OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gcc-4.2.2/] [gcc/] [config.gcc] - Blame information for rev 853

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 38 julius
# GCC target-specific configuration file.
2
# Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
3
# Free Software Foundation, Inc.
4
 
5
#This file is part of GCC.
6
 
7
#GCC is free software; you can redistribute it and/or modify it under
8
#the terms of the GNU General Public License as published by the Free
9
#Software Foundation; either version 3, or (at your option) any later
10
#version.
11
 
12
#GCC is distributed in the hope that it will be useful, but WITHOUT
13
#ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14
#FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
15
#for more details.
16
 
17
#You should have received a copy of the GNU General Public License
18
#along with GCC; see the file COPYING3.  If not see
19
#.
20
 
21
# This is the GCC target-specific configuration file
22
# where a configuration type is mapped to different system-specific
23
# definitions and files.  This is invoked by the autoconf-generated
24
# configure script.  Putting it in a separate shell file lets us skip
25
# running autoconf when modifying target-specific information.
26
 
27
# This file switches on the shell variable ${target}, and also uses the
28
# following shell variables:
29
#
30
#  with_*               Various variables as set by configure.
31
#
32
#  enable_threads       Either the name, yes or no depending on whether
33
#                       threads support was requested.
34
#
35
#  default_use_cxa_atexit
36
#                         The default value for the $enable___cxa_atexit
37
#                       variable.  enable___cxa_atexit needs to be set to
38
#                       "yes" for the correct operation of C++ destructors
39
#                       but it relies upon the presence of a non-standard C
40
#                       library function called __cxa_atexit.
41
#                         Since not all C libraries provide __cxa_atexit the
42
#                       default value of $default_use_cxa_atexit is set to
43
#                       "no" except for targets which are known to be OK.
44
#
45
#  gas_flag             Either yes or no depending on whether GNU as was
46
#                       requested.
47
#
48
#  gnu_ld_flag          Either yes or no depending on whether GNU ld was
49
#                       requested.
50
 
51
# This file sets the following shell variables for use by the
52
# autoconf-generated configure script:
53
#
54
#  cpu_type             The name of the cpu, if different from the first
55
#                       chunk of the canonical target name.
56
#
57
#  tm_defines           List of target macros to define for all compilations.
58
#
59
#  tm_file              A list of target macro files, if different from
60
#                       "$cpu_type/$cpu_type.h". Usually it's constructed
61
#                       per target in a way like this:
62
#                       tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
63
#                       Note that the preferred order is:
64
#                       - specific target header "${cpu_type}/${cpu_type.h}"
65
#                       - generic headers like dbxelf.h elfos.h, etc.
66
#                       - specializing target headers like ${cpu_type.h}/elf.h
67
#                       This helps to keep OS specific stuff out of the CPU
68
#                       defining header ${cpu_type}/${cpu_type.h}.
69
#
70
#  tm_p_file            Location of file with declarations for functions
71
#                       in $out_file.
72
#
73
#  out_file             The name of the machine description C support
74
#                       file, if different from "$cpu_type/$cpu_type.c".
75
#
76
#  md_file              The name of the machine-description file, if
77
#                       different from "$cpu_type/$cpu_type.md".
78
#
79
#  tmake_file           A list of machine-description-specific
80
#                       makefile-fragments, if different from
81
#                       "$cpu_type/t-$cpu_type".
82
#
83
#  extra_modes          The name of the file containing a list of extra
84
#                       machine modes, if necessary and different from
85
#                       "$cpu_type/$cpu_type-modes.def".
86
#
87
#  extra_objs           List of extra objects that should be linked into
88
#                       the compiler proper (cc1, cc1obj, cc1plus)
89
#                       depending on target.
90
#
91
#  extra_gcc_objs       List of extra objects that should be linked into
92
#                       the compiler driver (gcc) depending on target.
93
#
94
#  extra_headers        List of used header files from the directory
95
#                       config/${cpu_type}.
96
#
97
#  extra_passes         List of extra executables compiled for this target
98
#                       machine, used for compiling from source to object.
99
#
100
#  extra_parts          List of extra object files that should be compiled
101
#                       for this target machine.
102
#
103
#  extra_programs       Like extra_passes, but these are used when linking.
104
#
105
#  extra_options        List of target-dependent .opt files.
106
#
107
#  c_target_objs        List of extra target-dependent objects that be
108
#                       linked into the C compiler only.
109
#
110
#  cxx_target_objs      List of extra target-dependent objects that be
111
#                       linked into the C++ compiler only.
112
#
113
#  target_gtfiles       List of extra source files with type information.
114
#
115
#  xm_defines           List of macros to define when compiling for the
116
#                       target machine.
117
#
118
#  xm_file              List of files to include when compiling for the
119
#                       target machine.
120
#
121
#  use_collect2         Set to yes or no, depending on whether collect2
122
#                       will be used.
123
#
124
#  target_cpu_default   Set to override the default target model.
125
#
126
#  gdb_needs_out_file_path
127
#                       Set to yes if gdb needs a dir command with
128
#                       `dirname $out_file`.
129
#
130
#  thread_file          Set to control which thread package to use.
131
#
132
#  gas                  Set to yes or no depending on whether the target
133
#                       system normally uses GNU as.
134
#
135
#  need_64bit_hwint     Set to yes if HOST_WIDE_INT must be 64 bits wide
136
#                       for this target.  This is true iff this target
137
#                       supports "long" or "wchar_t" wider than 32 bits.
138
#
139
#  configure_default_options
140
#                       Set to an initializer for configure_default_options
141
#                       in configargs.h, based on --with-cpu et cetera.
142
#
143
#  use_fixproto         Set to "yes" if fixproto should be run normally,
144
#                       "no" if fixproto should never be run.
145
 
146
# The following variables are used in each case-construct to build up the
147
# outgoing variables:
148
#
149
#  gnu_ld               Set to yes or no depending on whether the target
150
#                       system normally uses GNU ld.
151
 
152
out_file=
153
tmake_file=
154
extra_headers=
155
extra_passes=
156
extra_parts=
157
extra_programs=
158
extra_objs=
159
extra_gcc_objs=
160
extra_options=
161
c_target_objs=
162
cxx_target_objs=
163
tm_defines=
164
xm_defines=
165
# Set this to force installation and use of collect2.
166
use_collect2=
167
# Set this to override the default target model.
168
target_cpu_default=
169
# Set this if gdb needs a dir command with `dirname $out_file`
170
gdb_needs_out_file_path=
171
# Set this to control which thread package will be used.
172
thread_file=
173
# Reinitialize these from the flag values every loop pass, since some
174
# configure entries modify them.
175
gas="$gas_flag"
176
gnu_ld="$gnu_ld_flag"
177
default_use_cxa_atexit=no
178
target_gtfiles=
179
need_64bit_hwint=
180
 
181
# Default to not using fixproto.  Targets which need fixproto should
182
# specifically set this to 'yes'.
183
use_fixproto=no
184
 
185
# Don't carry these over build->host->target.  Please.
186
xm_file=
187
md_file=
188
 
189
# Obsolete configurations.
190
case ${target} in
191
   c4x-*                \
192
 | tic4x-*              \
193
 )
194
    if test "x$enable_obsolete" != xyes; then
195
      echo "*** Configuration ${target} is obsolete." >&2
196
      echo "*** Specify --enable-obsolete to build it anyway." >&2
197
      echo "*** Support will be REMOVED in the next major release of GCC," >&2
198
      echo "*** unless a maintainer comes forward." >&2
199
      exit 1
200
    fi;;
201
esac
202
 
203
# Unsupported targets list.  Do not put an entry in this list unless
204
# it would otherwise be caught by a more permissive pattern.  The list
205
# should be in alphabetical order.
206
case ${target} in
207
   alpha*-*-linux*libc1*                \
208
 | i[34567]86-sequent-sysv              \
209
 | i[34567]86-sequent-sysv[123]*        \
210
 | i[34567]86-go32-*                    \
211
 | i[34567]86-*-go32*                   \
212
 | m68k-*-linux*aout*                   \
213
 | m68k-*-linux*libc1*                  \
214
 | mips64orion*-*-rtems*                \
215
 | powerpc-*-linux*libc1*               \
216
 | sparc-*-linux*aout*                  \
217
 | sparc-*-linux*libc1*                 \
218
 | sparc-hal-solaris2*                  \
219
 | thumb-*-*                            \
220
 | *-*-linux*coff*                      \
221
 | *-*-linux*oldld*                     \
222
 | *-*-rtemsaout*                       \
223
 | *-*-rtemscoff*                       \
224
 | vax-*-vms*                           \
225
 )
226
        echo "*** Configuration ${target} not supported" 1>&2
227
        exit 1
228
        ;;
229
esac
230
 
231
# Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
232
# updated in each machine entry.  Also set default extra_headers for some
233
# machines.
234
tm_p_file=
235
cpu_type=`echo ${target} | sed 's/-.*$//'`
236
cpu_is_64bit=
237
case ${target} in
238
m32c*-*-*)
239
        cpu_type=m32c
240
        tmake_file=m32c/t-m32c
241
        ;;
242
alpha*-*-*)
243
        cpu_type=alpha
244
        need_64bit_hwint=yes
245
        ;;
246
am33_2.0-*-linux*)
247
        cpu_type=mn10300
248
        ;;
249
strongarm*-*-*)
250
        cpu_type=arm
251
        ;;
252
arm*-*-*)
253
        cpu_type=arm
254
        extra_headers="mmintrin.h"
255
        ;;
256
bfin*-*)
257
        cpu_type=bfin
258
        ;;
259
ep9312*-*-*)
260
        cpu_type=arm
261
        ;;
262
frv*)   cpu_type=frv
263
        ;;
264
xscale-*-*)
265
        cpu_type=arm
266
        extra_headers="mmintrin.h"
267
        ;;
268
i[34567]86-*-*)
269
        cpu_type=i386
270
        extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h pmmintrin.h"
271
        ;;
272
x86_64-*-*)
273
        cpu_type=i386
274
        extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h pmmintrin.h"
275
        need_64bit_hwint=yes
276
        ;;
277
ia64-*-*)
278
        extra_headers=ia64intrin.h
279
        need_64bit_hwint=yes
280
        ;;
281
hppa*-*-* | parisc*-*-*)
282
        cpu_type=pa
283
        ;;
284
m32r*-*-*)
285
        cpu_type=m32r
286
        ;;
287
m680[012]0-*-*)
288
        cpu_type=m68k
289
        extra_headers=math-68881.h
290
        ;;
291
m68k-*-*)
292
        extra_headers=math-68881.h
293
        ;;
294
mips*-*-*)
295
        cpu_type=mips
296
        need_64bit_hwint=yes
297
        ;;
298 177 jeremybenn
or32-*-*)
299
        cpu_type=or32
300
        ;;
301 38 julius
powerpc*-*-*)
302
        cpu_type=rs6000
303
        extra_headers="ppc-asm.h altivec.h spe.h"
304
        need_64bit_hwint=yes
305
        case x$with_cpu in
306
            xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[3456]|xrs64a)
307
                cpu_is_64bit=yes
308
                ;;
309
        esac
310
        ;;
311
rs6000*-*-*)
312
        need_64bit_hwint=yes
313
        ;;
314
score*-*-*)
315
        cpu_type=score
316
        ;;
317
sparc64*-*-*)
318
        cpu_type=sparc
319
        need_64bit_hwint=yes
320
        ;;
321
sparc*-*-*)
322
        cpu_type=sparc
323
        ;;
324
s390*-*-*)
325
        cpu_type=s390
326
        need_64bit_hwint=yes
327
        ;;
328
# Note the 'l'; we need to be able to match e.g. "shle" or "shl".
329
sh[123456789lbe]*-*-*)
330
        cpu_type=sh
331
        need_64bit_hwint=yes
332
        ;;
333
tic4x-*-*)
334
        cpu_type=c4x
335
        ;;
336
esac
337
 
338
tm_file=${cpu_type}/${cpu_type}.h
339
if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
340
then
341
        tm_p_file=${cpu_type}/${cpu_type}-protos.h
342
fi
343
extra_modes=
344
if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
345
then
346
        extra_modes=${cpu_type}/${cpu_type}-modes.def
347
fi
348
if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
349
then
350
        extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
351
fi
352
 
353
case ${target} in
354
x86_64-*-*)
355
        tm_file="i386/biarch64.h ${tm_file}"
356
        ;;
357
esac
358
 
359
# On a.out targets, we need to use collect2.
360
case ${target} in
361
*-*-*aout*)
362
        use_collect2=yes
363
        ;;
364
esac
365
 
366
# Common parts for widely ported systems.
367
case ${target} in
368
*-*-darwin*)
369
  tm_file="${tm_file} darwin.h"
370
  case ${target} in
371
  *-*-darwin9*)
372
    tm_file="${tm_file} darwin9.h"
373
    ;;
374
  esac
375
  tm_file="${tm_file} ${cpu_type}/darwin.h"
376
  tm_p_file="${tm_p_file} darwin-protos.h"
377
  tmake_file="t-darwin ${cpu_type}/t-darwin t-slibgcc-darwin"
378
  target_gtfiles="\$(srcdir)/config/darwin.c"
379
  extra_options="${extra_options} darwin.opt"
380
  c_target_objs="darwin-c.o"
381
  cxx_target_objs="darwin-c.o"
382
  extra_objs="darwin.o"
383
  default_use_cxa_atexit=yes
384
  case ${enable_threads} in
385
    "" | yes | posix) thread_file='posix' ;;
386
  esac
387
  ;;
388
*-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
389
  # This is the place-holder for the generic a.out configuration
390
  # of FreeBSD.  No actual configuration resides here since
391
  # there was only ever a bare-bones ix86 configuration for
392
  # a.out and it exists solely in the machine-specific section.
393
  # This place-holder must exist to avoid dropping into
394
  # the generic ELF configuration of FreeBSD (i.e. it must be
395
  # ordered before that section).
396
  ;;
397
*-*-freebsd*)
398
  # This is the generic ELF configuration of FreeBSD.  Later
399
  # machine-specific sections may refine and add to this
400
  # configuration.
401
  #
402
  # Due to tm_file entry ordering issues that vary between cpu
403
  # architectures, we only define fbsd_tm_file to allow the
404
  # machine-specific section to dictate the final order of all
405
  # entries of tm_file with the minor exception that components
406
  # of the tm_file set here will always be of the form:
407
  #
408
  # freebsd.h [freebsd-.h ...] freebsd-spec.h freebsd.h
409
  #
410
  # The machine-specific section should not tamper with this
411
  # ordering but may order all other entries of tm_file as it
412
  # pleases around the provided core setting.
413
  gas=yes
414
  gnu_ld=yes
415
  extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
416
  case ${target} in
417
    *-*-freebsd3 | *-*-freebsd[3].*)
418
      tm_defines="${tm_defines} FBSD_MAJOR=3" ;;
419
    *-*-freebsd4 | *-*-freebsd[4].*)
420
      tm_defines="${tm_defines} FBSD_MAJOR=4" ;;
421
    *-*-freebsd5 | *-*-freebsd[5].*)
422
      tm_defines="${tm_defines} FBSD_MAJOR=5" ;;
423
    *-*-freebsd6 | *-*-freebsd[6].*)
424
      tm_defines="${tm_defines} FBSD_MAJOR=6" ;;
425
    *-*-freebsd7 | *-*-freebsd[7].*)
426
      tm_defines="${tm_defines} FBSD_MAJOR=7" ;;
427
    *-*-freebsd8 | *-*-freebsd[8].*)
428
      tm_defines="${tm_defines} FBSD_MAJOR=8" ;;
429
    *-*-freebsd9 | *-*-freebsd[9].*)
430
      tm_defines="${tm_defines} FBSD_MAJOR=9" ;;
431
    *)
432
      echo 'Please update *-*-freebsd* in gcc/config.gcc'
433
      exit 1
434
      ;;
435
  esac
436
  tmake_file="t-slibgcc-elf-ver t-freebsd"
437
  case ${enable_threads} in
438
    no)
439
      fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
440
      ;;
441
    "" | yes | posix)
442
      thread_file='posix'
443
      tmake_file="${tmake_file} t-freebsd-thread"
444
      # Before 5.0, FreeBSD can't bind shared libraries to -lc
445
      # when "optionally" threaded via weak pthread_* checks.
446
      case ${target} in
447
        *-*-freebsd[34] | *-*-freebsd[34].*)
448
          tmake_file="${tmake_file} t-slibgcc-nolc-override"
449
          ;;
450
      esac
451
      ;;
452
    *)
453
      echo 'Unknown thread configuration for FreeBSD'
454
      exit 1
455
      ;;
456
  esac
457
  fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
458
  ;;
459
*-*-linux*libc1* | *-*-linux*aout*)
460
  # Avoid the generic linux case.
461
  ;;
462
*-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
463
  # Must come before *-*-gnu* (because of *-*-linux-gnu* systems).
464
  extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
465
  extra_options="${extra_options} linux.opt"
466
  gas=yes
467
  gnu_ld=yes
468
  case ${enable_threads} in
469
    "" | yes | posix) thread_file='posix' ;;
470
  esac
471
  tmake_file="t-slibgcc-elf-ver t-linux"
472
  case ${target} in
473
    *-*-*uclibc*)
474
      tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
475
      ;;
476
    *)
477
      tm_defines="${tm_defines} UCLIBC_DEFAULT=0"
478
      ;;
479
  esac
480
  # Assume that glibc or uClibc are being used and so __cxa_atexit is provided.
481
  default_use_cxa_atexit=yes
482
  ;;
483
*-*-gnu*)
484
  # On the Hurd, the setup is just about the same on
485
  # each different CPU.  The specific machines that we
486
  # support are matched above and just set $cpu_type.
487
  tm_file="${cpu_type}/gnu.h"
488
  extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
489
  # GNU tools are the only tools.
490
  gas=yes
491
  gnu_ld=yes
492
  # These details are the same as for Linux.
493
  # But here we need a little extra magic.
494
  tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
495
  case ${target} in
496
    alpha*)
497
      tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
498
      ;;
499
    i[34567]86-*-*)
500
      tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}"
501
      ;;
502
  esac
503
  # Assume that glibc is being used and so __cxa_atexit is provided.
504
  default_use_cxa_atexit=yes
505
  ;;
506
*-*-netbsd*)
507
  tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
508
  gas=yes
509
  gnu_ld=yes
510
 
511
  # NetBSD 2.0 and later get POSIX threads enabled by default.
512
  # Allow them to be explicitly enabled on any other version.
513
  case ${enable_threads} in
514
    "")
515
      case ${target} in
516
        *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
517
          thread_file='posix'
518
          tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
519
          ;;
520
      esac
521
      ;;
522
    yes | posix)
523
      thread_file='posix'
524
      tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
525
      ;;
526
  esac
527
 
528
  # NetBSD 1.7 and later are set up to use GCC's crtstuff for
529
  # ELF configurations.  We will clear extra_parts in the
530
  # a.out configurations.
531
  case ${target} in
532
    *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
533
      extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
534
      ;;
535
  esac
536
 
537
  # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
538
  # default (unless overridden by --disable-__cxa_atexit).
539
  case ${target} in
540
    *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
541
      default_use_cxa_atexit=yes
542
      ;;
543
  esac
544
  ;;
545
*-*-openbsd*)
546
  tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
547
  case ${enable_threads} in
548
    yes)
549
      thread_file='posix'
550
      tmake_file="${tmake_file} t-openbsd-thread"
551
      ;;
552
  esac
553
  case ${target} in
554
    *-*-openbsd2.*|*-*-openbsd3.[012])
555
      tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
556
  esac
557
  ;;
558
*-*-rtems*)
559
  case ${enable_threads} in
560
    yes) thread_file='rtems' ;;
561
  esac
562
  ;;
563
*-*-vxworks*)
564
  tmake_file=t-vxworks
565
  tm_file="${tm_file} elfos.h svr4.h"
566
  xm_defines=POSIX
567
  extra_options="${extra_options} vxworks.opt"
568
  case ${enable_threads} in
569
    no) ;;
570
    "" | yes | vxworks) thread_file='vxworks' ;;
571
    *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
572
  esac
573
  ;;
574
*-*-elf)
575
  # Assume that newlib is being used and so __cxa_atexit is provided.
576
  default_use_cxa_atexit=yes
577
  ;;
578
esac
579
 
580
case ${target} in
581
# Support site-specific machine types.
582
*local*)
583
        rest=`echo ${target} | sed -e "s/$cpu_type-//"`
584
        tm_file=${cpu_type}/$rest.h
585
        if test -f $srcdir/config/${cpu_type}/xm-$rest.h
586
        then xm_file=${cpu_type}/xm-$rest.h
587
        fi
588
        if test -f $srcdir/config/${cpu_type}/t-$rest
589
        then tmake_file=${cpu_type}/t-$rest
590
        fi
591
        ;;
592
alpha*-*-unicosmk*)
593
        use_collect2=yes
594
        tm_file="${tm_file} alpha/unicosmk.h"
595
 
596
        # Don't include t-ieee for now because we don't support that yet
597
        # tmake_file="alpha/t-ieee"
598
        tmake_file="alpha/t-unicosmk"
599
        use_fixproto=yes
600
        ;;
601
alpha*-*-linux*)
602
        tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
603
        target_cpu_default="MASK_GAS"
604
        tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee alpha/t-linux"
605
        ;;
606
alpha*-*-gnu*)
607
        target_cpu_default="MASK_GAS"
608
        tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
609
        ;;
610
alpha*-*-freebsd*)
611
        tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
612
        target_cpu_default="MASK_GAS"
613
        tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
614
        extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
615
        ;;
616
alpha*-*-netbsd*)
617
        tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
618
        target_cpu_default="MASK_GAS"
619
        tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
620
        ;;
621
alpha*-*-openbsd*)
622
        tm_defines="${tm_defines} OBSD_NO_DYNAMIC_LIBRARIES OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
623
        tm_file="alpha/alpha.h openbsd.h alpha/openbsd.h"
624
        # default x-alpha is only appropriate for dec-osf.
625
        target_cpu_default="MASK_GAS"
626
        tmake_file="alpha/t-alpha alpha/t-ieee"
627
        ;;
628
alpha*-dec-osf[45]*)
629
        if test x$stabs = xyes
630
        then
631
                tm_file="${tm_file} dbx.h"
632
        fi
633
        if test x$gas != xyes
634
        then
635
                extra_passes="mips-tfile mips-tdump"
636
        fi
637
        use_collect2=yes
638
        tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
639
        tm_file="${tm_file} alpha/osf.h"
640
        extra_headers=va_list.h
641
        case ${target} in
642
          *-*-osf4*)
643
            # Define TARGET_SUPPORT_ARCH except on 4.0a.
644
            case ${target} in
645
                *-*-osf4.0a) ;;
646
                *) tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
647
            esac
648
            ;;
649
          *-*-osf5*)
650
            tm_file="${tm_file} alpha/osf5.h"
651
            tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
652
            ;;
653
        esac
654
        case ${enable_threads} in
655
          "" | yes | posix)
656
            thread_file='posix'
657
            tmake_file="${tmake_file} alpha/t-osf-pthread"
658
            ;;
659
        esac
660
        ;;
661
alpha64-dec-*vms*)
662
        tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
663
        xm_file="alpha/xm-vms.h"
664
        tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee"
665
        prefix=/gnu
666
        local_prefix=/gnu
667
        ;;
668
alpha*-dec-*vms*)
669
        tm_file="${tm_file} alpha/vms.h"
670
        xm_file=alpha/xm-vms.h
671
        tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee"
672
        prefix=/gnu
673
        local_prefix=/gnu
674
        ;;
675
arc-*-elf*)
676
        tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
677
        extra_parts="crtinit.o crtfini.o"
678
        use_fixproto=yes
679
        ;;
680
arm-*-coff* | armel-*-coff*)
681
        tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h"
682
        tmake_file="arm/t-arm arm/t-arm-coff"
683
        ;;
684
arm-semi-aof | armel-semi-aof)
685
        tm_file="arm/semiaof.h arm/aof.h arm/arm.h"
686
        tmake_file="arm/t-arm arm/t-semi"
687
        ;;
688
arm-wrs-vxworks)
689
        tm_file="dbxelf.h elfos.h svr4.h vxworks.h arm/elf.h arm/aout.h arm/arm.h arm/vxworks.h"
690
        tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
691
        ;;
692
arm*-*-freebsd*|strongarm*-*-freebsd*)
693
        tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
694
        tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
695
        ;;
696
arm*-*-netbsdelf*)
697
        tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
698
        tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
699
        ;;
700
arm*-*-netbsd*)
701
        tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
702
        tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
703
        extra_parts=""
704
        use_collect2=yes
705
        ;;
706
arm*-*-linux*)                  # ARM GNU/Linux with ELF
707
        tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
708
        tmake_file="${tmake_file} t-linux arm/t-arm"
709
        case ${target} in
710
        arm*-*-linux-*eabi)
711
            tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
712
            tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi"
713
            # The BPABI long long divmod functions return a 128-bit value in
714
            # registers r0-r3.  Correctly modeling that requires the use of
715
            # TImode.
716
            need_64bit_hwint=yes
717
            # The EABI requires the use of __cxa_atexit.
718
            default_use_cxa_atexit=yes
719
            ;;
720
        *)
721
            tmake_file="$tmake_file arm/t-linux"
722
            ;;
723
        esac
724
        tm_file="$tm_file arm/aout.h arm/arm.h"
725
        ;;
726
arm*-*-uclinux*)                # ARM ucLinux
727
        tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h arm/uclinux-elf.h"
728
        tmake_file="arm/t-arm arm/t-arm-elf"
729
        ;;
730
arm*-*-ecos-elf)
731
        tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
732
        tmake_file="arm/t-arm arm/t-arm-elf"
733
        ;;
734
arm*-*-eabi* | arm*-*-symbianelf* )
735
        # The BPABI long long divmod functions return a 128-bit value in
736
        # registers r0-r3.  Correctly modeling that requires the use of
737
        # TImode.
738
        need_64bit_hwint=yes
739
        default_use_cxa_atexit=yes
740
        tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
741
        tmake_file="arm/t-arm arm/t-arm-elf"
742
        case ${target} in
743
        arm*-*-eabi*)
744
          tmake_file="${tmake_file} arm/t-bpabi"
745
          ;;
746
        arm*-*-symbianelf*)
747
          tm_file="${tm_file} arm/symbian.h"
748
          # We do not include t-bpabi for Symbian OS because the system
749
          # provides its own implementation of the BPABI functions.
750
          tmake_file="${tmake_file} arm/t-symbian"
751
          ;;
752
        esac
753
        tm_file="${tm_file} arm/aout.h arm/arm.h"
754
        ;;
755
arm*-*-rtems*)
756
        tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h"
757
        tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
758
        ;;
759
arm*-*-elf | ep9312-*-elf)
760
        tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
761
        tmake_file="arm/t-arm arm/t-arm-elf"
762
        ;;
763
arm*-wince-pe*)
764
        tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
765
        tmake_file="arm/t-arm arm/t-wince-pe"
766
        extra_options="${extra_options} arm/pe.opt"
767
        extra_objs="pe.o"
768
        ;;
769
arm-*-pe*)
770
        tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h"
771
        tmake_file="arm/t-arm arm/t-pe"
772
        extra_options="${extra_options} arm/pe.opt"
773
        extra_objs="pe.o"
774
        ;;
775
arm*-*-kaos*)
776
        tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-arm.h"
777
        tmake_file="arm/t-arm arm/t-arm-elf"
778
        ;;
779
avr-*-rtems*)
780
        tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h"
781
        tmake_file="avr/t-avr t-rtems avr/t-rtems"
782
        ;;
783
avr-*-*)
784
        tm_file="avr/avr.h dbxelf.h"
785
        use_fixproto=yes
786
        ;;
787
bfin*-elf*)
788
        tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
789
        tmake_file=bfin/t-bfin-elf
790
        use_collect2=no
791
        ;;
792
bfin*-uclinux*)
793
        tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/uclinux.h"
794
        tmake_file=bfin/t-bfin-elf
795
        use_collect2=no
796
        ;;
797
bfin*-rtems*)
798
        tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h"
799
        tmake_file="bfin/t-bfin t-rtems bfin/t-rtems"
800
        ;;
801
bfin*-*)
802
        tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
803
        tmake_file=bfin/t-bfin
804
        use_collect2=no
805
        ;;
806
c4x-*-rtems* | tic4x-*-rtems*)
807
        tmake_file="c4x/t-c4x t-rtems c4x/t-rtems"
808
        tm_file="c4x/c4x.h c4x/rtems.h rtems.h"
809
        c_target_objs="c4x-c.o"
810
        cxx_target_objs="c4x-c.o"
811
        ;;
812
c4x-* | tic4x-*)
813
        tmake_file=c4x/t-c4x
814
        c_target_objs="c4x-c.o"
815
        cxx_target_objs="c4x-c.o"
816
        ;;
817
cris-*-aout)
818
        tm_file="dbxelf.h ${tm_file} cris/aout.h"
819
        gas=yes
820
        tmake_file="cris/t-cris cris/t-aout"
821
        extra_options="${extra_options} cris/aout.opt"
822
        ;;
823
cris-*-elf | cris-*-none)
824
        tm_file="dbxelf.h elfos.h ${tm_file}"
825
        tmake_file="cris/t-cris cris/t-elfmulti"
826
        gas=yes
827
        extra_options="${extra_options} cris/elf.opt"
828
        ;;
829
cris-*-linux*)
830
        tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
831
        # We need to avoid using t-linux, so override default tmake_file
832
        tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
833
        extra_options="${extra_options} cris/linux.opt"
834
        ;;
835
crx-*-elf)
836
        tm_file="elfos.h ${tm_file}"
837
        extra_parts="crtbegin.o crtend.o"
838
        use_collect2=no
839
        ;;
840
fr30-*-elf)
841
        tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
842
        tmake_file=fr30/t-fr30
843
        extra_parts="crti.o crtn.o crtbegin.o crtend.o"
844
        use_fixproto=yes
845
        ;;
846
frv-*-elf)
847
        tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h"
848
        tmake_file=frv/t-frv
849
        use_fixproto=yes
850
        ;;
851
frv-*-*linux*)
852
        tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
853
                 linux.h frv/linux.h frv/frv-abi.h"
854
        tmake_file="${tmake_file} frv/t-frv frv/t-linux"
855
        ;;
856
h8300-*-rtemscoff*)
857
        tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems"
858
        tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h h8300/rtems.h rtems.h"
859
        ;;
860
h8300-*-rtems*)
861
        tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
862
        tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h"
863
        ;;
864
h8300-*-elf*)
865
        tmake_file="h8300/t-h8300 h8300/t-elf"
866
        tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h"
867
        use_fixproto=yes
868
        ;;
869
h8300-*-*)
870
        tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h"
871
        use_fixproto=yes
872
        ;;
873
hppa*64*-*-linux* | parisc*64*-*-linux*)
874
        target_cpu_default="MASK_PA_11|MASK_PA_20"
875
        tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
876
                 pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
877
        tmake_file="${tmake_file} pa/t-linux64"
878
        gas=yes gnu_ld=yes
879
        need_64bit_hwint=yes
880
        ;;
881
hppa*-*-linux* | parisc*-*-linux*)
882
        target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
883
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
884
                 pa/pa32-regs.h pa/pa32-linux.h"
885
        tmake_file="${tmake_file} pa/t-linux"
886
        # Set the libgcc version number
887
        if test x$sjlj = x1; then
888
            tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
889
        else
890
            tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
891
        fi
892
        ;;
893
# port not yet contributed.
894
#hppa*-*-openbsd*)
895
#       target_cpu_default="MASK_PA_11"
896
#       ;;
897
hppa1.1-*-pro*)
898
        target_cpu_default="MASK_PORTABLE_RUNTIME|MASK_NO_SPACE_REGS|MASK_SOFT_FLOAT"
899
        tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h \
900
                 pa/pa-pro-end.h libgloss.h"
901
        tmake_file="pa/t-pro"
902
        ;;
903
hppa1.1-*-osf*)
904
        target_cpu_default="MASK_PA_11"
905
        tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-osf.h"
906
        tmake_file="pa/t-pa"
907
        use_collect2=yes
908
        ;;
909
hppa1.1-*-bsd*)
910
        target_cpu_default="MASK_PA_11"
911
        tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h"
912
        tmake_file="pa/t-pa"
913
        use_collect2=yes
914
        ;;
915
hppa[12]*-*-hpux10*)
916
        case ${target} in
917
        hppa1.1-*-* | hppa2*-*-*)
918
                target_cpu_default="MASK_PA_11"
919
                ;;
920
        esac
921
        tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
922
                 pa/pa-hpux.h pa/pa-hpux10.h"
923
        extra_options="${extra_options} pa/pa-hpux.opt"
924
        case ${target} in
925
        *-*-hpux10.[1-9]*)
926
                tm_file="${tm_file} pa/pa-hpux1010.h"
927
                extra_options="${extra_options} pa/pa-hpux1010.opt"
928
                ;;
929
        esac
930
        tmake_file="pa/t-pa-hpux10 pa/t-pa-hpux pa/t-hpux-shlib"
931
        case ${enable_threads} in
932
          "")
933
            if test x$have_pthread_h = xyes ; then
934
              tmake_file="${tmake_file} pa/t-dce-thr"
935
            fi
936
            ;;
937
          yes | dce)
938
            tmake_file="${tmake_file} pa/t-dce-thr"
939
            ;;
940
        esac
941
        # Set the libgcc version number
942
        if test x$sjlj = x1; then
943
            tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
944
        else
945
            tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
946
        fi
947
        use_collect2=yes
948
        use_fixproto=yes
949
        gas=yes
950
        ;;
951
hppa*64*-*-hpux11*)
952
        target_cpu_default="MASK_PA_11|MASK_PA_20"
953
        if test x$gnu_ld = xyes
954
        then
955
                target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
956
        fi
957
        tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
958
                 pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
959
                 pa/pa-hpux11.h"
960
        case ${target} in
961
        *-*-hpux11.[1-9]*)
962
                tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
963
                extra_options="${extra_options} pa/pa-hpux1111.opt"
964
                ;;
965
        *)
966
                tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
967
                ;;
968
        esac
969
        extra_options="${extra_options} pa/pa-hpux.opt \
970
                       pa/pa-hpux1010.opt pa/pa64-hpux.opt"
971
        need_64bit_hwint=yes
972
        tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
973
        # Set the libgcc version number
974
        if test x$sjlj = x1; then
975
            tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
976
        else
977
            tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
978
        fi
979
        extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o \
980
                     libgcc_stub.a"
981
        case x${enable_threads} in
982
        x | xyes | xposix )
983
                thread_file=posix
984
                ;;
985
        esac
986
        gas=yes
987
        ;;
988
hppa[12]*-*-hpux11*)
989
        case ${target} in
990
        hppa1.1-*-* | hppa2*-*-*)
991
                target_cpu_default="MASK_PA_11"
992
                ;;
993
        esac
994
        tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
995
                 pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
996
        extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt"
997
        case ${target} in
998
        *-*-hpux11.[1-9]*)
999
                tm_file="${tm_file} pa/pa-hpux1111.h"
1000
                extra_options="${extra_options} pa/pa-hpux1111.opt"
1001
                ;;
1002
        esac
1003
        tmake_file="pa/t-pa-hpux11 pa/t-pa-hpux pa/t-hpux-shlib"
1004
        # Set the libgcc version number
1005
        if test x$sjlj = x1; then
1006
            tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1007
        else
1008
            tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1009
        fi
1010
        case x${enable_threads} in
1011
        x | xyes | xposix )
1012
                thread_file=posix
1013
                ;;
1014
        esac
1015
        use_collect2=yes
1016
        gas=yes
1017
        ;;
1018
i[34567]86-*-darwin*)
1019
        need_64bit_hwint=yes
1020
 
1021
        # This is so that '.../configure && make' doesn't fail due to
1022
        # config.guess deciding that the configuration is i386-*-darwin* and
1023
        # then this file using that to set --with-cpu=i386 which has no -m64
1024
        # support.
1025
        with_arch=${with_arch:-nocona}
1026
        with_cpu=${with_cpu:-generic}
1027
        ;;
1028
x86_64-*-darwin*)
1029
        with_arch=${with_arch:-nocona}
1030
        with_cpu=${with_cpu:-generic}
1031
        tmake_file="t-darwin ${cpu_type}/t-darwin64 t-slibgcc-darwin"
1032
        tm_file="${tm_file} ${cpu_type}/darwin64.h"
1033
        ;;
1034
i[34567]86-*-elf*)
1035
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
1036
        tmake_file="i386/t-i386elf t-svr4"
1037
        use_fixproto=yes
1038
        ;;
1039
i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
1040
        if test x$gas = xyes
1041
        then
1042
                tm_file="${tm_file} usegas.h"
1043
        fi
1044
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h"
1045
        tmake_file=t-svr4
1046
        extra_parts="crtbegin.o crtend.o"
1047
        use_fixproto=yes
1048
        ;;
1049
i[34567]86-*-aout*)
1050
        tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
1051
        use_fixproto=yes
1052
        ;;
1053
i[34567]86-*-beoself* | i[34567]86-*-beos*)
1054
        tmake_file='i386/t-beos i386/t-crtpic'
1055
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h"
1056
        extra_parts='crtbegin.o crtend.o'
1057
        ;;
1058
i[34567]86-*-freebsd*)
1059
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1060
        ;;
1061
x86_64-*-freebsd*)
1062
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1063
        ;;
1064
i[34567]86-*-netbsdelf*)
1065
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
1066
        ;;
1067
i[34567]86-*-netbsd*)
1068
        tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
1069
        tmake_file=t-netbsd
1070
        extra_parts=""
1071
        use_collect2=yes
1072
        ;;
1073
x86_64-*-netbsd*)
1074
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
1075
        ;;
1076
i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
1077
        tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
1078
        # needed to unconfuse gdb
1079
        tmake_file="t-libc-ok t-openbsd i386/t-openbsd"
1080
        # we need collect2 until our bug is fixed...
1081
        use_collect2=yes
1082
        ;;
1083
i[34567]86-*-openbsd*)
1084
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1085
        tm_file="${tm_file} openbsd.h i386/openbsdelf.h"
1086
        gas=yes
1087
        gnu_ld=yes
1088
        ;;
1089
i[34567]86-*-coff*)
1090
        tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
1091
        use_fixproto=yes
1092
        ;;
1093
i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu)
1094
                        # Intel 80386's running GNU/*
1095
                        # with ELF format using glibc 2
1096
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h"
1097
        case ${target} in
1098
        i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
1099
        i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
1100
        esac
1101
        tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtfm t-dfprules"
1102
        ;;
1103
x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1104
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
1105
                 i386/x86-64.h i386/linux64.h"
1106
        case ${target} in
1107
        x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
1108
        x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
1109
        esac
1110
        tmake_file="${tmake_file} i386/t-linux64 i386/t-crtfm t-dfprules"
1111
        ;;
1112
i[34567]86-*-gnu*)
1113
        ;;
1114
i[34567]86-pc-msdosdjgpp*)
1115
        xm_file=i386/xm-djgpp.h
1116
        tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
1117
        tmake_file=i386/t-djgpp
1118
        extra_options="${extra_options} i386/djgpp.opt"
1119
        gnu_ld=yes
1120
        gas=yes
1121
        ;;
1122
i[34567]86-*-lynxos*)
1123
        xm_defines=POSIX
1124
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1125
        tmake_file="i386/t-crtstuff t-lynx"
1126
        extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1127
        extra_options="${extra_options} lynx.opt"
1128
        thread_file=lynx
1129
        gnu_ld=yes
1130
        gas=yes
1131
        ;;
1132
i[3456x]86-*-netware*)
1133
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
1134
        tmake_file=i386/t-netware
1135
        extra_objs=netware.o
1136
        case /${with_ld} in
1137
        */nwld)
1138
                extra_objs="$extra_objs nwld.o"
1139
                tm_file="${tm_file} i386/nwld.h"
1140
                tmake_file="${tmake_file} i386/t-nwld"
1141
                extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
1142
                ;;
1143
        esac
1144
        case x${enable_threads} in
1145
        x | xyes | xposix) thread_file='posix';;
1146
        xnks) thread_file='nks';;
1147
        xno) ;;
1148
        *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
1149
        esac
1150
        ;;
1151
i[34567]86-*-nto-qnx*)
1152
        tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
1153
        tmake_file=i386/t-nto
1154
        gnu_ld=yes
1155
        gas=yes
1156
        ;;
1157
i[34567]86-*-rtems*)
1158
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h"
1159
        extra_parts="crtbegin.o crtend.o crti.o crtn.o"
1160
        tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems"
1161
        ;;
1162
i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
1163
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sco5.h"
1164
        if test x$gas = xyes
1165
        then
1166
                tm_file="usegas.h ${tm_file}"
1167
        fi
1168
        tmake_file=i386/t-sco5
1169
        extra_parts="crtbegin.o crtend.o"
1170
        extra_options="${extra_options} i386/sco5.opt"
1171
        use_fixproto=yes
1172
        ;;
1173
i[34567]86-*-solaris2*)
1174
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
1175
        case ${target} in
1176
        *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1177
                tm_file="${tm_file} sol2-6.h"
1178
                ;;
1179
        *-*-solaris2.1[0-9]*)
1180
                tm_file="${tm_file} sol2-10.h"
1181
                ;;
1182
        esac
1183
        tm_file="${tm_file} i386/sol2.h"
1184
        tmake_file="t-sol2 i386/t-sol2 t-svr4"
1185
        c_target_objs="sol2-c.o"
1186
        cxx_target_objs="sol2-c.o"
1187
        extra_objs="sol2.o"
1188
        tm_p_file="${tm_p_file} sol2-protos.h"
1189
        if test x$gnu_ld = xyes; then
1190
                tmake_file="$tmake_file t-slibgcc-elf-ver"
1191
                tm_defines="${tm_defines} TARGET_GNU_LD=1"
1192
        else
1193
                tmake_file="$tmake_file t-slibgcc-sld"
1194
        fi
1195
        if test x$gas = xyes; then
1196
                tm_file="usegas.h ${tm_file}"
1197
        fi
1198
        case ${target} in
1199
        *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
1200
                tm_file="$tm_file tm-dwarf2.h"
1201
                ;;
1202
        esac
1203
        case ${target} in
1204
        *-*-solaris2.1[0-9]*)
1205
                tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
1206
                tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1207
                tmake_file="$tmake_file i386/t-sol2-10"
1208
                need_64bit_hwint=yes
1209
                # FIXME: -m64 for i[34567]86-*-* should be allowed just
1210
                # like -m32 for x86_64-*-*.
1211
                case X"${with_cpu}" in
1212
                Xgeneric|Xnocona|Xx86-64|Xk8|Xopteron|Xathlon64|Xathlon-fx)
1213
                        ;;
1214
                X)
1215
                        with_cpu=generic
1216
                        ;;
1217
                *)
1218
                        echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1219
                        echo "generic nocona x86-64 k8 opteron athlon64 athlon-fx" 1>&2
1220
                        exit 1
1221
                        ;;
1222
                esac
1223
                # Solaris 2.10 provides crt1.o, crti.o, crtn.o, and gcrt1.o as
1224
                # part of the base system.
1225
                extra_parts="gmon.o crtbegin.o crtend.o"
1226
                ;;
1227
        *)
1228
                extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
1229
                ;;
1230
        esac
1231
        case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1232
          "":yes:* | yes:yes:* )
1233
                case ${target} in
1234
                  *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1235
                        thread_file=posix95
1236
                        ;;
1237
                  *)
1238
                        thread_file=posix
1239
                        ;;
1240
                esac
1241
                ;;
1242
          "":*:yes | yes:*:yes )
1243
                thread_file=solaris
1244
                ;;
1245
        esac
1246
        ;;
1247
i[34567]86-*-sysv5*)           # Intel x86 on System V Release 5
1248
       tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h"
1249
       if test x$stabs = xyes
1250
       then
1251
               tm_file="${tm_file} dbx.h"
1252
       fi
1253
       tmake_file="i386/t-crtpic t-svr4"
1254
       extra_parts="crtbegin.o crtend.o"
1255
       if test x$enable_threads = xyes; then
1256
               thread_file='posix'
1257
       fi
1258
        use_fixproto=yes
1259
       ;;
1260
i[34567]86-*-sysv4*)            # Intel 80386's running system V.4
1261
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
1262
        if test x$stabs = xyes
1263
        then
1264
                tm_file="${tm_file} dbx.h"
1265
        fi
1266
        tmake_file="i386/t-crtpic t-svr4"
1267
        extra_parts="crtbegin.o crtend.o"
1268
        use_fixproto=yes
1269
        ;;
1270
i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
1271
        tm_file="${tm_file} i386/sysv4.h i386/unix.h i386/att.h vx-common.h"
1272
        case ${target} in
1273
          *-vxworksae*)
1274
            tm_file="${tm_file} vxworksae.h i386/vxworksae.h"
1275
            tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
1276
            ;;
1277
          *)
1278
            tm_file="${tm_file} vxworks.h i386/vxworks.h"
1279
            tmake_file="${tmake_file} i386/t-vxworks"
1280
            ;;
1281
        esac
1282
        ;;
1283
i[34567]86-*-pe | i[34567]86-*-cygwin*)
1284
        tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h"
1285
        xm_file=i386/xm-cygwin.h
1286
        tmake_file="i386/t-cygwin i386/t-cygming"
1287
        target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1288
        extra_options="${extra_options} i386/cygming.opt"
1289
        extra_objs="winnt.o winnt-stubs.o"
1290
        c_target_objs=cygwin2.o
1291
        cxx_target_objs="cygwin2.o winnt-cxx.o"
1292
        extra_gcc_objs=cygwin1.o
1293
        if test x$enable_threads = xyes; then
1294
                thread_file='posix'
1295
        fi
1296
        ;;
1297
i[34567]86-*-mingw32*)
1298
        tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
1299
        xm_file=i386/xm-mingw32.h
1300
        tmake_file="i386/t-cygming i386/t-mingw32"
1301
        target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1302
        extra_options="${extra_options} i386/cygming.opt"
1303
        extra_objs="winnt.o winnt-stubs.o"
1304
        cxx_target_objs=winnt-cxx.o
1305
        case ${enable_threads} in
1306
          "" | yes | win32)
1307
          thread_file='win32'
1308
          tmake_file="${tmake_file} i386/t-gthr-win32"
1309
          ;;
1310
        esac
1311
        case ${target} in
1312
                *mingw32crt*)
1313
                        tm_file="${tm_file} i386/crtdll.h"
1314
                        ;;
1315
                *mingw32msv* | *mingw32*)
1316
                        ;;
1317
        esac
1318
        ;;
1319
i[34567]86-*-uwin*)
1320
        tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/uwin.h"
1321
        tmake_file="i386/t-cygwin i386/t-uwin"
1322
        extra_objs=winnt.o
1323
        extra_options="${extra_options} i386/cygming.opt"
1324
        target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1325
        if test x$enable_threads = xyes; then
1326
                thread_file='win32'
1327
        fi
1328
        use_fixproto=yes
1329
        ;;
1330
i[34567]86-*-interix3*)
1331
        tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1332
        tmake_file="i386/t-interix"
1333
        extra_objs=winnt.o
1334
        target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1335
        if test x$enable_threads = xyes ; then
1336
                thread_file='posix'
1337
        fi
1338
        if test x$stabs = xyes ; then
1339
                tm_file="${tm_file} dbxcoff.h"
1340
        fi
1341
        ;;
1342
i[34567]86-*-kaos*)
1343
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h kaos.h i386/kaos-i386.h"
1344
        tmake_file="i386/t-i386elf t-svr4"
1345
        ;;
1346
ia64*-*-elf*)
1347
        tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
1348
        tmake_file="ia64/t-ia64"
1349
        target_cpu_default="0"
1350
        if test x$gas = xyes
1351
        then
1352
                target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1353
        fi
1354
        if test x$gnu_ld = xyes
1355
        then
1356
                target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1357
        fi
1358
        extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1359
        use_fixproto=yes
1360
        ;;
1361
ia64*-*-freebsd*)
1362
        tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1363
        target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1364
        tmake_file="${tmake_file} ia64/t-ia64"
1365
        extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1366
        ;;
1367
ia64*-*-linux*)
1368
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
1369
        tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
1370
        if test x$with_system_libunwind != xyes ; then
1371
                tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
1372
        fi
1373
        target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1374
        extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1375
        ;;
1376
ia64*-*-hpux*)
1377
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
1378
        tmake_file="ia64/t-ia64 ia64/t-hpux"
1379
        target_cpu_default="MASK_GNU_AS"
1380
        case x$enable_threads in
1381
        xyes | xposix )
1382
                thread_file=posix
1383
                ;;
1384
        esac
1385
        use_collect2=no
1386
        c_target_objs="ia64-c.o"
1387
        cxx_target_objs="ia64-c.o"
1388
        extra_options="${extra_options} ia64/ilp32.opt"
1389
        # If we decide to run fixproto we should define FIXPROTO_DEFINES
1390
        # in ia64/t-hpux, and also fix the definition of putenv in
1391
        # sys-protos.h (const char not char).
1392
        ;;
1393
iq2000*-*-elf*)
1394
        tm_file="svr4.h elfos.h iq2000/iq2000.h"
1395
        tmake_file=iq2000/t-iq2000
1396
        out_file=iq2000/iq2000.c
1397
        md_file=iq2000/iq2000.md
1398
        use_fixproto=yes
1399
        ;;
1400
m32r-*-elf*)
1401
        tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1402
        extra_parts="crtinit.o crtfini.o"
1403
        use_fixproto=yes
1404
        ;;
1405
m32rle-*-elf*)
1406
        tm_file="dbxelf.h elfos.h svr4.h m32r/little.h ${tm_file}"
1407
        extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1408
        use_fixproto=yes
1409
        ;;
1410
m32r-*-linux*)
1411
        tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h"
1412
        # We override the tmake_file for linux -- why?
1413
        tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1414
        gnu_ld=yes
1415
        use_fixproto=yes
1416
        if test x$enable_threads = xyes; then
1417
                thread_file='posix'
1418
        fi
1419
        ;;
1420
m32rle-*-linux*)
1421
        tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h"
1422
        # We override the tmake_file for linux -- why?
1423
        tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1424
        gnu_ld=yes
1425
        use_fixproto=yes
1426
        if test x$enable_threads = xyes; then
1427
                thread_file='posix'
1428
        fi
1429
        ;;
1430
# m68hc11 and m68hc12 share the same machine description.
1431
m68hc11-*-*|m6811-*-*)
1432
        tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h"
1433
        tm_p_file="m68hc11/m68hc11-protos.h"
1434
        md_file="m68hc11/m68hc11.md"
1435
        out_file="m68hc11/m68hc11.c"
1436
        tmake_file="m68hc11/t-m68hc11-gas"
1437
        use_fixproto=yes
1438
        ;;
1439
m68hc12-*-*|m6812-*-*)
1440
        tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h"
1441
        tm_p_file="m68hc11/m68hc11-protos.h"
1442
        md_file="m68hc11/m68hc11.md"
1443
        out_file="m68hc11/m68hc11.c"
1444
        tmake_file="m68hc11/t-m68hc11-gas"
1445
        extra_options="${extra_options} m68hc11/m68hc11.opt"
1446
        use_fixproto=yes
1447
        ;;
1448
m68k-*-aout*)
1449
        tmake_file=m68k/t-m68kbare
1450
        tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h"
1451
        ;;
1452
m68k-*-coff*)
1453
        tmake_file=m68k/t-m68kbare
1454
        tm_defines="${tm_defines} MOTOROLA USE_GAS"
1455
        tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h"
1456
        use_fixproto=yes
1457
        ;;
1458
m68020-*-elf* | m68k-*-elf*)
1459
        tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
1460
        tm_defines="${tm_defines} MOTOROLA USE_GAS"
1461
        tmake_file=m68k/t-m68kelf
1462
        extra_parts="crtbegin.o crtend.o"
1463
        ;;
1464
m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
1465
        tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1466
        tm_defines="${tm_defines} MOTOROLA USE_GAS"
1467
        case ${target} in
1468
        m68010*)
1469
                target_cpu_default="0"
1470
                ;;
1471
        *)
1472
                target_cpu_default="MASK_68020|MASK_68881|MASK_BITFIELD"
1473
                ;;
1474
        esac
1475
        ;;
1476
m68k*-*-openbsd*)
1477
        # needed to unconfuse gdb
1478
        tm_defines="${tm_defines} OBSD_OLD_GAS TARGET_DEFAULT=(MASK_68020|MASK_68881|MASK_BITFIELD)"
1479
        tm_file="m68k/m68k.h openbsd.h m68k/openbsd.h"
1480
        tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1481
        # we need collect2 until our bug is fixed...
1482
        use_collect2=yes
1483
        ;;
1484
m68k-*-uclinux*)                # Motorola m68k/ColdFire running uClinux with uClibc
1485
        tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux.h"
1486
        tm_defines="${tm_defines} MOTOROLA USE_GAS"
1487
        tmake_file=m68k/t-uclinux
1488
        use_fixproto=no
1489
        ;;
1490
m68k-*-linux*)          # Motorola m68k's running GNU/Linux
1491
                                # with ELF format using glibc 2
1492
                                # aka the GNU/Linux C library 6.
1493
        tm_file="m68k/m68k.h dbxelf.h elfos.h svr4.h linux.h m68k/linux.h"
1494
        extra_options="${extra_options} m68k/ieee.opt"
1495
        tm_defines="${tm_defines} MOTOROLA USE_GAS"
1496
        # if not configured with --enable-sjlj-exceptions, bump the
1497
        # libgcc version number
1498
        if test x$sjlj != x1; then
1499
            tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1500
        fi
1501
        ;;
1502
m68k-*-rtems*)
1503
        tmake_file="m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems"
1504
        tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
1505
        tm_defines="${tm_defines} MOTOROLA USE_GAS"
1506
        extra_parts="crtbegin.o crtend.o"
1507
        ;;
1508
mcore-*-elf)
1509
        tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h"
1510
        tmake_file=mcore/t-mcore
1511
        use_fixproto=yes
1512
        ;;
1513
mcore-*-pe*)
1514
        tm_file="svr3.h dbxcoff.h ${tm_file} mcore/mcore-pe.h"
1515
        tmake_file=mcore/t-mcore-pe
1516
        use_fixproto=yes
1517
        ;;
1518
mips-sgi-irix[56]*)
1519
        tm_file="elfos.h ${tm_file} mips/iris.h"
1520
        tmake_file="mips/t-iris mips/t-slibgcc-irix"
1521
        target_cpu_default="MASK_ABICALLS"
1522
        case ${target} in
1523
        *-*-irix5*)
1524
                tm_file="${tm_file} mips/iris5.h"
1525
                ;;
1526
 
1527
        *-*-irix6*)
1528
                tm_file="${tm_file} mips/iris6.h"
1529
                tmake_file="${tmake_file} mips/t-iris6"
1530
                tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1531
                ;;
1532
        esac
1533
        if test "x$stabs" = xyes
1534
        then
1535
                tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
1536
        fi
1537
        if test "x$gnu_ld" = xyes
1538
        then
1539
                tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1540
        fi
1541
#       if test x$enable_threads = xyes; then
1542
#               thread_file='irix'
1543
#       fi
1544
        use_fixproto=yes
1545
        ;;
1546
mips*-*-netbsd*)                        # NetBSD/mips, either endian.
1547
        target_cpu_default="MASK_ABICALLS"
1548
        tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1549
        ;;
1550
mips64*-*-linux*)
1551
        tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
1552
        tmake_file="${tmake_file} mips/t-linux64"
1553
        tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
1554
        gnu_ld=yes
1555
        gas=yes
1556
        ;;
1557
mips*-*-linux*)                         # Linux MIPS, either endian.
1558
        tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h"
1559
        case ${target} in
1560
        mipsisa32*-*)
1561
                target_cpu_default="MASK_SOFT_FLOAT"
1562
                tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1563
                ;;
1564
        esac
1565
        ;;
1566
mips*-*-openbsd*)
1567
        tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1568
        target_cpu_default="MASK_ABICALLS"
1569
        tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h"
1570
        case ${target} in
1571
        mips*el-*-openbsd*)
1572
            tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1573
        *)  tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1574
        esac
1575
        ;;
1576
mipsisa32-*-elf* | mipsisa32el-*-elf*)
1577
        tm_file="elfos.h ${tm_file} mips/elf.h"
1578
        tmake_file=mips/t-isa3264
1579
        tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI"
1580
        use_fixproto=yes
1581
        ;;
1582
mipsisa32r2-*-elf* | mipsisa32r2el-*-elf*)
1583
        tm_file="elfos.h ${tm_file} mips/elf.h"
1584
        tmake_file=mips/t-isa3264
1585
        tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI"
1586
        use_fixproto=yes
1587
        ;;
1588
mipsisa64-*-elf* | mipsisa64el-*-elf*)
1589
        tm_file="elfos.h ${tm_file} mips/elf.h"
1590
        tmake_file=mips/t-isa3264
1591
        target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1592
        tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_EABI"
1593
        use_fixproto=yes
1594
        ;;
1595
mipsisa64sr71k-*-elf*)
1596
        tm_file="elfos.h ${tm_file} mips/elf.h"
1597
        tmake_file=mips/t-sr71k
1598
        target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1599
        tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1600
        use_fixproto=yes
1601
        ;;
1602
mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1603
        tm_file="elfos.h ${tm_file} mips/elf.h"
1604
        tmake_file="mips/t-elf mips/t-sb1"
1605
        target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1606
        tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1607
        use_fixproto=yes
1608
        ;;
1609
mips-*-elf* | mipsel-*-elf*)
1610
        tm_file="elfos.h ${tm_file} mips/elf.h"
1611
        tmake_file=mips/t-elf
1612
        use_fixproto=yes
1613
        ;;
1614
mips64-*-elf* | mips64el-*-elf*)
1615
        tm_file="elfos.h ${tm_file} mips/elf.h"
1616
        tmake_file=mips/t-elf
1617
        target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1618
        tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1619
        use_fixproto=yes
1620
        ;;
1621
mips64vr-*-elf* | mips64vrel-*-elf*)
1622
        tm_file="mips/vr.h elfos.h ${tm_file} mips/elf.h"
1623
        tmake_file=mips/t-vr
1624
        use_fixproto=yes
1625
        ;;
1626
mips64orion-*-elf* | mips64orionel-*-elf*)
1627
        tm_file="elfos.h ${tm_file} mips/elforion.h mips/elf.h"
1628
        tmake_file=mips/t-elf
1629
        target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1630
        tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1631
        use_fixproto=yes
1632
        ;;
1633
mips*-*-rtems*)
1634
        tm_file="elfos.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1635
        tmake_file="mips/t-elf t-rtems mips/t-rtems"
1636
        ;;
1637
mips-wrs-vxworks)
1638
        # We want vxworks.h after mips/elf.h, which unfortunately means we
1639
        # have to redo the tm_file list from scratch.
1640
        tm_file="elfos.h mips/mips.h svr4.h mips/elf.h vxworks.h mips/vxworks.h"
1641
        tmake_file="${tmake_file} mips/t-vxworks"
1642
        ;;
1643
mips-wrs-windiss)       # Instruction-level simulator for VxWorks.
1644
        xm_defines=POSIX
1645
        tm_file="elfos.h mips/mips.h svr4.h mips/elf.h windiss.h mips/windiss.h"
1646
        tmake_file="${tmake_file} mips/t-elf"
1647
        thread_file=
1648
        ;;
1649
mipstx39-*-elf* | mipstx39el-*-elf*)
1650
        tm_file="elfos.h ${tm_file} mips/r3900.h mips/elf.h"
1651
        tmake_file=mips/t-r3900
1652
        use_fixproto=yes
1653
        ;;
1654
mmix-knuth-mmixware)
1655
        need_64bit_hwint=yes
1656
        ;;
1657
mn10300-*-*)
1658
        tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1659
        if test x$stabs = xyes
1660
        then
1661
                tm_file="${tm_file} dbx.h"
1662
        fi
1663
        use_collect2=no
1664
        use_fixproto=yes
1665
        ;;
1666
mt-*-elf)
1667
        tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1668
        tmake_file="${tmake_file} mt/t-mt"
1669
        ;;
1670
ns32k-*-netbsdelf*)
1671
        echo "GCC does not yet support the ${target} target"; exit 1
1672
        ;;
1673
ns32k-*-netbsd*)
1674
        tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h"
1675
        # On NetBSD, the headers are already okay, except for math.h.
1676
        tmake_file="t-netbsd ns32k/t-ns32k"
1677
        extra_parts=""
1678
        use_collect2=yes
1679
        ;;
1680
or32-*-elf*)
1681 177 jeremybenn
        tm_file="${tm_file} dbxelf.h elfos.h ${cpu_type}/elf.h"
1682
        extra_parts="crtinit.o crtfini.o"
1683
        tmake_file=${cpu_type}/t-${cpu_type}
1684 38 julius
        ;;
1685
or32-*linux*)
1686 177 jeremybenn
        tm_file="${tm_file} dbxelf.h elfos.h or32/or32.h or32/elf.h or32/linux-gas.h or32/linux-elf.h"
1687
        tmake_file=or32/t-default
1688
        ;;
1689 38 julius
 
1690
pdp11-*-bsd)
1691
        tm_file="${tm_file} pdp11/2bsd.h"
1692
        use_fixproto=yes
1693
        ;;
1694
pdp11-*-*)
1695
        use_fixproto=yes
1696
        ;;
1697
# port not yet contributed
1698
#powerpc-*-openbsd*)
1699
#       tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit "
1700
#       extra_headers=
1701
#       ;;
1702
powerpc64-*-linux*)
1703
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1704
        test x$with_cpu != x || cpu_is_64bit=yes
1705
        test x$cpu_is_64bit != xyes || tm_file="${tm_file} rs6000/default64.h"
1706
        tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1707
        if test x${enable_secureplt} = xyes; then
1708
                tm_file="rs6000/secureplt.h ${tm_file}"
1709
        fi
1710
        extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1711
        tmake_file="t-dfprules rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp"
1712
        ;;
1713
powerpc64-*-gnu*)
1714
        tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
1715
        extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1716
        tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp"
1717
        ;;
1718
powerpc-*-beos*)
1719
        tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h"
1720
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-beos"
1721
        extra_headers=
1722
        use_fixproto=yes
1723
        ;;
1724
powerpc-*-darwin*)
1725
        extra_options="${extra_options} rs6000/darwin.opt"
1726
        extra_parts="crt2.o"
1727
        case ${target} in
1728
          *-darwin1[0-9]* | *-darwin[8-9]*)
1729
            tmake_file="${tmake_file} rs6000/t-darwin8"
1730
            tm_file="${tm_file} rs6000/darwin8.h"
1731
            ;;
1732
          *-darwin7*)
1733
            tm_file="${tm_file} rs6000/darwin7.h"
1734
            ;;
1735
          *-darwin[0-6]*)
1736
            ;;
1737
        esac
1738
        extra_headers=altivec.h
1739
        ;;
1740
powerpc64-*-darwin*)
1741
        tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h"
1742
        extra_options="${extra_options} ${cpu_type}/darwin.opt"
1743
        # We're omitting t-darwin8 to avoid building any multilibs
1744
        extra_headers=altivec.h
1745
        ;;
1746
powerpc*-*-freebsd*)
1747
        tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
1748
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1749
        extra_options="${extra_options} rs6000/sysv4.opt"
1750
        ;;
1751
powerpc-*-netbsd*)
1752
        tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
1753
        tmake_file="${tmake_file} rs6000/t-netbsd"
1754
        extra_options="${extra_options} rs6000/sysv4.opt"
1755
        ;;
1756
powerpc-*-chorusos*)
1757
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h"
1758
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos rs6000/t-ppccomm"
1759
        extra_options="${extra_options} rs6000/sysv4.opt"
1760
        case ${enable_threads} in
1761
          yes | posix)
1762
            thread_file='posix'
1763
            ;;
1764
        esac
1765
        use_fixproto=yes
1766
        ;;
1767
powerpc-*-eabispe*)
1768
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabispe.h"
1769
        extra_options="${extra_options} rs6000/sysv4.opt"
1770
        tmake_file="rs6000/t-spe rs6000/t-ppccomm"
1771
        ;;
1772
powerpc-*-eabisimaltivec*)
1773
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h"
1774
        extra_options="${extra_options} rs6000/sysv4.opt"
1775
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1776
        ;;
1777
powerpc-*-eabisim*)
1778
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
1779
        extra_options="${extra_options} rs6000/sysv4.opt"
1780
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1781
        ;;
1782
powerpc-*-elf*)
1783
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1784
        extra_options="${extra_options} rs6000/sysv4.opt"
1785
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1786
        use_fixproto=yes
1787
        ;;
1788
powerpc-*-eabialtivec*)
1789
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
1790
        extra_options="${extra_options} rs6000/sysv4.opt"
1791
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1792
        ;;
1793
powerpc-*-eabi*)
1794
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h"
1795
        extra_options="${extra_options} rs6000/sysv4.opt"
1796
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1797
        ;;
1798
powerpc-*-rtems*)
1799
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h rtems.h"
1800
        extra_options="${extra_options} rs6000/sysv4.opt"
1801
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-rtems t-rtems rs6000/t-ppccomm"
1802
        ;;
1803
powerpc-*-linux*altivec*)
1804
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
1805
        extra_options="${extra_options} rs6000/sysv4.opt"
1806
        tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1807
        ;;
1808
powerpc-*-linux*spe*)
1809
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h"
1810
        extra_options="${extra_options} rs6000/sysv4.opt"
1811
        tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1812
        ;;
1813
powerpc-*-linux*)
1814
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1815
        extra_options="${extra_options} rs6000/sysv4.opt"
1816
        tmake_file="t-dfprules rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1817
        case ${enable_targets}:${cpu_is_64bit} in
1818
            *powerpc64* | all:* | *:yes)
1819
                if test x$cpu_is_64bit = xyes; then
1820
                    tm_file="${tm_file} rs6000/default64.h"
1821
                fi
1822
                tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1823
                tmake_file="$tmake_file rs6000/t-linux64"
1824
                extra_options="${extra_options} rs6000/linux64.opt"
1825
                ;;
1826
            *)
1827
                tm_file="${tm_file} rs6000/linux.h"
1828
                ;;
1829
        esac
1830
        if test x${enable_secureplt} = xyes; then
1831
                tm_file="rs6000/secureplt.h ${tm_file}"
1832
        fi
1833
        ;;
1834
powerpc-*-gnu-gnualtivec*)
1835
        tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
1836
        extra_options="${extra_options} rs6000/sysv4.opt"
1837
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1838
        if test x$enable_threads = xyes; then
1839
                thread_file='posix'
1840
        fi
1841
        ;;
1842
powerpc-*-gnu*)
1843
        tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h"
1844
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1845
        extra_options="${extra_options} rs6000/sysv4.opt"
1846
        if test x$enable_threads = xyes; then
1847
                thread_file='posix'
1848
        fi
1849
        ;;
1850
powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
1851
        # We want vxworks.h after rs6000/sysv4.h, which unfortunately
1852
        # means we have to redo the tm_file list from scratch.
1853
        tm_file="rs6000/rs6000.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1854
        tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks"
1855
        extra_options="${extra_options} rs6000/sysv4.opt"
1856
        extra_headers=ppc-asm.h
1857
        case ${target} in
1858
          *-vxworksae*)
1859
            tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/vxworksae.h"
1860
            tmake_file="${tmake_file} rs6000/t-vxworksae"
1861
            ;;
1862
          *-vxworks*)
1863
            tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h"
1864
            ;;
1865
        esac
1866
        ;;
1867
powerpc-wrs-windiss*)  # Instruction-level simulator for VxWorks.
1868
        tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
1869
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1870
        extra_options="${extra_options} rs6000/sysv4.opt"
1871
        thread_file=""
1872
        use_fixproto=yes
1873
        ;;
1874
powerpc-*-lynxos*)
1875
        xm_defines=POSIX
1876
        tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
1877
        tmake_file="t-lynx rs6000/t-lynx"
1878
        extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
1879
        extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1880
        extra_options="${extra_options} lynx.opt"
1881
        thread_file=lynx
1882
        gnu_ld=yes
1883
        gas=yes
1884
        ;;
1885
powerpcle-*-sysv*)
1886
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1887
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos rs6000/t-ppccomm"
1888
        extra_options="${extra_options} rs6000/sysv4.opt"
1889
        use_fixproto=yes
1890
        ;;
1891
powerpcle-*-elf*)
1892
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1893
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1894
        extra_options="${extra_options} rs6000/sysv4.opt"
1895
        use_fixproto=yes
1896
        ;;
1897
powerpcle-*-eabisim*)
1898
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
1899
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1900
        extra_options="${extra_options} rs6000/sysv4.opt"
1901
        ;;
1902
powerpcle-*-eabi*)
1903
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
1904
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1905
        extra_options="${extra_options} rs6000/sysv4.opt"
1906
        ;;
1907
powerpc-*-kaos*)
1908
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h kaos.h rs6000/kaos-ppc.h"
1909
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1910
        extra_options="${extra_options} rs6000/sysv4.opt"
1911
        ;;
1912
powerpcle-*-kaos*)
1913
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h kaos.h rs6000/kaos-ppc.h"
1914
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1915
        extra_options="${extra_options} rs6000/sysv4.opt"
1916
        ;;
1917
rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
1918
        tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
1919
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-newas"
1920
        extra_options="${extra_options} rs6000/aix41.opt"
1921
        use_collect2=yes
1922
        extra_headers=
1923
        use_fixproto=yes
1924
        ;;
1925
rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
1926
        tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
1927
        tmake_file=rs6000/t-aix43
1928
        extra_options="${extra_options} rs6000/aix64.opt"
1929
        use_collect2=yes
1930
        thread_file='aix'
1931
        extra_headers=
1932
        ;;
1933
rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
1934
        tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
1935
        extra_options="${extra_options} rs6000/aix64.opt"
1936
        tmake_file=rs6000/t-aix43
1937
        use_collect2=yes
1938
        thread_file='aix'
1939
        extra_headers=
1940
        ;;
1941
rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
1942
        tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h"
1943
        tmake_file=rs6000/t-aix52
1944
        extra_options="${extra_options} rs6000/aix64.opt"
1945
        use_collect2=yes
1946
        thread_file='aix'
1947
        extra_headers=
1948
        ;;
1949
s390-*-linux*)
1950
        tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1951
        tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux"
1952
        ;;
1953
s390x-*-linux*)
1954
        tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1955
        tm_p_file=s390/s390-protos.h
1956
        md_file=s390/s390.md
1957
        extra_modes=s390/s390-modes.def
1958
        out_file=s390/s390.c
1959
        tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux s390/t-linux64"
1960
        ;;
1961
s390x-ibm-tpf*)
1962
        tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
1963
        tm_p_file=s390/s390-protos.h
1964
        md_file=s390/s390.md
1965
        extra_modes=s390/s390-modes.def
1966
        out_file=s390/s390.c
1967
        extra_parts="crtbeginS.o crtendS.o"
1968
        tmake_file="s390/t-crtstuff s390/t-tpf"
1969
        thread_file='tpf'
1970
        extra_options="${extra_options} s390/tpf.opt"
1971
        ;;
1972
score-*-elf)
1973
        tm_file="dbxelf.h elfos.h score/elf.h score/score.h"
1974
        tmake_file=score/t-score-elf
1975
        extra_objs="score-mdaux.o"
1976
        ;;
1977
sh-*-elf* | sh[12346l]*-*-elf* | sh*-*-kaos* | \
1978
sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
1979
  sh-*-linux* | sh[346lbe]*-*-linux* | \
1980
  sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
1981
   sh64-*-netbsd* | sh64l*-*-netbsd*)
1982
        tmake_file="${tmake_file} sh/t-sh sh/t-elf"
1983
        if test x${with_endian} = x; then
1984
                case ${target} in
1985
                sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
1986
                shbe-*-* | sheb-*-*)               with_endian=big,little ;;
1987
                sh[1234]l* | sh[34]*-*-linux*)     with_endian=little ;;
1988
                shl* | sh64l* | sh*-*-linux* | \
1989
                  sh5l* | sh-superh-elf)           with_endian=little,big ;;
1990
                sh[1234]*-*-*)                     with_endian=big ;;
1991
                *)                                 with_endian=big,little ;;
1992
                esac
1993
        fi
1994
        case ${with_endian} in
1995
        big|little)     tmake_file="${tmake_file} sh/t-1e" ;;
1996
        big,little|little,big) ;;
1997
        *)      echo "with_endian=${with_endian} not supported."; exit 1 ;;
1998
        esac
1999
        case ${with_endian} in
2000
        little*)        tm_file="sh/little.h ${tm_file}" ;;
2001
        esac
2002
        tm_file="${tm_file} dbxelf.h elfos.h"
2003
        case ${target} in
2004
        sh*-*-netbsd*)  ;;
2005
        *)              tm_file="${tm_file} svr4.h" ;;
2006
        esac
2007
        tm_file="${tm_file} sh/elf.h"
2008
        case ${target} in
2009
        sh*-*-linux*)   tmake_file="${tmake_file} sh/t-linux"
2010
                        tm_file="${tm_file} linux.h sh/linux.h" ;;
2011
        sh*-*-kaos*)    tm_file="${tm_file} sh/embed-elf.h kaos.h sh/kaos-sh.h"
2012
                        ;;
2013
        sh*-*-netbsd*)  tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
2014
        sh*-superh-elf) if test x$with_libgloss != xno; then
2015
                                with_libgloss=yes
2016
                                tm_file="${tm_file} sh/newlib.h"
2017
                        fi
2018
                        tm_file="${tm_file} sh/embed-elf.h"
2019
                        extra_options="${extra_options} sh/superh.opt" ;;
2020
        *)              if test x$with_newlib = xyes \
2021
                           && test x$with_libgloss = xyes; then
2022
                                tm_file="${tm_file} sh/newlib.h"
2023
                        fi
2024
                        tm_file="${tm_file} sh/embed-elf.h" ;;
2025
        esac
2026
        case ${target} in
2027
        sh5*-*-netbsd*)
2028
                # SHmedia, 32-bit ABI
2029
                tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd"
2030
                ;;
2031
        sh64*-netbsd*)
2032
                # SHmedia, 64-bit ABI
2033
                tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64"
2034
                ;;
2035
        *-*-netbsd)
2036
                tmake_file="${tmake_file} sh/t-netbsd"
2037
                ;;
2038
        sh64*-*-linux*)
2039
                tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64"
2040
                tm_file="${tm_file} sh/sh64.h"
2041
                extra_headers="shmedia.h ushmedia.h sshmedia.h"
2042
                ;;
2043
        sh64*)
2044
                tmake_file="${tmake_file} sh/t-sh64"
2045
                tm_file="${tm_file} sh/sh64.h"
2046
                extra_headers="shmedia.h ushmedia.h sshmedia.h"
2047
                ;;
2048
        *-*-symbianelf*)
2049
                tmake_file="sh/t-symbian"
2050
                tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
2051
                extra_objs="symbian.o"
2052
                extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
2053
                ;;
2054
        esac
2055
        # sed el/eb endian suffixes away to avoid confusion with sh[23]e
2056
        case `echo ${target} | sed 's/e[lb]-/-/'` in
2057
        sh64*-*-netbsd*)        sh_cpu_target=sh5-64media ;;
2058
        sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
2059
        sh4a_single_only*)      sh_cpu_target=sh4a-single-only ;;
2060
        sh4a_single*)           sh_cpu_target=sh4a-single ;;
2061
        sh4a_nofpu*)            sh_cpu_target=sh4a-nofpu ;;
2062
        sh4al)                  sh_cpu_target=sh4al ;;
2063
        sh4a*)                  sh_cpu_target=sh4a ;;
2064
        sh4_single_only*)       sh_cpu_target=sh4-single-only ;;
2065
        sh4_single*)            sh_cpu_target=sh4-single ;;
2066
        sh4_nofpu*)             sh_cpu_target=sh4-nofpu ;;
2067
        sh4* | sh-superh-*)     sh_cpu_target=sh4 ;;
2068
        sh3e*)                  sh_cpu_target=sh3e ;;
2069
        sh*-*-netbsd* | sh3*)   sh_cpu_target=sh3 ;;
2070
        sh2a_single_only*)      sh_cpu_target=sh2a-single-only ;;
2071
        sh2a_single*)           sh_cpu_target=sh2a-single ;;
2072
        sh2a_nofpu*)            sh_cpu_target=sh2a-nofpu ;;
2073
        sh2a*)                  sh_cpu_target=sh2a ;;
2074
        sh2e*)                  sh_cpu_target=sh2e ;;
2075
        sh2*)                   sh_cpu_target=sh2 ;;
2076
        *)                      sh_cpu_target=sh1 ;;
2077
        esac
2078
        # did the user say --without-fp ?
2079
        if test x$with_fp = xno; then
2080
                case ${sh_cpu_target} in
2081
                sh5-*media)     sh_cpu_target=${sh_cpu_target}-nofpu ;;
2082
                sh4al | sh1)    ;;
2083
                sh4a* )         sh_cpu_target=sh4a-nofpu ;;
2084
                sh4*)           sh_cpu_target=sh4-nofpu ;;
2085
                sh3*)           sh_cpu_target=sh3 ;;
2086
                sh2a*)          sh_cpu_target=sh2a-nofpu ;;
2087
                sh2*)           sh_cpu_target=sh2 ;;
2088
                *)      echo --without-fp not available for $target: ignored
2089
                esac
2090
                tm_defines="$tm_defines STRICT_NOFPU=1"
2091
        fi
2092
        sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
2093
        case $sh_cpu_default in
2094
        sh5-64media-nofpu | sh5-64media | \
2095
          sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
2096
          sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
2097
          sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
2098
          sh4-single-only | sh4-single | sh4-nofpu | sh4 | \
2099
          sh3e | sh3 | sh2e | sh2 | sh1) ;;
2100
        "")     sh_cpu_default=${sh_cpu_target} ;;
2101
        *)      echo "with_cpu=$with_cpu not supported"; exit 1 ;;
2102
        esac
2103
        sh_multilibs=${with_multilib_list}
2104
        if test x${sh_multilibs} = x ; then
2105
                case ${target} in
2106
                sh64-superh-linux* | \
2107
                sh[1234]*)      sh_multilibs=${sh_cpu_target} ;;
2108
                sh64* | sh5*)   sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
2109
                sh-superh-*)    sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
2110
                sh*-*-linux*)   sh_multilibs=m1,m3e,m4 ;;
2111
                sh*-*-netbsd*)  sh_multilibs=m3,m3e,m4 ;;
2112
                *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
2113
                esac
2114
                if test x$with_fp = xno; then
2115
                        sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
2116
                fi
2117
        fi
2118
        target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
2119
        tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
2120
        sh_multilibs=`echo $sh_multilibs,$sh_cpu_default | sed -e 's/[  ,/][    ,]*/ /g' -e 's/ $//' -e 's/^m/sh/' -e 's/ m/ sh/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
2121
        for sh_multilib in ${sh_multilibs}; do
2122
                case ${sh_multilib} in
2123
                sh1 | sh2 | sh2e | sh3 | sh3e | \
2124
                sh4 | sh4-single | sh4-single-only | sh4-nofpu | \
2125
                sh4a | sh4a-single | sh4a-single-only | sh4a-nofpu | sh4al | \
2126
                sh2a | sh2a-single | sh2a-single-only | sh2a-nofpu | \
2127
                sh5-64media | sh5-64media-nofpu | \
2128
                sh5-32media | sh5-32media-nofpu | \
2129
                sh5-compact | sh5-compact-nofpu)
2130
                        tmake_file="${tmake_file} sh/t-mlib-${sh_multilib}"
2131
                        tm_defines="$tm_defines SUPPORT_`echo $sh_multilib|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2132
                        ;;
2133
                *)
2134
                        echo "with_multilib_list=${sh_multilib} not supported."
2135
                        exit 1
2136
                        ;;
2137
                esac
2138
        done
2139
        if test x${enable_incomplete_targets} = xyes ; then
2140
                tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
2141
        fi
2142
        use_fixproto=yes
2143
        ;;
2144
sh-*-rtemscoff*)
2145
        tmake_file="sh/t-sh t-rtems sh/t-rtems"
2146
        tm_file="${tm_file} dbxcoff.h sh/coff.h sh/rtems.h rtems.h"
2147
        ;;
2148
sh-*-rtems*)
2149
        tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
2150
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
2151
        ;;
2152
sh-wrs-vxworks)
2153
        tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
2154
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/vxworks.h"
2155
        ;;
2156
sh-*-*)
2157
        tm_file="${tm_file} dbxcoff.h sh/coff.h"
2158
        use_fixproto=yes
2159
        ;;
2160
sparc-*-netbsdelf*)
2161
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2162
        extra_options="${extra_options} sparc/long-double-switch.opt"
2163
        ;;
2164
sparc64-*-openbsd*)
2165
        tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
2166
        extra_options="${extra_options} sparc/little-endian.opt"
2167
        gas=yes gnu_ld=yes
2168
        with_cpu=ultrasparc
2169
        ;;
2170
sparc-*-elf*)
2171
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
2172
        tmake_file="sparc/t-elf sparc/t-crtfm"
2173
        extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2174
        use_fixproto=yes
2175
        ;;
2176
sparc-*-linux*)         # SPARC's running GNU/Linux, libc6
2177
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
2178
        extra_options="${extra_options} sparc/long-double-switch.opt"
2179
        tmake_file="${tmake_file} sparc/t-linux sparc/t-crtfm"
2180
        ;;
2181
sparc-*-rtems*)
2182
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h"
2183
        tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
2184
        extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2185
        ;;
2186
sparc64-*-solaris2* | sparcv9-*-solaris2*)
2187
        tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2188
        case ${target} in
2189
        *-*-solaris2.1[0-9]*)
2190
                tm_file="${tm_file} sol2-10.h"
2191
                ;;
2192
        esac
2193
        tm_file="${tm_file} sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
2194
        if test x$gnu_ld = xyes; then
2195
                tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
2196
        fi
2197
        if test x$gas = xyes; then
2198
                tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
2199
        fi
2200
        tm_file="${tm_file} tm-dwarf2.h"
2201
        tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
2202
        if test x$gnu_ld = xyes; then
2203
                tmake_file="$tmake_file t-slibgcc-elf-ver"
2204
        else
2205
                tmake_file="$tmake_file t-slibgcc-sld"
2206
        fi
2207
        c_target_objs="sol2-c.o"
2208
        cxx_target_objs="sol2-c.o"
2209
        extra_objs="sol2.o"
2210
        tm_p_file="${tm_p_file} sol2-protos.h"
2211
        extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
2212
        case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2213
          "":yes:* | yes:yes:* ) thread_file=posix ;;
2214
          "":*:yes | yes:*:yes ) thread_file=solaris ;;
2215
        esac
2216
        need_64bit_hwint=yes
2217
        ;;
2218
sparc-*-solaris2*)
2219
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2220
        case ${target} in
2221
        *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2222
                tm_file="${tm_file} sol2-6.h"
2223
                ;;
2224
        *-*-solaris2.1[0-9]*)
2225
                tm_file="${tm_file} sol2-10.h"
2226
                ;;
2227
        esac
2228
        tm_file="${tm_file} sparc/sol2.h"
2229
        if test x$gnu_ld = xyes; then
2230
                tm_file="${tm_file} sparc/sol2-gld.h"
2231
        fi
2232
        if test x$gas = xyes; then
2233
                tm_file="${tm_file} sparc/sol2-gas.h"
2234
        fi
2235
        tmake_file="t-sol2 sparc/t-sol2 sparc/t-crtfm"
2236
        if test x$gnu_ld = xyes; then
2237
                tmake_file="$tmake_file t-slibgcc-elf-ver"
2238
        else
2239
                tmake_file="$tmake_file t-slibgcc-sld"
2240
        fi
2241
        case ${target} in
2242
        *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2243
                if test x$gnu_ld = xno; then
2244
                        tm_file="${tm_file} sparc/sol26-sld.h"
2245
                fi
2246
                ;;
2247
        *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
2248
                tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
2249
                if test x$gnu_ld = xyes; then
2250
                        tm_file="${tm_file} sparc/sol2-gld-bi.h"
2251
                fi
2252
                if test x$gas = xyes; then
2253
                        tm_file="${tm_file} sparc/sol2-gas-bi.h"
2254
                fi
2255
                tm_file="${tm_file} tm-dwarf2.h"
2256
                tmake_file="$tmake_file sparc/t-sol2-64"
2257
                need_64bit_hwint=yes
2258
                test x$with_cpu != x || with_cpu=v9
2259
                ;;
2260
        esac
2261
        c_target_objs="sol2-c.o"
2262
        cxx_target_objs="sol2-c.o"
2263
        extra_objs="sol2.o"
2264
        tm_p_file="${tm_p_file} sol2-protos.h"
2265
        extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
2266
        case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2267
          "":yes:* | yes:yes:* )
2268
                case ${target} in
2269
                  *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2270
                        thread_file=posix95
2271
                        ;;
2272
                  *)
2273
                        thread_file=posix
2274
                        ;;
2275
                esac
2276
                ;;
2277
          "":*:yes | yes:*:yes )
2278
                thread_file=solaris
2279
                ;;
2280
        esac
2281
        ;;
2282
sparc-*-sysv4*)
2283
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sysv4-only.h"
2284
        tmake_file=t-svr4
2285
        extra_parts="crtbegin.o crtend.o"
2286
        use_fixproto=yes
2287
        ;;
2288
sparc64-*-elf*)
2289
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
2290
        extra_options="${extra_options} sparc/little-endian.opt"
2291
        tmake_file="${tmake_file} sparc/t-crtfm"
2292
        extra_parts="crtbegin.o crtend.o"
2293
        use_fixproto=yes
2294
        ;;
2295
sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2296
        tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2297
        extra_options="${extra_options} sparc/long-double-switch.opt"
2298
        tmake_file="${tmake_file} sparc/t-crtfm"
2299
        case "x$with_cpu" in
2300
                xultrasparc) ;;
2301
                x) with_cpu=ultrasparc ;;
2302
                *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2303
        esac
2304
        need_64bit_hwint=yes
2305
        ;;
2306
sparc64-*-linux*)               # 64-bit SPARC's running GNU/Linux
2307
        tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
2308
        extra_options="${extra_options} sparc/long-double-switch.opt"
2309
        tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
2310
        ;;
2311
sparc64-*-netbsd*)
2312
        tm_file="sparc/biarch64.h ${tm_file}"
2313
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2314
        extra_options="${extra_options} sparc/long-double-switch.opt"
2315
        tmake_file="${tmake_file} sparc/t-netbsd64"
2316
        ;;
2317
strongarm-*-elf*)
2318
        tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2319
        tmake_file="arm/t-arm arm/t-strongarm-elf"
2320
        out_file=arm/arm.c
2321
        md_file=arm/arm.md
2322
        extra_modes=arm/arm-modes.def
2323
        use_fixproto=yes
2324
        ;;
2325
strongarm-*-pe)
2326
        tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h"
2327
        tmake_file="arm/t-arm arm/t-strongarm-pe"
2328
        out_file=arm/arm.c
2329
        md_file=arm/arm.md
2330
        extra_modes=arm/arm-modes.def
2331
        extra_options="${extra_options} arm/pe.opt"
2332
        extra_objs=pe.o
2333
        use_fixproto=yes
2334
        ;;
2335
strongarm-*-kaos*)
2336
        tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-strongarm.h"
2337
        tmake_file="arm/t-arm arm/t-strongarm-elf"
2338
        out_file=arm/arm.c
2339
        md_file=arm/arm.md
2340
        extra_modes=arm/arm-modes.def
2341
        ;;
2342
v850e1-*-*)
2343
        target_cpu_default="TARGET_CPU_v850e1"
2344
        tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2345
        tm_p_file=v850/v850-protos.h
2346
        tmake_file=v850/t-v850e
2347
        md_file=v850/v850.md
2348
        out_file=v850/v850.c
2349
        extra_options="${extra_options} v850/v850.opt"
2350
        if test x$stabs = xyes
2351
        then
2352
                tm_file="${tm_file} dbx.h"
2353
        fi
2354
        use_collect2=no
2355
        c_target_objs="v850-c.o"
2356
        cxx_target_objs="v850-c.o"
2357
        use_fixproto=yes
2358
        ;;
2359
v850e-*-*)
2360
        target_cpu_default="TARGET_CPU_v850e"
2361
        tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2362
        tm_p_file=v850/v850-protos.h
2363
        tmake_file=v850/t-v850e
2364
        md_file=v850/v850.md
2365
        out_file=v850/v850.c
2366
        extra_options="${extra_options} v850/v850.opt"
2367
        if test x$stabs = xyes
2368
        then
2369
                tm_file="${tm_file} dbx.h"
2370
        fi
2371
        use_collect2=no
2372
        c_target_objs="v850-c.o"
2373
        cxx_target_objs="v850-c.o"
2374
        use_fixproto=yes
2375
        ;;
2376
v850-*-*)
2377
        target_cpu_default="TARGET_CPU_generic"
2378
        tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2379
        tmake_file=v850/t-v850
2380
        if test x$stabs = xyes
2381
        then
2382
                tm_file="${tm_file} dbx.h"
2383
        fi
2384
        use_collect2=no
2385
        c_target_objs="v850-c.o"
2386
        cxx_target_objs="v850-c.o"
2387
        use_fixproto=yes
2388
        ;;
2389
vax-*-bsd*)                     # VAXen running BSD
2390
        tm_file="${tm_file} vax/bsd.h"
2391
        tmake_file=vax/t-memfuncs
2392
        use_collect2=yes
2393
        use_fixproto=yes
2394
        ;;
2395
vax-*-sysv*)                    # VAXen running system V
2396
        tm_file="${tm_file} vax/vaxv.h"
2397
        tmake_file=vax/t-memfuncs
2398
        use_fixproto=yes
2399
        ;;
2400
vax-*-netbsdelf*)
2401
        tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2402
        ;;
2403
vax-*-netbsd*)
2404
        tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
2405
        tmake_file=t-netbsd
2406
        extra_parts=""
2407
        use_collect2=yes
2408
        ;;
2409
vax-*-openbsd*)
2410
        tm_file="vax/vax.h vax/openbsd1.h openbsd.h vax/openbsd.h"
2411
        use_collect2=yes
2412
        ;;
2413
vax-*-ultrix*)                  # VAXen running ultrix
2414
        tm_file="${tm_file} vax/ultrix.h"
2415
        tmake_file=vax/t-memfuncs
2416
        use_fixproto=yes
2417
        ;;
2418
xscale-*-elf)
2419
        tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2420
        tmake_file="arm/t-arm arm/t-xscale-elf"
2421
        out_file=arm/arm.c
2422
        md_file=arm/arm.md
2423
        extra_modes=arm/arm-modes.def
2424
        use_fixproto=yes
2425
        ;;
2426
xscale-*-coff)
2427
        tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/xscale-coff.h arm/arm.h"
2428
        tmake_file="arm/t-arm arm/t-xscale-coff"
2429
        out_file=arm/arm.c
2430
        md_file=arm/arm.md
2431
        extra_modes=arm/arm-modes.def
2432
        use_fixproto=yes
2433
        ;;
2434
xstormy16-*-elf)
2435
        # For historical reasons, the target files omit the 'x'.
2436
        tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h"
2437
        tm_p_file=stormy16/stormy16-protos.h
2438
        md_file=stormy16/stormy16.md
2439
        out_file=stormy16/stormy16.c
2440
        extra_options=stormy16/stormy16.opt
2441
        tmake_file="stormy16/t-stormy16"
2442
        extra_parts="crtbegin.o crtend.o"
2443
        use_fixproto=yes
2444
        ;;
2445
xtensa-*-elf*)
2446
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h"
2447
        tmake_file="xtensa/t-xtensa xtensa/t-elf"
2448
        ;;
2449
xtensa-*-linux*)
2450
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h"
2451
        tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2452
        ;;
2453
am33_2.0-*-linux*)
2454
        tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h"
2455
        tmake_file="${tmake_file} mn10300/t-linux"
2456
        gas=yes gnu_ld=yes
2457
        extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2458
        use_collect2=no
2459
        ;;
2460
m32c-*-elf*)
2461
        tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2462
        c_target_objs="m32c-pragma.o"
2463
        cxx_target_objs="m32c-pragma.o"
2464
        use_fixproto=yes
2465
        ;;
2466
*)
2467
        echo "*** Configuration ${target} not supported" 1>&2
2468
        exit 1
2469
        ;;
2470
esac
2471
 
2472
case ${target} in
2473
i[34567]86-*-linux*aout* | i[34567]86-*-linux*libc1)
2474
        tmake_file="${tmake_file} i386/t-gmm_malloc"
2475
        ;;
2476
i[34567]86-*-linux* | x86_64-*-linux*)
2477
        tmake_file="${tmake_file} i386/t-pmm_malloc"
2478
        ;;
2479
i[34567]86-*-* | x86_64-*-*)
2480
        tmake_file="${tmake_file} i386/t-gmm_malloc"
2481
        ;;
2482
esac
2483
 
2484
# Support for --with-cpu and related options (and a few unrelated options,
2485
# too).
2486
case ${with_cpu} in
2487
  yes | no)
2488
    echo "--with-cpu must be passed a value" 1>&2
2489
    exit 1
2490
    ;;
2491
esac
2492
 
2493
# If there is no $with_cpu option, try to infer one from ${target}.
2494
# This block sets nothing except for with_cpu.
2495
if test x$with_cpu = x ; then
2496
  case ${target} in
2497
    ep9312-*-*)
2498
      # A Cirrus ARM variant.
2499
      with_cpu="ep9312"
2500
      ;;
2501
    i386-*-*)
2502
      with_cpu=i386
2503
      ;;
2504
    i486-*-*)
2505
      with_cpu=i486
2506
      ;;
2507
    i586-*-*)
2508
      case ${target_noncanonical} in
2509
        k6_2-*)
2510
          with_cpu=k6-2
2511
          ;;
2512
        k6_3-*)
2513
          with_cpu=k6-3
2514
          ;;
2515
        k6-*)
2516
          with_cpu=k6
2517
          ;;
2518
        pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2519
          with_cpu=pentium-mmx
2520
          ;;
2521
        *)
2522
          with_cpu=pentium
2523
          ;;
2524
      esac
2525
      ;;
2526
    i686-*-* | i786-*-*)
2527
      case ${target_noncanonical} in
2528
        k8-*|opteron-*|athlon_64-*)
2529
          with_cpu=k8
2530
          ;;
2531
        athlon_xp-*|athlon_mp-*|athlon_4-*)
2532
          with_cpu=athlon-4
2533
          ;;
2534
        athlon_tbird-*|athlon-*)
2535
          with_cpu=athlon
2536
          ;;
2537
        pentium2-*)
2538
          with_cpu=pentium2
2539
          ;;
2540
        pentium3-*|pentium3m-*)
2541
          with_cpu=pentium3
2542
          ;;
2543
        pentium4-*|pentium4m-*)
2544
          with_cpu=pentium4
2545
          ;;
2546
        prescott-*)
2547
          with_cpu=prescott
2548
          ;;
2549
        nocona-*)
2550
          with_cpu=nocona
2551
          ;;
2552
        pentium_m-*)
2553
          with_cpu=pentium-m
2554
          ;;
2555
        pentiumpro-*)
2556
          with_cpu=pentiumpro
2557
          ;;
2558
        *)
2559
          with_cpu=generic
2560
          ;;
2561
      esac
2562
      ;;
2563
    x86_64-*-*)
2564
      case ${target_noncanonical} in
2565
        k8-*|opteron-*|athlon_64-*)
2566
          with_cpu=k8
2567
          ;;
2568
        nocona-*)
2569
          with_cpu=nocona
2570
          ;;
2571
        *)
2572
          with_cpu=generic
2573
          ;;
2574
      esac
2575
      ;;
2576
    alphaev6[78]*-*-*)
2577
      with_cpu=ev67
2578
      ;;
2579
    alphaev6*-*-*)
2580
      with_cpu=ev6
2581
      ;;
2582
    alphapca56*-*-*)
2583
      with_cpu=pca56
2584
      ;;
2585
    alphaev56*-*-*)
2586
      with_cpu=ev56
2587
      ;;
2588
    alphaev5*-*-*)
2589
      with_cpu=ev5
2590
      ;;
2591
    frv-*-*linux* | frv400-*-*linux*)
2592
      with_cpu=fr400
2593
      ;;
2594
    frv550-*-*linux*)
2595
      with_cpu=fr550
2596
      ;;
2597
    sparc*-*-*)
2598
      with_cpu="`echo ${target} | sed 's/-.*$//'`"
2599
      ;;
2600
  esac
2601
fi
2602
 
2603
# Similarly for --with-float
2604
if test x$with_float = x; then
2605
        case ${target} in
2606
        ep9312-*-*)
2607
                with_float=hard
2608
                ;;
2609
        esac
2610
fi
2611
 
2612
# Similarly for --with-schedule.
2613
if test x$with_schedule = x; then
2614
        case ${target} in
2615
        hppa1* | parisc1*)
2616
                # Override default PA8000 scheduling model.
2617
                with_schedule=7100LC
2618
                ;;
2619
        esac
2620
fi
2621
 
2622
# Validate and mark as valid any --with options supported
2623
# by this target.  In order to use a particular --with option
2624
# you must list it in supported_defaults; validating the value
2625
# is optional.  This case statement should set nothing besides
2626
# supported_defaults.
2627
 
2628
supported_defaults=
2629
case "${target}" in
2630
        alpha*-*-*)
2631
                supported_defaults="cpu tune"
2632
                for which in cpu tune; do
2633
                        eval "val=\$with_$which"
2634
                        case "$val" in
2635
                        "" \
2636
                        | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
2637
                        | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
2638
                        | 21264a)
2639
                                ;;
2640
                        *)
2641
                                echo "Unknown CPU used in --with-$which=$val" 1>&2
2642
                                exit 1
2643
                                ;;
2644
                        esac
2645
                done
2646
                ;;
2647
 
2648
        arm*-*-*)
2649
                supported_defaults="arch cpu float tune fpu abi mode"
2650
                for which in cpu tune; do
2651
                        # See if it matches any of the entries in arm-cores.def
2652
                        eval "val=\$with_$which"
2653
                        if [ x"$val" = x ] \
2654
                            || grep "^ARM_CORE(\"$val\"," \
2655
                                    ${srcdir}/config/arm/arm-cores.def \
2656
                                    > /dev/null; then
2657
                          # Ok
2658
                          new_val=`grep "^ARM_CORE(\"$val\"," \
2659
                                ${srcdir}/config/arm/arm-cores.def | \
2660
                                sed -e 's/^[^,]*,[      ]*//' | \
2661
                                sed -e 's/,.*$//'`
2662
                          eval "target_${which}_cname=$new_val"
2663
                        echo "For $val real value is $new_val"
2664
                          true
2665
                        else
2666
                          echo "Unknown CPU used in --with-$which=$val" 1>&2
2667
                          exit 1
2668
                        fi
2669
                done
2670
 
2671
                case "$with_arch" in
2672
                "" \
2673
                | armv[23456] | armv2a | armv3m | armv4t | armv5t \
2674
                | armv5te | armv6j |armv6k | armv6z | armv6zk \
2675
                | iwmmxt | ep9312)
2676
                        # OK
2677
                        ;;
2678
                *)
2679
                        echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2680
                        exit 1
2681
                        ;;
2682
                esac
2683
 
2684
                case "$with_float" in
2685
                "" \
2686
                | soft | hard | softfp)
2687
                        # OK
2688
                        ;;
2689
                *)
2690
                        echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2691
                        exit 1
2692
                        ;;
2693
                esac
2694
 
2695
                case "$with_fpu" in
2696
                "" \
2697
                | fpa | fpe2 | fpe3 | maverick | vfp )
2698
                        # OK
2699
                        ;;
2700
                *)
2701
                        echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
2702
                        exit 1
2703
                        ;;
2704
                esac
2705
 
2706
                case "$with_abi" in
2707
                "" \
2708
                | apcs-gnu | atpcs | aapcs | iwmmxt )
2709
                        #OK
2710
                        ;;
2711
                *)
2712
                        echo "Unknown ABI used in --with-abi=$with_abi"
2713
                        exit 1
2714
                        ;;
2715
                esac
2716
 
2717
                case "$with_mode" in
2718
                "" \
2719
                | arm | thumb )
2720
                        #OK
2721
                        ;;
2722
                *)
2723
                        echo "Unknown mode used in --with-mode=$with_mode"
2724
                        exit 1
2725
                        ;;
2726
                esac
2727
 
2728
                if test "x$with_arch" != x && test "x$with_cpu" != x; then
2729
                        echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
2730
                fi
2731
                ;;
2732
 
2733
        fr*-*-*linux*)
2734
                supported_defaults=cpu
2735
                case "$with_cpu" in
2736
                fr400) ;;
2737
                fr550) ;;
2738
                *)
2739
                        echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2740
                        exit 1
2741
                        ;;
2742
                esac
2743
                ;;
2744
 
2745
        m68k*-linux*)
2746
                supported_defaults="cpu"
2747
                case "$with_cpu" in
2748
                "" | "m68020" | "m68030" | "m68040" | "m68060" | "m68020-40" | "m68020-60")
2749
                        # OK
2750
                        ;;
2751
                *)
2752
                        echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
2753
                        echo "m68020 m68030 m68040 m68060 m68020-40 m68020-60" 1>&2
2754
                        exit 1
2755
                        ;;
2756
                esac
2757
                ;;
2758
 
2759
        hppa*-*-* | parisc*-*-*)
2760
                supported_defaults="arch schedule"
2761
 
2762
                case "$with_arch" in
2763
                "" | 1.0 | 1.1 | 2.0)
2764
                        # OK
2765
                        ;;
2766
                *)
2767
                        echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
2768
                        exit 1
2769
                        ;;
2770
                esac
2771
 
2772
                case "$with_schedule" in
2773
                "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
2774
                        # OK
2775
                        ;;
2776
                *)
2777
                        echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
2778
                        exit 1
2779
                        ;;
2780
                esac
2781
                ;;
2782
 
2783
        i[34567]86-*-* | x86_64-*-*)
2784
                supported_defaults="arch cpu tune"
2785
                for which in arch cpu tune; do
2786
                        eval "val=\$with_$which"
2787
                        case ${val} in
2788
                        i386 | i486 \
2789
                        | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
2790
                        | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
2791
                        | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
2792
                        | athlon-4 | athlon-xp | athlon-mp \
2793
                        | prescott | pentium-m | pentium4m | pentium3m)
2794
                                case "${target}" in
2795
                                  x86_64-*-*)
2796
                                      echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
2797
                                      exit 1
2798
                                      ;;
2799
                                esac
2800
                                # OK
2801
                                ;;
2802
                        "" | k8 | opteron | athlon64 | athlon-fx | nocona | generic)
2803
                                # OK
2804
                                ;;
2805
                        *)
2806
                                echo "Unknown CPU given in --with-$which=$val." 1>&2
2807
                                exit 1
2808
                                ;;
2809
                        esac
2810
                done
2811
                ;;
2812
 
2813
        mips*-*-*)
2814
                supported_defaults="abi arch float tune divide"
2815
 
2816
                case ${with_float} in
2817
                "" | soft | hard)
2818
                        # OK
2819
                        ;;
2820
                *)
2821
                        echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2822
                        exit 1
2823
                        ;;
2824
                esac
2825
 
2826
                case ${with_abi} in
2827
                "" | 32 | o64 | n32 | 64 | eabi)
2828
                        # OK
2829
                        ;;
2830
                *)
2831
                        echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
2832
                        exit 1
2833
                        ;;
2834
                esac
2835
 
2836
                case ${with_divide} in
2837
                "" | breaks | traps)
2838
                        # OK
2839
                        ;;
2840
                *)
2841
                        echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
2842
                        exit 1
2843
                esac
2844
                ;;
2845
 
2846
        mt-*-*)
2847
                supported_defaults="arch"
2848
 
2849
                case "$with_arch" in
2850
                "" \
2851
                | ms1-64-001 \
2852
                | ms1-16-002 \
2853
                | ms1-16-003 \
2854
                | ms2 \
2855
                | "")
2856
                        # OK
2857
                        ;;
2858
                *)
2859
                        echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2860
                        exit 1
2861
                        ;;
2862
                esac
2863
                ;;
2864
 
2865
        powerpc*-*-* | rs6000-*-*)
2866
                supported_defaults="cpu float tune"
2867
 
2868
                for which in cpu tune; do
2869
                        eval "val=\$with_$which"
2870
                        case ${val} in
2871
                        default32 | default64)
2872
                                with_which="with_$which"
2873
                                eval $with_which=
2874
                                ;;
2875
                        405cr)
2876
                                tm_defines="${tm_defines} CONFIG_PPC405CR"
2877
                                eval "with_$which=405"
2878
                                ;;
2879
                        "" | common \
2880
                        | power | power[23456] | powerpc | powerpc64 \
2881
                        | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
2882
                        | 401 | 403 | 405 | 405fp | 440 | 440fp | 505 \
2883
                        | 601 | 602 | 603 | 603e | ec603e | 604 \
2884
                        | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
2885
                        | 854[08] | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5)
2886
                                # OK
2887
                                ;;
2888
                        *)
2889
                                echo "Unknown cpu used in --with-$which=$val." 1>&2
2890
                                exit 1
2891
                                ;;
2892
                        esac
2893
                done
2894
                ;;
2895
 
2896
        s390*-*-*)
2897
                supported_defaults="arch mode tune"
2898
 
2899
                for which in arch tune; do
2900
                        eval "val=\$with_$which"
2901
                        case ${val} in
2902
                        "" | g5 | g6 | z900 | z990 | z9-109)
2903
                                # OK
2904
                                ;;
2905
                        *)
2906
                                echo "Unknown cpu used in --with-$which=$val." 1>&2
2907
                                exit 1
2908
                                ;;
2909
                        esac
2910
                done
2911
 
2912
                case ${with_mode} in
2913
                "" | esa | zarch)
2914
                        # OK
2915
                        ;;
2916
                *)
2917
                        echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
2918
                        exit 1
2919
                        ;;
2920
                esac
2921
                ;;
2922
 
2923
        sh[123456ble]-*-* | sh-*-*)
2924
                supported_defaults="cpu"
2925
                case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
2926
                "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
2927
                        # OK
2928
                        ;;
2929
                m2a | m2a-single | m2a-single-only | m2a-nofpu)
2930
                        ;;
2931
                m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
2932
                        ;;
2933
                *)
2934
                        echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
2935
                        echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
2936
                        echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
2937
                        echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
2938
                        exit 1
2939
                        ;;
2940
                esac
2941
                ;;
2942
        sparc*-*-*)
2943
                supported_defaults="cpu float tune"
2944
 
2945
                for which in cpu tune; do
2946
                        eval "val=\$with_$which"
2947
                        case ${val} in
2948
                        "" | sparc | sparcv9 | sparc64 | sparc86x \
2949
                        | v7 | cypress | v8 | supersparc | sparclite | f930 \
2950
                        | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
2951
                        | v9 | ultrasparc | ultrasparc3 | niagara)
2952
                                # OK
2953
                                ;;
2954
                        *)
2955
                                echo "Unknown cpu used in --with-$which=$val" 1>&2
2956
                                exit 1
2957
                                ;;
2958
                        esac
2959
                done
2960
 
2961
                case ${with_float} in
2962
                "" | soft | hard)
2963
                        # OK
2964
                        ;;
2965
                *)
2966
                        echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2967
                        exit 1
2968
                        ;;
2969
                esac
2970
                ;;
2971
 
2972
        v850*-*-*)
2973
                supported_defaults=cpu
2974
                case ${with_cpu} in
2975
                "" | v850e | v850e1)
2976
                        # OK
2977
                        ;;
2978
                *)
2979
                        echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2980
                        exit 1
2981
                        ;;
2982
                esac
2983
                ;;
2984
esac
2985
 
2986
# Set some miscellaneous flags for particular targets.
2987
target_cpu_default2=
2988
case ${target} in
2989
        alpha*-*-*)
2990
                if test x$gas = xyes
2991
                then
2992
                        target_cpu_default2="MASK_GAS"
2993
                fi
2994
                ;;
2995
 
2996
        arm*-*-*)
2997
                if test x$target_cpu_cname = x
2998
                then
2999
                        target_cpu_default2=TARGET_CPU_generic
3000
                else
3001
                        target_cpu_default2=TARGET_CPU_$target_cpu_cname
3002
                fi
3003
                ;;
3004
 
3005
        m68k*-linux*)
3006
                case "x$with_cpu" in
3007
                x)
3008
                        # The most generic
3009
                        target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)"
3010
                        ;;
3011
                xm68020)
3012
                        target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)"
3013
                        ;;
3014
                xm68030)
3015
                        target_cpu_default2="(MASK_68030|MASK_68020|MASK_68881|MASK_BITFIELD)"
3016
                        ;;
3017
                xm68040)
3018
                        target_cpu_default2="(MASK_68040|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)"
3019
                        ;;
3020
                xm68060)
3021
                        target_cpu_default2="(MASK_68060|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)"
3022
                        ;;
3023
                xm68020-40)
3024
                        target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040)"
3025
                        ;;
3026
                xm68020-60)
3027
                        target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040|MASK_68060)"
3028
                        ;;
3029
                *)
3030
                        echo "Unknown CPU used in --with-cpu=$with_cpu"  1>&2
3031
                        exit 1
3032
                        ;;
3033
                esac
3034
                ;;
3035
 
3036
        hppa*-*-* | parisc*-*-*)
3037
                target_cpu_default2="MASK_BIG_SWITCH"
3038
                if test x$gas = xyes
3039
                then
3040
                        target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
3041
                fi
3042
                ;;
3043
 
3044
        mips*-*-*)
3045
                if test x$gnu_ld = xyes
3046
                then
3047
                        target_cpu_default2="MASK_SPLIT_ADDRESSES"
3048
                fi
3049
                case ${target} in
3050
                        mips*el-*-*)
3051
                                tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
3052
                                ;;
3053
                esac
3054
                if test "x$enable_gofast" = xyes
3055
                then
3056
                        tm_defines="US_SOFTWARE_GOFAST $tm_defines"
3057
                        tmake_file="mips/t-gofast $tmake_file"
3058
                else
3059
                        tmake_file="mips/t-mips $tmake_file"
3060
                fi
3061
                ;;
3062
 
3063
        powerpc*-*-* | rs6000-*-*)
3064
                # FIXME: The PowerPC port uses the value set at compile time,
3065
                # although it's only cosmetic.
3066
                if test "x$with_cpu" != x
3067
                then
3068
                        target_cpu_default2="\\\"$with_cpu\\\""
3069
                fi
3070
                out_file=rs6000/rs6000.c
3071
                c_target_objs="${c_target_objs} rs6000-c.o"
3072
                cxx_target_objs="${cxx_target_objs} rs6000-c.o"
3073
                tmake_file="rs6000/t-rs6000 ${tmake_file}"
3074
 
3075
                if test x$enable_e500_double = xyes
3076
                then
3077
                        tm_file="$tm_file rs6000/e500-double.h"
3078
                fi
3079
                ;;
3080
 
3081
        sh[123456ble]*-*-* | sh-*-*)
3082
                c_target_objs="${c_target_objs} sh-c.o"
3083
                cxx_target_objs="${cxx_target_objs} sh-c.o"
3084
                ;;
3085
 
3086
        sparc*-*-*)
3087
                # Some standard aliases.
3088
                case x$with_cpu in
3089
                xsparc)
3090
                        with_cpu=v7
3091
                        ;;
3092
                xsparcv9 | xsparc64)
3093
                        with_cpu=v9
3094
                        ;;
3095
                esac
3096
 
3097
                # The SPARC port checks this value at compile-time.
3098
                target_cpu_default2="TARGET_CPU_$with_cpu"
3099
                ;;
3100
        v850*-*-*)
3101
                # FIXME: The v850 is "special" in that it does not support
3102
                # runtime CPU selection, only --with-cpu.
3103
                case "x$with_cpu" in
3104
                x)
3105
                        ;;
3106
                xv850e)
3107
                        target_cpu_default2="TARGET_CPU_$with_cpu"
3108
                        ;;
3109
                esac
3110
                ;;
3111
esac
3112
 
3113
t=
3114
all_defaults="abi cpu arch tune schedule float mode fpu divide"
3115
for option in $all_defaults
3116
do
3117
        eval "val=\$with_$option"
3118
        if test -n "$val"; then
3119
                case " $supported_defaults " in
3120
                *" $option "*)
3121
                        ;;
3122
                *)
3123
                        echo "This target does not support --with-$option." 2>&1
3124
                        echo "Valid --with options are: $supported_defaults" 2>&1
3125
                        exit 1
3126
                        ;;
3127
                esac
3128
 
3129
                if test "x$t" = x
3130
                then
3131
                        t="{ \"$option\", \"$val\" }"
3132
                else
3133
                        t="${t}, { \"$option\", \"$val\" }"
3134
                fi
3135
        fi
3136
done
3137
 
3138
if test "x$t" = x
3139
then
3140
        configure_default_options="{ { NULL, NULL} }"
3141
else
3142
        configure_default_options="{ ${t} }"
3143
fi
3144
 
3145
if test "$target_cpu_default2" != ""
3146
then
3147
        if test "$target_cpu_default" != ""
3148
        then
3149
                target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
3150
        else
3151
                target_cpu_default=$target_cpu_default2
3152
        fi
3153
fi

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.