Subversion Repositories openrisc

;; DFA scheduling description for SH4.

;; Copyright (C) 2004, 2007 Free Software Foundation, Inc.

;; This file is part of GCC.

;; GCC is free software; you can redistribute it and/or modify

;; it under the terms of the GNU General Public License as published by

;; the Free Software Foundation; either version 3, or (at your option)

;; any later version.

;; GCC is distributed in the hope that it will be useful,

;; but WITHOUT ANY WARRANTY; without even the implied warranty of

;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License

;; along with GCC; see the file COPYING3.  If not see

;; .

;; Load and store instructions save a cycle if they are aligned on a

;; four byte boundary.  Using a function unit for stores encourages

;; gcc to separate load and store instructions by one instruction,

;; which makes it more likely that the linker will be able to word

;; align them when relaxing.

;; The following description models the SH4 pipeline using the DFA based

;; scheduler.  The DFA based description is better way to model a

;; superscalar pipeline as compared to function unit reservation model.

;; 1. The function unit based model is oriented to describe at most one

;;    unit reservation by each insn. It is difficult to model unit reservations

;;    in multiple pipeline units by same insn.  This can be done using DFA

;;    based description.

;; 2. The execution performance of DFA based scheduler does not depend on

;;    processor complexity.

;; 3. Writing all unit reservations for an instruction class is a more natural

;;    description of the pipeline and makes the interface to the hazard

;;    recognizer simpler than the old function unit based model.

;; 4. The DFA model is richer and is a part of greater overall framework

;;    of RCSP.

;; Two automata are defined to reduce number of states

;; which a single large automaton will have. (Factoring)

(define_automaton "inst_pipeline,fpu_pipe")

;; This unit is basically the decode unit of the processor.

;; Since SH4 is a dual issue machine,it is as if there are two

;; units so that any insn can be processed by either one

;; of the decoding unit.

(define_cpu_unit "pipe_01,pipe_02" "inst_pipeline")

;; The fixed point arithmetic calculator(?? EX Unit).

(define_cpu_unit  "int" "inst_pipeline")

;; f1_1 and f1_2 are floating point units.Actually there is

;; a f1 unit which can overlap with other f1 unit but

;; not another F1 unit.It is as though there were two

;; f1 units.

(define_cpu_unit "f1_1,f1_2" "fpu_pipe")

;; The floating point units (except FS - F2 always precedes it.)

(define_cpu_unit "F0,F1,F2,F3" "fpu_pipe")

;; This is basically the MA unit of SH4

;; used in LOAD/STORE pipeline.

(define_cpu_unit "memory" "inst_pipeline")

;; However, there are LS group insns that don't use it, even ones that

;; complete in 0 cycles.  So we use an extra unit for the issue of LS insns.

(define_cpu_unit "load_store" "inst_pipeline")

;; The address calculator used for branch instructions.

;; This will be reserved after "issue" of branch instructions

;; and this is to make sure that no two branch instructions

;; can be issued in parallel.

(define_cpu_unit "pcr_addrcalc" "inst_pipeline")

;; ----------------------------------------------------

;; This reservation is to simplify the dual issue description.

(define_reservation  "issue"  "pipe_01|pipe_02")

;; This is to express the locking of D stage.

;; Note that the issue of a CO group insn also effectively locks the D stage.

(define_reservation  "d_lock" "pipe_01+pipe_02")

;; Every FE instruction but fipr / ftrv starts with issue and this.

(define_reservation "F01" "F0+F1")

;; This is to simplify description where F1,F2,FS

;; are used simultaneously.

(define_reservation "fpu" "F1+F2")

;; This is to highlight the fact that f1

;; cannot overlap with F1.

(exclusion_set  "f1_1,f1_2" "F1")

(define_insn_reservation "nil" 0 (eq_attr "type" "nil") "nothing")

;; Although reg moves have a latency of zero

;; we need to highlight that they use D stage

;; for one cycle.

;; Group:       MT

(define_insn_reservation "reg_mov" 0

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "move"))

  "issue")

;; Group:       LS

(define_insn_reservation "freg_mov" 0

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "fmove"))

  "issue+load_store")

;; We don't model all pipeline stages; we model the issue ('D') stage

;; inasmuch as we allow only two instructions to issue simultaneously,

;; and CO instructions prevent any simultaneous issue of another instruction.

;; (This uses pipe_01 and pipe_02).

;; Double issue of EX insns is prevented by using the int unit in the EX stage.

;; Double issue of EX / BR insns is prevented by using the int unit /

;; pcr_addrcalc unit in the EX stage.

;; Double issue of BR / LS instructions is prevented by using the

;; pcr_addrcalc / load_store unit in the issue cycle.

;; Double issue of FE instructions is prevented by using F0 in the first

;; pipeline stage after the first D stage.

;; There is no need to describe the [ES]X / [MN]A / S stages after a D stage

;; (except in the cases outlined above), nor to describe the FS stage after

;; the F2 stage.

;; Other MT  group instructions(1 step operations)

;; Group:       MT

;; Latency:     1

;; Issue Rate:  1

(define_insn_reservation "mt" 1

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "mt_group"))

  "issue")

;; Fixed Point Arithmetic Instructions(1 step operations)

;; Group:       EX

;; Latency:     1

;; Issue Rate:  1

(define_insn_reservation "sh4_simple_arith" 1

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "insn_class" "ex_group"))

  "issue,int")

;; Load and store instructions have no alignment peculiarities for the SH4,

;; but they use the load-store unit, which they share with the fmove type

;; insns (fldi[01]; fmov frn,frm; flds; fsts; fabs; fneg) .

;; Loads have a latency of two.

;; However, call insns can only paired with a preceding insn, and have

;; a delay slot, so that we want two more insns to be scheduled between the

;; load of the function address and the call.  This is equivalent to a

;; latency of three.

;; ADJUST_COST can only properly handle reductions of the cost, so we

;; use a latency of three here, which gets multiplied by 10 to yield 30.

;; We only do this for SImode loads of general registers, to make the work

;; for ADJUST_COST easier.

;; Load Store instructions. (MOV.[BWL]@(d,GBR)

;; Group:       LS

;; Latency:     2

;; Issue Rate:  1

(define_insn_reservation "sh4_load" 2

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "load,pcload"))

  "issue+load_store,nothing,memory")

;; calls / sfuncs need an extra instruction for their delay slot.

;; Moreover, estimating the latency for SImode loads as 3 will also allow

;; adjust_cost to meaningfully bump it back up to 3 if they load the shift

;; count of a dynamic shift.

(define_insn_reservation "sh4_load_si" 3

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "load_si,pcload_si"))

  "issue+load_store,nothing,memory")

;; (define_bypass 2 "sh4_load_si" "!sh4_call")

;; The load latency is upped to three higher if the dependent insn does

;; double precision computation.  We want the 'default' latency to reflect

;; that increased latency because otherwise the insn priorities won't

;; allow proper scheduling.

(define_insn_reservation "sh4_fload" 3

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "fload,pcfload"))

  "issue+load_store,nothing,memory")

;; (define_bypass 2 "sh4_fload" "!")

(define_insn_reservation "sh4_store" 1

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "store"))

  "issue+load_store,nothing,memory")

;; Load Store instructions.

;; Group:       LS

;; Latency:     1

;; Issue Rate:  1

(define_insn_reservation "sh4_gp_fpul" 1

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "gp_fpul"))

  "issue+load_store")

;; Load Store instructions.

;; Group:       LS

;; Latency:     3

;; Issue Rate:  1

(define_insn_reservation "sh4_fpul_gp" 3

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "fpul_gp"))

  "issue+load_store")

;; Branch (BF,BF/S,BT,BT/S,BRA)

;; Group:       BR

;; Latency when taken:  2 (or 1)

;; Issue Rate:  1

;; The latency is 1 when displacement is 0.

;; We can't really do much with the latency, even if we could express it,

;; but the pairing restrictions are useful to take into account.

;; ??? If the branch is likely, we might want to fill the delay slot;

;; if the branch is likely, but not very likely, should we pretend to use

;; a resource that CO instructions use, to get a pairable delay slot insn?

(define_insn_reservation "sh4_branch"  1

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "cbranch,jump"))

  "issue+pcr_addrcalc")

;; Branch Far (JMP,RTS,BRAF)

;; Group:       CO

;; Latency:     3

;; Issue Rate:  2

;; ??? Scheduling happens before branch shortening, and hence jmp and braf

;; can't be distinguished from bra for the "jump" pattern.

(define_insn_reservation "sh4_return" 3

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "return,jump_ind"))

         "d_lock*2")

;; RTE

;; Group:       CO

;; Latency:     5

;; Issue Rate:  5

;; this instruction can be executed in any of the pipelines

;; and blocks the pipeline for next 4 stages.

(define_insn_reservation "sh4_return_from_exp" 5

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "rte"))

  "d_lock*5")

;; OCBP, OCBWB

;; Group:       CO

;; Latency:     1-5

;; Issue Rate:  1

;; cwb is used for the sequence ocbwb @%0; extu.w %0,%2; or %1,%2; mov.l %0,@%2

;; ocbwb on its own would be "d_lock,nothing,memory*5"

(define_insn_reservation "ocbwb"  6

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "cwb"))

  "d_lock*2,(d_lock+memory)*3,issue+load_store+memory,memory*2")

;; LDS to PR,JSR

;; Group:       CO

;; Latency:     3

;; Issue Rate:  2

;; The SX stage is blocked for last 2 cycles.

;; OTOH, the only time that has an effect for insns generated by the compiler

;; is when lds to PR is followed by sts from PR - and that is highly unlikely -

;; or when we are doing a function call - and we don't do inter-function

;; scheduling.  For the function call case, it's really best that we end with

;; something that models an rts.

(define_insn_reservation "sh4_lds_to_pr" 3

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "prset") )

  "d_lock*2")

;; calls introduce a longisch delay that is likely to flush the pipelines

;; of the caller's instructions.  Ordinary functions tend to end with a

;; load to restore a register (in the delay slot of rts), while sfuncs

;; tend to end with an EX or MT insn.  But that is not actually relevant,

;; since there are no instructions that contend for memory access early.

;; We could, of course, provide exact scheduling information for specific

;; sfuncs, if that should prove useful.

(define_insn_reservation "sh4_call" 16

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "call,sfunc"))

  "d_lock*16")

;; LDS.L to PR

;; Group:       CO

;; Latency:     3

;; Issue Rate:  2

;; The SX unit is blocked for last 2 cycles.

(define_insn_reservation "ldsmem_to_pr"  3

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "pload"))

  "d_lock*2")

;; STS from PR

;; Group:       CO

;; Latency:     2

;; Issue Rate:  2

;; The SX unit in second and third cycles.

(define_insn_reservation "sts_from_pr" 2

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "prget"))

  "d_lock*2")

;; STS.L from PR

;; Group:       CO

;; Latency:     2

;; Issue Rate:  2

(define_insn_reservation "sh4_prstore_mem" 2

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "pstore"))

  "d_lock*2,nothing,memory")

;; LDS to FPSCR

;; Group:       CO

;; Latency:     4

;; Issue Rate:  1

;; F1 is blocked for last three cycles.

(define_insn_reservation "fpscr_load" 4

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "gp_fpscr"))

  "d_lock,nothing,F1*3")

;; LDS.L to FPSCR

;; Group:       CO

;; Latency:     1 / 4

;; Latency to update Rn is 1 and latency to update FPSCR is 4

;; Issue Rate:  1

;; F1 is blocked for last three cycles.

(define_insn_reservation "fpscr_load_mem" 4

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type"  "mem_fpscr"))

  "d_lock,nothing,(F1+memory),F1*2")

;; Fixed point multiplication (DMULS.L DMULU.L MUL.L MULS.W,MULU.W)

;; Group:       CO

;; Latency:     4 / 4

;; Issue Rate:  1

(define_insn_reservation "multi" 4

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "smpy,dmpy"))

  "d_lock,(d_lock+f1_1),(f1_1|f1_2)*3,F2")

;; Fixed STS from MACL / MACH

;; Group:       CO

;; Latency:     3

;; Issue Rate:  1

(define_insn_reservation "sh4_mac_gp" 3

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "mac_gp"))

  "d_lock")

;; Single precision floating point computation FCMP/EQ,

;; FCMP/GT, FADD, FLOAT, FMAC, FMUL, FSUB, FTRC, FRVHG, FSCHG

;; Group:       FE

;; Latency:     3/4

;; Issue Rate:  1

(define_insn_reservation "fp_arith"  3

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "fp"))

  "issue,F01,F2")

(define_insn_reservation "fp_arith_ftrc"  3

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "ftrc_s"))

  "issue,F01,F2")

(define_bypass 1 "fp_arith_ftrc" "sh4_fpul_gp")

;; Single Precision FDIV/SQRT

;; Group:       FE

;; Latency:     12/13 (FDIV); 11/12 (FSQRT)

;; Issue Rate:  1

;; We describe fdiv here; fsqrt is actually one cycle faster.

(define_insn_reservation "fp_div" 12

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "fdiv"))

  "issue,F01+F3,F2+F3,F3*7,F1+F3,F2")

;; Double Precision floating point computation

;; (FCNVDS, FCNVSD, FLOAT, FTRC)

;; Group:       FE

;; Latency:     (3,4)/5

;; Issue Rate:  1

(define_insn_reservation "dp_float" 4

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "dfp_conv"))

  "issue,F01,F1+F2,F2")

;; Double-precision floating-point (FADD,FMUL,FSUB)

;; Group:       FE

;; Latency:     (7,8)/9

;; Issue Rate:  1

(define_insn_reservation "fp_double_arith" 8

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "dfp_arith"))

  "issue,F01,F1+F2,fpu*4,F2")

;; Double-precision FCMP (FCMP/EQ,FCMP/GT)

;; Group:       CO

;; Latency:     3/5

;; Issue Rate:  2

(define_insn_reservation "fp_double_cmp" 3

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "dfp_cmp"))

  "d_lock,(d_lock+F01),F1+F2,F2")

;; Double precision FDIV/SQRT

;; Group:       FE

;; Latency:     (24,25)/26

;; Issue Rate:  1

(define_insn_reservation "dp_div" 25

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "dfdiv"))

  "issue,F01+F3,F1+F2+F3,F2+F3,F3*16,F1+F3,(fpu+F3)*2,F2")

;; Use the branch-not-taken case to model arith3 insns.  For the branch taken

;; case, we'd get a d_lock instead of issue at the end.

(define_insn_reservation "arith3" 3

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "arith3"))

  "issue,d_lock+pcr_addrcalc,issue")

;; arith3b insns schedule the same no matter if the branch is taken or not.

(define_insn_reservation "arith3b" 2

  (and (eq_attr "pipe_model" "sh4")

       (eq_attr "type" "arith3"))

  "issue,d_lock+pcr_addrcalc")