbol line into a proper C declaration.
# Some systems (esp. on ia64) link data and code symbols differently,
# so use this general approach.
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
 
# Transform an extracted symbol line into symbol name and symbol address
lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
 
# Handle CRLF in mingw tool chain
opt_cr=
case $build_os in
mingw*)
  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
  ;;
esac
 
# Try without a prefix underscore, then with it.
for ac_symprfx in "" "_"; do
 
  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
  symxfrm="\\1 $ac_symprfx\\2 \\2"
 
  # Write the raw and C identifiers.
  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
    # Fake it for dumpbin and say T for any non-static function
    # and D for any global variable.
    # Also find C++ and __fastcall symbols from MSVC++,
    # which start with @ or ?.
    lt_cv_sys_global_symbol_pipe="$AWK ['"\
"     {last_section=section; section=\$ 3};"\
"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
"     \$ 0!~/External *\|/{next};"\
"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
"     {if(hide[section]) next};"\
"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
"     ' prfx=^$ac_symprfx]"
  else
    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[     ]]\($symcode$symcode*\)[[       ]][[    ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
  fi
 
  # Check to see that the pipe works correctly.
  pipe_works=no
 
  rm -f conftest*
  cat > conftest.$ac_ext <<_LT_EOF
#ifdef __cplusplus
extern "C" {
#endif
char nm_test_var;
void nm_test_func(void);
void nm_test_func(void){}
#ifdef __cplusplus
}
#endif
int main(){nm_test_var='a';nm_test_func();return(0);}
_LT_EOF
 
  if AC_TRY_EVAL(ac_compile); then
    # Now try to grab the symbols.
    nlist=conftest.nm
    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
      # Try sorting and uniquifying the output.
      if sort "$nlist" | uniq > "$nlist"T; then
        mv -f "$nlist"T "$nlist"
      else
        rm -f "$nlist"T
      fi
 
      # Make sure that we snagged all the symbols we need.
      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
        if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
          cat <<_LT_EOF > conftest.$ac_ext
#ifdef __cplusplus
extern "C" {
#endif
 
_LT_EOF
          # Now generate the symbol file.
          eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
 
          cat <<_LT_EOF >> conftest.$ac_ext
 
/* The mapping between symbol names and symbols.  */
const struct {
  const char *name;
  void       *address;
}
lt__PROGRAM__LTX_preloaded_symbols[[]] =
{
  { "@PROGRAM@", (void *) 0 },
_LT_EOF
          $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
          cat <<\_LT_EOF >> conftest.$ac_ext
  {0, (void *) 0}
};
 
/* This works around a problem in FreeBSD linker */
#ifdef FREEBSD_WORKAROUND
static const void *lt_preloaded_setup() {
  return lt__PROGRAM__LTX_preloaded_symbols;
}
#endif
 
#ifdef __cplusplus
}
#endif
_LT_EOF
          # Now try linking the two files.
          mv conftest.$ac_objext conftstm.$ac_objext
          lt_save_LIBS="$LIBS"
          lt_save_CFLAGS="$CFLAGS"
          LIBS="conftstm.$ac_objext"
          CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
          if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
            pipe_works=yes
          fi
          LIBS="$lt_save_LIBS"
          CFLAGS="$lt_save_CFLAGS"
        else
          echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
        fi
      else
        echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
      fi
    else
      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
    fi
  else
    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
    cat conftest.$ac_ext >&5
  fi
  rm -f conftest* conftst*
 
  # Do not use the global_symbol_pipe unless it works.
  if test "$pipe_works" = yes; then
    break
  else
    lt_cv_sys_global_symbol_pipe=
  fi
done
])
if test -z "$lt_cv_sys_global_symbol_pipe"; then
  lt_cv_sys_global_symbol_to_cdecl=
fi
if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
  AC_MSG_RESULT(failed)
else
  AC_MSG_RESULT(ok)
fi
 
_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
    [Take the output of nm and produce a listing of raw symbols and C names])
_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
    [Transform the output of nm in a proper C declaration])
_LT_DECL([global_symbol_to_c_name_address],
    [lt_cv_sys_global_symbol_to_c_name_address], [1],
    [Transform the output of nm in a C name address pair])
]) # _LT_CMD_GLOBAL_SYMBOLS
 
 
# _LT_COMPILER_PIC([TAGNAME])
# ---------------------------
m4_defun([_LT_COMPILER_PIC],
[m4_require([_LT_TAG_COMPILER])dnl
_LT_TAGVAR(lt_prog_compiler_wl, $1)=
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_TAGVAR(lt_prog_compiler_static, $1)=
 
AC_MSG_CHECKING([for $compiler option to produce PIC])
m4_if([$1], [CXX], [
  # C++ specific cases for pic, static, wl, etc.
  if test "$GXX" = yes; then
    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 
    case $host_os in
    aix*)
      # All AIX code is PIC.
      if test "$host_cpu" = ia64; then
        # AIX 5 now supports IA64 processor
        _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      fi
      ;;
    amigaos*)
      if test "$host_cpu" = m68k; then
        # FIXME: we need at least 68020 code to build shared libraries, but
        # adding the `-m68020' flag to GCC prevents building anything better,
        # like `-m68040'.
        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
      fi
      ;;
    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
      # PIC is the default for these OSes.
      ;;
    mingw* | cygwin* | os2* | pw32*)
      # This hack is so that the source file can tell whether it is being
      # built for inclusion in a dll (and should export symbols for example).
      # Although the cygwin gcc ignores -fPIC, still need this for old-style
      # (--disable-auto-import) libraries
      m4_if([$1], [GCJ], [],
        [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
      ;;
    darwin* | rhapsody*)
      # PIC is the default on this platform
      # Common symbols not allowed in MH_DYLIB files
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
      ;;
    *djgpp*)
      # DJGPP does not support shared libraries at all
      _LT_TAGVAR(lt_prog_compiler_pic, $1)=
      ;;
    interix[[3-9]]*)
      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
      # Instead, we relocate shared libraries at runtime.
      ;;
    sysv4*MP*)
      if test -d /usr/nec; then
        _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
      fi
      ;;
    hpux*)
      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
      # not for PA HP-UX.
      case $host_cpu in
      hppa*64*|ia64*)
        ;;
      *)
        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
        ;;
      esac
      ;;
    *qnx* | *nto*)
      # QNX uses GNU C++, but need to define -shared option too, otherwise
      # it will coredump.
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
      ;;
    *)
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
      ;;
    esac
  else
    case $host_os in
      aix[[4-9]]*)
        # All AIX code is PIC.
        if test "$host_cpu" = ia64; then
          # AIX 5 now supports IA64 processor
          _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
        else
          _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
        fi
        ;;
      chorus*)
        case $cc_basename in
        cxch68*)
          # Green Hills C++ Compiler
          # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
          ;;
        esac
        ;;
      darwin*)
        # PIC is the default on this platform
        # Common symbols not allowed in MH_DYLIB files
        case $cc_basename in
          xlc*)
          _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
          _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
          ;;
        esac
        ;;
      dgux*)
        case $cc_basename in
          ec++*)
            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
            ;;
          ghcx*)
            # Green Hills C++ Compiler
            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
            ;;
          *)
            ;;
        esac
        ;;
      freebsd* | dragonfly*)
        # FreeBSD uses GNU C++
        ;;
      hpux9* | hpux10* | hpux11*)
        case $cc_basename in
          CC*)
            _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
            _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
            if test "$host_cpu" != ia64; then
              _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
            fi
            ;;
          aCC*)
            _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
            _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
            case $host_cpu in
            hppa*64*|ia64*)
              # +Z the default
              ;;
            *)
              _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
              ;;
            esac
            ;;
          *)
            ;;
        esac
        ;;
      interix*)
        # This is c89, which is MS Visual C++ (no shared libs)
        # Anyone wants to do a port?
        ;;
      irix5* | irix6* | nonstopux*)
        case $cc_basename in
          CC*)
            _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
            _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
            # CC pic flag -KPIC is the default.
            ;;
          *)
            ;;
        esac
        ;;
      linux* | k*bsd*-gnu)
        case $cc_basename in
          KCC*)
            # KAI C++ Compiler
            _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
            ;;
          icpc* | ecpc* )
            # Intel C++
            _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
            _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
            ;;
          pgCC*)
            # Portland Group C++ compiler
            _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
            _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
            ;;
          cxx*)
            # Compaq C++
            # Make sure the PIC flag is empty.  It appears that all Alpha
            # Linux and Compaq Tru64 Unix objects are PIC.
            _LT_TAGVAR(lt_prog_compiler_pic, $1)=
            _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
            ;;
          *)
            case `$CC -V 2>&1 | sed 5q` in
            *Sun\ C*)
              # Sun C++ 5.9
              _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
              _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
              _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
              ;;
            esac
            ;;
        esac
        ;;
      lynxos*)
        ;;
      m88k*)
        ;;
      mvs*)
        case $cc_basename in
          cxx*)
            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
            ;;
          *)
            ;;
        esac
        ;;
      netbsd*)
        ;;
      *qnx* | *nto*)
        # QNX uses GNU C++, but need to define -shared option too, otherwise
        # it will coredump.
        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
        ;;
      osf3* | osf4* | osf5*)
        case $cc_basename in
          KCC*)
            _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
            ;;
          RCC*)
            # Rational C++ 2.4.1
            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
            ;;
          cxx*)
            # Digital/Compaq C++
            _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
            # Make sure the PIC flag is empty.  It appears that all Alpha
            # Linux and Compaq Tru64 Unix objects are PIC.
            _LT_TAGVAR(lt_prog_compiler_pic, $1)=
            _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
            ;;
          *)
            ;;
        esac
        ;;
      psos*)
        ;;
      solaris*)
        case $cc_basename in
          CC*)
            # Sun C++ 4.2, 5.x and Centerline C++
            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
            _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
            _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
            ;;
          gcx*)
            # Green Hills C++ Compiler
            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
            ;;
          *)
            ;;
        esac
        ;;
      sunos4*)
        case $cc_basename in
          CC*)
            # Sun C++ 4.x
            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
            _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
            ;;
          lcc*)
            # Lucid
            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
            ;;
          *)
            ;;
        esac
        ;;
      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
        case $cc_basename in
          CC*)
            _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
            _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
            ;;
        esac
        ;;
      tandem*)
        case $cc_basename in
          NCC*)
            # NonStop-UX NCC 3.20
            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
            ;;
          *)
            ;;
        esac
        ;;
      vxworks*)
        ;;
      *)
        _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
        ;;
    esac
  fi
],
[
  if test "$GCC" = yes; then
    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 
    case $host_os in
      aix*)
      # All AIX code is PIC.
      if test "$host_cpu" = ia64; then
        # AIX 5 now supports IA64 processor
        _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      fi
      ;;
 
    amigaos*)
      if test "$host_cpu" = m68k; then
        # FIXME: we need at least 68020 code to build shared libraries, but
        # adding the `-m68020' flag to GCC prevents building anything better,
        # like `-m68040'.
        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
      fi
      ;;
 
    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
      # PIC is the default for these OSes.
      ;;
 
    mingw* | cygwin* | pw32* | os2*)
      # This hack is so that the source file can tell whether it is being
      # built for inclusion in a dll (and should export symbols for example).
      # Although the cygwin gcc ignores -fPIC, still need this for old-style
      # (--disable-auto-import) libraries
      m4_if([$1], [GCJ], [],
        [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
      ;;
 
    darwin* | rhapsody*)
      # PIC is the default on this platform
      # Common symbols not allowed in MH_DYLIB files
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
      ;;
 
    hpux*)
      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
      # not for PA HP-UX.
      case $host_cpu in
      hppa*64*|ia64*)
        # +Z the default
        ;;
      *)
        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
        ;;
      esac
      ;;
 
    interix[[3-9]]*)
      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
      # Instead, we relocate shared libraries at runtime.
      ;;
 
    msdosdjgpp*)
      # Just because we use GCC doesn't mean we suddenly get shared libraries
      # on systems that don't support them.
      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
      enable_shared=no
      ;;
 
    *nto* | *qnx*)
      # QNX uses GNU C++, but need to define -shared option too, otherwise
      # it will coredump.
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
      ;;
 
    sysv4*MP*)
      if test -d /usr/nec; then
        _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
      fi
      ;;
 
    *)
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
      ;;
    esac
  else
    # PORTME Check for flag to pass linker flags through the system compiler.
    case $host_os in
    aix*)
      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
      if test "$host_cpu" = ia64; then
        # AIX 5 now supports IA64 processor
        _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      else
        _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
      fi
      ;;
    darwin*)
      # PIC is the default on this platform
      # Common symbols not allowed in MH_DYLIB files
      case $cc_basename in
      xlc*)
        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
        ;;
      esac
      ;;
 
    mingw* | cygwin* | pw32* | os2*)
      # This hack is so that the source file can tell whether it is being
      # built for inclusion in a dll (and should export symbols for example).
      m4_if([$1], [GCJ], [],
        [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
      ;;
 
    hpux9* | hpux10* | hpux11*)
      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
      # not for PA HP-UX.
      case $host_cpu in
      hppa*64*|ia64*)
        # +Z the default
        ;;
      *)
        _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
        ;;
      esac
      # Is there a better lt_prog_compiler_static that works with the bundled CC?
      _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
      ;;
 
    irix5* | irix6* | nonstopux*)
      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
      # PIC (with -KPIC) is the default.
      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
      ;;
 
    linux* | k*bsd*-gnu)
      case $cc_basename in
      icc* | ecc*)
        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
        _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
        ;;
      pgcc* | pgf77* | pgf90* | pgf95*)
        # Portland Group compilers (*not* the Pentium gcc compiler,
        # which looks to be a dead project)
        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
        _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
        ;;
      ccc*)
        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
        # All Alpha code is PIC.
        _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
        ;;
      *)
        case `$CC -V 2>&1 | sed 5q` in
        *Sun\ C*)
          # Sun C 5.9
          _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
          _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
          _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
          ;;
        *Sun\ F*)
          # Sun Fortran 8.3 passes all unrecognized flags to the linker
          _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
          _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
          _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
          ;;
        esac
        ;;
      esac
      ;;
 
    newsos6)
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      ;;
 
    *nto* | *qnx*)
      # QNX uses GNU C++, but need to define -shared option too, otherwise
      # it will coredump.
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
      ;;
 
    osf3* | osf4* | osf5*)
      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
      # All OSF/1 code is PIC.
      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
      ;;
 
    rdos*)
      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
      ;;
 
    solaris*)
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      case $cc_basename in
      f77* | f90* | f95*)
        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
      *)
        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
      esac
      ;;
 
    sunos4*)
      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      ;;
 
    sysv4 | sysv4.2uw2* | sysv4.3*)
      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      ;;
 
    sysv4*MP*)
      if test -d /usr/nec ;then
        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
        _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      fi
      ;;
 
    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      ;;
 
    unicos*)
      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
      ;;
 
    uts4*)
      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      ;;
 
    *)
      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
      ;;
    esac
  fi
])
case $host_os in
  # For platforms which do not support PIC, -DPIC is meaningless:
  *djgpp*)
    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
    ;;
  *)
    _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
    ;;
esac
AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
        [How to pass a linker flag through the compiler])
 
#
# Check to make sure the PIC flag actually works.
#
if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
  _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
    [_LT_TAGVAR(lt_prog_compiler_pic_works, $1)],
    [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
    [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
     "" | " "*) ;;
     *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
     esac],
    [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
     _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
fi
_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
        [Additional compiler flags for building library objects])
 
#
# Check to make sure the static flag actually works.
#
wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
  _LT_TAGVAR(lt_prog_compiler_static_works, $1),
  $lt_tmp_static_flag,
  [],
  [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
        [Compiler flag to prevent dynamic linking])
])# _LT_COMPILER_PIC
 
 
# _LT_LINKER_SHLIBS([TAGNAME])
# ----------------------------
# See if the linker supports building shared libraries.
m4_defun([_LT_LINKER_SHLIBS],
[AC_REQUIRE([LT_PATH_LD])dnl
AC_REQUIRE([LT_PATH_NM])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
m4_require([_LT_TAG_COMPILER])dnl
AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
m4_if([$1], [CXX], [
  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
  case $host_os in
  aix[[4-9]]*)
    # If we're using GNU nm, then we don't want the "-C" option.
    # -C means demangle to AIX nm, but means don't demangle with GNU nm
    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
    else
      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
    fi
    ;;
  pw32*)
    _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
  ;;
  cygwin* | mingw*)
    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
  ;;
  *)
    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
  ;;
  esac
], [
  runpath_var=
  _LT_TAGVAR(allow_undefined_flag, $1)=
  _LT_TAGVAR(always_export_symbols, $1)=no
  _LT_TAGVAR(archive_cmds, $1)=
  _LT_TAGVAR(archive_expsym_cmds, $1)=
  _LT_TAGVAR(compiler_needs_object, $1)=no
  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
  _LT_TAGVAR(export_dynamic_flag_spec, $1)=
  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
  _LT_TAGVAR(hardcode_automatic, $1)=no
  _LT_TAGVAR(hardcode_direct, $1)=no
  _LT_TAGVAR(hardcode_direct_absolute, $1)=no
  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
  _LT_TAGVAR(hardcode_libdir_separator, $1)=
  _LT_TAGVAR(hardcode_minus_L, $1)=no
  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
  _LT_TAGVAR(inherit_rpath, $1)=no
  _LT_TAGVAR(link_all_deplibs, $1)=unknown
  _LT_TAGVAR(module_cmds, $1)=
  _LT_TAGVAR(module_expsym_cmds, $1)=
  _LT_TAGVAR(old_archive_from_new_cmds, $1)=
  _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
  _LT_TAGVAR(thread_safe_flag_spec, $1)=
  _LT_TAGVAR(whole_archive_flag_spec, $1)=
  # include_expsyms should be a list of space-separated symbols to be *always*
  # included in the symbol list
  _LT_TAGVAR(include_expsyms, $1)=
  # exclude_expsyms can be an extended regexp of symbols to exclude
  # it will be wrapped by ` (' and `)$', so one must not match beginning or
  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
  # as well as any symbol that contains `d'.
  _LT_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
  # platforms (ab)use it in PIC code, but their linkers get confused if
  # the symbol is explicitly referenced.  Since portable code cannot
  # rely on this symbol name, it's probably fine to never include it in
  # preloaded symbol tables.
  extract_expsyms_cmds=
 
  case $host_os in
  cygwin* | mingw* | pw32*)
    # FIXME: the MSVC++ port hasn't been tested in a loooong time
    # When not using gcc, we currently assume that we are using
    # Microsoft Visual C++.
    if test "$GCC" != yes; then
      with_gnu_ld=no
    fi
    ;;
  interix*)
    # we just hope/assume this is gcc and not c89 (= MSVC++)
    with_gnu_ld=yes
    ;;
  openbsd*)
    with_gnu_ld=no
    ;;
  esac
 
  _LT_TAGVAR(ld_shlibs, $1)=yes
  if test "$with_gnu_ld" = yes; then
    # If archive_cmds runs LD, not CC, wlarc should be empty
    wlarc='${wl}'
 
    # Set some defaults for GNU ld with shared library support. These
    # are reset later if shared libraries are not supported. Putting them
    # here allows them to be overridden if necessary.
    runpath_var=LD_RUN_PATH
    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
    # ancient GNU ld didn't support --whole-archive et. al.
    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
      _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
    else
      _LT_TAGVAR(whole_archive_flag_spec, $1)=
    fi
    supports_anon_versioning=no
    case `$LD -v 2>&1` in
      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
      *\ 2.11.*) ;; # other 2.11 versions
      *) supports_anon_versioning=yes ;;
    esac
 
    # See if GNU ld supports shared libraries.
    case $host_os in
    aix[[3-9]]*)
      # On AIX/PPC, the GNU linker is very broken
      if test "$host_cpu" != ia64; then
        _LT_TAGVAR(ld_shlibs, $1)=no
        cat <<_LT_EOF 1>&2
 
*** Warning: the GNU linker, at least up to release 2.9.1, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support.  If you
*** really care for shared libraries, you may want to modify your PATH
*** so that a non-GNU linker is found, and then restart.
 
_LT_EOF
      fi
      ;;
 
    amigaos*)
      if test "$host_cpu" = m68k; then
        _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
        _LT_TAGVAR(hardcode_minus_L, $1)=yes
      fi
 
      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
      # that the semantics of dynamic libraries on AmigaOS, at least up
      # to version 4, is to share data among multiple programs linked
      # with the same dynamic library.  Since this doesn't match the
      # behavior of shared libraries on other platforms, we can't use
      # them.
      _LT_TAGVAR(ld_shlibs, $1)=no
      ;;
 
    beos*)
      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
        _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
        # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
        # support --undefined.  This deserves some investigation.  FIXME
        _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
      else
        _LT_TAGVAR(ld_shlibs, $1)=no
      fi
      ;;
 
    cygwin* | mingw* | pw32*)
      # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
      # as there is no search path for DLLs.
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
      _LT_TAGVAR(always_export_symbols, $1)=no
      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
 
      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
        # If the export-symbols file already is a .def file (1st line
        # is EXPORTS), use it as is; otherwise, prepend...
        _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
          cp $export_symbols $output_objdir/$soname.def;
        else
          echo EXPORTS > $output_objdir/$soname.def;
          cat $export_symbols >> $output_objdir/$soname.def;
        fi~
        $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
      else
        _LT_TAGVAR(ld_shlibs, $1)=no
      fi
      ;;
 
    interix[[3-9]]*)
      _LT_TAGVAR(hardcode_direct, $1)=no
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
      # Instead, shared libraries are loaded at an image base (0x10000000 by
      # default) and relocated if they conflict, which is a slow very memory
      # consuming and fragmenting process.  To avoid this, we pick a random,
      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
      ;;
 
    gnu* | linux* | tpf* | k*bsd*-gnu)
      tmp_diet=no
      if test "$host_os" = linux-dietlibc; then
        case $cc_basename in
          diet\ *) tmp_diet=yes;;       # linux-dietlibc with static linking (!diet-dyn)
        esac
      fi
      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
         && test "$tmp_diet" = no
      then
        tmp_addflag=
        case $cc_basename,$host_cpu in
        pgcc*)                          # Portland Group C compiler
          _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
          tmp_addflag=' $pic_flag'
          ;;
        pgf77* | pgf90* | pgf95*)       # Portland Group f77 and f90 compilers
          _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
          tmp_addflag=' $pic_flag -Mnomain' ;;
        ecc*,ia64* | icc*,ia64*)        # Intel C compiler on ia64
          tmp_addflag=' -i_dynamic' ;;
        efc*,ia64* | ifort*,ia64*)      # Intel Fortran compiler on ia64
          tmp_addflag=' -i_dynamic -nofor_main' ;;
        ifc* | ifort*)                  # Intel Fortran compiler
          tmp_addflag=' -nofor_main' ;;
        esac
        case `$CC -V 2>&1 | sed 5q` in
        *Sun\ C*)                       # Sun C 5.9
          _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
          _LT_TAGVAR(compiler_needs_object, $1)=yes
          tmp_sharedflag='-G' ;;
        *Sun\ F*)                       # Sun Fortran 8.3
          tmp_sharedflag='-G' ;;
        *)
          tmp_sharedflag='-shared' ;;
        esac
        _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 
        if test "x$supports_anon_versioning" = xyes; then
          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
            cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
            echo "local: *; };" >> $output_objdir/$libname.ver~
            $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
        fi
      else
        _LT_TAGVAR(ld_shlibs, $1)=no
      fi
      ;;
 
    netbsd*)
      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
        _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
        wlarc=
      else
        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
      fi
      ;;
 
    solaris*)
      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
        _LT_TAGVAR(ld_shlibs, $1)=no
        cat <<_LT_EOF 1>&2
 
*** Warning: The releases 2.8.* of the GNU linker cannot reliably
*** create shared libraries on Solaris systems.  Therefore, libtool
*** is disabling shared libraries support.  We urge you to upgrade GNU
*** binutils to release 2.9.1 or newer.  Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.
 
_LT_EOF
      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
      else
        _LT_TAGVAR(ld_shlibs, $1)=no
      fi
      ;;
 
    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
      case `$LD -v 2>&1` in
        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
        _LT_TAGVAR(ld_shlibs, $1)=no
        cat <<_LT_EOF 1>&2
 
*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
*** reliably create shared libraries on SCO systems.  Therefore, libtool
*** is disabling shared libraries support.  We urge you to upgrade GNU
*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.
 
_LT_EOF
        ;;
        *)
          # For security reasons, it is highly recommended that you always
          # use absolute paths for naming shared libraries, and exclude the
          # DT_RUNPATH tag from executables and libraries.  But doing so
          # requires that you compile everything twice, which is a pain.
          if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
            _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
          else
            _LT_TAGVAR(ld_shlibs, $1)=no
          fi
        ;;
      esac
      ;;
 
    sunos4*)
      _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
      wlarc=
      _LT_TAGVAR(hardcode_direct, $1)=yes
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;
 
    *)
      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
      else
        _LT_TAGVAR(ld_shlibs, $1)=no
      fi
      ;;
    esac
 
    if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
      runpath_var=
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
      _LT_TAGVAR(export_dynamic_flag_spec, $1)=
      _LT_TAGVAR(whole_archive_flag_spec, $1)=
    fi
  else
    # PORTME fill in a description of your system's linker (not GNU ld)
    case $host_os in
    aix3*)
      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
      _LT_TAGVAR(always_export_symbols, $1)=yes
      _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
      # Note: this linker hardcodes the directories in LIBPATH if there
      # are no directories specified by -L.
      _LT_TAGVAR(hardcode_minus_L, $1)=yes
      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
        # Neither direct hardcoding nor static linking is supported with a
        # broken collect2.
        _LT_TAGVAR(hardcode_direct, $1)=unsupported
      fi
      ;;
 
    aix[[4-9]]*)
      if test "$host_cpu" = ia64; then
        # On IA64, the linker does run time linking by default, so we don't
        # have to do anything special.
        aix_use_runtimelinking=no
        exp_sym_flag='-Bexport'
        no_entry_flag=""
      else
        # If we're using GNU nm, then we don't want the "-C" option.
        # -C means demangle to AIX nm, but means don't demangle with GNU nm
        if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
          _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
        else
          _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
        fi
        aix_use_runtimelinking=no
 
        # Test if we are trying to use run time linking or normal
        # AIX style linking. If -brtl is somewhere in LDFLAGS, we
        # need to do runtime linking.
        case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
          for ld_flag in $LDFLAGS; do
          if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
            aix_use_runtimelinking=yes
            break
          fi
          done
          ;;
        esac
 
        exp_sym_flag='-bexport'
        no_entry_flag='-bnoentry'
      fi
 
      # When large executables or shared objects are built, AIX ld can
      # have problems creating the table of contents.  If linking a library
      # or program results in "error TOC overflow" add -mminimal-toc to
      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
 
      _LT_TAGVAR(archive_cmds, $1)=''
      _LT_TAGVAR(hardcode_direct, $1)=yes
      _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
      _LT_TAGVAR(link_all_deplibs, $1)=yes
      _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
 
      if test "$GCC" = yes; then
        case $host_os in aix4.[[012]]|aix4.[[012]].*)
        # We only want to do this on AIX 4.2 and lower, the check
        # below for broken collect2 doesn't work under 4.3+
          collect2name=`${CC} -print-prog-name=collect2`
          if test -f "$collect2name" &&
           strings "$collect2name" | $GREP resolve_lib_name >/dev/null
          then
          # We have reworked collect2
          :
          else
          # We have old collect2
          _LT_TAGVAR(hardcode_direct, $1)=unsupported
          # It fails to find uninstalled libraries when the uninstalled
          # path is not listed in the libpath.  Setting hardcode_minus_L
          # to unsupported forces relinking
          _LT_TAGVAR(hardcode_minus_L, $1)=yes
          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
          _LT_TAGVAR(hardcode_libdir_separator, $1)=
          fi
          ;;
        esac
        shared_flag='-shared'
        if test "$aix_use_runtimelinking" = yes; then
          shared_flag="$shared_flag "'${wl}-G'
        fi
      else
        # not using gcc
        if test "$host_cpu" = ia64; then
        # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
        # chokes on -Wl,-G. The following line is correct:
          shared_flag='-G'
        else
          if test "$aix_use_runtimelinking" = yes; then
            shared_flag='${wl}-G'
          else
            shared_flag='${wl}-bM:SRE'
          fi
        fi
      fi
 
      # It seems that -bexpall does not export symbols beginning with
      # underscore (_), so it is better to generate a list of symbols to export.
      _LT_TAGVAR(always_export_symbols, $1)=yes
      if test "$aix_use_runtimelinking" = yes; then
        # Warning - without using the other runtime loading flags (-brtl),
        # -berok will link without error, but may produce a broken library.
        _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
        # Determine the default libpath from the value encoded in an
        # empty executable.
        _LT_SYS_MODULE_PATH_AIX
        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
      else
        if test "$host_cpu" = ia64; then
          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
          _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
          _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
        else
         # Determine the default libpath from the value encoded in an
         # empty executable.
         _LT_SYS_MODULE_PATH_AIX
         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
          # Warning - without using the other run time loading flags,
          # -berok will link without error, but may produce a broken library.
          _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
          _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
          # Exported symbols can be pulled into shared objects from archives
          _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
          _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
          # This is similar to how AIX traditionally builds its shared libraries.
          _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
        fi
      fi
      ;;
 
    amigaos*)
      if test "$host_cpu" = m68k; then
        _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
        _LT_TAGVAR(hardcode_minus_L, $1)=yes
      fi
      # see comment about different semantics on the GNU ld section
      _LT_TAGVAR(ld_shlibs, $1)=no
      ;;
 
    bsdi[[45]]*)
      _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
      ;;
 
    cygwin* | mingw* | pw32*)
      # When not using gcc, we currently assume that we are using
      # Microsoft Visual C++.
      # hardcode_libdir_flag_spec is actually meaningless, as there is
      # no search path for DLLs.
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
      # Tell ltmain to make .lib files, not .a files.
      libext=lib
      # Tell ltmain to make .dll files, not .so files.
      shrext_cmds=".dll"
      # FIXME: Setting linknames here is a bad hack.
      _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
      # The linker will automatically build a .lib file if we build a DLL.
      _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
      # FIXME: Should let the user specify the lib program.
      _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
      _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
      ;;
 
    darwin* | rhapsody*)
      case $host_os in
      rhapsody* | darwin1.[[012]])
        _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
        ;;
      *) # Darwin 1.3 on
        case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
        10.[[012]])
          _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
          ;;
        10.*)
          _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
          ;;
        esac
        ;;
      esac
      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
      _LT_TAGVAR(hardcode_direct, $1)=no
      _LT_TAGVAR(hardcode_automatic, $1)=yes
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
      _LT_TAGVAR(whole_archive_flag_spec, $1)=''
      _LT_TAGVAR(link_all_deplibs, $1)=yes
      if test "$GCC" = yes ; then
        AC_CACHE_VAL([lt_cv_apple_cc_single_mod],
        [lt_cv_apple_cc_single_mod=no
        if test -z "${LT_MULTI_MODULE}"; then
          # By default we will add the -single_module flag. You can override
          # by either setting the environment variable LT_MULTI_MODULE
          # non-empty at configure time, or by adding -multi-module to the
          # link flags.
          echo "int foo(void){return 1;}" > conftest.c
          $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
              -dynamiclib ${wl}-single_module conftest.c
          if test -f libconftest.dylib; then
              lt_cv_apple_cc_single_mod=yes
              rm libconftest.dylib
          fi
          rm conftest.$ac_ext
        fi])
        output_verbose_link_cmd=echo
        if test "X$lt_cv_apple_cc_single_mod" = Xyes ; then
          _LT_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
          _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $single_module -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
        else
          _LT_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
          _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
        fi
        _LT_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
        _LT_TAGVAR(module_expsym_cmds, $1)='sed -e "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
      else
        case $cc_basename in
        xlc*)
          output_verbose_link_cmd=echo
          _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`$ECHO $rpath/$soname` $verstring'
          _LT_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
          _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
          _LT_TAGVAR(module_expsym_cmds, $1)='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
          ;;
        *)
          _LT_TAGVAR(ld_shlibs, $1)=no
          ;;
        esac
      fi
      ;;
 
    dgux*)
      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;
 
    freebsd1*)
      _LT_TAGVAR(ld_shlibs, $1)=no
      ;;
 
    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
    # support.  Future versions do this automatically, but an explicit c++rt0.o
    # does not break anything, and helps significantly (at the cost of a little
    # extra space).
    freebsd2.2*)
      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
      _LT_TAGVAR(hardcode_direct, $1)=yes
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;
 
    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
    freebsd2*)
      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
      _LT_TAGVAR(hardcode_direct, $1)=yes
      _LT_TAGVAR(hardcode_minus_L, $1)=yes
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;
 
    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
    freebsd* | dragonfly*)
      _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
      _LT_TAGVAR(hardcode_direct, $1)=yes
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;
 
    hpux9*)
      if test "$GCC" = yes; then
        _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
      else
        _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
      fi
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
      _LT_TAGVAR(hardcode_direct, $1)=yes
 
      # hardcode_minus_L: Not really in the search PATH,
      # but as the default location of the library.
      _LT_TAGVAR(hardcode_minus_L, $1)=yes
      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
      ;;
 
    hpux10*)
      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
      else
        _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
      fi
      if test "$with_gnu_ld" = no; then
        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
        _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
        _LT_TAGVAR(hardcode_direct, $1)=yes
        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
        # hardcode_minus_L: Not really in the search PATH,
        # but as the default location of the library.
        _LT_TAGVAR(hardcode_minus_L, $1)=yes
      fi
      ;;
 
    hpux11*)
      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
        case $host_cpu in
        hppa*64*)
          _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
          ;;
        ia64*)
          _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
          ;;
        *)
          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
          ;;
        esac
      else
        case $host_cpu in
        hppa*64*)
          _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
          ;;
        ia64*)
          _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
          ;;
        *)
          _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
          ;;
        esac
      fi
      if test "$with_gnu_ld" = no; then
        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
        case $host_cpu in
        hppa*64*|ia64*)
          _LT_TAGVAR(hardcode_direct, $1)=no
          _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
          ;;
        *)
          _LT_TAGVAR(hardcode_direct, $1)=yes
          _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
          _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
 
          # hardcode_minus_L: Not really in the search PATH,
          # but as the default location of the library.
          _LT_TAGVAR(hardcode_minus_L, $1)=yes
          ;;
        esac
      fi
      ;;
 
    irix5* | irix6* | nonstopux*)
      if test "$GCC" = yes; then
        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
        # Try to use the -exported_symbol ld option, if it does not
        # work, assume that -exports_file does not work either and
        # implicitly export all symbols.
        save_LDFLAGS="$LDFLAGS"
        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
        AC_LINK_IFELSE(int foo(void) {},
          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
        )
        LDFLAGS="$save_LDFLAGS"
      else
        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
      fi
      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
      _LT_TAGVAR(inherit_rpath, $1)=yes
      _LT_TAGVAR(link_all_deplibs, $1)=yes
      ;;
 
    netbsd*)
      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
        _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
      else
        _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
      fi
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
      _LT_TAGVAR(hardcode_direct, $1)=yes
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;
 
    newsos6)
      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      _LT_TAGVAR(hardcode_direct, $1)=yes
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;
 
    *nto* | *qnx*)
      ;;
 
    openbsd*)
      _LT_TAGVAR(hardcode_direct, $1)=yes
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
      if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
      else
        case $host_os in
        openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
          _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
          ;;
        *)
          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
          ;;
        esac
      fi
      ;;
 
    os2*)
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
      _LT_TAGVAR(hardcode_minus_L, $1)=yes
      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
      _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
      ;;
 
    osf3*)
      if test "$GCC" = yes; then
        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
      else
        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
      fi
      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
      ;;
 
    osf4* | osf5*)      # as osf3* with the addition of -msym flag
      if test "$GCC" = yes; then
        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
      else
        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
        $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
 
        # Both c and cxx compiler support -rpath directly
        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
      fi
      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
      ;;
 
    solaris*)
      _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
      if test "$GCC" = yes; then
        wlarc='${wl}'
        _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
          $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
      else
        case `$CC -V 2>&1` in
        *"Compilers 5.0"*)
          wlarc=''
          _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
          $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
          ;;
        *)
          wlarc='${wl}'
          _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
          $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
          ;;
        esac
      fi
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      case $host_os in
      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
      *)
        # The compiler driver will combine and reorder linker options,
        # but understands `-z linker_flag'.  GCC discards it without `$wl',
        # but is careful enough not to reorder.
        # Supported since Solaris 2.6 (maybe 2.5.1?)
        if test "$GCC" = yes; then
          _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
        else
          _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
        fi
        ;;
      esac
      _LT_TAGVAR(link_all_deplibs, $1)=yes
      ;;
 
    sunos4*)
      if test "x$host_vendor" = xsequent; then
        # Use $CC to link under sequent, because it throws in some extra .o
        # files that make .init and .fini sections work.
        _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
      else
        _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
      fi
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
      _LT_TAGVAR(hardcode_direct, $1)=yes
      _LT_TAGVAR(hardcode_minus_L, $1)=yes
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;
 
    sysv4)
      case $host_vendor in
        sni)
          _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
          _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
        ;;
        siemens)
          ## LD is ld it makes a PLAMLIB
          ## CC just makes a GrossModule.
          _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
          _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
          _LT_TAGVAR(hardcode_direct, $1)=no
        ;;
        motorola)
          _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
          _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
        ;;
      esac
      runpath_var='LD_RUN_PATH'
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;
 
    sysv4.3*)
      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
      ;;
 
    sysv4*MP*)
      if test -d /usr/nec; then
        _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
        _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
        runpath_var=LD_RUN_PATH
        hardcode_runpath_var=yes
        _LT_TAGVAR(ld_shlibs, $1)=yes
      fi
      ;;
 
    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      runpath_var='LD_RUN_PATH'
 
      if test "$GCC" = yes; then
        _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
      else
        _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
      fi
      ;;
 
    sysv5* | sco3.2v5* | sco5v6*)
      # Note: We can NOT use -z defs as we might desire, because we do not
      # link with -lc, and that would cause any symbols used from libc to
      # always be unresolved, which means just about no library would
      # ever link correctly.  If we're not using GNU ld we use -z text
      # though, which does catch some bad symbols but isn't as heavy-handed
      # as -z defs.
      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
      _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
      _LT_TAGVAR(link_all_deplibs, $1)=yes
      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
      runpath_var='LD_RUN_PATH'
 
      if test "$GCC" = yes; then
        _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
      else
        _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
      fi
      ;;
 
    uts4*)
      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;
 
    *)
      _LT_TAGVAR(ld_shlibs, $1)=no
      ;;
    esac
 
    if test x$host_vendor = xsni; then
      case $host in
      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
        ;;
      esac
    fi
  fi
])
AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
 
_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
 
_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
_LT_DECL([], [extract_expsyms_cmds], [2],
    [The commands to extract the exported symbol list from a shared archive])
 
#
# Do we need to explicitly link libc?
#
case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
x|xyes)
  # Assume -lc should be added
  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
 
  if test "$enable_shared" = yes && test "$GCC" = yes; then
    case $_LT_TAGVAR(archive_cmds, $1) in
    *'~'*)
      # FIXME: we may have to deal with multi-command sequences.
      ;;
    '$CC '*)
      # Test whether the compiler implicitly links with -lc since on some
      # systems, -lgcc has to come before -lc. If gcc already passes -lc
      # to ld, don't add -lc before -lgcc.
      AC_MSG_CHECKING([whether -lc should be explicitly linked in])
      $RM conftest*
      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
        soname=conftest
        lib=conftest
        libobjs=conftest.$ac_objext
        deplibs=
        wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
        pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
        compiler_flags=-v
        linker_flags=-v
        verstring=
        output_objdir=.
        libname=conftest
        lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
        _LT_TAGVAR(allow_undefined_flag, $1)=
        if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
        then
          _LT_TAGVAR(archive_cmds_need_lc, $1)=no
        else
          _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
        fi
        _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
      else
        cat conftest.err 1>&5
      fi
      $RM conftest*
      AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
      ;;
    esac
  fi
  ;;
esac
 
_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
    [Whether or not to add -lc for building shared libraries])
_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
    [enable_shared_with_static_runtimes], [0],
    [Whether or not to disallow shared libs when runtime libs are static])
_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
    [Compiler flag to allow reflexive dlopens])
_LT_TAGDECL([], [whole_archive_flag_spec], [1],
    [Compiler flag to generate shared objects directly from archives])
_LT_TAGDECL([], [compiler_needs_object], [1],
    [Whether the compiler copes with passing no objects directly])
_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
    [Create an old-style archive from a shared archive])
_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
    [Create a temporary old-style archive to link instead of a shared archive])
_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
_LT_TAGDECL([], [archive_expsym_cmds], [2])
_LT_TAGDECL([], [module_cmds], [2],
    [Commands used to build a loadable module if different from building
    a shared archive.])
_LT_TAGDECL([], [module_expsym_cmds], [2])
_LT_TAGDECL([], [with_gnu_ld], [1],
    [Whether we are building with GNU ld or not])
_LT_TAGDECL([], [allow_undefined_flag], [1],
    [Flag that allows shared libraries with undefined symbols to be built])
_LT_TAGDECL([], [no_undefined_flag], [1],
    [Flag that enforces no undefined symbols])
_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
    [Flag to hardcode $libdir into a binary during linking.
    This must work even if $libdir does not exist])
_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
    [[If ld is used when linking, flag to hardcode $libdir into a binary
    during linking.  This must work even if $libdir does not exist]])
_LT_TAGDECL([], [hardcode_libdir_separator], [1],
    [Whether we need a single "-rpath" flag with a separated argument])
_LT_TAGDECL([], [hardcode_direct], [0],
    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
    DIR into the resulting binary])
_LT_TAGDECL([], [hardcode_direct_absolute], [0],
    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
    DIR into the resulting binary and the resulting library dependency is
    "absolute", i.e impossible to change by setting ${shlibpath_var} if the
    library is relocated])
_LT_TAGDECL([], [hardcode_minus_L], [0],
    [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
    into the resulting binary])
_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
    [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
    into the resulting binary])
_LT_TAGDECL([], [hardcode_automatic], [0],
    [Set to "yes" if building a shared library automatically hardcodes DIR
    into the library and all subsequent libraries and executables linked
    against it])
_LT_TAGDECL([], [inherit_rpath], [0],
    [Set to yes if linker adds runtime paths of dependent libraries
    to runtime path list])
_LT_TAGDECL([], [link_all_deplibs], [0],
    [Whether libtool must link a program against all its dependency libraries])
_LT_TAGDECL([], [fix_srcfile_path], [1],
    [Fix the shell variable $srcfile for the compiler])
_LT_TAGDECL([], [always_export_symbols], [0],
    [Set to "yes" if exported symbols are required])
_LT_TAGDECL([], [export_symbols_cmds], [2],
    [The commands to list exported symbols])
_LT_TAGDECL([], [exclude_expsyms], [1],
    [Symbols that should not be listed in the preloaded symbols])
_LT_TAGDECL([], [include_expsyms], [1],
    [Symbols that must always be exported])
_LT_TAGDECL([], [prelink_cmds], [2],
    [Commands necessary for linking programs (against libraries) with templates])
_LT_TAGDECL([], [file_list_spec], [1],
    [Specify filename containing input files])
dnl FIXME: Not yet implemented
dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
dnl    [Compiler flag to generate thread safe objects])
])# _LT_LINKER_SHLIBS
 
 
# _LT_LANG_C_CONFIG([TAG])
# ------------------------
# Ensure that the configuration variables for a C compiler are suitably
# defined.  These variables are subsequently used by _LT_CONFIG to write
# the compiler configuration to `libtool'.
m4_defun([_LT_LANG_C_CONFIG],
[m4_require([_LT_DECL_EGREP])dnl
lt_save_CC="$CC"
AC_LANG_PUSH(C)
 
# Source file extension for C test sources.
ac_ext=c
 
# Object file extension for compiled C test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
 
# Code to be used in simple compile tests
lt_simple_compile_test_code="int some_variable = 0;"
 
# Code to be used in simple link tests
lt_simple_link_test_code='int main(){return(0);}'
 
_LT_TAG_COMPILER
# Save the default compiler, since it gets overwritten when the other
# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
compiler_DEFAULT=$CC
 
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
 
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
if test -n "$compiler"; then
  _LT_COMPILER_NO_RTTI($1)
  _LT_COMPILER_PIC($1)
  _LT_COMPILER_C_O($1)
  _LT_COMPILER_FILE_LOCKS($1)
  _LT_LINKER_SHLIBS($1)
  _LT_SYS_DYNAMIC_LINKER($1)
  _LT_LINKER_HARDCODE_LIBPATH($1)
  LT_SYS_DLOPEN_SELF
  _LT_CMD_STRIPLIB
 
  # Report which library types will actually be built
  AC_MSG_CHECKING([if libtool supports shared libraries])
  AC_MSG_RESULT([$can_build_shared])
 
  AC_MSG_CHECKING([whether to build shared libraries])
  test "$can_build_shared" = "no" && enable_shared=no
 
  # On AIX, shared libraries and static libraries use the same namespace, and
  # are all built from PIC.
  case $host_os in
  aix3*)
    test "$enable_shared" = yes && enable_static=no
    if test -n "$RANLIB"; then
      archive_cmds="$archive_cmds~\$RANLIB \$lib"
      postinstall_cmds='$RANLIB $lib'
    fi
    ;;
 
  aix[[4-9]]*)
    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
      test "$enable_shared" = yes && enable_static=no
    fi
    ;;
  esac
  AC_MSG_RESULT([$enable_shared])
 
  AC_MSG_CHECKING([whether to build static libraries])
  # Make sure either enable_shared or enable_static is yes.
  test "$enable_shared" = yes || enable_static=yes
  AC_MSG_RESULT([$enable_static])
 
  _LT_CONFIG($1)
fi
AC_LANG_POP
CC="$lt_save_CC"
])# _LT_LANG_C_CONFIG
 
 
# _LT_PROG_CXX
# ------------
# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
# compiler, we have our own version here.
m4_defun([_LT_PROG_CXX],
[
pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
AC_PROG_CXX
if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
    (test "X$CXX" != "Xg++"))) ; then
  AC_PROG_CXXCPP
else
  _lt_caught_CXX_error=yes
fi
popdef([AC_MSG_ERROR])
])# _LT_PROG_CXX
 
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([_LT_PROG_CXX], [])
 
 
# _LT_LANG_CXX_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for a C++ compiler are suitably
# defined.  These variables are subsequently used by _LT_CONFIG to write
# the compiler configuration to `libtool'.
m4_defun([_LT_LANG_CXX_CONFIG],
[AC_REQUIRE([_LT_PROG_CXX])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_EGREP])dnl
 
AC_LANG_PUSH(C++)
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(archive_expsym_cmds, $1)=
_LT_TAGVAR(compiler_needs_object, $1)=no
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
_LT_TAGVAR(hardcode_automatic, $1)=no
_LT_TAGVAR(inherit_rpath, $1)=no
_LT_TAGVAR(module_cmds, $1)=
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
 
# Source file extension for C++ test sources.
ac_ext=cpp
 
# Object file extension for compiled C++ test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
 
# No sense in running all these tests if we already determined that
# the CXX compiler isn't working.  Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
if test "$_lt_caught_CXX_error" != yes; then
  # Code to be used in simple compile tests
  lt_simple_compile_test_code="int some_variable = 0;"
 
  # Code to be used in simple link tests
  lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
 
  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
  _LT_TAG_COMPILER
 
  # save warnings/boilerplate of simple test code
  _LT_COMPILER_BOILERPLATE
  _LT_LINKER_BOILERPLATE
 
  # Allow CC to be a program name with arguments.
  lt_save_CC=$CC
  lt_save_LD=$LD
  lt_save_GCC=$GCC
  GCC=$GXX
  lt_save_with_gnu_ld=$with_gnu_ld
  lt_save_path_LD=$lt_cv_path_LD
  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
  else
    $as_unset lt_cv_prog_gnu_ld
  fi
  if test -n "${lt_cv_path_LDCXX+set}"; then
    lt_cv_path_LD=$lt_cv_path_LDCXX
  else
    $as_unset lt_cv_path_LD
  fi
  test -z "${LDCXX+set}" || LD=$LDCXX
  CC=${CXX-"c++"}
  compiler=$CC
  _LT_TAGVAR(compiler, $1)=$CC
  _LT_CC_BASENAME([$compiler])
 
  if test -n "$compiler"; then
    # We don't want -fno-exception when compiling C++ code, so set the
    # no_builtin_flag separately
    if test "$GXX" = yes; then
      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
    else
      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
    fi
 
    if test "$GXX" = yes; then
      # Set up default GNU C++ configuration
 
      LT_PATH_LD
 
      # Check if GNU C++ uses GNU ld as the underlying linker, since the
      # archiving commands below assume that GNU ld is being used.
      if test "$with_gnu_ld" = yes; then
        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 
        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
 
        # If archive_cmds runs LD, not CC, wlarc should be empty
        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
        #     investigate it a little bit more. (MM)
        wlarc='${wl}'
 
        # ancient GNU ld didn't support --whole-archive et. al.
        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
          $GREP 'no-whole-archive' > /dev/null; then
          _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
        else
          _LT_TAGVAR(whole_archive_flag_spec, $1)=
        fi
      else
        with_gnu_ld=no
        wlarc=
 
        # A generic and very simple default shared library creation
        # command for GNU C++ for the case where it uses the native
        # linker, instead of GNU ld.  If possible, this setting should
        # overridden to take advantage of the native linker features on
        # the platform it is being used on.
        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
      fi
 
      # Commands to make compiler produce verbose output that lists
      # what "hidden" libraries, object files and flags are used when
      # linking a shared library.
      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
 
    else
      GXX=no
      with_gnu_ld=no
      wlarc=
    fi
 
    # PORTME: fill in a description of your system's C++ link characteristics
    AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
    _LT_TAGVAR(ld_shlibs, $1)=yes
    case $host_os in
      aix3*)
        # FIXME: insert proper C++ library support
        _LT_TAGVAR(ld_shlibs, $1)=no
        ;;
      aix[[4-9]]*)
        if test "$host_cpu" = ia64; then
          # On IA64, the linker does run time linking by default, so we don't
          # have to do anything special.
          aix_use_runtimelinking=no
          exp_sym_flag='-Bexport'
          no_entry_flag=""
        else
          aix_use_runtimelinking=no
 
          # Test if we are trying to use run time linking or normal
          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
          # need to do runtime linking.
          case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
            for ld_flag in $LDFLAGS; do
              case $ld_flag in
              *-brtl*)
                aix_use_runtimelinking=yes
                break
                ;;
              esac
            done
            ;;
          esac
 
          exp_sym_flag='-bexport'
          no_entry_flag='-bnoentry'
        fi
 
        # When large executables or shared objects are built, AIX ld can
        # have problems creating the table of contents.  If linking a library
        # or program results in "error TOC overflow" add -mminimal-toc to
        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
 
        _LT_TAGVAR(archive_cmds, $1)=''
        _LT_TAGVAR(hardcode_direct, $1)=yes
        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
        _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
        _LT_TAGVAR(link_all_deplibs, $1)=yes
        _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
 
        if test "$GXX" = yes; then
          case $host_os in aix4.[[012]]|aix4.[[012]].*)
          # We only want to do this on AIX 4.2 and lower, the check
          # below for broken collect2 doesn't work under 4.3+
          collect2name=`${CC} -print-prog-name=collect2`
          if test -f "$collect2name" &&
             strings "$collect2name" | $GREP resolve_lib_name >/dev/null
          then
            # We have reworked collect2
            :
          else
            # We have old collect2
            _LT_TAGVAR(hardcode_direct, $1)=unsupported
            # It fails to find uninstalled libraries when the uninstalled
            # path is not listed in the libpath.  Setting hardcode_minus_L
            # to unsupported forces relinking
            _LT_TAGVAR(hardcode_minus_L, $1)=yes
            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
            _LT_TAGVAR(hardcode_libdir_separator, $1)=
          fi
          esac
          shared_flag='-shared'
          if test "$aix_use_runtimelinking" = yes; then
            shared_flag="$shared_flag "'${wl}-G'
          fi
        else
          # not using gcc
          if test "$host_cpu" = ia64; then
          # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
          # chokes on -Wl,-G. The following line is correct:
          shared_flag='-G'
          else
            if test "$aix_use_runtimelinking" = yes; then
              shared_flag='${wl}-G'
            else
              shared_flag='${wl}-bM:SRE'
            fi
          fi
        fi
 
        # It seems that -bexpall does not export symbols beginning with
        # underscore (_), so it is better to generate a list of symbols to
        # export.
        _LT_TAGVAR(always_export_symbols, $1)=yes
        if test "$aix_use_runtimelinking" = yes; then
          # Warning - without using the other runtime loading flags (-brtl),
          # -berok will link without error, but may produce a broken library.
          _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
          # Determine the default libpath from the value encoded in an empty
          # executable.
          _LT_SYS_MODULE_PATH_AIX
          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
 
          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
        else
          if test "$host_cpu" = ia64; then
            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
            _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
            _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
          else
            # Determine the default libpath from the value encoded in an
            # empty executable.
            _LT_SYS_MODULE_PATH_AIX
            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
            # Warning - without using the other run time loading flags,
            # -berok will link without error, but may produce a broken library.
            _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
            _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
            # Exported symbols can be pulled into shared objects from archives
            _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
            _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
            # This is similar to how AIX traditionally builds its shared
            # libraries.
            _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
          fi
        fi
        ;;
 
      beos*)
        if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
          _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
          # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
          # support --undefined.  This deserves some investigation.  FIXME
          _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
        else
          _LT_TAGVAR(ld_shlibs, $1)=no
        fi
        ;;
 
      chorus*)
        case $cc_basename in
          *)
          # FIXME: insert proper C++ library support
          _LT_TAGVAR(ld_shlibs, $1)=no
          ;;
        esac
        ;;
 
      cygwin* | mingw* | pw32*)
        # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
        # as there is no search path for DLLs.
        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
        _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
        _LT_TAGVAR(always_export_symbols, $1)=no
        _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
 
        if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
          # If the export-symbols file already is a .def file (1st line
          # is EXPORTS), use it as is; otherwise, prepend...
          _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
            cp $export_symbols $output_objdir/$soname.def;
          else
            echo EXPORTS > $output_objdir/$soname.def;
            cat $export_symbols >> $output_objdir/$soname.def;
          fi~
          $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
        else
          _LT_TAGVAR(ld_shlibs, $1)=no
        fi
        ;;
      darwin* | rhapsody*)
        case $host_os in
          rhapsody* | darwin1.[[012]])
            _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
            ;;
          *) # Darwin 1.3 on
            case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
              10.[[012]])
                _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
                ;;
              10.*)
                _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
                ;;
            esac
            ;;
        esac
        _LT_TAGVAR(archive_cmds_need_lc, $1)=no
        _LT_TAGVAR(hardcode_direct, $1)=no
        _LT_TAGVAR(hardcode_automatic, $1)=yes
        _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
        _LT_TAGVAR(whole_archive_flag_spec, $1)=''
        _LT_TAGVAR(link_all_deplibs, $1)=yes
 
        if test "$GXX" = yes ; then
          AC_CACHE_VAL([lt_cv_apple_cc_single_mod],
          [lt_cv_apple_cc_single_mod=no
          if test -z "${LT_MULTI_MODULE}"; then
            # By default we will add the -single_module flag. You can override
            # by either setting the environment variable LT_MULTI_MODULE
            # non-empty at configure time, or by adding -multi-module to the
            # link flags.
            echo "int foo(void){return 1;}" > conftest.c
            $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
                -dynamiclib ${wl}-single_module conftest.c
            if test -f libconftest.dylib; then
                lt_cv_apple_cc_single_mod=yes
                rm libconftest.dylib
            fi
            rm conftest.$ac_ext
          fi])
          output_verbose_link_cmd=echo
          if test "X$lt_cv_apple_cc_single_mod" = Xyes ; then
           _LT_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
            _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
          else
            _LT_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
            _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
          fi
          _LT_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
          _LT_TAGVAR(module_expsym_cmds, $1)='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
        else
          case $cc_basename in
            xlc*)
              output_verbose_link_cmd=echo
              _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`$ECHO "$rpath/$soname"` $verstring'
              _LT_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
              # Don't fix this by using the ld -exported_symbols_list flag,
              # it doesn't exist in older darwin lds
              _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
              _LT_TAGVAR(module_expsym_cmds, $1)='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
              ;;
            *)
              _LT_TAGVAR(ld_shlibs, $1)=no
              ;;
          esac
        fi
        ;;
 
      dgux*)
        case $cc_basename in
          ec++*)
            # FIXME: insert proper C++ library support
            _LT_TAGVAR(ld_shlibs, $1)=no
            ;;
          ghcx*)
            # Green Hills C++ Compiler
            # FIXME: insert proper C++ library support
            _LT_TAGVAR(ld_shlibs, $1)=no
            ;;
          *)
            # FIXME: insert proper C++ library support
            _LT_TAGVAR(ld_shlibs, $1)=no
            ;;
        esac
        ;;
 
      freebsd[[12]]*)
        # C++ shared libraries reported to be fairly broken before
        # switch to ELF
        _LT_TAGVAR(ld_shlibs, $1)=no
        ;;
 
      freebsd-elf*)
        _LT_TAGVAR(archive_cmds_need_lc, $1)=no
        ;;
 
      freebsd* | dragonfly*)
        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
        # conventions
        _LT_TAGVAR(ld_shlibs, $1)=yes
        ;;
 
      gnu*)
        ;;
 
      hpux9*)
        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
        _LT_TAGVAR(hardcode_direct, $1)=yes
        _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
                                             # but as the default
                                             # location of the library.
 
        case $cc_basename in
          CC*)
            # FIXME: insert proper C++ library support
            _LT_TAGVAR(ld_shlibs, $1)=no
            ;;
          aCC*)
            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
            # Commands to make compiler produce verbose output that lists
            # what "hidden" libraries, object files and flags are used when
            # linking a shared library.
            #
            # There doesn't appear to be a way to prevent this compiler from
            # explicitly linking system object files so we need to strip them
            # from the output so that they don't get included in the library
            # dependencies.
            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
            ;;
          *)
            if test "$GXX" = yes; then
              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
            else
              # FIXME: insert proper C++ library support
              _LT_TAGVAR(ld_shlibs, $1)=no
            fi
            ;;
        esac
        ;;
 
      hpux10*|hpux11*)
        if test $with_gnu_ld = no; then
          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
          _LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
          case $host_cpu in
            hppa*64*|ia64*)
              ;;
            *)
              _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
              ;;
          esac
        fi
        case $host_cpu in
          hppa*64*|ia64*)
            _LT_TAGVAR(hardcode_direct, $1)=no
            _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
            ;;
          *)
            _LT_TAGVAR(hardcode_direct, $1)=yes
            _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
            _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
                                                 # but as the default
                                                 # location of the library.
            ;;
        esac
 
        case $cc_basename in
          CC*)
            # FIXME: insert proper C++ library support
            _LT_TAGVAR(ld_shlibs, $1)=no
            ;;
          aCC*)
            case $host_cpu in
              hppa*64*)
                _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
                ;;
              ia64*)
                _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
                ;;
              *)
                _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
                ;;
            esac
            # Commands to make compiler produce verbose output that lists
            # what "hidden" libraries, object files and flags are used when
            # linking a shared library.
            #
            # There doesn't appear to be a way to prevent this compiler from
            # explicitly linking system object files so we need to strip them
            # from the output so that they don't get included in the library
            # dependencies.
            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
            ;;
          *)
            if test "$GXX" = yes; then
              if test $with_gnu_ld = no; then
                case $host_cpu in
                  hppa*64*)
                    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
                    ;;
                  ia64*)
                    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
                    ;;
                  *)
                    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
                    ;;
                esac
              fi
            else
              # FIXME: insert proper C++ library support
              _LT_TAGVAR(ld_shlibs, $1)=no
            fi
            ;;
        esac
        ;;
 
      interix[[3-9]]*)
        _LT_TAGVAR(hardcode_direct, $1)=no
        _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
        # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
        # Instead, shared libraries are loaded at an image base (0x10000000 by
        # default) and relocated if they conflict, which is a slow very memory
        # consuming and fragmenting process.  To avoid this, we pick a random,
        # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
        # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
        _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
        ;;
      irix5* | irix6*)
        case $cc_basename in
          CC*)
            # SGI C++
            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
 
            # Archives containing C++ object files must be created using
            # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
            # necessary to make sure instantiated templates are included
            # in the archive.
            _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
            ;;
          *)
            if test "$GXX" = yes; then
              if test "$with_gnu_ld" = no; then
                _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
              else
                _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
              fi
            fi
            _LT_TAGVAR(link_all_deplibs, $1)=yes
            ;;
        esac
        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
        _LT_TAGVAR(inherit_rpath, $1)=yes
        ;;
 
      linux* | k*bsd*-gnu)
        case $cc_basename in
          KCC*)
            # Kuck and Associates, Inc. (KAI) C++ Compiler
 
            # KCC will only create a shared library if the output file
            # ends with ".so" (or ".sl" for HP-UX), so rename the library
            # to its proper name (with version) after linking.
            _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
            _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
            # Commands to make compiler produce verbose output that lists
            # what "hidden" libraries, object files and flags are used when
            # linking a shared library.
            #
            # There doesn't appear to be a way to prevent this compiler from
            # explicitly linking system object files so we need to strip them
            # from the output so that they don't get included in the library
            # dependencies.
            output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
 
            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
            _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
 
            # Archives containing C++ object files must be created using
            # "CC -Bstatic", where "CC" is the KAI C++ compiler.
            _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
            ;;
          icpc* | ecpc* )
            # Intel C++
            with_gnu_ld=yes
            # version 8.0 and above of icpc choke on multiply defined symbols
            # if we add $predep_objects and $postdep_objects, however 7.1 and
            # earlier do not add the objects themselves.
            case `$CC -V 2>&1` in
              *"Version 7."*)
                _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
                _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
                ;;
              *)  # Version 8.0 or newer
                tmp_idyn=
                case $host_cpu in
                  ia64*) tmp_idyn=' -i_dynamic';;
                esac
                _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
                _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
                ;;
            esac
            _LT_TAGVAR(archive_cmds_need_lc, $1)=no
            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
            _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
            _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
            ;;
          pgCC*)
            # Portland Group C++ compiler
            case `$CC -V` in
            *pgCC\ [[1-5]]*)
              _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
                rm -rf $tpldir~
                $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
                compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
              _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
                rm -rf $tpldir~
                $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
                $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
                $RANLIB $oldlib'
              _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
                rm -rf $tpldir~
                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
              _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
                rm -rf $tpldir~
                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
              ;;
            *) # Version 6 will use weak symbols
              _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
              _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
              ;;
            esac
 
            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
            _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
            _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
            ;;
          cxx*)
            # Compaq C++
            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
            _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
 
            runpath_var=LD_RUN_PATH
            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
            _LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
            # Commands to make compiler produce verbose output that lists
            # what "hidden" libraries, object files and flags are used when
            # linking a shared library.
            #
            # There doesn't appear to be a way to prevent this compiler from
            # explicitly linking system object files so we need to strip them
            # from the output so that they don't get included in the library
            # dependencies.
            output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
            ;;
          *)
            case `$CC -V 2>&1 | sed 5q` in
            *Sun\ C*)
              # Sun C++ 5.9
              _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
              _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
              _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
              _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
              _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
              _LT_TAGVAR(compiler_needs_object, $1)=yes
 
              # Not sure whether something based on
              # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
              # would be better.
              output_verbose_link_cmd='echo'
 
              # Archives containing C++ object files must be created using
              # "CC -xar", where "CC" is the Sun C++ compiler.  This is
              # necessary to make sure instantiated templates are included
              # in the archive.
              _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
              ;;
            esac
            ;;
        esac
        ;;
 
      lynxos*)
        # FIXME: insert proper C++ library support
        _LT_TAGVAR(ld_shlibs, $1)=no
        ;;
 
      m88k*)
        # FIXME: insert proper C++ library support
        _LT_TAGVAR(ld_shlibs, $1)=no
        ;;
 
      mvs*)
        case $cc_basename in
          cxx*)
            # FIXME: insert proper C++ library support
            _LT_TAGVAR(ld_shlibs, $1)=no
            ;;
          *)
            # FIXME: insert proper C++ library support
            _LT_TAGVAR(ld_shlibs, $1)=no
            ;;
        esac
        ;;
 
      netbsd*)
        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
          _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
          wlarc=
          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
          _LT_TAGVAR(hardcode_direct, $1)=yes
          _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
        fi
        # Workaround some broken pre-1.5 toolchains
        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
        ;;
 
      *nto* | *qnx*)
        _LT_TAGVAR(ld_shlibs, $1)=yes
        ;;
 
      openbsd2*)
        # C++ shared libraries are fairly broken
        _LT_TAGVAR(ld_shlibs, $1)=no
        ;;
 
      openbsd*)
        _LT_TAGVAR(hardcode_direct, $1)=yes
        _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
        if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
          _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
          _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
        fi
        output_verbose_link_cmd=echo
        ;;
 
      osf3* | osf4* | osf5*)
        case $cc_basename in
          KCC*)
            # Kuck and Associates, Inc. (KAI) C++ Compiler
 
            # KCC will only create a shared library if the output file
            # ends with ".so" (or ".sl" for HP-UX), so rename the library
            # to its proper name (with version) after linking.
            _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
 
            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
            _LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
            # Archives containing C++ object files must be created using
            # the KAI C++ compiler.
            case $host in
              osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
              *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
            esac
            ;;
          RCC*)
            # Rational C++ 2.4.1
            # FIXME: insert proper C++ library support
            _LT_TAGVAR(ld_shlibs, $1)=no
            ;;
          cxx*)
            case $host in
              osf3*)
                _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
                _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
                _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
                ;;
              *)
                _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
                _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
                _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
                  echo "-hidden">> $lib.exp~
                  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
                  $RM $lib.exp'
                _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
                ;;
            esac
 
            _LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
            # Commands to make compiler produce verbose output that lists
            # what "hidden" libraries, object files and flags are used when
            # linking a shared library.
            #
            # There doesn't appear to be a way to prevent this compiler from
            # explicitly linking system object files so we need to strip them
            # from the output so that they don't get included in the library
            # dependencies.
            output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
            ;;
          *)
            if test "$GXX" = yes && test "$with_gnu_ld" = no; then
              _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
              case $host in
                osf3*)
                  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
                  ;;
                *)
                  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
                  ;;
              esac
 
              _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
              _LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
              # Commands to make compiler produce verbose output that lists
              # what "hidden" libraries, object files and flags are used when
              # linking a shared library.
              output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
 
            else
              # FIXME: insert proper C++ library support
              _LT_TAGVAR(ld_shlibs, $1)=no
            fi
            ;;
        esac
        ;;
 
      psos*)
        # FIXME: insert proper C++ library support
        _LT_TAGVAR(ld_shlibs, $1)=no
        ;;
 
      sunos4*)
        case $cc_basename in
          CC*)
            # Sun C++ 4.x
            # FIXME: insert proper C++ library support
            _LT_TAGVAR(ld_shlibs, $1)=no
            ;;
          lcc*)
            # Lucid
            # FIXME: insert proper C++ library support
            _LT_TAGVAR(ld_shlibs, $1)=no
            ;;
          *)
            # FIXME: insert proper C++ library support
            _LT_TAGVAR(ld_shlibs, $1)=no
            ;;
        esac
        ;;
 
      solaris*)
        case $cc_basename in
          CC*)
            # Sun C++ 4.2, 5.x and Centerline C++
            _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
            _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
            _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
            _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
              $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
            _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
            case $host_os in
              solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
              *)
                # The compiler driver will combine and reorder linker options,
                # but understands `-z linker_flag'.
                # Supported since Solaris 2.6 (maybe 2.5.1?)
                _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
                ;;
            esac
            _LT_TAGVAR(link_all_deplibs, $1)=yes
 
            output_verbose_link_cmd='echo'
 
            # Archives containing C++ object files must be created using
            # "CC -xar", where "CC" is the Sun C++ compiler.  This is
            # necessary to make sure instantiated templates are included
            # in the archive.
            _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
            ;;
          gcx*)
            # Green Hills C++ Compiler
            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
 
            # The C++ compiler must be used to create the archive.
            _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
            ;;
          *)
            # GNU C++ compiler with Solaris linker
            if test "$GXX" = yes && test "$with_gnu_ld" = no; then
              _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
              if $CC --version | $GREP -v '^2\.7' > /dev/null; then
                _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
                _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
                  $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
                # Commands to make compiler produce verbose output that lists
                # what "hidden" libraries, object files and flags are used when
                # linking a shared library.
                output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
              else
                # g++ 2.7 appears to require `-G' NOT `-shared' on this
                # platform.
                _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
                _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
                  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
                # Commands to make compiler produce verbose output that lists
                # what "hidden" libraries, object files and flags are used when
                # linking a shared library.
                output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
              fi
 
              _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
              case $host_os in
                solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
                *)
                  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
                  ;;
              esac
            fi
            ;;
        esac
        ;;
 
    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
      runpath_var='LD_RUN_PATH'
 
      case $cc_basename in
        CC*)
          _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
          ;;
        *)
          _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
          ;;
      esac
      ;;
 
      sysv5* | sco3.2v5* | sco5v6*)
        # Note: We can NOT use -z defs as we might desire, because we do not
        # link with -lc, and that would cause any symbols used from libc to
        # always be unresolved, which means just about no library would
        # ever link correctly.  If we're not using GNU ld we use -z text
        # though, which does catch some bad symbols but isn't as heavy-handed
        # as -z defs.
        _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
        _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
        _LT_TAGVAR(archive_cmds_need_lc, $1)=no
        _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
        _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
        _LT_TAGVAR(link_all_deplibs, $1)=yes
        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
        runpath_var='LD_RUN_PATH'
 
        case $cc_basename in
          CC*)
            _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
            _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
            ;;
          *)
            _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
            _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
            ;;
        esac
      ;;
 
      tandem*)
        case $cc_basename in
          NCC*)
            # NonStop-UX NCC 3.20
            # FIXME: insert proper C++ library support
            _LT_TAGVAR(ld_shlibs, $1)=no
            ;;
          *)
            # FIXME: insert proper C++ library support
            _LT_TAGVAR(ld_shlibs, $1)=no
            ;;
        esac
        ;;
 
      vxworks*)
        # FIXME: insert proper C++ library support
        _LT_TAGVAR(ld_shlibs, $1)=no
        ;;
 
      *)
        # FIXME: insert proper C++ library support
        _LT_TAGVAR(ld_shlibs, $1)=no
        ;;
    esac
 
    AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
    test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
 
    _LT_TAGVAR(GCC, $1)="$GXX"
    _LT_TAGVAR(LD, $1)="$LD"
 
    ## CAVEAT EMPTOR:
    ## There is no encapsulation within the following macros, do not change
    ## the running order or otherwise move them around unless you know exactly
    ## what you are doing...
    _LT_SYS_HIDDEN_LIBDEPS($1)
    _LT_COMPILER_PIC($1)
    _LT_COMPILER_C_O($1)
    _LT_COMPILER_FILE_LOCKS($1)
    _LT_LINKER_SHLIBS($1)
    _LT_SYS_DYNAMIC_LINKER($1)
    _LT_LINKER_HARDCODE_LIBPATH($1)
 
    _LT_CONFIG($1)
  fi # test -n "$compiler"
 
  CC=$lt_save_CC
  LDCXX=$LD
  LD=$lt_save_LD
  GCC=$lt_save_GCC
  with_gnu_ld=$lt_save_with_gnu_ld
  lt_cv_path_LDCXX=$lt_cv_path_LD
  lt_cv_path_LD=$lt_save_path_LD
  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
fi # test "$_lt_caught_CXX_error" != yes
 
AC_LANG_POP
])# _LT_LANG_CXX_CONFIG
 
 
# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
# ---------------------------------
# Figure out "hidden" library dependencies from verbose
# compiler output when linking a shared library.
# Parse the compiler output and extract the necessary
# objects, libraries and library flags.
m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
# Dependencies to place before and after the object being linked:
_LT_TAGVAR(predep_objects, $1)=
_LT_TAGVAR(postdep_objects, $1)=
_LT_TAGVAR(predeps, $1)=
_LT_TAGVAR(postdeps, $1)=
_LT_TAGVAR(compiler_lib_search_path, $1)=
 
dnl we can't use the lt_simple_compile_test_code here,
dnl because it contains code intended for an executable,
dnl not a library.  It's possible we should let each
dnl tag define a new lt_????_link_test_code variable,
dnl but it's only used here...
m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
int a;
void foo (void) { a = 0; }
_LT_EOF
], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
class Foo
{
public:
  Foo (void) { a = 0; }
private:
  int a;
};
_LT_EOF
], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
      subroutine foo
      implicit none
      integer*4 a
      a=0
      return
      end
_LT_EOF
], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
      subroutine foo
      implicit none
      integer a
      a=0
      return
      end
_LT_EOF
], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
public class foo {
  private int a;
  public void bar (void) {
    a = 0;
  }
};
_LT_EOF
])
dnl Parse the compiler output and extract the necessary
dnl objects, libraries and library flags.
if AC_TRY_EVAL(ac_compile); then
  # Parse the compiler output and extract the necessary
  # objects, libraries and library flags.
 
  # Sentinel used to keep track of whether or not we are before
  # the conftest object file.
  pre_test_object_deps_done=no
 
  # The `*' in the case matches for architectures that use `case' in
  # $output_verbose_cmd can trigger glob expansion during the loop
  # eval without this substitution.
  output_verbose_link_cmd=`$ECHO "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
 
  for p in `eval $output_verbose_link_cmd`; do
    case $p in
 
    -L* | -R* | -l*)
       # Some compilers place space between "-{L,R}" and the path.
       # Remove the space.
       if test $p = "-L" ||
          test $p = "-R"; then
         prev=$p
         continue
       else
         prev=
       fi
 
       if test "$pre_test_object_deps_done" = no; then
         case $p in
         -L* | -R*)
           # Internal compiler library paths should come after those
           # provided the user.  The postdeps already come after the
           # user supplied libs so there is no need to process them.
           if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
             _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
           else
             _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
           fi
           ;;
         # The "-l" case would never come before the object being
         # linked, so don't bother handling this case.
         esac
       else
         if test -z "$_LT_TAGVAR(postdeps, $1)"; then
           _LT_TAGVAR(postdeps, $1)="${prev}${p}"
         else
           _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
         fi
       fi
       ;;
 
    *.$objext)
       # This assumes that the test object file only shows up
       # once in the compiler output.
       if test "$p" = "conftest.$objext"; then
         pre_test_object_deps_done=yes
         continue
       fi
 
       if test "$pre_test_object_deps_done" = no; then
         if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
           _LT_TAGVAR(predep_objects, $1)="$p"
         else
           _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
         fi
       else
         if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
           _LT_TAGVAR(postdep_objects, $1)="$p"
         else
           _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
         fi
       fi
       ;;
 
    *) ;; # Ignore the rest.
 
    esac
  done
 
  # Clean up.
  rm -f a.out a.exe
else
  echo "libtool.m4: error: problem compiling $1 test program"
fi
 
$RM -f confest.$objext
 
# PORTME: override above test on systems where it is broken
m4_if([$1], [CXX],
[case $host_os in
interix[[3-9]]*)
  # Interix 3.5 installs completely hosed .la files for C++, so rather than
  # hack all around it, let's just trust "g++" to DTRT.
  _LT_TAGVAR(predep_objects,$1)=
  _LT_TAGVAR(postdep_objects,$1)=
  _LT_TAGVAR(postdeps,$1)=
  ;;
 
linux*)
  case `$CC -V 2>&1 | sed 5q` in
  *Sun\ C*)
    # Sun C++ 5.9
 
    # The more standards-conforming stlport4 library is
    # incompatible with the Cstd library. Avoid specifying
    # it if it's in CXXFLAGS. Ignore libCrun as
    # -library=stlport4 depends on it.
    case " $CXX $CXXFLAGS " in
    *" -library=stlport4 "*)
      solaris_use_stlport4=yes
      ;;
    esac
 
    if test "$solaris_use_stlport4" != yes; then
      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
    fi
    ;;
  esac
  ;;
 
solaris*)
  case $cc_basename in
  CC*)
    # The more standards-conforming stlport4 library is
    # incompatible with the Cstd library. Avoid specifying
    # it if it's in CXXFLAGS. Ignore libCrun as
    # -library=stlport4 depends on it.
    case " $CXX $CXXFLAGS " in
    *" -library=stlport4 "*)
      solaris_use_stlport4=yes
      ;;
    esac
 
    # Adding this requires a known-good setup of shared libraries for
    # Sun compiler versions before 5.6, else PIC objects from an old
    # archive will be linked into the output, leading to subtle bugs.
    if test "$solaris_use_stlport4" != yes; then
      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
    fi
    ;;
  esac
  ;;
esac
])
 
case " $_LT_TAGVAR(postdeps, $1) " in
*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
esac
_LT_TAGDECL([], [predep_objects], [1],
    [Dependencies to place before and after the objects being linked to
    create a shared library])
_LT_TAGDECL([], [postdep_objects], [1])
_LT_TAGDECL([], [predeps], [1])
_LT_TAGDECL([], [postdeps], [1])
_LT_TAGDECL([], [compiler_lib_search_path], [1],
    [The library search path used internally by the compiler when linking
    a shared library])
])# _LT_SYS_HIDDEN_LIBDEPS
 
 
# _LT_PROG_F77
# ------------
# Since AC_PROG_F77 is broken, in that it returns the empty string
# if there is no fortran compiler, we have our own version here.
m4_defun([_LT_PROG_F77],
[
pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
AC_PROG_F77
if test -z "$F77" || test "X$F77" = "Xno"; then
  _lt_disable_F77=yes
fi
popdef([AC_MSG_ERROR])
])# _LT_PROG_F77
 
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([_LT_PROG_F77], [])
 
 
# _LT_LANG_F77_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for a Fortran 77 compiler are
# suitably defined.  These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to `libtool'.
m4_defun([_LT_LANG_F77_CONFIG],
[AC_REQUIRE([_LT_PROG_F77])dnl
AC_LANG_PUSH(Fortran 77)
 
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(archive_expsym_cmds, $1)=
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=no
_LT_TAGVAR(inherit_rpath, $1)=no
_LT_TAGVAR(module_cmds, $1)=
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
 
# Source file extension for f77 test sources.
ac_ext=f
 
# Object file extension for compiled f77 test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
 
# No sense in running all these tests if we already determined that
# the F77 compiler isn't working.  Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
if test "$_lt_disable_F77" != yes; then
  # Code to be used in simple compile tests
  lt_simple_compile_test_code="\
      subroutine t
      return
      end
"
 
  # Code to be used in simple link tests
  lt_simple_link_test_code="\
      program t
      end
"
 
  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
  _LT_TAG_COMPILER
 
  # save warnings/boilerplate of simple test code
  _LT_COMPILER_BOILERPLATE
  _LT_LINKER_BOILERPLATE
 
  # Allow CC to be a program name with arguments.
  lt_save_CC="$CC"
  CC=${F77-"f77"}
  compiler=$CC
  _LT_TAGVAR(compiler, $1)=$CC
  _LT_CC_BASENAME([$compiler])
 
  if test -n "$compiler"; then
    AC_MSG_CHECKING([if libtool supports shared libraries])
    AC_MSG_RESULT([$can_build_shared])
 
    AC_MSG_CHECKING([whether to build shared libraries])
    test "$can_build_shared" = "no" && enable_shared=no
 
    # On AIX, shared libraries and static libraries use the same namespace, and
    # are all built from PIC.
    case $host_os in
      aix3*)
        test "$enable_shared" = yes && enable_static=no
        if test -n "$RANLIB"; then
          archive_cmds="$archive_cmds~\$RANLIB \$lib"
          postinstall_cmds='$RANLIB $lib'
        fi
        ;;
      aix[[4-9]]*)
        if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
          test "$enable_shared" = yes && enable_static=no
        fi
        ;;
    esac
    AC_MSG_RESULT([$enable_shared])
 
    AC_MSG_CHECKING([whether to build static libraries])
    # Make sure either enable_shared or enable_static is yes.
    test "$enable_shared" = yes || enable_static=yes
    AC_MSG_RESULT([$enable_static])
 
    _LT_TAGVAR(GCC, $1)="$G77"
    _LT_TAGVAR(LD, $1)="$LD"
 
    ## CAVEAT EMPTOR:
    ## There is no encapsulation within the following macros, do not change
    ## the running order or otherwise move them around unless you know exactly
    ## what you are doing...
    _LT_COMPILER_PIC($1)
    _LT_COMPILER_C_O($1)
    _LT_COMPILER_FILE_LOCKS($1)
    _LT_LINKER_SHLIBS($1)
    _LT_SYS_DYNAMIC_LINKER($1)
    _LT_LINKER_HARDCODE_LIBPATH($1)
 
    _LT_CONFIG($1)
  fi # test -n "$compiler"
 
  CC="$lt_save_CC"
fi # test "$_lt_disable_F77" != yes
 
AC_LANG_POP
])# _LT_LANG_F77_CONFIG
 
 
# _LT_PROG_FC
# -----------
# Since AC_PROG_FC is broken, in that it returns the empty string
# if there is no fortran compiler, we have our own version here.
m4_defun([_LT_PROG_FC],
[
pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
AC_PROG_FC
if test -z "$FC" || test "X$FC" = "Xno"; then
  _lt_disable_FC=yes
fi
popdef([AC_MSG_ERROR])
])# _LT_PROG_FC
 
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([_LT_PROG_FC], [])
 
 
# _LT_LANG_FC_CONFIG([TAG])
# -------------------------
# Ensure that the configuration variables for a Fortran compiler are
# suitably defined.  These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to `libtool'.
m4_defun([_LT_LANG_FC_CONFIG],
[AC_REQUIRE([_LT_PROG_FC])dnl
AC_LANG_PUSH(Fortran)
 
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(archive_expsym_cmds, $1)=
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=no
_LT_TAGVAR(inherit_rpath, $1)=no
_LT_TAGVAR(module_cmds, $1)=
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
 
# Source file extension for fc test sources.
ac_ext=${ac_fc_srcext-f}
 
# Object file extension for compiled fc test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
 
# No sense in running all these tests if we already determined that
# the FC compiler isn't working.  Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
if test "$_lt_disable_FC" != yes; then
  # Code to be used in simple compile tests
  lt_simple_compile_test_code="\
      subroutine t
      return
      end
"
 
  # Code to be used in simple link tests
  lt_simple_link_test_code="\
      program t
      end
"
 
  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
  _LT_TAG_COMPILER
 
  # save warnings/boilerplate of simple test code
  _LT_COMPILER_BOILERPLATE
  _LT_LINKER_BOILERPLATE
 
  # Allow CC to be a program name with arguments.
  lt_save_CC="$CC"
  CC=${FC-"f95"}
  compiler=$CC
  _LT_TAGVAR(compiler, $1)=$CC
  _LT_CC_BASENAME([$compiler])
 
  if test -n "$compiler"; then
    AC_MSG_CHECKING([if libtool supports shared libraries])
    AC_MSG_RESULT([$can_build_shared])
 
    AC_MSG_CHECKING([whether to build shared libraries])
    test "$can_build_shared" = "no" && enable_shared=no
 
    # On AIX, shared libraries and static libraries use the same namespace, and
    # are all built from PIC.
    case $host_os in
      aix3*)
        test "$enable_shared" = yes && enable_static=no
        if test -n "$RANLIB"; then
          archive_cmds="$archive_cmds~\$RANLIB \$lib"
          postinstall_cmds='$RANLIB $lib'
        fi
        ;;
      aix[[4-9]]*)
        if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
          test "$enable_shared" = yes && enable_static=no
        fi
        ;;
    esac
    AC_MSG_RESULT([$enable_shared])
 
    AC_MSG_CHECKING([whether to build static libraries])
    # Make sure either enable_shared or enable_static is yes.
    test "$enable_shared" = yes || enable_static=yes
    AC_MSG_RESULT([$enable_static])
 
    _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
    _LT_TAGVAR(LD, $1)="$LD"
 
    ## CAVEAT EMPTOR:
    ## There is no encapsulation within the following macros, do not change
    ## the running order or otherwise move them around unless you know exactly
    ## what you are doing...
    _LT_SYS_HIDDEN_LIBDEPS($1)
    _LT_COMPILER_PIC($1)
    _LT_COMPILER_C_O($1)
    _LT_COMPILER_FILE_LOCKS($1)
    _LT_LINKER_SHLIBS($1)
    _LT_SYS_DYNAMIC_LINKER($1)
    _LT_LINKER_HARDCODE_LIBPATH($1)
 
    _LT_CONFIG($1)
  fi # test -n "$compiler"
 
  CC="$lt_save_CC"
fi # test "$_lt_disable_FC" != yes
 
AC_LANG_POP
])# _LT_LANG_FC_CONFIG
 
 
# _LT_LANG_GCJ_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for the GNU Java Compiler compiler
# are suitably defined.  These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to `libtool'.
m4_defun([_LT_LANG_GCJ_CONFIG],
[AC_REQUIRE([LT_PROG_GCJ])dnl
AC_LANG_SAVE
 
# Source file extension for Java test sources.
ac_ext=java
 
# Object file extension for compiled Java test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
 
# Code to be used in simple compile tests
lt_simple_compile_test_code="class foo {}"
 
# Code to be used in simple link tests
lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
 
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
 
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
 
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
CC=${GCJ-"gcj"}
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
 
# GCJ did not exist at the time GCC didn't implicitly link libc in.
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
 
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
 
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
if test -n "$compiler"; then
  _LT_COMPILER_NO_RTTI($1)
  _LT_COMPILER_PIC($1)
  _LT_COMPILER_C_O($1)
  _LT_COMPILER_FILE_LOCKS($1)
  _LT_LINKER_SHLIBS($1)
  _LT_SYS_DYNAMIC_LINKER($1)
  _LT_LINKER_HARDCODE_LIBPATH($1)
 
  _LT_CONFIG($1)
fi
 
AC_LANG_RESTORE
CC="$lt_save_CC"
])# _LT_LANG_GCJ_CONFIG
 
 
# _LT_LANG_RC_CONFIG([TAG])
# -------------------------
# Ensure that the configuration variables for the Windows resource compiler
# are suitably defined.  These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to `libtool'.
m4_defun([_LT_LANG_RC_CONFIG],
[AC_REQUIRE([LT_PROG_RC])dnl
AC_LANG_SAVE
 
# Source file extension for RC test sources.
ac_ext=rc
 
# Object file extension for compiled RC test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
 
# Code to be used in simple compile tests
lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
 
# Code to be used in simple link tests
lt_simple_link_test_code="$lt_simple_compile_test_code"
 
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
 
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
 
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
CC=${RC-"windres"}
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
 
if test -n "$compiler"; then
  :
  _LT_CONFIG($1)
fi
 
AC_LANG_RESTORE
CC="$lt_save_CC"
])# _LT_LANG_RC_CONFIG
 
 
# LT_PROG_GCJ
# -----------
AC_DEFUN([LT_PROG_GCJ],
[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
  [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
    [AC_CHECK_TOOL(GCJ, gcj,)
      test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
      AC_SUBST(GCJFLAGS)])])[]dnl
])
 
# Old name:
AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
 
 
# LT_PROG_RC
# ----------
AC_DEFUN([LT_PROG_RC],
[AC_CHECK_TOOL(RC, windres,)
])
 
# Old name:
AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([LT_AC_PROG_RC], [])
 
 
# _LT_DECL_EGREP
# --------------
# If we don't have a new enough Autoconf to choose the best grep
# available, choose the one first in the user's PATH.
m4_defun([_LT_DECL_EGREP],
[AC_REQUIRE([AC_PROG_EGREP])dnl
AC_REQUIRE([AC_PROG_FGREP])dnl
test -z "$GREP" && GREP=grep
_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
_LT_DECL([], [EGREP], [1], [An ERE matcher])
_LT_DECL([], [FGREP], [1], [A literal string matcher])
dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
AC_SUBST([GREP])
])
 
 
# _LT_DECL_SED
# ------------
# Check for a fully-functional sed program, that truncates
# as few characters as possible.  Prefer GNU sed if found.
m4_defun([_LT_DECL_SED],
[AC_PROG_SED
test -z "$SED" && SED=sed
Xsed="$SED -e 1s/^X//"
_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
    [Sed that helps us avoid accidentally triggering echo(1) options like -n])
])# _LT_DECL_SED
 
m4_ifndef([AC_PROG_SED], [
############################################################
# NOTE: This macro has been submitted for inclusion into   #
#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
#  a released version of Autoconf we should remove this    #
#  macro and use it instead.                               #
############################################################
 
m4_defun([AC_PROG_SED],
[AC_MSG_CHECKING([for a sed that does not truncate output])
AC_CACHE_VAL(lt_cv_path_SED,
[# Loop through the user's path and test for sed and gsed.
# Then use that list of sed's as ones to test for truncation.
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for lt_ac_prog in sed gsed; do
    for ac_exec_ext in '' $ac_executable_extensions; do
      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
      fi
    done
  done
done
IFS=$as_save_IFS
lt_ac_max=0
lt_ac_count=0
# Add /usr/xpg4/bin/sed as it is typically found on Solaris
# along with /bin/sed that truncates output.
for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
  test ! -f $lt_ac_sed && continue
  cat /dev/null > conftest.in
  lt_ac_count=0
  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
  # Check for GNU sed and select it if it is found.
  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
    lt_cv_path_SED=$lt_ac_sed
    break
  fi
  while true; do
    cat conftest.in conftest.in >conftest.tmp
    mv conftest.tmp conftest.in
    cp conftest.in conftest.nl
    echo >>conftest.nl
    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
    cmp -s conftest.out conftest.nl || break
    # 10000 chars as input seems more than enough
    test $lt_ac_count -gt 10 && break
    lt_ac_count=`expr $lt_ac_count + 1`
    if test $lt_ac_count -gt $lt_ac_max; then
      lt_ac_max=$lt_ac_count
      lt_cv_path_SED=$lt_ac_sed
    fi
  done
done
])
SED=$lt_cv_path_SED
AC_SUBST([SED])
AC_MSG_RESULT([$SED])
])#AC_PROG_SED
])#m4_ifndef
 
# Old name:
AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([LT_AC_PROG_SED], [])
 
 
# _LT_CHECK_SHELL_FEATURES
# ------------------------
# Find out whether the shell is Bourne or XSI compatible,
# or has some other useful features.
m4_defun([_LT_CHECK_SHELL_FEATURES],
[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
# Try some XSI features
xsi_shell=no
( _lt_dummy="a/b/c"
  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
      = c,a/b,, ) >/dev/null 2>&1 \
  && xsi_shell=yes
AC_MSG_RESULT([$xsi_shell])
_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
 
AC_MSG_CHECKING([whether the shell understands "+="])
lt_shell_append=no
( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
    >/dev/null 2>&1 \
  && lt_shell_append=yes
AC_MSG_RESULT([$lt_shell_append])
_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
 
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
  lt_unset=unset
else
  lt_unset=false
fi
_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
 
# test EBCDIC or ASCII
case `echo X|tr X '\101'` in
 A) # ASCII based system
    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
  lt_SP2NL='tr \040 \012'
  lt_NL2SP='tr \015\012 \040\040'
  ;;
 *) # EBCDIC based system
  lt_SP2NL='tr \100 \n'
  lt_NL2SP='tr \r\n \100\100'
  ;;
esac
_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
])# _LT_CHECK_SHELL_FEATURES
 
 
# _LT_PROG_XSI_SHELLFNS
# ---------------------
# Bourne and XSI compatible variants of some useful shell functions.
m4_defun([_LT_PROG_XSI_SHELLFNS],
[case $xsi_shell in
  yes)
    cat << \_LT_EOF >> "$cfgfile"
# func_dirname file append nondir_replacement
# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
# otherwise set result to NONDIR_REPLACEMENT.
func_dirname ()
{
  case ${1} in
    */*) func_dirname_result="${1%/*}${2}" ;;
    *  ) func_dirname_result="${3}" ;;
  esac
}
 
# func_basename file
func_basename ()
{
  func_basename_result="${1##*/}"
}
 
# func_stripname prefix suffix name
# strip PREFIX and SUFFIX off of NAME.
# PREFIX and SUFFIX must not contain globbing or regex special
# characters, hashes, percent signs, but SUFFIX may contain a leading
# dot (in which case that matches only a dot).
func_stripname ()
{
  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
  # positional parameters, so assign one to ordinary parameter first.
  func_stripname_result=${3}
  func_stripname_result=${func_stripname_result#"${1}"}
  func_stripname_result=${func_stripname_result%"${2}"}
}
 
# func_opt_split
func_opt_split ()
{
  func_opt_split_opt=${1%%=*}
  func_opt_split_arg=${1#*=}
}
 
# func_lo2o object
func_lo2o ()
{
  case ${1} in
    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
    *)    func_lo2o_result=${1} ;;
  esac
}
_LT_EOF
    ;;
  *) # Bourne compatible functions.
    cat << \_LT_EOF >> "$cfgfile"
# func_dirname file append nondir_replacement
# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
# otherwise set result to NONDIR_REPLACEMENT.
func_dirname ()
{
  # Extract subdirectory from the argument.
  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
  if test "X$func_dirname_result" = "X${1}"; then
    func_dirname_result="${3}"
  else
    func_dirname_result="$func_dirname_result${2}"
  fi
}
 
# func_basename file
func_basename ()
{
  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
}
 
# func_stripname prefix suffix name
# strip PREFIX and SUFFIX off of NAME.
# PREFIX and SUFFIX must not contain globbing or regex special
# characters, hashes, percent signs, but SUFFIX may contain a leading
# dot (in which case that matches only a dot).
# func_strip_suffix prefix name
func_stripname ()
{
  case ${2} in
    .*) func_stripname_result=`$ECHO "X${3}" \
           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
    *)  func_stripname_result=`$ECHO "X${3}" \
           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
  esac
}
 
# sed scripts:
my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
my_sed_long_arg='1s/^-[[^=]]*=//'
 
# func_opt_split
func_opt_split ()
{
  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
}
 
# func_lo2o object
func_lo2o ()
{
  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
}
_LT_EOF
esac
 
case $lt_shell_append in
  yes)
    cat << \_LT_EOF >> "$cfgfile"
 
# func_append var value
# Append VALUE to the end of shell variable VAR.
func_append ()
{
  eval "$[1]+=\$[2]"
}
_LT_EOF
    ;;
  *)
    cat << \_LT_EOF >> "$cfgfile"
 
# func_append var value
# Append VALUE to the end of shell variable VAR.
func_append ()
{
  eval "$[1]=\$$[1]\$[2]"
}
_LT_EOF
    ;;
  esac
])
Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [binutils-2.18.50/] [libtool.m4] - Blame information for rev 862

Line No.	Rev	Author	Line
1	38	julius	`# libtool.m4 - Configure libtool for the host system. --Autoconf--`
2			`#`
3			`# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,`
4			`# 2006, 2007 Free Software Foundation, Inc.`
5			`#`
6			`# This file is part of GNU Libtool:`
7			`# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996`
8			`#`
9			`# This file is free software; the Free Software Foundation gives`
10			`# unlimited permission to copy and/or distribute it, with or without`
11			`# modifications, as long as this notice is preserved.`
12
13			`m4_define([_LT_COPYING], [dnl`
14			`# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,`
15			`# 2006, 2007 Free Software Foundation, Inc.`
16			`#`
17			`# This file is part of GNU Libtool:`
18			`# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996`
19			`#`
20			`# This program is free software; you can redistribute it and/or modify`
21			`# it under the terms of the GNU General Public License as published by`
22			`# the Free Software Foundation; either version 2 of the License, or`
23			`# (at your option) any later version.`
24			`#`
25			`# This program is distributed in the hope that it will be useful, but`
26			`# WITHOUT ANY WARRANTY; without even the implied warranty of`
27			`# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU`
28			`# General Public License for more details.`
29			`#`
30			`# You should have received a copy of the GNU General Public License`
31			`# along with this program; if not, a copy can be downloaded from`
32			`# http://www.gnu.org/copyleft/gpl.html, or by writing to the Free`
33			`# Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,`
34			`# MA 02110-1301, USA.`
35			`#`
36			`# As a special exception to the GNU General Public License, if you`
37			`# distribute this file as part of a program that contains a`
38			`# configuration script generated by Autoconf, you may include it under`
39			`# the same distribution terms that you use for the rest of that program.`
40			`])`