URL https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [binutils-2.18.50/] [ltmain.sh] - Blame information for rev 851

Go to most recent revision | Details | Compare with Previous | View Log

# Generated from ltmain.m4sh; do not edit by hand
 
# ltmain.sh (GNU libtool 1.2435 2007/03/18 18:44:42) 2.1a
# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions.  There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
 
# Usage: $progname [OPTION]... [MODE-ARG]...
#
# Provide generalized library-building support services.
#
#     --config             show all configuration variables
#     --debug              enable verbose shell tracing
# -n, --dry-run            display commands without modifying any files
#     --features           display basic configuration information and exit
#     --mode=MODE          use operation mode MODE
#     --preserve-dup-deps  don't remove duplicate dependency libraries
#     --quiet, --silent    don't print informational messages
#     --tag=TAG            use configuration variables from tag TAG
# -v, --verbose            print informational messages (default)
#     --version            print version information
# -h, --help               print short or long help message
#
# MODE must be one of the following:
#
#       clean              remove files from the build directory
#       compile            compile a source file into a libtool object
#       execute            automatically set library path, then run a program
#       finish             complete the installation of libtool libraries
#       install            install libraries or executables
#       link               create a library or an executable
#       uninstall          remove libraries from an installed directory
#
# MODE-ARGS vary depending on the MODE.
# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
#
# When reporting a bug, please describe a test case to reproduce it and
# include the following information:
#
#       host-triplet:   $host
#       shell:          $SHELL
#       compiler:               $LTCC
#       compiler flags:         $LTCFLAGS
#       linker:         $LD (gnu? $with_gnu_ld)
#       $progname:              (GNU libtool 1.2435 2007/03/18 18:44:42) 2.1a
#       automake:               $automake_version
#       autoconf:               $autoconf_version
#
# Report bugs to <bug-libtool@gnu.org>.
 
PROGRAM=ltmain.sh
PACKAGE=libtool
VERSION=2.1a
TIMESTAMP=" 1.2435 2007/03/18 18:44:42"
package_revision=1.2435
 
# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
  emulate sh
  NULLCMD=:
  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
  # is contrary to our usage.  Disable this feature.
  alias -g '${1+"$@"}'='"$@"'
  setopt NO_GLOB_SUBST
else
  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
fi
BIN_SH=xpg4; export BIN_SH # for Tru64
DUALCASE=1; export DUALCASE # for MKS sh
 
# NLS nuisances: We save the old values to restore during execute mode.
# Only set LANG and LC_ALL to C if already set.
# These must not be set unconditionally because not all systems understand
# e.g. LANG=C (notably SCO).
for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
do
  eval "if test \"\${$lt_var+set}\" = set; then
          save_$lt_var=\$$lt_var
          $lt_var=C
          export $lt_var
        fi"
done
 
$lt_unset CDPATH
 
 
 
 
 
: ${CP="cp -f"}
: ${ECHO="echo"}
: ${EGREP="/bin/grep -E"}
: ${FGREP="/bin/grep -F"}
: ${GREP="/bin/grep"}
: ${LN_S="ln -s"}
: ${MAKE="make"}
: ${MKDIR="mkdir"}
: ${MV="mv -f"}
: ${RM="rm -f"}
: ${SED="/bin/sed"}
: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
: ${Xsed="$SED -e 1s/^X//"}
 
# Global variables:
EXIT_SUCCESS=0
EXIT_FAILURE=1
EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
EXIT_SKIP=77      # $? = 77 is used to indicate a skipped test to automake.
 
exit_status=$EXIT_SUCCESS
 
# Make sure IFS has a sensible default
lt_nl='
'
IFS="   $lt_nl"
 
dirname="s,/[^/]*$,,"
basename="s,^.*/,,"
 
# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
# is ksh but when the shell is invoked as "sh" and the current value of
# the _XPG environment variable is not equal to 1 (one), the special
# positional parameter $0, within a function call, is the name of the
# function.
progpath="$0"
 
# The name of this program:
# In the unlikely event $progname began with a '-', it would play havoc with
# func_echo (imagine progname=-n), so we prepend ./ in that case:
progname=`$ECHO "X$progpath" | $Xsed -e "$basename" -e 's,^-,./-,'`
 
# Make sure we have an absolute path for reexecution:
case $progpath in
  [\\/]*|[A-Za-z]:\\*) ;;
  *[\\/]*)
     progdir=`$ECHO "X$progpath" | $Xsed -e "$dirname"`
     progdir=`cd "$progdir" && pwd`
     progpath="$progdir/$progname"
     ;;
  *)
     save_IFS="$IFS"
     IFS=:
     for progdir in $PATH; do
       IFS="$save_IFS"
       test -x "$progdir/$progname" && break
     done
     IFS="$save_IFS"
     test -n "$progdir" || progdir=`pwd`
     progpath="$progdir/$progname"
     ;;
esac
 
# Sed substitution that helps us do robust quoting.  It backslashifies
# metacharacters that are still active within double-quoted strings.
Xsed="${SED}"' -e 1s/^X//'
sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
 
# Same as above, but do not quote variable references.
double_quote_subst='s/\(["`\\]\)/\\\1/g'
 
# Re-`\' parameter expansions in output of double_quote_subst that were
# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
# in input to double_quote_subst, that '$' was protected from expansion.
# Since each input `\' is now two `\'s, look for any number of runs of
# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
bs='\\'
bs2='\\\\'
bs4='\\\\\\\\'
dollar='\$'
sed_double_backslash="\
  s/$bs4/&\\
/g
  s/^$bs2$dollar/$bs&/
  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
  s/\n//g"
 
# Standard options:
opt_dry_run=false
opt_help=false
opt_quiet=false
opt_verbose=false
 
# func_echo arg...
# Echo program name prefixed message, along with the current mode
# name if it has been set yet.
func_echo ()
{
    $ECHO "$progname${mode+: }$mode: "${1+"$@"}
}
 
# func_verbose arg...
# Echo program name prefixed message in verbose mode only.
func_verbose ()
{
    $opt_verbose && func_echo ${1+"$@"}
 
    # A bug in bash halts the script if the last line of a function
    # fails when set -e is in force, so we need another command to
    # work around that:
    :
}
 
# func_error arg...
# Echo program name prefixed message to standard error.
func_error ()
{
    $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
}
 
# func_warning arg...
# Echo program name prefixed warning message to standard error.
func_warning ()
{
    $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
}
 
# func_fatal_error arg...
# Echo program name prefixed message to standard error, and exit.
func_fatal_error ()
{
    func_error ${1+"$@"}
    exit $EXIT_FAILURE
}
 
# func_fatal_help arg...
# Echo program name prefixed message to standard error, followed by
# a help hint, and exit.
func_fatal_help ()
{
    func_error ${1+"$@"}
    func_fatal_error "$help"
}
help="Try \`$progname --help' for more information."  ## default
 
 
# func_grep expression filename
# Check whether EXPRESSION matches any line of FILENAME, without output.
func_grep ()
{
    $GREP "$1" "$2" >/dev/null 2>&1
}
 
 
# func_mkdir_p directory-path
# Make sure the entire path to DIRECTORY-PATH is available.
func_mkdir_p ()
{
    my_directory_path="$1"
    my_dir_list=
 
    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
 
      # Protect directory names starting with `-'
      case $my_directory_path in
        -*) my_directory_path="./$my_directory_path" ;;
      esac
 
      # While some portion of DIR does not yet exist...
      while test ! -d "$my_directory_path"; do
        # ...make a list in topmost first order.  Use a colon delimited
        # list incase some portion of path contains whitespace.
        my_dir_list="$my_directory_path:$my_dir_list"
 
        # If the last portion added has no slash in it, the list is done
        case $my_directory_path in */*) ;; *) break ;; esac
 
        # ...otherwise throw away the child directory and loop
        my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
      done
      my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
 
      save_mkdir_p_IFS="$IFS"; IFS=':'
      for my_dir in $my_dir_list; do
        IFS="$save_mkdir_p_IFS"
        # mkdir can fail with a `File exist' error if two processes
        # try to create one of the directories concurrently.  Don't
        # stop in that case!
        $MKDIR "$my_dir" 2>/dev/null || :
      done
      IFS="$save_mkdir_p_IFS"
 
      # Bail out if we (or some other process) failed to create a directory.
      test -d "$my_directory_path" || \
        func_fatal_error "Failed to create \`$1'"
    fi
}
 
 
# func_mktempdir [string]
# Make a temporary directory that won't clash with other running
# libtool processes, and avoids race conditions if possible.  If
# given, STRING is the basename for that directory.
func_mktempdir ()
{
    my_template="${TMPDIR-/tmp}/${1-$progname}"
 
    if test "$opt_dry_run" = ":"; then
      # Return a directory name, but don't create it in dry-run mode
      my_tmpdir="${my_template}-$$"
    else
 
      # If mktemp works, use that first and foremost
      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
 
      if test ! -d "$my_tmpdir"; then
        # Failing that, at least try and use $RANDOM to avoid a race
        my_tmpdir="${my_template}-${RANDOM-0}$$"
 
        save_mktempdir_umask=`umask`
        umask 0077
        $MKDIR "$my_tmpdir"
        umask $save_mktempdir_umask
      fi
 
      # If we're not in dry-run mode, bomb out on failure
      test -d "$my_tmpdir" || \
        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
    fi
 
    $ECHO "X$my_tmpdir" | $Xsed
}
 
 
# func_quote_for_eval arg
# Aesthetically quote ARG to be evaled later.
# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
# is double-quoted, suitable for a subsequent eval, whereas
# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
# which are still active within double quotes backslashified.
func_quote_for_eval ()
{
    case $1 in
      *[\\\`\"\$]*)
        func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
      *)
        func_quote_for_eval_unquoted_result="$1" ;;
    esac
 
    case $func_quote_for_eval_unquoted_result in
      # Double-quote args containing shell metacharacters to delay
      # word splitting, command substitution and and variable
      # expansion for a subsequent eval.
      # Many Bourne shells cannot handle close brackets correctly
      # in scan sets, so we specify it separately.
      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")
        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
        ;;
      *)
        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
    esac
}
 
 
# func_quote_for_expand arg
# Aesthetically quote ARG to be evaled later; same as above,
# but do not quote variable references.
func_quote_for_expand ()
{
    case $1 in
      *[\\\`\"]*)
        my_arg=`$ECHO "X$1" | $Xsed \
            -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
      *)
        my_arg="$1" ;;
    esac
 
    case $my_arg in
      # Double-quote args containing shell metacharacters to delay
      # word splitting and command substitution for a subsequent eval.
      # Many Bourne shells cannot handle close brackets correctly
      # in scan sets, so we specify it separately.
      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")
        my_arg="\"$my_arg\""
        ;;
    esac
 
    func_quote_for_expand_result="$my_arg"
}
 
 
# func_show_eval cmd [fail_exp]
# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
# is given, then evaluate it.
func_show_eval ()
{
    my_cmd="$1"
    my_fail_exp="${2-:}"
 
    ${opt_silent-false} || {
      func_quote_for_expand "$my_cmd"
      eval "func_echo $func_quote_for_expand_result"
    }
 
    if ${opt_dry_run-false}; then :; else
      eval "$my_cmd"
      my_status=$?
      if test "$my_status" -eq 0; then :; else
        eval "(exit $my_status); $my_fail_exp"
      fi
    fi
}
 
 
 
 
 
# func_version
# Echo version message to standard output and exit.
func_version ()
{
    $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
        s/^# //
        s/^# *$//
        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
        p
     }' < "$progpath"
     exit $?
}
 
# func_usage
# Echo short help message to standard output and exit.
func_usage ()
{
    $SED -n '/^# Usage:/,/# -h/ {
        s/^# //
        s/^# *$//
        s/\$progname/'$progname'/
        p
    }' < "$progpath"
    $ECHO
    $ECHO "run \`$progname --help | more' for full usage"
    exit $?
}
 
# func_help
# Echo long help message to standard output and exit.
func_help ()
{
    $SED -n '/^# Usage:/,/# Report bugs to/ {
        s/^# //
        s/^# *$//
        s*\$progname*'$progname'*
        s*\$host*'"$host"'*
        s*\$SHELL*'"$SHELL"'*
        s*\$LTCC*'"$LTCC"'*
        s*\$LTCFLAGS*'"$LTCFLAGS"'*
        s*\$LD*'"$LD"'*
        s/\$with_gnu_ld/'"$with_gnu_ld"'/
        s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
        s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
        p
     }' < "$progpath"
    exit $?
}
 
# func_missing_arg argname
# Echo program name prefixed message to standard error and set global
# exit_cmd.
func_missing_arg ()
{
    func_error "missing argument for $1"
    exit_cmd=exit
}
 
exit_cmd=:
 
 
 
 
 
# Check that we have a working $ECHO.
if test "X$1" = X--no-reexec; then
  # Discard the --no-reexec flag, and continue.
  shift
elif test "X$1" = X--fallback-echo; then
  # Avoid inline document here, it may be left over
  :
elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
  # Yippee, $ECHO works!
  :
else
  # Restart under the correct shell, and then maybe $ECHO will work.
  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
fi
 
if test "X$1" = X--fallback-echo; then
  # used as fallback echo
  shift
  cat <<EOF
$*
EOF
  exit $EXIT_SUCCESS
fi
 
magic="%%%MAGIC variable%%%"
 
 
# Global variables.
# $mode is unset
nonopt=
execute_dlfiles=
preserve_args=
lo2o="s/\\.lo\$/.${objext}/"
o2lo="s/\\.${objext}\$/.lo/"
extracted_archives=
extracted_serial=0
 
opt_dry_run=false
opt_duplicate_deps=false
opt_silent=false
opt_debug=:
 
# If this variable is set in any of the actions, the command in it
# will be execed at the end.  This prevents here-documents from being
# left over by shells.
exec_cmd=
 
# func_fatal_configuration arg...
# Echo program name prefixed message to standard error, followed by
# a configuration failure hint, and exit.
func_fatal_configuration ()
{
    func_error ${1+"$@"}
    func_error "See the $PACKAGE documentation for more information."
    func_fatal_error "Fatal configuration error."
}
 
 
# func_config
# Display the configuration for all the tags in this script.
func_config ()
{
    re_begincf='^# ### BEGIN LIBTOOL'
    re_endcf='^# ### END LIBTOOL'
 
    # Default configuration.
    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
 
    # Now print the configurations for the tags.
    for tagname in $taglist; do
      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
    done
 
    exit $?
}
 
# func_features
# Display the features supported by this script.
func_features ()
{
    $ECHO "host: $host"
    if test "$build_libtool_libs" = yes; then
      $ECHO "enable shared libraries"
    else
      $ECHO "disable shared libraries"
    fi
    if test "$build_old_libs" = yes; then
      $ECHO "enable static libraries"
    else
      $ECHO "disable static libraries"
    fi
 
    exit $?
}
 
# func_enable_tag tagname
# Verify that TAGNAME is valid, and either flag an error and exit, or
# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
# variable here.
func_enable_tag ()
{
  # Global variable:
  tagname="$1"
 
  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
  sed_extractcf="/$re_begincf/,/$re_endcf/p"
 
  # Validate tagname.
  case $tagname in
    *[!-_A-Za-z0-9,/]*)
      func_fatal_error "invalid tag name: $tagname"
      ;;
  esac
 
  # Don't test for the "default" C tag, as we know it's
  # there but not specially marked.
  case $tagname in
    CC) ;;
    *)
      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
        taglist="$taglist $tagname"
 
        # Evaluate the configuration.  Be careful to quote the path
        # and the sed script, to avoid splitting on whitespace, but
        # also don't use non-portable quotes within backquotes within
        # quotes we have to do it in 2 steps:
        extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
        eval "$extractedcf"
      else
        func_error "ignoring unknown tag $tagname"
      fi
      ;;
  esac
}
 
 
func_mode_help ()
{
    # We need to display help for each of the modes.
    case $mode in
      "")
        # Generic help is extracted from the usage comments
        # at the start of this file.
        func_help
        ;;
 
      clean)
        $ECHO \
"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
 
Remove files from the build directory.
 
RM is the name of the program to use to delete files associated with each FILE
(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
to RM.
 
If FILE is a libtool library, object or program, all the files associated
with it are deleted. Otherwise, only FILE itself is deleted using RM."
        ;;
 
      compile)
      $ECHO \
"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
 
Compile a source file into a libtool library object.
 
This mode accepts the following additional options:
 
  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
  -no-suppress      do not suppress compiler output for multiple passes
  -prefer-pic       try to building PIC objects only
  -prefer-non-pic   try to building non-PIC objects only
  -shared           do not build a \`.o' file suitable for static linking
  -static           only build a \`.o' file suitable for static linking
 
COMPILE-COMMAND is a command to be used in creating a \`standard' object file
from the given SOURCEFILE.
 
The output file name is determined by removing the directory component from
SOURCEFILE, then substituting the C source code suffix \`.c' with the
library object suffix, \`.lo'."
        ;;
 
      execute)
        $ECHO \
"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
 
Automatically set library path, then run a program.
 
This mode accepts the following additional options:
 
  -dlopen FILE      add the directory containing FILE to the library path
 
This mode sets the library path environment variable according to \`-dlopen'
flags.
 
If any of the ARGS are libtool executable wrappers, then they are translated
into their corresponding uninstalled binary, and any of their required library
directories are added to the library path.
 
Then, COMMAND is executed, with ARGS as arguments."
        ;;
 
      finish)
        $ECHO \
"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
 
Complete the installation of libtool libraries.
 
Each LIBDIR is a directory that contains libtool libraries.
 
The commands that this mode executes may require superuser privileges.  Use
the \`--dry-run' option if you just want to see what would be executed."
        ;;
 
      install)
        $ECHO \
"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
 
Install executables or libraries.
 
INSTALL-COMMAND is the installation command.  The first component should be
either the \`install' or \`cp' program.
 
The following components of INSTALL-COMMAND are treated specially:
 
  -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
 
The rest of the components are interpreted as arguments to that command (only
BSD-compatible install options are recognized)."
        ;;
 
      link)
        $ECHO \
"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
 
Link object files or libraries together to form another library, or to
create an executable program.
 
LINK-COMMAND is a command using the C compiler that you would use to create
a program from several object files.
 
The following components of LINK-COMMAND are treated specially:
 
  -all-static       do not do any dynamic linking at all
  -avoid-version    do not add a version suffix if possible
  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
  -export-symbols SYMFILE
                    try to export only the symbols listed in SYMFILE
  -export-symbols-regex REGEX
                    try to export only the symbols matching REGEX
  -LLIBDIR          search LIBDIR for required installed libraries
  -lNAME            OUTPUT-FILE requires the installed library libNAME
  -module           build a library that can dlopened
  -no-fast-install  disable the fast-install mode
  -no-install       link a not-installable executable
  -no-undefined     declare that a library does not refer to external symbols
  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
  -objectlist FILE  Use a list of object files found in FILE to specify objects
  -precious-files-regex REGEX
                    don't remove output files matching REGEX
  -release RELEASE  specify package release information
  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
  -shared           only do dynamic linking of libtool libraries
  -shrext SUFFIX    override the standard shared library file extension
  -static           do not do any dynamic linking of uninstalled libtool libraries
  -static-libtool-libs
                    do not do any dynamic linking of libtool libraries
  -version-info CURRENT[:REVISION[:AGE]]
                    specify library version info [each variable defaults to 0]
  -weak LIBNAME     declare that the target provides the LIBNAME interface
 
All other options (arguments beginning with \`-') are ignored.
 
Every other argument is treated as a filename.  Files ending in \`.la' are
treated as uninstalled libtool libraries, other files are standard or library
object files.
 
If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
only library objects (\`.lo' files) may be specified, and \`-rpath' is
required, except when creating a convenience library.
 
If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
using \`ar' and \`ranlib', or on Windows using \`lib'.
 
If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
is created, otherwise an executable program is created."
        ;;
 
      uninstall)
        $ECHO \
"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
 
Remove libraries from an installation directory.
 
RM is the name of the program to use to delete files associated with each FILE
(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
to RM.
 
If FILE is a libtool library, all the files associated with it are deleted.
Otherwise, only FILE itself is deleted using RM."
        ;;
 
      *)
        func_fatal_help "invalid operation mode \`$mode'"
        ;;
    esac
 
    $ECHO
    $ECHO "Try \`$progname --help' for more information about other modes."
 
    exit $?
}
 
# Generated shell functions inserted here.
 
 
# Parse options once, thoroughly.  This comes as soon as possible in
# the script to make things like `libtool --version' happen quickly.
{
 
  # Shorthand for --mode=foo, only valid as the first argument
  case $1 in
  clean|clea|cle|cl)
    shift; set dummy --mode clean ${1+"$@"}; shift
    ;;
  compile|compil|compi|comp|com|co|c)
    shift; set dummy --mode compile ${1+"$@"}; shift
    ;;
  execute|execut|execu|exec|exe|ex|e)
    shift; set dummy --mode execute ${1+"$@"}; shift
    ;;
  finish|finis|fini|fin|fi|f)
    shift; set dummy --mode finish ${1+"$@"}; shift
    ;;
  install|instal|insta|inst|ins|in|i)
    shift; set dummy --mode install ${1+"$@"}; shift
    ;;
  link|lin|li|l)
    shift; set dummy --mode link ${1+"$@"}; shift
    ;;
  uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
    shift; set dummy --mode uninstall ${1+"$@"}; shift
    ;;
  esac
 
  # Parse non-mode specific arguments:
  while test "$#" -gt 0; do
    opt="$1"
    shift
 
    case $opt in
      --config)         func_config                                     ;;
 
      --debug)          preserve_args="$preserve_args $opt"
                        func_echo "enabling shell trace mode"
                        opt_debug='set -x'
                        $opt_debug
                        ;;
 
      -dlopen)          test "$#" -eq 0 && func_missing_arg "$opt" && break
                        execute_dlfiles="$execute_dlfiles $1"
                        shift
                        ;;
 
      --dry-run | -n)   opt_dry_run=:                                   ;;
      --features)       func_features                                   ;;
      --finish)         mode="finish"                                   ;;
 
      --mode)           test "$#" -eq 0 && func_missing_arg "$opt" && break
                        case $1 in
                          # Valid mode arguments:
                          clean)        ;;
                          compile)      ;;
                          execute)      ;;
                          finish)       ;;
                          install)      ;;
                          link)         ;;
                          relink)       ;;
                          uninstall)    ;;
 
                          # Catch anything else as an error
                          *) func_error "invalid argument for $opt"
                             exit_cmd=exit
                             break
                             ;;
                        esac
 
                        mode="$1"
                        shift
                        ;;
 
      --preserve-dup-deps)
                        opt_duplicate_deps=:                            ;;
 
      --quiet|--silent) preserve_args="$preserve_args $opt"
                        opt_silent=:
                        ;;
 
      --verbose| -v)    preserve_args="$preserve_args $opt"
                        opt_silent=false
                        ;;
 
      --tag)            test "$#" -eq 0 && func_missing_arg "$opt" && break
                        preserve_args="$preserve_args $opt $1"
                        func_enable_tag "$1"    # tagname is set here
                        shift
                        ;;
 
      # Separate optargs to long options:
      -dlopen=*|--mode=*|--tag=*)
                        func_opt_split "$opt"
                        set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
                        shift
                        ;;
 
      -\?|-h)           func_usage                                      ;;
      --help)           opt_help=:                                      ;;
      --version)        func_version                                    ;;
 
      -*)               func_fatal_help "unrecognized option \`$opt'"   ;;
 
      *)                nonopt="$opt"
                        break
                        ;;
    esac
  done
 
  # Now that we've collected a possible --mode arg, show help if necessary
  $opt_help && func_mode_help
 
  case $host in
    *cygwin* | *mingw* | *pw32*)
      # don't eliminate duplications in $postdeps and $predeps
      opt_duplicate_compiler_generated_deps=:
      ;;
    *)
      opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
      ;;
  esac
 
  # Having warned about all mis-specified options, bail out if
  # anything was wrong.
  $exit_cmd $EXIT_FAILURE
}
 
# func_check_version_match
# Ensure that we are using m4 macros, and libtool script from the same
# release of libtool.
func_check_version_match ()
{
  if test "$package_revision" != "$macro_revision"; then
    if test "$VERSION" != "$macro_version"; then
      if test -z "$macro_version"; then
        cat >&2 <<_LT_EOF
$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
$progname: definition of this LT_INIT comes from an older release.
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
$progname: and run autoconf again.
_LT_EOF
      else
        cat >&2 <<_LT_EOF
$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
$progname: and run autoconf again.
_LT_EOF
      fi
    else
      cat >&2 <<_LT_EOF
$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
$progname: but the definition of this LT_INIT comes from revision $macro_revision.
$progname: You should recreate aclocal.m4 with macros from revision $package_revision
$progname: of $PACKAGE $VERSION and run autoconf again.
_LT_EOF
    fi
 
    exit $EXIT_MISMATCH
  fi
}
 
 
## ----------- ##
##    Main.    ##
## ----------- ##
 
{
  # Sanity checks first:
  func_check_version_match
 
  if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
    func_fatal_configuration "not configured to build any kind of library"
  fi
 
  test -z "$mode" && func_fatal_error "error: you must specify a MODE."
 
 
  # Darwin sucks
  eval std_shrext=\"$shrext_cmds\"
 
 
  # Only execute mode is allowed to have -dlopen flags.
  if test -n "$execute_dlfiles" && test "$mode" != execute; then
    func_error "unrecognized option \`-dlopen'"
    $ECHO "$help" 1>&2
    exit $EXIT_FAILURE
  fi
 
  # Change the help message to a mode-specific one.
  generic_help="$help"
  help="Try \`$progname --help --mode=$mode' for more information."
}
 
 
# func_lalib_p file
# True iff FILE is a libtool `.la' library or `.lo' object file.
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_lalib_p ()
{
    $SED -e 4q "$1" 2>/dev/null \
      | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
}
 
# func_lalib_unsafe_p file
# True iff FILE is a libtool `.la' library or `.lo' object file.
# This function implements the same check as func_lalib_p without
# resorting to external programs.  To this end, it redirects stdin and
# closes it afterwards, without saving the original file descriptor.
# As a safety measure, use it only where a negative result would be
# fatal anyway.  Works if `file' does not exist.
func_lalib_unsafe_p ()
{
    lalib_p=no
    if test -r "$1" && exec 5<&1 <"$1"; then
        for lalib_p_l in 1 2 3 4
        do
            read lalib_p_line
            case "$lalib_p_line" in
                \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
            esac
        done
        exec 1<&5 5<&-
    fi
    test "$lalib_p" = yes
}
 
# func_ltwrapper_p file
# True iff FILE is a libtool wrapper script.
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_ltwrapper_p ()
{
    func_lalib_p "$1"
}
 
 
# func_execute_cmds commands fail_cmd
# Execute tilde-delimited COMMANDS.
# If FAIL_CMD is given, eval that upon failure.
# FAIL_CMD may read-access the current command in variable CMD!
func_execute_cmds ()
{
    $opt_debug
    save_ifs=$IFS; IFS='~'
    for cmd in $1; do
      IFS=$save_ifs
      eval cmd=\"$cmd\"
      func_show_eval "$cmd" "${2-:}"
    done
    IFS=$save_ifs
}
 
 
# func_source file
# Source FILE, adding directory component if necessary.
# Note that it is not necessary on cygwin/mingw to append a dot to
# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
# behavior happens only for exec(3), not for open(2)!  Also, sourcing
# `FILE.' does not work on cygwin managed mounts.
func_source ()
{
    $opt_debug
    case $1 in
    */* | *\\*) . "$1" ;;
    *)          . "./$1" ;;
    esac
}
 
 
# func_win32_libid arg
# return the library type of file 'arg'
#
# Need a lot of goo to handle *both* DLLs and import libs
# Has to be a shell function in order to 'eat' the argument
# that is supplied when $file_magic_command is called.
func_win32_libid ()
{
  $opt_debug
  win32_libid_type="unknown"
  win32_fileres=`file -L $1 2>/dev/null`
  case $win32_fileres in
  *ar\ archive\ import\ library*) # definitely import
    win32_libid_type="x86 archive import"
    ;;
  *ar\ archive*) # could be an import, or static
    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
       $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
      win32_nmres=`eval $NM -f posix -A $1 |
        $SED -n -e '
            1,100{
                / I /{
                    s,.*,import,
                    p
                    q
                }
            }'`
      case $win32_nmres in
      import*)  win32_libid_type="x86 archive import";;
      *)        win32_libid_type="x86 archive static";;
      esac
    fi
    ;;
  *DLL*)
    win32_libid_type="x86 DLL"
    ;;
  *executable*) # but shell scripts are "executable" too...
    case $win32_fileres in
    *MS\ Windows\ PE\ Intel*)
      win32_libid_type="x86 DLL"
      ;;
    esac
    ;;
  esac
  $ECHO "$win32_libid_type"
}
 
 
 
# func_infer_tag arg
# Infer tagged configuration to use if any are available and
# if one wasn't chosen via the "--tag" command line option.
# Only attempt this if the compiler in the base compile
# command doesn't match the default compiler.
# arg is usually of the form 'gcc ...'
func_infer_tag ()
{
    $opt_debug
    if test -n "$available_tags" && test -z "$tagname"; then
      CC_quoted=
      for arg in $CC; do
        func_quote_for_eval "$arg"
        CC_quoted="$CC_quoted $func_quote_for_eval_result"
      done
      case $@ in
      # Blanks in the command may have been stripped by the calling shell,
      # but not from the CC environment variable when configure was run.
      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
      # Blanks at the start of $base_compile will cause this to fail
      # if we don't check for them as well.
      *)
        for z in $available_tags; do
          if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
            # Evaluate the configuration.
            eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
            CC_quoted=
            for arg in $CC; do
              # Double-quote args containing other shell metacharacters.
              func_quote_for_eval "$arg"
              CC_quoted="$CC_quoted $func_quote_for_eval_result"
            done
            case "$@ " in
              " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
              # The compiler in the base compile command matches
              # the one in the tagged configuration.
              # Assume this is the tagged configuration we want.
              tagname=$z
              break
              ;;
            esac
          fi
        done
        # If $tagname still isn't set, then no tagged configuration
        # was found and let the user know that the "--tag" command
        # line option must be used.
        if test -z "$tagname"; then
          func_echo "unable to infer tagged configuration"
          func_fatal_error "specify a tag with \`--tag'"
#       else
#         func_verbose "using $tagname tagged configuration"
        fi
        ;;
      esac
    fi
}
 
 
 
# func_generate_dlsyms outputname originator pic_p
# Extract symbols from dlprefiles and create ${outputname}S.o with
# a dlpreopen symbol table.
func_generate_dlsyms ()
{
    $opt_debug
    my_outputname="$1"
    my_originator="$2"
    my_pic_p="${3-no}"
    my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
    my_dlsyms=
 
    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
      if test -n "$NM" && test -n "$global_symbol_pipe"; then
        my_dlsyms="${my_outputname}S.c"
      else
        func_error "not configured to extract global symbols from dlpreopened files"
      fi
    fi
 
    if test -n "$my_dlsyms"; then
      case $my_dlsyms in
      "") ;;
      *.c)
        # Discover the nlist of each of the dlfiles.
        nlist="$output_objdir/${my_outputname}.nm"
 
        func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
 
        # Parse the name list into a source file.
        func_echo "creating $output_objdir/$my_dlsyms"
 
        $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
 
#ifdef __cplusplus
extern \"C\" {
#endif
 
/* External symbol declarations for the compiler. */\
"
 
        if test "$dlself" = yes; then
          func_echo "generating symbol list for \`$output'"
 
          $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
 
          # Add our own program objects to the symbol list.
          progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
          for progfile in $progfiles; do
            func_echo "extracting global C symbols from \`$progfile'"
            $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
          done
 
          if test -n "$exclude_expsyms"; then
            $opt_dry_run || {
              eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
              eval '$MV "$nlist"T "$nlist"'
            }
          fi
 
          if test -n "$export_symbols_regex"; then
            $opt_dry_run || {
              eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
              eval '$MV "$nlist"T "$nlist"'
            }
          fi
 
          # Prepare the list of exported symbols
          if test -z "$export_symbols"; then
            export_symbols="$output_objdir/$outputname.exp"
            $opt_dry_run || {
              $RM $export_symbols
              eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
              case $host in
              *cygwin* | *mingw* )
                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
                ;;
              esac
            }
          else
            $opt_dry_run || {
              eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
              eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
              eval '$MV "$nlist"T "$nlist"'
              case $host in
                *cygwin | *mingw* )
                  eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
                  eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
                  ;;
              esac
            }
          fi
        fi
 
        for dlprefile in $dlprefiles; do
          func_echo "extracting global C symbols from \`$dlprefile'"
          func_basename "$dlprefile"
          name="$func_basename_result"
          $opt_dry_run || {
            eval '$ECHO ": $name " >> "$nlist"'
            eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
          }
        done
 
        $opt_dry_run || {
          # Make sure we have at least an empty file.
          test -f "$nlist" || : > "$nlist"
 
          if test -n "$exclude_expsyms"; then
            $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
            $MV "$nlist"T "$nlist"
          fi
 
          # Try sorting and uniquifying the output.
          if $GREP -v "^: " < "$nlist" |
              if sort -k 3 </dev/null >/dev/null 2>&1; then
                sort -k 3
              else
                sort +2
              fi |
              uniq > "$nlist"S; then
            :
          else
            $GREP -v "^: " < "$nlist" > "$nlist"S
          fi
 
          if test -f "$nlist"S; then
            eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
          else
            $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
          fi
 
          $ECHO >> "$output_objdir/$my_dlsyms" "\
 
/* The mapping between symbol names and symbols.  */
typedef struct {
  const char *name;
  void *address;
} lt_dlsymlist;
"
          case $host in
          *cygwin* | *mingw* )
            $ECHO >> "$output_objdir/$my_dlsyms" "\
/* DATA imports from DLLs on WIN32 con't be const, because
   runtime relocations are performed -- see ld's documentation
   on pseudo-relocs.  */"
            lt_dlsym_const= ;;
          *osf5*)
            echo >> "$output_objdir/$my_dlsyms" "\
/* This system does not cope well with relocations in const data */"
            lt_dlsym_const= ;;
          *)
            lt_dlsym_const=const ;;
          esac
 
          $ECHO >> "$output_objdir/$my_dlsyms" "\
extern $lt_dlsym_const lt_dlsymlist
lt_${my_prefix}_LTX_preloaded_symbols[];
$lt_dlsym_const lt_dlsymlist
lt_${my_prefix}_LTX_preloaded_symbols[] =
{\
  { \"$my_originator\", (void *) 0 },"
 
          eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
 
          $ECHO >> "$output_objdir/$my_dlsyms" "\
  {0, (void *) 0}
};
 
/* This works around a problem in FreeBSD linker */
#ifdef FREEBSD_WORKAROUND
static const void *lt_preloaded_setup() {
  return lt_${my_prefix}_LTX_preloaded_symbols;
}
#endif
 
#ifdef __cplusplus
}
#endif\
"
        } # !$opt_dry_run
 
        pic_flag_for_symtable=
        case "$compile_command " in
        *" -static "*) ;;
        *)
          case $host in
          # compiling the symbol table file with pic_flag works around
          # a FreeBSD bug that causes programs to crash when -lm is
          # linked before any other PIC object.  But we must not use
          # pic_flag when linking with -static.  The problem exists in
          # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
          *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
            pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
          *-*-hpux*)
            pic_flag_for_symtable=" $pic_flag"  ;;
          *)
            if test "X$my_pic_p" != Xno; then
              pic_flag_for_symtable=" $pic_flag"
            fi
            ;;
          esac
          ;;
        esac
        symtab_cflags=
        for arg in $LTCFLAGS; do
          case $arg in
          -pie | -fpie | -fPIE) ;;
          *) symtab_cflags="$symtab_cflags $arg" ;;
          esac
        done
 
        # Now compile the dynamic symbol file.
        func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
 
        # Clean up the generated files.
        func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
 
        # Transform the symbol file into the correct name.
        symfileobj="$output_objdir/${my_outputname}S.$objext"
        case $host in
        *cygwin* | *mingw* )
          if test -f "$output_objdir/$my_outputname.def"; then
            compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
            finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
          else
            compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
            finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
          fi
          ;;
        *)
          compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
          finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
          ;;
        esac
        ;;
      *)
        func_fatal_error "unknown suffix for \`$my_dlsyms'"
        ;;
      esac
    else
      # We keep going just in case the user didn't refer to
      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
      # really was required.
 
      # Nullify the symbol file.
      compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
      finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
    fi
}
 
# func_extract_an_archive dir oldlib
func_extract_an_archive ()
{
    $opt_debug
    f_ex_an_ar_dir="$1"; shift
    f_ex_an_ar_oldlib="$1"
    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" 'exit $?'
    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
     :
    else
      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
    fi
}
 
 
# func_extract_archives gentop oldlib ...
func_extract_archives ()
{
    $opt_debug
    my_gentop="$1"; shift
    my_oldlibs=${1+"$@"}
    my_oldobjs=""
    my_xlib=""
    my_xabs=""
    my_xdir=""
 
    for my_xlib in $my_oldlibs; do
      # Extract the objects.
      case $my_xlib in
        [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
        *) my_xabs=`pwd`"/$my_xlib" ;;
      esac
      func_basename "$my_xlib"
      my_xlib="$func_basename_result"
      my_xlib_u=$my_xlib
      while :; do
        case " $extracted_archives " in
        *" $my_xlib_u "*)
          extracted_serial=`expr $extracted_serial + 1`
          my_xlib_u=lt$extracted_serial-$my_xlib ;;
        *) break ;;
        esac
      done
      extracted_archives="$extracted_archives $my_xlib_u"
      my_xdir="$my_gentop/$my_xlib_u"
 
      func_mkdir_p "$my_xdir"
 
      case $host in
      *-darwin*)
        func_echo "Extracting $my_xabs"
        # Do not bother doing anything if just a dry run
        $opt_dry_run || {
          darwin_orig_dir=`pwd`
          cd $my_xdir || exit $?
          darwin_archive=$my_xabs
          darwin_curdir=`pwd`
          darwin_base_archive=`basename $darwin_archive`
          darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
          if test -n "$darwin_arches"; then
            darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
            darwin_arch=
            func_echo "$darwin_base_archive has multiple architectures $darwin_arches"
            for darwin_arch in  $darwin_arches ; do
              func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
              lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
              cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
              func_extract_an_archive "`pwd`" "${darwin_base_archive}"
              cd "$darwin_curdir"
              $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
            done # $darwin_arches
            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
            darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
            darwin_file=
            darwin_files=
            for darwin_file in $darwin_filelist; do
              darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
              lipo -create -output "$darwin_file" $darwin_files
            done # $darwin_filelist
            $RM -rf unfat-$$
            cd "$darwin_orig_dir"
          else
            cd $darwin_orig_dir
            func_extract_an_archive "$my_xdir" "$my_xabs"
          fi # $darwin_arches
        } # !$opt_dry_run
        ;;
      *)
        func_extract_an_archive "$my_xdir" "$my_xabs"
        ;;
      esac
      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
    done
 
    func_extract_archives_result="$my_oldobjs"
}
 
 
 
# func_write_libtool_object output_name pic_name nonpic_name
# Create a libtool object file (analogous to a ".la" file),
# but don't create it if we're doing a dry run.
func_write_libtool_object ()
{
    write_libobj=${1}
    if test "$build_libtool_libs" = yes; then
      write_lobj=\'${2}\'
    else
      write_lobj=none
    fi
 
    if test "$build_old_libs" = yes; then
      write_oldobj=\'${3}\'
    else
      write_oldobj=none
    fi
 
    $opt_dry_run || {
      cat >${write_libobj}T <<EOF
# $write_libobj - a libtool object file
# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
 
# Name of the PIC object.
pic_object=$write_lobj
 
# Name of the non-PIC object
non_pic_object=$write_oldobj
 
EOF
      mv -f "${write_libobj}T" "${write_libobj}"
    }
}
 
# func_mode_compile arg...
func_mode_compile ()
{
    $opt_debug
    # Get the compilation command and the source file.
    base_compile=
    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
    suppress_opt=yes
    suppress_output=
    arg_mode=normal
    libobj=
    later=
    pie_flag=
 
    for arg
    do
      case $arg_mode in
      arg  )
        # do not "continue".  Instead, add this to base_compile
        lastarg="$arg"
        arg_mode=normal
        ;;
 
      target )
        libobj="$arg"
        arg_mode=normal
        continue
        ;;
 
      normal )
        # Accept any command-line options.
        case $arg in
        -o)
          test -n "$libobj" && \
            func_fatal_error "you cannot specify \`-o' more than once"
          arg_mode=target
          continue
          ;;
 
        -pie | -fpie | -fPIE)
          pie_flag="$pie_flag $arg"
          continue
          ;;
 
        -shared | -static | -prefer-pic | -prefer-non-pic)
          later="$later $arg"
          continue
          ;;
 
        -no-suppress)
          suppress_opt=no
          continue
          ;;
 
        -Xcompiler)
          arg_mode=arg  #  the next one goes into the "base_compile" arg list
          continue      #  The current "srcfile" will either be retained or
          ;;            #  replaced later.  I would guess that would be a bug.
 
        -Wc,*)
          func_stripname '-Wc,' '' "$arg"
          args=$func_stripname_result
          lastarg=
          save_ifs="$IFS"; IFS=','
          for arg in $args; do
            IFS="$save_ifs"
            func_quote_for_eval "$arg"
            lastarg="$lastarg $func_quote_for_eval_result"
          done
          IFS="$save_ifs"
          func_stripname ' ' '' "$lastarg"
          lastarg=$func_stripname_result
 
          # Add the arguments to base_compile.
          base_compile="$base_compile $lastarg"
          continue
          ;;
 
        *)
          # Accept the current argument as the source file.
          # The previous "srcfile" becomes the current argument.
          #
          lastarg="$srcfile"
          srcfile="$arg"
          ;;
        esac  #  case $arg
        ;;
      esac    #  case $arg_mode
 
      # Aesthetically quote the previous argument.
      func_quote_for_eval "$lastarg"
      base_compile="$base_compile $func_quote_for_eval_result"
    done # for arg
 
    case $arg_mode in
    arg)
      func_fatal_error "you must specify an argument for -Xcompile"
      ;;
    target)
      func_fatal_error "you must specify a target with \`-o'"
      ;;
    *)
      # Get the name of the library object.
      test -z "$libobj" && {
        func_basename "$srcfile"
        libobj="$func_basename_result"
      }
      ;;
    esac
 
    # Recognize several different file suffixes.
    # If the user specifies -o file.o, it is replaced with file.lo
    xform='[cCFSifmso]'
    case $libobj in
    *.ada) xform=ada ;;
    *.adb) xform=adb ;;
    *.ads) xform=ads ;;
    *.asm) xform=asm ;;
    *.c++) xform=c++ ;;
    *.cc) xform=cc ;;
    *.ii) xform=ii ;;
    *.class) xform=class ;;
    *.cpp) xform=cpp ;;
    *.cxx) xform=cxx ;;
    *.[fF][09]?) xform='[fF][09].' ;;
    *.for) xform=for ;;
    *.java) xform=java ;;
    *.obj) xform=obj ;;
    esac
 
    libobj=`$ECHO "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
 
    case $libobj in
    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
    *)
      func_fatal_error "cannot determine name of library object from \`$libobj'"
      ;;
    esac
 
    func_infer_tag $base_compile
 
    for arg in $later; do
      case $arg in
      -shared)
        test "$build_libtool_libs" != yes && \
          func_fatal_configuration "can not build a shared library"
        build_old_libs=no
        continue
        ;;
 
      -static)
        build_libtool_libs=no
        build_old_libs=yes
        continue
        ;;
 
      -prefer-pic)
        pic_mode=yes
        continue
        ;;
 
      -prefer-non-pic)
        pic_mode=no
        continue
        ;;
      esac
    done
 
    func_quote_for_eval "$libobj"
    test "X$libobj" != "X$func_quote_for_eval_result" \
      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'   &()|`$[]' \
      && func_warning "libobj name \`$libobj' may not contain shell special characters."
    func_basename "$obj"
    objname="$func_basename_result"
    func_dirname "$obj" "/" ""
    xdir="$func_dirname_result"
    lobj=${xdir}$objdir/$objname
 
    test -z "$base_compile" && \
      func_fatal_help "you must specify a compilation command"
 
    # Delete any leftover library objects.
    if test "$build_old_libs" = yes; then
      removelist="$obj $lobj $libobj ${libobj}T"
    else
      removelist="$lobj $libobj ${libobj}T"
    fi
 
    $opt_dry_run || $RM $removelist
    trap "$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE" 1 2 15
 
    # On Cygwin there's no "real" PIC flag so we must build both object types
    case $host_os in
    cygwin* | mingw* | pw32* | os2*)
      pic_mode=default
      ;;
    esac
    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
      # non-PIC code in shared libraries is not supported
      pic_mode=default
    fi
 
    # Calculate the filename of the output object if compiler does
    # not support -o with -c
    if test "$compiler_c_o" = no; then
      output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
      lockfile="$output_obj.lock"
      removelist="$removelist $output_obj $lockfile"
      trap "$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE" 1 2 15
    else
      output_obj=
      need_locks=no
      lockfile=
    fi
 
    # Lock this critical section if it is needed
    # We use this script file to make the link, it avoids creating a new file
    if test "$need_locks" = yes; then
      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
        func_echo "Waiting for $lockfile to be removed"
        sleep 2
      done
    elif test "$need_locks" = warn; then
      if test -f "$lockfile"; then
        $ECHO "\
*** ERROR, $lockfile exists and contains:
`cat $lockfile 2>/dev/null`
 
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
your compiler does not support \`-c' and \`-o' together.  If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
 
        $opt_dry_run || $RM $removelist
        exit $EXIT_FAILURE
      fi
      $ECHO "$srcfile" > "$lockfile"
    fi
 
    if test -n "$fix_srcfile_path"; then
      eval srcfile=\"$fix_srcfile_path\"
    fi
    func_quote_for_eval "$srcfile"
    qsrcfile=$func_quote_for_eval_result
 
    $opt_dry_run || $RM "$libobj" "${libobj}T"
 
    # Only build a PIC object if we are building libtool libraries.
    if test "$build_libtool_libs" = yes; then
      # Without this assignment, base_compile gets emptied.
      fbsd_hideous_sh_bug=$base_compile
 
      if test "$pic_mode" != no; then
        command="$base_compile $qsrcfile $pic_flag"
      else
        # Don't build PIC code
        command="$base_compile $qsrcfile"
      fi
 
      func_mkdir_p "$xdir$objdir"
 
      if test -z "$output_obj"; then
        # Place PIC objects in $objdir
        command="$command -o $lobj"
      fi
 
      $opt_dry_run || $RM "$lobj" "$output_obj"
 
      func_show_eval "$command" \
          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
 
      if test "$need_locks" = warn &&
         test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
        $ECHO "\
*** ERROR, $lockfile contains:
`cat $lockfile 2>/dev/null`
 
but it should contain:
$srcfile
 
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
your compiler does not support \`-c' and \`-o' together.  If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
 
        $opt_dry_run || $RM $removelist
        exit $EXIT_FAILURE
      fi
 
      # Just move the object if needed, then go on to compile the next one
      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
        func_show_eval '$MV "$output_obj" "$lobj"' \
          'error=$?; $opt_dry_run || $RM $removelist; exit $error'
      fi
 
      # Allow error messages only from the first compilation.
      if test "$suppress_opt" = yes; then
        suppress_output=' >/dev/null 2>&1'
      fi
    fi
 
    # Only build a position-dependent object if we build old libraries.
    if test "$build_old_libs" = yes; then
      if test "$pic_mode" != yes; then
        # Don't build PIC code
        command="$base_compile $qsrcfile$pie_flag"
      else
        command="$base_compile $qsrcfile $pic_flag"
      fi
      if test "$compiler_c_o" = yes; then
        command="$command -o $obj"
      fi
 
      # Suppress compiler output if we already did a PIC compilation.
      command="$command$suppress_output"
      $opt_dry_run || $RM "$obj" "$output_obj"
      func_show_eval "$command" \
        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
 
      if test "$need_locks" = warn &&
         test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
        $ECHO "\
*** ERROR, $lockfile contains:
`cat $lockfile 2>/dev/null`
 
but it should contain:
$srcfile
 
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
your compiler does not support \`-c' and \`-o' together.  If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
 
        $opt_dry_run || $RM $removelist
        exit $EXIT_FAILURE
      fi
 
      # Just move the object if needed
      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
        func_show_eval '$MV "$output_obj" "$obj"' \
          'error=$?; $opt_dry_run || $RM $removelist; exit $error'
      fi
    fi
 
    $opt_dry_run || {
      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
 
      # Unlock the critical section if it was locked
      if test "$need_locks" != no; then
        $RM "$lockfile"
      fi
    }
 
    exit $EXIT_SUCCESS
}
 
test "$mode" = compile && func_mode_compile ${1+"$@"}
 
 
# func_mode_execute arg...
func_mode_execute ()
{
    $opt_debug
    # The first argument is the command name.
    cmd="$nonopt"
    test -z "$cmd" && \
      func_fatal_help "you must specify a COMMAND"
 
    # Handle -dlopen flags immediately.
    for file in $execute_dlfiles; do
      test -f "$file" \
        || func_fatal_help "\`$file' is not a file"
 
      dir=
      case $file in
      *.la)
        # Check to see that this really is a libtool archive.
        func_lalib_unsafe_p "$file" \
          || func_fatal_help "\`$lib' is not a valid libtool archive"
 
        # Read the libtool library.
        dlname=
        library_names=
        func_source "$file"
 
        # Skip this library if it cannot be dlopened.
        if test -z "$dlname"; then
          # Warn if it was a shared library.
          test -n "$library_names" && \
            func_warning "\`$file' was not linked with \`-export-dynamic'"
          continue
        fi
 
        func_dirname "$file" "" "."
        dir="$func_dirname_result"
 
        if test -f "$dir/$objdir/$dlname"; then
          dir="$dir/$objdir"
        else
          if test ! -f "$dir/$dlname"; then
            func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
          fi
        fi
        ;;
 
      *.lo)
        # Just add the directory containing the .lo file.
        func_dirname "$file" "" "."
        dir="$func_dirname_result"
        ;;
 
      *)
        func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
        continue
        ;;
      esac
 
      # Get the absolute pathname.
      absdir=`cd "$dir" && pwd`
      test -n "$absdir" && dir="$absdir"
 
      # Now add the directory to shlibpath_var.
      if eval "test -z \"\$$shlibpath_var\""; then
        eval "$shlibpath_var=\"\$dir\""
      else
        eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
      fi
    done
 
    # This variable tells wrapper scripts just to set shlibpath_var
    # rather than running their programs.
    libtool_execute_magic="$magic"
 
    # Check if any of the arguments is a wrapper script.
    args=
    for file
    do
      case $file in
      -*) ;;
      *)
        # Do a test to see if this is really a libtool program.
        if func_ltwrapper_p "$file"; then
          func_source "$file"
 
          # Transform arg to wrapped name.
          file="$progdir/$program"
        fi
        ;;
      esac
      # Quote arguments (to preserve shell metacharacters).
      func_quote_for_eval "$file"
      args="$args $func_quote_for_eval_result"
    done
 
    if test "X$opt_dry_run" = Xfalse; then
      if test -n "$shlibpath_var"; then
        # Export the shlibpath_var.
        eval "export $shlibpath_var"
      fi
 
      # Restore saved environment variables
      for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
      do
        eval "if test \"\${save_$lt_var+set}\" = set; then
                $lt_var=\$save_$lt_var; export $lt_var
              else
                $lt_unset $lt_var
              fi"
      done
 
      # Now prepare to actually exec the command.
      exec_cmd="\$cmd$args"
    else
      # Display what would be done.
      if test -n "$shlibpath_var"; then
        eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
        $ECHO "export $shlibpath_var"
      fi
      $ECHO "$cmd$args"
      exit $EXIT_SUCCESS
    fi
}
 
test "$mode" = execute && func_mode_execute ${1+"$@"}
 
 
# func_mode_finish arg...
func_mode_finish ()
{
    $opt_debug
    libdirs="$nonopt"
    admincmds=
 
    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
      for dir
      do
        libdirs="$libdirs $dir"
      done
 
      for libdir in $libdirs; do
        if test -n "$finish_cmds"; then
          # Do each command in the finish commands.
          func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
'"$cmd"'"'
        fi
        if test -n "$finish_eval"; then
          # Do the single finish_eval.
          eval cmds=\"$finish_eval\"
          $opt_dry_run || eval "$cmds" || admincmds="$admincmds
       $cmds"
        fi
      done
    fi
 
    # Exit here if they wanted silent mode.
    $opt_silent && exit $EXIT_SUCCESS
 
    $ECHO "X----------------------------------------------------------------------" | $Xsed
    $ECHO "Libraries have been installed in:"
    for libdir in $libdirs; do
      $ECHO "   $libdir"
    done
    $ECHO
    $ECHO "If you ever happen to want to link against installed libraries"
    $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
    $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
    $ECHO "flag during linking and do at least one of the following:"
    if test -n "$shlibpath_var"; then
      $ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"
      $ECHO "     during execution"
    fi
    if test -n "$runpath_var"; then
      $ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"
      $ECHO "     during linking"
    fi
    if test -n "$hardcode_libdir_flag_spec"; then
      libdir=LIBDIR
      eval flag=\"$hardcode_libdir_flag_spec\"
 
      $ECHO "   - use the \`$flag' linker flag"
    fi
    if test -n "$admincmds"; then
      $ECHO "   - have your system administrator run these commands:$admincmds"
    fi
    if test -f /etc/ld.so.conf; then
      $ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
    fi
    $ECHO
 
    $ECHO "See any operating system documentation about shared libraries for"
    case $host in
      solaris2.[6789]|solaris2.1[0-9])
        $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
        $ECHO "pages."
        ;;
      *)
        $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
        ;;
    esac
    $ECHO "X----------------------------------------------------------------------" | $Xsed
    exit $EXIT_SUCCESS
}
 
test "$mode" = finish && func_mode_finish ${1+"$@"}
 
 
# func_mode_install arg...
func_mode_install ()
{
    $opt_debug
    # There may be an optional sh(1) argument at the beginning of
    # install_prog (especially on Windows NT).
    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
       # Allow the use of GNU shtool's install command.
       $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
      # Aesthetically quote it.
      func_quote_for_eval "$nonopt"
      install_prog="$func_quote_for_eval_result "
      arg=$1
      shift
    else
      install_prog=
      arg=$nonopt
    fi
 
    # The real first argument should be the name of the installation program.
    # Aesthetically quote it.
    func_quote_for_eval "$arg"
    install_prog="$install_prog$func_quote_for_eval_result"
 
    # We need to accept at least all the BSD install flags.
    dest=
    files=
    opts=
    prev=
    install_type=
    isdir=no
    stripme=
    for arg
    do
      if test -n "$dest"; then
        files="$files $dest"
        dest=$arg
        continue
      fi
 
      case $arg in
      -d) isdir=yes ;;
      -f)
        case " $install_prog " in
        *[\\\ /]cp\ *) ;;
        *) prev=$arg ;;
        esac
        ;;
      -g | -m | -o)
        prev=$arg
        ;;
      -s)
        stripme=" -s"
        continue
        ;;
      -*)
        ;;
      *)
        # If the previous option needed an argument, then skip it.
        if test -n "$prev"; then
          prev=
        else
          dest=$arg
          continue
        fi
        ;;
      esac
 
      # Aesthetically quote the argument.
      func_quote_for_eval "$arg"
      install_prog="$install_prog $func_quote_for_eval_result"
    done
 
    test -z "$install_prog" && \
      func_fatal_help "you must specify an install program"
 
    test -n "$prev" && \
      func_fatal_help "the \`$prev' option requires an argument"
 
    if test -z "$files"; then
      if test -z "$dest"; then
        func_fatal_help "no file or destination specified"
      else
        func_fatal_help "you must specify a destination"
      fi
    fi
 
    # Strip any trailing slash from the destination.
    func_stripname '' '/' "$dest"
    dest=$func_stripname_result
 
    # Check to see that the destination is a directory.
    test -d "$dest" && isdir=yes
    if test "$isdir" = yes; then
      destdir="$dest"
      destname=
    else
      func_dirname "$dest" "" "."
      destdir="$func_dirname_result"
      func_basename "$dest"
      destname="$func_basename_result"
 
      # Not a directory, so check to see that there is only one file specified.
      set dummy $files; shift
      test "$#" -gt 1 && \
        func_fatal_help "\`$dest' is not a directory"
    fi
    case $destdir in
    [\\/]* | [A-Za-z]:[\\/]*) ;;
    *)
      for file in $files; do
        case $file in
        *.lo) ;;
        *)
          func_fatal_help "\`$destdir' must be an absolute directory name"
          ;;
        esac
      done
      ;;
    esac
 
    # This variable tells wrapper scripts just to set variables rather
    # than running their programs.
    libtool_install_magic="$magic"
 
    staticlibs=
    future_libdirs=
    current_libdirs=
    for file in $files; do
 
      # Do each installation.
      case $file in
      *.$libext)
        # Do the static libraries later.
        staticlibs="$staticlibs $file"
        ;;
 
      *.la)
        # Check to see that this really is a libtool archive.
        func_lalib_unsafe_p "$file" \
          || func_fatal_help "\`$file' is not a valid libtool archive"
 
        library_names=
        old_library=
        relink_command=
        func_source "$file"
 
        # Add the libdir to current_libdirs if it is the destination.
        if test "X$destdir" = "X$libdir"; then
          case "$current_libdirs " in
          *" $libdir "*) ;;
          *) current_libdirs="$current_libdirs $libdir" ;;
          esac
        else
          # Note the libdir as a future libdir.
          case "$future_libdirs " in
          *" $libdir "*) ;;
          *) future_libdirs="$future_libdirs $libdir" ;;
          esac
        fi
 
        func_dirname "$file" "/" ""
        dir="$func_dirname_result"
        dir="$dir$objdir"
 
        if test -n "$relink_command"; then
          # Determine the prefix the user has applied to our future dir.
          inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
 
          # Don't allow the user to place us outside of our expected
          # location b/c this prevents finding dependent libraries that
          # are installed to the same prefix.
          # At present, this check doesn't affect windows .dll's that
          # are installed into $libdir/../bin (currently, that works fine)
          # but it's something to keep an eye on.
          test "$inst_prefix_dir" = "$destdir" && \
            func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
 
          if test -n "$inst_prefix_dir"; then
            # Stick the inst_prefix_dir data into the link command.
            relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
          else
            relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
          fi
 
          func_warning "relinking \`$file'"
          func_show_eval "$relink_command" \
            'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
        fi
 
        # See the names of the shared library.
        set dummy $library_names; shift
        if test -n "$1"; then
          realname="$1"
          shift
 
          srcname="$realname"
          test -n "$relink_command" && srcname="$realname"T
 
          # Install the shared library and build the symlinks.
          func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
              'exit $?'
          tstripme="$stripme"
          case $host_os in
          cygwin* | mingw* | pw32*)
            case $realname in
            *.dll.a)
              tstripme=""
              ;;
            esac
            ;;
          esac
          if test -n "$tstripme" && test -n "$striplib"; then
            func_show_eval "$striplib $destdir/$realname" 'exit $?'
          fi
 
          if test "$#" -gt 0; then
            # Delete the old symlinks, and create new ones.
            # Try `ln -sf' first, because the `ln' binary might depend on
            # the symlink we replace!  Solaris /bin/ln does not understand -f,
            # so we also need to try rm && ln -s.
            for linkname
            do
              test "$linkname" != "$realname" \
                && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
            done
          fi
 
          # Do each command in the postinstall commands.
          lib="$destdir/$realname"
          func_execute_cmds "$postinstall_cmds" 'exit $?'
        fi
 
        # Install the pseudo-library for information purposes.
        func_basename "$file"
        name="$func_basename_result"
        instname="$dir/$name"i
        func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
 
        # Maybe install the static library, too.
        test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
        ;;
 
      *.lo)
        # Install (i.e. copy) a libtool object.
 
        # Figure out destination file name, if it wasn't already specified.
        if test -n "$destname"; then
          destfile="$destdir/$destname"
        else
          func_basename "$file"
          destfile="$func_basename_result"
          destfile="$destdir/$destfile"
        fi
 
        # Deduce the name of the destination old-style object file.
        case $destfile in
        *.lo)
          func_lo2o "$destfile"
          staticdest=$func_lo2o_result
          ;;
        *.$objext)
          staticdest="$destfile"
          destfile=
          ;;
        *)
          func_fatal_help "cannot copy a libtool object to \`$destfile'"
          ;;
        esac
 
        # Install the libtool object if requested.
        test -n "$destfile" && \
          func_show_eval "$install_prog $file $destfile" 'exit $?'
 
        # Install the old object if enabled.
        if test "$build_old_libs" = yes; then
          # Deduce the name of the old-style object file.
          func_lo2o "$file"
          staticobj=$func_lo2o_result
          func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
        fi
        exit $EXIT_SUCCESS
        ;;
 
      *)
        # Figure out destination file name, if it wasn't already specified.
        if test -n "$destname"; then
          destfile="$destdir/$destname"
        else
          func_basename "$file"
          destfile="$func_basename_result"
          destfile="$destdir/$destfile"
        fi
 
        # If the file is missing, and there is a .exe on the end, strip it
        # because it is most likely a libtool script we actually want to
        # install
        stripped_ext=""
        case $file in
          *.exe)
            if test ! -f "$file"; then
              func_stripname '' '.exe' "$file"
              file=$func_stripname_result
              stripped_ext=".exe"
            fi
            ;;
        esac
 
        # Do a test to see if this is really a libtool program.
        case $host in
        *cygwin*|*mingw*)
            func_stripname '' '.exe' "$file"
            wrapper=$func_stripname_result
            ;;
        *)
            wrapper=$file
            ;;
        esac
        if func_ltwrapper_p "$wrapper"; then
          notinst_deplibs=
          relink_command=
 
          func_source "$wrapper"
 
          # Check the variables that should have been set.
          test -z "$generated_by_libtool_version" && \
            func_fatal_error "invalid libtool wrapper script \`$wrapper'"
 
          finalize=yes
          for lib in $notinst_deplibs; do
            # Check to see that each library is installed.
            libdir=
            if test -f "$lib"; then
              func_source "$lib"
            fi
            libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
            if test -n "$libdir" && test ! -f "$libfile"; then
              func_warning "\`$lib' has not been installed in \`$libdir'"
              finalize=no
            fi
          done
 
          relink_command=
          func_source "$wrapper"
 
          outputname=
          if test "$fast_install" = no && test -n "$relink_command"; then
            $opt_dry_run || {
              if test "$finalize" = yes; then
                tmpdir=`func_mktempdir`
                func_basename "$file$stripped_ext"
                file="$func_basename_result"
                outputname="$tmpdir/$file"
                # Replace the output file specification.
                relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
 
                $opt_silent || {
                  func_quote_for_expand "$relink_command"
                  eval "func_echo $func_quote_for_expand_result"
                }
                if eval "$relink_command"; then :
                  else
                  func_error "error: relink \`$file' with the above command before installing it"
                  $opt_dry_run || ${RM}r "$tmpdir"
                  continue
                fi
                file="$outputname"
              else
                func_warning "cannot relink \`$file'"
              fi
            }
          else
            # Install the binary that we compiled earlier.
            file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
          fi
        fi
 
        # remove .exe since cygwin /usr/bin/install will append another
        # one anyway
        case $install_prog,$host in
        */usr/bin/install*,*cygwin*)
          case $file:$destfile in
          *.exe:*.exe)
            # this is ok
            ;;
          *.exe:*)
            destfile=$destfile.exe
            ;;
          *:*.exe)
            func_stripname '' '.exe' "$destfile"
            destfile=$func_stripname_result
            ;;
          esac
          ;;
        esac
        func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
        $opt_dry_run || if test -n "$outputname"; then
          ${RM}r "$tmpdir"
        fi
        ;;
      esac
    done
 
    for file in $staticlibs; do
      func_basename "$file"
      name="$func_basename_result"
 
      # Set up the ranlib parameters.
      oldlib="$destdir/$name"
 
      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
 
      if test -n "$stripme" && test -n "$old_striplib"; then
        func_show_eval "$old_striplib $oldlib" 'exit $?'
      fi
 
      # Do each command in the postinstall commands.
      func_execute_cmds "$old_postinstall_cmds" 'exit $?'
    done
 
    test -n "$future_libdirs" && \
      func_warning "remember to run \`$progname --finish$future_libdirs'"
 
    if test -n "$current_libdirs"; then
      # Maybe just do a dry run.
      $opt_dry_run && current_libdirs=" -n$current_libdirs"
      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
    else
      exit $EXIT_SUCCESS
    fi
}
 
test "$mode" = install && func_mode_install ${1+"$@"}
 
 
# func_mode_link arg...
func_mode_link ()
{
    $opt_debug
    case $host in
    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
      # It is impossible to link a dll without this setting, and
      # we shouldn't force the makefile maintainer to figure out
      # which system we are compiling for in order to pass an extra
      # flag for every libtool invocation.
      # allow_undefined=no
 
      # FIXME: Unfortunately, there are problems with the above when trying
      # to make a dll which has undefined symbols, in which case not
      # even a static library is built.  For now, we need to specify
      # -no-undefined on the libtool link line when we can be certain
      # that all symbols are satisfied, otherwise we get a static library.
      allow_undefined=yes
      ;;
    *)
      allow_undefined=yes
      ;;
    esac
    libtool_args=$nonopt
    base_compile="$nonopt $@"
    compile_command=$nonopt
    finalize_command=$nonopt
 
    compile_rpath=
    finalize_rpath=
    compile_shlibpath=
    finalize_shlibpath=
    convenience=
    old_convenience=
    deplibs=
    old_deplibs=
    compiler_flags=
    linker_flags=
    dllsearchpath=
    lib_search_path=`pwd`
    inst_prefix_dir=
    new_inherited_linker_flags=
 
    avoid_version=no
    dlfiles=
    dlprefiles=
    dlself=no
    export_dynamic=no
    export_symbols=
    export_symbols_regex=
    generated=
    libobjs=
    ltlibs=
    module=no
    no_install=no
    objs=
    non_pic_objects=
    precious_files_regex=
    prefer_static_libs=no
    preload=no
    prev=
    prevarg=
    release=
    rpath=
    xrpath=
    perm_rpath=
    temp_rpath=
    thread_safe=no
    vinfo=
    vinfo_number=no
    weak_libs=
    single_module="${wl}-single_module"
    func_infer_tag $base_compile
 
    # We need to know -static, to get the right output filenames.
    for arg
    do
      case $arg in
      -shared)
        test "$build_libtool_libs" != yes && \
          func_fatal_configuration "can not build a shared library"
        build_old_libs=no
        break
        ;;
      -all-static | -static | -static-libtool-libs)
        case $arg in
        -all-static)
          if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
            func_warning "complete static linking is impossible in this configuration"
          fi
          if test -n "$link_static_flag"; then
            dlopen_self=$dlopen_self_static
            # See comment for -static flag below, for more details.
            func_append compile_command " $link_static_flag"
            func_append finalize_command " $link_static_flag"
          fi
          prefer_static_libs=yes
          ;;
        -static)
          if test -z "$pic_flag" && test -n "$link_static_flag"; then
            dlopen_self=$dlopen_self_static
          fi
          prefer_static_libs=built
          ;;
        -static-libtool-libs)
          if test -z "$pic_flag" && test -n "$link_static_flag"; then
            dlopen_self=$dlopen_self_static
          fi
          prefer_static_libs=yes
          ;;
        esac
        build_libtool_libs=no
        build_old_libs=yes
        break
        ;;
      esac
    done
 
    # See if our shared archives depend on static archives.
    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
 
    # Go through the arguments, transforming them on the way.
    while test "$#" -gt 0; do
      arg="$1"
      shift
      func_quote_for_eval "$arg"
      qarg=$func_quote_for_eval_unquoted_result
      func_append libtool_args " $func_quote_for_eval_result"
 
      # If the previous option needs an argument, assign it.
      if test -n "$prev"; then
        case $prev in
        output)
          func_append compile_command " @OUTPUT@"
          func_append finalize_command " @OUTPUT@"
          ;;
        esac
 
        case $prev in
        dlfiles|dlprefiles)
          if test "$preload" = no; then
            # Add the symbol object into the linking commands.
            func_append compile_command " @SYMFILE@"
            func_append finalize_command " @SYMFILE@"
            preload=yes
          fi
          case $arg in
          *.la | *.lo) ;;  # We handle these cases below.
          force)
            if test "$dlself" = no; then
              dlself=needless
              export_dynamic=yes
            fi
            prev=
            continue
            ;;
          self)
            if test "$prev" = dlprefiles; then
              dlself=yes
            elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
              dlself=yes
            else
              dlself=needless
              export_dynamic=yes
            fi
            prev=
            continue
            ;;
          *)
            if test "$prev" = dlfiles; then
              dlfiles="$dlfiles $arg"
            else
              dlprefiles="$dlprefiles $arg"
            fi
            prev=
            continue
            ;;
          esac
          ;;
        expsyms)
          export_symbols="$arg"
          test -f "$arg" \
            || func_fatal_error "symbol file \`$arg' does not exist"
          prev=
          continue
          ;;
        expsyms_regex)
          export_symbols_regex="$arg"
          prev=
          continue
          ;;
        framework)
          case $host in
            *-*-darwin*)
              case "$deplibs " in
                *" $qarg.ltframework "*) ;;
                *) deplibs="$deplibs $qarg.ltframework" # this is fixed later
                   ;;
              esac
              ;;
          esac
          prev=
          continue
          ;;
        inst_prefix)
          inst_prefix_dir="$arg"
          prev=
          continue
          ;;
        objectlist)
          if test -f "$arg"; then
            save_arg=$arg
            moreargs=
            for fil in `cat "$save_arg"`
            do
#             moreargs="$moreargs $fil"
              arg=$fil
              # A libtool-controlled object.
 
              # Check to see that this really is a libtool object.
              if func_lalib_unsafe_p "$arg"; then
                pic_object=
                non_pic_object=
 
                # Read the .lo file
                func_source "$arg"
 
                if test -z "$pic_object" ||
                   test -z "$non_pic_object" ||
                   test "$pic_object" = none &&
                   test "$non_pic_object" = none; then
                  func_fatal_error "cannot find name of object for \`$arg'"
                fi
 
                # Extract subdirectory from the argument.
                func_dirname "$arg" "/" ""
                xdir="$func_dirname_result"
 
                if test "$pic_object" != none; then
                  # Prepend the subdirectory the object is found in.
                  pic_object="$xdir$pic_object"
 
                  if test "$prev" = dlfiles; then
                    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
                      dlfiles="$dlfiles $pic_object"
                      prev=
                      continue
                    else
                      # If libtool objects are unsupported, then we need to preload.
                      prev=dlprefiles
                    fi
                  fi
 
                  # CHECK ME:  I think I busted this.  -Ossama
                  if test "$prev" = dlprefiles; then
                    # Preload the old-style object.
                    dlprefiles="$dlprefiles $pic_object"
                    prev=
                  fi
 
                  # A PIC object.
                  func_append libobjs " $pic_object"
                  arg="$pic_object"
                fi
 
                # Non-PIC object.
                if test "$non_pic_object" != none; then
                  # Prepend the subdirectory the object is found in.
                  non_pic_object="$xdir$non_pic_object"
 
                  # A standard non-PIC object
                  func_append non_pic_objects " $non_pic_object"
                  if test -z "$pic_object" || test "$pic_object" = none ; then
                    arg="$non_pic_object"
                  fi
                else
                  # If the PIC object exists, use it instead.
                  # $xdir was prepended to $pic_object above.
                  non_pic_object="$pic_object"
                  func_append non_pic_objects " $non_pic_object"
                fi
              else
                # Only an error if not doing a dry-run.
                if $opt_dry_run; then
                  # Extract subdirectory from the argument.
                  func_dirname "$arg" "/" ""
                  xdir="$func_dirname_result"
 
                  func_lo2o "$arg"
                  pic_object=$xdir$objdir/$func_lo2o_result
                  non_pic_object=$xdir$func_lo2o_result
                  func_append libobjs " $pic_object"
                  func_append non_pic_objects " $non_pic_object"
                else
                  func_fatal_error "\`$arg' is not a valid libtool object"
                fi
              fi
            done
          else
            func_fatal_error "link input file \`$arg' does not exist"
          fi
          arg=$save_arg
          prev=
          continue
          ;;
        precious_regex)
          precious_files_regex="$arg"
          prev=
          continue
          ;;
        release)
          release="-$arg"
          prev=
          continue
          ;;
        rpath | xrpath)
          # We need an absolute path.
          case $arg in
          [\\/]* | [A-Za-z]:[\\/]*) ;;
          *)
            func_fatal_error "only absolute run-paths are allowed"
            ;;
          esac
          if test "$prev" = rpath; then
            case "$rpath " in
            *" $arg "*) ;;
            *) rpath="$rpath $arg" ;;
            esac
          else
            case "$xrpath " in
            *" $arg "*) ;;
            *) xrpath="$xrpath $arg" ;;
            esac
          fi
          prev=
          continue
          ;;
        shrext)
          shrext_cmds="$arg"
          prev=
          continue
          ;;
        weak)
          weak_libs="$weak_libs $arg"
          prev=
          continue
          ;;
        xcclinker)
          linker_flags="$linker_flags $qarg"
          compiler_flags="$compiler_flags $qarg"
          prev=
          func_append compile_command " $qarg"
          func_append finalize_command " $qarg"
          continue
          ;;
        xcompiler)
          compiler_flags="$compiler_flags $qarg"
          prev=
          func_append compile_command " $qarg"
          func_append finalize_command " $qarg"
          continue
          ;;
        xlinker)
          linker_flags="$linker_flags $qarg"
          compiler_flags="$compiler_flags $wl$qarg"
          prev=
          func_append compile_command " $wl$qarg"
          func_append finalize_command " $wl$qarg"
          continue
          ;;
        *)
          eval "$prev=\"\$arg\""
          prev=
          continue
          ;;
        esac
      fi # test -n "$prev"
 
      prevarg="$arg"
 
      case $arg in
      -all-static)
        # The effects of -all-static are defined in a previous loop.
        continue
        ;;
 
      -allow-undefined)
        # FIXME: remove this flag sometime in the future.
        func_fatal_error "\`-allow-undefined' must not be used because it is the default"
        ;;
 
      -avoid-version)
        avoid_version=yes
        continue
        ;;
 
      -dlopen)
        prev=dlfiles
        continue
        ;;
 
      -dlpreopen)
        prev=dlprefiles
        continue
        ;;
 
      -export-dynamic)
        export_dynamic=yes
        continue
        ;;
 
      -export-symbols | -export-symbols-regex)
        if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
          func_fatal_error "more than one -exported-symbols argument is not allowed"
        fi
        if test "X$arg" = "X-export-symbols"; then
          prev=expsyms
        else
          prev=expsyms_regex
        fi
        continue
        ;;
 
      -framework)
        prev=framework
        continue
        ;;
 
      -inst-prefix-dir)
        prev=inst_prefix
        continue
        ;;
 
      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
      # so, if we see these flags be careful not to treat them like -L
      -L[A-Z][A-Z]*:*)
        case $with_gcc/$host in
        no/*-*-irix* | /*-*-irix*)
          func_append compile_command " $arg"
          func_append finalize_command " $arg"
          ;;
        esac
        continue
        ;;
 
      -L*)
        func_stripname '-L' '' "$arg"
        dir=$func_stripname_result
        # We need an absolute path.
        case $dir in
        [\\/]* | [A-Za-z]:[\\/]*) ;;
        *)
          absdir=`cd "$dir" && pwd`
          test -z "$absdir" && \
            func_fatal_error "cannot determine absolute directory name of \`$dir'"
          dir="$absdir"
          ;;
        esac
        case "$deplibs " in
        *" -L$dir "*) ;;
        *)
          deplibs="$deplibs -L$dir"
          lib_search_path="$lib_search_path $dir"
          ;;
        esac
        case $host in
        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
          testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
          case :$dllsearchpath: in
          *":$dir:"*) ;;
          *) dllsearchpath="$dllsearchpath:$dir";;
          esac
          case :$dllsearchpath: in
          *":$testbindir:"*) ;;
          *) dllsearchpath="$dllsearchpath:$testbindir";;
          esac
          ;;
        esac
        continue
        ;;
 
      -l*)
        if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
          case $host in
          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
            # These systems don't actually have a C or math library (as such)
            continue
            ;;
          *-*-os2*)
            # These systems don't actually have a C library (as such)
            test "X$arg" = "X-lc" && continue
            ;;
          *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
            # Do not include libc due to us having libc/libc_r.
            test "X$arg" = "X-lc" && continue
            ;;
          *-*-rhapsody* | *-*-darwin1.[012])
            # Rhapsody C and math libraries are in the System framework
            deplibs="$deplibs System.ltframework"
            continue
            ;;
          *-*-sco3.2v5* | *-*-sco5v6*)
            # Causes problems with __ctype
            test "X$arg" = "X-lc" && continue
            ;;
          *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
            # Compiler inserts libc in the correct place for threads to work
            test "X$arg" = "X-lc" && continue
            ;;
          esac
        elif test "X$arg" = "X-lc_r"; then
         case $host in
         *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
           # Do not include libc_r directly, use -pthread flag.
           continue
           ;;
         esac
        fi
        deplibs="$deplibs $arg"
        continue
        ;;
 
      -module)
        module=yes
        continue
        ;;
 
      # Tru64 UNIX uses -model [arg] to determine the layout of C++
      # classes, name mangling, and exception handling.
      # Darwin uses the -arch flag to determine output architecture.
      -model|-arch|-isysroot)
        compiler_flags="$compiler_flags $arg"
        func_append compile_command " $arg"
        func_append finalize_command " $arg"
        prev=xcompiler
        continue
        ;;
 
      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
        compiler_flags="$compiler_flags $arg"
        func_append compile_command " $arg"
        func_append finalize_command " $arg"
        case "$new_inherited_linker_flags " in
            *" $arg "*) ;;
            * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
        esac
        continue
        ;;
 
      -multi_module)
        single_module="${wl}-multi_module"
        continue
        ;;
 
      -no-fast-install)
        fast_install=no
        continue
        ;;
 
      -no-install)
        case $host in
        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
          # The PATH hackery in wrapper scripts is required on Windows
          # in order for the loader to find any dlls it needs.
          func_warning "\`-no-install' is ignored for $host"
          func_warning "assuming \`-no-fast-install' instead"
          fast_install=no
          ;;
        *) no_install=yes ;;
        esac
        continue
        ;;
 
      -no-undefined)
        allow_undefined=no
        continue
        ;;
 
      -objectlist)
        prev=objectlist
        continue
        ;;
 
      -o) prev=output ;;
 
      -precious-files-regex)
        prev=precious_regex
        continue
        ;;
 
      -release)
        prev=release
        continue
        ;;
 
      -rpath)
        prev=rpath
        continue
        ;;
 
      -R)
        prev=xrpath
        continue
        ;;
 
      -R*)
        func_stripname '-R' '' "$arg"
        dir=$func_stripname_result
        # We need an absolute path.
        case $dir in
        [\\/]* | [A-Za-z]:[\\/]*) ;;
        *)
          func_fatal_error "only absolute run-paths are allowed"
          ;;
        esac
        case "$xrpath " in
        *" $dir "*) ;;
        *) xrpath="$xrpath $dir" ;;
        esac
        continue
        ;;
 
      -shared)
        # The effects of -shared are defined in a previous loop.
        continue
        ;;
 
      -shrext)
        prev=shrext
        continue
        ;;
 
      -static | -static-libtool-libs)
        # The effects of -static are defined in a previous loop.
        # We used to do the same as -all-static on platforms that
        # didn't have a PIC flag, but the assumption that the effects
        # would be equivalent was wrong.  It would break on at least
        # Digital Unix and AIX.
        continue
        ;;
 
      -thread-safe)
        thread_safe=yes
        continue
        ;;
 
      -version-info)
        prev=vinfo
        continue
        ;;
 
      -version-number)
        prev=vinfo
        vinfo_number=yes
        continue
        ;;
 
      -weak)
        prev=weak
        continue
        ;;
 
      -Wc,*)
        func_stripname '-Wc,' '' "$arg"
        args=$func_stripname_result
        arg=
        save_ifs="$IFS"; IFS=','
        for flag in $args; do
          IFS="$save_ifs"
          func_quote_for_eval "$flag"
          arg="$arg $wl$func_quote_for_eval_result"
          compiler_flags="$compiler_flags $func_quote_for_eval_result"
        done
        IFS="$save_ifs"
        func_stripname ' ' '' "$arg"
        arg=$func_stripname_result
        ;;
 
      -Wl,*)
        func_stripname '-Wl,' '' "$arg"
        args=$func_stripname_result
        arg=
        save_ifs="$IFS"; IFS=','
        for flag in $args; do
          IFS="$save_ifs"
          func_quote_for_eval "$flag"
          arg="$arg $wl$func_quote_for_eval_result"
          compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
          linker_flags="$linker_flags $func_quote_for_eval_result"
        done
        IFS="$save_ifs"
        func_stripname ' ' '' "$arg"
        arg=$func_stripname_result
        ;;
 
      -Xcompiler)
        prev=xcompiler
        continue
        ;;
 
      -Xlinker)
        prev=xlinker
        continue
        ;;
 
      -XCClinker)
        prev=xcclinker
        continue
        ;;
 
      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
      # -r[0-9][0-9]* specifies the processor on the SGI compiler
      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
      # +DA*, +DD* enable 64-bit mode on the HP compiler
      # -q* pass through compiler args for the IBM compiler
      # -m*, -t[45]*, -txscale* pass through architecture-specific
      # compiler args for GCC
      # -F/path gives path to uninstalled frameworks, gcc on darwin
      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
      # @file GCC response files
      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
        func_quote_for_eval "$arg"
        arg="$func_quote_for_eval_result"
        func_append compile_command " $arg"
        func_append finalize_command " $arg"
        compiler_flags="$compiler_flags $arg"
        continue
        ;;
 
      # Some other compiler flag.
      -* | +*)
        func_quote_for_eval "$arg"
        arg="$func_quote_for_eval_result"
        ;;
 
      *.$objext)
        # A standard object.
        objs="$objs $arg"
        ;;
 
      *.lo)
        # A libtool-controlled object.
 
        # Check to see that this really is a libtool object.
        if func_lalib_unsafe_p "$arg"; then
          pic_object=
          non_pic_object=
 
          # Read the .lo file
          func_source "$arg"
 
          if test -z "$pic_object" ||
             test -z "$non_pic_object" ||
             test "$pic_object" = none &&
             test "$non_pic_object" = none; then
            func_fatal_error "cannot find name of object for \`$arg'"
          fi
 
          # Extract subdirectory from the argument.
          func_dirname "$arg" "/" ""
          xdir="$func_dirname_result"
 
          if test "$pic_object" != none; then
            # Prepend the subdirectory the object is found in.
            pic_object="$xdir$pic_object"
 
            if test "$prev" = dlfiles; then
              if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
                dlfiles="$dlfiles $pic_object"
                prev=
                continue
              else
                # If libtool objects are unsupported, then we need to preload.
                prev=dlprefiles
              fi
            fi
 
            # CHECK ME:  I think I busted this.  -Ossama
            if test "$prev" = dlprefiles; then
              # Preload the old-style object.
              dlprefiles="$dlprefiles $pic_object"
              prev=
            fi
 
            # A PIC object.
            func_append libobjs " $pic_object"
            arg="$pic_object"
          fi
 
          # Non-PIC object.
          if test "$non_pic_object" != none; then
            # Prepend the subdirectory the object is found in.
            non_pic_object="$xdir$non_pic_object"
 
            # A standard non-PIC object
            func_append non_pic_objects " $non_pic_object"
            if test -z "$pic_object" || test "$pic_object" = none ; then
              arg="$non_pic_object"
            fi
          else
            # If the PIC object exists, use it instead.
            # $xdir was prepended to $pic_object above.
            non_pic_object="$pic_object"
            func_append non_pic_objects " $non_pic_object"
          fi
        else
          # Only an error if not doing a dry-run.
          if $opt_dry_run; then
            # Extract subdirectory from the argument.
            func_dirname "$arg" "/" ""
            xdir="$func_dirname_result"
 
            func_lo2o "$arg"
            pic_object=$xdir$objdir/$func_lo2o_result
            non_pic_object=$xdir$func_lo2o_result
            func_append libobjs " $pic_object"
            func_append non_pic_objects " $non_pic_object"
          else
            func_fatal_error "\`$arg' is not a valid libtool object"
          fi
        fi
        ;;
 
      *.$libext)
        # An archive.
        deplibs="$deplibs $arg"
        old_deplibs="$old_deplibs $arg"
        continue
        ;;
 
      *.la)
        # A libtool-controlled library.
 
        if test "$prev" = dlfiles; then
          # This library was specified with -dlopen.
          dlfiles="$dlfiles $arg"
          prev=
        elif test "$prev" = dlprefiles; then
          # The library was specified with -dlpreopen.
          dlprefiles="$dlprefiles $arg"
          prev=
        else
          deplibs="$deplibs $arg"
        fi
        continue
        ;;
 
      # Some other compiler argument.
      *)
        # Unknown arguments in both finalize_command and compile_command need
        # to be aesthetically quoted because they are evaled later.
        func_quote_for_eval "$arg"
        arg="$func_quote_for_eval_result"
        ;;
      esac # arg
 
      # Now actually substitute the argument into the commands.
      if test -n "$arg"; then
        func_append compile_command " $arg"
        func_append finalize_command " $arg"
      fi
    done # argument parsing loop
 
    test -n "$prev" && \
      func_fatal_help "the \`$prevarg' option requires an argument"
 
    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
      eval arg=\"$export_dynamic_flag_spec\"
      func_append compile_command " $arg"
      func_append finalize_command " $arg"
    fi
 
    oldlibs=
    # calculate the name of the file, without its directory
    func_basename "$output"
    outputname="$func_basename_result"
    libobjs_save="$libobjs"
 
    if test -n "$shlibpath_var"; then
      # get the directories listed in $shlibpath_var
      eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
    else
      shlib_search_path=
    fi
    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
 
    func_dirname "$output" "/" ""
    output_objdir="$func_dirname_result$objdir"
    # Create the object directory.
    func_mkdir_p "$output_objdir"
 
    # Determine the type of output
    case $output in
    "")
      func_fatal_help "you must specify an output file"
      ;;
    *.$libext) linkmode=oldlib ;;
    *.lo | *.$objext) linkmode=obj ;;
    *.la) linkmode=lib ;;
    *) linkmode=prog ;; # Anything else should be a program.
    esac
 
    specialdeplibs=
 
    libs=
    # Find all interdependent deplibs by searching for libraries
    # that are linked more than once (e.g. -la -lb -la)
    for deplib in $deplibs; do
      if $opt_duplicate_deps ; then
        case "$libs " in
        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
        esac
      fi
      libs="$libs $deplib"
    done
 
    if test "$linkmode" = lib; then
      libs="$predeps $libs $compiler_lib_search_path $postdeps"
 
      # Compute libraries that are listed more than once in $predeps
      # $postdeps and mark them as special (i.e., whose duplicates are
      # not to be eliminated).
      pre_post_deps=
      if $opt_duplicate_compiler_generated_deps; then
        for pre_post_dep in $predeps $postdeps; do
          case "$pre_post_deps " in
          *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
          esac
          pre_post_deps="$pre_post_deps $pre_post_dep"
        done
      fi
      pre_post_deps=
    fi
 
    deplibs=
    newdependency_libs=
    newlib_search_path=
    need_relink=no # whether we're linking any uninstalled libtool libraries
    notinst_deplibs= # not-installed libtool libraries
    notinst_path= # paths that contain not-installed libtool libraries
 
    case $linkmode in
    lib)
        passes="conv dlpreopen link"
        for file in $dlfiles $dlprefiles; do
          case $file in
          *.la) ;;
          *)
            func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
            ;;
          esac
        done
        ;;
    prog)
        compile_deplibs=
        finalize_deplibs=
        alldeplibs=no
        newdlfiles=
        newdlprefiles=
        passes="conv scan dlopen dlpreopen link"
        ;;
    *)  passes="conv"
        ;;
    esac
 
    for pass in $passes; do
      # The preopen pass in lib mode reverses $deplibs; put it back here
      # so that -L comes before libs that need it for instance...
      if test "$linkmode,$pass" = "lib,link"; then
        ## FIXME: Find the place where the list is rebuilt in the wrong
        ##        order, and fix it there properly
        tmp_deplibs=
        for deplib in $deplibs; do
          tmp_deplibs="$deplib $tmp_deplibs"
        done
        deplibs="$tmp_deplibs"
      fi
 
      if test "$linkmode,$pass" = "lib,link" ||
         test "$linkmode,$pass" = "prog,scan"; then
        libs="$deplibs"
        deplibs=
      fi
      if test "$linkmode" = prog; then
        case $pass in
        dlopen) libs="$dlfiles" ;;
        dlpreopen) libs="$dlprefiles" ;;
        link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
        esac
      fi
      if test "$linkmode,$pass" = "lib,dlpreopen"; then
        # Collect and forward deplibs of preopened libtool libs
        for lib in $dlprefiles; do
          # Ignore non-libtool-libs
          dependency_libs=
          case $lib in
          *.la) func_source "$lib" ;;
          esac
 
          # Collect preopened libtool deplibs, except any this library
          # has declared as weak libs
          for deplib in $dependency_libs; do
            deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
            case " $weak_libs " in
            *" $deplib_base "*) ;;
            *) deplibs="$deplibs $deplib" ;;
            esac
          done
        done
        libs="$dlprefiles"
      fi
      if test "$pass" = dlopen; then
        # Collect dlpreopened libraries
        save_deplibs="$deplibs"
        deplibs=
      fi
 
      for deplib in $libs; do
        lib=
        found=no
        case $deplib in
        -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
          if test "$linkmode,$pass" = "prog,link"; then
            compile_deplibs="$deplib $compile_deplibs"
            finalize_deplibs="$deplib $finalize_deplibs"
          else
            compiler_flags="$compiler_flags $deplib"
            if test "$linkmode" = lib ; then
                case "$new_inherited_linker_flags " in
                    *" $deplib "*) ;;
                    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
                esac
            fi
          fi
          continue
          ;;
        -l*)
          if test "$linkmode" != lib && test "$linkmode" != prog; then
            func_warning "\`-l' is ignored for archives/objects"
            continue
          fi
          func_stripname '-l' '' "$deplib"
          name=$func_stripname_result
          for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
            for search_ext in .la $std_shrext .so .a; do
              # Search the libtool library
              lib="$searchdir/lib${name}${search_ext}"
              if test -f "$lib"; then
                if test "$search_ext" = ".la"; then
                  found=yes
                else
                  found=no
                fi
                break 2
              fi
            done
          done
          if test "$found" != yes; then
            # deplib doesn't seem to be a libtool library
            if test "$linkmode,$pass" = "prog,link"; then
              compile_deplibs="$deplib $compile_deplibs"
              finalize_deplibs="$deplib $finalize_deplibs"
            else
              deplibs="$deplib $deplibs"
              test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
            fi
            continue
          else # deplib is a libtool library
            # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
            # We need to do some special things here, and not later.
            if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
              case " $predeps $postdeps " in
              *" $deplib "*)
                if func_lalib_p "$lib"; then
                  library_names=
                  old_library=
                  func_source "$lib"
                  for l in $old_library $library_names; do
                    ll="$l"
                  done
                  if test "X$ll" = "X$old_library" ; then # only static version available
                    found=no
                    func_dirname "$lib" "" "."
                    ladir="$func_dirname_result"
                    lib=$ladir/$old_library
                    if test "$linkmode,$pass" = "prog,link"; then
                      compile_deplibs="$deplib $compile_deplibs"
                      finalize_deplibs="$deplib $finalize_deplibs"
                    else
                      deplibs="$deplib $deplibs"
                      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
                    fi
                    continue
                  fi
                fi
                ;;
              *) ;;
              esac
            fi
          fi
          ;; # -l
        *.ltframework)
          if test "$linkmode,$pass" = "prog,link"; then
            compile_deplibs="$deplib $compile_deplibs"
            finalize_deplibs="$deplib $finalize_deplibs"
          else
            deplibs="$deplib $deplibs"
            if test "$linkmode" = lib ; then
                case "$new_inherited_linker_flags " in
                    *" $deplib "*) ;;
                    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
                esac
            fi
          fi
          continue
          ;;
        -L*)
          case $linkmode in
          lib)
            deplibs="$deplib $deplibs"
            test "$pass" = conv && continue
            newdependency_libs="$deplib $newdependency_libs"
            func_stripname '-L' '' "$deplib"
            newlib_search_path="$newlib_search_path $func_stripname_result"
            ;;
          prog)
            if test "$pass" = conv; then
              deplibs="$deplib $deplibs"
              continue
            fi
            if test "$pass" = scan; then
              deplibs="$deplib $deplibs"
            else
              compile_deplibs="$deplib $compile_deplibs"
              finalize_deplibs="$deplib $finalize_deplibs"
            fi
            func_stripname '-L' '' "$deplib"
            newlib_search_path="$newlib_search_path $func_stripname_result"
            ;;
          *)
            func_warning "\`-L' is ignored for archives/objects"
            ;;
          esac # linkmode
          continue
          ;; # -L
        -R*)
          if test "$pass" = link; then
            func_stripname '-R' '' "$deplib"
            dir=$func_stripname_result
            # Make sure the xrpath contains only unique directories.
            case "$xrpath " in
            *" $dir "*) ;;
            *) xrpath="$xrpath $dir" ;;
            esac
          fi
          deplibs="$deplib $deplibs"
          continue
          ;;
        *.la) lib="$deplib" ;;
        *.$libext)
          if test "$pass" = conv; then
            deplibs="$deplib $deplibs"
            continue
          fi
          case $linkmode in
          lib)
            # Linking convenience modules into shared libraries is allowed,
            # but linking other static libraries is non-portable.
            case " $dlpreconveniencelibs " in
            *" $deplib "*) ;;
            *)
              valid_a_lib=no
              case $deplibs_check_method in
                match_pattern*)
                  set dummy $deplibs_check_method; shift
                  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
                  if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
                    | $EGREP "$match_pattern_regex" > /dev/null; then
                    valid_a_lib=yes
                  fi
                ;;
                pass_all)
                  valid_a_lib=yes
                ;;
              esac
              if test "$valid_a_lib" != yes; then
                $ECHO
                $ECHO "*** Warning: Trying to link with static lib archive $deplib."
                $ECHO "*** I have the capability to make that library automatically link in when"
                $ECHO "*** you link to this library.  But I can only do this if you have a"
                $ECHO "*** shared version of the library, which you do not appear to have"
                $ECHO "*** because the file extensions .$libext of this argument makes me believe"
                $ECHO "*** that it is just a static archive that I should not use here."
              else
                $ECHO
                $ECHO "*** Warning: Linking the shared library $output against the"
                $ECHO "*** static library $deplib is not portable!"
                deplibs="$deplib $deplibs"
              fi
              ;;
            esac
            continue
            ;;
          prog)
            if test "$pass" != link; then
              deplibs="$deplib $deplibs"
            else
              compile_deplibs="$deplib $compile_deplibs"
              finalize_deplibs="$deplib $finalize_deplibs"
            fi
            continue
            ;;
          esac # linkmode
          ;; # *.$libext
        *.lo | *.$objext)
          if test "$pass" = conv; then
            deplibs="$deplib $deplibs"
          elif test "$linkmode" = prog; then
            if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
              # If there is no dlopen support or we're linking statically,
              # we need to preload.
              newdlprefiles="$newdlprefiles $deplib"
              compile_deplibs="$deplib $compile_deplibs"
              finalize_deplibs="$deplib $finalize_deplibs"
            else
              newdlfiles="$newdlfiles $deplib"
            fi
          fi
          continue
          ;;
        %DEPLIBS%)
          alldeplibs=yes
          continue
          ;;
        esac # case $deplib
 
        if test "$found" = yes || test -f "$lib"; then :
        else
          func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
        fi
 
        # Check to see that this really is a libtool archive.
        func_lalib_unsafe_p "$lib" \
          || func_fatal_error "\`$lib' is not a valid libtool archive"
 
        func_dirname "$lib" "" "."
        ladir="$func_dirname_result"
 
        dlname=
        dlopen=
        dlpreopen=
        libdir=
        library_names=
        old_library=
        inherited_linker_flags=
        # If the library was installed with an old release of libtool,
        # it will not redefine variables installed, or shouldnotlink
        installed=yes
        shouldnotlink=no
        avoidtemprpath=
 
 
        # Read the .la file
        func_source "$lib"
 
        # Convert "-framework foo" to "foo.ltframework"
        if test -n "$inherited_linker_flags"; then
          tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
          for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
            case " $new_inherited_linker_flags " in
              *" $tmp_inherited_linker_flag "*) ;;
              *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
            esac
          done
        fi
        dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
        if test "$linkmode,$pass" = "prog,link"; then
          compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
          finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
        else
          compiler_flags="$compiler_flags $inherited_linker_flags"
        fi
        if test "$linkmode,$pass" = "lib,link" ||
           test "$linkmode,$pass" = "prog,scan" ||
           { test "$linkmode" != prog && test "$linkmode" != lib; }; then
          test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
          test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
        fi
 
        if test "$pass" = conv; then
          # Only check for convenience libraries
          deplibs="$lib $deplibs"
          if test -z "$libdir"; then
            if test -z "$old_library"; then
              func_fatal_error "cannot find name of link library for \`$lib'"
            fi
            # It is a libtool convenience library, so add in its objects.
            convenience="$convenience $ladir/$objdir/$old_library"
            old_convenience="$old_convenience $ladir/$objdir/$old_library"
          elif test "$linkmode" != prog && test "$linkmode" != lib; then
            func_fatal_error "\`$lib' is not a convenience library"
          fi
          tmp_libs=
          for deplib in $dependency_libs; do
            deplibs="$deplib $deplibs"
            if $opt_duplicate_deps ; then
              case "$tmp_libs " in
              *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
              esac
            fi
            tmp_libs="$tmp_libs $deplib"
          done
          continue
        fi # $pass = conv
 
 
        # Get the name of the library we link against.
        linklib=
        for l in $old_library $library_names; do
          linklib="$l"
        done
        if test -z "$linklib"; then
          func_fatal_error "cannot find name of link library for \`$lib'"
        fi
 
        # This library was specified with -dlopen.
        if test "$pass" = dlopen; then
          if test -z "$libdir"; then
            func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
          fi
          if test -z "$dlname" ||
             test "$dlopen_support" != yes ||
             test "$build_libtool_libs" = no; then
            # If there is no dlname, no dlopen support or we're linking
            # statically, we need to preload.  We also need to preload any
            # dependent libraries so libltdl's deplib preloader doesn't
            # bomb out in the load deplibs phase.
            dlprefiles="$dlprefiles $lib $dependency_libs"
          else
            newdlfiles="$newdlfiles $lib"
          fi
          continue
        fi # $pass = dlopen
 
        # We need an absolute path.
        case $ladir in
        [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
        *)
          abs_ladir=`cd "$ladir" && pwd`
          if test -z "$abs_ladir"; then
            func_warning "cannot determine absolute directory name of \`$ladir'"
            func_warning "passing it literally to the linker, although it might fail"
            abs_ladir="$ladir"
          fi
          ;;
        esac
        func_basename "$lib"
        laname="$func_basename_result"
 
        # Find the relevant object directory and library name.
        if test "X$installed" = Xyes; then
          if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
            func_warning "library \`$lib' was moved."
            dir="$ladir"
            absdir="$abs_ladir"
            libdir="$abs_ladir"
          else
            dir="$libdir"
            absdir="$libdir"
          fi
          test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
        else
          if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
            dir="$ladir"
            absdir="$abs_ladir"
            # Remove this search path later
            notinst_path="$notinst_path $abs_ladir"
          else
            dir="$ladir/$objdir"
            absdir="$abs_ladir/$objdir"
            # Remove this search path later
            notinst_path="$notinst_path $abs_ladir"
          fi
        fi # $installed = yes
        func_stripname 'lib' '.la' "$laname"
        name=$func_stripname_result
 
        # This library was specified with -dlpreopen.
        if test "$pass" = dlpreopen; then
          if test -z "$libdir" && test "$linkmode" = prog; then
            func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
          fi
          # Prefer using a static library (so that no silly _DYNAMIC symbols
          # are required to link).
          if test -n "$old_library"; then
            newdlprefiles="$newdlprefiles $dir/$old_library"
            # Keep a list of preopened convenience libraries to check
            # that they are being used correctly in the link pass.
            test -z "$libdir" && \
                dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
          # Otherwise, use the dlname, so that lt_dlopen finds it.
          elif test -n "$dlname"; then
            newdlprefiles="$newdlprefiles $dir/$dlname"
          else
            newdlprefiles="$newdlprefiles $dir/$linklib"
          fi
        fi # $pass = dlpreopen
 
        if test -z "$libdir"; then
          # Link the convenience library
          if test "$linkmode" = lib; then
            deplibs="$dir/$old_library $deplibs"
          elif test "$linkmode,$pass" = "prog,link"; then
            compile_deplibs="$dir/$old_library $compile_deplibs"
            finalize_deplibs="$dir/$old_library $finalize_deplibs"
          else
            deplibs="$lib $deplibs" # used for prog,scan pass
          fi
          continue
        fi
 
 
        if test "$linkmode" = prog && test "$pass" != link; then
          newlib_search_path="$newlib_search_path $ladir"
          deplibs="$lib $deplibs"
 
          linkalldeplibs=no
          if test "$link_all_deplibs" != no || test -z "$library_names" ||
             test "$build_libtool_libs" = no; then
            linkalldeplibs=yes
          fi
 
          tmp_libs=
          for deplib in $dependency_libs; do
            case $deplib in
            -L*) func_stripname '-L' '' "$deplib"
                 newlib_search_path="$newlib_search_path $func_stripname_result"
                 ;;
            esac
            # Need to link against all dependency_libs?
            if test "$linkalldeplibs" = yes; then
              deplibs="$deplib $deplibs"
            else
              # Need to hardcode shared library paths
              # or/and link against static libraries
              newdependency_libs="$deplib $newdependency_libs"
            fi
            if $opt_duplicate_deps ; then
              case "$tmp_libs " in
              *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
              esac
            fi
            tmp_libs="$tmp_libs $deplib"
          done # for deplib
          continue
        fi # $linkmode = prog...
 
        if test "$linkmode,$pass" = "prog,link"; then
          if test -n "$library_names" &&
             { { test "$prefer_static_libs" = no ||
                 test "$prefer_static_libs,$installed" = "built,yes"; } ||
               test -z "$old_library"; }; then
            # We need to hardcode the library path
            if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
              # Make sure the rpath contains only unique directories.
              case "$temp_rpath:" in
              *"$absdir:"*) ;;
              *) temp_rpath="$temp_rpath$absdir:" ;;
              esac
            fi
 
            # Hardcode the library path.
            # Skip directories that are in the system default run-time
            # search path.
            case " $sys_lib_dlsearch_path " in
            *" $absdir "*) ;;
            *)
              case "$compile_rpath " in
              *" $absdir "*) ;;
              *) compile_rpath="$compile_rpath $absdir"
              esac
              ;;
            esac
            case " $sys_lib_dlsearch_path " in
            *" $libdir "*) ;;
            *)
              case "$finalize_rpath " in
              *" $libdir "*) ;;
              *) finalize_rpath="$finalize_rpath $libdir"
              esac
              ;;
            esac
          fi # $linkmode,$pass = prog,link...
 
          if test "$alldeplibs" = yes &&
             { test "$deplibs_check_method" = pass_all ||
               { test "$build_libtool_libs" = yes &&
                 test -n "$library_names"; }; }; then
            # We only need to search for static libraries
            continue
          fi
        fi
 
        link_static=no # Whether the deplib will be linked statically
        use_static_libs=$prefer_static_libs
        if test "$use_static_libs" = built && test "$installed" = yes; then
          use_static_libs=no
        fi
        if test -n "$library_names" &&
           { test "$use_static_libs" = no || test -z "$old_library"; }; then
          case $host in
          *cygwin* | *mingw*)
              # No point in relinking DLLs because paths are not encoded
              notinst_deplibs="$notinst_deplibs $lib"
              need_relink=no
            ;;
          *)
            if test "$installed" = no; then
              notinst_deplibs="$notinst_deplibs $lib"
              need_relink=yes
            fi
            ;;
          esac
          # This is a shared library
 
          # Warn about portability, can't link against -module's on some
          # systems (darwin).  Don't bleat about dlopened modules though!
          dlopenmodule=""
          for dlpremoduletest in $dlprefiles; do
            if test "X$dlpremoduletest" = "X$lib"; then
              dlopenmodule="$dlpremoduletest"
              break
            fi
          done
          if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
            $ECHO
            if test "$linkmode" = prog; then
              $ECHO "*** Warning: Linking the executable $output against the loadable module"
            else
              $ECHO "*** Warning: Linking the shared library $output against the loadable module"
            fi
            $ECHO "*** $linklib is not portable!"
          fi
          if test "$linkmode" = lib &&
             test "$hardcode_into_libs" = yes; then
            # Hardcode the library path.
            # Skip directories that are in the system default run-time
            # search path.
            case " $sys_lib_dlsearch_path " in
            *" $absdir "*) ;;
            *)
              case "$compile_rpath " in
              *" $absdir "*) ;;
              *) compile_rpath="$compile_rpath $absdir"
              esac
              ;;
            esac
            case " $sys_lib_dlsearch_path " in
            *" $libdir "*) ;;
            *)
              case "$finalize_rpath " in
              *" $libdir "*) ;;
              *) finalize_rpath="$finalize_rpath $libdir"
              esac
              ;;
            esac
          fi
 
          if test -n "$old_archive_from_expsyms_cmds"; then
            # figure out the soname
            set dummy $library_names
            shift
            realname="$1"
            shift
            libname=`eval "\\$ECHO \"$libname_spec\""`
            # use dlname if we got it. it's perfectly good, no?
            if test -n "$dlname"; then
              soname="$dlname"
            elif test -n "$soname_spec"; then
              # bleh windows
              case $host in
              *cygwin* | mingw*)
                major=`expr $current - $age`
                versuffix="-$major"
                ;;
              esac
              eval soname=\"$soname_spec\"
            else
              soname="$realname"
            fi
 
            # Make a new name for the extract_expsyms_cmds to use
            soroot="$soname"
            func_basename "$soroot"
            soname="$func_basename_result"
            func_stripname 'lib' '.dll' "$soname"
            newlib=libimp-$func_stripname_result.a
 
            # If the library has no export list, then create one now
            if test -f "$output_objdir/$soname-def"; then :
            else
              func_echo "extracting exported symbol list from \`$soname'"
              func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
            fi
 
            # Create $newlib
            if test -f "$output_objdir/$newlib"; then :; else
              func_echo "generating import library for \`$soname'"
              func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
            fi
            # make sure the library variables are pointing to the new library
            dir=$output_objdir
            linklib=$newlib
          fi # test -n "$old_archive_from_expsyms_cmds"
 
          if test "$linkmode" = prog || test "$mode" != relink; then
            add_shlibpath=
            add_dir=
            add=
            lib_linked=yes
            case $hardcode_action in
            immediate | unsupported)
              if test "$hardcode_direct" = no; then
                add="$dir/$linklib"
                case $host in
                  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
                  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
                  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
                    *-*-unixware7*) add_dir="-L$dir" ;;
                  *-*-darwin* )
                    # if the lib is a (non-dlopened) module then we can not
                    # link against it, someone is ignoring the earlier warnings
                    if /usr/bin/file -L $add 2> /dev/null |
                         $GREP ": [^:]* bundle" >/dev/null ; then
                      if test "X$dlopenmodule" != "X$lib"; then
                        $ECHO "*** Warning: lib $linklib is a module, not a shared library"
                        if test -z "$old_library" ; then
                          $ECHO
                          $ECHO "*** And there doesn't seem to be a static archive available"
                          $ECHO "*** The link will probably fail, sorry"
                        else
                          add="$dir/$old_library"
                        fi
                      elif test -n "$old_library"; then
                        add="$dir/$old_library"
                      fi
                    fi
                esac
              elif test "$hardcode_minus_L" = no; then
                case $host in
                *-*-sunos*) add_shlibpath="$dir" ;;
                esac
                add_dir="-L$dir"
                add="-l$name"
              elif test "$hardcode_shlibpath_var" = no; then
                add_shlibpath="$dir"
                add="-l$name"
              else
                lib_linked=no
              fi
              ;;
            relink)
              if test "$hardcode_direct" = yes &&
                 test "$hardcode_direct_absolute" = no; then
                add="$dir/$linklib"
              elif test "$hardcode_minus_L" = yes; then
                add_dir="-L$dir"
                # Try looking first in the location we're being installed to.
                if test -n "$inst_prefix_dir"; then
                  case $libdir in
                    [\\/]*)
                      add_dir="$add_dir -L$inst_prefix_dir$libdir"
                      ;;
                  esac
                fi
                add="-l$name"
              elif test "$hardcode_shlibpath_var" = yes; then
                add_shlibpath="$dir"
                add="-l$name"
              else
                lib_linked=no
              fi
              ;;
            *) lib_linked=no ;;
            esac
 
            if test "$lib_linked" != yes; then
              func_fatal_configuration "unsupported hardcode properties"
            fi
 
            if test -n "$add_shlibpath"; then
              case :$compile_shlibpath: in
              *":$add_shlibpath:"*) ;;
              *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
              esac
            fi
            if test "$linkmode" = prog; then
              test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
              test -n "$add" && compile_deplibs="$add $compile_deplibs"
            else
              test -n "$add_dir" && deplibs="$add_dir $deplibs"
              test -n "$add" && deplibs="$add $deplibs"
              if test "$hardcode_direct" != yes &&
                 test "$hardcode_minus_L" != yes &&
                 test "$hardcode_shlibpath_var" = yes; then
                case :$finalize_shlibpath: in
                *":$libdir:"*) ;;
                *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
                esac
              fi
            fi
          fi
 
          if test "$linkmode" = prog || test "$mode" = relink; then
            add_shlibpath=
            add_dir=
            add=
            # Finalize command for both is simple: just hardcode it.
            if test "$hardcode_direct" = yes &&
               test "$hardcode_direct_absolute" = no; then
              add="$libdir/$linklib"
            elif test "$hardcode_minus_L" = yes; then
              add_dir="-L$libdir"
              add="-l$name"
            elif test "$hardcode_shlibpath_var" = yes; then
              case :$finalize_shlibpath: in
              *":$libdir:"*) ;;
              *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
              esac
              add="-l$name"
            elif test "$hardcode_automatic" = yes; then
              if test -n "$inst_prefix_dir" &&
                 test -f "$inst_prefix_dir$libdir/$linklib" ; then
                add="$inst_prefix_dir$libdir/$linklib"
              else
                add="$libdir/$linklib"
              fi
            else
              # We cannot seem to hardcode it, guess we'll fake it.
              add_dir="-L$libdir"
              # Try looking first in the location we're being installed to.
              if test -n "$inst_prefix_dir"; then
                case $libdir in
                  [\\/]*)
                    add_dir="$add_dir -L$inst_prefix_dir$libdir"
                    ;;
                esac
              fi
              add="-l$name"
            fi
 
            if test "$linkmode" = prog; then
              test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
              test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
            else
              test -n "$add_dir" && deplibs="$add_dir $deplibs"
              test -n "$add" && deplibs="$add $deplibs"
            fi
          fi
        elif test "$linkmode" = prog; then
          # Here we assume that one of hardcode_direct or hardcode_minus_L
          # is not unsupported.  This is valid on all known static and
          # shared platforms.
          if test "$hardcode_direct" != unsupported; then
            test -n "$old_library" && linklib="$old_library"
            compile_deplibs="$dir/$linklib $compile_deplibs"
            finalize_deplibs="$dir/$linklib $finalize_deplibs"
          else
            compile_deplibs="-l$name -L$dir $compile_deplibs"
            finalize_deplibs="-l$name -L$dir $finalize_deplibs"
          fi
        elif test "$build_libtool_libs" = yes; then
          # Not a shared library
          if test "$deplibs_check_method" != pass_all; then
            # We're trying link a shared library against a static one
            # but the system doesn't support it.
 
            # Just print a warning and add the library to dependency_libs so
            # that the program can be linked against the static library.
            $ECHO
            $ECHO "*** Warning: This system can not link to static lib archive $lib."
            $ECHO "*** I have the capability to make that library automatically link in when"
            $ECHO "*** you link to this library.  But I can only do this if you have a"
            $ECHO "*** shared version of the library, which you do not appear to have."
            if test "$module" = yes; then
              $ECHO "*** But as you try to build a module library, libtool will still create "
              $ECHO "*** a static module, that should work as long as the dlopening application"
              $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
              if test -z "$global_symbol_pipe"; then
                $ECHO
                $ECHO "*** However, this would only work if libtool was able to extract symbol"
                $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
                $ECHO "*** not find such a program.  So, this module is probably useless."
                $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
              fi
              if test "$build_old_libs" = no; then
                build_libtool_libs=module
                build_old_libs=yes
              else
                build_libtool_libs=no
              fi
            fi
          else
            deplibs="$dir/$old_library $deplibs"
            link_static=yes
          fi
        fi # link shared/static library?
 
        if test "$linkmode" = lib; then
          if test -n "$dependency_libs" &&
             { test "$hardcode_into_libs" != yes ||
               test "$build_old_libs" = yes ||
               test "$link_static" = yes; }; then
            # Extract -R from dependency_libs
            temp_deplibs=
            for libdir in $dependency_libs; do
              case $libdir in
              -R*) func_stripname '-R' '' "$libdir"
                   temp_xrpath=$func_stripname_result
                   case " $xrpath " in
                   *" $temp_xrpath "*) ;;
                   *) xrpath="$xrpath $temp_xrpath";;
                   esac;;
              *) temp_deplibs="$temp_deplibs $libdir";;
              esac
            done
            dependency_libs="$temp_deplibs"
          fi
 
          newlib_search_path="$newlib_search_path $absdir"
          # Link against this library
          test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
          # ... and its dependency_libs
          tmp_libs=
          for deplib in $dependency_libs; do
            newdependency_libs="$deplib $newdependency_libs"
            if $opt_duplicate_deps ; then
              case "$tmp_libs " in
              *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
              esac
            fi
            tmp_libs="$tmp_libs $deplib"
          done
 
          if test "$link_all_deplibs" != no; then
            # Add the search paths of all dependency libraries
            for deplib in $dependency_libs; do
              case $deplib in
              -L*) path="$deplib" ;;
              *.la)
                func_dirname "$deplib" "" "."
                dir="$func_dirname_result"
                # We need an absolute path.
                case $dir in
                [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
                *)
                  absdir=`cd "$dir" && pwd`
                  if test -z "$absdir"; then
                    func_warning "cannot determine absolute directory name of \`$dir'"
                    absdir="$dir"
                  fi
                  ;;
                esac
                if $GREP "^installed=no" $deplib > /dev/null; then
                case $host in
                *-*-darwin*)
                  depdepl=
                  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
                  if test -n "$deplibrary_names" ; then
                    for tmp in $deplibrary_names ; do
                      depdepl=$tmp
                    done
                    if test -f "$absdir/$objdir/$depdepl" ; then
                      depdepl="$absdir/$objdir/$depdepl"
                      darwin_install_name=`otool -L $depdepl | $SED -n -e '3q;2,2p' | $SED -e 's/(.*//'`
                      darwin_install_name=`$ECHO $darwin_install_name`
                      if test -z "$darwin_install_name"; then
                          darwin_install_name=`otool64 -L $depdepl | $SED -n -e '3q;2,2p' | $SED -e 's/(.*//'`
                          darwin_install_name=`$ECHO $darwin_install_name`
                      fi
                      compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
                      linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
                      path=
                    fi
                  fi
                  ;;
                *)
                  path="-L$absdir/$objdir"
                  ;;
                esac
                else
                  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
                  test -z "$libdir" && \
                    func_fatal_error "\`$deplib' is not a valid libtool archive"
                  test "$absdir" != "$libdir" && \
                    func_warning "\`$deplib' seems to be moved"
 
                  path="-L$absdir"
                fi
                ;;
              esac
              case " $deplibs " in
              *" $path "*) ;;
              *) deplibs="$path $deplibs" ;;
              esac
            done
          fi # link_all_deplibs != no
        fi # linkmode = lib
      done # for deplib in $libs
      dependency_libs="$newdependency_libs"
      if test "$pass" = dlpreopen; then
        # Link the dlpreopened libraries before other libraries
        for deplib in $save_deplibs; do
          deplibs="$deplib $deplibs"
        done
      fi
      if test "$pass" != dlopen; then
        if test "$pass" != conv; then
          # Make sure lib_search_path contains only unique directories.
          lib_search_path=
          for dir in $newlib_search_path; do
            case "$lib_search_path " in
            *" $dir "*) ;;
            *) lib_search_path="$lib_search_path $dir" ;;
            esac
          done
          newlib_search_path=
        fi
 
        if test "$linkmode,$pass" != "prog,link"; then
          vars="deplibs"
        else
          vars="compile_deplibs finalize_deplibs"
        fi
        for var in $vars dependency_libs; do
          # Add libraries to $var in reverse order
          eval tmp_libs=\"\$$var\"
          new_libs=
          for deplib in $tmp_libs; do
            # FIXME: Pedantically, this is the right thing to do, so
            #        that some nasty dependency loop isn't accidentally
            #        broken:
            #new_libs="$deplib $new_libs"
            # Pragmatically, this seems to cause very few problems in
            # practice:
            case $deplib in
            -L*) new_libs="$deplib $new_libs" ;;
            -R*) ;;
            *)
              # And here is the reason: when a library appears more
              # than once as an explicit dependence of a library, or
              # is implicitly linked in more than once by the
              # compiler, it is considered special, and multiple
              # occurrences thereof are not removed.  Compare this
              # with having the same library being listed as a
              # dependency of multiple other libraries: in this case,
              # we know (pedantically, we assume) the library does not
              # need to be listed more than once, so we keep only the
              # last copy.  This is not always right, but it is rare
              # enough that we require users that really mean to play
              # such unportable linking tricks to link the library
              # using -Wl,-lname, so that libtool does not consider it
              # for duplicate removal.
              case " $specialdeplibs " in
              *" $deplib "*) new_libs="$deplib $new_libs" ;;
              *)
                case " $new_libs " in
                *" $deplib "*) ;;
                *) new_libs="$deplib $new_libs" ;;
                esac
                ;;
              esac
              ;;
            esac
          done
          tmp_libs=
          for deplib in $new_libs; do
            case $deplib in
            -L*)
              case " $tmp_libs " in
              *" $deplib "*) ;;
              *) tmp_libs="$tmp_libs $deplib" ;;
              esac
              ;;
            *) tmp_libs="$tmp_libs $deplib" ;;
            esac
          done
          eval $var=\"$tmp_libs\"
        done # for var
      fi
      # Last step: remove runtime libs from dependency_libs
      # (they stay in deplibs)
      tmp_libs=
      for i in $dependency_libs ; do
        case " $predeps $postdeps $compiler_lib_search_path " in
        *" $i "*)
          i=""
          ;;
        esac
        if test -n "$i" ; then
          tmp_libs="$tmp_libs $i"
        fi
      done
      dependency_libs=$tmp_libs
    done # for pass
    if test "$linkmode" = prog; then
      dlfiles="$newdlfiles"
    fi
    if test "$linkmode" = prog || test "$linkmode" = lib; then
      dlprefiles="$newdlprefiles"
    fi
 
    case $linkmode in
    oldlib)
      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
        func_warning "\`-dlopen' is ignored for archives"
      fi
 
      test -n "$deplibs" && \
        func_warning "\`-l' and \`-L' are ignored for archives"
 
 
      test -n "$rpath" && \
        func_warning "\`-rpath' is ignored for archives"
 
      test -n "$xrpath" && \
        func_warning "\`-R' is ignored for archives"
 
      test -n "$vinfo" && \
        func_warning "\`-version-info/-version-number' is ignored for archives"
 
      test -n "$release" && \
        func_warning "\`-release' is ignored for archives"
 
      test -n "$export_symbols$export_symbols_regex" && \
        func_warning "\`-export-symbols' is ignored for archives"
 
      # Now set the variables for building old libraries.
      build_libtool_libs=no
      oldlibs="$output"
      objs="$objs$old_deplibs"
      ;;
 
    lib)
      # Make sure we only generate libraries of the form `libNAME.la'.
      case $outputname in
      lib*)
        func_stripname 'lib' '.la' "$outputname"
        name=$func_stripname_result
        eval shared_ext=\"$shrext_cmds\"
        eval libname=\"$libname_spec\"
        ;;
      *)
        test "$module" = no && \
          func_fatal_help "libtool library \`$output' must begin with \`lib'"
 
        if test "$need_lib_prefix" != no; then
          # Add the "lib" prefix for modules if required
          func_stripname '' '.la' "$outputname"
          name=$func_stripname_result
          eval shared_ext=\"$shrext_cmds\"
          eval libname=\"$libname_spec\"
        else
          func_stripname '' '.la' "$outputname"
          libname=$func_stripname_result
        fi
        ;;
      esac
 
      if test -n "$objs"; then
        if test "$deplibs_check_method" != pass_all; then
          func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
        else
          $ECHO
          $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
          $ECHO "*** objects $objs is not portable!"
          libobjs="$libobjs $objs"
        fi
      fi
 
      test "$dlself" != no && \
        func_warning "\`-dlopen self' is ignored for libtool libraries"
 
      set dummy $rpath
      shift
      test "$#" -gt 1 && \
        func_warning "ignoring multiple \`-rpath's for a libtool library"
 
      install_libdir="$1"
 
      oldlibs=
      if test -z "$rpath"; then
        if test "$build_libtool_libs" = yes; then
          # Building a libtool convenience library.
          # Some compilers have problems with a `.al' extension so
          # convenience libraries should have the same extension an
          # archive normally would.
          oldlibs="$output_objdir/$libname.$libext $oldlibs"
          build_libtool_libs=convenience
          build_old_libs=yes
        fi
 
        test -n "$vinfo" && \
          func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
 
        test -n "$release" && \
          func_warning "\`-release' is ignored for convenience libraries"
      else
 
        # Parse the version information argument.
        save_ifs="$IFS"; IFS=':'
        set dummy $vinfo 0 0 0
        shift
        IFS="$save_ifs"
 
        test -n "$7" && \
          func_fatal_help "too many parameters to \`-version-info'"
 
        # convert absolute version numbers to libtool ages
        # this retains compatibility with .la files and attempts
        # to make the code below a bit more comprehensible
 
        case $vinfo_number in
        yes)
          number_major="$1"
          number_minor="$2"
          number_revision="$3"
          #
          # There are really only two kinds -- those that
          # use the current revision as the major version
          # and those that subtract age and use age as
          # a minor version.  But, then there is irix
          # which has an extra 1 added just for fun
          #
          case $version_type in
          darwin|linux|osf|windows|none)
            current=`expr $number_major + $number_minor`
            age="$number_minor"
            revision="$number_revision"
            ;;
          freebsd-aout|freebsd-elf|sunos)
            current="$number_major"
            revision="$number_minor"
            age="0"
            ;;
          irix|nonstopux)
            current=`expr $number_major + $number_minor - 1`
            age="$number_minor"
            revision="$number_minor"
            ;;
          esac
          ;;
        no)
          current="$1"
          revision="$2"
          age="$3"
          ;;
        esac
 
        # Check that each of the things are valid numbers.
        case $current in
        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
        *)
          func_error "CURRENT \`$current' must be a nonnegative integer"
          func_fatal_error "\`$vinfo' is not valid version information"
          ;;
        esac
 
        case $revision in
        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
        *)
          func_error "REVISION \`$revision' must be a nonnegative integer"
          func_fatal_error "\`$vinfo' is not valid version information"
          ;;
        esac
 
        case $age in
        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
        *)
          func_error "AGE \`$age' must be a nonnegative integer"
          func_fatal_error "\`$vinfo' is not valid version information"
          ;;
        esac
 
        if test "$age" -gt "$current"; then
          func_error "AGE \`$age' is greater than the current interface number \`$current'"
          func_fatal_error "\`$vinfo' is not valid version information"
        fi
 
        # Calculate the version variables.
        major=
        versuffix=
        verstring=
        case $version_type in
        none) ;;
 
        darwin)
          # Like Linux, but with the current version available in
          # verstring for coding it into the library header
          major=.`expr $current - $age`
          versuffix="$major.$age.$revision"
          # Darwin ld doesn't like 0 for these options...
          minor_current=`expr $current + 1`
          verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
          ;;
 
        freebsd-aout)
          major=".$current"
          versuffix=".$current.$revision";
          ;;
 
        freebsd-elf)
          major=".$current"
          versuffix=".$current"
          ;;
 
        irix | nonstopux)
          major=`expr $current - $age + 1`
 
          case $version_type in
            nonstopux) verstring_prefix=nonstopux ;;
            *)         verstring_prefix=sgi ;;
          esac
          verstring="$verstring_prefix$major.$revision"
 
          # Add in all the interfaces that we are compatible with.
          loop=$revision
          while test "$loop" -ne 0; do
            iface=`expr $revision - $loop`
            loop=`expr $loop - 1`
            verstring="$verstring_prefix$major.$iface:$verstring"
          done
 
          # Before this point, $major must not contain `.'.
          major=.$major
          versuffix="$major.$revision"
          ;;
 
        linux)
          major=.`expr $current - $age`
          versuffix="$major.$age.$revision"
          ;;
 
        osf)
          major=.`expr $current - $age`
          versuffix=".$current.$age.$revision"
          verstring="$current.$age.$revision"
 
          # Add in all the interfaces that we are compatible with.
          loop=$age
          while test "$loop" -ne 0; do
            iface=`expr $current - $loop`
            loop=`expr $loop - 1`
            verstring="$verstring:${iface}.0"
          done
 
          # Make executables depend on our current version.
          verstring="$verstring:${current}.0"
          ;;
 
        qnx)
          major=".$current"
          versuffix=".$current"
          ;;
 
        sunos)
          major=".$current"
          versuffix=".$current.$revision"
          ;;
 
        windows)
          # Use '-' rather than '.', since we only want one
          # extension on DOS 8.3 filesystems.
          major=`expr $current - $age`
          versuffix="-$major"
          ;;
 
        *)
          func_fatal_configuration "unknown library version type \`$version_type'"
          ;;
        esac
 
        # Clear the version info if we defaulted, and they specified a release.
        if test -z "$vinfo" && test -n "$release"; then
          major=
          case $version_type in
          darwin)
            # we can't check for "0.0" in archive_cmds due to quoting
            # problems, so we reset it completely
            verstring=
            ;;
          *)
            verstring="0.0"
            ;;
          esac
          if test "$need_version" = no; then
            versuffix=
          else
            versuffix=".0.0"
          fi
        fi
 
        # Remove version info from name if versioning should be avoided
        if test "$avoid_version" = yes && test "$need_version" = no; then
          major=
          versuffix=
          verstring=""
        fi
 
        # Check to see if the archive will have undefined symbols.
        if test "$allow_undefined" = yes; then
          if test "$allow_undefined_flag" = unsupported; then
            func_warning "undefined symbols not allowed in $host shared libraries"
            build_libtool_libs=no
            build_old_libs=yes
          fi
        else
          # Don't allow undefined symbols.
          allow_undefined_flag="$no_undefined_flag"
        fi
 
      fi
 
      func_generate_dlsyms "$libname" "$libname" "yes"
      libobjs="$libobjs $symfileobj"
      test "X$libobjs" = "X " && libobjs=
 
      if test "$mode" != relink; then
        # Remove our outputs, but don't remove object files since they
        # may have been created when compiling PIC objects.
        removelist=
        tempremovelist=`$ECHO "$output_objdir/*"`
        for p in $tempremovelist; do
          case $p in
            *.$objext)
               ;;
            $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
               if test "X$precious_files_regex" != "X"; then
                 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
                 then
                   continue
                 fi
               fi
               removelist="$removelist $p"
               ;;
            *) ;;
          esac
        done
        test -n "$removelist" && \
          func_show_eval "${RM}r \$removelist"
      fi
 
      # Now set the variables for building old libraries.
      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
        oldlibs="$oldlibs $output_objdir/$libname.$libext"
 
        # Transform .lo files to .o files.
        oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
      fi
 
      # Eliminate all temporary directories.
      #for path in $notinst_path; do
      # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
      # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
      # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
      #done
 
      if test -n "$xrpath"; then
        # If the user specified any rpath flags, then add them.
        temp_xrpath=
        for libdir in $xrpath; do
          temp_xrpath="$temp_xrpath -R$libdir"
          case "$finalize_rpath " in
          *" $libdir "*) ;;
          *) finalize_rpath="$finalize_rpath $libdir" ;;
          esac
        done
        if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
          dependency_libs="$temp_xrpath $dependency_libs"
        fi
      fi
 
      # Make sure dlfiles contains only unique files that won't be dlpreopened
      old_dlfiles="$dlfiles"
      dlfiles=
      for lib in $old_dlfiles; do
        case " $dlprefiles $dlfiles " in
        *" $lib "*) ;;
        *) dlfiles="$dlfiles $lib" ;;
        esac
      done
 
      # Make sure dlprefiles contains only unique files
      old_dlprefiles="$dlprefiles"
      dlprefiles=
      for lib in $old_dlprefiles; do
        case "$dlprefiles " in
        *" $lib "*) ;;
        *) dlprefiles="$dlprefiles $lib" ;;
        esac
      done
 
      if test "$build_libtool_libs" = yes; then
        if test -n "$rpath"; then
          case $host in
          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
            # these systems don't actually have a c library (as such)!
            ;;
          *-*-rhapsody* | *-*-darwin1.[012])
            # Rhapsody C library is in the System framework
            deplibs="$deplibs System.ltframework"
            ;;
          *-*-netbsd*)
            # Don't link with libc until the a.out ld.so is fixed.
            ;;
          *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
            # Do not include libc due to us having libc/libc_r.
            ;;
          *-*-sco3.2v5* | *-*-sco5v6*)
            # Causes problems with __ctype
            ;;
          *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
            # Compiler inserts libc in the correct place for threads to work
            ;;
          *)
            # Add libc to deplibs on all other systems if necessary.
            if test "$build_libtool_need_lc" = "yes"; then
              deplibs="$deplibs -lc"
            fi
            ;;
          esac
        fi
 
        # Transform deplibs into only deplibs that can be linked in shared.
        name_save=$name
        libname_save=$libname
        release_save=$release
        versuffix_save=$versuffix
        major_save=$major
        # I'm not sure if I'm treating the release correctly.  I think
        # release should show up in the -l (ie -lgmp5) so we don't want to
        # add it in twice.  Is that correct?
        release=""
        versuffix=""
        major=""
        newdeplibs=
        droppeddeps=no
        case $deplibs_check_method in
        pass_all)
          # Don't check for shared/static.  Everything works.
          # This might be a little naive.  We might want to check
          # whether the library exists or not.  But this is on
          # osf3 & osf4 and I'm not really sure... Just
          # implementing what was already the behavior.
          newdeplibs=$deplibs
          ;;
        test_compile)
          # This code stresses the "libraries are programs" paradigm to its
          # limits. Maybe even breaks it.  We compile a program, linking it
          # against the deplibs as a proxy for the library.  Then we can check
          # whether they linked in statically or dynamically with ldd.
          $opt_dry_run || $RM conftest.c
          cat > conftest.c <<EOF
          int main() { return 0; }
EOF
          $opt_dry_run || $RM conftest
          if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
            ldd_output=`ldd conftest`
            for i in $deplibs; do
              name=`expr $i : '-l\(.*\)'`
              # If $name is empty we are operating on a -L argument.
              if test "$name" != "" && test "$name" != "0"; then
                if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                  case " $predeps $postdeps " in
                  *" $i "*)
                    newdeplibs="$newdeplibs $i"
                    i=""
                    ;;
                  esac
                fi
                if test -n "$i" ; then
                  libname=`eval "\\$ECHO \"$libname_spec\""`
                  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
                  set dummy $deplib_matches; shift
                  deplib_match=$1
                  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
                    newdeplibs="$newdeplibs $i"
                  else
                    droppeddeps=yes
                    $ECHO
                    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
                    $ECHO "*** I have the capability to make that library automatically link in when"
                    $ECHO "*** you link to this library.  But I can only do this if you have a"
                    $ECHO "*** shared version of the library, which I believe you do not have"
                    $ECHO "*** because a test_compile did reveal that the linker did not use it for"
                    $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
                  fi
                fi
              else
                newdeplibs="$newdeplibs $i"
              fi
            done
          else
            # Error occurred in the first compile.  Let's try to salvage
            # the situation: Compile a separate program for each library.
            for i in $deplibs; do
              name=`expr $i : '-l\(.*\)'`
              # If $name is empty we are operating on a -L argument.
              if test "$name" != "" && test "$name" != "0"; then
                $opt_dry_run || $RM conftest
                if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
                  ldd_output=`ldd conftest`
                  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                    case " $predeps $postdeps " in
                    *" $i "*)
                      newdeplibs="$newdeplibs $i"
                      i=""
                      ;;
                    esac
                  fi
                  if test -n "$i" ; then
                    libname=`eval "\\$ECHO \"$libname_spec\""`
                    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
                    set dummy $deplib_matches; shift
                    deplib_match=$1
                    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
                      newdeplibs="$newdeplibs $i"
                    else
                      droppeddeps=yes
                      $ECHO
                      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
                      $ECHO "*** I have the capability to make that library automatically link in when"
                      $ECHO "*** you link to this library.  But I can only do this if you have a"
                      $ECHO "*** shared version of the library, which you do not appear to have"
                      $ECHO "*** because a test_compile did reveal that the linker did not use this one"
                      $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
                    fi
                  fi
                else
                  droppeddeps=yes
                  $ECHO
                  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
                  $ECHO "*** make it link in!  You will probably need to install it or some"
                  $ECHO "*** library that it depends on before this library will be fully"
                  $ECHO "*** functional.  Installing it before continuing would be even better."
                fi
              else
                newdeplibs="$newdeplibs $i"
              fi
            done
          fi
          ;;
        file_magic*)
          set dummy $deplibs_check_method; shift
          file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
          for a_deplib in $deplibs; do
            name=`expr $a_deplib : '-l\(.*\)'`
            # If $name is empty we are operating on a -L argument.
            if test "$name" != "" && test  "$name" != "0"; then
              if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                case " $predeps $postdeps " in
                *" $a_deplib "*)
                  newdeplibs="$newdeplibs $a_deplib"
                  a_deplib=""
                  ;;
                esac
              fi
              if test -n "$a_deplib" ; then
                libname=`eval "\\$ECHO \"$libname_spec\""`
                for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
                  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
                  for potent_lib in $potential_libs; do
                      # Follow soft links.
                      if ls -lLd "$potent_lib" 2>/dev/null |
                         $GREP " -> " >/dev/null; then
                        continue
                      fi
                      # The statement above tries to avoid entering an
                      # endless loop below, in case of cyclic links.
                      # We might still enter an endless loop, since a link
                      # loop can be closed while we follow links,
                      # but so what?
                      potlib="$potent_lib"
                      while test -h "$potlib" 2>/dev/null; do
                        potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
                        case $potliblink in
                        [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
                        *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
                        esac
                      done
                      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
                         $SED -e 10q |
                         $EGREP "$file_magic_regex" > /dev/null; then
                        newdeplibs="$newdeplibs $a_deplib"
                        a_deplib=""
                        break 2
                      fi
                  done
                done
              fi
              if test -n "$a_deplib" ; then
                droppeddeps=yes
                $ECHO
                $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
                $ECHO "*** I have the capability to make that library automatically link in when"
                $ECHO "*** you link to this library.  But I can only do this if you have a"
                $ECHO "*** shared version of the library, which you do not appear to have"
                $ECHO "*** because I did check the linker path looking for a file starting"
                if test -z "$potlib" ; then
                  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
                else
                  $ECHO "*** with $libname and none of the candidates passed a file format test"
                  $ECHO "*** using a file magic. Last file checked: $potlib"
                fi
              fi
            else
              # Add a -L argument.
              newdeplibs="$newdeplibs $a_deplib"
            fi
          done # Gone through all deplibs.
          ;;
        match_pattern*)
          set dummy $deplibs_check_method; shift
          match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
          for a_deplib in $deplibs; do
            name=`expr $a_deplib : '-l\(.*\)'`
            # If $name is empty we are operating on a -L argument.
            if test -n "$name" && test "$name" != "0"; then
              if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                case " $predeps $postdeps " in
                *" $a_deplib "*)
                  newdeplibs="$newdeplibs $a_deplib"
                  a_deplib=""
                  ;;
                esac
              fi
              if test -n "$a_deplib" ; then
                libname=`eval "\\$ECHO \"$libname_spec\""`
                for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
                  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
                  for potent_lib in $potential_libs; do
                    potlib="$potent_lib" # see symlink-check above in file_magic test
                    if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
                       $EGREP "$match_pattern_regex" > /dev/null; then
                      newdeplibs="$newdeplibs $a_deplib"
                      a_deplib=""
                      break 2
                    fi
                  done
                done
              fi
              if test -n "$a_deplib" ; then
                droppeddeps=yes
                $ECHO
                $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
                $ECHO "*** I have the capability to make that library automatically link in when"
                $ECHO "*** you link to this library.  But I can only do this if you have a"
                $ECHO "*** shared version of the library, which you do not appear to have"
                $ECHO "*** because I did check the linker path looking for a file starting"
                if test -z "$potlib" ; then
                  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
                else
                  $ECHO "*** with $libname and none of the candidates passed a file format test"
                  $ECHO "*** using a regex pattern. Last file checked: $potlib"
                fi
              fi
            else
              # Add a -L argument.
              newdeplibs="$newdeplibs $a_deplib"
            fi
          done # Gone through all deplibs.
          ;;
        none | unknown | *)
          newdeplibs=""
          tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
              -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
          if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
            for i in $predeps $postdeps ; do
              # can't use Xsed below, because $i might contain '/'
              tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
            done
          fi
          if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[     ]//g' |
             $GREP . >/dev/null; then
            $ECHO
            if test "X$deplibs_check_method" = "Xnone"; then
              $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
            else
              $ECHO "*** Warning: inter-library dependencies are not known to be supported."
            fi
            $ECHO "*** All declared inter-library dependencies are being dropped."
            droppeddeps=yes
          fi
          ;;
        esac
        versuffix=$versuffix_save
        major=$major_save
        release=$release_save
        libname=$libname_save
        name=$name_save
 
        case $host in
        *-*-rhapsody* | *-*-darwin1.[012])
          # On Rhapsody replace the C library with the System framework
          newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
          ;;
        esac
 
        if test "$droppeddeps" = yes; then
          if test "$module" = yes; then
            $ECHO
            $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
            $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
            $ECHO "*** a static module, that should work as long as the dlopening"
            $ECHO "*** application is linked with the -dlopen flag."
            if test -z "$global_symbol_pipe"; then
              $ECHO
              $ECHO "*** However, this would only work if libtool was able to extract symbol"
              $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
              $ECHO "*** not find such a program.  So, this module is probably useless."
              $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
            fi
            if test "$build_old_libs" = no; then
              oldlibs="$output_objdir/$libname.$libext"
              build_libtool_libs=module
              build_old_libs=yes
            else
              build_libtool_libs=no
            fi
          else
            $ECHO "*** The inter-library dependencies that have been dropped here will be"
            $ECHO "*** automatically added whenever a program is linked with this library"
            $ECHO "*** or is declared to -dlopen it."
 
            if test "$allow_undefined" = no; then
              $ECHO
              $ECHO "*** Since this library must not contain undefined symbols,"
              $ECHO "*** because either the platform does not support them or"
              $ECHO "*** it was explicitly requested with -no-undefined,"
              $ECHO "*** libtool will only create a static version of it."
              if test "$build_old_libs" = no; then
                oldlibs="$output_objdir/$libname.$libext"
                build_libtool_libs=module
                build_old_libs=yes
              else
                build_libtool_libs=no
              fi
            fi
          fi
        fi
        # Done checking deplibs!
        deplibs=$newdeplibs
      fi
      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
      case $host in
        *-*-darwin*)
          newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
          new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
          deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
          ;;
      esac
 
      # move library search paths that coincide with paths to not yet
      # installed libraries to the beginning of the library search list
      new_libs=
      for path in $notinst_path; do
        case " $new_libs " in
        *" -L$path/$objdir "*) ;;
        *)
          case " $deplibs " in
          *" -L$path/$objdir "*)
            new_libs="$new_libs -L$path/$objdir" ;;
          esac
          ;;
        esac
      done
      for deplib in $deplibs; do
        case $deplib in
        -L*)
          case " $new_libs " in
          *" $deplib "*) ;;
          *) new_libs="$new_libs $deplib" ;;
          esac
          ;;
        *) new_libs="$new_libs $deplib" ;;
        esac
      done
      deplibs="$new_libs"
 
      # All the library-specific variables (install_libdir is set above).
      library_names=
      old_library=
      dlname=
 
      # Test again, we may have decided not to build it any more
      if test "$build_libtool_libs" = yes; then
        if test "$hardcode_into_libs" = yes; then
          # Hardcode the library paths
          hardcode_libdirs=
          dep_rpath=
          rpath="$finalize_rpath"
          test "$mode" != relink && rpath="$compile_rpath$rpath"
          for libdir in $rpath; do
            if test -n "$hardcode_libdir_flag_spec"; then
              if test -n "$hardcode_libdir_separator"; then
                if test -z "$hardcode_libdirs"; then
                  hardcode_libdirs="$libdir"
                else
                  # Just accumulate the unique libdirs.
                  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
                  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
                    ;;
                  *)
                    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
                    ;;
                  esac
                fi
              else
                eval flag=\"$hardcode_libdir_flag_spec\"
                dep_rpath="$dep_rpath $flag"
              fi
            elif test -n "$runpath_var"; then
              case "$perm_rpath " in
              *" $libdir "*) ;;
              *) perm_rpath="$perm_rpath $libdir" ;;
              esac
            fi
          done
          # Substitute the hardcoded libdirs into the rpath.
          if test -n "$hardcode_libdir_separator" &&
             test -n "$hardcode_libdirs"; then
            libdir="$hardcode_libdirs"
            if test -n "$hardcode_libdir_flag_spec_ld"; then
              eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
            else
              eval dep_rpath=\"$hardcode_libdir_flag_spec\"
            fi
          fi
          if test -n "$runpath_var" && test -n "$perm_rpath"; then
            # We should set the runpath_var.
            rpath=
            for dir in $perm_rpath; do
              rpath="$rpath$dir:"
            done
            eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
          fi
          test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
        fi
 
        shlibpath="$finalize_shlibpath"
        test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
        if test -n "$shlibpath"; then
          eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
        fi
 
        # Get the real and link names of the library.
        eval shared_ext=\"$shrext_cmds\"
        eval library_names=\"$library_names_spec\"
        set dummy $library_names
        shift
        realname="$1"
        shift
 
        if test -n "$soname_spec"; then
          eval soname=\"$soname_spec\"
        else
          soname="$realname"
        fi
        if test -z "$dlname"; then
          dlname=$soname
        fi
 
        lib="$output_objdir/$realname"
        linknames=
        for link
        do
          linknames="$linknames $link"
        done
 
        # Use standard objects if they are pic
        test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
        test "X$libobjs" = "X " && libobjs=
 
        delfiles=
        if test -n "$export_symbols" && test -n "$include_expsyms"; then
          $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
          export_symbols="$output_objdir/$libname.uexp"
          delfiles="$delfiles $export_symbols"
        fi
 
        orig_export_symbols=
        case $host_os in
        cygwin* | mingw*)
          if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
            # exporting using user supplied symfile
            if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
              # and it's NOT already a .def file. Must figure out
              # which of the given symbols are data symbols and tag
              # them as such. So, trigger use of export_symbols_cmds.
              # export_symbols gets reassigned inside the "prepare
              # the list of exported symbols" if statement, so the
              # include_expsyms logic still works.
              orig_export_symbols="$export_symbols"
              export_symbols=
              always_export_symbols=yes
            fi
          fi
          ;;
        esac
 
        # Prepare the list of exported symbols
        if test -z "$export_symbols"; then
          if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
            func_echo "generating symbol list for \`$libname.la'"
            export_symbols="$output_objdir/$libname.exp"
            $opt_dry_run || $RM $export_symbols
            cmds=$export_symbols_cmds
            save_ifs="$IFS"; IFS='~'
            for cmd in $cmds; do
              IFS="$save_ifs"
              eval cmd=\"$cmd\"
              if len=`expr "X$cmd" : ".*"` &&
               test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
                func_show_eval "$cmd" 'exit $?'
                skipped_export=false
              else
                # The command line is too long to execute in one step.
                func_echo "using reloadable object file for export list..."
                skipped_export=:
                # Break out early, otherwise skipped_export may be
                # set to false by a later but shorter cmd.
                break
              fi
            done
            IFS="$save_ifs"
            if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
              func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
              func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
            fi
          fi
        fi
 
        if test -n "$export_symbols" && test -n "$include_expsyms"; then
          tmp_export_symbols="$export_symbols"
          test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
          $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
        fi
 
        if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
          # The given exports_symbols file has to be filtered, so filter it.
          func_echo "filter symbol list for \`$libname.la' to tag DATA exports"
          # FIXME: $output_objdir/$libname.filter potentially contains lots of
          # 's' commands which not all seds can handle. GNU sed should be fine
          # though. Also, the filter scales superlinearly with the number of
          # global variables. join(1) would be nice here, but unfortunately
          # isn't a blessed tool.
          $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
          delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
          export_symbols=$output_objdir/$libname.def
          $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
        fi
 
        tmp_deplibs=
        for test_deplib in $deplibs; do
          case " $convenience " in
          *" $test_deplib "*) ;;
          *)
            tmp_deplibs="$tmp_deplibs $test_deplib"
            ;;
          esac
        done
        deplibs="$tmp_deplibs"
 
        if test -n "$convenience"; then
          if test -n "$whole_archive_flag_spec" &&
            test "$compiler_needs_object" = yes &&
            test -z "$libobjs"; then
            # extract the archives, so we have objects to list.
            # TODO: could optimize this to just extract one archive.
            whole_archive_flag_spec=
          fi
          if test -n "$whole_archive_flag_spec"; then
            save_libobjs=$libobjs
            eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
            test "X$libobjs" = "X " && libobjs=
          else
            gentop="$output_objdir/${outputname}x"
            generated="$generated $gentop"
 
            func_extract_archives $gentop $convenience
            libobjs="$libobjs $func_extract_archives_result"
            test "X$libobjs" = "X " && libobjs=
          fi
        fi
 
        if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
          eval flag=\"$thread_safe_flag_spec\"
          linker_flags="$linker_flags $flag"
        fi
 
        # Make a backup of the uninstalled library when relinking
        if test "$mode" = relink; then
          $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
        fi
 
        # Do each of the archive commands.
        if test "$module" = yes && test -n "$module_cmds" ; then
          if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
            eval test_cmds=\"$module_expsym_cmds\"
            cmds=$module_expsym_cmds
          else
            eval test_cmds=\"$module_cmds\"
            cmds=$module_cmds
          fi
        else
          if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
            eval test_cmds=\"$archive_expsym_cmds\"
            cmds=$archive_expsym_cmds
          else
            eval test_cmds=\"$archive_cmds\"
            cmds=$archive_cmds
          fi
        fi
 
        if test "X$skipped_export" != "X:" &&
           len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
           test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
          :
        else
          # The command line is too long to link in one step, link piecewise
          # or, if using GNU ld and skipped_export is not :, use a linker
          # script.
 
          # Save the value of $output and $libobjs because we want to
          # use them later.  If we have whole_archive_flag_spec, we
          # want to use save_libobjs as it was before
          # whole_archive_flag_spec was expanded, because we can't
          # assume the linker understands whole_archive_flag_spec.
          # This may have to be revisited, in case too many
          # convenience libraries get linked in and end up exceeding
          # the spec.
          if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
            save_libobjs=$libobjs
          fi
          save_output=$output
          output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
 
          # Clear the reloadable object creation command queue and
          # initialize k to one.
          test_cmds=
          concat_cmds=
          objlist=
          last_robj=
          k=1
 
          if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
            output=${output_objdir}/${output_la}.lnkscript
            func_echo "creating GNU ld script: $output"
            $ECHO 'INPUT (' > $output
            for obj in $save_libobjs
            do
              $ECHO "$obj" >> $output
            done
            $ECHO ')' >> $output
            delfiles="$delfiles $output"
          elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
            output=${output_objdir}/${output_la}.lnk
            func_echo "creating linker input file list: $output"
            : > $output
            set x $save_libobjs
            shift
            firstobj=
            if test "$compiler_needs_object" = yes; then
              firstobj="$1 "
              shift
            fi
            for obj
            do
              $ECHO "$obj" >> $output
            done
            delfiles="$delfiles $output"
            output=$firstobj\"$file_list_spec$output\"
          else
            if test -n "$save_libobjs"; then
              func_echo "creating reloadable object files..."
              output=$output_objdir/$output_la-${k}.$objext
              # Loop over the list of objects to be linked.
              for obj in $save_libobjs
              do
                eval test_cmds=\"$reload_cmds $objlist $last_robj\"
                if test "X$objlist" = X ||
                   { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
                     test "$len" -le "$max_cmd_len"; }; then
                  objlist="$objlist $obj"
                else
                  # The command $test_cmds is almost too long, add a
                  # command to the queue.
                  if test "$k" -eq 1 ; then
                    # The first file doesn't have a previous command to add.
                    eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
                  else
                    # All subsequent reloadable object files will link in
                    # the last one created.
                    eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
                  fi
                  last_robj=$output_objdir/$output_la-${k}.$objext
                  k=`expr $k + 1`
                  output=$output_objdir/$output_la-${k}.$objext
                  objlist=$obj
                  len=1
                fi
              done
              # Handle the remaining objects by creating one last
              # reloadable object file.  All subsequent reloadable object
              # files will link in the last one created.
              test -z "$concat_cmds" || concat_cmds=$concat_cmds~
              eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
 
              # Set up a command to remove the reloadable object files
              # after they are used.
              i=0
              while test "$i" -lt "$k"
              do
                i=`expr $i + 1`
                delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
              done
            else
              output=
            fi
 
            if ${skipped_export-false}; then
              func_echo "generating symbol list for \`$libname.la'"
              export_symbols="$output_objdir/$libname.exp"
              $opt_dry_run || $RM $export_symbols
              libobjs=$output
              # Append the command to create the export file.
              test -z "$concat_cmds" || concat_cmds=$concat_cmds~
              eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
            fi
 
            test -n "$save_libobjs" &&
              func_echo "creating a temporary reloadable object file: $output"
 
            # Loop through the commands generated above and execute them.
            save_ifs="$IFS"; IFS='~'
            for cmd in $concat_cmds; do
              IFS="$save_ifs"
              $opt_silent || {
                  func_quote_for_expand "$cmd"
                  eval "func_echo $func_quote_for_expand_result"
              }
              $opt_dry_run || eval "$cmd" || {
                lt_exit=$?
 
                # Restore the uninstalled library and exit
                if test "$mode" = relink; then
                  ( cd "$output_objdir" && \
                    $RM "${realname}T" && \
                    $MV "${realname}U" "$realname" )
                fi
 
                exit $lt_exit
              }
            done
            IFS="$save_ifs"
 
            if test -n "$export_symbols_regex" && ${skipped_export-false}; then
              func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
              func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
            fi
          fi
 
          if ${skipped_export-false}; then
            if test -n "$export_symbols" && test -n "$include_expsyms"; then
              tmp_export_symbols="$export_symbols"
              test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
              $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
            fi
 
            if test -n "$orig_export_symbols"; then
              # The given exports_symbols file has to be filtered, so filter it.
              func_echo "filter symbol list for \`$libname.la' to tag DATA exports"
              # FIXME: $output_objdir/$libname.filter potentially contains lots of
              # 's' commands which not all seds can handle. GNU sed should be fine
              # though. Also, the filter scales superlinearly with the number of
              # global variables. join(1) would be nice here, but unfortunately
              # isn't a blessed tool.
              $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
              delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
              export_symbols=$output_objdir/$libname.def
              $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
            fi
          fi
 
          libobjs=$output
          # Restore the value of output.
          output=$save_output
 
          if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
            eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
            test "X$libobjs" = "X " && libobjs=
          fi
          # Expand the library linking commands again to reset the
          # value of $libobjs for piecewise linking.
 
          # Do each of the archive commands.
          if test "$module" = yes && test -n "$module_cmds" ; then
            if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
              cmds=$module_expsym_cmds
            else
              cmds=$module_cmds
            fi
          else
            if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
              cmds=$archive_expsym_cmds
            else
              cmds=$archive_cmds
            fi
          fi
        fi
 
        if test -n "$delfiles"; then
          # Append the command to remove temporary files to $cmds.
          eval cmds=\"\$cmds~\$RM $delfiles\"
        fi
 
        # Add any objects from preloaded convenience libraries
        if test -n "$dlprefiles"; then
          gentop="$output_objdir/${outputname}x"
          generated="$generated $gentop"
 
          func_extract_archives $gentop $dlprefiles
          libobjs="$libobjs $func_extract_archives_result"
          test "X$libobjs" = "X " && libobjs=
        fi
 
        save_ifs="$IFS"; IFS='~'
        for cmd in $cmds; do
          IFS="$save_ifs"
          eval cmd=\"$cmd\"
          $opt_silent || {
            func_quote_for_expand "$cmd"
            eval "func_echo $func_quote_for_expand_result"
          }
          $opt_dry_run || eval "$cmd" || {
            lt_exit=$?
 
            # Restore the uninstalled library and exit
            if test "$mode" = relink; then
              ( cd "$output_objdir" && \
                $RM "${realname}T" && \
                $MV "${realname}U" "$realname" )
            fi
 
            exit $lt_exit
          }
        done
        IFS="$save_ifs"
 
        # Restore the uninstalled library and exit
        if test "$mode" = relink; then
          $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
 
          if test -n "$convenience"; then
            if test -z "$whole_archive_flag_spec"; then
              func_show_eval '${RM}r "$gentop"'
            fi
          fi
 
          exit $EXIT_SUCCESS
        fi
 
        # Create links to the real library.
        for linkname in $linknames; do
          if test "$realname" != "$linkname"; then
            func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
          fi
        done
 
        # If -module or -export-dynamic was specified, set the dlname.
        if test "$module" = yes || test "$export_dynamic" = yes; then
          # On all known operating systems, these are identical.
          dlname="$soname"
        fi
      fi
      ;;
 
    obj)
      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
        func_warning "\`-dlopen' is ignored for objects"
      fi
 
      test -n "$deplibs" && \
        func_warning "\`-l' and \`-L' are ignored for objects"
 
      test -n "$rpath" && \
        func_warning "\`-rpath' is ignored for objects"
 
      test -n "$xrpath" && \
        func_warning "\`-R' is ignored for objects"
 
      test -n "$vinfo" && \
        func_warning "\`-version-info' is ignored for objects"
 
      test -n "$release" && \
        func_warning "\`-release' is ignored for objects"
 
      case $output in
      *.lo)
        test -n "$objs$old_deplibs" && \
          func_fatal_error "cannot build library object \`$output' from non-libtool objects"
 
        libobj=$output
        func_lo2o "$libobj"
        obj=$func_lo2o_result
        ;;
      *)
        libobj=
        obj="$output"
        ;;
      esac
 
      # Delete the old objects.
      $opt_dry_run || $RM $obj $libobj
 
      # Objects from convenience libraries.  This assumes
      # single-version convenience libraries.  Whenever we create
      # different ones for PIC/non-PIC, this we'll have to duplicate
      # the extraction.
      reload_conv_objs=
      gentop=
      # reload_cmds runs $LD directly, so let us get rid of
      # -Wl from whole_archive_flag_spec and hope we can get by with
      # turning comma into space..
      wl=
 
      if test -n "$convenience"; then
        if test -n "$whole_archive_flag_spec"; then
          eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
          reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
        else
          gentop="$output_objdir/${obj}x"
          generated="$generated $gentop"
 
          func_extract_archives $gentop $convenience
          reload_conv_objs="$reload_objs $func_extract_archives_result"
        fi
      fi
 
      # Create the old-style object.
      reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
 
      output="$obj"
      func_execute_cmds "$reload_cmds" 'exit $?'
 
      # Exit if we aren't doing a library object file.
      if test -z "$libobj"; then
        if test -n "$gentop"; then
          func_show_eval '${RM}r "$gentop"'
        fi
 
        exit $EXIT_SUCCESS
      fi
 
      if test "$build_libtool_libs" != yes; then
        if test -n "$gentop"; then
          func_show_eval '${RM}r "$gentop"'
        fi
 
        # Create an invalid libtool object if no PIC, so that we don't
        # accidentally link it into a program.
        # $show "echo timestamp > $libobj"
        # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
        exit $EXIT_SUCCESS
      fi
 
      if test -n "$pic_flag" || test "$pic_mode" != default; then
        # Only do commands if we really have different PIC objects.
        reload_objs="$libobjs $reload_conv_objs"
        output="$libobj"
        func_execute_cmds "$reload_cmds" 'exit $?'
      fi
 
      if test -n "$gentop"; then
        func_show_eval '${RM}r "$gentop"'
      fi
 
      exit $EXIT_SUCCESS
      ;;
 
    prog)
      case $host in
        *cygwin*) func_stripname '' '.exe' "$output"
                  output=$func_stripname_result.exe;;
      esac
      test -n "$vinfo" && \
        func_warning "\`-version-info' is ignored for programs"
 
      test -n "$release" && \
        func_warning "\`-release' is ignored for programs"
 
      test "$preload" = yes \
        && test "$dlopen_support" = unknown \
        && test "$dlopen_self" = unknown \
        && test "$dlopen_self_static" = unknown && \
          func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
 
      case $host in
      *-*-rhapsody* | *-*-darwin1.[012])
        # On Rhapsody replace the C library is the System framework
        compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
        finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
        ;;
      esac
 
      case $host in
      *-*-darwin*)
        # Don't allow lazy linking, it breaks C++ global constructors
        # But is supposedly fixed on 10.4 or later (yay!).
        if test "$tagname" = CXX ; then
          case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
            10.[0123])
              compile_command="$compile_command ${wl}-bind_at_load"
              finalize_command="$finalize_command ${wl}-bind_at_load"
            ;;
          esac
        fi
        # Time to change all our "foo.ltframework" stuff back to "-framework foo"
        compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
        finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
        ;;
      esac
 
 
      # move library search paths that coincide with paths to not yet
      # installed libraries to the beginning of the library search list
      new_libs=
      for path in $notinst_path; do
        case " $new_libs " in
        *" -L$path/$objdir "*) ;;
        *)
          case " $compile_deplibs " in
          *" -L$path/$objdir "*)
            new_libs="$new_libs -L$path/$objdir" ;;
          esac
          ;;
        esac
      done
      for deplib in $compile_deplibs; do
        case $deplib in
        -L*)
          case " $new_libs " in
          *" $deplib "*) ;;
          *) new_libs="$new_libs $deplib" ;;
          esac
          ;;
        *) new_libs="$new_libs $deplib" ;;
        esac
      done
      compile_deplibs="$new_libs"
 
 
      compile_command="$compile_command $compile_deplibs"
      finalize_command="$finalize_command $finalize_deplibs"
 
      if test -n "$rpath$xrpath"; then
        # If the user specified any rpath flags, then add them.
        for libdir in $rpath $xrpath; do
          # This is the magic to use -rpath.
          case "$finalize_rpath " in
          *" $libdir "*) ;;
          *) finalize_rpath="$finalize_rpath $libdir" ;;
          esac
        done
      fi
 
      # Now hardcode the library paths
      rpath=
      hardcode_libdirs=
      for libdir in $compile_rpath $finalize_rpath; do
        if test -n "$hardcode_libdir_flag_spec"; then
          if test -n "$hardcode_libdir_separator"; then
            if test -z "$hardcode_libdirs"; then
              hardcode_libdirs="$libdir"
            else
              # Just accumulate the unique libdirs.
              case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
              *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
                ;;
              *)
                hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
                ;;
              esac
            fi
          else
            eval flag=\"$hardcode_libdir_flag_spec\"
            rpath="$rpath $flag"
          fi
        elif test -n "$runpath_var"; then
          case "$perm_rpath " in
          *" $libdir "*) ;;
          *) perm_rpath="$perm_rpath $libdir" ;;
          esac
        fi
        case $host in
        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
          testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
          case :$dllsearchpath: in
          *":$libdir:"*) ;;
          *) dllsearchpath="$dllsearchpath:$libdir";;
          esac
          case :$dllsearchpath: in
          *":$testbindir:"*) ;;
          *) dllsearchpath="$dllsearchpath:$testbindir";;
          esac
          ;;
        esac
      done
      # Substitute the hardcoded libdirs into the rpath.
      if test -n "$hardcode_libdir_separator" &&
         test -n "$hardcode_libdirs"; then
        libdir="$hardcode_libdirs"
        eval rpath=\" $hardcode_libdir_flag_spec\"
      fi
      compile_rpath="$rpath"
 
      rpath=
      hardcode_libdirs=
      for libdir in $finalize_rpath; do
        if test -n "$hardcode_libdir_flag_spec"; then
          if test -n "$hardcode_libdir_separator"; then
            if test -z "$hardcode_libdirs"; then
              hardcode_libdirs="$libdir"
            else
              # Just accumulate the unique libdirs.
              case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
              *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
                ;;
              *)
                hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
                ;;
              esac
            fi
          else
            eval flag=\"$hardcode_libdir_flag_spec\"
            rpath="$rpath $flag"
          fi
        elif test -n "$runpath_var"; then
          case "$finalize_perm_rpath " in
          *" $libdir "*) ;;
          *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
          esac
        fi
      done
      # Substitute the hardcoded libdirs into the rpath.
      if test -n "$hardcode_libdir_separator" &&
         test -n "$hardcode_libdirs"; then
        libdir="$hardcode_libdirs"
        eval rpath=\" $hardcode_libdir_flag_spec\"
      fi
      finalize_rpath="$rpath"
 
      if test -n "$libobjs" && test "$build_old_libs" = yes; then
        # Transform all the library objects into standard objects.
        compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
        finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
      fi
 
      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
 
      # template prelinking step
      if test -n "$prelink_cmds"; then
        func_execute_cmds "$prelink_cmds" 'exit $?'
      fi
 
      wrappers_required=yes
      case $host in
      *cygwin* | *mingw* )
        if test "$build_libtool_libs" != yes; then
          wrappers_required=no
        fi
        ;;
      *)
        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
          wrappers_required=no
        fi
        ;;
      esac
      if test "$wrappers_required" = no; then
        # Replace the output file specification.
        compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
        link_command="$compile_command$compile_rpath"
 
        # We have no uninstalled library dependencies, so finalize right now.
        exit_status=0
        func_show_eval "$link_command" 'exit_status=$?'
 
        # Delete the generated files.
        if test -f "$output_objdir/${outputname}S.${objext}"; then
          func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
        fi
 
        exit $exit_status
      fi
 
      if test -n "$compile_shlibpath$finalize_shlibpath"; then
        compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
      fi
      if test -n "$finalize_shlibpath"; then
        finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
      fi
 
      compile_var=
      finalize_var=
      if test -n "$runpath_var"; then
        if test -n "$perm_rpath"; then
          # We should set the runpath_var.
          rpath=
          for dir in $perm_rpath; do
            rpath="$rpath$dir:"
          done
          compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
        fi
        if test -n "$finalize_perm_rpath"; then
          # We should set the runpath_var.
          rpath=
          for dir in $finalize_perm_rpath; do
            rpath="$rpath$dir:"
          done
          finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
        fi
      fi
 
      if test "$no_install" = yes; then
        # We don't need to create a wrapper script.
        link_command="$compile_var$compile_command$compile_rpath"
        # Replace the output file specification.
        link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
        # Delete the old output file.
        $opt_dry_run || $RM $output
        # Link the executable and exit
        func_show_eval "$link_command" 'exit $?'
        exit $EXIT_SUCCESS
      fi
 
      if test "$hardcode_action" = relink; then
        # Fast installation is not supported
        link_command="$compile_var$compile_command$compile_rpath"
        relink_command="$finalize_var$finalize_command$finalize_rpath"
 
        func_warning "this platform does not like uninstalled shared libraries"
        func_warning "\`$output' will be relinked during installation"
      else
        if test "$fast_install" != no; then
          link_command="$finalize_var$compile_command$finalize_rpath"
          if test "$fast_install" = yes; then
            relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
          else
            # fast_install is set to needless
            relink_command=
          fi
        else
          link_command="$compile_var$compile_command$compile_rpath"
          relink_command="$finalize_var$finalize_command$finalize_rpath"
        fi
      fi
 
      # Replace the output file specification.
      link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
 
      # Delete the old output files.
      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
 
      func_show_eval "$link_command" 'exit $?'
 
      # Now create the wrapper script.
      func_echo "creating $output"
 
      # Quote the relink command for shipping.
      if test -n "$relink_command"; then
        # Preserve any variables that may affect compiler behavior
        for var in $variables_saved_for_relink; do
          if eval test -z \"\${$var+set}\"; then
            relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
          elif eval var_value=\$$var; test -z "$var_value"; then
            relink_command="$var=; export $var; $relink_command"
          else
            func_quote_for_eval "$var_value"
            relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
          fi
        done
        relink_command="(cd `pwd`; $relink_command)"
        relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
      fi
 
      # Quote $ECHO for shipping.
      if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
        case $progpath in
        [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
        *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
        esac
        qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
      else
        qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
      fi
 
      # Only actually do things if not in dry run mode.
      $opt_dry_run || {
        # win32 will think the script is a binary if it has
        # a .exe suffix, so we strip it off here.
        case $output in
          *.exe) func_stripname '' '.exe' "$output"
                 output=$func_stripname_result ;;
        esac
        # test for cygwin because mv fails w/o .exe extensions
        case $host in
          *cygwin*)
            exeext=.exe
            func_stripname '' '.exe' "$outputname"
            outputname=$func_stripname_result ;;
          *) exeext= ;;
        esac
        case $host in
          *cygwin* | *mingw* )
            output_name=`basename $output`
            output_path=`dirname $output`
            cwrappersource="$output_path/$objdir/lt-$output_name.c"
            cwrapper="$output_path/$output_name.exe"
            $RM $cwrappersource $cwrapper
            trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
 
            cat > $cwrappersource <<EOF
 
/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
 
   The $output program cannot be directly executed until all the libtool
   libraries that it depends on are installed.
 
   This wrapper executable should never be moved out of the build directory.
   If it is, it will not operate correctly.
 
   Currently, it simply execs the wrapper *script* "/bin/sh $output",
   but could eventually absorb all of the scripts functionality and
   exec $objdir/$outputname directly.
*/
EOF
            cat >> $cwrappersource<<"EOF"
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <malloc.h>
#include <stdarg.h>
#include <assert.h>
#include <string.h>
#include <ctype.h>
#include <sys/stat.h>
 
#if defined(PATH_MAX)
# define LT_PATHMAX PATH_MAX
#elif defined(MAXPATHLEN)
# define LT_PATHMAX MAXPATHLEN
#else
# define LT_PATHMAX 1024
#endif
 
#ifndef DIR_SEPARATOR
# define DIR_SEPARATOR '/'
# define PATH_SEPARATOR ':'
#endif
 
#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
  defined (__OS2__)
# define HAVE_DOS_BASED_FILE_SYSTEM
# ifndef DIR_SEPARATOR_2
#  define DIR_SEPARATOR_2 '\\'
# endif
# ifndef PATH_SEPARATOR_2
#  define PATH_SEPARATOR_2 ';'
# endif
#endif
 
#ifndef DIR_SEPARATOR_2
# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
#else /* DIR_SEPARATOR_2 */
# define IS_DIR_SEPARATOR(ch) \
        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
#endif /* DIR_SEPARATOR_2 */
 
#ifndef PATH_SEPARATOR_2
# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
#else /* PATH_SEPARATOR_2 */
# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
#endif /* PATH_SEPARATOR_2 */
 
#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
#define XFREE(stale) do { \
  if (stale) { free ((void *) stale); stale = 0; } \
} while (0)
 
/* -DDEBUG is fairly common in CFLAGS.  */
#undef DEBUG
#if defined DEBUGWRAPPER
# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
#else
# define DEBUG(format, ...)
#endif
 
const char *program_name = NULL;
 
void * xmalloc (size_t num);
char * xstrdup (const char *string);
const char * base_name (const char *name);
char * find_executable(const char *wrapper);
int    check_executable(const char *path);
char * strendzap(char *str, const char *pat);
void lt_fatal (const char *message, ...);
 
int
main (int argc, char *argv[])
{
  char **newargz;
  int i;
 
  program_name = (char *) xstrdup (base_name (argv[0]));
  DEBUG("(main) argv[0]      : %s\n",argv[0]);
  DEBUG("(main) program_name : %s\n",program_name);
  newargz = XMALLOC(char *, argc+2);
EOF
 
            cat >> $cwrappersource <<EOF
  newargz[0] = (char *) xstrdup("$SHELL");
EOF
 
            cat >> $cwrappersource <<"EOF"
  newargz[1] = find_executable(argv[0]);
  if (newargz[1] == NULL)
    lt_fatal("Couldn't find %s", argv[0]);
  DEBUG("(main) found exe at : %s\n",newargz[1]);
  /* we know the script has the same name, without the .exe */
  /* so make sure newargz[1] doesn't end in .exe */
  strendzap(newargz[1],".exe");
  for (i = 1; i < argc; i++)
    newargz[i+1] = xstrdup(argv[i]);
  newargz[argc+1] = NULL;
 
  for (i=0; i<argc+1; i++)
  {
    DEBUG("(main) newargz[%d]   : %s\n",i,newargz[i]);
    ;
  }
 
EOF
 
            case $host_os in
              mingw*)
                cat >> $cwrappersource <<EOF
  execv("$SHELL",(char const **)newargz);
EOF
              ;;
              *)
                cat >> $cwrappersource <<EOF
  execv("$SHELL",newargz);
EOF
              ;;
            esac
 
            cat >> $cwrappersource <<"EOF"
  return 127;
}
 
void *
xmalloc (size_t num)
{
  void * p = (void *) malloc (num);
  if (!p)
    lt_fatal ("Memory exhausted");
 
  return p;
}
 
char *
xstrdup (const char *string)
{
  return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
;
}
 
const char *
base_name (const char *name)
{
  const char *base;
 
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
  /* Skip over the disk name in MSDOS pathnames. */
  if (isalpha ((unsigned char)name[0]) && name[1] == ':')
    name += 2;
#endif
 
  for (base = name; *name; name++)
    if (IS_DIR_SEPARATOR (*name))
      base = name + 1;
  return base;
}
 
int
check_executable(const char * path)
{
  struct stat st;
 
  DEBUG("(check_executable)  : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
  if ((!path) || (!*path))
    return 0;
 
  if ((stat (path, &st) >= 0) &&
      (
        /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
#if defined (S_IXOTH)
       ((st.st_mode & S_IXOTH) == S_IXOTH) ||
#endif
#if defined (S_IXGRP)
       ((st.st_mode & S_IXGRP) == S_IXGRP) ||
#endif
       ((st.st_mode & S_IXUSR) == S_IXUSR))
      )
    return 1;
  else
    return 0;
}
 
/* Searches for the full path of the wrapper.  Returns
   newly allocated full path name if found, NULL otherwise */
char *
find_executable (const char* wrapper)
{
  int has_slash = 0;
  const char* p;
  const char* p_next;
  /* static buffer for getcwd */
  char tmp[LT_PATHMAX + 1];
  int tmp_len;
  char* concat_name;
 
  DEBUG("(find_executable)  : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
 
  if ((wrapper == NULL) || (*wrapper == '\0'))
    return NULL;
 
  /* Absolute path? */
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
  if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
  {
    concat_name = xstrdup (wrapper);
    if (check_executable(concat_name))
      return concat_name;
    XFREE(concat_name);
  }
  else
  {
#endif
    if (IS_DIR_SEPARATOR (wrapper[0]))
    {
      concat_name = xstrdup (wrapper);
      if (check_executable(concat_name))
        return concat_name;
      XFREE(concat_name);
    }
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
  }
#endif
 
  for (p = wrapper; *p; p++)
    if (*p == '/')
    {
      has_slash = 1;
      break;
    }
  if (!has_slash)
  {
    /* no slashes; search PATH */
    const char* path = getenv ("PATH");
    if (path != NULL)
    {
      for (p = path; *p; p = p_next)
      {
        const char* q;
        size_t p_len;
        for (q = p; *q; q++)
          if (IS_PATH_SEPARATOR(*q))
            break;
        p_len = q - p;
        p_next = (*q == '\0' ? q : q + 1);
        if (p_len == 0)
        {
          /* empty path: current directory */
          if (getcwd (tmp, LT_PATHMAX) == NULL)
            lt_fatal ("getcwd failed");
          tmp_len = strlen(tmp);
          concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
          memcpy (concat_name, tmp, tmp_len);
          concat_name[tmp_len] = '/';
          strcpy (concat_name + tmp_len + 1, wrapper);
        }
        else
        {
          concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
          memcpy (concat_name, p, p_len);
          concat_name[p_len] = '/';
          strcpy (concat_name + p_len + 1, wrapper);
        }
        if (check_executable(concat_name))
          return concat_name;
        XFREE(concat_name);
      }
    }
    /* not found in PATH; assume curdir */
  }
  /* Relative path | not found in path: prepend cwd */
  if (getcwd (tmp, LT_PATHMAX) == NULL)
    lt_fatal ("getcwd failed");
  tmp_len = strlen(tmp);
  concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
  memcpy (concat_name, tmp, tmp_len);
  concat_name[tmp_len] = '/';
  strcpy (concat_name + tmp_len + 1, wrapper);
 
  if (check_executable(concat_name))
    return concat_name;
  XFREE(concat_name);
  return NULL;
}
 
char *
strendzap(char *str, const char *pat)
{
  size_t len, patlen;
 
  assert(str != NULL);
  assert(pat != NULL);
 
  len = strlen(str);
  patlen = strlen(pat);
 
  if (patlen <= len)
  {
    str += len - patlen;
    if (strcmp(str, pat) == 0)
      *str = '\0';
  }
  return str;
}
 
static void
lt_error_core (int exit_status, const char * mode,
          const char * message, va_list ap)
{
  fprintf (stderr, "%s: %s: ", program_name, mode);
  vfprintf (stderr, message, ap);
  fprintf (stderr, ".\n");
 
  if (exit_status >= 0)
    exit (exit_status);
}
 
void
lt_fatal (const char *message, ...)
{
  va_list ap;
  va_start (ap, message);
  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
  va_end (ap);
}
EOF
          # we should really use a build-platform specific compiler
          # here, but OTOH, the wrappers (shell script and this C one)
          # are only useful if you want to execute the "real" binary.
          # Since the "real" binary is built for $host, then this
          # wrapper might as well be built for $host, too.
          $opt_dry_run || $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
          ;;
        esac
        $RM $output
        trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
 
        $ECHO > $output "\
#! $SHELL
 
# $output - temporary wrapper script for $objdir/$outputname
# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
#
# The $output program cannot be directly executed until all the libtool
# libraries that it depends on are installed.
#
# This wrapper script should never be moved out of the build directory.
# If it is, it will not operate correctly.
 
# Sed substitution that helps us do robust quoting.  It backslashifies
# metacharacters that are still active within double-quoted strings.
Xsed='${SED} -e 1s/^X//'
sed_quote_subst='$sed_quote_subst'
 
# Be Bourne compatible
if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
  emulate sh
  NULLCMD=:
  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
  # is contrary to our usage.  Disable this feature.
  alias -g '\${1+\"\$@\"}'='\"\$@\"'
  setopt NO_GLOB_SUBST
else
  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
fi
BIN_SH=xpg4; export BIN_SH # for Tru64
DUALCASE=1; export DUALCASE # for MKS sh
 
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
relink_command=\"$relink_command\"
 
# This environment variable determines our operation mode.
if test \"\$libtool_install_magic\" = \"$magic\"; then
  # install mode needs the following variables:
  generated_by_libtool_version='$macro_version'
  notinst_deplibs='$notinst_deplibs'
else
  # When we are sourced in execute mode, \$file and \$ECHO are already set.
  if test \"\$libtool_execute_magic\" != \"$magic\"; then
    ECHO=\"$qecho\"
    file=\"\$0\"
    # Make sure echo works.
    if test \"X\$1\" = X--no-reexec; then
      # Discard the --no-reexec flag, and continue.
      shift
    elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
      # Yippee, \$ECHO works!
      :
    else
      # Restart under the correct shell, and then maybe \$ECHO will work.
      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
    fi
  fi\
"
        $ECHO >> $output "\
 
  # Find the directory that this script lives in.
  thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
 
  # Follow symbolic links until we get to the real thisdir.
  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
  while test -n \"\$file\"; do
    destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
 
    # If there was a directory component, then change thisdir.
    if test \"x\$destdir\" != \"x\$file\"; then
      case \"\$destdir\" in
      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
      *) thisdir=\"\$thisdir/\$destdir\" ;;
      esac
    fi
 
    file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
  done
 
  # Try to get the absolute directory name.
  absdir=\`cd \"\$thisdir\" && pwd\`
  test -n \"\$absdir\" && thisdir=\"\$absdir\"
"
 
        if test "$fast_install" = yes; then
          $ECHO >> $output "\
  program=lt-'$outputname'$exeext
  progdir=\"\$thisdir/$objdir\"
 
  if test ! -f \"\$progdir/\$program\" ||
     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
 
    file=\"\$\$-\$program\"
 
    if test ! -d \"\$progdir\"; then
      $MKDIR \"\$progdir\"
    else
      $RM \"\$progdir/\$file\"
    fi"
 
          $ECHO >> $output "\
 
    # relink executable if necessary
    if test -n \"\$relink_command\"; then
      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
      else
        $ECHO \"\$relink_command_output\" >&2
        $RM \"\$progdir/\$file\"
        exit 1
      fi
    fi
 
    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
    { $RM \"\$progdir/\$program\";
      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
    $RM \"\$progdir/\$file\"
  fi"
        else
          $ECHO >> $output "\
  program='$outputname'
  progdir=\"\$thisdir/$objdir\"
"
        fi
 
        $ECHO >> $output "\
 
  if test -f \"\$progdir/\$program\"; then"
 
        # Export our shlibpath_var if we have one.
        if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
          $ECHO >> $output "\
    # Add our own library path to $shlibpath_var
    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
 
    # Some systems cannot cope with colon-terminated $shlibpath_var
    # The second colon is a workaround for a bug in BeOS R4 sed
    $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
 
    export $shlibpath_var
"
        fi
 
        # fixup the dll searchpath if we need to.
        if test -n "$dllsearchpath"; then
          $ECHO >> $output "\
    # Add the dll search path components to the executable PATH
    PATH=$dllsearchpath:\$PATH
"
        fi
 
        $ECHO >> $output "\
    if test \"\$libtool_execute_magic\" != \"$magic\"; then
      # Run the actual program with our arguments.
"
        case $host in
        # Backslashes separate directories on plain windows
        *-*-mingw | *-*-os2*)
          $ECHO >> $output "\
      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
"
          ;;
 
        *)
          $ECHO >> $output "\
      exec \"\$progdir/\$program\" \${1+\"\$@\"}
"
          ;;
        esac
        $ECHO >> $output "\
      \$ECHO \"\$0: cannot exec \$program \$*\"
      exit 1
    fi
  else
    # The program doesn't exist.
    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
    $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
    exit 1
  fi
fi\
"
        chmod +x $output
      }
      exit $EXIT_SUCCESS
      ;;
    esac
 
    # See if we need to build an old-fashioned archive.
    for oldlib in $oldlibs; do
 
      if test "$build_libtool_libs" = convenience; then
        oldobjs="$libobjs_save $symfileobj"
        addlibs="$convenience"
        build_libtool_libs=no
      else
        if test "$build_libtool_libs" = module; then
          oldobjs="$libobjs_save"
          build_libtool_libs=no
        else
          oldobjs="$old_deplibs $non_pic_objects"
          if test "$preload" = yes && test -f "$symfileobj"; then
            oldobjs="$oldobjs $symfileobj"
          fi
        fi
        addlibs="$old_convenience"
      fi
 
      if test -n "$addlibs"; then
        gentop="$output_objdir/${outputname}x"
        generated="$generated $gentop"
 
        func_extract_archives $gentop $addlibs
        oldobjs="$oldobjs $func_extract_archives_result"
      fi
 
      # Do each command in the archive commands.
      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
        cmds=$old_archive_from_new_cmds
      else
 
        # Add any objects from preloaded convenience libraries
        if test -n "$dlprefiles"; then
          gentop="$output_objdir/${outputname}x"
          generated="$generated $gentop"
 
          func_extract_archives $gentop $dlprefiles
          oldobjs="$oldobjs $func_extract_archives_result"
        fi
 
        # POSIX demands no paths to be encoded in archives.  We have
        # to avoid creating archives with duplicate basenames if we
        # might have to extract them afterwards, e.g., when creating a
        # static archive out of a convenience library, or when linking
        # the entirety of a libtool archive into another (currently
        # not supported by libtool).
        if (for obj in $oldobjs
            do
              func_basename "$obj"
              $ECHO "$func_basename_result"
            done | sort | sort -uc >/dev/null 2>&1); then
          :
        else
          $ECHO "copying selected object files to avoid basename conflicts..."
          gentop="$output_objdir/${outputname}x"
          generated="$generated $gentop"
          func_mkdir_p "$gentop"
          save_oldobjs=$oldobjs
          oldobjs=
          counter=1
          for obj in $save_oldobjs
          do
            func_basename "$obj"
            objbase="$func_basename_result"
            case " $oldobjs " in
            " ") oldobjs=$obj ;;
            *[\ /]"$objbase "*)
              while :; do
                # Make sure we don't pick an alternate name that also
                # overlaps.
                newobj=lt$counter-$objbase
                counter=`expr $counter + 1`
                case " $oldobjs " in
                *[\ /]"$newobj "*) ;;
                *) if test ! -f "$gentop/$newobj"; then break; fi ;;
                esac
              done
              func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
              oldobjs="$oldobjs $gentop/$newobj"
              ;;
            *) oldobjs="$oldobjs $obj" ;;
            esac
          done
        fi
        eval cmds=\"$old_archive_cmds\"
 
        if len=`expr "X$cmds" : ".*" 2>/dev/null` &&
           test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
          cmds=$old_archive_cmds
        else
          # the command line is too long to link in one step, link in parts
          func_echo "using piecewise archive linking..."
          save_RANLIB=$RANLIB
          RANLIB=:
          objlist=
          concat_cmds=
          save_oldobjs=$oldobjs
          # Is there a better way of finding the last object in the list?
          for obj in $save_oldobjs
          do
            last_oldobj=$obj
          done
          for obj in $save_oldobjs
          do
            oldobjs="$objlist $obj"
            objlist="$objlist $obj"
            eval test_cmds=\"$old_archive_cmds\"
            if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
               test "$len" -le "$max_cmd_len"; then
              :
            else
              # the above command should be used before it gets too long
              oldobjs=$objlist
              if test "$obj" = "$last_oldobj" ; then
                RANLIB=$save_RANLIB
              fi
              test -z "$concat_cmds" || concat_cmds=$concat_cmds~
              eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
              objlist=
            fi
          done
          RANLIB=$save_RANLIB
          oldobjs=$objlist
          if test "X$oldobjs" = "X" ; then
            eval cmds=\"\$concat_cmds\"
          else
            eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
          fi
        fi
      fi
      func_execute_cmds "$cmds" 'exit $?'
    done
 
    test -n "$generated" && \
      func_show_eval "${RM}r$generated"
 
    # Now create the libtool archive.
    case $output in
    *.la)
      old_library=
      test "$build_old_libs" = yes && old_library="$libname.$libext"
      func_echo "creating $output"
 
      # Preserve any variables that may affect compiler behavior
      for var in $variables_saved_for_relink; do
        if eval test -z \"\${$var+set}\"; then
          relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
        elif eval var_value=\$$var; test -z "$var_value"; then
          relink_command="$var=; export $var; $relink_command"
        else
          func_quote_for_eval "$var_value"
          relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
        fi
      done
      # Quote the link command for shipping.
      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
      relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
      if test "$hardcode_automatic" = yes ; then
        relink_command=
      fi
 
      # Only create the output if not a dry run.
      $opt_dry_run || {
        for installed in no yes; do
          if test "$installed" = yes; then
            if test -z "$install_libdir"; then
              break
            fi
            output="$output_objdir/$outputname"i
            # Replace all uninstalled libtool libraries with the installed ones
            newdependency_libs=
            for deplib in $dependency_libs; do
              case $deplib in
              *.la)
                func_basename "$deplib"
                name="$func_basename_result"
                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
                test -z "$libdir" && \
                  func_fatal_error "\`$deplib' is not a valid libtool archive"
                newdependency_libs="$newdependency_libs $libdir/$name"
                ;;
              *) newdependency_libs="$newdependency_libs $deplib" ;;
              esac
            done
            dependency_libs="$newdependency_libs"
            newdlfiles=
 
            for lib in $dlfiles; do
              case $lib in
              *.la)
                func_basename "$lib"
                name="$func_basename_result"
                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
                test -z "$libdir" && \
                  func_fatal_error "\`$lib' is not a valid libtool archive"
                newdlfiles="$newdlfiles $libdir/$name"
                ;;
              *) newdlfiles="$newdlfiles $lib" ;;
              esac
            done
            dlfiles="$newdlfiles"
            newdlprefiles=
            for lib in $dlprefiles; do
              case $lib in
              *.la)
                # Only pass preopened files to the pseudo-archive (for
                # eventual linking with the app. that links it) if we
                # didn't already link the preopened objects directly into
                # the library:
                func_basename "$lib"
                name="$func_basename_result"
                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
                test -z "$libdir" && \
                  func_fatal_error "\`$lib' is not a valid libtool archive"
                newdlprefiles="$newdlprefiles $libdir/$name"
                ;;
              esac
            done
            dlprefiles="$newdlprefiles"
          else
            newdlfiles=
            for lib in $dlfiles; do
              case $lib in
                [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
                *) abs=`pwd`"/$lib" ;;
              esac
              newdlfiles="$newdlfiles $abs"
            done
            dlfiles="$newdlfiles"
            newdlprefiles=
            for lib in $dlprefiles; do
              case $lib in
                [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
                *) abs=`pwd`"/$lib" ;;
              esac
              newdlprefiles="$newdlprefiles $abs"
            done
            dlprefiles="$newdlprefiles"
          fi
          $RM $output
          # place dlname in correct position for cygwin
          tdlname=$dlname
          case $host,$output,$installed,$module,$dlname in
            *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
          esac
          $ECHO > $output "\
# $outputname - a libtool library file
# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
 
# The name that we can dlopen(3).
dlname='$tdlname'
 
# Names of this library.
library_names='$library_names'
 
# The name of the static archive.
old_library='$old_library'
 
# Linker flags that can not go in dependency_libs.
inherited_linker_flags='$new_inherited_linker_flags'
 
# Libraries that this one depends upon.
dependency_libs='$dependency_libs'
 
# Names of additional weak libraries provided by this library
weak_library_names='$weak_libs'
 
# Version information for $libname.
current=$current
age=$age
revision=$revision
 
# Is this an already installed library?
installed=$installed
 
# Should we warn about portability when linking against -modules?
shouldnotlink=$module
 
# Files to dlopen/dlpreopen
dlopen='$dlfiles'
dlpreopen='$dlprefiles'
 
# Directory that this library needs to be installed in:
libdir='$install_libdir'"
          if test "$installed" = no && test "$need_relink" = yes; then
            $ECHO >> $output "\
relink_command=\"$relink_command\""
          fi
        done
      }
 
      # Do a symbolic link so that the libtool archive can be found in
      # LD_LIBRARY_PATH before the program is installed.
      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
      ;;
    esac
    exit $EXIT_SUCCESS
}
 
{ test "$mode" = link || test "$mode" = relink; } &&
    func_mode_link ${1+"$@"}
 
 
# func_mode_uninstall arg...
func_mode_uninstall ()
{
    $opt_debug
    RM="$nonopt"
    files=
    rmforce=
    exit_status=0
 
    # This variable tells wrapper scripts just to set variables rather
    # than running their programs.
    libtool_install_magic="$magic"
 
    for arg
    do
      case $arg in
      -f) RM="$RM $arg"; rmforce=yes ;;
      -*) RM="$RM $arg" ;;
      *) files="$files $arg" ;;
      esac
    done
 
    test -z "$RM" && \
      func_fatal_help "you must specify an RM program"
 
    rmdirs=
 
    origobjdir="$objdir"
    for file in $files; do
      func_dirname "$file" "" "."
      dir="$func_dirname_result"
      if test "X$dir" = X.; then
        objdir="$origobjdir"
      else
        objdir="$dir/$origobjdir"
      fi
      func_basename "$file"
      name="$func_basename_result"
      test "$mode" = uninstall && objdir="$dir"
 
      # Remember objdir for removal later, being careful to avoid duplicates
      if test "$mode" = clean; then
        case " $rmdirs " in
          *" $objdir "*) ;;
          *) rmdirs="$rmdirs $objdir" ;;
        esac
      fi
 
      # Don't error if the file doesn't exist and rm -f was used.
      if { test -L "$file"; } >/dev/null 2>&1 ||
         { test -h "$file"; } >/dev/null 2>&1 ||
         test -f "$file"; then
        :
      elif test -d "$file"; then
        exit_status=1
        continue
      elif test "$rmforce" = yes; then
        continue
      fi
 
      rmfiles="$file"
 
      case $name in
      *.la)
        # Possibly a libtool archive, so verify it.
        if func_lalib_p "$file"; then
          func_source $dir/$name
 
          # Delete the libtool libraries and symlinks.
          for n in $library_names; do
            rmfiles="$rmfiles $objdir/$n"
          done
          test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
 
          case "$mode" in
          clean)
            case "  $library_names " in
            # "  " in the beginning catches empty $dlname
            *" $dlname "*) ;;
            *) rmfiles="$rmfiles $objdir/$dlname" ;;
            esac
            test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
            ;;
          uninstall)
            if test -n "$library_names"; then
              # Do each command in the postuninstall commands.
              func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
            fi
 
            if test -n "$old_library"; then
              # Do each command in the old_postuninstall commands.
              func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
            fi
            # FIXME: should reinstall the best remaining shared library.
            ;;
          esac
        fi
        ;;
 
      *.lo)
        # Possibly a libtool object, so verify it.
        if func_lalib_p "$file"; then
 
          # Read the .lo file
          func_source $dir/$name
 
          # Add PIC object to the list of files to remove.
          if test -n "$pic_object" &&
             test "$pic_object" != none; then
            rmfiles="$rmfiles $dir/$pic_object"
          fi
 
          # Add non-PIC object to the list of files to remove.
          if test -n "$non_pic_object" &&
             test "$non_pic_object" != none; then
            rmfiles="$rmfiles $dir/$non_pic_object"
          fi
        fi
        ;;
 
      *)
        if test "$mode" = clean ; then
          noexename=$name
          case $file in
          *.exe)
            func_stripname '' '.exe' "$file"
            file=$func_stripname_result
            func_stripname '' '.exe' "$name"
            noexename=$func_stripname_result
            # $file with .exe has already been added to rmfiles,
            # add $file without .exe
            rmfiles="$rmfiles $file"
            ;;
          esac
          # Do a test to see if this is a libtool program.
          if func_ltwrapper_p "$file"; then
            relink_command=
            func_source $dir/$noexename
 
            # note $name still contains .exe if it was in $file originally
            # as does the version of $file that was added into $rmfiles
            rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
            if test "$fast_install" = yes && test -n "$relink_command"; then
              rmfiles="$rmfiles $objdir/lt-$name"
            fi
            if test "X$noexename" != "X$name" ; then
              rmfiles="$rmfiles $objdir/lt-${noexename}.c"
            fi
          fi
        fi
        ;;
      esac
      func_show_eval "$RM $rmfiles" 'exit_status=1'
    done
    objdir="$origobjdir"
 
    # Try to remove the ${objdir}s in the directories where we deleted files
    for dir in $rmdirs; do
      if test -d "$dir"; then
        func_show_eval "rmdir $dir >/dev/null 2>&1"
      fi
    done
 
    exit $exit_status
}
 
{ test "$mode" = uninstall || test "$mode" = clean; } &&
    func_mode_uninstall ${1+"$@"}
 
test -z "$mode" && {
  help="$generic_help"
  func_fatal_help "you must specify a MODE"
}
 
test -z "$exec_cmd" && \
  func_fatal_help "invalid operation mode \`$mode'"
 
if test -n "$exec_cmd"; then
  eval exec "$exec_cmd"
  exit $EXIT_FAILURE
fi
 
exit $exit_status
 
 
# The TAGs below are defined such that we never get into a situation
# in which we disable both kinds of libraries.  Given conflicting
# choices, we go for a static library, that is the most portable,
# since we can't tell whether shared libraries were disabled because
# the user asked for that or because the platform doesn't support
# them.  This is particularly important on AIX, because we don't
# support having both static and shared libraries enabled at the same
# time on that platform, so we default to a shared-only configuration.
# If a disable-shared tag is given, we'll fallback to a static-only
# configuration.  But we'll never go from static-only to shared-only.
 
# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
build_libtool_libs=no
build_old_libs=yes
# ### END LIBTOOL TAG CONFIG: disable-shared
 
# ### BEGIN LIBTOOL TAG CONFIG: disable-static
build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
# ### END LIBTOOL TAG CONFIG: disable-static
 
# Local Variables:
# mode:shell-script
# sh-indentation:2
# End:
# vi:sw=2
Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [binutils-2.18.50/] [ltmain.sh] - Blame information for rev 851

Line No.	Rev	Author	Line
1	38	julius	`# Generated from ltmain.m4sh; do not edit by hand`
2
3			`# ltmain.sh (GNU libtool 1.2435 2007/03/18 18:44:42) 2.1a`
4			`# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996`
5
6			`# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.`
7			`# This is free software; see the source for copying conditions. There is NO`
8			`# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.`
9
10			`# This program is free software; you can redistribute it and/or modify`
11			`# it under the terms of the GNU General Public License as published by`
12			`# the Free Software Foundation; either version 2 of the License, or`
13			`# (at your option) any later version.`
14			`#`
15			`# This program is distributed in the hope that it will be useful, but`
16			`# WITHOUT ANY WARRANTY; without even the implied warranty of`
17			`# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU`
18			`# General Public License for more details.`
19			`#`
20			`# You should have received a copy of the GNU General Public License`
21			`# along with this program; if not, write to the Free Software`
22			`# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.`
23			`#`
24			`# As a special exception to the GNU General Public License, if you`
25			`# distribute this file as part of a program that contains a`
26			`# configuration script generated by Autoconf, you may include it under`
27			`# the same distribution terms that you use for the rest of that program.`
28
29			`# Usage: $progname [OPTION]... [MODE-ARG]...`
30			`#`
31			`# Provide generalized library-building support services.`
32			`#`
33			`# --config show all configuration variables`
34			`# --debug enable verbose shell tracing`
35			`# -n, --dry-run display commands without modifying any files`
36			`# --features display basic configuration information and exit`
37			`# --mode=MODE use operation mode MODE`
38			`# --preserve-dup-deps don't remove duplicate dependency libraries`
39			`# --quiet, --silent don't print informational messages`
40			`# --tag=TAG use configuration variables from tag TAG`