Subversion Repositories openrisc

;; Generic ARM Pipeline Description

;; Copyright (C) 2003, 2007 Free Software Foundation, Inc.

;;

;; This file is part of GCC.

;;

;; GCC is free software; you can redistribute it and/or modify it

;; under the terms of the GNU General Public License as published by

;; the Free Software Foundation; either version 3, or (at your option)

;; any later version.

;;

;; GCC is distributed in the hope that it will be useful, but

;; WITHOUT ANY WARRANTY; without even the implied warranty of

;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU

;; General Public License for more details.

;;

;; You should have received a copy of the GNU General Public License

;; along with GCC; see the file COPYING3.  If not see

;; .  */

(define_automaton "arm")

;; Write buffer

;

; Strictly, we should model a 4-deep write buffer for ARM7xx based chips

;

; The write buffer on some of the arm6 processors is hard to model exactly.

; There is room in the buffer for up to two addresses and up to eight words

; of memory, but the two needn't be split evenly.  When writing the two

; addresses are fully pipelined.  However, a read from memory that is not

; currently in the cache will block until the writes have completed.

; It is normally the case that FCLK and MCLK will be in the ratio 2:1, so

; writes will take 2 FCLK cycles per word, if FCLK and MCLK are asynchronous

; (they aren't allowed to be at present) then there is a startup cost of 1MCLK

; cycle to add as well.

(define_cpu_unit "write_buf" "arm")

;; Write blockage unit

;

; The write_blockage unit models (partially), the fact that reads will stall

; until the write buffer empties.

; The f_mem_r and r_mem_f could also block, but they are to the stack,

; so we don't model them here

(define_cpu_unit "write_blockage" "arm")

;; Core

;

(define_cpu_unit "core" "arm")

(define_insn_reservation "r_mem_f_wbuf" 5

  (and (eq_attr "generic_sched" "yes")

       (and (eq_attr "model_wbuf" "yes")

            (eq_attr "type" "r_mem_f")))

  "core+write_buf*3")

(define_insn_reservation "store_wbuf" 5

  (and (eq_attr "generic_sched" "yes")

       (and (eq_attr "model_wbuf" "yes")

            (eq_attr "type" "store1")))

  "core+write_buf*3+write_blockage*5")

(define_insn_reservation "store2_wbuf" 7

  (and (eq_attr "generic_sched" "yes")

       (and (eq_attr "model_wbuf" "yes")

            (eq_attr "type" "store2")))

  "core+write_buf*4+write_blockage*7")

(define_insn_reservation "store3_wbuf" 9

  (and (eq_attr "generic_sched" "yes")

       (and (eq_attr "model_wbuf" "yes")

            (eq_attr "type" "store3")))

  "core+write_buf*5+write_blockage*9")

(define_insn_reservation "store4_wbuf" 11

  (and (eq_attr "generic_sched" "yes")

       (and (eq_attr "model_wbuf" "yes")

            (eq_attr "type" "store4")))

  "core+write_buf*6+write_blockage*11")

(define_insn_reservation "store2" 3

  (and (eq_attr "generic_sched" "yes")

       (and (eq_attr "model_wbuf" "no")

            (eq_attr "type" "store2")))

  "core*3")

(define_insn_reservation "store3" 4

  (and (eq_attr "generic_sched" "yes")

       (and (eq_attr "model_wbuf" "no")

            (eq_attr "type" "store3")))

  "core*4")

(define_insn_reservation "store4" 5

  (and (eq_attr "generic_sched" "yes")

       (and (eq_attr "model_wbuf" "no")

            (eq_attr "type" "store4")))

  "core*5")

(define_insn_reservation "store_ldsched" 1

  (and (eq_attr "generic_sched" "yes")

       (and (eq_attr "ldsched" "yes")

            (eq_attr "type" "store1")))

  "core")

(define_insn_reservation "load_ldsched_xscale" 3

  (and (eq_attr "generic_sched" "yes")

       (and (eq_attr "ldsched" "yes")

            (and (eq_attr "type" "load_byte,load1")

                 (eq_attr "is_xscale" "yes"))))

  "core")

(define_insn_reservation "load_ldsched" 2

  (and (eq_attr "generic_sched" "yes")

       (and (eq_attr "ldsched" "yes")

            (and (eq_attr "type" "load_byte,load1")

                 (eq_attr "is_xscale" "no"))))

  "core")

(define_insn_reservation "load_or_store" 2

  (and (eq_attr "generic_sched" "yes")

       (and (eq_attr "ldsched" "!yes")

            (eq_attr "type" "load_byte,load1,load2,load3,load4,store1")))

  "core*2")

(define_insn_reservation "mult" 16

  (and (eq_attr "generic_sched" "yes")

       (and (eq_attr "ldsched" "no") (eq_attr "type" "mult")))

  "core*16")

(define_insn_reservation "mult_ldsched_strongarm" 3

  (and (eq_attr "generic_sched" "yes")

       (and (eq_attr "ldsched" "yes")

            (and (eq_attr "is_strongarm" "yes")

                 (eq_attr "type" "mult"))))

  "core*2")

(define_insn_reservation "mult_ldsched" 4

  (and (eq_attr "generic_sched" "yes")

       (and (eq_attr "ldsched" "yes")

            (and (eq_attr "is_strongarm" "no")

                 (eq_attr "type" "mult"))))

  "core*4")

(define_insn_reservation "multi_cycle" 32

  (and (eq_attr "generic_sched" "yes")

       (and (eq_attr "core_cycles" "multi")

            (eq_attr "type" "!mult,load_byte,load1,load2,load3,load4,store1,store2,store3,store4")))

  "core*32")

(define_insn_reservation "single_cycle" 1

  (and (eq_attr "generic_sched" "yes")

       (eq_attr "core_cycles" "single"))

  "core")