URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gcc-4.2.2/] [gcc/] [testsuite/] [ada/] [acats/] [run_all.sh] - Blame information for rev 856

Go to most recent revision | Details | Compare with Previous | View Log


#!/bin/sh
# Run ACATS with the GNU Ada compiler
 
# The following functions are to be customized if you run in cross
# environment or want to change compilation flags.  Note that for
# tests requiring checks not turned on by default, this script
# automatically adds the needed flags to pass (ie: -gnato or -gnatE).
 
# gccflags="-O3 -fomit-frame-pointer -funroll-all-loops -finline-functions"
# gnatflags="-gnatN"
 
gccflags="-O2"
gnatflags="-gnatws"
 
target_run () {
$*
}
 
# End of customization section.
 
display_noeol () {
  printf "$@"
  printf "$@" >> $dir/acats.sum
  printf "$@" >> $dir/acats.log
}
 
display () {
  echo "$@"
  echo "$@" >> $dir/acats.sum
  echo "$@" >> $dir/acats.log
}
 
log () {
  echo "$@" >> $dir/acats.sum
  echo "$@" >> $dir/acats.log
}
 
dir=`${PWDCMD-pwd}`
 
if [ "$testdir" = "" ]; then
   echo You must use make check or make check-ada
   exit 1
fi
 
if [ "$dir" = "$testdir" ]; then
  echo "error: srcdir must be different than objdir, exiting."
  exit 1
fi
 
target_gnatchop () {
  gnatchop --GCC="$GCC_DRIVER" $*
}
 
target_gnatmake () {
  echo gnatmake --GCC=\"$GCC\" $gnatflags $gccflags $* -largs $EXTERNAL_OBJECTS --GCC=\"$GCC\"
  gnatmake --GCC="$GCC" $gnatflags $gccflags $* -largs $EXTERNAL_OBJECTS --GCC="$GCC"
}
 
target_gcc () {
  $GCC $gccflags $*
}
 
clean_dir () {
  rm -f "$binmain" *.o *.ali > /dev/null 2>&1
}
 
find_main () {
  ls ${i}?.adb > ${i}.lst 2> /dev/null
  ls ${i}*m.adb >> ${i}.lst 2> /dev/null
  ls ${i}.adb >> ${i}.lst 2> /dev/null
  main=`tail -1 ${i}.lst`
}
 
EXTERNAL_OBJECTS=""
# Global variable to communicate external objects to link with.
 
rm -f $dir/acats.sum $dir/acats.log
 
display "               === acats configuration ==="
 
target=`$GCC -dumpmachine`
 
display target gcc is $GCC
display `$GCC -v 2>&1`
display host=`gcc -dumpmachine`
display target=$target
display `type gnatmake`
gnatls -v >> $dir/acats.log
display ""
 
display "               === acats support ==="
display_noeol "Generating support files..."
 
rm -rf $dir/support
mkdir -p $dir/support
cd $dir/support
 
cp $testdir/support/*.ada $testdir/support/*.a $testdir/support/*.tst $dir/support
 
# Find out the size in bit of an address on the target
target_gnatmake $testdir/support/impbit.adb >> $dir/acats.log 2>&1
target_run $dir/support/impbit > $dir/support/impbit.out 2>&1
target_bit=`cat $dir/support/impbit.out`
echo target_bit="$target_bit" >> $dir/acats.log
 
# Find out a suitable asm statement
# Adapted from configure.ac gcc_cv_as_dwarf2_debug_line
case "$target" in
  ia64*-*-* | s390*-*-*)
    target_insn="nop 0"
    ;;
  mmix-*-*)
    target_insn="swym 0"
    ;;
  *)
    target_insn="nop"
    ;;
esac
echo target_insn="$target_insn" >> $dir/acats.log
 
sed -e "s,ACATS4GNATDIR,$dir,g" \
  < $testdir/support/impdef.a > $dir/support/impdef.a
sed -e "s,ACATS4GNATDIR,$dir,g" \
  -e "s,ACATS4GNATBIT,$target_bit,g" \
  -e "s,ACATS4GNATINSN,$target_insn,g" \
  < $testdir/support/macro.dfs > $dir/support/MACRO.DFS
sed -e "s,ACATS4GNATDIR,$dir,g" \
  < $testdir/support/tsttests.dat > $dir/support/TSTTESTS.DAT
 
cp $testdir/tests/cd/*.c $dir/support
cp $testdir/tests/cxb/*.c $dir/support
 
rm -rf $dir/run
mv $dir/tests $dir/tests.$$ 2> /dev/null
rm -rf $dir/tests.$$ &
mkdir -p $dir/run
 
cp -pr $testdir/tests $dir/
 
for i in $dir/support/*.ada $dir/support/*.a; do
   host_gnatchop $i >> $dir/acats.log 2>&1
done
 
# These tools are used to preprocess some ACATS sources
# they need to be compiled native on the host.
 
host_gnatmake -q -gnatws macrosub.adb
if [ $? -ne 0 ]; then
   display "**** Failed to compile macrosub"
   exit 1
fi
./macrosub > macrosub.out 2>&1
 
gcc -c cd300051.c
host_gnatmake -q -gnatws widechr.adb
if [ $? -ne 0 ]; then
   display "**** Failed to compile widechr"
   exit 1
fi
./widechr > widechr.out 2>&1
 
rm -f $dir/support/macrosub
rm -f $dir/support/widechr
rm -f $dir/support/*.ali
rm -f $dir/support/*.o
 
display " done."
 
# From here, all compilations will be made by the target compiler
 
display_noeol "Compiling support files..."
 
target_gcc -c *.c
if [ $? -ne 0 ]; then
   display "**** Failed to compile C code"
   exit 1
fi
 
target_gnatchop *.adt >> $dir/acats.log 2>&1
 
target_gnatmake -c -gnato -gnatE *.ads >> $dir/acats.log 2>&1
target_gnatmake -c -gnato -gnatE *.adb >> $dir/acats.log 2>&1
 
display " done."
display ""
display "               === acats tests ==="
 
if [ $# -eq 0 ]; then
   chapters=`cd $dir/tests; echo [a-z]*`
else
   chapters=$*
fi
 
glob_countn=0
glob_countok=0
glob_countu=0
 
for chapter in $chapters; do
   display Running chapter $chapter ...
 
   if [ ! -d $dir/tests/$chapter ]; then
      display "*** CHAPTER $chapter does not exist, skipping."
      display ""
      continue
   fi
 
   cd $dir/tests/$chapter
   ls *.a *.ada *.adt *.am *.dep 2> /dev/null | sed -e 's/\(.*\)\..*/\1/g' | \
   cut -c1-7 | sort | uniq | comm -23 - $testdir/norun.lst \
     > $dir/tests/$chapter/${chapter}.lst
   countn=`wc -l < $dir/tests/$chapter/${chapter}.lst`
   glob_countn=`expr $glob_countn + $countn`
   counti=0
   for i in `cat $dir/tests/$chapter/${chapter}.lst`; do
      counti=`expr $counti + 1`
      extraflags=""
      grep $i $testdir/overflow.lst > /dev/null 2>&1
      if [ $? -eq 0 ]; then
         extraflags="$extraflags -gnato"
      fi
      grep $i $testdir/elabd.lst > /dev/null 2>&1
      if [ $? -eq 0 ]; then
         extraflags="$extraflags -gnatE"
      fi
      grep $i $testdir/stackcheck.lst > /dev/null 2>&1
      if [ $? -eq 0 ]; then
         extraflags="$extraflags -fstack-check"
      fi
      grep $i $testdir/ada95.lst > /dev/null 2>&1
      if [ $? -eq 0 ]; then
         extraflags="$extraflags -gnat95"
      fi
      test=$dir/tests/$chapter/$i
      mkdir $test && cd $test >> $dir/acats.log 2>&1
 
      if [ $? -ne 0 ]; then
         display "FAIL: $i"
         failed="${failed}${i} "
         clean_dir
         continue
      fi
 
      target_gnatchop -c -w `ls ${test}*.a ${test}*.ada ${test}*.adt ${test}*.am ${test}*.dep 2> /dev/null` >> $dir/acats.log 2>&1
      main=""
      find_main
      if [ -z "$main" ]; then
         sync
         find_main
      fi
      binmain=`echo $main | sed -e 's/\(.*\)\..*/\1/g'`
      echo "BUILD $main" >> $dir/acats.log
      EXTERNAL_OBJECTS=""
      case $i in
        cxb30*) EXTERNAL_OBJECTS="$dir/support/cxb30040.o $dir/support/cxb30060.o $dir/support/cxb30130.o $dir/support/cxb30131.o";;
        ca1020e) rm -f ca1020e_func1.adb ca1020e_func2.adb ca1020e_proc1.adb ca1020e_proc2.adb > /dev/null 2>&1;;
        ca14028) rm -f ca14028_func2.ads ca14028_func3.ads ca14028_proc1.ads ca14028_proc3.ads > /dev/null 2>&1;;
        cxh1001) extraflags="-a -f"; echo "pragma Normalize_Scalars;" > gnat.adc
      esac
      if [ "$main" = "" ]; then
         display "FAIL: $i"
         failed="${failed}${i} "
         clean_dir
         continue
      fi
 
      target_gnatmake $extraflags -I$dir/support $main >> $dir/acats.log 2>&1
      if [ $? -ne 0 ]; then
         display "FAIL: $i"
         failed="${failed}${i} "
         clean_dir
         continue
      fi
 
      echo "RUN $binmain" >> $dir/acats.log
      cd $dir/run
      if [ ! -x $dir/tests/$chapter/$i/$binmain ]; then
         sync
      fi
      target_run $dir/tests/$chapter/$i/$binmain > $dir/tests/$chapter/$i/${i}.log 2>&1
      cd $dir/tests/$chapter/$i
      cat ${i}.log >> $dir/acats.log
      egrep -e '(==== |\+\+\+\+ |\!\!\!\! )' ${i}.log > /dev/null 2>&1
      if [ $? -ne 0 ]; then
         grep 'Tasking not implemented' ${i}.log > /dev/null 2>&1
 
         if [ $? -ne 0 ]; then
            display "FAIL:      $i"
            failed="${failed}${i} "
         else
            log "UNSUPPORTED:   $i"
            glob_countn=`expr $glob_countn - 1`
            glob_countu=`expr $glob_countu + 1`
         fi
      else
         log "PASS:     $i"
         glob_countok=`expr $glob_countok + 1`
      fi
      clean_dir
   done
done
 
display "               === acats Summary ==="
display "# of expected passes           $glob_countok"
display "# of unexpected failures       `expr $glob_countn - $glob_countok`"
 
if [ $glob_countu -ne 0 ]; then
   display "# of unsupported tests              $glob_countu"
fi
 
if [ $glob_countok -ne $glob_countn ]; then
   display "*** FAILURES: $failed"
fi
 
exit 0

Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gcc-4.2.2/] [gcc/] [testsuite/] [ada/] [acats/] [run_all.sh] - Blame information for rev 856

Line No.	Rev	Author	Line
1	149	jeremybenn	`#!/bin/sh`
2			`# Run ACATS with the GNU Ada compiler`
3
4			`# The following functions are to be customized if you run in cross`
5			`# environment or want to change compilation flags. Note that for`
6			`# tests requiring checks not turned on by default, this script`
7			`# automatically adds the needed flags to pass (ie: -gnato or -gnatE).`
8
9			`# gccflags="-O3 -fomit-frame-pointer -funroll-all-loops -finline-functions"`
10			`# gnatflags="-gnatN"`
11
12			`gccflags="-O2"`
13			`gnatflags="-gnatws"`
14
15			`target_run () {`
16			`$*`
17			`}`
18
19			`# End of customization section.`
20
21			`display_noeol () {`
22			`printf "$@"`
23			`printf "$@" >> $dir/acats.sum`
24			`printf "$@" >> $dir/acats.log`
25			`}`
26
27			`display () {`
28			`echo "$@"`
29			`echo "$@" >> $dir/acats.sum`
30			`echo "$@" >> $dir/acats.log`
31			`}`
32
33			`log () {`
34			`echo "$@" >> $dir/acats.sum`
35			`echo "$@" >> $dir/acats.log`
36			`}`
37
38			dir=`${PWDCMD-pwd}`
39
40			`if [ "$testdir" = "" ]; then`
41			`echo You must use make check or make check-ada`
42			`exit 1`
43			`fi`
44
45			`if [ "$dir" = "$testdir" ]; then`
46			`echo "error: srcdir must be different than objdir, exiting."`
47			`exit 1`
48			`fi`
49
50			`target_gnatchop () {`
51			`gnatchop --GCC="$GCC_DRIVER" $*`
52			`}`
53
54			`target_gnatmake () {`
55			`echo gnatmake --GCC=\"$GCC\" $gnatflags $gccflags $* -largs $EXTERNAL_OBJECTS --GCC=\"$GCC\"`
56			`gnatmake --GCC="$GCC" $gnatflags $gccflags $* -largs $EXTERNAL_OBJECTS --GCC="$GCC"`
57			`}`
58
59			`target_gcc () {`
60			`$GCC $gccflags $*`
61			`}`
62
63			`clean_dir () {`
64			`rm -f "$binmain" .o .ali > /dev/null 2>&1`
65			`}`
66
67			`find_main () {`
68			`ls ${i}?.adb > ${i}.lst 2> /dev/null`
69			`ls ${i}*m.adb >> ${i}.lst 2> /dev/null`
70			`ls ${i}.adb >> ${i}.lst 2> /dev/null`
71			main=`tail -1 ${i}.lst`
72			`}`
73
74			`EXTERNAL_OBJECTS=""`
75			`# Global variable to communicate external objects to link with.`
76
77			`rm -f $dir/acats.sum $dir/acats.log`
78
79			`display " === acats configuration ==="`
80
81			target=`$GCC -dumpmachine`
82
83			`display target gcc is $GCC`
84			display `$GCC -v 2>&1`
85			display host=`gcc -dumpmachine`
86			`display target=$target`
87			display `type gnatmake`
88			`gnatls -v >> $dir/acats.log`
89			`display ""`
90
91			`display " === acats support ==="`
92			`display_noeol "Generating support files..."`
93
94			`rm -rf $dir/support`
95			`mkdir -p $dir/support`
96			`cd $dir/support`
97
98			`cp $testdir/support/.ada $testdir/support/.a $testdir/support/*.tst $dir/support`
99
100			`# Find out the size in bit of an address on the target`
101			`target_gnatmake $testdir/support/impbit.adb >> $dir/acats.log 2>&1`
102			`target_run $dir/support/impbit > $dir/support/impbit.out 2>&1`
103			target_bit=`cat $dir/support/impbit.out`
104			`echo target_bit="$target_bit" >> $dir/acats.log`
105
106			`# Find out a suitable asm statement`
107			`# Adapted from configure.ac gcc_cv_as_dwarf2_debug_line`
108			`case "$target" in`
109			`ia64--* \| s390--*)`
110			`target_insn="nop 0"`
111			`;;`
112			`mmix--)`
113			`target_insn="swym 0"`
114			`;;`
115			`*)`
116			`target_insn="nop"`
117			`;;`
118			`esac`
119			`echo target_insn="$target_insn" >> $dir/acats.log`
120
121			`sed -e "s,ACATS4GNATDIR,$dir,g" \`
122			`< $testdir/support/impdef.a > $dir/support/impdef.a`
123			`sed -e "s,ACATS4GNATDIR,$dir,g" \`
124			`-e "s,ACATS4GNATBIT,$target_bit,g" \`
125			`-e "s,ACATS4GNATINSN,$target_insn,g" \`
126			`< $testdir/support/macro.dfs > $dir/support/MACRO.DFS`
127			`sed -e "s,ACATS4GNATDIR,$dir,g" \`
128			`< $testdir/support/tsttests.dat > $dir/support/TSTTESTS.DAT`
129
130			`cp $testdir/tests/cd/*.c $dir/support`
131			`cp $testdir/tests/cxb/*.c $dir/support`
132
133			`rm -rf $dir/run`
134			`mv $dir/tests $dir/tests.$$ 2> /dev/null`
135			`rm -rf $dir/tests.$$ &`
136			`mkdir -p $dir/run`
137
138			`cp -pr $testdir/tests $dir/`
139
140			`for i in $dir/support/.ada $dir/support/.a; do`
141			`host_gnatchop $i >> $dir/acats.log 2>&1`
142			`done`
143
144			`# These tools are used to preprocess some ACATS sources`
145			`# they need to be compiled native on the host.`
146
147			`host_gnatmake -q -gnatws macrosub.adb`
148			`if [ $? -ne 0 ]; then`
149			`display "**** Failed to compile macrosub"`
150			`exit 1`
151			`fi`
152			`./macrosub > macrosub.out 2>&1`
153
154			`gcc -c cd300051.c`
155			`host_gnatmake -q -gnatws widechr.adb`
156			`if [ $? -ne 0 ]; then`
157			`display "**** Failed to compile widechr"`
158			`exit 1`
159			`fi`
160			`./widechr > widechr.out 2>&1`
161
162			`rm -f $dir/support/macrosub`
163			`rm -f $dir/support/widechr`
164			`rm -f $dir/support/*.ali`
165			`rm -f $dir/support/*.o`
166
167			`display " done."`
168
169			`# From here, all compilations will be made by the target compiler`
170
171			`display_noeol "Compiling support files..."`
172
173			`target_gcc -c *.c`
174			`if [ $? -ne 0 ]; then`
175			`display "**** Failed to compile C code"`
176			`exit 1`
177			`fi`
178
179			`target_gnatchop *.adt >> $dir/acats.log 2>&1`
180
181			`target_gnatmake -c -gnato -gnatE *.ads >> $dir/acats.log 2>&1`
182			`target_gnatmake -c -gnato -gnatE *.adb >> $dir/acats.log 2>&1`
183
184			`display " done."`
185			`display ""`
186			`display " === acats tests ==="`
187
188			`if [ $# -eq 0 ]; then`
189			chapters=`cd $dir/tests; echo [a-z]*`
190			`else`
191			`chapters=$*`
192			`fi`
193
194			`glob_countn=0`
195			`glob_countok=0`
196			`glob_countu=0`
197
198			`for chapter in $chapters; do`
199			`display Running chapter $chapter ...`
200
201			`if [ ! -d $dir/tests/$chapter ]; then`
202			`display "*** CHAPTER $chapter does not exist, skipping."`
203			`display ""`
204			`continue`
205			`fi`
206
207			`cd $dir/tests/$chapter`
208			`ls .a .ada .adt .am .dep 2> /dev/null \| sed -e 's/\(.\)\..*/\1/g' \| \`
209			`cut -c1-7 \| sort \| uniq \| comm -23 - $testdir/norun.lst \`
210			`> $dir/tests/$chapter/${chapter}.lst`
211			countn=`wc -l < $dir/tests/$chapter/${chapter}.lst`
212			glob_countn=`expr $glob_countn + $countn`
213			`counti=0`
214			for i in `cat $dir/tests/$chapter/${chapter}.lst`; do
215			counti=`expr $counti + 1`
216			`extraflags=""`
217			`grep $i $testdir/overflow.lst > /dev/null 2>&1`
218			`if [ $? -eq 0 ]; then`
219			`extraflags="$extraflags -gnato"`
220			`fi`
221			`grep $i $testdir/elabd.lst > /dev/null 2>&1`
222			`if [ $? -eq 0 ]; then`
223			`extraflags="$extraflags -gnatE"`
224			`fi`
225			`grep $i $testdir/stackcheck.lst > /dev/null 2>&1`
226			`if [ $? -eq 0 ]; then`
227			`extraflags="$extraflags -fstack-check"`
228			`fi`
229			`grep $i $testdir/ada95.lst > /dev/null 2>&1`
230			`if [ $? -eq 0 ]; then`
231			`extraflags="$extraflags -gnat95"`
232			`fi`
233			`test=$dir/tests/$chapter/$i`
234			`mkdir $test && cd $test >> $dir/acats.log 2>&1`
235
236			`if [ $? -ne 0 ]; then`
237			`display "FAIL: $i"`
238			`failed="${failed}${i} "`
239			`clean_dir`
240			`continue`
241			`fi`
242
243			target_gnatchop -c -w `ls ${test}.a ${test}.ada ${test}.adt ${test}.am ${test}*.dep 2> /dev/null` >> $dir/acats.log 2>&1
244			`main=""`
245			`find_main`
246			`if [ -z "$main" ]; then`
247			`sync`
248			`find_main`
249			`fi`
250			binmain=`echo $main \| sed -e 's/\(.\)\../\1/g'`
251			`echo "BUILD $main" >> $dir/acats.log`
252			`EXTERNAL_OBJECTS=""`
253			`case $i in`
254			`cxb30*) EXTERNAL_OBJECTS="$dir/support/cxb30040.o $dir/support/cxb30060.o $dir/support/cxb30130.o $dir/support/cxb30131.o";;`
255			`ca1020e) rm -f ca1020e_func1.adb ca1020e_func2.adb ca1020e_proc1.adb ca1020e_proc2.adb > /dev/null 2>&1;;`
256			`ca14028) rm -f ca14028_func2.ads ca14028_func3.ads ca14028_proc1.ads ca14028_proc3.ads > /dev/null 2>&1;;`
257			`cxh1001) extraflags="-a -f"; echo "pragma Normalize_Scalars;" > gnat.adc`
258			`esac`
259			`if [ "$main" = "" ]; then`
260			`display "FAIL: $i"`
261			`failed="${failed}${i} "`
262			`clean_dir`
263			`continue`
264			`fi`
265
266			`target_gnatmake $extraflags -I$dir/support $main >> $dir/acats.log 2>&1`
267			`if [ $? -ne 0 ]; then`
268			`display "FAIL: $i"`
269			`failed="${failed}${i} "`
270			`clean_dir`
271			`continue`
272			`fi`
273
274			`echo "RUN $binmain" >> $dir/acats.log`
275			`cd $dir/run`
276			`if [ ! -x $dir/tests/$chapter/$i/$binmain ]; then`
277			`sync`
278			`fi`
279			`target_run $dir/tests/$chapter/$i/$binmain > $dir/tests/$chapter/$i/${i}.log 2>&1`
280			`cd $dir/tests/$chapter/$i`
281			`cat ${i}.log >> $dir/acats.log`
282			`egrep -e '(==== \|\+\+\+\+ \|\!\!\!\! )' ${i}.log > /dev/null 2>&1`
283			`if [ $? -ne 0 ]; then`
284			`grep 'Tasking not implemented' ${i}.log > /dev/null 2>&1`
285
286			`if [ $? -ne 0 ]; then`
287			`display "FAIL: $i"`
288			`failed="${failed}${i} "`
289			`else`
290			`log "UNSUPPORTED: $i"`
291			glob_countn=`expr $glob_countn - 1`
292			glob_countu=`expr $glob_countu + 1`
293			`fi`
294			`else`
295			`log "PASS: $i"`
296			glob_countok=`expr $glob_countok + 1`
297			`fi`
298			`clean_dir`
299			`done`
300			`done`
301
302			`display " === acats Summary ==="`
303			`display "# of expected passes $glob_countok"`
304			display "# of unexpected failures `expr $glob_countn - $glob_countok`"
305
306			`if [ $glob_countu -ne 0 ]; then`
307			`display "# of unsupported tests $glob_countu"`
308			`fi`
309
310			`if [ $glob_countok -ne $glob_countn ]; then`
311			`display "*** FAILURES: $failed"`
312			`fi`
313
314			`exit 0`