OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gcc-4.2.2/] [gcc/] [config/] [rs6000/] [sysv4.h] - Blame information for rev 816

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 38 julius
/* Target definitions for GNU compiler for PowerPC running System V.4
2
   Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
3
   2004, 2005, 2006, 2007 Free Software Foundation, Inc.
4
   Contributed by Cygnus Support.
5
 
6
   This file is part of GCC.
7
 
8
   GCC is free software; you can redistribute it and/or modify it
9
   under the terms of the GNU General Public License as published
10
   by the Free Software Foundation; either version 3, or (at your
11
   option) any later version.
12
 
13
   GCC is distributed in the hope that it will be useful, but WITHOUT
14
   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
15
   or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
16
   License for more details.
17
 
18
   You should have received a copy of the GNU General Public License
19
   along with GCC; see the file COPYING3.  If not see
20
   <http://www.gnu.org/licenses/>.  */
21
 
22
/* Header files should be C++ aware in general.  */
23
#undef  NO_IMPLICIT_EXTERN_C
24
#define NO_IMPLICIT_EXTERN_C
25
 
26
/* Yes!  We are ELF.  */
27
#define TARGET_OBJECT_FORMAT OBJECT_ELF
28
 
29
/* Default ABI to compile code for.  */
30
#define DEFAULT_ABI rs6000_current_abi
31
 
32
/* Default ABI to use.  */
33
#define RS6000_ABI_NAME "sysv"
34
 
35
/* Override rs6000.h definition.  */
36
#undef  ASM_DEFAULT_SPEC
37
#define ASM_DEFAULT_SPEC "-mppc"
38
 
39
/* Small data support types.  */
40
enum rs6000_sdata_type {
41
  SDATA_NONE,                   /* No small data support.  */
42
  SDATA_DATA,                   /* Just put data in .sbss/.sdata, don't use relocs.  */
43
  SDATA_SYSV,                   /* Use r13 to point to .sdata/.sbss.  */
44
  SDATA_EABI                    /* Use r13 like above, r2 points to .sdata2/.sbss2.  */
45
};
46
 
47
extern enum rs6000_sdata_type rs6000_sdata;
48
 
49
#define TARGET_TOC              ((target_flags & MASK_64BIT)            \
50
                                 || ((target_flags & (MASK_RELOCATABLE  \
51
                                                      | MASK_MINIMAL_TOC)) \
52
                                     && flag_pic > 1)                   \
53
                                 || DEFAULT_ABI == ABI_AIX)
54
 
55
#define TARGET_BITFIELD_TYPE    (! TARGET_NO_BITFIELD_TYPE)
56
#define TARGET_BIG_ENDIAN       (! TARGET_LITTLE_ENDIAN)
57
#define TARGET_NO_PROTOTYPE     (! TARGET_PROTOTYPE)
58
#define TARGET_NO_TOC           (! TARGET_TOC)
59
#define TARGET_NO_EABI          (! TARGET_EABI)
60
 
61
#ifdef HAVE_AS_REL16
62
#undef TARGET_SECURE_PLT
63
#define TARGET_SECURE_PLT       secure_plt
64
#endif
65
 
66
extern const char *rs6000_abi_name;
67
extern const char *rs6000_sdata_name;
68
extern const char *rs6000_tls_size_string; /* For -mtls-size= */
69
 
70
#define SDATA_DEFAULT_SIZE 8
71
 
72
/* Sometimes certain combinations of command options do not make sense
73
   on a particular target machine.  You can define a macro
74
   `OVERRIDE_OPTIONS' to take account of this.  This macro, if
75
   defined, is executed once just after all the command options have
76
   been parsed.
77
 
78
   The macro SUBTARGET_OVERRIDE_OPTIONS is provided for subtargets, to
79
   get control.  */
80
 
81
#define SUBTARGET_OVERRIDE_OPTIONS                                      \
82
do {                                                                    \
83
  if (!g_switch_set)                                                    \
84
    g_switch_value = SDATA_DEFAULT_SIZE;                                \
85
                                                                        \
86
  if (rs6000_abi_name == NULL)                                          \
87
    rs6000_abi_name = RS6000_ABI_NAME;                                  \
88
                                                                        \
89
  if (!strcmp (rs6000_abi_name, "sysv"))                                \
90
    rs6000_current_abi = ABI_V4;                                        \
91
  else if (!strcmp (rs6000_abi_name, "sysv-noeabi"))                    \
92
    {                                                                   \
93
      rs6000_current_abi = ABI_V4;                                      \
94
      target_flags &= ~ MASK_EABI;                                      \
95
    }                                                                   \
96
  else if (!strcmp (rs6000_abi_name, "sysv-eabi")                       \
97
           || !strcmp (rs6000_abi_name, "eabi"))                        \
98
    {                                                                   \
99
      rs6000_current_abi = ABI_V4;                                      \
100
      target_flags |= MASK_EABI;                                        \
101
    }                                                                   \
102
  else if (!strcmp (rs6000_abi_name, "aixdesc"))                        \
103
    rs6000_current_abi = ABI_AIX;                                       \
104
  else if (!strcmp (rs6000_abi_name, "freebsd"))                        \
105
    rs6000_current_abi = ABI_V4;                                        \
106
  else if (!strcmp (rs6000_abi_name, "linux"))                          \
107
    {                                                                   \
108
      if (TARGET_64BIT)                                                 \
109
        rs6000_current_abi = ABI_AIX;                                   \
110
      else                                                              \
111
        rs6000_current_abi = ABI_V4;                                    \
112
    }                                                                   \
113
  else if (!strcmp (rs6000_abi_name, "gnu"))                            \
114
    rs6000_current_abi = ABI_V4;                                        \
115
  else if (!strcmp (rs6000_abi_name, "netbsd"))                         \
116
    rs6000_current_abi = ABI_V4;                                        \
117
  else if (!strcmp (rs6000_abi_name, "openbsd"))                        \
118
    rs6000_current_abi = ABI_V4;                                        \
119
  else if (!strcmp (rs6000_abi_name, "i960-old"))                       \
120
    {                                                                   \
121
      rs6000_current_abi = ABI_V4;                                      \
122
      target_flags |= (MASK_LITTLE_ENDIAN | MASK_EABI                   \
123
                       | MASK_NO_BITFIELD_WORD);                        \
124
      target_flags &= ~MASK_STRICT_ALIGN;                               \
125
    }                                                                   \
126
  else                                                                  \
127
    {                                                                   \
128
      rs6000_current_abi = ABI_V4;                                      \
129
      error ("bad value for -mcall-%s", rs6000_abi_name);               \
130
    }                                                                   \
131
                                                                        \
132
  if (rs6000_sdata_name)                                                \
133
    {                                                                   \
134
      if (!strcmp (rs6000_sdata_name, "none"))                          \
135
        rs6000_sdata = SDATA_NONE;                                      \
136
      else if (!strcmp (rs6000_sdata_name, "data"))                     \
137
        rs6000_sdata = SDATA_DATA;                                      \
138
      else if (!strcmp (rs6000_sdata_name, "default"))                  \
139
        rs6000_sdata = (TARGET_EABI) ? SDATA_EABI : SDATA_SYSV;         \
140
      else if (!strcmp (rs6000_sdata_name, "sysv"))                     \
141
        rs6000_sdata = SDATA_SYSV;                                      \
142
      else if (!strcmp (rs6000_sdata_name, "eabi"))                     \
143
        rs6000_sdata = SDATA_EABI;                                      \
144
      else                                                              \
145
        error ("bad value for -msdata=%s", rs6000_sdata_name);          \
146
    }                                                                   \
147
  else if (DEFAULT_ABI == ABI_V4)                                       \
148
    {                                                                   \
149
      rs6000_sdata = SDATA_DATA;                                        \
150
      rs6000_sdata_name = "data";                                       \
151
    }                                                                   \
152
  else                                                                  \
153
    {                                                                   \
154
      rs6000_sdata = SDATA_NONE;                                        \
155
      rs6000_sdata_name = "none";                                       \
156
    }                                                                   \
157
                                                                        \
158
  if (TARGET_RELOCATABLE &&                                             \
159
      (rs6000_sdata == SDATA_EABI || rs6000_sdata == SDATA_SYSV))       \
160
    {                                                                   \
161
      rs6000_sdata = SDATA_DATA;                                        \
162
      error ("-mrelocatable and -msdata=%s are incompatible",           \
163
             rs6000_sdata_name);                                        \
164
    }                                                                   \
165
                                                                        \
166
  else if (flag_pic && DEFAULT_ABI != ABI_AIX                           \
167
           && (rs6000_sdata == SDATA_EABI                               \
168
               || rs6000_sdata == SDATA_SYSV))                          \
169
    {                                                                   \
170
      rs6000_sdata = SDATA_DATA;                                        \
171
      error ("-f%s and -msdata=%s are incompatible",                    \
172
             (flag_pic > 1) ? "PIC" : "pic",                            \
173
             rs6000_sdata_name);                                        \
174
    }                                                                   \
175
                                                                        \
176
  if ((rs6000_sdata != SDATA_NONE && DEFAULT_ABI != ABI_V4)             \
177
      || (rs6000_sdata == SDATA_EABI && !TARGET_EABI))                  \
178
    {                                                                   \
179
      rs6000_sdata = SDATA_NONE;                                        \
180
      error ("-msdata=%s and -mcall-%s are incompatible",               \
181
             rs6000_sdata_name, rs6000_abi_name);                       \
182
    }                                                                   \
183
                                                                        \
184
  targetm.have_srodata_section = rs6000_sdata == SDATA_EABI;            \
185
                                                                        \
186
  if (TARGET_RELOCATABLE && !TARGET_MINIMAL_TOC)                        \
187
    {                                                                   \
188
      target_flags |= MASK_MINIMAL_TOC;                                 \
189
      error ("-mrelocatable and -mno-minimal-toc are incompatible");    \
190
    }                                                                   \
191
                                                                        \
192
  if (TARGET_RELOCATABLE && rs6000_current_abi == ABI_AIX)              \
193
    {                                                                   \
194
      target_flags &= ~MASK_RELOCATABLE;                                \
195
      error ("-mrelocatable and -mcall-%s are incompatible",            \
196
             rs6000_abi_name);                                          \
197
    }                                                                   \
198
                                                                        \
199
  if (!TARGET_64BIT && flag_pic > 1 && rs6000_current_abi == ABI_AIX)   \
200
    {                                                                   \
201
      flag_pic = 0;                                                      \
202
      error ("-fPIC and -mcall-%s are incompatible",                    \
203
             rs6000_abi_name);                                          \
204
    }                                                                   \
205
                                                                        \
206
  if (rs6000_current_abi == ABI_AIX && TARGET_LITTLE_ENDIAN)            \
207
    {                                                                   \
208
      target_flags &= ~MASK_LITTLE_ENDIAN;                              \
209
      error ("-mcall-aixdesc must be big endian");                      \
210
    }                                                                   \
211
                                                                        \
212
  if (TARGET_SECURE_PLT != secure_plt)                                  \
213
    {                                                                   \
214
      error ("-msecure-plt not supported by your assembler");           \
215
    }                                                                   \
216
                                                                        \
217
  /* Treat -fPIC the same as -mrelocatable.  */                         \
218
  if (flag_pic > 1 && DEFAULT_ABI != ABI_AIX)                           \
219
    {                                                                   \
220
      target_flags |= MASK_RELOCATABLE | MASK_MINIMAL_TOC;              \
221
      TARGET_NO_FP_IN_TOC = 1;                                          \
222
    }                                                                   \
223
                                                                        \
224
  else if (TARGET_RELOCATABLE)                                          \
225
    flag_pic = 2;                                                       \
226
} while (0)
227
 
228
#ifndef RS6000_BI_ARCH
229
# define SUBSUBTARGET_OVERRIDE_OPTIONS                                  \
230
do {                                                                    \
231
  if ((TARGET_DEFAULT ^ target_flags) & MASK_64BIT)                     \
232
    error ("-m%s not supported in this configuration",                  \
233
           (target_flags & MASK_64BIT) ? "64" : "32");                  \
234
} while (0)
235
#endif
236
 
237
/* Override rs6000.h definition.  */
238
#undef  TARGET_DEFAULT
239
#define TARGET_DEFAULT (MASK_POWERPC | MASK_NEW_MNEMONICS)
240
 
241
/* Override rs6000.h definition.  */
242
#undef  PROCESSOR_DEFAULT
243
#define PROCESSOR_DEFAULT PROCESSOR_PPC750
244
 
245
/* SVR4 only defined for PowerPC, so short-circuit POWER patterns.  */
246
#undef  TARGET_POWER
247
#define TARGET_POWER 0
248
 
249
#define FIXED_R2 1
250
/* System V.4 uses register 13 as a pointer to the small data area,
251
   so it is not available to the normal user.  */
252
#define FIXED_R13 1
253
 
254
/* Override default big endianism definitions in rs6000.h.  */
255
#undef  BYTES_BIG_ENDIAN
256
#undef  WORDS_BIG_ENDIAN
257
#define BYTES_BIG_ENDIAN (TARGET_BIG_ENDIAN)
258
#define WORDS_BIG_ENDIAN (TARGET_BIG_ENDIAN)
259
 
260
/* Define this to set the endianness to use in libgcc2.c, which can
261
   not depend on target_flags.  */
262
#if !defined(__LITTLE_ENDIAN__) && !defined(__sun__)
263
#define LIBGCC2_WORDS_BIG_ENDIAN 1
264
#else
265
#define LIBGCC2_WORDS_BIG_ENDIAN 0
266
#endif
267
 
268
/* Define cutoff for using external functions to save floating point.
269
   Currently on V.4, always use inline stores.  */
270
#define FP_SAVE_INLINE(FIRST_REG) ((FIRST_REG) < 64)
271
 
272
/* Put jump tables in read-only memory, rather than in .text.  */
273
#define JUMP_TABLES_IN_TEXT_SECTION 0
274
 
275
/* Prefix and suffix to use to saving floating point.  */
276
#define SAVE_FP_PREFIX "_savefpr_"
277
#define SAVE_FP_SUFFIX "_l"
278
 
279
/* Prefix and suffix to use to restoring floating point.  */
280
#define RESTORE_FP_PREFIX "_restfpr_"
281
#define RESTORE_FP_SUFFIX "_l"
282
 
283
/* Type used for ptrdiff_t, as a string used in a declaration.  */
284
#define PTRDIFF_TYPE "int"
285
 
286
/* Type used for wchar_t, as a string used in a declaration.  */
287
/* Override svr4.h definition.  */
288
#undef  WCHAR_TYPE
289
#define WCHAR_TYPE "long int"
290
 
291
/* Width of wchar_t in bits.  */
292
/* Override svr4.h definition.  */
293
#undef  WCHAR_TYPE_SIZE
294
#define WCHAR_TYPE_SIZE 32
295
 
296
/* Make int foo : 8 not cause structures to be aligned to an int boundary.  */
297
/* Override elfos.h definition.  */
298
#undef  PCC_BITFIELD_TYPE_MATTERS
299
#define PCC_BITFIELD_TYPE_MATTERS (TARGET_BITFIELD_TYPE)
300
 
301
#undef  BITFIELD_NBYTES_LIMITED
302
#define BITFIELD_NBYTES_LIMITED (TARGET_NO_BITFIELD_WORD)
303
 
304
/* Define this macro to be the value 1 if instructions will fail to
305
   work if given data not on the nominal alignment.  If instructions
306
   will merely go slower in that case, define this macro as 0.  */
307
#undef  STRICT_ALIGNMENT
308
#define STRICT_ALIGNMENT (TARGET_STRICT_ALIGN)
309
 
310
/* Define this macro if you wish to preserve a certain alignment for
311
   the stack pointer, greater than what the hardware enforces.  The
312
   definition is a C expression for the desired alignment (measured
313
   in bits).  This macro must evaluate to a value equal to or larger
314
   than STACK_BOUNDARY.
315
   For the SYSV ABI and variants the alignment of the stack pointer
316
   is usually controlled manually in rs6000.c. However, to maintain
317
   alignment across alloca () in all circumstances,
318
   PREFERRED_STACK_BOUNDARY needs to be set as well.
319
   This has the additional advantage of allowing a bigger maximum
320
   alignment of user objects on the stack.  */
321
 
322
#undef PREFERRED_STACK_BOUNDARY
323
#define PREFERRED_STACK_BOUNDARY 128
324
 
325
/* Real stack boundary as mandated by the appropriate ABI.  */
326
#define ABI_STACK_BOUNDARY \
327
  ((TARGET_EABI && !TARGET_ALTIVEC && !TARGET_ALTIVEC_ABI) ? 64 : 128)
328
 
329
/* An expression for the alignment of a structure field FIELD if the
330
   alignment computed in the usual way is COMPUTED.  */
331
#define ADJUST_FIELD_ALIGN(FIELD, COMPUTED)                                   \
332
        ((TARGET_ALTIVEC && TREE_CODE (TREE_TYPE (FIELD)) == VECTOR_TYPE)     \
333
         ? 128 : COMPUTED)
334
 
335
#undef  BIGGEST_FIELD_ALIGNMENT
336
 
337
/* Use ELF style section commands.  */
338
 
339
#define TEXT_SECTION_ASM_OP     "\t.section\t\".text\""
340
 
341
#define DATA_SECTION_ASM_OP     "\t.section\t\".data\""
342
 
343
#define BSS_SECTION_ASM_OP      "\t.section\t\".bss\""
344
 
345
/* Override elfos.h definition.  */
346
#undef  INIT_SECTION_ASM_OP
347
#define INIT_SECTION_ASM_OP "\t.section\t\".init\",\"ax\""
348
 
349
/* Override elfos.h definition.  */
350
#undef  FINI_SECTION_ASM_OP
351
#define FINI_SECTION_ASM_OP "\t.section\t\".fini\",\"ax\""
352
 
353
#define TOC_SECTION_ASM_OP "\t.section\t\".got\",\"aw\""
354
 
355
/* Put PC relative got entries in .got2.  */
356
#define MINIMAL_TOC_SECTION_ASM_OP \
357
  (TARGET_RELOCATABLE || (flag_pic && DEFAULT_ABI != ABI_AIX)           \
358
   ? "\t.section\t\".got2\",\"aw\"" : "\t.section\t\".got1\",\"aw\"")
359
 
360
#define SDATA_SECTION_ASM_OP "\t.section\t\".sdata\",\"aw\""
361
#define SDATA2_SECTION_ASM_OP "\t.section\t\".sdata2\",\"a\""
362
#define SBSS_SECTION_ASM_OP "\t.section\t\".sbss\",\"aw\",@nobits"
363
 
364
/* Override default elf definitions.  */
365
#define TARGET_ASM_INIT_SECTIONS rs6000_elf_asm_init_sections
366
#undef  TARGET_ASM_RELOC_RW_MASK
367
#define TARGET_ASM_RELOC_RW_MASK rs6000_elf_reloc_rw_mask
368
#undef  TARGET_ASM_SELECT_RTX_SECTION
369
#define TARGET_ASM_SELECT_RTX_SECTION rs6000_elf_select_rtx_section
370
 
371
/* Return nonzero if this entry is to be written into the constant pool
372
   in a special way.  We do so if this is a SYMBOL_REF, LABEL_REF or a CONST
373
   containing one of them.  If -mfp-in-toc (the default), we also do
374
   this for floating-point constants.  We actually can only do this
375
   if the FP formats of the target and host machines are the same, but
376
   we can't check that since not every file that uses
377
   GO_IF_LEGITIMATE_ADDRESS_P includes real.h.
378
 
379
   Unlike AIX, we don't key off of -mminimal-toc, but instead do not
380
   allow floating point constants in the TOC if -mrelocatable.  */
381
 
382
#undef  ASM_OUTPUT_SPECIAL_POOL_ENTRY_P
383
#define ASM_OUTPUT_SPECIAL_POOL_ENTRY_P(X, MODE)                        \
384
  (TARGET_TOC                                                           \
385
   && (GET_CODE (X) == SYMBOL_REF                                       \
386
       || (GET_CODE (X) == CONST && GET_CODE (XEXP (X, 0)) == PLUS       \
387
           && GET_CODE (XEXP (XEXP (X, 0), 0)) == SYMBOL_REF)             \
388
       || GET_CODE (X) == LABEL_REF                                     \
389
       || (GET_CODE (X) == CONST_INT                                    \
390
           && GET_MODE_BITSIZE (MODE) <= GET_MODE_BITSIZE (Pmode))      \
391
       || (!TARGET_NO_FP_IN_TOC                                         \
392
           && !TARGET_RELOCATABLE                                       \
393
           && GET_CODE (X) == CONST_DOUBLE                              \
394
           && SCALAR_FLOAT_MODE_P (GET_MODE (X))                        \
395
           && BITS_PER_WORD == HOST_BITS_PER_INT)))
396
 
397
/* These macros generate the special .type and .size directives which
398
   are used to set the corresponding fields of the linker symbol table
399
   entries in an ELF object file under SVR4.  These macros also output
400
   the starting labels for the relevant functions/objects.  */
401
 
402
/* Write the extra assembler code needed to declare a function properly.
403
   Some svr4 assemblers need to also have something extra said about the
404
   function's return value.  We allow for that here.  */
405
 
406
extern int rs6000_pic_labelno;
407
 
408
/* Override elfos.h definition.  */
409
#undef  ASM_DECLARE_FUNCTION_NAME
410
#define ASM_DECLARE_FUNCTION_NAME(FILE, NAME, DECL)                     \
411
  rs6000_elf_declare_function_name ((FILE), (NAME), (DECL))
412
 
413
/* The USER_LABEL_PREFIX stuff is affected by the -fleading-underscore
414
   flag.  The LOCAL_LABEL_PREFIX variable is used by dbxelf.h.  */
415
 
416
#define LOCAL_LABEL_PREFIX "."
417
#define USER_LABEL_PREFIX ""
418
 
419
/* svr4.h overrides (*targetm.asm_out.internal_label).  */
420
 
421
#define ASM_OUTPUT_INTERNAL_LABEL_PREFIX(FILE,PREFIX)   \
422
  asm_fprintf (FILE, "%L%s", PREFIX)
423
 
424
/* Globalizing directive for a label.  */
425
#define GLOBAL_ASM_OP "\t.globl "
426
 
427
/* This says how to output assembler code to declare an
428
   uninitialized internal linkage data object.  Under SVR4,
429
   the linker seems to want the alignment of data objects
430
   to depend on their types.  We do exactly that here.  */
431
 
432
#define LOCAL_ASM_OP    "\t.local\t"
433
 
434
#define LCOMM_ASM_OP    "\t.lcomm\t"
435
 
436
/* Describe how to emit uninitialized local items.  */
437
#define ASM_OUTPUT_ALIGNED_DECL_LOCAL(FILE, DECL, NAME, SIZE, ALIGN)    \
438
do {                                                                    \
439
  if ((DECL) && rs6000_elf_in_small_data_p (DECL))                      \
440
    {                                                                   \
441
      switch_to_section (sbss_section);                                 \
442
      ASM_OUTPUT_ALIGN (FILE, exact_log2 (ALIGN / BITS_PER_UNIT));      \
443
      ASM_OUTPUT_LABEL (FILE, NAME);                                    \
444
      ASM_OUTPUT_SKIP (FILE, SIZE);                                     \
445
      if (!flag_inhibit_size_directive && (SIZE) > 0)                    \
446
        ASM_OUTPUT_SIZE_DIRECTIVE (FILE, NAME, SIZE);                   \
447
    }                                                                   \
448
  else                                                                  \
449
    {                                                                   \
450
      fprintf (FILE, "%s", LCOMM_ASM_OP);                               \
451
      assemble_name ((FILE), (NAME));                                   \
452
      fprintf ((FILE), ","HOST_WIDE_INT_PRINT_UNSIGNED",%u\n",          \
453
               (SIZE), (ALIGN) / BITS_PER_UNIT);                        \
454
    }                                                                   \
455
  ASM_OUTPUT_TYPE_DIRECTIVE (FILE, NAME, "object");                     \
456
} while (0)
457
 
458
/* Describe how to emit uninitialized external linkage items.  */
459
#define ASM_OUTPUT_ALIGNED_BSS(FILE, DECL, NAME, SIZE, ALIGN)           \
460
do {                                                                    \
461
  ASM_OUTPUT_ALIGNED_DECL_LOCAL (FILE, DECL, NAME, SIZE, ALIGN);        \
462
} while (0)
463
 
464
#ifdef HAVE_GAS_MAX_SKIP_P2ALIGN
465
/* To support -falign-* switches we need to use .p2align so
466
   that alignment directives in code sections will be padded
467
   with no-op instructions, rather than zeroes.  */
468
#define ASM_OUTPUT_MAX_SKIP_ALIGN(FILE,LOG,MAX_SKIP)                    \
469
  if ((LOG) != 0)                                                        \
470
    {                                                                   \
471
      if ((MAX_SKIP) == 0)                                               \
472
        fprintf ((FILE), "\t.p2align %d\n", (LOG));                     \
473
      else                                                              \
474
        fprintf ((FILE), "\t.p2align %d,,%d\n", (LOG), (MAX_SKIP));     \
475
    }
476
#endif
477
 
478
/* This is how to output code to push a register on the stack.
479
   It need not be very fast code.
480
 
481
   On the rs6000, we must keep the backchain up to date.  In order
482
   to simplify things, always allocate 16 bytes for a push (System V
483
   wants to keep stack aligned to a 16 byte boundary).  */
484
 
485
#define ASM_OUTPUT_REG_PUSH(FILE, REGNO)                                \
486
do {                                                                    \
487
  if (DEFAULT_ABI == ABI_V4)                                            \
488
    asm_fprintf (FILE,                                                  \
489
                 "\t{stu|stwu} %s,-16(%s)\n\t{st|stw} %s,12(%s)\n",     \
490
                 reg_names[1], reg_names[1], reg_names[REGNO],          \
491
                 reg_names[1]);                                         \
492
} while (0)
493
 
494
/* This is how to output an insn to pop a register from the stack.
495
   It need not be very fast code.  */
496
 
497
#define ASM_OUTPUT_REG_POP(FILE, REGNO)                                 \
498
do {                                                                    \
499
  if (DEFAULT_ABI == ABI_V4)                                            \
500
    asm_fprintf (FILE,                                                  \
501
                 "\t{l|lwz} %s,12(%s)\n\t{ai|addic} %s,%s,16\n",        \
502
                 reg_names[REGNO], reg_names[1], reg_names[1],          \
503
                 reg_names[1]);                                         \
504
} while (0)
505
 
506
/* Switch  Recognition by gcc.c.  Add -G xx support.  */
507
 
508
/* Override svr4.h definition.  */
509
#undef  SWITCH_TAKES_ARG
510
#define SWITCH_TAKES_ARG(CHAR)                                          \
511
  ((CHAR) == 'D' || (CHAR) == 'U' || (CHAR) == 'o'                      \
512
   || (CHAR) == 'e' || (CHAR) == 'T' || (CHAR) == 'u'                   \
513
   || (CHAR) == 'I' || (CHAR) == 'm' || (CHAR) == 'x'                   \
514
   || (CHAR) == 'L' || (CHAR) == 'A' || (CHAR) == 'V'                   \
515
   || (CHAR) == 'B' || (CHAR) == 'b' || (CHAR) == 'G')
516
 
517
extern int fixuplabelno;
518
 
519
/* Handle constructors specially for -mrelocatable.  */
520
#define TARGET_ASM_CONSTRUCTOR  rs6000_elf_asm_out_constructor
521
#define TARGET_ASM_DESTRUCTOR   rs6000_elf_asm_out_destructor
522
 
523
/* This is the end of what might become sysv4.h.  */
524
 
525
/* Use DWARF 2 debugging information by default.  */
526
#undef  PREFERRED_DEBUGGING_TYPE
527
#define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
528
 
529
/* Historically we have also supported stabs debugging.  */
530
#define DBX_DEBUGGING_INFO 1
531
 
532
#define TARGET_ENCODE_SECTION_INFO  rs6000_elf_encode_section_info
533
#define TARGET_IN_SMALL_DATA_P  rs6000_elf_in_small_data_p
534
 
535
/* The ELF version doesn't encode [DS] or whatever at the end of symbols.  */
536
 
537
#define RS6000_OUTPUT_BASENAME(FILE, NAME)      \
538
    assemble_name (FILE, NAME)
539
 
540
/* We have to output the stabs for the function name *first*, before
541
   outputting its label.  */
542
 
543
#define DBX_FUNCTION_FIRST
544
 
545
/* This is the end of what might become sysv4dbx.h.  */
546
 
547
#ifndef TARGET_VERSION
548
#define TARGET_VERSION fprintf (stderr, " (PowerPC System V.4)");
549
#endif
550
 
551
#define TARGET_OS_SYSV_CPP_BUILTINS()           \
552
  do                                            \
553
    {                                           \
554
      if (target_flags_explicit                 \
555
          & MASK_RELOCATABLE)                   \
556
        builtin_define ("_RELOCATABLE");        \
557
    }                                           \
558
  while (0)
559
 
560
#ifndef TARGET_OS_CPP_BUILTINS
561
#define TARGET_OS_CPP_BUILTINS()                \
562
  do                                            \
563
    {                                           \
564
      builtin_define_std ("PPC");               \
565
      builtin_define_std ("unix");              \
566
      builtin_define ("__svr4__");              \
567
      builtin_assert ("system=unix");           \
568
      builtin_assert ("system=svr4");           \
569
      builtin_assert ("cpu=powerpc");           \
570
      builtin_assert ("machine=powerpc");       \
571
      TARGET_OS_SYSV_CPP_BUILTINS ();           \
572
    }                                           \
573
  while (0)
574
#endif
575
 
576
/* Pass various options to the assembler.  */
577
/* Override svr4.h definition.  */
578
#undef  ASM_SPEC
579
#define ASM_SPEC "%(asm_cpu) \
580
%{.s: %{mregnames} %{mno-regnames}} %{.S: %{mregnames} %{mno-regnames}} \
581
%{v:-V} %{Qy:} %{!Qn:-Qy} %{n} %{T} %{Ym,*} %{Yd,*} %{Wa,*:%*} \
582
%{mrelocatable} %{mrelocatable-lib} %{fpic|fpie|fPIC|fPIE:-K PIC} \
583
%{memb|msdata|msdata=eabi: -memb} \
584
%{mlittle|mlittle-endian:-mlittle; \
585
  mbig|mbig-endian      :-mbig;    \
586
  mcall-aixdesc |                  \
587
  mcall-freebsd |                  \
588
  mcall-netbsd  |                  \
589
  mcall-openbsd |                  \
590
  mcall-linux   |                  \
591
  mcall-gnu             :-mbig;    \
592
  mcall-i960-old        :-mlittle}"
593
 
594
#define CC1_ENDIAN_BIG_SPEC ""
595
 
596
#define CC1_ENDIAN_LITTLE_SPEC "\
597
%{!mstrict-align: %{!mno-strict-align: \
598
    %{!mcall-i960-old: \
599
        -mstrict-align \
600
    } \
601
}}"
602
 
603
#define CC1_ENDIAN_DEFAULT_SPEC "%(cc1_endian_big)"
604
 
605
#ifndef CC1_SECURE_PLT_DEFAULT_SPEC
606
#define CC1_SECURE_PLT_DEFAULT_SPEC ""
607
#endif
608
 
609
/* Pass -G xxx to the compiler and set correct endian mode.  */
610
#define CC1_SPEC "%{G*} \
611
%{mlittle|mlittle-endian: %(cc1_endian_little);           \
612
  mbig   |mbig-endian   : %(cc1_endian_big);              \
613
  mcall-aixdesc |                                         \
614
  mcall-freebsd |                                         \
615
  mcall-netbsd  |                                         \
616
  mcall-openbsd |                                         \
617
  mcall-linux   |                                         \
618
  mcall-gnu             : -mbig %(cc1_endian_big);        \
619
  mcall-i960-old        : -mlittle %(cc1_endian_little);  \
620
                        : %(cc1_endian_default)}          \
621
%{meabi: %{!mcall-*: -mcall-sysv }} \
622
%{!meabi: %{!mno-eabi: \
623
    %{mrelocatable: -meabi } \
624
    %{mcall-freebsd: -mno-eabi } \
625
    %{mcall-i960-old: -meabi } \
626
    %{mcall-linux: -mno-eabi } \
627
    %{mcall-gnu: -mno-eabi } \
628
    %{mcall-netbsd: -mno-eabi } \
629
    %{mcall-openbsd: -mno-eabi }}} \
630
%{msdata: -msdata=default} \
631
%{mno-sdata: -msdata=none} \
632
%{!mbss-plt: %{!msecure-plt: %(cc1_secure_plt_default)}} \
633
%{profile: -p}"
634
 
635
/* Don't put -Y P,<path> for cross compilers.  */
636
#ifndef CROSS_COMPILE
637
#define LINK_PATH_SPEC "\
638
%{!R*:%{L*:-R %*}} \
639
%{!nostdlib: %{!YP,*: \
640
    %{compat-bsd: \
641
        %{p:-Y P,/usr/ucblib:/usr/ccs/lib/libp:/usr/lib/libp:/usr/ccs/lib:/usr/lib} \
642
        %{!p:-Y P,/usr/ucblib:/usr/ccs/lib:/usr/lib}} \
643
        %{!R*: %{!L*: -R /usr/ucblib}} \
644
    %{!compat-bsd: \
645
        %{p:-Y P,/usr/ccs/lib/libp:/usr/lib/libp:/usr/ccs/lib:/usr/lib} \
646
        %{!p:-Y P,/usr/ccs/lib:/usr/lib}}}}"
647
 
648
#else
649
#define LINK_PATH_SPEC ""
650
#endif
651
 
652
/* Default starting address if specified.  */
653
#define LINK_START_SPEC "\
654
%{mads         : %(link_start_ads)         ; \
655
  myellowknife : %(link_start_yellowknife) ; \
656
  mmvme        : %(link_start_mvme)        ; \
657
  msim         : %(link_start_sim)         ; \
658
  mwindiss     : %(link_start_windiss)     ; \
659
  mcall-freebsd: %(link_start_freebsd)     ; \
660
  mcall-linux  : %(link_start_linux)       ; \
661
  mcall-gnu    : %(link_start_gnu)         ; \
662
  mcall-netbsd : %(link_start_netbsd)      ; \
663
  mcall-openbsd: %(link_start_openbsd)     ; \
664
               : %(link_start_default)     }"
665
 
666
#define LINK_START_DEFAULT_SPEC ""
667
 
668
/* Override svr4.h definition.  */
669
#undef  LINK_SPEC
670
#define LINK_SPEC "\
671
%{h*} %{v:-V} %{!msdata=none:%{G*}} %{msdata=none:-G0} \
672
%{YP,*} %{R*} \
673
%{Qy:} %{!Qn:-Qy} \
674
%(link_shlib) \
675
%{!Wl,-T*: %{!T*: %(link_start) }} \
676
%(link_target) \
677
%(link_os)"
678
 
679
/* For now, turn off shared libraries by default.  */
680
#ifndef SHARED_LIB_SUPPORT
681
#define NO_SHARED_LIB_SUPPORT
682
#endif
683
 
684
#ifndef NO_SHARED_LIB_SUPPORT
685
/* Shared libraries are default.  */
686
#define LINK_SHLIB_SPEC "\
687
%{!static: %(link_path) %{!R*:%{L*:-R %*}}} \
688
%{mshlib: } \
689
%{static:-dn -Bstatic} \
690
%{shared:-G -dy -z text} \
691
%{symbolic:-Bsymbolic -G -dy -z text}"
692
 
693
#else
694
/* Shared libraries are not default.  */
695
#define LINK_SHLIB_SPEC "\
696
%{mshlib: %(link_path) } \
697
%{!mshlib: %{!shared: %{!symbolic: -dn -Bstatic}}} \
698
%{static: } \
699
%{shared:-G -dy -z text %(link_path) } \
700
%{symbolic:-Bsymbolic -G -dy -z text %(link_path) }"
701
#endif
702
 
703
/* Override the default target of the linker.  */
704
#define LINK_TARGET_SPEC "\
705
%{mlittle: --oformat elf32-powerpcle } %{mlittle-endian: --oformat elf32-powerpcle } \
706
%{!mlittle: %{!mlittle-endian: %{!mbig: %{!mbig-endian: \
707
    %{mcall-i960-old: --oformat elf32-powerpcle} \
708
  }}}}"
709
 
710
/* Any specific OS flags.  */
711
#define LINK_OS_SPEC "\
712
%{mads         : %(link_os_ads)         ; \
713
  myellowknife : %(link_os_yellowknife) ; \
714
  mmvme        : %(link_os_mvme)        ; \
715
  msim         : %(link_os_sim)         ; \
716
  mwindiss     : %(link_os_windiss)     ; \
717
  mcall-freebsd: %(link_os_freebsd)     ; \
718
  mcall-linux  : %(link_os_linux)       ; \
719
  mcall-gnu    : %(link_os_gnu)         ; \
720
  mcall-netbsd : %(link_os_netbsd)      ; \
721
  mcall-openbsd: %(link_os_openbsd)     ; \
722
               : %(link_os_default)     }"
723
 
724
#define LINK_OS_DEFAULT_SPEC ""
725
 
726
/* Override rs6000.h definition.  */
727
#undef  CPP_SPEC
728
#define CPP_SPEC "%{posix: -D_POSIX_SOURCE} \
729
%{mads         : %(cpp_os_ads)         ; \
730
  myellowknife : %(cpp_os_yellowknife) ; \
731
  mmvme        : %(cpp_os_mvme)        ; \
732
  msim         : %(cpp_os_sim)         ; \
733
  mwindiss     : %(cpp_os_windiss)     ; \
734
  mcall-freebsd: %(cpp_os_freebsd)     ; \
735
  mcall-linux  : %(cpp_os_linux)       ; \
736
  mcall-gnu    : %(cpp_os_gnu)         ; \
737
  mcall-netbsd : %(cpp_os_netbsd)      ; \
738
  mcall-openbsd: %(cpp_os_openbsd)     ; \
739
               : %(cpp_os_default)     }"
740
 
741
#define CPP_OS_DEFAULT_SPEC ""
742
 
743
/* Override svr4.h definition.  */
744
#undef  STARTFILE_SPEC
745
#define STARTFILE_SPEC "\
746
%{mads         : %(startfile_ads)         ; \
747
  myellowknife : %(startfile_yellowknife) ; \
748
  mmvme        : %(startfile_mvme)        ; \
749
  msim         : %(startfile_sim)         ; \
750
  mwindiss     : %(startfile_windiss)     ; \
751
  mcall-freebsd: %(startfile_freebsd)     ; \
752
  mcall-linux  : %(startfile_linux)       ; \
753
  mcall-gnu    : %(startfile_gnu)         ; \
754
  mcall-netbsd : %(startfile_netbsd)      ; \
755
  mcall-openbsd: %(startfile_openbsd)     ; \
756
               : %(startfile_default)     }"
757
 
758
#define STARTFILE_DEFAULT_SPEC ""
759
 
760
/* Override svr4.h definition.  */
761
#undef  LIB_SPEC
762
#define LIB_SPEC "\
763
%{mads         : %(lib_ads)         ; \
764
  myellowknife : %(lib_yellowknife) ; \
765
  mmvme        : %(lib_mvme)        ; \
766
  msim         : %(lib_sim)         ; \
767
  mwindiss     : %(lib_windiss)     ; \
768
  mcall-freebsd: %(lib_freebsd)     ; \
769
  mcall-linux  : %(lib_linux)       ; \
770
  mcall-gnu    : %(lib_gnu)         ; \
771
  mcall-netbsd : %(lib_netbsd)      ; \
772
  mcall-openbsd: %(lib_openbsd)     ; \
773
               : %(lib_default)     }"
774
 
775
#define LIB_DEFAULT_SPEC ""
776
 
777
/* Override svr4.h definition.  */
778
#undef  ENDFILE_SPEC
779
#define ENDFILE_SPEC "\
780
%{mads         : crtsavres.o%s        %(endfile_ads)         ; \
781
  myellowknife : crtsavres.o%s        %(endfile_yellowknife) ; \
782
  mmvme        : crtsavres.o%s        %(endfile_mvme)        ; \
783
  msim         : crtsavres.o%s        %(endfile_sim)         ; \
784
  mwindiss     :                      %(endfile_windiss)     ; \
785
  mcall-freebsd: crtsavres.o%s        %(endfile_freebsd)     ; \
786
  mcall-linux  : crtsavres.o%s        %(endfile_linux)       ; \
787
  mcall-gnu    : crtsavres.o%s        %(endfile_gnu)         ; \
788
  mcall-netbsd : crtsavres.o%s        %(endfile_netbsd)      ; \
789
  mcall-openbsd: crtsavres.o%s        %(endfile_openbsd)     ; \
790
               : %(crtsavres_default) %(endfile_default)     }"
791
 
792
#define CRTSAVRES_DEFAULT_SPEC "crtsavres.o%s"
793
 
794
#define ENDFILE_DEFAULT_SPEC ""
795
 
796
/* Motorola ADS support.  */
797
#define LIB_ADS_SPEC "--start-group -lads -lc --end-group"
798
 
799
#define STARTFILE_ADS_SPEC "ecrti.o%s crt0.o%s crtbegin.o%s"
800
 
801
#define ENDFILE_ADS_SPEC "crtend.o%s ecrtn.o%s"
802
 
803
#define LINK_START_ADS_SPEC "-T ads.ld%s"
804
 
805
#define LINK_OS_ADS_SPEC ""
806
 
807
#define CPP_OS_ADS_SPEC ""
808
 
809
/* Motorola Yellowknife support.  */
810
#define LIB_YELLOWKNIFE_SPEC "--start-group -lyk -lc --end-group"
811
 
812
#define STARTFILE_YELLOWKNIFE_SPEC "ecrti.o%s crt0.o%s crtbegin.o%s"
813
 
814
#define ENDFILE_YELLOWKNIFE_SPEC "crtend.o%s ecrtn.o%s"
815
 
816
#define LINK_START_YELLOWKNIFE_SPEC "-T yellowknife.ld%s"
817
 
818
#define LINK_OS_YELLOWKNIFE_SPEC ""
819
 
820
#define CPP_OS_YELLOWKNIFE_SPEC ""
821
 
822
/* Motorola MVME support.  */
823
#define LIB_MVME_SPEC "--start-group -lmvme -lc --end-group"
824
 
825
#define STARTFILE_MVME_SPEC "ecrti.o%s crt0.o%s crtbegin.o%s"
826
 
827
#define ENDFILE_MVME_SPEC "crtend.o%s ecrtn.o%s"
828
 
829
#define LINK_START_MVME_SPEC "-Ttext 0x40000"
830
 
831
#define LINK_OS_MVME_SPEC ""
832
 
833
#define CPP_OS_MVME_SPEC ""
834
 
835
/* PowerPC simulator based on netbsd system calls support.  */
836
#define LIB_SIM_SPEC "--start-group -lsim -lc --end-group"
837
 
838
#define STARTFILE_SIM_SPEC "ecrti.o%s sim-crt0.o%s crtbegin.o%s"
839
 
840
#define ENDFILE_SIM_SPEC "crtend.o%s ecrtn.o%s"
841
 
842
#define LINK_START_SIM_SPEC ""
843
 
844
#define LINK_OS_SIM_SPEC "-m elf32ppcsim"
845
 
846
#define CPP_OS_SIM_SPEC ""
847
 
848
/* FreeBSD support.  */
849
 
850
#define CPP_OS_FREEBSD_SPEC     "\
851
  -D__PPC__ -D__ppc__ -D__PowerPC__ -D__powerpc__ \
852
  -Acpu=powerpc -Amachine=powerpc"
853
 
854
#define STARTFILE_FREEBSD_SPEC  FBSD_STARTFILE_SPEC
855
#define ENDFILE_FREEBSD_SPEC    FBSD_ENDFILE_SPEC
856
#define LIB_FREEBSD_SPEC        FBSD_LIB_SPEC
857
#define LINK_START_FREEBSD_SPEC ""
858
 
859
#define LINK_OS_FREEBSD_SPEC "\
860
  %{p:%nconsider using `-pg' instead of `-p' with gprof(1)} \
861
  %{v:-V} \
862
  %{assert*} %{R*} %{rpath*} %{defsym*} \
863
  %{shared:-Bshareable %{h*} %{soname*}} \
864
  %{!shared: \
865
    %{!static: \
866
      %{rdynamic: -export-dynamic} \
867
      %{!dynamic-linker:-dynamic-linker %(fbsd_dynamic_linker) }} \
868
    %{static:-Bstatic}} \
869
  %{symbolic:-Bsymbolic}"
870
 
871
/* GNU/Linux support.  */
872
#define LIB_LINUX_SPEC "%{mnewlib: --start-group -llinux -lc --end-group } \
873
%{!mnewlib: %{pthread:-lpthread} %{shared:-lc} \
874
%{!shared: %{profile:-lc_p} %{!profile:-lc}}}"
875
 
876
#ifdef HAVE_LD_PIE
877
#define STARTFILE_LINUX_SPEC "\
878
%{!shared: %{pg|p|profile:gcrt1.o%s;pie:Scrt1.o%s;:crt1.o%s}} \
879
%{mnewlib:ecrti.o%s;:crti.o%s} \
880
%{static:crtbeginT.o%s;shared|pie:crtbeginS.o%s;:crtbegin.o%s}"
881
#else
882
#define STARTFILE_LINUX_SPEC "\
883
%{!shared: %{pg|p|profile:gcrt1.o%s;:crt1.o%s}} \
884
%{mnewlib:ecrti.o%s;:crti.o%s} \
885
%{static:crtbeginT.o%s;shared|pie:crtbeginS.o%s;:crtbegin.o%s}"
886
#endif
887
 
888
#define ENDFILE_LINUX_SPEC "\
889
%{shared|pie:crtendS.o%s;:crtend.o%s} \
890
%{mnewlib:ecrtn.o%s;:crtn.o%s}"
891
 
892
#define LINK_START_LINUX_SPEC ""
893
 
894
#define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1"
895
#define UCLIBC_DYNAMIC_LINKER "/lib/ld-uClibc.so.0"
896
#if UCLIBC_DEFAULT
897
#define CHOOSE_DYNAMIC_LINKER(G, U) "%{mglibc:%{muclibc:%e-mglibc and -muclibc used together}" G ";:" U "}"
898
#else
899
#define CHOOSE_DYNAMIC_LINKER(G, U) "%{muclibc:%{mglibc:%e-mglibc and -muclibc used together}" U ";:" G "}"
900
#endif
901
#define LINUX_DYNAMIC_LINKER \
902
  CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER, UCLIBC_DYNAMIC_LINKER)
903
 
904
#define LINK_OS_LINUX_SPEC "-m elf32ppclinux %{!shared: %{!static: \
905
  %{rdynamic:-export-dynamic} \
906
  %{!dynamic-linker:-dynamic-linker " LINUX_DYNAMIC_LINKER "}}}"
907
 
908
#if defined(HAVE_LD_EH_FRAME_HDR)
909
# define LINK_EH_SPEC "%{!static:--eh-frame-hdr} "
910
#endif
911
 
912
#define CPP_OS_LINUX_SPEC "-D__unix__ -D__gnu_linux__ -D__linux__ \
913
%{!undef:                                                         \
914
  %{!ansi:                                                        \
915
    %{!std=*:-Dunix -D__unix -Dlinux -D__linux}                   \
916
    %{std=gnu*:-Dunix -D__unix -Dlinux -D__linux}}}               \
917
-Asystem=linux -Asystem=unix -Asystem=posix %{pthread:-D_REENTRANT}"
918
 
919
/* GNU/Hurd support.  */
920
#define LIB_GNU_SPEC "%{mnewlib: --start-group -lgnu -lc --end-group } \
921
%{!mnewlib: %{shared:-lc} %{!shared: %{pthread:-lpthread } \
922
%{profile:-lc_p} %{!profile:-lc}}}"
923
 
924
#define STARTFILE_GNU_SPEC "\
925
%{!shared: %{!static: %{pg:gcrt1.o%s} %{!pg:%{p:gcrt1.o%s} %{!p:crt1.o%s}}}} \
926
%{static: %{pg:gcrt0.o%s} %{!pg:%{p:gcrt0.o%s} %{!p:crt0.o%s}}} \
927
%{mnewlib: ecrti.o%s} %{!mnewlib: crti.o%s} \
928
%{!shared:crtbegin.o%s} %{shared:crtbeginS.o%s}"
929
 
930
#define ENDFILE_GNU_SPEC "%{!shared:crtend.o%s} %{shared:crtendS.o%s} \
931
%{mnewlib: ecrtn.o%s} %{!mnewlib: crtn.o%s}"
932
 
933
#define LINK_START_GNU_SPEC ""
934
 
935
#define LINK_OS_GNU_SPEC "-m elf32ppclinux %{!shared: %{!static: \
936
  %{rdynamic:-export-dynamic} \
937
  %{!dynamic-linker:-dynamic-linker /lib/ld.so.1}}}"
938
 
939
#define CPP_OS_GNU_SPEC "-D__unix__ -D__gnu_hurd__ -D__GNU__    \
940
%{!undef:                                                       \
941
  %{!ansi: -Dunix -D__unix}}                                    \
942
-Asystem=gnu -Asystem=unix -Asystem=posix %{pthread:-D_REENTRANT}"
943
 
944
/* NetBSD support.  */
945
#define LIB_NETBSD_SPEC "\
946
%{profile:-lgmon -lc_p} %{!profile:-lc}"
947
 
948
#define STARTFILE_NETBSD_SPEC "\
949
ncrti.o%s crt0.o%s \
950
%{!shared:crtbegin.o%s} %{shared:crtbeginS.o%s}"
951
 
952
#define ENDFILE_NETBSD_SPEC "\
953
%{!shared:crtend.o%s} %{shared:crtendS.o%s} \
954
ncrtn.o%s"
955
 
956
#define LINK_START_NETBSD_SPEC "\
957
"
958
 
959
#define LINK_OS_NETBSD_SPEC "\
960
%{!shared: %{!static: \
961
  %{rdynamic:-export-dynamic} \
962
  %{!dynamic-linker:-dynamic-linker /usr/libexec/ld.elf_so}}}"
963
 
964
#define CPP_OS_NETBSD_SPEC "\
965
-D__powerpc__ -D__NetBSD__ -D__KPRINTF_ATTRIBUTE__"
966
 
967
/* OpenBSD support.  */
968
#ifndef LIB_OPENBSD_SPEC
969
#define LIB_OPENBSD_SPEC "%{!shared:%{pthread:-lpthread%{p:_p}%{!p:%{pg:_p}}}} %{!shared:-lc%{p:_p}%{!p:%{pg:_p}}}"
970
#endif
971
 
972
#ifndef STARTFILE_OPENBSD_SPEC
973
#define STARTFILE_OPENBSD_SPEC "\
974
%{!shared: %{pg:gcrt0.o%s} %{!pg:%{p:gcrt0.o%s} %{!p:crt0.o%s}}} \
975
%{!shared:crtbegin.o%s} %{shared:crtbeginS.o%s}"
976
#endif
977
 
978
#ifndef ENDFILE_OPENBSD_SPEC
979
#define ENDFILE_OPENBSD_SPEC "\
980
%{!shared:crtend.o%s} %{shared:crtendS.o%s}"
981
#endif
982
 
983
#ifndef LINK_START_OPENBSD_SPEC
984
#define LINK_START_OPENBSD_SPEC "-Ttext 0x400074"
985
#endif
986
 
987
#ifndef LINK_OS_OPENBSD_SPEC
988
#define LINK_OS_OPENBSD_SPEC ""
989
#endif
990
 
991
#ifndef CPP_OS_OPENBSD_SPEC
992
#define CPP_OS_OPENBSD_SPEC "%{posix:-D_POSIX_SOURCE} %{pthread:-D_POSIX_THREADS}"
993
#endif
994
 
995
/* WindISS support.  */
996
 
997
#define LIB_WINDISS_SPEC "--start-group -li -lcfp -lwindiss -lram -limpl -limpfp --end-group"
998
 
999
#define CPP_OS_WINDISS_SPEC "\
1000
-D__rtasim \
1001
-D__EABI__ \
1002
-D__ppc \
1003
%{!msoft-float: -D__hardfp} \
1004
"
1005
 
1006
#define STARTFILE_WINDISS_SPEC "crt0.o%s crtbegin.o%s"
1007
 
1008
#define ENDFILE_WINDISS_SPEC "crtend.o%s"
1009
 
1010
#define LINK_START_WINDISS_SPEC ""
1011
 
1012
#define LINK_OS_WINDISS_SPEC ""
1013
 
1014
/* Define any extra SPECS that the compiler needs to generate.  */
1015
/* Override rs6000.h definition.  */
1016
#undef  SUBTARGET_EXTRA_SPECS
1017
#define SUBTARGET_EXTRA_SPECS                                           \
1018
  { "crtsavres_default",        CRTSAVRES_DEFAULT_SPEC },               \
1019
  { "lib_ads",                  LIB_ADS_SPEC },                         \
1020
  { "lib_yellowknife",          LIB_YELLOWKNIFE_SPEC },                 \
1021
  { "lib_mvme",                 LIB_MVME_SPEC },                        \
1022
  { "lib_sim",                  LIB_SIM_SPEC },                         \
1023
  { "lib_freebsd",              LIB_FREEBSD_SPEC },                     \
1024
  { "lib_gnu",                  LIB_GNU_SPEC },                         \
1025
  { "lib_linux",                LIB_LINUX_SPEC },                       \
1026
  { "lib_netbsd",               LIB_NETBSD_SPEC },                      \
1027
  { "lib_openbsd",              LIB_OPENBSD_SPEC },                     \
1028
  { "lib_windiss",              LIB_WINDISS_SPEC },                     \
1029
  { "lib_default",              LIB_DEFAULT_SPEC },                     \
1030
  { "startfile_ads",            STARTFILE_ADS_SPEC },                   \
1031
  { "startfile_yellowknife",    STARTFILE_YELLOWKNIFE_SPEC },           \
1032
  { "startfile_mvme",           STARTFILE_MVME_SPEC },                  \
1033
  { "startfile_sim",            STARTFILE_SIM_SPEC },                   \
1034
  { "startfile_freebsd",        STARTFILE_FREEBSD_SPEC },               \
1035
  { "startfile_gnu",            STARTFILE_GNU_SPEC },                   \
1036
  { "startfile_linux",          STARTFILE_LINUX_SPEC },                 \
1037
  { "startfile_netbsd",         STARTFILE_NETBSD_SPEC },                \
1038
  { "startfile_openbsd",        STARTFILE_OPENBSD_SPEC },               \
1039
  { "startfile_windiss",        STARTFILE_WINDISS_SPEC },               \
1040
  { "startfile_default",        STARTFILE_DEFAULT_SPEC },               \
1041
  { "endfile_ads",              ENDFILE_ADS_SPEC },                     \
1042
  { "endfile_yellowknife",      ENDFILE_YELLOWKNIFE_SPEC },             \
1043
  { "endfile_mvme",             ENDFILE_MVME_SPEC },                    \
1044
  { "endfile_sim",              ENDFILE_SIM_SPEC },                     \
1045
  { "endfile_freebsd",          ENDFILE_FREEBSD_SPEC },                 \
1046
  { "endfile_gnu",              ENDFILE_GNU_SPEC },                     \
1047
  { "endfile_linux",            ENDFILE_LINUX_SPEC },                   \
1048
  { "endfile_netbsd",           ENDFILE_NETBSD_SPEC },                  \
1049
  { "endfile_openbsd",          ENDFILE_OPENBSD_SPEC },                 \
1050
  { "endfile_windiss",          ENDFILE_WINDISS_SPEC },                 \
1051
  { "endfile_default",          ENDFILE_DEFAULT_SPEC },                 \
1052
  { "link_path",                LINK_PATH_SPEC },                       \
1053
  { "link_shlib",               LINK_SHLIB_SPEC },                      \
1054
  { "link_target",              LINK_TARGET_SPEC },                     \
1055
  { "link_start",               LINK_START_SPEC },                      \
1056
  { "link_start_ads",           LINK_START_ADS_SPEC },                  \
1057
  { "link_start_yellowknife",   LINK_START_YELLOWKNIFE_SPEC },          \
1058
  { "link_start_mvme",          LINK_START_MVME_SPEC },                 \
1059
  { "link_start_sim",           LINK_START_SIM_SPEC },                  \
1060
  { "link_start_freebsd",       LINK_START_FREEBSD_SPEC },              \
1061
  { "link_start_gnu",           LINK_START_GNU_SPEC },                  \
1062
  { "link_start_linux",         LINK_START_LINUX_SPEC },                \
1063
  { "link_start_netbsd",        LINK_START_NETBSD_SPEC },               \
1064
  { "link_start_openbsd",       LINK_START_OPENBSD_SPEC },              \
1065
  { "link_start_windiss",       LINK_START_WINDISS_SPEC },              \
1066
  { "link_start_default",       LINK_START_DEFAULT_SPEC },              \
1067
  { "link_os",                  LINK_OS_SPEC },                         \
1068
  { "link_os_ads",              LINK_OS_ADS_SPEC },                     \
1069
  { "link_os_yellowknife",      LINK_OS_YELLOWKNIFE_SPEC },             \
1070
  { "link_os_mvme",             LINK_OS_MVME_SPEC },                    \
1071
  { "link_os_sim",              LINK_OS_SIM_SPEC },                     \
1072
  { "link_os_freebsd",          LINK_OS_FREEBSD_SPEC },                 \
1073
  { "link_os_linux",            LINK_OS_LINUX_SPEC },                   \
1074
  { "link_os_gnu",              LINK_OS_GNU_SPEC },                     \
1075
  { "link_os_netbsd",           LINK_OS_NETBSD_SPEC },                  \
1076
  { "link_os_openbsd",          LINK_OS_OPENBSD_SPEC },                 \
1077
  { "link_os_windiss",          LINK_OS_WINDISS_SPEC },                 \
1078
  { "link_os_default",          LINK_OS_DEFAULT_SPEC },                 \
1079
  { "cc1_endian_big",           CC1_ENDIAN_BIG_SPEC },                  \
1080
  { "cc1_endian_little",        CC1_ENDIAN_LITTLE_SPEC },               \
1081
  { "cc1_endian_default",       CC1_ENDIAN_DEFAULT_SPEC },              \
1082
  { "cc1_secure_plt_default",   CC1_SECURE_PLT_DEFAULT_SPEC },          \
1083
  { "cpp_os_ads",               CPP_OS_ADS_SPEC },                      \
1084
  { "cpp_os_yellowknife",       CPP_OS_YELLOWKNIFE_SPEC },              \
1085
  { "cpp_os_mvme",              CPP_OS_MVME_SPEC },                     \
1086
  { "cpp_os_sim",               CPP_OS_SIM_SPEC },                      \
1087
  { "cpp_os_freebsd",           CPP_OS_FREEBSD_SPEC },                  \
1088
  { "cpp_os_gnu",               CPP_OS_GNU_SPEC },                      \
1089
  { "cpp_os_linux",             CPP_OS_LINUX_SPEC },                    \
1090
  { "cpp_os_netbsd",            CPP_OS_NETBSD_SPEC },                   \
1091
  { "cpp_os_openbsd",           CPP_OS_OPENBSD_SPEC },                  \
1092
  { "cpp_os_windiss",           CPP_OS_WINDISS_SPEC },                  \
1093
  { "cpp_os_default",           CPP_OS_DEFAULT_SPEC },                  \
1094
  { "fbsd_dynamic_linker",      FBSD_DYNAMIC_LINKER },                  \
1095
  SUBSUBTARGET_EXTRA_SPECS
1096
 
1097
#define SUBSUBTARGET_EXTRA_SPECS
1098
 
1099
/* Define this macro as a C expression for the initializer of an
1100
   array of string to tell the driver program which options are
1101
   defaults for this target and thus do not need to be handled
1102
   specially when using `MULTILIB_OPTIONS'.
1103
 
1104
   Do not define this macro if `MULTILIB_OPTIONS' is not defined in
1105
   the target makefile fragment or if none of the options listed in
1106
   `MULTILIB_OPTIONS' are set by default.  *Note Target Fragment::.  */
1107
 
1108
#define MULTILIB_DEFAULTS { "mbig", "mcall-sysv" }
1109
 
1110
/* Define this macro if the code for function profiling should come
1111
   before the function prologue.  Normally, the profiling code comes
1112
   after.  */
1113
#define PROFILE_BEFORE_PROLOGUE 1
1114
 
1115
/* Function name to call to do profiling.  */
1116
#define RS6000_MCOUNT "_mcount"
1117
 
1118
/* Define this macro (to a value of 1) if you want to support the
1119
   Win32 style pragmas #pragma pack(push,<n>)' and #pragma
1120
   pack(pop)'.  The pack(push,<n>) pragma specifies the maximum
1121
   alignment (in bytes) of fields within a structure, in much the
1122
   same way as the __aligned__' and __packed__' __attribute__'s
1123
   do.  A pack value of zero resets the behavior to the default.
1124
   Successive invocations of this pragma cause the previous values to
1125
   be stacked, so that invocations of #pragma pack(pop)' will return
1126
   to the previous value.  */
1127
 
1128
#define HANDLE_PRAGMA_PACK_PUSH_POP 1
1129
 
1130
/* Select a format to encode pointers in exception handling data.  CODE
1131
   is 0 for data, 1 for code labels, 2 for function pointers.  GLOBAL is
1132
   true if the symbol may be affected by dynamic relocations.  */
1133
#define ASM_PREFERRED_EH_DATA_FORMAT(CODE,GLOBAL)                            \
1134
  ((flag_pic || TARGET_RELOCATABLE)                                          \
1135
   ? (((GLOBAL) ? DW_EH_PE_indirect : 0) | DW_EH_PE_pcrel | DW_EH_PE_sdata4) \
1136
   : DW_EH_PE_absptr)
1137
 
1138
#define DOUBLE_INT_ASM_OP "\t.quad\t"
1139
 
1140
/* Generate entries in .fixup for relocatable addresses.  */
1141
#define RELOCATABLE_NEEDS_FIXUP 1
1142
 
1143
/* This target uses the sysv4.opt file.  */
1144
#define TARGET_USES_SYSV4_OPT 1

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.