URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gcc-4.2.2/] [gcc/] [config/] [sparc/] [lb1spc.asm] - Blame information for rev 816

Details | Compare with Previous | View Log


/* This is an assembly language implementation of mulsi3, divsi3, and modsi3
   for the sparc processor.
 
   These routines are derived from the SPARC Architecture Manual, version 8,
   slightly edited to match the desired calling convention, and also to
   optimize them for our purposes.  */
 
#ifdef L_mulsi3
.text
        .align 4
        .global .umul
        .proc 4
.umul:
        or      %o0, %o1, %o4   ! logical or of multiplier and multiplicand
        mov     %o0, %y         ! multiplier to Y register
        andncc  %o4, 0xfff, %o5 ! mask out lower 12 bits
        be      mul_shortway    ! can do it the short way
        andcc   %g0, %g0, %o4   ! zero the partial product and clear NV cc
        !
        ! long multiply
        !
        mulscc  %o4, %o1, %o4   ! first iteration of 33
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4   ! 32nd iteration
        mulscc  %o4, %g0, %o4   ! last iteration only shifts
        ! the upper 32 bits of product are wrong, but we do not care
        retl
        rd      %y, %o0
        !
        ! short multiply
        !
mul_shortway:
        mulscc  %o4, %o1, %o4   ! first iteration of 13
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4
        mulscc  %o4, %o1, %o4   ! 12th iteration
        mulscc  %o4, %g0, %o4   ! last iteration only shifts
        rd      %y, %o5
        sll     %o4, 12, %o4    ! left shift partial product by 12 bits
        srl     %o5, 20, %o5    ! right shift partial product by 20 bits
        retl
        or      %o5, %o4, %o0   ! merge for true product
#endif
 
#ifdef L_divsi3
/*
 * Division and remainder, from Appendix E of the SPARC Version 8
 * Architecture Manual, with fixes from Gordon Irlam.
 */
 
/*
 * Input: dividend and divisor in %o0 and %o1 respectively.
 *
 * m4 parameters:
 *  .div        name of function to generate
 *  div         div=div => %o0 / %o1; div=rem => %o0 % %o1
 *  true                true=true => signed; true=false => unsigned
 *
 * Algorithm parameters:
 *  N           how many bits per iteration we try to get (4)
 *  WORDSIZE    total number of bits (32)
 *
 * Derived constants:
 *  TOPBITS     number of bits in the top decade of a number
 *
 * Important variables:
 *  Q           the partial quotient under development (initially 0)
 *  R           the remainder so far, initially the dividend
 *  ITER        number of main division loop iterations required;
 *              equal to ceil(log2(quotient) / N).  Note that this
 *              is the log base (2^N) of the quotient.
 *  V           the current comparand, initially divisor*2^(ITER*N-1)
 *
 * Cost:
 *  Current estimate for non-large dividend is
 *      ceil(log2(quotient) / N) * (10 + 7N/2) + C
 *  A large dividend is one greater than 2^(31-TOPBITS) and takes a
 *  different path, as the upper bits of the quotient must be developed
 *  one bit at a time.
 */
        .global .udiv
        .align 4
        .proc 4
        .text
.udiv:
         b ready_to_divide
         mov 0, %g3             ! result is always positive
 
        .global .div
        .align 4
        .proc 4
        .text
.div:
        ! compute sign of result; if neither is negative, no problem
        orcc    %o1, %o0, %g0   ! either negative?
        bge     ready_to_divide ! no, go do the divide
        xor     %o1, %o0, %g3   ! compute sign in any case
        tst     %o1
        bge     1f
        tst     %o0
        ! %o1 is definitely negative; %o0 might also be negative
        bge     ready_to_divide ! if %o0 not negative...
        sub     %g0, %o1, %o1   ! in any case, make %o1 nonneg
1:      ! %o0 is negative, %o1 is nonnegative
        sub     %g0, %o0, %o0   ! make %o0 nonnegative
 
 
ready_to_divide:
 
        ! Ready to divide.  Compute size of quotient; scale comparand.
        orcc    %o1, %g0, %o5
        bne     1f
        mov     %o0, %o3
 
        ! Divide by zero trap.  If it returns, return 0 (about as
        ! wrong as possible, but that is what SunOS does...).
        ta      0x2             ! ST_DIV0
        retl
        clr     %o0
 
1:
        cmp     %o3, %o5                ! if %o1 exceeds %o0, done
        blu     got_result              ! (and algorithm fails otherwise)
        clr     %o2
        sethi   %hi(1 << (32 - 4 - 1)), %g1
        cmp     %o3, %g1
        blu     not_really_big
        clr     %o4
 
        ! Here the dividend is >= 2**(31-N) or so.  We must be careful here,
        ! as our usual N-at-a-shot divide step will cause overflow and havoc.
        ! The number of bits in the result here is N*ITER+SC, where SC <= N.
        ! Compute ITER in an unorthodox manner: know we need to shift V into
        ! the top decade: so do not even bother to compare to R.
        1:
                cmp     %o5, %g1
                bgeu    3f
                mov     1, %g2
                sll     %o5, 4, %o5
                b       1b
                add     %o4, 1, %o4
 
        ! Now compute %g2.
        2:      addcc   %o5, %o5, %o5
                bcc     not_too_big
                add     %g2, 1, %g2
 
                ! We get here if the %o1 overflowed while shifting.
                ! This means that %o3 has the high-order bit set.
                ! Restore %o5 and subtract from %o3.
                sll     %g1, 4, %g1     ! high order bit
                srl     %o5, 1, %o5     ! rest of %o5
                add     %o5, %g1, %o5
                b       do_single_div
                sub     %g2, 1, %g2
 
        not_too_big:
        3:      cmp     %o5, %o3
                blu     2b
                nop
                be      do_single_div
                nop
        /* NB: these are commented out in the V8-SPARC manual as well */
        /* (I do not understand this) */
        ! %o5 > %o3: went too far: back up 1 step
        !       srl     %o5, 1, %o5
        !       dec     %g2
        ! do single-bit divide steps
        !
        ! We have to be careful here.  We know that %o3 >= %o5, so we can do the
        ! first divide step without thinking.  BUT, the others are conditional,
        ! and are only done if %o3 >= 0.  Because both %o3 and %o5 may have the high-
        ! order bit set in the first step, just falling into the regular
        ! division loop will mess up the first time around.
        ! So we unroll slightly...
        do_single_div:
                subcc   %g2, 1, %g2
                bl      end_regular_divide
                nop
                sub     %o3, %o5, %o3
                mov     1, %o2
                b       end_single_divloop
                nop
        single_divloop:
                sll     %o2, 1, %o2
                bl      1f
                srl     %o5, 1, %o5
                ! %o3 >= 0
                sub     %o3, %o5, %o3
                b       2f
                add     %o2, 1, %o2
        1:      ! %o3 < 0
                add     %o3, %o5, %o3
                sub     %o2, 1, %o2
        2:
        end_single_divloop:
                subcc   %g2, 1, %g2
                bge     single_divloop
                tst     %o3
                b,a     end_regular_divide
 
not_really_big:
1:
        sll     %o5, 4, %o5
        cmp     %o5, %o3
        bleu    1b
        addcc   %o4, 1, %o4
        be      got_result
        sub     %o4, 1, %o4
 
        tst     %o3     ! set up for initial iteration
divloop:
        sll     %o2, 4, %o2
        ! depth 1, accumulated bits 0
        bl      L1.16
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        ! depth 2, accumulated bits 1
        bl      L2.17
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        ! depth 3, accumulated bits 3
        bl      L3.19
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        ! depth 4, accumulated bits 7
        bl      L4.23
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        b       9f
        add     %o2, (7*2+1), %o2
 
L4.23:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        b       9f
        add     %o2, (7*2-1), %o2
 
 
L3.19:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        ! depth 4, accumulated bits 5
        bl      L4.21
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        b       9f
        add     %o2, (5*2+1), %o2
 
L4.21:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        b       9f
        add     %o2, (5*2-1), %o2
 
L2.17:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        ! depth 3, accumulated bits 1
        bl      L3.17
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        ! depth 4, accumulated bits 3
        bl      L4.19
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        b       9f
        add     %o2, (3*2+1), %o2
 
L4.19:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        b       9f
        add     %o2, (3*2-1), %o2
 
L3.17:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        ! depth 4, accumulated bits 1
        bl      L4.17
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        b       9f
        add     %o2, (1*2+1), %o2
 
L4.17:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        b       9f
        add     %o2, (1*2-1), %o2
 
L1.16:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        ! depth 2, accumulated bits -1
        bl      L2.15
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        ! depth 3, accumulated bits -1
        bl      L3.15
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        ! depth 4, accumulated bits -1
        bl      L4.15
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        b       9f
        add     %o2, (-1*2+1), %o2
 
L4.15:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        b       9f
        add     %o2, (-1*2-1), %o2
 
L3.15:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        ! depth 4, accumulated bits -3
        bl      L4.13
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        b       9f
        add     %o2, (-3*2+1), %o2
 
L4.13:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        b       9f
        add     %o2, (-3*2-1), %o2
 
L2.15:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        ! depth 3, accumulated bits -3
        bl      L3.13
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        ! depth 4, accumulated bits -5
        bl      L4.11
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        b       9f
        add     %o2, (-5*2+1), %o2
 
L4.11:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        b       9f
        add     %o2, (-5*2-1), %o2
 
L3.13:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        ! depth 4, accumulated bits -7
        bl      L4.9
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        b       9f
        add     %o2, (-7*2+1), %o2
 
L4.9:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        b       9f
        add     %o2, (-7*2-1), %o2
 
        9:
end_regular_divide:
        subcc   %o4, 1, %o4
        bge     divloop
        tst     %o3
        bl,a    got_result
        ! non-restoring fixup here (one instruction only!)
        sub     %o2, 1, %o2
 
 
got_result:
        ! check to see if answer should be < 0
        tst     %g3
        bl,a    1f
        sub %g0, %o2, %o2
1:
        retl
        mov %o2, %o0
#endif
 
#ifdef L_modsi3
/* This implementation was taken from glibc:
 *
 * Input: dividend and divisor in %o0 and %o1 respectively.
 *
 * Algorithm parameters:
 *  N           how many bits per iteration we try to get (4)
 *  WORDSIZE    total number of bits (32)
 *
 * Derived constants:
 *  TOPBITS     number of bits in the top decade of a number
 *
 * Important variables:
 *  Q           the partial quotient under development (initially 0)
 *  R           the remainder so far, initially the dividend
 *  ITER        number of main division loop iterations required;
 *              equal to ceil(log2(quotient) / N).  Note that this
 *              is the log base (2^N) of the quotient.
 *  V           the current comparand, initially divisor*2^(ITER*N-1)
 *
 * Cost:
 *  Current estimate for non-large dividend is
 *      ceil(log2(quotient) / N) * (10 + 7N/2) + C
 *  A large dividend is one greater than 2^(31-TOPBITS) and takes a
 *  different path, as the upper bits of the quotient must be developed
 *  one bit at a time.
 */
.text
        .align 4
        .global .urem
        .proc 4
.urem:
        b       divide
        mov     0, %g3          ! result always positive
 
        .align 4
        .global .rem
        .proc 4
.rem:
        ! compute sign of result; if neither is negative, no problem
        orcc    %o1, %o0, %g0   ! either negative?
        bge     2f                      ! no, go do the divide
        mov     %o0, %g3                ! sign of remainder matches %o0
        tst     %o1
        bge     1f
        tst     %o0
        ! %o1 is definitely negative; %o0 might also be negative
        bge     2f                      ! if %o0 not negative...
        sub     %g0, %o1, %o1   ! in any case, make %o1 nonneg
1:      ! %o0 is negative, %o1 is nonnegative
        sub     %g0, %o0, %o0   ! make %o0 nonnegative
2:
 
        ! Ready to divide.  Compute size of quotient; scale comparand.
divide:
        orcc    %o1, %g0, %o5
        bne     1f
        mov     %o0, %o3
 
                ! Divide by zero trap.  If it returns, return 0 (about as
                ! wrong as possible, but that is what SunOS does...).
                ta      0x2   !ST_DIV0
                retl
                clr     %o0
 
1:
        cmp     %o3, %o5                ! if %o1 exceeds %o0, done
        blu     got_result              ! (and algorithm fails otherwise)
        clr     %o2
        sethi   %hi(1 << (32 - 4 - 1)), %g1
        cmp     %o3, %g1
        blu     not_really_big
        clr     %o4
 
        ! Here the dividend is >= 2**(31-N) or so.  We must be careful here,
        ! as our usual N-at-a-shot divide step will cause overflow and havoc.
        ! The number of bits in the result here is N*ITER+SC, where SC <= N.
        ! Compute ITER in an unorthodox manner: know we need to shift V into
        ! the top decade: so do not even bother to compare to R.
        1:
                cmp     %o5, %g1
                bgeu    3f
                mov     1, %g2
                sll     %o5, 4, %o5
                b       1b
                add     %o4, 1, %o4
 
        ! Now compute %g2.
        2:      addcc   %o5, %o5, %o5
                bcc     not_too_big
                add     %g2, 1, %g2
 
                ! We get here if the %o1 overflowed while shifting.
                ! This means that %o3 has the high-order bit set.
                ! Restore %o5 and subtract from %o3.
                sll     %g1, 4, %g1     ! high order bit
                srl     %o5, 1, %o5             ! rest of %o5
                add     %o5, %g1, %o5
                b       do_single_div
                sub     %g2, 1, %g2
 
        not_too_big:
        3:      cmp     %o5, %o3
                blu     2b
                nop
                be      do_single_div
                nop
        /* NB: these are commented out in the V8-SPARC manual as well */
        /* (I do not understand this) */
        ! %o5 > %o3: went too far: back up 1 step
        !       srl     %o5, 1, %o5
        !       dec     %g2
        ! do single-bit divide steps
        !
        ! We have to be careful here.  We know that %o3 >= %o5, so we can do the
        ! first divide step without thinking.  BUT, the others are conditional,
        ! and are only done if %o3 >= 0.  Because both %o3 and %o5 may have the high-
        ! order bit set in the first step, just falling into the regular
        ! division loop will mess up the first time around.
        ! So we unroll slightly...
        do_single_div:
                subcc   %g2, 1, %g2
                bl      end_regular_divide
                nop
                sub     %o3, %o5, %o3
                mov     1, %o2
                b       end_single_divloop
                nop
        single_divloop:
                sll     %o2, 1, %o2
                bl      1f
                srl     %o5, 1, %o5
                ! %o3 >= 0
                sub     %o3, %o5, %o3
                b       2f
                add     %o2, 1, %o2
        1:      ! %o3 < 0
                add     %o3, %o5, %o3
                sub     %o2, 1, %o2
        2:
        end_single_divloop:
                subcc   %g2, 1, %g2
                bge     single_divloop
                tst     %o3
                b,a     end_regular_divide
 
not_really_big:
1:
        sll     %o5, 4, %o5
        cmp     %o5, %o3
        bleu    1b
        addcc   %o4, 1, %o4
        be      got_result
        sub     %o4, 1, %o4
 
        tst     %o3     ! set up for initial iteration
divloop:
        sll     %o2, 4, %o2
                ! depth 1, accumulated bits 0
        bl      L1.16
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        ! depth 2, accumulated bits 1
        bl      L2.17
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        ! depth 3, accumulated bits 3
        bl      L3.19
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        ! depth 4, accumulated bits 7
        bl      L4.23
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        b       9f
        add     %o2, (7*2+1), %o2
L4.23:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        b       9f
        add     %o2, (7*2-1), %o2
 
L3.19:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        ! depth 4, accumulated bits 5
        bl      L4.21
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        b       9f
        add     %o2, (5*2+1), %o2
 
L4.21:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        b       9f
        add     %o2, (5*2-1), %o2
 
L2.17:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        ! depth 3, accumulated bits 1
        bl      L3.17
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        ! depth 4, accumulated bits 3
        bl      L4.19
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        b       9f
        add     %o2, (3*2+1), %o2
 
L4.19:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        b       9f
        add     %o2, (3*2-1), %o2
 
L3.17:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        ! depth 4, accumulated bits 1
        bl      L4.17
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        b       9f
        add     %o2, (1*2+1), %o2
 
L4.17:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        b       9f
        add     %o2, (1*2-1), %o2
 
L1.16:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        ! depth 2, accumulated bits -1
        bl      L2.15
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        ! depth 3, accumulated bits -1
        bl      L3.15
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        ! depth 4, accumulated bits -1
        bl      L4.15
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        b       9f
        add     %o2, (-1*2+1), %o2
 
L4.15:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        b       9f
        add     %o2, (-1*2-1), %o2
 
L3.15:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        ! depth 4, accumulated bits -3
        bl      L4.13
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        b       9f
        add     %o2, (-3*2+1), %o2
 
L4.13:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        b       9f
        add     %o2, (-3*2-1), %o2
 
L2.15:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        ! depth 3, accumulated bits -3
        bl      L3.13
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        ! depth 4, accumulated bits -5
        bl      L4.11
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        b       9f
        add     %o2, (-5*2+1), %o2
 
L4.11:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        b       9f
        add     %o2, (-5*2-1), %o2
 
L3.13:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        ! depth 4, accumulated bits -7
        bl      L4.9
        srl     %o5,1,%o5
        ! remainder is positive
        subcc   %o3,%o5,%o3
        b       9f
        add     %o2, (-7*2+1), %o2
 
L4.9:
        ! remainder is negative
        addcc   %o3,%o5,%o3
        b       9f
        add     %o2, (-7*2-1), %o2
 
        9:
end_regular_divide:
        subcc   %o4, 1, %o4
        bge     divloop
        tst     %o3
        bl,a    got_result
        ! non-restoring fixup here (one instruction only!)
        add     %o3, %o1, %o3
 
got_result:
        ! check to see if answer should be < 0
        tst     %g3
        bl,a    1f
        sub %g0, %o3, %o3
1:
        retl
        mov %o3, %o0
 
#endif
 

Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gcc-4.2.2/] [gcc/] [config/] [sparc/] [lb1spc.asm] - Blame information for rev 816

Line No.	Rev	Author	Line
1	38	julius	`/* This is an assembly language implementation of mulsi3, divsi3, and modsi3`
2			`for the sparc processor.`
3
4			`These routines are derived from the SPARC Architecture Manual, version 8,`
5			`slightly edited to match the desired calling convention, and also to`
6			`optimize them for our purposes. */`
7
8			`#ifdef L_mulsi3`
9			`.text`
10			`.align 4`
11			`.global .umul`
12			`.proc 4`
13			`.umul:`
14			`or %o0, %o1, %o4 ! logical or of multiplier and multiplicand`
15			`mov %o0, %y ! multiplier to Y register`
16			`andncc %o4, 0xfff, %o5 ! mask out lower 12 bits`
17			`be mul_shortway ! can do it the short way`
18			`andcc %g0, %g0, %o4 ! zero the partial product and clear NV cc`
19			`!`
20			`! long multiply`
21			`!`
22			`mulscc %o4, %o1, %o4 ! first iteration of 33`
23			`mulscc %o4, %o1, %o4`
24			`mulscc %o4, %o1, %o4`
25			`mulscc %o4, %o1, %o4`
26			`mulscc %o4, %o1, %o4`
27			`mulscc %o4, %o1, %o4`
28			`mulscc %o4, %o1, %o4`
29			`mulscc %o4, %o1, %o4`
30			`mulscc %o4, %o1, %o4`
31			`mulscc %o4, %o1, %o4`
32			`mulscc %o4, %o1, %o4`
33			`mulscc %o4, %o1, %o4`
34			`mulscc %o4, %o1, %o4`
35			`mulscc %o4, %o1, %o4`
36			`mulscc %o4, %o1, %o4`
37			`mulscc %o4, %o1, %o4`
38			`mulscc %o4, %o1, %o4`
39			`mulscc %o4, %o1, %o4`
40			`mulscc %o4, %o1, %o4`
41			`mulscc %o4, %o1, %o4`
42			`mulscc %o4, %o1, %o4`
43			`mulscc %o4, %o1, %o4`
44			`mulscc %o4, %o1, %o4`
45			`mulscc %o4, %o1, %o4`
46			`mulscc %o4, %o1, %o4`
47			`mulscc %o4, %o1, %o4`
48			`mulscc %o4, %o1, %o4`
49			`mulscc %o4, %o1, %o4`
50			`mulscc %o4, %o1, %o4`
51			`mulscc %o4, %o1, %o4`
52			`mulscc %o4, %o1, %o4`
53			`mulscc %o4, %o1, %o4 ! 32nd iteration`
54			`mulscc %o4, %g0, %o4 ! last iteration only shifts`
55			`! the upper 32 bits of product are wrong, but we do not care`
56			`retl`
57			`rd %y, %o0`
58			`!`
59			`! short multiply`
60			`!`
61			`mul_shortway:`
62			`mulscc %o4, %o1, %o4 ! first iteration of 13`
63			`mulscc %o4, %o1, %o4`
64			`mulscc %o4, %o1, %o4`
65			`mulscc %o4, %o1, %o4`
66			`mulscc %o4, %o1, %o4`
67			`mulscc %o4, %o1, %o4`
68			`mulscc %o4, %o1, %o4`
69			`mulscc %o4, %o1, %o4`
70			`mulscc %o4, %o1, %o4`
71			`mulscc %o4, %o1, %o4`
72			`mulscc %o4, %o1, %o4`
73			`mulscc %o4, %o1, %o4 ! 12th iteration`
74			`mulscc %o4, %g0, %o4 ! last iteration only shifts`
75			`rd %y, %o5`
76			`sll %o4, 12, %o4 ! left shift partial product by 12 bits`
77			`srl %o5, 20, %o5 ! right shift partial product by 20 bits`
78			`retl`
79			`or %o5, %o4, %o0 ! merge for true product`
80			`#endif`
81
82			`#ifdef L_divsi3`
83			`/*`
84			`* Division and remainder, from Appendix E of the SPARC Version 8`
85			`* Architecture Manual, with fixes from Gordon Irlam.`
86			`*/`
87
88			`/*`
89			`* Input: dividend and divisor in %o0 and %o1 respectively.`
90			`*`
91			`* m4 parameters:`
92			`* .div name of function to generate`
93			`* div div=div => %o0 / %o1; div=rem => %o0 % %o1`
94			`* true true=true => signed; true=false => unsigned`
95			`*`
96			`* Algorithm parameters:`
97			`* N how many bits per iteration we try to get (4)`
98			`* WORDSIZE total number of bits (32)`
99			`*`
100			`* Derived constants:`
101			`* TOPBITS number of bits in the top decade of a number`
102			`*`
103			`* Important variables:`
104			`* Q the partial quotient under development (initially 0)`
105			`* R the remainder so far, initially the dividend`
106			`* ITER number of main division loop iterations required;`
107			`* equal to ceil(log2(quotient) / N). Note that this`
108			`* is the log base (2^N) of the quotient.`
109			`* V the current comparand, initially divisor2^(ITERN-1)`
110			`*`
111			`* Cost:`
112			`* Current estimate for non-large dividend is`
113			`* ceil(log2(quotient) / N) * (10 + 7N/2) + C`
114			`* A large dividend is one greater than 2^(31-TOPBITS) and takes a`
115			`* different path, as the upper bits of the quotient must be developed`
116			`* one bit at a time.`
117			`*/`
118			`.global .udiv`
119			`.align 4`
120			`.proc 4`
121			`.text`
122			`.udiv:`
123			`b ready_to_divide`
124			`mov 0, %g3 ! result is always positive`
125
126			`.global .div`
127			`.align 4`
128			`.proc 4`
129			`.text`
130			`.div:`
131			`! compute sign of result; if neither is negative, no problem`
132			`orcc %o1, %o0, %g0 ! either negative?`
133			`bge ready_to_divide ! no, go do the divide`
134			`xor %o1, %o0, %g3 ! compute sign in any case`
135			`tst %o1`
136			`bge 1f`
137			`tst %o0`
138			`! %o1 is definitely negative; %o0 might also be negative`
139			`bge ready_to_divide ! if %o0 not negative...`
140			`sub %g0, %o1, %o1 ! in any case, make %o1 nonneg`
141			`1: ! %o0 is negative, %o1 is nonnegative`
142			`sub %g0, %o0, %o0 ! make %o0 nonnegative`
143
144
145			`ready_to_divide:`
146
147			`! Ready to divide. Compute size of quotient; scale comparand.`
148			`orcc %o1, %g0, %o5`
149			`bne 1f`
150			`mov %o0, %o3`
151
152			`! Divide by zero trap. If it returns, return 0 (about as`
153			`! wrong as possible, but that is what SunOS does...).`
154			`ta 0x2 ! ST_DIV0`
155			`retl`
156			`clr %o0`
157
158			`1:`
159			`cmp %o3, %o5 ! if %o1 exceeds %o0, done`
160			`blu got_result ! (and algorithm fails otherwise)`
161			`clr %o2`
162			`sethi %hi(1 << (32 - 4 - 1)), %g1`
163			`cmp %o3, %g1`
164			`blu not_really_big`
165			`clr %o4`
166
167			`! Here the dividend is >= 2**(31-N) or so. We must be careful here,`
168			`! as our usual N-at-a-shot divide step will cause overflow and havoc.`
169			`! The number of bits in the result here is N*ITER+SC, where SC <= N.`
170			`! Compute ITER in an unorthodox manner: know we need to shift V into`
171			`! the top decade: so do not even bother to compare to R.`
172			`1:`
173			`cmp %o5, %g1`
174			`bgeu 3f`
175			`mov 1, %g2`
176			`sll %o5, 4, %o5`
177			`b 1b`
178			`add %o4, 1, %o4`
179
180			`! Now compute %g2.`
181			`2: addcc %o5, %o5, %o5`
182			`bcc not_too_big`
183			`add %g2, 1, %g2`
184
185			`! We get here if the %o1 overflowed while shifting.`
186			`! This means that %o3 has the high-order bit set.`
187			`! Restore %o5 and subtract from %o3.`
188			`sll %g1, 4, %g1 ! high order bit`
189			`srl %o5, 1, %o5 ! rest of %o5`
190			`add %o5, %g1, %o5`
191			`b do_single_div`
192			`sub %g2, 1, %g2`
193
194			`not_too_big:`
195			`3: cmp %o5, %o3`
196			`blu 2b`
197			`nop`
198			`be do_single_div`
199			`nop`
200			`/* NB: these are commented out in the V8-SPARC manual as well */`
201			`/* (I do not understand this) */`
202			`! %o5 > %o3: went too far: back up 1 step`
203			`! srl %o5, 1, %o5`
204			`! dec %g2`
205			`! do single-bit divide steps`
206			`!`
207			`! We have to be careful here. We know that %o3 >= %o5, so we can do the`
208			`! first divide step without thinking. BUT, the others are conditional,`
209			`! and are only done if %o3 >= 0. Because both %o3 and %o5 may have the high-`
210			`! order bit set in the first step, just falling into the regular`
211			`! division loop will mess up the first time around.`
212			`! So we unroll slightly...`
213			`do_single_div:`
214			`subcc %g2, 1, %g2`
215			`bl end_regular_divide`
216			`nop`
217			`sub %o3, %o5, %o3`
218			`mov 1, %o2`
219			`b end_single_divloop`
220			`nop`
221			`single_divloop:`
222			`sll %o2, 1, %o2`
223			`bl 1f`
224			`srl %o5, 1, %o5`
225			`! %o3 >= 0`
226			`sub %o3, %o5, %o3`
227			`b 2f`
228			`add %o2, 1, %o2`
229			`1: ! %o3 < 0`
230			`add %o3, %o5, %o3`
231			`sub %o2, 1, %o2`
232			`2:`
233			`end_single_divloop:`
234			`subcc %g2, 1, %g2`
235			`bge single_divloop`
236			`tst %o3`
237			`b,a end_regular_divide`
238
239			`not_really_big:`
240			`1:`
241			`sll %o5, 4, %o5`
242			`cmp %o5, %o3`
243			`bleu 1b`
244			`addcc %o4, 1, %o4`
245			`be got_result`
246			`sub %o4, 1, %o4`
247
248			`tst %o3 ! set up for initial iteration`
249			`divloop:`
250			`sll %o2, 4, %o2`
251			`! depth 1, accumulated bits 0`
252			`bl L1.16`
253			`srl %o5,1,%o5`
254			`! remainder is positive`
255			`subcc %o3,%o5,%o3`
256			`! depth 2, accumulated bits 1`
257			`bl L2.17`
258			`srl %o5,1,%o5`
259			`! remainder is positive`
260			`subcc %o3,%o5,%o3`
261			`! depth 3, accumulated bits 3`
262			`bl L3.19`
263			`srl %o5,1,%o5`
264			`! remainder is positive`
265			`subcc %o3,%o5,%o3`
266			`! depth 4, accumulated bits 7`
267			`bl L4.23`
268			`srl %o5,1,%o5`
269			`! remainder is positive`
270			`subcc %o3,%o5,%o3`
271			`b 9f`
272			`add %o2, (7*2+1), %o2`
273
274			`L4.23:`
275			`! remainder is negative`
276			`addcc %o3,%o5,%o3`
277			`b 9f`
278			`add %o2, (7*2-1), %o2`
279
280
281			`L3.19:`
282			`! remainder is negative`
283			`addcc %o3,%o5,%o3`
284			`! depth 4, accumulated bits 5`
285			`bl L4.21`
286			`srl %o5,1,%o5`
287			`! remainder is positive`
288			`subcc %o3,%o5,%o3`
289			`b 9f`
290			`add %o2, (5*2+1), %o2`
291
292			`L4.21:`
293			`! remainder is negative`
294			`addcc %o3,%o5,%o3`
295			`b 9f`
296			`add %o2, (5*2-1), %o2`
297
298			`L2.17:`
299			`! remainder is negative`
300			`addcc %o3,%o5,%o3`
301			`! depth 3, accumulated bits 1`
302			`bl L3.17`
303			`srl %o5,1,%o5`
304			`! remainder is positive`
305			`subcc %o3,%o5,%o3`
306			`! depth 4, accumulated bits 3`
307			`bl L4.19`
308			`srl %o5,1,%o5`
309			`! remainder is positive`
310			`subcc %o3,%o5,%o3`
311			`b 9f`
312			`add %o2, (3*2+1), %o2`
313
314			`L4.19:`
315			`! remainder is negative`
316			`addcc %o3,%o5,%o3`
317			`b 9f`
318			`add %o2, (3*2-1), %o2`
319
320			`L3.17:`
321			`! remainder is negative`
322			`addcc %o3,%o5,%o3`
323			`! depth 4, accumulated bits 1`
324			`bl L4.17`
325			`srl %o5,1,%o5`
326			`! remainder is positive`
327			`subcc %o3,%o5,%o3`
328			`b 9f`
329			`add %o2, (1*2+1), %o2`
330
331			`L4.17:`
332			`! remainder is negative`
333			`addcc %o3,%o5,%o3`
334			`b 9f`
335			`add %o2, (1*2-1), %o2`
336
337			`L1.16:`
338			`! remainder is negative`
339			`addcc %o3,%o5,%o3`
340			`! depth 2, accumulated bits -1`
341			`bl L2.15`
342			`srl %o5,1,%o5`
343			`! remainder is positive`
344			`subcc %o3,%o5,%o3`
345			`! depth 3, accumulated bits -1`
346			`bl L3.15`
347			`srl %o5,1,%o5`
348			`! remainder is positive`
349			`subcc %o3,%o5,%o3`
350			`! depth 4, accumulated bits -1`
351			`bl L4.15`
352			`srl %o5,1,%o5`
353			`! remainder is positive`
354			`subcc %o3,%o5,%o3`
355			`b 9f`
356			`add %o2, (-1*2+1), %o2`
357
358			`L4.15:`
359			`! remainder is negative`
360			`addcc %o3,%o5,%o3`
361			`b 9f`
362			`add %o2, (-1*2-1), %o2`
363
364			`L3.15:`
365			`! remainder is negative`
366			`addcc %o3,%o5,%o3`
367			`! depth 4, accumulated bits -3`
368			`bl L4.13`
369			`srl %o5,1,%o5`
370			`! remainder is positive`
371			`subcc %o3,%o5,%o3`
372			`b 9f`
373			`add %o2, (-3*2+1), %o2`
374
375			`L4.13:`
376			`! remainder is negative`
377			`addcc %o3,%o5,%o3`
378			`b 9f`
379			`add %o2, (-3*2-1), %o2`
380
381			`L2.15:`
382			`! remainder is negative`
383			`addcc %o3,%o5,%o3`
384			`! depth 3, accumulated bits -3`
385			`bl L3.13`
386			`srl %o5,1,%o5`
387			`! remainder is positive`
388			`subcc %o3,%o5,%o3`
389			`! depth 4, accumulated bits -5`
390			`bl L4.11`
391			`srl %o5,1,%o5`
392			`! remainder is positive`
393			`subcc %o3,%o5,%o3`
394			`b 9f`
395			`add %o2, (-5*2+1), %o2`
396
397			`L4.11:`
398			`! remainder is negative`
399			`addcc %o3,%o5,%o3`
400			`b 9f`
401			`add %o2, (-5*2-1), %o2`
402
403			`L3.13:`
404			`! remainder is negative`
405			`addcc %o3,%o5,%o3`
406			`! depth 4, accumulated bits -7`
407			`bl L4.9`
408			`srl %o5,1,%o5`
409			`! remainder is positive`
410			`subcc %o3,%o5,%o3`
411			`b 9f`
412			`add %o2, (-7*2+1), %o2`
413
414			`L4.9:`
415			`! remainder is negative`
416			`addcc %o3,%o5,%o3`
417			`b 9f`
418			`add %o2, (-7*2-1), %o2`
419
420			`9:`
421			`end_regular_divide:`
422			`subcc %o4, 1, %o4`
423			`bge divloop`
424			`tst %o3`
425			`bl,a got_result`
426			`! non-restoring fixup here (one instruction only!)`
427			`sub %o2, 1, %o2`
428
429
430			`got_result:`
431			`! check to see if answer should be < 0`
432			`tst %g3`
433			`bl,a 1f`
434			`sub %g0, %o2, %o2`
435			`1:`
436			`retl`
437			`mov %o2, %o0`
438			`#endif`
439
440			`#ifdef L_modsi3`
441			`/* This implementation was taken from glibc:`
442			`*`
443			`* Input: dividend and divisor in %o0 and %o1 respectively.`
444			`*`
445			`* Algorithm parameters:`
446			`* N how many bits per iteration we try to get (4)`
447			`* WORDSIZE total number of bits (32)`
448			`*`
449			`* Derived constants:`
450			`* TOPBITS number of bits in the top decade of a number`
451			`*`
452			`* Important variables:`
453			`* Q the partial quotient under development (initially 0)`
454			`* R the remainder so far, initially the dividend`
455			`* ITER number of main division loop iterations required;`
456			`* equal to ceil(log2(quotient) / N). Note that this`
457			`* is the log base (2^N) of the quotient.`
458			`* V the current comparand, initially divisor2^(ITERN-1)`
459			`*`
460			`* Cost:`
461			`* Current estimate for non-large dividend is`
462			`* ceil(log2(quotient) / N) * (10 + 7N/2) + C`
463			`* A large dividend is one greater than 2^(31-TOPBITS) and takes a`
464			`* different path, as the upper bits of the quotient must be developed`
465			`* one bit at a time.`
466			`*/`
467			`.text`
468			`.align 4`
469			`.global .urem`
470			`.proc 4`
471			`.urem:`
472			`b divide`
473			`mov 0, %g3 ! result always positive`
474
475			`.align 4`
476			`.global .rem`
477			`.proc 4`
478			`.rem:`
479			`! compute sign of result; if neither is negative, no problem`
480			`orcc %o1, %o0, %g0 ! either negative?`
481			`bge 2f ! no, go do the divide`
482			`mov %o0, %g3 ! sign of remainder matches %o0`
483			`tst %o1`
484			`bge 1f`
485			`tst %o0`
486			`! %o1 is definitely negative; %o0 might also be negative`
487			`bge 2f ! if %o0 not negative...`
488			`sub %g0, %o1, %o1 ! in any case, make %o1 nonneg`
489			`1: ! %o0 is negative, %o1 is nonnegative`
490			`sub %g0, %o0, %o0 ! make %o0 nonnegative`
491			`2:`
492
493			`! Ready to divide. Compute size of quotient; scale comparand.`
494			`divide:`
495			`orcc %o1, %g0, %o5`
496			`bne 1f`
497			`mov %o0, %o3`
498
499			`! Divide by zero trap. If it returns, return 0 (about as`
500			`! wrong as possible, but that is what SunOS does...).`
501			`ta 0x2 !ST_DIV0`
502			`retl`
503			`clr %o0`
504
505			`1:`
506			`cmp %o3, %o5 ! if %o1 exceeds %o0, done`
507			`blu got_result ! (and algorithm fails otherwise)`
508			`clr %o2`
509			`sethi %hi(1 << (32 - 4 - 1)), %g1`
510			`cmp %o3, %g1`
511			`blu not_really_big`
512			`clr %o4`
513
514			`! Here the dividend is >= 2**(31-N) or so. We must be careful here,`
515			`! as our usual N-at-a-shot divide step will cause overflow and havoc.`
516			`! The number of bits in the result here is N*ITER+SC, where SC <= N.`
517			`! Compute ITER in an unorthodox manner: know we need to shift V into`
518			`! the top decade: so do not even bother to compare to R.`
519			`1:`
520			`cmp %o5, %g1`
521			`bgeu 3f`
522			`mov 1, %g2`
523			`sll %o5, 4, %o5`
524			`b 1b`
525			`add %o4, 1, %o4`
526
527			`! Now compute %g2.`
528			`2: addcc %o5, %o5, %o5`
529			`bcc not_too_big`
530			`add %g2, 1, %g2`
531
532			`! We get here if the %o1 overflowed while shifting.`
533			`! This means that %o3 has the high-order bit set.`
534			`! Restore %o5 and subtract from %o3.`
535			`sll %g1, 4, %g1 ! high order bit`
536			`srl %o5, 1, %o5 ! rest of %o5`
537			`add %o5, %g1, %o5`
538			`b do_single_div`
539			`sub %g2, 1, %g2`
540
541			`not_too_big:`
542			`3: cmp %o5, %o3`
543			`blu 2b`
544			`nop`
545			`be do_single_div`
546			`nop`
547			`/* NB: these are commented out in the V8-SPARC manual as well */`
548			`/* (I do not understand this) */`
549			`! %o5 > %o3: went too far: back up 1 step`
550			`! srl %o5, 1, %o5`
551			`! dec %g2`
552			`! do single-bit divide steps`
553			`!`
554			`! We have to be careful here. We know that %o3 >= %o5, so we can do the`
555			`! first divide step without thinking. BUT, the others are conditional,`
556			`! and are only done if %o3 >= 0. Because both %o3 and %o5 may have the high-`
557			`! order bit set in the first step, just falling into the regular`
558			`! division loop will mess up the first time around.`
559			`! So we unroll slightly...`
560			`do_single_div:`
561			`subcc %g2, 1, %g2`
562			`bl end_regular_divide`
563			`nop`
564			`sub %o3, %o5, %o3`
565			`mov 1, %o2`
566			`b end_single_divloop`
567			`nop`
568			`single_divloop:`
569			`sll %o2, 1, %o2`
570			`bl 1f`
571			`srl %o5, 1, %o5`
572			`! %o3 >= 0`
573			`sub %o3, %o5, %o3`
574			`b 2f`
575			`add %o2, 1, %o2`
576			`1: ! %o3 < 0`
577			`add %o3, %o5, %o3`
578			`sub %o2, 1, %o2`
579			`2:`
580			`end_single_divloop:`
581			`subcc %g2, 1, %g2`
582			`bge single_divloop`
583			`tst %o3`
584			`b,a end_regular_divide`
585
586			`not_really_big:`
587			`1:`
588			`sll %o5, 4, %o5`
589			`cmp %o5, %o3`
590			`bleu 1b`
591			`addcc %o4, 1, %o4`
592			`be got_result`
593			`sub %o4, 1, %o4`
594
595			`tst %o3 ! set up for initial iteration`
596			`divloop:`
597			`sll %o2, 4, %o2`
598			`! depth 1, accumulated bits 0`
599			`bl L1.16`
600			`srl %o5,1,%o5`
601			`! remainder is positive`
602			`subcc %o3,%o5,%o3`
603			`! depth 2, accumulated bits 1`
604			`bl L2.17`
605			`srl %o5,1,%o5`
606			`! remainder is positive`
607			`subcc %o3,%o5,%o3`
608			`! depth 3, accumulated bits 3`
609			`bl L3.19`
610			`srl %o5,1,%o5`
611			`! remainder is positive`
612			`subcc %o3,%o5,%o3`
613			`! depth 4, accumulated bits 7`
614			`bl L4.23`
615			`srl %o5,1,%o5`
616			`! remainder is positive`
617			`subcc %o3,%o5,%o3`
618			`b 9f`
619			`add %o2, (7*2+1), %o2`
620			`L4.23:`
621			`! remainder is negative`
622			`addcc %o3,%o5,%o3`
623			`b 9f`
624			`add %o2, (7*2-1), %o2`
625
626			`L3.19:`
627			`! remainder is negative`
628			`addcc %o3,%o5,%o3`
629			`! depth 4, accumulated bits 5`
630			`bl L4.21`
631			`srl %o5,1,%o5`
632			`! remainder is positive`
633			`subcc %o3,%o5,%o3`
634			`b 9f`
635			`add %o2, (5*2+1), %o2`
636
637			`L4.21:`
638			`! remainder is negative`
639			`addcc %o3,%o5,%o3`
640			`b 9f`
641			`add %o2, (5*2-1), %o2`
642
643			`L2.17:`
644			`! remainder is negative`
645			`addcc %o3,%o5,%o3`
646			`! depth 3, accumulated bits 1`
647			`bl L3.17`
648			`srl %o5,1,%o5`
649			`! remainder is positive`
650			`subcc %o3,%o5,%o3`
651			`! depth 4, accumulated bits 3`
652			`bl L4.19`
653			`srl %o5,1,%o5`
654			`! remainder is positive`
655			`subcc %o3,%o5,%o3`
656			`b 9f`
657			`add %o2, (3*2+1), %o2`
658
659			`L4.19:`
660			`! remainder is negative`
661			`addcc %o3,%o5,%o3`
662			`b 9f`
663			`add %o2, (3*2-1), %o2`
664
665			`L3.17:`
666			`! remainder is negative`
667			`addcc %o3,%o5,%o3`
668			`! depth 4, accumulated bits 1`
669			`bl L4.17`
670			`srl %o5,1,%o5`
671			`! remainder is positive`
672			`subcc %o3,%o5,%o3`
673			`b 9f`
674			`add %o2, (1*2+1), %o2`
675
676			`L4.17:`
677			`! remainder is negative`
678			`addcc %o3,%o5,%o3`
679			`b 9f`
680			`add %o2, (1*2-1), %o2`
681
682			`L1.16:`
683			`! remainder is negative`
684			`addcc %o3,%o5,%o3`
685			`! depth 2, accumulated bits -1`
686			`bl L2.15`
687			`srl %o5,1,%o5`
688			`! remainder is positive`
689			`subcc %o3,%o5,%o3`
690			`! depth 3, accumulated bits -1`
691			`bl L3.15`
692			`srl %o5,1,%o5`
693			`! remainder is positive`
694			`subcc %o3,%o5,%o3`
695			`! depth 4, accumulated bits -1`
696			`bl L4.15`
697			`srl %o5,1,%o5`
698			`! remainder is positive`
699			`subcc %o3,%o5,%o3`
700			`b 9f`
701			`add %o2, (-1*2+1), %o2`
702
703			`L4.15:`
704			`! remainder is negative`
705			`addcc %o3,%o5,%o3`
706			`b 9f`
707			`add %o2, (-1*2-1), %o2`
708
709			`L3.15:`
710			`! remainder is negative`
711			`addcc %o3,%o5,%o3`
712			`! depth 4, accumulated bits -3`
713			`bl L4.13`
714			`srl %o5,1,%o5`
715			`! remainder is positive`
716			`subcc %o3,%o5,%o3`
717			`b 9f`
718			`add %o2, (-3*2+1), %o2`
719
720			`L4.13:`
721			`! remainder is negative`
722			`addcc %o3,%o5,%o3`
723			`b 9f`
724			`add %o2, (-3*2-1), %o2`
725
726			`L2.15:`
727			`! remainder is negative`
728			`addcc %o3,%o5,%o3`
729			`! depth 3, accumulated bits -3`
730			`bl L3.13`
731			`srl %o5,1,%o5`
732			`! remainder is positive`
733			`subcc %o3,%o5,%o3`
734			`! depth 4, accumulated bits -5`
735			`bl L4.11`
736			`srl %o5,1,%o5`
737			`! remainder is positive`
738			`subcc %o3,%o5,%o3`
739			`b 9f`
740			`add %o2, (-5*2+1), %o2`
741
742			`L4.11:`
743			`! remainder is negative`
744			`addcc %o3,%o5,%o3`
745			`b 9f`
746			`add %o2, (-5*2-1), %o2`
747
748			`L3.13:`
749			`! remainder is negative`
750			`addcc %o3,%o5,%o3`
751			`! depth 4, accumulated bits -7`
752			`bl L4.9`
753			`srl %o5,1,%o5`
754			`! remainder is positive`
755			`subcc %o3,%o5,%o3`
756			`b 9f`
757			`add %o2, (-7*2+1), %o2`
758
759			`L4.9:`
760			`! remainder is negative`
761			`addcc %o3,%o5,%o3`
762			`b 9f`
763			`add %o2, (-7*2-1), %o2`
764
765			`9:`
766			`end_regular_divide:`
767			`subcc %o4, 1, %o4`
768			`bge divloop`
769			`tst %o3`
770			`bl,a got_result`
771			`! non-restoring fixup here (one instruction only!)`
772			`add %o3, %o1, %o3`
773
774			`got_result:`
775			`! check to see if answer should be < 0`
776			`tst %g3`
777			`bl,a 1f`
778			`sub %g0, %o3, %o3`
779			`1:`
780			`retl`
781			`mov %o3, %o0`
782
783			`#endif`
784